TY - GEN
A1 - Adam, Christian
A1 - Brenneis, Rudolf
A1 - Simon, Franz-Georg
ED - Martin Faulstich,
ED - Peter Quicker,
T1 - Ascheentsorgung - Acker oder Deponie?
T2 - 4. Fachtagung "Verfahren & Werkstoffe für die Energietechnik - Biomasse & Abfall - Regionale Brennstoffe richtig nutzen"
CY - Sulzbach-Rosenberg
DA - 2008-06-11
PY - 2008
SN - 978-3-9810391-3-9
N1 - Serientitel: Verfahren & Werkstoffe für die Energietechnik – Series title: Verfahren & Werkstoffe für die Energietechnik
IS - 4
SP - 227
EP - 243
PB - DORNER PrintConcept GmbH + Co. KG
CY - Sulzbach-Rosenberg
AN - OPUS4-17609
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Adam, Christian
A1 - Brenneis, Rudolf
A1 - Adamczyk, Burkart
T1 - Möglichkeiten der thermochemischen Behandlung von Reststoffen
KW - Thermochemische Stofftrennung
KW - Wertstoffrückgewinnung
PY - 2010
DO - https://doi.org/10.1002/cite.201050012
SN - 0009-286X
SN - 1522-2640
VL - 82
IS - 9
SP - 1579
EP - 1580
PB - Wiley-VCH Verl.
CY - Weinheim
AN - OPUS4-22004
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Adam, Christian
A1 - Herzel, Hannes
A1 - Krüger, Oliver
ED - Schuhmann, R.
T1 - Technische Prozesse zur Phosphorrückgewinnung aus Klärschlammaschen
N2 - Klärschlammaschen weisen hohe Gehalte an Phosphor auf, dieser ist allerdings schlecht für Pflanzen verfügbar. Des Weiteren enthalten sie Schwermetalle die vor dem Einsatz als Düngemittel entfernt werden müssen. Vor diesem Hintergrund wurden in den letzten Jahren nasschemische und thermochemische Verfahren entwickelt und zum Teil bereits in Demonstrationsanlagen getestet. Ein thermochemischer Verfahrensansatz wird in diesem Beitrag näher vorgestellt. Klärschlammaschen werden mit Klärschlamm als Reduktionsmittel und Natriumsulfat als Aufschlussmittel im Drehrohrofen thermisch behandelt. Bei diesem Prozess wird pflanzenverfügbares NaCaPÜ4 gebildet, unerwünschte Elemente wie As, Cd, Hg und Pb werden zum Teil über die Gasphase separiert. Die Ergebnisse eines Demonstrationsversuchs werden vorgestellt.
N2 - Sewage sludge ashes exhibit high phosphorus mass fractions. However, the availability of phosphorus to plants is poor. Furthermore, sewage sludge ashes contain eco-toxicologically relevant heavy metals that have to be removed prior to agricultural application. ln front of this background several wet-chemical and thermo-chemical processes were developed in the last years and some of them were already successfully demonstrated in large scale. A thermo-chemical approach is presented in this article. Sewage sludge ashes are mixed with dry sewage sludge as reductant and sodium sulfate. Düring thermal treatment in a rotary kiln at approx. 950°C plant available NaCaPCU is formed. Furthermore undesired elements such as As, Cd, Hg and Pb are separated via the gas phase. Results of demonstration trials are presented.
T2 - 8. CMM-Tagung 2015 - Innovative Feuchtemessung in Forschung und Praxis - Material - Prozesse - Systeme
CY - Karlsruhe, Germany
DA - 07.10.2015
KW - Klärschlammasche
KW - Phoshorrückgewinnung
PY - 2015
N1 - Serientitel: Innovative Feuchtemessung in Forschung und Praxis – Series title: Innovative Feuchtemessung in Forschung und Praxis
SP - 251
EP - 262
AN - OPUS4-34859
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Weimann, Karin
A1 - Adam, Christian
A1 - Schulz, T.
A1 - Linsz, E.
T1 - Environmental evaluation of different ways to produce recycled concrete aggregates
N2 - Due to the great quantities of construction and demolition waste in Europe, the reuse of building material waste as secondary raw materials is of particular importance. A recycling of building materials can meet the requirements of sustainability in several aspects: the extended time availability of primary raw materials and the related protection of natural resources as well as the saving of landfill sites. In recent years sulphates originating from gypsum in secondary building materials, made of construction and demolition waste, received growing attention. Sulphates are unwanted in secondary building materials for concrete production as well as for other use e.g. in unbounded layers. The content of gypsum resp. sulphates in secondary aggregates can be reduced by different methods. Depending on the type of material different steps for selective dismantling can be used to separate gypsum containing residues from concrete rubble. Furthermore some steps for the processing of building rubble are suitable for the reduction of sulphates in the produced aggregates. An environmental evaluation of different ways for the production of recycled concrete aggregates was performed with regard to a reduction of sulphates in the secondary building material. The use of techniques for selective dismantling was environmentally advantegous for the deconstruction of three investigated model houses.
T2 - SUM2014 - 2nd Symposium on urban mining
CY - Bergamo, Italy
DA - 19.05.2014
KW - Recycling
KW - Concrete aggregates
KW - Building waste
KW - Construction
PY - 2014
SN - 9788862650311
SP - Session C 6, 1
EP - 8
AN - OPUS4-30825
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Adam, Christian
T1 - Das Potential Deutscher Klärschlammaschen für die Wertstoffrückgewinnung
T2 - VDI Fachkonferenz Klärschlammbehandlung
CY - Berlin, Germany
DA - 2012-09-26
PY - 2012
AN - OPUS4-26589
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Adam, Christian
A1 - Brenneis, Rudolf
A1 - Adamczyk, Burkart
A1 - Simon, Franz-Georg
T1 - Recycling of waste materials by thermochemical treatment
T2 - ISWA World congress 2010 - Urban development and sustainbility - a major challenge for waste management in the 21st century
CY - Hamburg, Germany
DA - 2010-11-15
KW - thermochemical substance separation
KW - Thermodynamics
KW - Thermochemistry
PY - 2010
SP - 1
EP - 10(?)
AN - OPUS4-22467
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Weimann, Karin
A1 - Adam, Christian
T1 - Ökobilanzielle Bewertungen von Abbruch- und Aufbereitungsverfahren als Grundlage für ein optimiertes Bauschuttrecycling
N2 - Prinzipien der Nachhaltigkeit spielen sowohl in Deutschland als auch weltweit zunehmend eine wichtige Rolle. Neben dem Bestreben nach einer Reduzierung des Energieverbrauchs gehört in diesem Zusammenhang auch die Weiterverwendung bzw, Verwertung von Reststoffen und Abfallen zu den wichtigsten Themenbereichen. Baurestmassen sind dabei aufgrund der großen Massenströme von besonderer Bedeutung.
T2 - 18. Ibausil - Internationale Baustofftagung
CY - Weimar, Germany
DA - 12.09.2012
KW - Bauschuttaufbereitung
KW - Abbruch
KW - Ökobilanzielle Bewertung
KW - RC-Beton
KW - Gips
PY - 2012
SN - 978-3-00-034075-8
VL - 2
IS - 3.07
SP - 2-1042
EP - 2-1049
AN - OPUS4-26606
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Adam, Christian
T1 - Eine nachhaltige Strategie zur Nutzung des Phosphors im Klärschlamm - Ergebnisse aus dem EU-Projekt SUSAN
T2 - Internationales Klärschlamm-Symposium, Wege einer verantwortungsvollen Klärschlammentsorgung
CY - Fürstenfeldbruck, Germany
DA - 2008-06-30
PY - 2008
AN - OPUS4-17695
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Gentzmann, Marie
A1 - Paul, Andrea
A1 - Serrano, Juan
A1 - Adam, Christian
T1 - Understanding scandium leaching from bauxite residues of different geological backgrounds using statistical design of experiments
N2 - The leaching behavior of scandium (Sc) from bauxite residues can differ significantly when residues of different geological backgrounds are compared. The mineralogy of the source rock and the physicochemical environment during bauxitization affect the association of Sc in the bauxite i.e., how Sc is distributed amongst different mineral phases and whether it is incorporated in and/or adsorbed onto those phases. The Sc association in the bauxite is in turn crucial for the resulting Sc association in the bauxite residue. In this study systematic leaching experiments were performed on three different bauxite residues using a statistical design of experiments approach. The three bauxite residues compared originated from processing of lateritic and karstic bauxites from
Germany, Hungary, and Russia. The recovery of Sc and Fe was determined by ICP-OES measurements. Mineralogical changes were analyzed by X-ray-diffraction and subsequent Rietveld refinement. The effects of various parameters including temperature, acid type, acid concentration, liquid-to-solid ratio and residence time were studied. A response surface model was calculated for the selected case of citric acid leaching of Hungarian bauxite residue. The investigations showed that the type of bauxite residue has a strong influence. The easily leachable fraction of Sc can vary considerably between the types, reaching ~20–25% in German Bauxite residue and ~50% in Russian bauxite residue. Mineralogical investigations revealed that a major part of this fraction was released from secondary phases such as cancrinite and katoite formed during Bayer processing of the bauxite.
The effect of temperature on Sc and Fe recovery is strong especially when citric acid is used. Based on the exponential relationship between temperature and Fe-recovery it was found to be particularly important for the selectivity of Sc over Fe. Optimization of the model for a maximum Sc recovery combined with a minimum Fe
recovery yielded results of ~28% Sc recovery at <2% Fe recovery at a temperature of 60 ◦C, a citric acid normality of 1.8, and a liquid-to-solid ratio of 16 ml/g. Our study has shown that detailed knowledge about the Sc association and distribution in bauxite and bauxite residue is key to an efficient and selective leaching of Sc
from bauxite residues.
KW - Bauxite residue
KW - Scandium
KW - Leaching
KW - Design of experiments
KW - Red mud
PY - 2022
DO - https://doi.org/10.1016/j.gexplo.2022.107041
SN - 0375-6742
VL - 2022
IS - 240
SP - 1
EP - 13
PB - Elsevier Science
CY - Amsterdam
AN - OPUS4-55531
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Adam, Christian
A1 - Schraut, Katharina
A1 - Adamczyk, Burkart
A1 - Weimann, Karin
A1 - Gluth, Gregor
T1 - Erzeugung klimaschonender Bindemittel als Alternativen zu Zement durch thermochemische Behandlung von mineralischen Nebenprodukten und Abfällen
N2 - Die Zementindustrie erzeugt etwa 6-7% der globalen CO2-Emissionen und steht damit als Industriezweig vor dem Hintergrund einer anvisierten Klimaneutralität vor gewaltigen Herausforderungen. Der Prozess der Klinkerherstellung wurde über die vergangenen Jahrzehnte bereits kontinuierlich optimiert. Seit 1990 ist es der deutschen Zementindustrie gelungen, die spezifischen CO2-Emissionen der Zementproduktion u. a. durch den Einsatz alternativer, nicht fossiler Brennstoffe und durch Absenkung des Klinkergehalts im Zement um 20 % zu senken. Weitere konventionelle Minderungsstrategien versprechen jedoch nur noch wenig zusätzliche Reduktion. Im Falle des Portlandklinkers besteht die Schwierigkeit darin, dass zwei Drittel der CO2-Emissionen rohstoffbedingt durch die Entsäuerung des Kalksteins (CaCO3) anfallen, die durch die beschriebenen Maßnahmen nicht weiter abgesenkt werden können. Vielmehr wird es erforderlich sein, noch zu entwickelnde oder zu optimierende Technologien anzuwenden und ggf. alle relevanten Ebenen wie Produktion, Weiterverarbeitung und Anwendung von Zement und Beton neu zu denken. Neben technologischen Ansätzen zur CO2-Abscheidung mit nachfolgender langfristiger Speicherung (Carbon Capture and Storage – CCS) oder Verwertung (Carbon Capture and Utilisation – CCU) werden auch alternative Rohstoffe für die Zementproduktion und alternative Bindemittel in Betracht zu ziehen sein.
T2 - Berliner Konferenz Mineralische Nebenprodukte und Abfälle
CY - Berlin, Germany
DA - 25.04.2022
KW - Zement
KW - Sekundärrohstoff
PY - 2022
SN - 978-3-944310-58-9
SP - 372
EP - 385
PB - TK-Verlag
CY - Neuruppin
AN - OPUS4-54737
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Smol, M.
A1 - Adam, Christian
A1 - Kugler, Stefan
T1 - Thermochemical Treatment of Sewage Sludge Ash (SSA)—Potential and Perspective in Poland
N2 - Phosphorus (P) recovery from sewage sludge ash (SSA) is one of the most promising approaches of phosphate rock substitution in mineral fertilizers and might be a sustainable way to secure supply of this raw material in the future. In the current investigation, the process of thermochemical treatment of SSA was applied to SSA coming from selected mono-incineration plants of municipal sewage sludge in Poland (Cracow, Gdansk, Gdynia, Lodz, Kielce and Szczecin).
The Polish SSA was thermochemically converted in the presence of sodium (Na) additives and a reducing agent (dried sewage sludge) to obtain secondary raw materials for the production of marketable P fertilizers. The process had a positive impact on the bioavailability of phosphorus and reduced the content of heavy metals in the obtained products. The P solubility in neutral Ammonium citrate, an indicator of its bioavailability, was significantly raised from 19.7–45.7% in the raw ashes and 76.5–100% in the thermochemically treated SSA. The content of nutrients in the recyclates was in the range of 15.7–19.2% P2O5, 10.8–14.2% CaO, 3.5–5.4% Na2O, 2.6–3.6% MgO and 0.9–1.3% K2O. The produced fertilizer raw materials meet the Polish norms for trace elements covered by the legislation: the content of lead was in the range 10.2–73.1 mg/kg, arsenic 4.8–22.7 mg/kg, Cadmium 0.9–2.8 mg/kg and mercury <0.05 mg/kg. Thus, these products could be potentially directly used for fertilizer production. This work also includes an analysis of the possibilities of using ashes for fertilizer purposes in Poland, based on the assumptions indicated in the adopted strategic and planning documents regarding waste management and fertilizer production.
KW - Sewage Sludge Ashes
KW - Critical raw materials
KW - Phosphorus
KW - Fertilizer
KW - Sewage Sludge
PY - 2020
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-514468
DO - https://doi.org/10.3390/en13205461
VL - 13
IS - 20
SP - 5461
AN - OPUS4-51446
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Herzel, Hannes
A1 - Stemann, J.
A1 - Simon, Sebastian
A1 - Adam, Christian
T1 - Comparison of thermochemical treatment of sewage sludge ash with sodium sulphate in laboratory-scale and pilot-scale experiments
N2 - There is an ongoing debate on European scale concerning the criticality of phosphorus. In Switzerland and Germany, phosphorus recovery from phosphorus-rich waste streams will become obligatory. Sewage sludge ash is rich in phosphorus and may become an important secondary feedstock. Thermochemical treatment of sewage sludge ash with sodium sulphate under reducing conditions was shown to remove heavy metals from the solid product and produce the fully plant available crystalline phase CaNaPO4. Pilot-scale experiments in a rotary kiln were carried out at temperatures between 750 and 1000 °C and were compared to laboratory-scale experiments with crucibles. Process upscaling was successfully demonstrated but a series of differences were noticed: In comparison to laboratory-scale, solubility of phosphorus in samples from pilot-scale experiments was lower at all chosen treatment temperatures because of shorter retention time and incomplete decomposition of sodium sulphate. X-ray diffraction analysis revealed remaining phase fractions of whitlockite (Ca3-x(Mg,Fe)x(PO4)2) and sodium sulphate from the starting materials in products and thus indicated incomplete reaction. In contrast to the results of laboratory-scale experiments, the crystalline phase CaNaPO4 was clearly absent in the products from the rotary kiln but instead a Mg-bearing phase (Ca,Mg)NaPO4 was formed. Laboratory-scale experiments confirmed (Ca,Mg)NaPO4 is an intermediate phase between whitlockite and CaNaPO4. However, both crystalline phases are characterized by high plant availability. It was shown that heavy metal removal increased at higher temperatures whereas solubility and thus plant availability of phosphorus already reached its maxima at temperatures of 950 °C in pilot-scale and 875 °C in laboratory-scale experiments.
KW - Crystalline phase identification
KW - Heavy metal removal
KW - Phosphorus availability
KW - Process upscaling
KW - Recovery
KW - Rhenanite
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-524084
DO - https://doi.org/10.1007/s13762-021-03252-y
VL - 19
IS - 3
SP - 1997
EP - 2006
PB - Springer
AN - OPUS4-52408
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Weimann, Karin
A1 - Adam, Christian
A1 - Buchert, M.
A1 - Sutter, J.
T1 - Environmental Evaluation of Gypsum Plasterboard Recycling
N2 - Gypsum is widely used in the construction sector and its worldwide consumption has been increasing for several decades. Depending on the life-time of the used gypsum products, an increase of gypsum in construction and demolition waste follows. Especially against the background of a circular economy, the recycling of waste gypsum is of growing importance. However, the use of recycled gypsum makes only sense if it is environmentally friendly. Therefore, an evaluation of the environmental impacts of an industrial-scale processing for the recycling of post-consumer gypsum waste was conducted. The evaluation was performed with an established life cycle assessment software. Original data provided by industry and complementary data from a database for life cycle assessments were used for the calculations. Two scenarios for recycled gypsum with different transportation distances were calculated. These results are compared with results of the environmental evaluation of gypsum derived from coal-fired power plants (FGD gypsum) and natural gypsum. The results show that utilization of recycled gypsum can be environmentally advantageous compared to the use of natural gypsum or FGD gypsum, especially in the impact categories land transformation and resource consumption (abiotic depletion potential). For most environmental impact categories the specific transportation distances have a strong influence.
KW - Gypsum plasterboards
KW - Gypsum waste
KW - Recycled gypsum
KW - Environmental evaluation
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-522321
DO - https://doi.org/10.3390/min11020101
SN - 2075-163X
VL - 11
IS - 2
SP - 101
PB - MDPI
CY - Basel, Schweiz
AN - OPUS4-52232
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Herzel, Hannes
A1 - Aydin, Zeynep
A1 - Adam, Christian
T1 - Crystalline phase analysis and phosphorus availability after thermochemical treatment of sewage sludge ash with sodium and potassium sulfates for fertilizer production
N2 - Phosphorus rich sewage sludge ash is a promising source to produce phosphorus recycling fertilizer. However, the low plant availability of phosphorus in these ashes makes a treatment necessary. A thermochemical treatment (800–1000 °C) with alkali additives transforms poorly plant available phosphorus phases to highly plant available calcium alkali Phosphates (Ca,Mg)(Na,K)PO4. In this study, we investigate the use of K2SO4 as additive to produce a phosphorus potassium fertilizer in laboratory-scale experiments (crucible). Pure K2SO4 is not suitable as high reaction temperatures are required due to the high melting point of K2SO4.
To overcome this barrier, we carried out series of experiments with mixtures of K2SO4 and Na2SO4 resulting in a lower economically feasible reaction temperature (900–1000 °C). In this way, the produced phosphorus potassium fertilizers (8.4 wt.% K, 7.6 wt.% P) was highly plant available for phosphorus indicated by complete extractable phosphorus in neutral ammonium citrate solution. The added potassium is, in contrast to sodium, preferably incorporated into silicates instead of phosphorus phases. Thus, the highly extractable phase (Ca,Mg)(Na,K)PO4 in the thermochemical products contain less potassium than expected. This preferred incorporation is confirmed by a pilot-scale trial (rotary kiln) and thermodynamic calculation.
KW - Phosphorus recovery
KW - Recycling fertilizer
KW - Calcium alkali phosphate
KW - Silicate
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-536276
DO - https://doi.org/10.1007/s10163-021-01288-3
SN - 1611-8227
IS - 23
SP - 2242
EP - 2254
PB - Springer
AN - OPUS4-53627
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Raniro, H.R.
A1 - Soares, T.de M.
A1 - Adam, Christian
A1 - Pavinato, P.S.
T1 - Waste-derived fertilizers can increase phosphorus uptake by sugarcane and availability in a tropical soil
N2 - The use of highly water-soluble phosphorus (P) fertilizers can lead to P fixation in the soil, reducing fertilization efficiency. Waste-derived, low water-solubility sources can potentially increase sugarcane’s P uptake compared to triple superphosphate by reducing adsorption to the soil.
Aims:We aimed to test struvite, hazenite, and AshDec® for their agronomic potential as recycled fertilizers for sugarcane production in a typical tropical soil.We hypothesize that these sources can reduce P fixation in the soil, increasing its availability and sugarcane’s absorption.
Methods: In a greenhouse pot experiment, two consecutive sugarcane cycles, 90 days each, were conducted in a Ferralsol. The recovered sources struvite, hazenite, AshDec®, and the conventional triple superphosphate were mixed in the soil in three P doses (30, 60, and 90 mg kg–1), aside a control (nil-P). At both harvests, sugarcane number of sprouts, plant height, stem diameter, dry mass yield, shoot phosphorus, and soil P fractionation were investigated.
Results: At 90 days, struvite and hazenite performed better for dry mass yield (70.7 and 68.3 g pot–1, respectively) than AshDec® and triple superphosphate (59.8 and 57.4 g pot–1, respectively) and for shoot P, with 98.1, 91.6, 75.6, and 66.3 mg pot–1, respectively. At 180 days, struvite outperformed all treatments for dry mass yield (95.3 g pot–1) and AshDec® (75.5 mg pot–1) for shoot P. Struvite was 38% and hazenite 21% more efficient than triple superphosphate in P uptake, while AshDec® was 6% less efficient. Soil had higher labile P under struvite, hazenite, and AshDec® than triple superphosphate by the end of the first cycle, while only the later increased nonlabile P by the end of the experiment (180 days).
Conclusions:Waste-derived P sources were more efficient in supplying P for sugarcane and delivering labile P in 180 days than triple superphosphate.
KW - AshDec
KW - Hazenite
KW - P-efficiency
KW - Recycled sources
KW - Struvite
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-544216
DO - https://doi.org/10.1002/jpln.202100410
SN - 1436-8730
SP - 1
EP - 12
PB - Wiley-VCH GmbH
AN - OPUS4-54421
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Schraut, Katharina
A1 - Kargl, F.
A1 - Adam, Christian
A1 - Ivashko, O.
T1 - In situ synchrotron XRD measurements during solidification of a melt in the CaO–SiO2 system using an aerodynamic levitation system
N2 - Phase formation and evolution was investigated in the CaO–SiO2 system in the range of 70–80 mol% CaO. The samples were container-less processed in an aerodynamic levitation system and crystallization was followed in situ by synchrotron x-ray diffraction at the beamline P21.1 at the German electron synchrotron (DESY). Modification changes of di- and tricalcium silicate were observed and occurred at lower temperatures than under equilibrium conditions. Despite deep sample undercooling, no metastable phase formation was observed within the measurement timescale of 1 s. For the given cooling rates ranging from 300 K s−1 to about 1 K s−1, no decomposition of tricalcium silicate was observed. No differences in phase evolution were observed between reducing and oxidizing conditions imposed by the levitation gas (Ar and Ar + O2). We demonstrate that this setup has great potential to follow crystallization in refractory oxide liquids in situ. For sub-second primary phase formation faster detection and for polymorph detection adjustments in resolution have to be implemented.
KW - Aerodynamic levitation
KW - Calcium silicate
KW - Phase formation
KW - Oxide melts
KW - In situ synchrotron x-ray diffraction
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-526952
DO - https://doi.org/10.1088/1361-648X/abf7e1
VL - 33
IS - 26
SP - 264003 (12pp)
PB - IOP Publishing
AN - OPUS4-52695
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Sichler, Theresa Constanze
A1 - Adam, Christian
A1 - Barjenbruch, M.
A1 - Montag, D.
A1 - Mauch, Tatjana
A1 - Sommerfeld, Thomas
A1 - Ehm, J.H.
T1 - Variation of the element composition of municipal sewage sludges in the context of new regulations on phosphorus recovery in Germany
N2 - Phosphorus (P) recovery is obligatory for all sewage sludges with more than 20 g P/kg dry matter (DM) from 2029 in Germany. Nine wastewater treatment plants (WWTPs) were chosen to investigate variations of phosphorus contents and other parameters in sewage sludge over the year. Monthly sewage sludge samples from each WWTP were analyzed for phosphorus and other matrix elements (C, N, H, Ca, Fe, Al, etc.), for several trace elements (As, Cr, Mo, Ni, Pb, Sn) and loss of ignition. Among the nine WWTPs, there are four which have phosphorus contents both above and below the recovery limit of 20 g/kg DM along the year. Considering the average phosphorus content over the year, only one of them is below the limit. Compared to other matrix elements and parameters, phosphorus fuctuations are low with an average of 7% over all nine WWTPs. In total, only hydrogen and carbon are more constant in the sludge.
In several WWTPs with chemical phosphorus elimination, phosphorus fuctuations showed similar courses like iron and/or aluminum. WWTPs with chamber flter presses rather showed dilution efects of calcium dosage. As result of this study, monthly phosphorus measurement is highly recommended to determine whether a WWTP is below the
20 g/kg DM limit.
KW - Sewage sludge
KW - Phosphorus recovery
KW - Wastewater
KW - Phosphorus elimination
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-557499
DO - https://doi.org/10.1186/s12302-022-00658-4
SN - 2190-4707
VL - 34
IS - 1
SP - 1
EP - 12
PB - Springer Nature
CY - Berlin
AN - OPUS4-55749
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Sichler, Theresa Constanze
A1 - Adam, Christian
A1 - Becker, Roland
A1 - Sauer, Andreas
A1 - Ostermann, Markus
A1 - Barjenbruch, M.
T1 - Phosphorus determination in sewage sludge: comparison of different aqua regia digestion methods and ICP-OES, ICP-MS and photometric determination
N2 - Phosphorus recycling from sewage sludge will be obligatory in Germany from 2029. Phosphorus content determination in sewage sludge is crucial to assess the prescribed recycling rates. Currently, German law regards sample preparation using aqua regia digestion in a microwave or under reflux conditions as well as instrumental phosphorus determination by ICP-OES, ICP-MS, or photometric determination with ammonium molybdate as equivalent. However, it is questionable whether these methods are indeed equivalent regarding phosphorus quantification in sludges near the limit of 20 g/kg for mandatory recycling. To answer this question, 15 sewage sludges of 11 different wastewater treatment plants were investigated with all permitted method (digestion and measurement) combinations. Moreover, one sewage sludge was also examined in an interlaboratory comparison (ILC) with 28 participants. This study shows that the above-mentioned methods differ in some cases significantly but across all method combinations and sludges, phosphorus recovery was between 80 and 121% after normalization to the grand mean (average of 15 sludges between 85 and 111%). The ILC and the examination of 15 sludges produced largely similar results. There is a tendency to higher phosphorus recovery after microwave digestion compared to reflux digestion and ICP-OES measurements determine higher phosphorus contents than ICP-MS and photometric phosphorus determination. As a result, the authors recommend ICP-OES determination of phosphorus in sewage sludge after microwave digestion.
KW - Sewage sludge
KW - ICP-OES
KW - Phosphous recovery
KW - ICP-MS
KW - Photometric P determination
KW - Interlaboratory comparison
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-558869
DO - https://doi.org/10.1186/s12302-022-00677-1
VL - 34
IS - 99
SP - 1
EP - 14
PB - Springer
AN - OPUS4-55886
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Dombinov, V.
A1 - Herzel, Hannes
A1 - Meiller, M.
A1 - Müller, F.
A1 - Willbold, S.
A1 - Zang, J. W.
A1 - da Fonseca-Zang, W. A.
A1 - Adam, Christian
A1 - Klose, H.
A1 - Poorter, H.
A1 - Jablonowski, N. D.
A1 - Schrey, S. D.
T1 - Sugarcane bagasse ash as fertilizer for soybeans: Effects of added residues on ash composition, mineralogy, phosphorus extractability and plant availability
N2 - Sugarcane bagasse is commonly combusted to generate energy. Unfortunately, recycling strategies rarely consider the resulting ash as a potential fertilizer. To evaluate this recycling strategy for a sustainable circular economy, we characterized bagasse ash as a fertilizer and measured the effects of co-gasification and co-combustion of bagasse with either chicken manure or sewage sludge: on the phosphorus (P) mass fraction, P-extractability, and mineral P phases. Furthermore, we investigated the ashes as fertilizer for soybeans under greenhouse conditions. All methods in combination are reliable indicators helping to assess and predict P availability from ashes to soybeans. The fertilizer efficiency of pure bagasse ash increased with the ash amount supplied to the substrate. Nevertheless, it was not as effective as fertilization with triple-superphosphate and K2SO4, which we attributed to lower P availability. Co-gasification and co-combustion increased the P mass fraction in all bagasse-based ashes, but its extractability and availability to soybeans increased only when co-processed with chicken manure, because it enabled the formation of readily available Ca-alkali phosphates. Therefore, we recommend co-combusting biomass with alkali-rich residues to increase the availability of P from the ash to plants.
KW - Combustion and gasification
KW - Phosphate extractability and availability
KW - X-ray diffraction (XRD)
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-567632
DO - https://doi.org/10.3389/fpls.2022.1041924
SN - 1664-462X
VL - 13
SP - 1
EP - 13
PB - Frontiers Media
CY - Lausanne
AN - OPUS4-56763
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Sichler, Theresa
A1 - Adam, Christian
A1 - Montag, D.
A1 - Ehm, J.
A1 - Barjenbruch, M.
A1 - Pinnekamp, J.
ED - Holm, O.
ED - Thomé-Kozmiensky, E.
ED - Quicker, P.
ED - Kopp-Assenmacher, S.
T1 - Auswirkungen der novellierten AbfKlärV auf die Kreislaufführung von Pflanzennährstoffen
N2 - Because of the longstanding oversupply of nutrients in Germany, waste and fertilization legislation has been amended in 2017. As the new laws do still not meet the European nitrate ordinance, fertilization laws must be tightened again. In consequence, there is a rising competition for land between sewage sludge and organic fertilizers.
Furthermore, the new sewage sludge ordinance (AbfKlärV) contains stricter thresholds and a ban on agricultural sewage sludge utilization for WWTPs > 50,000 p.e. from 2029. WWTPs which do not use their sludge for agriculture have to recover phosphorus from then on. However, sludges with less than 2% P content are not affected by that obligation. Every federal state of Germany must report amounts and quality of agricultural utilized sewage sludge yearly. An evaluation of raw data from 10 federal states shows that nearly 40% of both WWTPs and sewage sludge volume fall below the recovery limit of 2%. On the other hand, this means less than 30% of the P potential. In addition, there is no information whether the sludges fall reliably below the limit as required by the ordinance. This project aims to investigate this reliability by regarding the variations in the P content of sewage sludge. For this reason, samples will be taken monthly at 10 representative WWTPs over a year. Whereas phosphorus will still mostly be subject of recovery other nutrients are not affected by this. As a result, large amounts of N, K, Mg and Ca will be increasingly removed from the cycle. In 2017, WWTPs > 50,000 p.e. accounted for 30-60% of the nutrient potentials. These potentials will probably get lost to a large extent due to the fertilization ban. Many small WWTPs are also currently changing their utilization strategy from agriculture to incineration to ensure a safe disposal in future. Therefore, we can expect that even larger amounts of nutrients apart from phosphorus will be discharged from the circular economy. In comparison to the domestic sales volume of mineral fertilizers these other nutrients do only account for a very small fraction. A recovery could nevertheless replace parts of the mineral fertilizers, thus reducing environmental impacts. Energy consumption for technical nitrogen fixation is high and nutrient cycles are strongly anthropogenic influenced with diverse consequences such as eutrophication, acidification and endangered groundwater resources. Sewage sludge contains several micronutrients next to the macronutrients P, N, K, Mg, Ca and S. Because of lacking information on the actual German need for micronutrients contents and freights cannot evaluated. Moreover, former sewage sludge fertilization was probably not needs-based. It is therefore not possible to estimate a true loss in micronutrients due to the amended sewage sludge ordinance.
N2 - Die landwirtschaftliche Klärschlammverwertung ist in der Bundesrepublik Deutschland seit Jahren rückläufig, hatte im Jahr 2017 jedoch noch einen Anteil von rund 18 % [20]. Diese Art der Verwertung wird kontrovers diskutiert, da der Klärschlamm im Rahmen der Abwasserreinigung eine Schadstoffsenke darstellt. In vergangenen Jahrzehnten wurden insbesondere die hohen Gehalte an Schwermetallen im Klärschlamm als kritisch für eine landwirtschaftliche Verwertung eingestuft. Diese Belastung konnte allerdings durch Absenkung der Einträge von Schmermetallen in das Abwasser signifikant gesenkt werden. Neben Schwermetallen kamen jedoch auch organische Schadstoffe wie Pharmazeutika, Kosmetika und Haushaltschemikalien in den Fokus der Diskussion über den Einsatz von Klärschlamm auf Agrarflächen. Heute geraten zunehmend weitere Inhaltsstoffe in den Fokus, deren Auswirkungen noch nicht abschließend geklärt sind, weshalb eine einheitliche Bewertung über Grenzwerte nicht darstellbar ist. Beispiele für diese neuen Stoffgruppen sind Mikroplastik, Nanopartikel, Antibiotikaresistenzen und persistente organische Spurenstoffe. Neben den angesprochenen Risiken gibt es in Deutschland Regionen mit einem stark erhöhten Nährstoffüberschuss. In der Kritik steht vor allem eine nicht ordnungsgemäße Düngung mit Stickstoff, welche mit Nitratauswaschungen in das Grundwasser einhergeht. Um diese Grundwasserbelastung zu verhindern wurde u.a. das Düngerecht erneut verschärft, was die Flächenkonkurrenz zwischen Klärschlamm und Wirtschaftsdünger weiter vergrößern wird. Auf Druck der EU-Kommission stehen zudem weitere Anpassungen im Düngerecht bevor, da die beschlossenen Änderungen aus Kommissionssicht nicht ausreichen, um die Nitratrichtlinie einzuhalten. Vor dem Hintergrund der angeführten Probleme wurde im Koalitionsvertrag der 18. Legislaturperiode (2013) festgeschrieben, „die Klärschlammausbringung zu Düngezwecken [zu] beenden und Phosphor und andere Nährstoffe zurück[zu]gewinnen“ [5]. Die novellierte AbfKlärV beinhaltet allerdings kein grundsätzliches Aufbringungsverbot und eine Rückgewinnungspflicht besteht lediglich für den Nährstoff Phosphor. Es ist davon auszugehen, dass sich die neuen Regelungen im Düngerecht und der Klärschlammverordnung massiv auf die landwirtschaftliche Verwertung von Klärschlamm und damit auf die Kreislaufwirtschaft verschiedener Nährstoffe auswirken werden. Zur Ermittlung dieser Auswirkungen wird seit Oktober 2018 im Auftrag des Umweltbundesamtes das REFOPLAN-Projekt „extraWERT“ (FKZ 3718 26 330 0) von der Bundesanstalt für Materialforschung und -prüfung (BAM) in Kooperation mit dem Institut für Siedlungswasserwirtschaft (ISA) der RWTH Aachen durchgeführt. In diesem Beitrag werden erste Ergebnisse dieses Projekts vorgestellt.
T2 - Klärschlammkonferenz
CY - Berlin, Germany
DA - 04.11.2019
KW - Klärschlammdüngung
KW - Landwirtschaft
KW - Makronährstoffe
PY - 2019
SN - 978-3-944310-49-7
VL - 2
SP - 362
EP - 374
PB - Thomé-Kozmiensky Verlag
CY - Neuruppin
AN - OPUS4-49603
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Weimann, Karin
A1 - Adam, Christian
ED - Martins, I. M.
ED - Ulsen, C.
ED - Villagran, Y.
T1 - Advantages of recycling gypsum plasterboards
N2 - Advantages of recycling gypsum plaster boards
During the last decades the material composition of buildings has become increasingly diverse. However, largely sorted material flows are needed for generating high quality secondary building materials. The use of secondary building materials can meet the requirements of sustainability in several ways: the extended time availability of primary raw materials and, thereby, the preservation of natural resources as well as the conservation of landfill sites.
Recycling of gypsum (calcium sulfate) can be a good example for the environmental benefits of closed-loop recycling. The content of sulfates in other secondary building materials, in particular in recycled concrete aggregates, should be minimized for quality reasons. In contrast, separated gypsum can also be used in gypsum production if the high quality requirements for the recycled gypsum are met. Since almost all processing steps in the recycling process are associated with environmental impacts, an environmental evaluation of the use of recycled gypsum as a substitute in gypsum production has to be carefully conducted.
This paper focusses on the techniques for generating recycled gypsum from gypsum plasterboards, the related quality requirements and a comprehensive environmental evaluation of the complete process.
T2 - IV International Conference Progress of Recycling in the Built Environment
CY - Lisbon, Portugal
DA - 11.10.2018
KW - Environmental evaluation
KW - Gypsum
KW - CDW processing
PY - 2018
SN - 978-2-35158-208-4
VL - PRO 124
SP - 243
EP - 250
PB - Rilem publications S.A.R.L.
CY - Paris
AN - OPUS4-48078
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Adam, Christian
T1 - What is in your opinion the fertiliser of the future?
N2 - Conventional fertilisers have their disadvantages as nutrient release is not synchronised with the demand of plants. Several approaches of "next generation fertilisers" are aiming at controlled nutrient release. Recycling fertilisers are often not soluble in water but fully plant available. They are suitable raw materials for the production of new types of controlled release fertilisers.
T2 - CLOOP-Workshop "What is in your opinion the fertiliser of the future?"
CY - Berlin, Germany
DA - 22.10.2019
KW - Controlled release fertilisers
KW - Recycling fertilisers
PY - 2019
AN - OPUS4-49554
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -