TY - CONF A1 - Wosniok, Aleksander T1 - Brillouin-based Fiber Optic Sensor for Geotechnical Monitoring Applications T2 - Workshop on Civil Structural Health Monitoring Applications (CSHM-4) CY - Berlin, Germany DA - 2012-11-06 PY - 2012 AN - OPUS4-26946 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Temperature-corrected Determination of Mechanical Deformations in Geotechnical Structures Using Brillouin-based Fiber Optic Sensors T2 - 6th European Workshop on Structural Health Monitoring CY - Dresden, Germany DA - 2012-07-03 PY - 2012 AN - OPUS4-26463 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Brillouin gain spectrum characterization for temperature compensation in fiber optic distributed strain T2 - 22nd International Conference on Optical Fiber Sensors CY - Beijing, China DA - 2012-10-15 PY - 2012 AN - OPUS4-26796 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Brillouin gain spectrum characteristics for temperature compensation in fiber optic distributed strain T2 - 22nd International Conference on Optical Fiber Sensors (OFS-22) CY - Beijing, China DA - 2012-10-15 PY - 2012 AN - OPUS4-26908 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Mizuno, Y. A1 - Krebber, Katerina A1 - Nakamura, K. ED - Jaroszewicz, L.R. T1 - L-BOFDA: a new sensor technique for distributed Brillouin sensing N2 - We propose a new scheme of Brillouin optical frequency-domain analysis (BOFDA) for distributed fiber-optic strain and temperature sensing, named linear-configured BOFDA (L-BOFDA). In conventional loop-configured BOFDA, light injection into both ends of a fiber under test (FUT) is needed for counter-propagation of pump and probe waves. In contrast, in L-BOFDA, pump and probe waves are injected into the same end of an FUT, and the probe wave Fresnelreflected (or mirror-reflected) at the other end of the FUT is exploited; thus, one-end access is feasible. We show proof-of-concept results of distributed strain measurement in a silica single-mode fiber with L-BOFDA, and discuss the signal-to-noise ratio degradation and the benefit in developing distributed Brillouin sensors based on polymer optical fibers. T2 - EWOFS 2013 - 5th European workshop on optical fibre sensors CY - Kraków, Poland DA - 19.05.2013 KW - Brillouin optical frequency-domain analysis (BOFDA) KW - L-BOFDA KW - Optical fiber sensing KW - Distributed strain measurement KW - Stimulated Brillouin scattering KW - Polymer optical fiber PY - 2013 DO - https://doi.org/10.1117/12.2025378 SN - 0277-786X N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE VL - 8794 IS - Paper 8794 - 181 SP - 879431-1 EP - 879431-4 AN - OPUS4-28961 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Patrick P. A1 - Wosniok, Aleksander A1 - Lazik, D. A1 - Bartholmai, Matthias T1 - Test field for the validation of a multifunctional sensor for distributed subsurface monitoring of gas storage areas N2 - BAM Federal Institute for Materials Research and Testing, in cooperation with the company MeGaSen UG carries out a research project to enhance and validate an innovative approach for distributed subsurface monitoring of gas storage areas. The concept combines different measurement technologies to one multifunctional sensor: membrane-based gas measurement technology for in-situ monitoring of gases in soil and fiber optical sensing of temperature and strain (as a measure for structural change). Key aspect of the research project is the first-time validation of the system in an application relevant dimension. For this purpose a 20 x 20 m2 test field is build. A comprehensive validation of the system is carried out by systematic variation of different parameters like position-dependent gasinjection, temperature and mechanical impact. T2 - Sensor 2013 - 16th International conference on sensors and measurement technology CY - Nürnberg, Germany DA - 14.05.2013 KW - Distributed multifunctional sensor KW - Subsurface monitoring KW - Gas storage areas KW - Membrane-based gas sensing KW - Fiber optical sensing PY - 2013 SN - 978-3-9813484-3-9 DO - https://doi.org/10.5162/sensor2013/P2.2 N1 - Serientitel: AMA Conferences – Series title: AMA Conferences SP - 713 EP - 716 AN - OPUS4-28652 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - L-BOFDA: a new sensor technique for distributed Brillouin sensing T2 - 5th European Workshop on Optical Fibre Sensors CY - Kraków, Poland DA - 2013-05-19 PY - 2013 AN - OPUS4-28788 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Distributed fiber optic strain sensing for structural health monitoring of 70 MPa hydrogen vessels N2 - We report on the development and testing of 70 MPa hydrogen pressure vessels with integrated fiber optic sensing fibers for automotive use. The paper deals with the condition monitoring of such composite pressure vessels (CPVs) using the optical backscatter reflectometry (OBR) applied for a distributed fiber optic strain sensing along fully integrated polyimide-coated single-mode glass optical fiber (SM-GOF). The sensing fibers were embedded into the vessel structure by wrapping them over the polymer liner during the manufacturing process of the carbon fiber reinforced polymer (CFRP). Detecting local strain events by the integrated fiber optic sensors can be an opportunity for monitoring the material degradation of CPVs under static and cyclic loading. T2 - 11th European Workshop on Structural Health Monitoring CY - Potsdam, Germany DA - 10.06.2024 KW - Fiber optic sensor KW - Distributed strain sensing KW - Composite pressure vessel KW - Structural health monitoring KW - Fiber-reinforced plastics PY - 2024 AN - OPUS4-60307 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schilling, Richard A1 - Oehrl, A. A1 - Wischerhoff, E. A1 - Wosniok, Aleksander A1 - Schukar, Marcus T1 - Fiber-Optic Thermoresponsive Polymer-based Temperature Sensor for Process Monitoring N2 - We present a high-precision fiber-optic temperature sensor based on a polymer possessing a Lower Critical Solution Temperature (LCST) in aqueous solution encapsulated in a capillary. For a temperature higher than the LCST the transparent homogenous polymer solution changes into a suspension which forms an opaque fluid. The resulting temperature-dependent turbidity influences the transmission characteristics measured using a simple fiber-optic system. The presented development provides a small-sized, robust temperature sensor, patented by the BAM (patent nr.: EP 3 043 161 B1), easy to integrate in many application fields, especially for process monitoring. T2 - European Workshop on Optical Fibre Sensors (EWOFS 2023) CY - Mons, Belgium DA - 23.05.2023 KW - Thermoresponsive polymer KW - Aqueous polymer solution KW - Temperature sensor KW - LCST KW - POF PY - 2023 AN - OPUS4-57739 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - WP6 Different Components and System Prototyping N2 - We report on the development and testing of 70 MPa hydrogen pressure vessels with integrated fibre optic sensors for automotive use as a part of the European SH2APED project. The most research results were achieved in the framework of the Work Package 6. T2 - General Assembly Project SH2APED CY - Brussels, Belgium DA - 25.09.2024 KW - Composite pressure vessel KW - Fibre optic sensor KW - Distributed strain sensing KW - Structural health monitoring KW - Optical backscatter reflectometry PY - 2024 AN - OPUS4-61212 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Distributed fibre optic strain sensing for structural health monitoring of composite pressure vessels N2 - We report on the development and testing of 70 MPa hydrogen pressure vessels with integrated fibre optic sensors for automotive use. The research results were achieved in the framework of the European project SH2APED. T2 - Stakeholders' Workshop SH2APED CY - Brussels, Belgium DA - 26.09.2024 KW - Composite pressure vessel KW - Fibre optic sensor KW - Distributed strain sensing KW - Structural health monitoring KW - Fibre-reinforced plastics PY - 2024 AN - OPUS4-61211 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Ortsverteilte faseroptische Sensorik zur Zustandsüberwachung von H2-Druckbehältern für den Automobileinsatz N2 - Ergebnisse der Forschungsarbeit zur Zustandsüberwachung von Druckbehältern des Typs IV unter Verwendung ortsverteilter faseroptischer Sensoren. Die Sensorfasern werden in die Kompositstruktur integriert, indem sie während des Herstellungsprozesses der Druckbehälter in die Kreuz- und die Umfangslage um den Kunststoff-Liner gewickelt werden. Der anschließende Einsatz der optischen Rückstreureflektometrie (OBR) ermöglicht eine präzise Detektion und Lokalisierung von Strukturschäden während der gesamten Lebensdauer. Die vorgestellte Arbeit steht im Kontext des europäischen Horizon 2020-Forschungsprojekts SH2APED, das sich mit der Entwicklung eines innovativen Wasserstoffspeichersystems für den Automobileinsatz befasste. T2 - DGZfP-Jahrestagung CY - Berlin, Germany DA - 26.05.2025 KW - Ortsverteilter faseroptischer Sensor KW - Optische Rückstreureflektometrie KW - Berstprüfung KW - Lastwechselprüfung KW - Druckbehälter PY - 2025 AN - OPUS4-63269 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander A1 - Schukar, Marcus A1 - Woody, Paul A1 - Wang, Bin A1 - Breithaupt, Mathias A1 - Kriegsmann, Andreas T1 - Distributed fiber optic strain sensing for structural health monitoring of 70 MPa hydrogen vessels N2 - We report on the development and testing of 70 MPa hydrogen pressure vessels with integrated fiber optic sensing fibers for automotive use. The paper deals with the condition monitoring of such composite pressure vessels (CPVs) using the optical backscatter reflectometry (OBR) applied for a distributed fiber optic strain sensing along fully integrated polyimide-coated single-mode glass optical fiber (SM-GOF). The sensing fibers were embedded into the vessel structure by wrapping them over the polymer liner during the manufacturing process of the carbon fiber reinforced polymer (CFRP). Detecting local strain events by the integrated fiber optic sensors can be an opportunity for monitoring the material degradation of CPVs under static and cyclic loading. T2 - 11th European Workshop on Structural Health Monitoring CY - Potsdam, Germany DA - 10.06.2024 KW - Fiber optic sensor KW - Distributed strain sensing KW - Composite pressure vessel KW - Structural health monitoring KW - Fiber-reinforced plastics PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-603105 SP - 1 EP - 8 PB - NDT.net AN - OPUS4-60310 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina A1 - Lenke, Philipp A1 - Liehr, Sascha A1 - Nöther, Nils A1 - Schukar, Marcus A1 - Wendt, Mario A1 - Witt, Jens A1 - Wosniok, Aleksander T1 - Technology and applications of smart technical textiles based on fibre optic sensors N2 - Technical textiles with embedded fibre optic sensors habe been developed for the purposes of the structural health monitoring in geotechnical and civil engineering as well as for healthcare monitoring in the medical sector. The paper shows selected examples of using such sensor-based smart textiles for different applications. T2 - International conference "Optical sensors" CY - Karlsruhe, Germany DA - 2010-06-21 PY - 2010 IS - STuC2.pdf SP - 1 EP - 2(?) AN - OPUS4-21567 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Zustandsüberwachung mittels verteilter faseroptischer Sensorik: Technologien, Anwendungen und Potenziale N2 - Der Vortrag beleuchtete den aktuellen Stand und die Zukunftsperspektiven verteilter faseroptischer Sensorsysteme (Distributed Fiber Optic Sensing, DFOS) zur Zustandsüberwachung von Bauwerken, Anlagen und Infrastrukturen. Vorgestellt wurden die zugrunde liegenden Messprinzipien – insbesondere die Nutzung von Streuprozessen (Rayleigh-, Brillouin- und Raman-Streuung) – zur kontinuierlichen Erfassung von Temperatur-, Dehnungs- und Vibrationsprofilen entlang einer Glasfaser. Anhand ausgewählter Anwendungsbeispiele aus den Bereichen Energie- und zivile Infrastruktur wurde gezeigt, wie DFOS-Systeme strukturelle Veränderungen frühzeitig detektieren können. Abschließend wurden die technologischen Entwicklungen, Herausforderungen sowie die Potenziale für zukünftige Monitoring-Lösungen diskutiert. T2 - Fachausschuss Zustandsüberwachung 39. Sitzung CY - Online-Meeting DA - 28.10.2025 KW - DFOS KW - SHM KW - Verteilte faseroptische Sensorik KW - Verteilte akustische Sensorik KW - Brückenmonitoring PY - 2025 AN - OPUS4-64510 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wosniok, Aleksander A1 - Krebber, Katerina T1 - Smart Geosynthetics Based on Distributed Fiber Optic Sensors in Geotechnical Engineering N2 - Smart geosynthetics with embedded optical fibers as distributed sensors provide solutions both for applications in geotechnical engineering and for cost-effective monitoring of critical infrastructures. The incorporation of glass or polymer optical fibers (GOFs or POFs) in geotextiles and geogrids allows early detection of mechanical deformations, temperature and humidity. This paper presents selected examples of smart geosynthetics based on Brillouin and Rayleigh scattering effects in incorporated fiber optic sensors for monitoring of large geotechnical structures like dikes, dams, railways, embankments or slopes. The focus of the presented work is on real field tests of measurement capability with respect to the chosen measurement principle and used fiber type. KW - Polymer optical fiber (POF) KW - Smart geosynthetics KW - Fiber optic sensor KW - Distributed sensing KW - Glass optical fiber (GOF) PY - 2019 SN - 0046-5828 SP - 91 EP - 95 PB - Southeast Asian Geotechnical Society CY - Bangkok AN - OPUS4-48068 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wosniok, Aleksander T1 - Distributed fiber optic sensing for structural health monitoring of pipelines and structures in oil and gas industry N2 - Introduction of the state-of-the-art measurement technologies for distributed fiber optic sensing used for structural health monitoring of pipelines and structures in oil and gas industry. T2 - Workshop mit Federal University of Rio de Janeiro und Vallourec Group Brasil CY - Berlin, Germany DA - 20.05.2019 KW - Pipeline monitoring KW - Distributed Brillouin sensing KW - Fiber optic sensor PY - 2019 AN - OPUS4-48048 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -