TY - RPRT A1 - Kühn, B. A1 - Lukic, M. A1 - Nussbaumer, A. A1 - Günther, H.P. A1 - Helmerich, Rosemarie A1 - Herion, S. A1 - Kolstein, M.H. A1 - Walbridge, S. A1 - Androic, B. A1 - Dijkstra, O. A1 - Bucak, Ö. A1 - Sedlacek, G. A1 - Bijlaard, F. A1 - Géradin, M. A1 - Pinto, A. A1 - Dimova, S. T1 - Assessment of existing steel structures - Recommendations for estimation of remaining fatigue life KW - Assessment KW - Existing steel structures PY - 2008 SN - 1018-5593 SP - 1 EP - 108 PB - Office for Official Publications of the European Communities CY - Luxembourg AN - OPUS4-17556 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Darlatt, Erik A1 - Nefedov, A. A1 - Traulsen, C.H.-H. A1 - Poppenberg, J. A1 - Richter, S. A1 - Dietrich, Paul A1 - Lippitz, Andreas A1 - Illgen, René A1 - Kühn, Julius A1 - Schalley, C.A. A1 - Wöll, Ch. A1 - Unger, Wolfgang T1 - Interperetation of experimental N K NEXAFS of azide, 1,2,3-triazole and terpyridyl groups by DFT spectrum simulations N2 - Experimental N K-edge NEXAFS data of surface immobilized azide, 1,2,3-triazole and terpyridyl groups are interpreted with the help of DFT spectrum simulations. Assignments of π* resonances in experimental N K-edge NEXAFS spectra to nitrogen atoms within these functional groups have been made. The azide was immobilized on gold as the head group of a thiol SAM, 1,2,3-triazole was formed on this SAM by click reaction and terpyridyl groups were introduced as substituents of the acetylene used for the click reaction. For azide-terminated molecules, DFT spectrum simulations are found to be useful to find measurement conditions delivering experimental N K-edge NEXAFS data with negligible X-ray damage. The 1,2,3-triazole group is found to be rather stable under X-ray irradiation. KW - N K-edge NEXAFS KW - XANES KW - Surface click chemistry KW - Density functional theory KW - Azide KW - 1,2,3-Triazole PY - 2012 U6 - https://doi.org/10.1016/j.elspec.2012.09.008 SN - 0368-2048 SN - 1873-2526 VL - 185 IS - 12 SP - 621 EP - 624 PB - Elsevier CY - Amsterdam AN - OPUS4-27774 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klobes, Peter A1 - Minor, D. B. A1 - Röhl-Kuhn, B. A1 - Zimathies, Annett A1 - Prinz, C. A1 - Leigh, S. D. A1 - Heckert, N. A. A1 - MacDonald, B. S. T1 - Porosimetrie-Standard NIST SRM 1917 / CRM BAM-P 127 - Das erste von NIST und BAM gemeinsam zertifizierte Referenzmaterial T2 - 6. Workshop über die Charakterisierung von Feinteiligen und Porösen Festkörpern CY - Bad Soden, Deutschland DA - 2002-11-14 PY - 2002 CY - Bad Soden AN - OPUS4-1500 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kelm, Jürgen A1 - Kühn, H. A1 - Klein, M. A1 - Wiesmath, A. A1 - Demco, D.E. A1 - Blümich, B. A1 - Gold, P.W. T1 - The NMR-MOUSE: quality control of elastomers KW - NMR-MOUSE KW - Double-quantum NMR KW - Quality control KW - Elastomers PY - 2001 SN - 1090-7807 SN - 0022-2364 VL - 19 SP - 497 EP - 499 PB - Elsevier CY - San Diego, Calif. AN - OPUS4-1034 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weidner, Steffen A1 - Holländer, A. A1 - Kühn, Gerhard T1 - Matrix-assisted Laser Desorption/Ionization Mass Spectrometry of C36- Alkane degradated by Vacuum Ultraviolet Radiation PY - 1997 SN - 0951-4198 SN - 1097-0231 VL - 11 SP - 447 EP - 450 PB - Wiley CY - Chichester AN - OPUS4-11095 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ostermann, Markus A1 - Kühn, Andreas A1 - Bjeoumikhov, A. A1 - Wedell, R. T1 - Einsatz der Röntgenfluoreszenzanalyse in der Prozessanalytik N2 - Elementanalyse mit Röntgenfluoreszenzspektrometrie direkt am Materialstrom in Produktionsprozessen gewinnt zunehmend an Bedeutung. Die Röntgenfluoreszenzspektrometrie kann aufgrund der technischen Entwicklung mittlerweile ohne aufwändige Probenvorbereitung als aussagekräftige Informationsquelle für Stoffparameter im industriellen Prozess eingesetzt werden. Der Einsatz von online Röntgenfluoreszenzanalyse zahlt sich sowohl finanziell als auch zeitlich schnell aus, da sie sowohl für den ökonomischen Einsatz von Rohmaterialien, als auch z. B. im Materialrecycling zu gebrauchen ist. In diesem Beitrag werden vier unterschiedliche Einsatzmöglichkeiten beschrieben. N2 - Elemental analysis directly at the material stream of production processes using X-ray fluorescence spectrometry is gathering importance. Thanks to technical developments, X-ray fluorescence analysis can be used as information source in the elemental analysis of material in industrial processes without tedious sample preparation steps. The employment of online X-ray fluorescence analysis pays off both in financial as well in time aspects, since it can be used for the economic application of raw materials or e. g. for recycling. This paper describes four different applications of X-ray fluorescence spectroscopy. KW - Röntgenfluoreszenzspektrometrie KW - Stoffparameter KW - Materialanalyse KW - X-ray fluorescence spectrometry KW - Elemental analysis KW - Material analysis PY - 2011 U6 - https://doi.org/10.1524/teme.2011.0162 SN - 0340-837X SN - 0178-2312 SN - 0171-8096 VL - 78 IS - 12 SP - 559 EP - 568 PB - Oldenbourg CY - München AN - OPUS4-24973 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Röhl-Kuhn, Barbara A1 - Klobes, Peter A1 - Meyer, Klaus A1 - Lorenz, Peter A1 - Lamberty, A. A1 - Gawlik, B. A1 - Muntau, H. T1 - Certification of the specific micropore volume and the median width of two microporous reference materials according to Draft-DIN 66135-4 KW - Poröse Materialien KW - ZRM-Entwicklung KW - Gasadsorption KW - Mikroporenbestimmung PY - 2004 UR - https://ec.europa.eu/jrc/sites/default/files/rm/BCR-704_report.pdf SN - 1018-5593 IS - 21065 SP - I-III, 5-38 PB - Office for Official Publications of the European Communities CY - Luxembourg AN - OPUS4-5195 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hähner, P. A1 - Rinaldi, C. A1 - Bicego, V. A1 - Affeldt, E. E. A1 - Brendel, T. A1 - Andersson, H. A1 - Beck, T. A1 - Klingelhöffer, Hellmuth A1 - Kühn, Hans-Joachim A1 - Köster, A. A1 - Loveday, M. A1 - Marchionni, M. A1 - Rae, C. T1 - Research and development into a European code-of-practice for strain-controlled thermo-mechanical fatigue testing N2 - Thermo-mechanical fatigue (TMF) testing plays an increasingly important role in the design, the reliability assessment and the lifecycle management of safety critical components used, for instance, for power generation, in the process industry and in aeronautical and automotive applications, with a view to increasing the fuel efficiency, safety and service intervals, while reducing production (and material) costs. In a European Commission funded research project (acronym: TMF-Standard) of the 5th Framework Programme, 20 European laboratories have undertaken a joint research effort to establish a validated code-of-practice (CoP) for strain-controlled TMF testing. Starting from a survey of the testing protocols and procedures previously used by the partners, a comprehensive pre-normative research activity into various issues has been completed, addressing the dynamic temperature control, the effects of deviations in nominal temperatures and phase angles, the influences of temperature gradients, as well as the practicalities of test interruption and restart procedures. Meaningful allowable tolerances for the various test parameters were identified and practical recommendations as to the test techniques were formulated. From this a preliminary CoP was compiled and used to guide an extensive round robin exercise among the project partners. From the statistical analysis of that exercise, a validated CoP was derived dealing with strain-controlled constant amplitude TMF of nominally homogeneous metallic materials subjected to spatially uniform temperature fields and uniaxial mechanical loading. It is intended to give advice and guidance on the appropriate test setup, testing procedures and the analysis of results, in particular for newcomers in the field of strain-controlled TMF. This paper highlights some of the results of the TMF-Standard project. Moreover, commonalities and differences of the present CoP with respect to the standard documents for strain-controlled TMF, which have been developed at ISO and ASTM levels, are presented in this paper. KW - Thermo-mechanical fatigue KW - Ni-base superalloy KW - Standardisation KW - Test methods PY - 2008 U6 - https://doi.org/10.1016/j.ijfatigue.2007.01.052 SN - 0142-1123 VL - 30 IS - 2 SP - 372 EP - 381 PB - Elsevier CY - Oxford AN - OPUS4-17536 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Quell, P. A1 - Knops, M. A1 - Heinicke, M. A1 - Rettenmeier, A. A1 - Kühn, M. A1 - Rücker, Werner A1 - Baeßler, Matthias A1 - Rolfes, R. A1 - Haake, G. A1 - Hahn, B. A1 - Benesch, M. A1 - van Radecke, H. A1 - Finger, K. A1 - Neumann, T. A1 - Herklotz, K. T1 - Offshore Wind Energy Research in Germany - RAVE - Research at Alpha VEntus N2 - To start the large-scale deployment of offshore wind in German waters, the German Federal Ministry for the Environment (BMU) supports the offshore test site "alpha ventus" in the North Sea with a research budget of about 50 million Euro in the next years. The overall objective of the research is to reduce the costs of offshore wind energy deployment in deep water. In order to provide all participating research projects with detailed data, the test site will be equipped with extensive measurement instrumentation. This research initiative was named RAVE – Research at Alpha VEntus – and consists of a variety of projects in connection with the installation and operation of alpha ventus. As part of the RAVE initiative, so far the participating institutes and companies have prepared projects on the following topics: • Realization of the joint measurements and data management • Analysis of loads, modelling and further development of the different components of offshore wind turbines • Loads at offshore foundations and structures • Further development of LIDAR wind measuring techniques • Grid integration of offshore wind energy • Monitoring of the offshore wind energy deployment in Germany – "Offshore WMEP" • Measurement of the operating noises and modelling of the sound propagation between tower and water • Ecologic research T2 - European Offshore Wind 2007 Conference & Exhibition CY - Berlin, Germany DA - 2007-12-04 KW - Offshore Wind Energy KW - Rave KW - Foundations PY - 2007 SP - 1 EP - 10 AN - OPUS4-17976 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Helmerich, Rosemarie A1 - Kühn, B. A1 - Nussbaumer, A. T1 - Assessment of existing steel structures - A guideline for estimation of the remaining fatigue life N2 - In many countries and regions, traffic infrastructure projects suffer from low funding. The budget is tight for new infrastructure building and, thus, the importance of inspection, maintenance and assessment of the existing traffic infrastructure increases. A new fatigue assessment guideline for the estimation of the remaining fatigue life of steel bridges has been written by technical committee 6 of the European Convention of Constructional Steelwork (ECCS). It will be a useful tool for the complementation of bridge management systems, used commonly for condition assessment. Design specifications and rules are harmonised throughout Europe. They are under constant development, but there is still a lack of forwarding and concentrating experiences as well as developing rules for the fatigue assessment on existing steel structures. This paper presents a guideline with a proposed fatigue assessment procedure for existing steel structures embedded in information about old materials and non-destructive testing methods for the evaluation of details (ECCS 2004, Assessment of existing steel structures). Particular attention is paid on remedial measures which are proposed for weak details and damages caused by fatigue. The developed fatigue assessment procedure can be applied to existing steel structures under cyclic loading in general, but the guideline concentrates on the existing traffic infrastructure made from old steel, because of the public importance. The proposed procedure summarizes, regroups and arranges the knowledge in the field of assessment on existing steel to be applied by practicing engineers. The procedure is a milestone in knowledge transfer from a state of scientific knowledge to state-of-the-art. KW - Fatigue KW - Assessment KW - Maintenance KW - Reliability KW - Material KW - Old steel KW - Remedial measures KW - Existing steel structures PY - 2007 SN - 1573-2479 SN - 1744-8980 VL - 3 IS - 3 SP - 245 EP - 255 PB - Taylor & Francis CY - London AN - OPUS4-15042 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühn, B. A1 - Sedlacek, G. A1 - Helmerich, Rosemarie A1 - Nussbaumer, A. ED - Gebbeken, N. T1 - Assessment of existing steel structures - A guideline for estimation of the remaining fatigue life T2 - Munich Bridge Assessment Conference (MBAC 2007) CY - Munich DA - 2007-07-09 KW - Existing structures KW - Fatigue life KW - Bridge assessment KW - Non-destructive testing PY - 2007 SP - 1 EP - 15 PB - Institut für Konstruktiven Ingenieurbau CY - Neubiberg AN - OPUS4-15743 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kühn, B. A1 - Helmerich, Rosemarie A1 - Nussbaumer, A. A1 - Günther, H.-P. A1 - Herion, S. T1 - Beurteilung bestehender Stahltragwerke: Empfehlungen zur Abschätzung der Restnutzungsdauer N2 - Die zunehmende Bedeutung der Nachhaltigkeit im Bauwesen wird in Zukunft das Bauen im Bestand gegenüber Neubauten in den Vordergrund rücken. Dies gilt auch für den Brückenbau, wo das Qualitätsmanagement seit langem Brücken von ihrem Entstehungsgang über den Betrieb bis in die Entsorgung begleitet. Die starke Vergrößerung der Frachtvolumina für Straße und Schiene und die zunehmende Überalterung des Brückenbestandes fragen danach, ob die bestehenden Brücken für die veränderten Betriebsbedingungen noch geeignet sind und wie sie und ob sie dafür instandgesetzt werden könnten. Für die erforderlichen Instandhaltungs- und Instandsetzungsmaßnahmen oder einen eventuellen Ersatz durch einen Neubau ist aber die Frage der Restnutzungsdauer von entscheidender Bedeutung. Es ist daher nicht von ungefähr, dass sich Baulast-träger auf nationaler und internationaler Ebene frühzeitig zusammengetan haben, um nach geeigneten Methoden der Bestimmung der Sicherheit und Restnutzungsdauer bestehender Brücken zu forschen. Auch die internationalen technisch-wissenschaftlichen Verbände wie EKS und fib sowie die Standard-Organisationen ISO und CEN sind der Frage eines internationalen Austauschs und der Vereinheitlichung der Methoden nachgegangen. Für Stahlbrücken hat insbesondere das technische Komitee6 - Ermüdung - der EKS Anregungen aufgegriffen, aus den verschiedenen nationalen Erfahrungen und dem vorhandenen Wissen technische Empfehlungen für die Beurteilung bestehender Stahlbrücken zu entwickeln [1], die sich als Grundlage für die von CEN/TC 250 - das CEN-Komitee für die Bearbeitung der Eurocode - geplante Erweiterung der Eurocode zur Instandhaltung und Instandsetzung des Brückenbestandes eignen. Das Ergebnis ist ein technisch-wissenschaftlicher Bericht, der im Rahmen der Zusammenarbeit der europäischen Kommission (DG-Research - Joint Research Centre JRC) mit der EKS als Basispapier für eine zukünftige Eurocode-Erweiterung veröffentlicht wurde und schon jetzt als Empfehlung für eine Vorgehensweise nach dem Stand der Technik verwendet werden kann. Der vorliegende Beitrag behandelt die Grundzüge dieses Berichtes [1], der vom e-bookshop der Kommission kostenfrei herunter geladen werden kann. PY - 2008 U6 - https://doi.org/10.1002/stab.200810072 SN - 0038-9145 SN - 1437-1049 SN - 0932-6375 VL - 77 IS - 8 SP - 595 EP - 607 PB - Ernst CY - Berlin AN - OPUS4-17893 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Braml, T. A1 - Wimmer, J. A1 - Maack, Stefan A1 - Küttenbaum, Stefan A1 - Kuhn, T. A1 - Reingruber, M. A1 - Gordt, A. A1 - Hamm, J. ED - Krieger, J. T1 - Datenablage als Grundlage für den digitalen Zwilling eines Bauwerks – Verwaltungsschale BBox N2 - Der Weg zur digitalen Brücke ist eingeschlagen. Im Bereich der Planung, Bauüberwachung und -ausführung wird aktuell das Building Information Modelling (BIM) eingeführt. Ist eine Brücke in der Baulast von Bund und Ländern errichtet, wird ihr Zustand im Zuge von wiederkehrenden Bauwerksprüfungen nach DIN 1076 lückenlos überwacht. Abgespeichert werden die Informationen der Überwachung in einer Datenbank (ASB-ING Teilsystem Bauwerksdaten). Aus dieser Datenbank können anschließend relevante Informationen in ein objektspezifisches Bauwerksbuch überführt werden. In dieser Datenbank werden im Vorfeld definierte Daten abgespeichert. Reine Messdaten oder aber auch die verwendeten ingenieurtechnisch-physikalischen Modelle verbleiben in der Regel bei den beauftragen Dienstleistern. Zusammengefasst existieren verschiedene parallele Insellösungen der Informationsablage. Gegenstand verschiedener Forschungsanstrengungen ist es nun Lösungen zu finden, die einen ganzheitlichen Ansatz für den Informationsfluss von der Errichtung über den Betrieb bis hin zum Abbruch eines Bauwerkes sicherstellen. Im Rahmen einer prototypischen Entwicklung wird auf Grundlage, des für die Industrie 4.0 entwickelten open source Software Framework Eclipse BaSyx, ein möglicher Lösungsansatz – die Verwaltungsschale BBox (Bridge Box) - präsentiert. Dieser Lösungsansatz stellt das physikalisch-ingenieurtechnische Modell zur Zustandsbewertung der Brücke gedanklich in den Mittelpunkt. Unter der Voraussetzung einer durchgängigen Digitalisierung der gesamten Prozessschritte innerhalb der Lebensdauer der Brücke, kann jeder Planungs- und Fertigungsschritt, die Instandhaltung einschließlich des Rückbaus erfasst werden. Das Besondere hierbei ist, dass auch die Grundlagen der Bewertung, wie Messdaten, mit abgespeichert werden. Die Modellstruktur der Verwaltungsschale erlaubt hierbei eine bedarfsgerechte Granularität hinsichtlich der Messdaten auf allen virtuellen Ebenen, um das physikalisch-ingenieurtechnisch Modell mit Daten zu versorgen. Die gewählte Form der Datenablage bildet den Grundstein für zukünftige KI-Auswertungen z.B. mit den Methoden des Maschinellen Lernens (ML). Der Zugriff auf die dafür jeweils benötigten Daten wird durch die Ablage der Daten einschließlich Metadaten und den Einsatz einer Standard S3 Schnittstelle stark vereinfacht. Der Beitrag stellt die Entwicklung und die Systemarchitektur der BBox am Beispiel von 2 Projekten dar. T2 - 1. Fachkongress Digitale Transformation im Lebenszyklus der Verkehrsinfrastruktur CY - Esslingen, Germany DA - 29.05.2021 KW - Brücke KW - Digitalisierung KW - Digitaler Zwilling KW - Datenablage PY - 2021 UR - https://elibrary.narr.digital/article/99.125005/dtv202110075 SN - 2748-9221 IS - 1 SP - 75 EP - 84 PB - expert verlag AN - OPUS4-56159 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Braml, T. A1 - Wimmer, J. A1 - Varabei, Y. A1 - Maack, Stefan A1 - Küttenbaum, Stefan A1 - Kuhn, T. A1 - Reingruber, M. A1 - Gordt, A. A1 - Hamm, J. T1 - Digitaler Zwilling: Verwaltungsschale BBox als Datenablage über den Lebenszyklus einer Brücke T1 - Digital twin: Asset administration shell BBox as data storage over the life cycle of a bridge N2 - Auf dem Weg zur digitalen Brücke existieren bereits erste Lösungen, die den Lebenszyklus einer Brücke abbilden können. Für die Planung, den Bau und den Unterhalt stehen unterschiedlichste Werkzeuge, z. B. BIM, DIN 1076, SIB-Bauwerke, Monitoring etc. zur Verfügung, die jeweils mit unterschiedlichen Datenformaten arbeiten. Für ein intelligentes Erhaltungsmanagement müssen aber alle Daten mit den verschiedenen Datenformaten zusammengeführt, abgelegt und so verwaltet werden können, dass über den gesamten Lebenszyklus einer Brücke die Abbildung eines ganzheitlichen digitalen Zwillings eines Bauwerks möglich ist. Die Autoren haben dafür mit BBox den Prototyp einer Verwaltungsschale (VWS) auf Grundlage von Industrie 4.0 entwickelt. Damit wird das physikalisch-ingenieurtechnische Modell zur Zustandsbewertung der Brücke in den Mittelpunkt gestellt und der gesamte Lebenszyklus einer Brücke kann unabhängig von Datenformaten digital erfasst werden. Da der Aufbau der VWS durch die Granularität optimal strukturiert ist, bietet die Ablage und Einspeisung von Messdaten sowohl die Grundlage eines Live-Monitorings als auch den Grundstein für maschinelles Lernen (ML). Der Datenzugriff via S3-Schnittstelle erleichtert die Entwicklung von eigenen Prognosemodellen mit Informationsmustern (SHIP – Structural Health Information Pattern). Am Beispiel der Heinrichsbrücke Bamberg wird die praktische intelligente Umsetzung des Bauwerksmonitorings inkl. VWS mit Informationsmustern und ML gezeigt. N2 - On the way to the digital bridge, initial solutions already exist that can map the life cycle of a bridge. A wide variety of tools are available for planning, construction and maintenance, e. g. BIM, DIN 1076, SIB structures, monitoring etc., each of which works with different data formats. For an intelligent maintenance management, however, all data with the different data formats must be merged, stored, and managed in such a way that the mapping of a holistic digital twin of a structure is possible over the entire life cycle of a bridge. For this purpose, the authors have developed BBox, a prototype of an asset administration shell (AAS) based on Industry 4.0. This places the physical-engineering model for assessing the condition of the bridge at the center, and the entire life cycle of a bridge can be digitally recorded independently of data formats. Since the structure of the AAS is optimally structured through granularity, the storage and feeding of measurement data provides both the basis of live monitoring and the cornerstone for machine learning (ML). The data access via S3 interface facilitates the development of own prognosis models with information patterns (SHIP – Structural Health Information Pattern). Using the Heinrichsbrücke Bamberg as an example, the practical intelligent implementation of structural monitoring incl. AAS with information patterns and ML is shown. KW - Digitaler Zwilling KW - Lebenszyklus KW - Bauwerksmonitoring KW - Industrie 4.0 KW - Maschinelles Lernen KW - Digital twin KW - Life cycle KW - Structural health monitoring KW - Industry 4.0 KW - Machine learning PY - 2021 U6 - https://doi.org/10.1002/bate.202100094 SN - 1437-0999 SP - 1 EP - 9 PB - Ernst & Sohn CY - Berlin AN - OPUS4-54017 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Braml, T. A1 - Wimmer, J. A1 - Maack, Stefan A1 - Küttenbaum, Stefan A1 - Kuhn, T. A1 - Reingruber, M. A1 - Gordt, A. A1 - Hamm, J. ED - Krieger, J. T1 - Datenablage als Grundlage für den digitalen Zwilling eines Bauwerks – Verwaltungsschale BBox N2 - Der Beitrag stellt die Entwicklung und die Systemarchitektur der BBox am Beispiel von 2 Projekten dar. T2 - 1. Fachkongress Digitale Transformation im Lebenszyklus der Verkehrsinfrastruktur CY - Esslingen, Germany DA - 29.06.2021 KW - Digitaler Zwilling KW - Bestandsbauwerke KW - Physikalisches Modell PY - 2021 SN - 978-3-8169-3530-8 SP - 75 EP - 84 PB - expert Verlag CY - Tübingen AN - OPUS4-52938 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ostermann, Markus A1 - Herzel, Hannes A1 - Kühn, A. A1 - Mory, D. A1 - Wedell, R. T1 - Prozessanalytik mit Online-RFA und Online-LIBS für die Regelung der Aufarbeitung von Klärschlammaschen T1 - Online Process Analytics with XRF and LIBS for the Control of the Recycling of Sewage Sludge Ashes N2 - Es wurde ein Online-Analysenverfahren zur Bestimmung von Elementgehalten in Klär-schlammaschen und deren Produkten aus einem thermochemischen Verfahren entwickelt. Durch das thermochemische Verfahren können Wertstoffe aus den Aschen wieder für die Kreislaufwirtschaft nutzbar gemacht und Schadstoffe sicher entfernt werden. Das Analysensystem ist eine Methodenkombination von Online-Laser induzierter Plasma Spektroskopie (LIBS) und Online-Röntgenfluoreszenzanalyse (RFA). Robustheit und modulare Bauweise des Verfahrens sind wichtige Anforderungen um auch für andere Anwendungen nutzbar zu sein. N2 - An online analysis method has been developed for the determination of element mass fractions in sewage sludge ashes and their products originating from a thermochemical process. Within this process resources from the sewage sludge ashes can be re-utilized for the recycling economy and pollutants can be removed. The applied analysis system is a method combination of Online-laser induced breakdown spectroscopy (LIBS) and online- X-ray fluorescence (XRF). Robustness and a modular construction are important demands for successful future applications. KW - Klärschlammasche KW - Phosphor KW - Prozessanalytik KW - Röntgenfluoreszenzanalyse KW - LIBS PY - 2016 U6 - https://doi.org/10.1002/cite.201500186 SN - 1522-2640 VL - 88 IS - 6 SP - 786 EP - 792 PB - Wiley-VCH Verlag GmbH & Co. KGaA CY - Weinheim, Germany AN - OPUS4-36334 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühn, A. A1 - Wedell, R. A1 - Ostermann, Markus A1 - Adam, Christian A1 - Herzel, Hannes A1 - Mory, D. T1 - Analytische Verfahren zur On-Line-Bestimmung von Elemementkonzentrationen in Pulvern und Aschen N2 - Die Aufbereitung kommunaler Abwässer leistet einen wichtigen Beitrag zum Schutz der Umwelt und der Reinhaltung der Gewässer. Im Zuge der Abwasserreinigung entstehen deutschlandweit jährlich ca. 2,4 Millionen Tonnen Klärschlamm. Diese Massen stellen für die Anlagenbetreiber oft eine Herausforderung bei der Entsorgung dar. Es sind jedoch neben zahllosen Schadstoffen auch anorganische Wert- und Nährstoffe enthalten deren Nutzung zunehmend attraktiv wird. Ein essenzieller und in Lagerstätten begrenzt vorhandener Nährstoff ist Phosphor. Dieser ist in Klärschlämmen enthalten und erreicht in Klärschlammaschen Konzentrationen von bis zu 10 %. Eine Verwertung als Düngemittel in der Landwirtschaft ist jedoch nur für schadstoffarme Materiale mit guter Pflanzenverfügbarkeit der Nährstoffe zulässig. Für die Aufbereitung von Klärschlämmen und Schadstoffentfrachtung von Klärschlammaschen existieren verschiedene technologische Ansätze. Für jeden Prozess ist eine analytische Überwachung der Nährstoffwerte sowie der Schadstoffgrenzwerte erforderlich. Im Vortrag werden die Ergebnisse eines Projektes zur on-line Analytik thermisch aufbereiteter Klärschlammaschen vorgestellt. Es werden die Methoden der Röntgenfluoreszenz (RFA) und der Laserplasmaspektroskopie (LIBS) parallel angewendet und verglichen. T2 - 20th Leibniz-Conference of advanced Science - Recycling CY - Lichtenwalde, Sachsen, Germany DA - 19.05.2016 KW - Klärschlammasche KW - Elementanalytik KW - RFA KW - LIBS PY - 2016 AN - OPUS4-36426 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Henkel, S. A1 - Weidner, A. A1 - Biermann, H. A1 - Kühn, Hans-Joachim A1 - Rehmer, Birgit A1 - Sonntag, Nadja T1 - LCF behavior and microstructure of alpha-brass CuZn30 under uniaxial, planar-biaxial and tension-torsion loading conditions N2 - The low-cycle fatigue behavior of cc-brass CuZn30 was irtvestigated in uniaxial (tension-compression and torional) and biaxial tests under total strain control at room temperature. Planar-biaxial fatigue tests were carried out on a servohydraulic tension-compression testing machine with and without phase shift using a cruciform specimen geometry with fixed principal stress axes. In phase and out of phase tensiontorsion tests were performed using tube shape specimens on a servohydraulic tensiontorsion testing machine. Microstructural investigations were performed by transmission electron microscopy as well as by scanning electron microscope. For all proportional load cases the equivalent strain amplitude based on a maximum shear strain energy criterion results in a similar hardening behavior and in fatigue life times within a scatter band of three. Out of phase loading results in additional cyclic hardening and reduced life time. Planar glide structures were observed in all tested cases as well as areas of pronounced strain localization in the torsional load cases. No evidence of transition to wavy glide behavior was observed. T2 - ICMFF10 - 10. International conference Multiaxial fatigue and fracture CY - Kyoto, Japan DA - 03.06.2013 KW - Fatigue biaxial PY - 2013 SP - 1 EP - 8 AN - OPUS4-32877 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Tamberg, D. A1 - Thiele, D. A1 - Brodda, B. G. A1 - Lammertz, H. A1 - Coerdt, W. A1 - Mainka, E. A1 - Görgenyi, T. A1 - Stütz, A. A1 - Aigner, H. A1 - Deron, S. A1 - Kuhn, E. T1 - Evaluation of an interlaboratory comparison of the chemical assay of U, Th oxide coated particles PY - 1981 SN - 92-0-179081-3 N1 - Serientitel: IAEA safeguards – Series title: IAEA safeguards IS - 3 SP - 1 EP - 38 PB - IAEA CY - Wien AN - OPUS4-33362 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ostermann, Markus A1 - Herzel, Hannes A1 - Adam, Christian A1 - Kühn, A. A1 - Wedell, R. A1 - Mory, D. T1 - Integrierte Systeme (RFA und LIBS) zur Düngemittelgewinnung und zum Management der Bodenfruchtbarkeit N2 - Aufgrund der natürlichen und vom Menschen verursachten Heterogenität von Böden erfordert der Erhalt und die Verbesserung ihrer Fruchtbarkeit durch landwirtschaftliche Bewirtschaftungsmaßnahmen sorgfältig geplante Ent-scheidungen, die auf einer detaillierten Erfassung der Bodeneigenschaften und einem vertieften Verständnis der Bodenprozesse beruhen. Es ist bekannt, dass die konventionelle, flächen-einheitliche Bewirtschaftung Ertragsver-luste durch zu geringe Bewirtschaftungsintensität (z. B. Düngung) auf einen Teil der Fläche verursacht, während andere Teile des Feldes zu hohe Dosen erhalten und es dadurch zu Verschwendung von Ressourcen und zu Um-weltbelastungen kommt. Trotz der Verfügbarkeit von Technologien für ortsspezifische Düngung ist die Akzeptanz ortsspezifischer Bewirtschaftung (Precision Agriculture) in der Praxis noch gering. Ein wesentlicher Grund dafür ist das Fehlen von kostengünstigen Methoden zur Erfassung der bewirtschaftungsrelevanten Bodenmerkmale. So-wohl für die elementanalytische Untersuchung von Böden als auch für die Untersuchung von Ausgangsmaterialien (z.B. Klärschlammaschen) für ihre Verwendung als Dünger ist eine zuverlässige Analytik und Prozessüberwachung erforderlich. T2 - 11. Kolloquium Arbeitskreis Prozessanalytik CY - Wien, Austria DA - 30.11.2015 KW - LIBS KW - Online-RFA KW - Düngemittelgewinnung KW - Bodenfruchtbarkeit KW - BONARES PY - 2015 SP - 23 EP - 24 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-38843 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Darlatt, Erik A1 - Traulsen, C.H.-H. A1 - Poppenberg, J. A1 - Richter, S. A1 - Kühn, Julius A1 - Schalley, C.A. A1 - Unger, Wolfgang T1 - Evidence of click and coordination reactions on a self-assembled monolayer by synchrotron radiation based XPS and NEXAFS N2 - An ethynylterpyridine was 'clicked' to an azide-terminated self-assembled monolayer on gold and characterized by synchrotron radiation based surface analysis as NEXAFS and XPS. The detection of azide and terpyridine signatures confirmed a partial click reaction at room temperature. The absence of the azides after reaction at 50 °C indicates an almost complete conversion. For the latter case successful Pd(II) coordination has been proven. The Au–S interface of the SAMs has been characterized by S 1s and S 2p XPS. KW - Synchrotron radiation XPS KW - NEXAFS spectroscopy KW - Surface click chemistry KW - Self-assembled monolayer KW - HAXPES KW - XANES PY - 2012 U6 - https://doi.org/10.1016/j.elspec.2012.02.004 SN - 0368-2048 SN - 1873-2526 VL - 185 IS - 3-4 SP - 85 EP - 89 PB - Elsevier CY - Amsterdam AN - OPUS4-25596 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Al-Falahat, A M A1 - Kardjilov, N A1 - Woracek, R A1 - Boin, M A1 - Markötter, Henning A1 - Kuhn, L T A1 - Makowska, M A1 - Strobl, M A1 - Pfretzschner, B A1 - Banhart, J A1 - Manke, I T1 - Temperature dependence in Bragg edge neutron transmission measurements N2 - A systematic study has been carried out to investigate the neutron transmission signal as a function of sample temperature. In particular, the experimentally determined wavelength-dependent neutron attenuation spectra for a martensitic steel at temperatures ranging from 21 to 700°C are compared with simulated data. A theoretical description that includes the Debye–Waller factor in order to describe the temperature influence on the neutron cross sections was implemented in the nxsPlotter software and used for the simulations. The analysis of the attenuation coefficients at varying temperatures shows that the missing contributions due to elastic and inelastic scattering can be clearly distinguished: while the elastically scattered intensities decrease with higher temperatures, the inelastically scattered intensities increase, and the two can be separated from each other by analysing unique sharp features in the form of Bragg edges. This study presents the first systematic approach to quantify this effect and can serve as a basis , for example, to correct measurements taken during in situ heat treatments, in many cases being a prerequisite for obtaining quantifiable results. KW - Neutron Bragg edge imaging KW - Debye–Waller factor KW - Temperature-dependent neutron transmission KW - Super martensitic stainless steel PY - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-556896 VL - 55 IS - Pt 4 SP - 919 EP - 928 PB - International Union of Crystallography AN - OPUS4-55689 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -