TY - CONF A1 - Schmidt, Martin T1 - Der Einfluss des Staubungsverhaltens auf druckentlastete Staubexplosionen T2 - 12. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen DA - 2015-11-05 PY - 2015 AN - OPUS4-34789 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knechtel, Sophie A1 - Schmidt, Simon A1 - Mishra, K. B. A1 - Wehrstedt, Klaus-Dieter T1 - Modellierung der Hauptbrandszenarien von flüssigem Wasserstoff (LH2) mittels CFD N2 - Die sichere Lagerung und der Transport von Flüssigwasserstoff (LH2) verlangen nach verlässlichen Abschätzungen möglicher Risiken durch Feuer oder Explosion. Aufgrund des breiten Explosionsbereichs (4 Vol.-% - 74 Vol.-%) reagiert Wasserstoff sehr schnell und produziert hohe Flammentemperaturen. Da Wasserstoffflammen ruß- bzw. farblos sind, ist Wärmestrahlung im Fernfeld kein Risikofaktor. Allerdings stellen die hohe lokale Wärmestrahlung und die nicht sichtbaren Flammen eine Gefahr für Menschen und Infrastruktur in der Nähe dar. Es ist daher notwendig die Gefahren von LH2-Feuern sorgfältig zu bewerten. Einerseits sind experimentelle Untersuchungen verschiedener Szenarien teuer, andererseits können sie teilweise auch praktisch nicht durchführbar sein. Numerische Simulationen dieser Szenarien können ein Ausweg aus diesem Problem sein. In der vorliegenden Arbeit wird ein solcher Ansatz genutzt, um große Brandszenarien mit LH2 mittels CFD (Computational Fluid Dynamics) zu modellieren und so die notwendigen Sicherheitsabstände abzuschätzen. Der Fokus liegt dabei auf der Simulation von Jet- und Pool-Feuerszenarien mit einem kommerziellen CFD-Code (Ansys CFX). Die benötigten geometrischen Modelle werden für Jet- und Pool-Feuer erstellt und mit den nötigen Randbedingungen implementiert. Wichtige Submodelle für chemische Reaktionen (Einschritt- und detaillierte Modelle), Verbrennung (Eddy-Dissipation- und Flamelet-Modell) und Strahlung (Discrete-Transfer-Modell) werden genutzt. Die maximal simulierten Flammentemperaturen liegen bei ~2100 K für Jet-Feuer und ~2300 K für Pool-Feuer. Um Aussagen zu thermischen Sicherheitsabständen zu treffen, wurden die Spezifischen Ausstrahlungen (SEP) ermittelt und anschließend entsprechende Positionsfaktoren gewählt, um verlässliche Sicherheitsabstände zu berechnen. Je nach Bedarf können CFD-Modelle sowohl für qualitative als auch für quantitative Risikobewertungen von LH2-Großbränden genutzt werden. T2 - 12. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 05.11.2015 KW - Flüssigwasserstoff KW - Großbrand KW - Poolfeuer KW - Jet-Feuer KW - CFD KW - Sicherheitsabstand PY - 2015 SN - 978-3-86011-091-1 SP - Paper P-11, 1 EP - 8 AN - OPUS4-34827 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fischer, Franziska A1 - Schmidt, M. U. A1 - Greiser, Sebastian A1 - Emmerling, Franziska T1 - The challenging case of the theophylline–benzamide cocrystal N2 - Theophylline has been used as an active pharmaceutical ingredient (API) in the treatment of pulmonary diseases, but due to its low water solubility reveals very poor bioavailability. Based on its different hydrogen-bond donor and acceptor groups, theophylline is an ideal candidate for the formation of cocrystals. The crystal structure of the 1:1 benzamide cocrystal of theophylline, C7H8N4O2·-C7H7NO, was determined from synchrotron X-ray powder diffraction data. The compound crystallizes in the tetragonal space group P41 with four Independent molecules in the asymmetric unit. The molecules form a hunter’s fence packing. The crystal structure was confirmed by dispersion-corrected DFT calculations. The possibility of salt formation was excluded by the results of Raman and 1H solid-state NMR spectroscopic analyses. KW - powder diffraction KW - theophylline KW - benzamide KW - cocrystal KW - crystal structure KW - active pharmaceutical ingredient KW - dispersion-corrected density-functional theory PY - 2016 DO - https://doi.org/10.1107/S2053229616002643 SN - 2053-2296 VL - 72 IS - 3 SP - 217 EP - 224 AN - OPUS4-35621 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Klippel, Alexander A1 - Schmidt, Martin A1 - Mücke, Olaf A1 - Krause, U. T1 - Dust concentration measurements during filling of a silo and CFD modeling of filling processes regarding exceeding the lower explosion limit N2 - Measurement and numerical simulation of local dust concentrations over time in a vessel can only be done with some uncertainty due to the complexity of the behavior of dust/air mixtures. Dust concentration was measured in a 50 m³ vessel and compared to simulations with a commercial CFD code. A 50 m³ silo was used with two different filling methods. In one setup dust was conveyed with pneumatic filling at the top. The other filling was done with pressurized air and a homogenous injection via eight nozzles. Experiments were repeated three to four times with two kinds of dusts and the results were used to evaluate reproducibility of dust concentration measurements over time in a vessel depending on the filling method. Dust concentrations over time varied up to 30% from the average for homogenous injection and even more for pneumatic filling. Numerical investigations were done with maize starch. Measured concentrations were compared to simulated ones with the commercial CFD code ANSYS CFX R14 using an Euler/Lagrange approach. Drag force, turbulent dispersion force, particle size distribution, particle surface area and particle/particle interaction were modeled. A general agreement of measurement and simulation was achieved. Numerical simulations of filling processes were used to predict parts of the vessel where the lower explosion limit is reached and exceeded. This could help to improve dust explosion protection, if it is used to find configurations where the dust concentration exceeds the lower explosion limit only in small parts of the vessel during filling, e.g. using different injection points or injection angles. The volume where LEL is reached or exceeded in a 50 m³ silo is shown for pneumatic and homogenous filling. Volume of combustible atmosphere in the vessel over time is compared for two pneumatic filling configurations and one worst-case homogenous injection configuration. KW - CFD KW - Euler/Lagrange approach KW - Dust explosion protection KW - Dust concentration measurement KW - Dust explosion KW - Dustiness KW - Dispersion KW - Venting PY - 2014 DO - https://doi.org/10.1016/j.jlp.2014.02.006 SN - 0950-4230 SN - 1873-3352 VL - 29 SP - 122 EP - 137 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-30330 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Stephan T1 - Hapten design for the production of monoclonal antibodies against Diclofenac T2 - 8. Interdisziplinäres Doktorandenseminar der GDCh CY - Berlin, Germany DA - 2014-02-23 PY - 2014 AN - OPUS4-30280 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Treumann, Hartwig A1 - Schmidt, Jürgen T1 - Die Ermittlung sicherheitstechnischer Eigenschaften von Zündhölzern und deren Verpackungen PY - 1969 SN - 0037-4504 IS - 2 SP - 27 EP - 31 PB - E. Schmidt CY - Berlin AN - OPUS4-30180 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Treumann, Hartwig A1 - Schmidt, Jürgen T1 - Die Ermittlung sicherheitstechnischer Eigenschaften von Zündhölzern und deren Verpackungen (1. Fortsetzung und Schluß) PY - 1969 SN - 0037-4504 IS - 3 SP - 57 EP - 61 PB - E. Schmidt CY - Berlin AN - OPUS4-30181 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Forler, D. A1 - Schmidt, J. P. A1 - Staude, Andreas T1 - Ein Becken aus Beckentin! - Fund des Monats Mai 2016 N2 - Bronzezeitlicher Hortfund in Mecklenburg-Vorpommern mit CT-Untersuchung an der BAM KW - Computertomographie KW - Hortfund KW - Bronzezeit KW - Mecklenburg-Vorpommern PY - 2016 UR - http://www.kulturwerte-mv.de/cms2/LAKD1_prod/LAKD1/de/Landesarchaeologie/Fund_des_Monats/index.jsp SP - 1 EP - 3 CY - Schwerin AN - OPUS4-36163 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Deppe, Hans-Joachim A1 - Schmidt, Klaus T1 - Zur Beurteilung von Holzwerkstoffen im Kurzzeit-Bewitterungsversuch PY - 1982 SN - 0018-3768 VL - 40 SP - 471 EP - 473 PB - Springer CY - Berlin AN - OPUS4-36283 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Stephan A1 - Hanelt, S. A1 - Canitz, C. A1 - Hoffmann, Holger A1 - Garbe, L.-A. A1 - Schneider, Rudolf T1 - Entwicklung monoklonaler Antikörper gegen Diclofenac N2 - Diclofenac (DCF) wird als nicht-steroidales, antientzündliches Arzneimittel gegen Fieber, Entzündungen, rheumatische Erkrankungen und Schmerzen eingesetzt. 70 % werden nach Einnahme wieder ausgeschieden. Aufgrund unvollständiger Elimination in den Kläranlagen lassen sich Rückstände im Trinkwasser und im Oberflächengewässer nachweisen. Diclofenac wird in der Umweltanalytik v.a. mittels GC-MS oder LCMS nachgewiesen. Bioanalytische Methoden machen sich die spezifische Antigen-Antikörper-Wechselwirkung zunutze, so z.B. Immunoassays. Die hierfür erforderlichen Antikörper werden durch Immunisierung mit einem Konjugat aus dem Analyten und einem Trägerprotein gewonnen. Die Kopplung kann direkt über die Carboxylfunktion von Diclofenac erfolgen. Um Abschirmungseffekte zu vermeiden, kann zwischen Protein und Analy1 ein Spacer sinnvoll sein. PY - 2015 SN - 1618-3258 SN - 1617-5301 IS - 4 SP - 107 EP - 109 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-35241 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dörfel, Ilona A1 - Steinborn, Gabriele A1 - Langner, Jeanette A1 - Krietsch, Arne A1 - Seeger, Stefan A1 - Österle, Werner A1 - Schmidt, Martin A1 - Bresch, Harald T1 - Dossier on titanium dioxide - Part 1/1 - NM 105 N2 - In November 2007, OECD’s Working Party on Manufactured Nanomaterials (WPMN) launched the Sponsorship Programme for the Testing of Manufactured Nanomaterials (hereafter the Testing Programme). The objective was to conduct specific tests, relevant to human health and environmental safety endpoints, on a variety of manufactured nanomaterials (MN). The outcomes of the Testing Programme were intended to assess the applicability of the existing test guidelines1 to nanomaterials, as well as to provide useful information on any intrinsic properties of MNs, which are different from the same bulk material with greater external dimensions. Understanding the properties of NMs is crucial to choose appropriate strategies for hazard identification, risk assessment or risk management measures. The Testing Programme involved delegations from OECD member countries, some non-member economies and other stakeholders. The broad international representation, from a range of delegations enabled the programme to pool expertise and resources without which this programme would not have been possible. KW - Nanomaterial KW - Nanoparticle KW - Sponsorship programme KW - Nano characterization PY - 2015 UR - http://www.oecd.org/env/ehs/nanosafety/dossier-on-silver-nanoparticles-part1-1.htm IS - 54 SP - 27 CY - Paris AN - OPUS4-35430 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bachmann, H. J. A1 - Bucheli, T. D. A1 - Dieguez-Alonso, A. A1 - Fabbri, D. A1 - Knicker, H. A1 - Schmidt, H.-P. A1 - Ulbricht, A. A1 - Becker, Roland A1 - Buscaroli, A. A1 - Buerge, D. A1 - Cross, A. A1 - Dickinson, D. A1 - Enders, A. A1 - Esteves, V.I. A1 - Evangelou, M. W. H. A1 - Fellet, G. A1 - Friedrich, K. A1 - Gasco Guerrero, G. A1 - Glaser, B. A1 - Hanke, U. M. A1 - Hanley, K. A1 - Hilber, I. A1 - Kalderis, D. A1 - Leifeld, J. A1 - Masek, O. A1 - Mumme, J. A1 - Paneque Carmona, M. A1 - Calvelo Pereira, R. A1 - Rees, F. A1 - Rombola, A. G. A1 - de la Rosa, J. M. A1 - Sakrabani, R. A1 - Sohi, S. A1 - Soja, G. A1 - Valagussa, M. A1 - Verheijen, F. A1 - Zehetner, F. T1 - Towards the standardization of biochar analysis: the COST action TD1107 interlaboratory comparison N2 - Biochar produced by pyrolysis of organic residues is increasingly used for soil amendment and many other applications. However, analytical methods for its physical and chemical characterization are yet far from being specifically adapted, optimized, and standardized. Therefore, COST Action TD1107 conducted an interlaboratory comparison in which 22 laboratories from 12 countries analyzed three different types of biochar for 38 physical–chemical parameters (macro- and microelements, heavy metals, polycyclic aromatic hydrocarbons, pH, electrical conductivity, and specific surface area) with their preferential methods. The data were evaluated in detail using professional interlaboratory testing software. Whereas intralaboratory repeatability was generally good or at least acceptable, interlaboratory reproducibility was mostly not (20% < mean reproducibility standard deviation < 460%). This paper contributes to better comparability of biochar data published already and provides recommendations to improve and harmonize specific methods for biochar analysis in the future. KW - Biochar KW - Analysis KW - Standardization KW - Ring test KW - Interlaboratory comparison PY - 2016 DO - https://doi.org/10.1021/acs.jafc.5b05055 SN - 0021-8561 SN - 1520-5118 VL - 64 IS - 2 SP - 513 EP - 527 PB - American Chemical Society CY - Columbus, Ohio AN - OPUS4-35289 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, D. T1 - LaB6- und W-Kathoden im REM S 180 - ein Vergleich T2 - 5. Sitzung des Arbeitsausschusses Geräteentwicklung im Arbeitskreis Rastermikroskopie CY - Wien DA - 1980-11-06 PY - 1981 SP - 27 EP - 39 PB - DVM CY - Berlin AN - OPUS4-33956 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin T1 - Homogenität und Stabilität der Ringversuchs-Probe, Interlabory test 2010/11 DIN EN 15188:2007 T2 - Kolloquium des Arbeitskreises "Brennbare Stäube":Interlabory test 2010/11 DIN EN 15188:2007 - self-ignition temperature" CY - Dresden, Deutschland DA - 2013-01-29 PY - 2013 AN - OPUS4-33533 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Stephan T1 - Entwicklung monoklonaler Antikörper gegen Diclofenac T2 - 2. Forum Junger Umweltwissenschaftler CY - Blomber, Germany DA - 2015-06-22 PY - 2015 AN - OPUS4-33642 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Stephan T1 - Entwicklung monoklonaler Antikörper gegen Diclofenac T2 - 2. Forum Junger Umweltwissenschaftler CY - Blomberg, Germany DA - 2015-06-22 PY - 2015 AN - OPUS4-33643 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hantsche, Harald A1 - Schmidt, Dieter A1 - Kempf, Gerhard A1 - Treu, Dieter ED - Vetters, H. T1 - Fortschritte bei der Automatisierung der energiedispersiven Röntgenmikroanalyse T2 - 10. Sitzung d. Arbeitskreises Rastermikroskopie in der Materialprüfung, DVM-Tag CY - Dortmund, Germany DA - 13.10.1981 PY - 1982 SP - 21 EP - 28 CY - Berlin AN - OPUS4-36328 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Erdt, René A1 - Gödde, M. A1 - Salg, St. A1 - Ittemann, L. T1 - Selbstentzündungsverhalten von Feststoffen: Validierung der Extrapolation von Labortests mithilfe halbtechnischer Versuche bis 1 m3 N2 - Vorgestellt wird ein 2018 gestartetes Projekt zur Überprüfung der Extrapolation von im Labormaßstab ermittelten Selbstentzündungstemperaturen auf technisch relevante Volumina. Für die Ermittlung reaktionskinetischer Daten von Feststoffschüttungen stehen eine Reihe von Untersuchungsmethoden zur Verfügung. Dies sind thermische Analysen wie z. B. die differential scanning calorimetry DSC sowie Mikrokalorimetrie zur hochgenauen Messung von Wärmeströmen, bei denen sehr geringe Probenmengen zum Einsatz kommen. In der Regel wird das Selbstentzündungsverhalten jedoch mithilfe von isoperibolen oder adiabaten Warmlagerungsversuchen beurteilt, hier liegen die Probenvolumina üblicherweise im Bereich von ca. 100 cm3 bis zu einigen Litern. Die Extrapolation über mehrere Größenordnungen auf technische Volumina birgt Unsicherheiten, da mit Zunahme des Lagervolumens veränderte Start- und Randbedingungen vorliegen können. Zudem besteht die Möglichkeit, dass bei in technischen Lagern vorherrschenden niedrigen Temperaturen Reaktionen ablaufen, die in Standard- Laborversuchen nicht erfasst werden, aber einen wesentlichen Einfluss auf das Selbstentzündungsverhalten aufweisen können. Hauptziel des Projektes ist es daher, die im Labormaßstab vorhandenen Prüfeinrichtungen durch einen Versuchsstand zur Untersuchung von Probengrößen von bis zu 1000 dm3 zu erweitern, die Eignung (oder Nichteignung) der etablierten Methoden nachzuweisen und im Labormaßstab nicht erfassbare Einflussgrößen zu ermitteln. Zudem sollen anhand der kleinskaligen Tests Entscheidungskriterien abgeleitet werden, ob eine Extrapolation nach den derzeit üblichen Methoden zulässig ist. T2 - 15. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Brunswick, Germany DA - 21.05.2019 KW - Selbstentzündung KW - Formalkinetische Daten KW - Halbtechnische Versuche KW - Thermoanalytische Methoden PY - 2020 SN - 0030-834X VL - 130 IS - 1 SP - 9 EP - 18 AN - OPUS4-51285 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lüth, Peter A1 - Uhlig, S. A1 - Frost, K. A1 - Malow, Marcus A1 - Michael-Schulz, Heike A1 - Schmidt, Martin A1 - Zakel, S. T1 - CEQAT-DGHS interlaboratory tests for chemical safety: Validation of laboratory test methods by determining the measurement uncertainty and probability of incorrect classification including so-called “Shark profiles” N2 - Laboratory test results are of vital importance for correctly classifying and labelling chemicals as “hazardous” as defined in the UN Globally Harmonized System (GHS) / EC CLP Regulation or as “dangerous goods” as defined in the UN Recommendations on the Transport of Dangerous Goods. Interlaboratory tests play a decisive role in assessing the reliability of laboratory test results. Interlaboratory tests performed over the last 10 years have examined different laboratory test methods. After analysing the results of these interlaboratory tests, the following conclusions can be drawn: 1. There is a need for improvement and validation for all laboratory test methods examined. 2. To avoid any discrepancy concerning the classification and labelling of chemicals, the use of validated laboratory test methods should be state of the art, with the results accompanied by the measurement uncertainty and (if applicable) the probability of incorrect classification. This paper addresses the probability of correct/incorrect classification (for example, as dangerous goods) on the basis of the measurement deviation obtained from interlaboratory tests performed by the Centre for quality assurance for testing of dangerous goods and hazardous substances (CEQAT-DGHS) to validate laboratory test methods. This paper outlines typical results (e.g. so-called “Shark profiles” – the probability of incorrect classification as a function of the true value estimated from interlaboratory test data) as well as general conclusions and steps to be taken to guarantee that laboratory test results are fit for purpose and of high quality. T2 - 13th International Symposium on Hazards, Prevention and Mitigation of Industrial Explosions (ISHPMIE 2020) CY - Braunschweig, Germany DA - 27.07.2020 KW - Dangerous goods KW - Hazardous substances KW - Interlaboratory test KW - Test method KW - Validation KW - Quality assurance KW - Measurement uncertainty KW - Incorrect classification KW - Shark profile PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-515376 UR - https://oar.ptb.de/files/download/5f3e662f4c93901010006dbf DO - https://doi.org/10.7795/810.20200724 VL - 2020 SP - 50 EP - 61 PB - Open Access Repository der Physikalisch-Technischen Bundesanstalt (PTB-OAR) CY - Braunschweig AN - OPUS4-51537 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wu, W. A1 - Wei, A. A1 - Huang, W. A1 - Zhao, Peng A1 - Schmidt, Martin A1 - Krause, Ulrich A1 - Wu, Dejian T1 - Experimental and theoretical study on the inhibition effect of CO2/N2 blends on the ignition behavior of carbonaceous dust clouds N2 - Gaseous inhibitors are used in many industries for the explosion prevention of combustible dusts, mitigating the potential hazard to humans, properties and environments. This work experimentally and theoretically studied the inerting effect of gaseous inhibitors on the ignition process of dust clouds in O2/N2/CO2 atmospheres, with an emphasis on the role of the CO2/N2 ratio. 10 different combustible carbonaceous dusts were selected, including grain dust, biomass dust and coal dust. Experimental results showed that the inhibition effect of CO2/N2 is closely related to the ignition mechanism of dust clouds. Specifically, a higher ratio of CO2/N2 yields a stronger inhibition effect on the ignition process of dust samples with relatively low volatile matter contents predominated by heterogeneous ignition. In addition, two novel steady-state ignition mechanism models were developed to interpret the experimental observations. Maxwell-Stefan equations were used to describe the diffusivity in the ternary O2/N2/CO2 gas mixtures. The analytical results were in good agreement with the experimental data of the minimum ignition temperature of dust cloud (MITC) in oxygen-lean atmospheres. The mechanism modelling can be used to estimate the critical ignition temperature of all carbonaceous dust clouds with a wide range of volatile matter content under different inert atmospheres, which will provide a reference for the explosion hazard assessment of dust posed by a hot surface in the process industries. KW - CO2/N2 ratio KW - Inerting effect KW - Volatile matter content KW - MITC KW - Mechanism model PY - 2021 DO - https://doi.org/10.1016/j.psep.2021.07.005 SN - 0957-5820 VL - 153 SP - 1 EP - 10 PB - Elsevier B.V. AN - OPUS4-53662 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -