TY - CONF A1 - Wosniok, Aleksander A1 - Krebber, Katerina ED - Karabay, G. ED - Kara, S. T1 - Smart geosynthetics for structural health monitoring using fully distributed fiber optic sensors N2 - We report on the development of a complete system for structural health monitaring of large-scale geotechnical structures. The system uses Brillouin frequency domain analysis (BOFDA) for distributed measurement of strain and temperature along glass optical fibers (GOFs) by determining the so-called Brillouin frequency shift (BFS). ln a number of research activities we managed to optimize the BOFDA measurement setup regarding the spatial resolution and the accuracy of the measured quantities. Moreover, we realized a simultaneaus measurement of strain and temperature by using nonzero dispersion-shifted fibers (NZDSFs) with several multiple Brillouin scattering resonances. ln cooperation with our German and ltalian industry partners we finally succeeded in fabricating low-attenuation smart geosynthetics as a sensor component of a fully distributed Brillouin-based fiber optic monitaring system. T2 - 6th International Technical Textiles Congress CY - Izmir, Turkey DA - 14.10.2015 KW - Brillouin scattering KW - Distributed sensor KW - Fiberoptic sensor KW - Optical fiber KW - Structural health monitoring PY - 2015 SN - 978-975-441-448-6 SP - 215 EP - 218 PB - Meta Basim Pr. AN - OPUS4-34772 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kasinathan, M. A1 - Babu Rao, C. A1 - Murali, N. A1 - Jayakumar, T. A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Bond monitoring in temperature dependent applications using Brillouin optical time domain analyser N2 - Adhesive bond has to be evaluated for its integrity over a range of temperature. Adhesive is being used to bond the sensors with structures. There is no validated technique to test its performance. In this paper, we propose a Brillouin Optical Time Domain Analyzer (BOTDA) based methodology to detect temperature-induced adhesive bond failure below room temperature using distributed fiber optic sensor. The differential coefficient of thermal expansion of the structure and fiber sensor can lead to bond failure at low temperature. Optical fiber impregnated in the structure will experience differential temperature/strain due to debond of the adhesive. This leads to the frequency and amplitude decomposition of the Brillouin spectra. This is a good indication for real-time monitoring of the integrity of a bond. KW - Adhesive bond KW - Brillouin scattering KW - optical fiber sensor KW - Brillouin optical time domain analysis KW - distributed sensor PY - 2016 DO - https://doi.org/10.1007/s12596-015-0266-5 VL - 45 IS - 1 SP - 44 EP - 49 PB - Springer AN - OPUS4-37923 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Krebber, Katerina A1 - Glötzl, R. ED - Boller, C. T1 - Temperature-corrected determination of mechanical deformations in geotechnical structures using Brillouin-based fiber optic sensors N2 - Structural Health Monitoring based on distributed Brillouin measuring techniques has been playing bigger and bigger role for applications in large-scale critical structures over the last decade. The Brillouin sensing techniques make use of low-loss single-mode optical fibers as distributed sensors allowing compound strain and temperature profile discrimination along the measured section even over several tens of kilometers. Thereby, the measured Brillouin frequency shift (BFS) features much stronger dependence on the longitudinal strain in the sensor fiber than on the temperature distribution along the fiber optic sensor. By detection of slight structural changes in monitored civil structures, such as dams, pipelines and tunnels, the influence of temperature on the measured BFS cannot be neglected. In simple cases of fiber optic sensors embedded deeply enough into earth structures no significant temperature gradients caused by weather conditions such as sunrays could be observed. The temperature contributes here only to the signal offset and the local mechanical deformations arisen due to soil displacement can be read directly from the distribution of the BFS. Also special cable solutions for separate determination of temperature and strain have been tested by us under field conditions. The use of two separate optical fibers for strain and temperature detection limits the spatial resolution and measurement accuracy in the determination of both physical quantities. In search of the optimal sensory solution for monitoring of mechanical deformations taking into account the temperature component in the measured signal the use of so called nonzero dispersion-shifted fibers has been investigated in several laboratory tests. Due to different doping concentration in the core new resonance acoustic modes can propagate in such optical fibers which results in multipeak structure in the Brillouin gain spectrum (BGS). The appearance of more than one resonance peak in the BGS offers the possibility to realize simultaneous measurement of longitudinal strain and temperature by analysis of applicable BFSs as function of both physical quantities using only one low cost optical fiber. T2 - EWSHM'12 - 6th European workshop on structural health monitoring 2012 CY - Dresden, Germany DA - 03.07.2012 KW - Structural health monitoring KW - Brillouin scattering KW - Distributed sensor PY - 2012 SN - 978-3-940283-41-2 VL - 1 SP - 417 EP - 422 CY - Berlin AN - OPUS4-26311 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Sporea, D. A1 - Neguţ, D. A1 - Krebber, Katerina T1 - Gamma radiation influence on silica optical fibers measured by optical backscatter reflectometry and Brillouin sensing technique N2 - We have studied the influence of gamma rays on physical properties of different commercially available silica optical fibers stepwise irradiated up to a total dose of 100 kGy. The detection of radiation-induced changes in silica glass offers the possibility of using selected optical fibers as distributed radiation sensors. The measurements performed by us were based on optical backscatter reflectometry and Brillouin distributed sensing. The measurement methods enable an analysis of radiation-induced modification of the group refractive index and density of the optical fibers. The most distinct physical effect observed by us concerns the increase of the optical attenuation with rising total radiation doses. Quantitative measurement results indicate a crucial impact of fiber dopants on radiation-induced physical and sensory characteristics of silica optical fibers affected by differences in fiber fabrication techniques. Based on the obtained results, the suitability of distributed Brillouin sensing for dosimetry applications seems to be improved by modifying the refractive index profile of the fiber core. T2 - Sixth European Workshop on Optical Fibre Sensors CY - Limerick, IRL DA - 31.05.2016 KW - Brillouin frequency shift KW - Lonizing radiation KW - Gamma radiation KW - Radiation dosimetry KW - Optical fiber sensor KW - Brillouin scattering KW - Distributed measurement KW - Backscatter reflectometry PY - 2016 SN - 978-1-5106-0219-9 DO - https://doi.org/10.1117/12.2236678 SN - 0277-786X VL - 9916 SP - Article Number: 99162J PB - Spie-Int Soc Optical Engineering CY - Bellingham, WA, USA AN - OPUS4-37083 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Gamma radiation influence on silica optical fibers measured by optical backscatter reflectometry and Brillouin sensing technique N2 - We have studied the influence of gamma rays on physical properties of different commercially available silica optical fibers stepwise irradiated up to a total dose of 100 kGy. The detection of radiation-induced changes in silica glass offers the possibility of using selected optical fibers as distributed radiation sensors. The measurements performed by us were based on optical backscatter reflectometry and Brillouin distributed sensing. The measurement methods enable an analysis of radiation-induced modification of the group refractive index and density of the optical fibers. The most distinct physical effect observed by us concerns the increase of the optical attenuation with rising total radiation doses. Quantitative measurement results indicate a crucial impact of fiber dopants on radiation-induced physical and sensory characteristics of silica optical fibers affected by differences in fiber fabrication techniques. Based on the obtained results, the suitability of distributed Brillouin sensing for dosimetry applications seems to be improved by modifying the refractive index profile of the fiber core. T2 - Sixth European Workshop on Optical Fibre Sensors CY - Limerick, IRL DA - 31.05.2016 KW - Brillouin frequency shift KW - Ionizing radiation KW - Gamma radiation KW - Radiation dosimetry KW - Optical fiber sensor KW - Brillouin scattering KW - Distributed measurement KW - Backscatter reflectometry PY - 2016 AN - OPUS4-37088 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Nöther, Nils A1 - Wosniok, Aleksander A1 - Krebber, Katerina ED - Francis Berghmans, ED - Mignani, Anna Grazia ED - Cutolo, Antonello ED - Patrick P. Meyrueis, ED - Thomas P. Pearsall, T1 - A distributed fiber optic sensor system for dike monitoring using Brillouin frequency domain analysis T2 - Optical Sensors 2008, April 7-10, 2008 CY - Strasbourg, France DA - 2008-04-07 KW - BOFDA KW - Brillouin sensing KW - Distributed strain measurement KW - Dike monitoring KW - Sensor-based geotextiles KW - Fibre optic sensors KW - Distributed sensors KW - Brillouin scattering PY - 2008 SN - 978-0-8194-7201-4 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE IS - 7003 SP - 700303-1 - 700303-9 PB - SPIE CY - Bellingham AN - OPUS4-18274 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Nöther, Nils A1 - Wosniok, Aleksander A1 - Krebber, Katerina A1 - Thiele, E. ED - Ecke, Wolfgang ED - Kara J. Peters, ED - Norbert G. Meyendorf, T1 - A distributed fiber optic sensor system for dike monitoring using Brillouin optical frequency domain analysis N2 - We report on the development of a complete system for spatially resolved detection of critical soil displacement in river embankments. The system uses Brillouin frequency domain analysis (BOFDA) for distributed measurement of strain in silica optical fibers. Our development consists of the measurement unit, an adequate coating for the optical fibers and a technique to integrate the coated optical fibers into geotextiles as they are commonly used in dike construction. We present several laboratory and field tests that prove the capability of the system to detect areas of soil displacement as small as 2 meters. These are the first tests of truly distributed strain measurements on optical fibers embedded into geosynthetics. T2 - Smart Sensor Phenomena, Technology, Networks, and Systems 2008 CY - San Diego, California, USA DA - 2008-03-10 KW - BOFDA KW - Brillouin sensing KW - Distributed strain measurement KW - Dike monitoring KW - Sensor-based geotextiles KW - Fiber optic sensors KW - Distributed sensors KW - Brillouin scattering PY - 2008 SN - 978-0-8194-7119-2 DO - https://doi.org/10.1117/12.775133 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE IS - 6933 SP - 69330T-1 - 69330T-9 PB - SPIE CY - Bellingham AN - OPUS4-18250 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krebber, Katerina A1 - Lenke, Philipp A1 - Liehr, Sascha A1 - Nöther, N. A1 - Wendt, Mario A1 - Wosniok, Aleksander A1 - Daum, Werner T1 - Structural health monitoring by distributed fiber optic sensors embedded into technical textiles N2 - Technical textiles with embedded distributed fiber optic sensors have been developed for the purposes of structural health monitoring in geotechnical and civil engineering. The distributed fiber optic sensors are based on Brillouin scattering in silica optical fibers and OTDR in polymer optical fibers. Such 'smart' technical textiles are used for reinforcement of geotechnical and masonry structures. The embedded fiber optic sensors provide online information about the condition of the structure and about the occurrence and location of any damage or degradation. N2 - Technische Textilien mit integrierten faseroptischen Sensoren eröffnen neue Möglichkeiten der Zustandsüberwachung (structural health monitoring) in Geotechnik und Ingenieurbau. Die verteilt messenden Sensoren basieren auf der Brillouin-Streuung in Glasfasern und auf der OTDR in polymeroptischen Fasern. Derartige 'intelligente' technische Textilien werden in erster Line zur Verstärkung von geotechnischen Bauwerken und von Gebäuden genutzt. Die integrierten Sensoren liefern eine zeitnahe Information über den bestimmungsgemäßen Zustand des Bauwerks sowie über die Entstehung und den Ort von lokalen Bauwerksschäden. KW - Fiber optic sensor KW - Distributed sensor KW - Brillouin scattering KW - Polymer optical fiber KW - Strain sensor KW - Smart geotextiles KW - Faseroptischer Sensor KW - Verteilter Sensor KW - Brillouin-Streuung KW - Polymeroptische Faser KW - Dehnungssensor KW - Intelligentes Geotextil PY - 2012 DO - https://doi.org/10.1524/teme.2012.0238 SN - 0340-837X SN - 0178-2312 SN - 0171-8096 VL - 79 IS - 7-8 SP - 337 EP - 347 PB - Oldenbourg CY - München AN - OPUS4-26387 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -