TY - RPRT A1 - Andrzejuk, W. A1 - Bau, A. A1 - Charoud-Got, J. A1 - de Vos, P. A1 - Emteborg, H. A1 - Lamberty, A. A1 - Linsinger, T. A1 - Oostra, A. A1 - Quetel, C. A1 - Roebben, G. A1 - Tresl, I. A1 - Hearn, R. A1 - Wood, S. A1 - Pritzkow, W. A1 - Vogl, Jochen T1 - Certification of the sulfur mass fraction in three commercial petrol materials - Certified reference materials ERM-EF211, ERM-EF212 and ERM-EF213 N2 - Three petrol reference materials were certified for their total sulfur content in support of Directive 2003/17/EC of the European Parliament and of the European Council, which stipulates that petrol with a maximum S content of 10 mg/kg must be available in all member states by 2009. Commercially available petrol was obtained and filled into borosilicate ampoules without further treatment. Homogeneity of the materials was tested and no heterogeneity was detected for two of the materials, whereas minor heterogeneity was observed for the third material. Stability of the materials was tested for 8-12 months at 60 °C and no degradation was observed. Characterisation was based on isotope-dilution mass spectrometry (IDMS) applied as primary method of measurement by three European metrology institutes and certified values were assigned using all results. The certified uncertainties include contributions of (potential) heterogeneity, potential degradation as well as characterisation. The final assigned values are: ERM-EF211: 48.8 ± 1.7 mg/kg ERM-EF212: 20.2 ± 1.1 mg/kg ERM-EF213: 9.1 ± 0.8 mg/kg The materials are available from IRMM (ERM-EF211), LGC (ERM-EF212) and BAM (ERMEF213) KW - Sulfur KW - Petrol KW - IDMS PY - 2007 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-355804 SN - 978-92-79-05370-2 SN - 1018-5593 SP - 1 EP - 37 PB - European Communities CY - Luxembourg AN - OPUS4-35580 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Röhl-Kuhn, Barbara A1 - Klobes, Peter A1 - Meyer, Klaus A1 - Lorenz, Peter A1 - Lamberty, A. A1 - Gawlik, B. A1 - Muntau, H. T1 - Certification of the specific micropore volume and the median width of two microporous reference materials according to Draft-DIN 66135-4 T2 - EUR KW - Poröse Materialien KW - ZRM-Entwicklung KW - Gasadsorption KW - Mikroporenbestimmung PY - 2004 UR - https://ec.europa.eu/jrc/sites/default/files/rm/BCR-704_report.pdf SN - 1018-5593 IS - 21065 SP - I-III, 5-38 PB - Office for Official Publications of the European Communities CY - Luxembourg AN - OPUS4-5195 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Meier, Klaus A1 - Wäthen, U. A1 - Kipphardt, Heinrich A1 - Lamberty, A. A1 - Robouch, P. T1 - The certification of the mass fraction of Cd, Cu, Fe, Pb, Sn and TI in four grades of unalloyed zinc intended for use in emission spectrometry - BCR-322R, BCR-323R, BCR-324R, BCR-325R, Project Report EUR 20267 EN PY - 2002 SN - 92-894-3706-5 SP - 1 EP - 55 PB - Office for Official Publications of the European Communities CY - Luxembourg AN - OPUS4-1606 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -