TY - JOUR A1 - Kricheldorf, H.R. A1 - Rabenstein, M. A1 - Langanke, D. A1 - Schwarz, G. A1 - Schmidt, M. A1 - Maskos, M. A1 - Krüger, Ralph-Peter T1 - Ring-closing polycondensations N2 - The role of cyclization in polycondensations is discussed for two different scenarios: thermodynamically-controlled polycondensation (TCPs) on the one hand and kinetically-controlled polycondensations (KCPs) on the other. The classical Carothers–Flory theory of step-growth polymerization does not include cyclization reactions. However, TCPs involve the formation of cycles via ‘back-biting degradation’, and when the ring–chain equilibrium is on the side of the cycles the main reaction products of the TCP will be cyclic oligomers. Two groups of examples are discussed: polycondensations of salicyclic acid derivatives (e.g. aspirin) and polycondensations of dibutyltin derivatives with long {alpha}-, {omega}-diols or dicarboxylic acids. Furthermore, various kinetically-controlled syntheses of polyesters and polyamides were studied and carefully optimized in the direction of high molecular weights. High fractions of cyclic oligomers and polymers were found by MALDI-TOF mass spectrometry, and their fractions increased with optimization of the process for molecular weight. These results disagree with the Carothers–Flory theory but agree with the theoretical background of the Ruggli–Ziegler dilution method (RZDM). When poly(ether-sulfone)s were prepared from 4,4'-difluorodiphenylsulfone and silylated bisphenol-A two different scenarios were found. With CsF as catalyst at a temperature of more than 145°C cyclic oligoethers were formed under thermodynamic control. When the polycondensation was promoted with K2CO3 in N-methylpyrolidone at ?145°C the formation of cyclic oligoethers and polyethers occurred under kinetic control. A new mathematical formula is presented correlating the average degree of polymerization with the conversion and taking into account the competition between cyclization and propagation. PY - 2001 DO - https://doi.org/10.1088/0954-0083/13/2/312 SN - 0954-0083 SN - 1361-6412 VL - 13 SP - S123 EP - S136 PB - Sage Publ. CY - London AN - OPUS4-2178 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Heinrich, F. A1 - Schmidt, C. A1 - Löffler, E. A1 - Menzel, Michael A1 - Grünert, W. T1 - Fe-ZSM-5 Catalysts for the Selective Reduction of NO by Isobutane - The Problem of the Active Sites N2 - Relations between the structure of Fe–ZSM-5 catalysts prepared by interaction of FeCl3 with H–ZSM-5 and their catalytic behavior in the SCR of NO by isobutane were investigated by combining results of catalytic studies (1000 ppm NO, 1000 ppm isobutane, and 2% O2 in He, 30,000 h-1) and of physicochemical characterization (XRD, EXAFS, Mössbauer spectroscopy, TPR, IR, XPS). By variation of the preparation conditions (method of FeCl3 introduction—chemical vapor deposition or solid-state ion exchange, washing intensity, calcination regime) and of the matrix (H–ZSM-5 with normal and high defect density), Fe–ZSM-5 materials with strongly varying properties (aggregation degree of the Fe phase, acidity) were obtained. Significant discrepancies between conclusions derived from EXAFS, TPR, and Mössbauer spectroscopy were ascribed to a preference of Mössbauer spectroscopy for the detection of aggregated phases and a high defectivity of Fe oxide clusters formed upon calcination. The critical step for the preparation of a highly disperse Fe phase is extensive washing after Fe introduction. The catalytic behavior of overexchanged Fe–ZSM-5 materials prepared by interaction of FeCl3 with H–ZSM-5 of normal defect density was not influenced by aggregation of a significant part of the Fe phase. The comparison of their catalytic properties with those of a Fe2O3/H–ZSM-5 mechanical mixture and of catalysts prepared by aqueous ion exchange or by CVD of FeCl3 into H–ZSM-5 of high defect density implies that the particular activity of overexchanged Fe–ZSM-5 arises from minority sites. In these, the Fe ions are probably isolated. Other Fe sites of low nuclearity appear to add to the activity. The poor SCR performance (at a given ability for isobutane activation) of Fe–ZSM-5 prepared with a defective ZSM-5 matrix may indicate that the Fe sites which provi de the particular activity of overexchanged Fe–ZSM-5 require the cooperation of acidic sites. KW - deNOx KW - Hydrocarbons KW - Isobutane KW - Fe-ZSM-5 KW - EXAFS KW - Mössbauer spectroscopy KW - Temperature-programmed reduction PY - 2002 DO - https://doi.org/10.1006/jcat.2002.3775 SN - 0021-9517 SN - 1090-2694 VL - 212 SP - 157 EP - 172 PB - Acad. Press CY - San Diego, Calif. AN - OPUS4-2258 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasche, K. A1 - Ulm, G. A1 - Herrmann, K. A1 - Krumrey, M. A1 - Ade, G. A1 - Sümpel, J. A1 - Busch, I. A1 - Thomsen-Schmidt, P. A1 - Schädlich, S. A1 - Schindler, A. A1 - Frank, W. A1 - Procop, Mathias A1 - Beck, Uwe T1 - About the calibration of thickness standards on the nanometer scale T2 - 3rd International EUSPEN conference ; 3rd International conference. European Society for Precision Engineering and Nanotechnology ; 4th General meeting. European Society for Precision Engineering and Nanotechnology CY - Eindhoven, The Netherlands DA - 2002-05-26 PY - 2002 SN - 90-386-2883-8 SP - 1 EP - 5 CY - Eindhoven AN - OPUS4-2283 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hasche, K. A1 - Herrmann, K. A1 - Thomsen-Schmidt, P. A1 - Krumrey, M. A1 - Ulm, G. A1 - Ade, G. A1 - Pohlenz, F. A1 - Stümpel, J. A1 - Busch, I. A1 - Schädlich, S. A1 - Frank, W. A1 - Hirsch, D. A1 - Schindler, A. A1 - Procop, Mathias A1 - Beck, Uwe T1 - Ein Beitrag zu kalibrierten Nanometerschichten für unterschiedliche Anwendungsbereiche N2 - Nanotechnologien werden gegenwärtig als leistungsfähige Oberflächentechniken in erheblichem Umfange industriell genutzt. Dabei spielen dünne Schichten und deren Kenndaten eine wesentliche Rolle, z.B. als Röntgenspiegel oder optische und magnetooptische Datenträger. Die Schichtdicke zählt hierbei zu den technologisch wichtigen Parametern. Abgeleitet von Anwenderinteressen, werden für die Röntgenreflektometrie (XRR bzw. GIXR), Elektronenstrahl-Mikroanalyse (EPMA) und Röntgenfluoreszenzanalyse (XRF) einerseits und die Ellipsometrie andererseits zugeschnittene Schichtdickenmaßverkörperungen (SDM) entwickelt, gefertigt und untersucht. Das Ziel ist die Bereitstellung praxistauglicher, kalibrierter SDM, im weiteren Schichtdickennormale (SDN) genannt. SDN sind Maßverkörperungen, für die der Schichtdickenwert mit einer definierten Messunsicherheit bekannt und auf ein metrologisch anerkanntes Längennormal zurückgeführt ist. Berichtet wird über die Herstellung und messtechnische Charakterisierung der beiden spezifischen Varianten von Maßverkörperungen. T2 - 47. Internationales Wissenschaftliches Kolloquium. Technische Universität Ilmenau ; Herbstkonferenz der Gesellschaft für Arbeitswissenschaft ; 6. Workshop Multimedia für Bildung und Wirtschaft CY - Ilmenau, Deutschland DA - 2002-09-23 PY - 2002 UR - http://publica.fraunhofer.de/documents/N-14872.html VL - 47 SP - 568 EP - 569 PB - Techn. Univ. CY - Ilmenau AN - OPUS4-2284 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Koenders, L. A1 - Hasche, K. A1 - Ulm, G. A1 - Krumrey, M. A1 - Ade, G. A1 - Stümpel, J. A1 - Busch, I. A1 - Thomsen-Schmidt, P. A1 - Schädlich, S. A1 - Schindler, A. A1 - Frank, W. A1 - Beck, Uwe A1 - Procop, Mathias T1 - Über die metrologische Charakterisierung von Schichtdicken Standards im Nanometerbereich T2 - 12th Applied Surface Analysis Workshop ; AOFA 12 CY - --- DA - 2002-09-15 PY - 2002 AN - OPUS4-2285 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Völzke, Holger A1 - Schmidt, A. J. T1 - Koordinierungsstelle für Informationen zur Behälterabfertigung (KOBAF / BIBO) T2 - 3. Symposium "Beförderung und Lagerung radioaktiver Stoffe - Stand der BE-Entsorgung" CY - Hannover, Deutschland DA - 2003-05-08 PY - 2003 AN - OPUS4-2500 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, R. A1 - Beck, Uwe A1 - Weigl, B. A1 - Gamer, Nadja A1 - Reiners, Georg A1 - Sommer, K. T1 - Topographische Charakterisierung von Oberflächen im steriltechnischen Anlagenbau PY - 2003 SN - 0009-286X SN - 1522-2640 VL - 75 IS - 4 SP - 428 EP - 431 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-2557 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rücker, Werner A1 - Rohrmann, Rolf A1 - Said, Samir A1 - Schmidt, Wolfgang ED - Feltrin, G. ED - Wenk, T. T1 - Dynamische Verfahren zur Sicherheitsüberwachung von Brückenbauwerken N2 - Referat: Nach dem gegenwärtigen Stand der Prognosen wird in den nächsten 10 bis 15 Jahren eine Zunahme des Güterverkehrs in Deutschland um 50 % angenommen. Im Jahre 2001 wurden 85 % aller transportierten Güter auf der Straße bewegt. Dies bedeutet, daß die vorhandenen Ingenieurbauwerke innerhalb der Verkehrsinfrastruktur mit zunehmendem Alter immer höhere Belastungen ertragen müssen. Zum anderen werden die zur Verfügung stehenden Mittel zum Ersatz dieser Infrastrukturbauwerke immer geringer. Eine aktuelle Bewertung dieser Bauwerke bezüglich ihrer Sicherheit und Gebrauchsfähigkeit erfordert deshalb zusätzliche Informationen hinsichtlich Art und Umfang eventuell vorhandener Schäden, deren Auswirkung auf die aktuelle Tragwirkung und Tragfähigkeit sowie Information über die vergangenen, gegenwärtigen und zukünftigen Lasteinwirkungen. T2 - D-A-CH-Tagung 2003 CY - Zürich, Schweiz DA - 2003-09-18 KW - Tragfähigkeit von Brücken KW - Dynamische Untersuchungen KW - Dauerüberwachung KW - Verkehrslasten KW - baulicher Zustand PY - 2003 UR - http://www.baufachinformation.de/aufsatz.jsp?ul=05029003231 SN - 3-908483-74-3 SP - 35 EP - 42 PB - SIA CY - Zürich AN - OPUS4-2850 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Koenders, L. A1 - Dziomba, T. A1 - Thomsen-Schmidt, P. A1 - Senoner, Mathias T1 - Normale für die dimensionelle und analytische Nanometrologie KW - Nanometrologie KW - Nanoschichten KW - Nanotechnologie KW - Oberflächenanalytik KW - Zertifiziertes Referenzmaterial PY - 2004 SN - 0030-834X VL - 114 IS - 1 SP - 16 EP - 24 PB - Wirtschaftsverl. NW CY - Bremerhaven AN - OPUS4-3001 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Dirk T1 - Anforderungen im Zusammenhang mit der Umsetzung der Seveso-II-Richtlinie Artikel 12- Was hat Land Use Planning mit Risikobewrtunf zu tun? T2 - 51. Sitzung des DECHEMA/GVC-Arbeitsausschusses "Risiko, Schadenanalyse, Zuverlässigkeit" CY - Heidelberg, Germany DA - 2003-07-15 PY - 2003 AN - OPUS4-3917 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -