TY - CONF A1 - Vollpracht, A. A1 - Thiel, C. A1 - Zhao, Z. A1 - Villagrán Zaccardi, Y. A. A1 - Cordoba, G. P. A1 - Gluth, Gregor A1 - Vanoutrive, H. A1 - Gruyaert, E. A1 - Kanellopoulos, A. A1 - Mi, R. A1 - De Belie, N. T1 - Carbonation of concrete with SCMs: a data analysis by RILEM TC 281-CCC N2 - The RILEM TC 281–CCC "Carbonation of concrete with supplementary cementitious materials" is studying the effect of supplementary cementitious materials (SCMs) on natural and accelerated carbonation of blended cements. In this context a large database with carbonation depths over time has been set-up with currently 910 concrete and mortar mixes, which have been tested at different curing conditions. The collected data includes information on chemical composition and physical properties of the raw materials, on mix-design, compressive strength, curing and carbonation testing conditions. Data for a large variety of binders (with up to 94 % SCMs) and mix designs (with w/b ratios ranging from 0.26 to 0.75) were collected from the literature and unpublished material testing projects. Natural carbonation was recorded for several years in many cases, and indoor as well as outdoor results are included. However, in this contribution only lab conditions are considered. Carbonation kinetics are investigated considering the binder composition and mix design. Furthermore, the accuracy of accelerated carbonation testing is evaluated. As described in literature, the w/CaOreactive-ratio is a decisive factor for carbonation resistance but curing and exposure conditions influence the results as well. Even with identical test conditions, the scatter is very large. T2 - 16th International Congress on the Chemistry of Cement 2023 (ICCC2023) CY - Bangkok, Thailand DA - 18.09.2023 KW - Carbonation KW - Supplemetary cementitious materials KW - Blended cement KW - Concrete PY - 2023 UR - https://www.iccc-online.org/fileadmin/gruppen/iccc/proceedings/ICCC16_2023_Vol_III.pdf VL - III SP - 360 EP - 363 PB - Thailand Concrete Association AN - OPUS4-58736 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krebber, Katerina A1 - Grillet, A. A1 - Witt, Jens A1 - Schukar, Marcus A1 - Kinet, D. A1 - Thiel, T. A1 - Pirotte, F. A1 - Depré, A. T1 - Optical fibre sensors embedded into technical textile for healthcare (ofseth) T2 - 16th International Conference on Plastic Optical Fibers (POF 2007) CY - Turin, Italy DA - 2007-09-10 PY - 2007 SP - 227 EP - 233 PB - International Cooperative of Plastic Optical Fibers (ICPOF) CY - Turin, Italy AN - OPUS4-15824 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Eberstein, Markus A1 - Thiel, A. A1 - Reinsch, Stefan A1 - Müller, Ralf A1 - Deubener, J. A1 - Schiller, Wolfgang Arno T1 - Lösungs- und Kristallisationsvorgänge beim Sintern von Glasmatrix-Kompositen T2 - 79. Glastechnische Tagung CY - Würzburg, Deutschland DA - 2005-05-23 KW - Glaspulver KW - Glasmatrix-Komposit KW - Sintern KW - Kristallisation PY - 2005 SN - 3-921089-43-3 SP - 7 Seiten PB - Deutsche Glastechnische Gesellschaft CY - Offenbach AN - OPUS4-10377 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thiel, A. A1 - Eberstein, Markus A1 - Reinsch, Stefan A1 - Müller, Ralf A1 - Deubener, J. A1 - Schiller, Wolfgang Arno T1 - Viskosität in sinternden Glasmatrix-Kompositen T2 - 80. Glastechnische Tagung und 8th Int. Conference " Advances in Fusion and Processing of Glass" CY - Dresden, Germany DA - 2006-06-12 PY - 2006 AN - OPUS4-12417 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hecht, A. A1 - Thiel, R. A1 - Nabel, Eberhard A1 - Neumann, Eberhard A1 - Mundry, Eberhard T1 - Zerstörungsfreie Korngrößenbestimmung an austenitischen Feinblechen mit Hilfe der Ultraschallrückstreuung PY - 1979 SN - 0340-7551 VL - 9 IS - 3 SP - 110 EP - 111 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9178 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hecht, A. A1 - Thiel, R. A1 - Neumann, Eberhard A1 - Nabel, Eberhard A1 - Mundry, Eberhard T1 - Einsatz und Erprobung eines Meßverfahrens zur Korngrößenbestimmung an austenitischen Feinblechen mit Hilfe der Ultraschallrückstreuung PY - 1979 SN - 0025-5300 VL - 21 IS - 8 SP - 275 EP - 276 PB - Carl Hanser Verlag CY - München AN - OPUS4-9179 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Eberhard A1 - Hecht, A. A1 - Thiel, R. A1 - Nabel, Eberhard A1 - Mundry, Eberhard T1 - Determination of the grain size of austenitic sheet by ultrasonic backscattering during the rolling process T2 - 9th World Conference on Nondestructive Testing CY - Melbourne, Australia DA - 1979-11-19 PY - 1979 SP - 1 EP - 7(?) CY - Cannes AN - OPUS4-9185 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Witt, Jens A1 - Narbonneau, F. A1 - Schukar, Marcus A1 - Krebber, Katerina A1 - De Jonckheere, J. A1 - Jeanne, M. A1 - Kinet, D. A1 - Paquet, B. A1 - Depré, A. A1 - D´Angelo, L.T. A1 - Thiel, T. A1 - Logier, R. T1 - Medical textiles with embedded fiber optic sensors for monitoring of respiratory movement N2 - For patients under Magnetic Resonance Imaging (MRI) spontaneous respiration is constantly at risk of being impaired by anesthetic drugs or by upper airway obstruction. Therefore, continuous monitoring of the breathing activity is needed to assess adequate ventilation or to detect specific obstruction patterns. The paper describes three MRI compatible respiration sensors based on pure optical technologies developed within the EU FP6 project OFSETH. The sensors are based on fiber Bragg gratings, optical time-domain reflectometry and macrobending effects. The developed smart medical textiles can sense elongation up to 3% while maintaining the stretching properties of the textile substrates for patient's comfort. The OFSETH harness allows a continuous measurement of abdominal and thoracic respiration movement while all vitals organs are free for medical staff actions. The sensors were tested in MRI environment and on healthy adults. KW - Fiber optic sensor KW - Polymer optical fiber (POF) sensor KW - Respiratory sensor KW - Smart medical textile KW - MRI KW - Smart textile KW - Healthcare monitoring KW - Optical sensor KW - FBG PY - 2012 DO - https://doi.org/10.1109/JSEN.2011.2158416 SN - 1530-437X SN - 1558-1748 VL - 12 IS - 1 SP - 246 EP - 254 CY - New York, NY, USA AN - OPUS4-25649 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eberstein, Markus A1 - Müller, Ralf A1 - Reinsch, Stefan A1 - Rabe, Torsten A1 - Schiller, Wolfgang Arno A1 - Thiel, A. A1 - Deubener, J. T1 - Kinetic Modeling of LTCC-Shrinkage T2 - 3rd International Conference and Exhibition on Ceramic Interconnect and Ceramic Microsystems Technologies (CICMT 2007) CY - Denver, CO, USA DA - 2007-04-23 KW - LTCC KW - Glass matrix composites KW - Inclusions KW - Sintering kinetics KW - Modeling PY - 2007 SP - 1 EP - 8 PB - American Ceramic Soc. CY - Denver AN - OPUS4-14948 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Eberstein, Markus A1 - Müller, Ralf A1 - Reinsch, Stefan A1 - Rabe, Torsten A1 - Schiller, Wolfgang Arno A1 - Thiel, A. A1 - Deubener, J. T1 - Kinetic Modeling of LTCC Shrinkage: Effect of Alumina Content N2 - We studied sintering of LTCC-type glass matrix composites (GMCs) consisting of small glass and alumina particles of equal size. Primarily, crystals act as rigid inclusions, decelerating the densification rate. In later stages, they also dissolve, partially increasing the viscosity. Release of alumina finally induces crystallization of alumosilicates, which enables post-firing stability. To study both effects, two model GMCs were prepared: an α-Al2O3 + barium alumoborosilicate glass (BABS)–GMC, which shows neither significant dissolution nor crystallization, and an α-Al2O3 + calcium alumoborosilicate glass (CABS)–GMC, which dissolves readily and promotes crystallization. The kinetics of shrinkage for both GMC were modeled by utilizing Frenkel theory for the early stage and Mackenzie–Shuttleworth theory for the late stage, assuming that sintering is superimposed by the weighted contributions of triparticle glass–crystal clusters, their random occurrence (ideal mixing), and a shrinkage rate controlled by the GMC effective viscosity. In agreement with modeling, the experimental results showed that the shrinkage rate of BABS–GMC decreases progressively for crystal volume fractions Φ > 0.15. The attainable shrinkage is reduced by up to 8% for Φ = 0.45. For the CABS–GMC with Φ = 0.25, a reduction of Φ to 0.20 was evident due to partial α-Al2O3 dissolution. This effect was found able to increase the sintering temperature by ~50–60 K. KW - LTCC KW - Glas Matrix Composites KW - Inclusions KW - Sintering Kinetics KW - Modeling PY - 2007 SN - 1551-4897 VL - 4 IS - 4 SP - 173 EP - 180 CY - Washington, DC AN - OPUS4-16506 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -