TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Becker, A1 - Schmidt, T1 - Sprengtechnische Untersuchungen - Die Abnahme der Detonationsfähigkeit von gelatinösen Wettersprengstoffen bei tiefen Temperaturen - Schlagempfindlichkeit PY - 1929 SN - 0368-1785 VL - VII SP - 180 EP - 180 PB - Verl. Chemie CY - Berlin AN - OPUS4-42155 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Becker, A1 - Schmidt, T1 - Sprengtechnische Untersuchungen - Die Abnahme der Detonationsfähigkeit von gelatinösen Wettersprengstoffen bei tiefen Temperaturen - Beschaffenheit der Explosionsschwaden PY - 1929 SN - 0368-1785 VL - VII SP - 180 EP - 181 PB - Verl. Chemie CY - Berlin AN - OPUS4-42158 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Becker, A1 - Schmidt, T1 - Sprengtechnische Untersuchungen - Die Schwaden von Wetterammoniten beim Sprengen ohne Einschluß PY - 1929 SN - 0368-1785 VL - VII SP - 182 EP - 182 PB - Verl. Chemie CY - Berlin AN - OPUS4-42160 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Becker, A1 - Schmidt, T1 - Sprengtechnische Untersuchungen - Versuche über das Verhalten von Koksbeton bei Sprengstoffexplosionen PY - 1929 SN - 0368-1785 VL - VII SP - 182 EP - 184 PB - Verl. Chemie CY - Berlin AN - OPUS4-42162 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, T1 - Sprengtechnische Untersuchungen - Geschwindigkeitsmessungen mittels des optischen Chronographen - Detonationsgeschwindigkeitsmessungen an Zündschnüren PY - 1930 SN - 0368-1785 VL - VIII SP - 124 EP - 124 PB - Verl. Chemie CY - Berlin AN - OPUS4-42698 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, T1 - Thermochemische, thermodynamische und gasanalytische Untersuchungen - Experimentelle Untersuchungen über den explosiven Zerfall von Sprengstoffen PY - 1930 SN - 0368-1785 VL - VIII SP - 124 EP - 129 PB - Verl. Chemie CY - Berlin AN - OPUS4-42719 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, T1 - Thermochemische, thermodynamische und gasanalytische Untersuchungen - Über den Einfluß des Feuchtigkeitsgehaltes eines Pulvers auf die kalometrisch gemessene Explosionswärme und über den entsprechenden Einfluß von Sauerstoff in der Explosionsbombe PY - 1930 SN - 0368-1785 VL - VIII SP - 129 EP - 131 PB - Verl. Chemie CY - Berlin AN - OPUS4-42720 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, T1 - Thermochemische, thermodynamische und gasanalytische Untersuchungen - Über die Wirkungsweise und praktische Verwendungsmöglichkeit des Sewerinschen Gasanzeigers PY - 1930 SN - 0368-1785 VL - VIII SP - 131 EP - 132 PB - Verl. Chemie CY - Berlin AN - OPUS4-42722 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, T1 - Untersuchungen und Arbeiten für Behörden und ordentliche Gerichte PY - 1930 SN - 0368-1785 VL - VIII SP - 95 EP - 99 PB - Verl. Chemie CY - Berlin AN - OPUS4-42687 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, T1 - Handhabungs- und Transportsicherheit PY - 1930 SN - 0368-1785 VL - VIII SP - 99 EP - 108 PB - Verl. Chemie CY - Berlin AN - OPUS4-42689 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, T1 - Über die explosiven Eigenschaften von Düngesalzen - Explosive Eigenschaften von Düngesalzen mit Calciumnitrat PY - 1930 SN - 0368-1785 VL - VIII SP - 108 EP - 113 PB - Verl. Chemie CY - Berlin AN - OPUS4-42690 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, T1 - Über die explosiven Eigenschaften von Düngesalzen - Prüfung ammonnitrathaltiger Düngesalze mit verschiedenem Ölgehalt auf explosive Eigenschaften PY - 1930 SN - 0368-1785 VL - VIII SP - 113 EP - 115 PB - Verl. Chemie CY - Berlin AN - OPUS4-42691 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, T1 - Sprengtechnische Untersuchungen - Detonationsfähigkeit und Sprengkraft verschiedener Chloratgemische PY - 1930 SN - 0368-1785 VL - VIII SP - 115 EP - 118 PB - Verl. Chemie CY - Berlin AN - OPUS4-42693 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, T1 - Sprengtechnische Untersuchungen - Calciumnitrat als Bestandteil von Sprengstoffen PY - 1930 SN - 0368-1785 VL - VIII SP - 118 EP - 119 PB - Verl. Chemie CY - Berlin AN - OPUS4-42694 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, T1 - Sprengtechnische Untersuchungen - Sprengtechnische Eigenschaften des Trinitronaphtalins PY - 1930 SN - 0368-1785 VL - VIII SP - 119 EP - 121 PB - Verl. Chemie CY - Berlin AN - OPUS4-42695 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, T1 - Sprengtechnische Untersuchungen - Pentaerythrittetranitrat und Nitroglyzerin PY - 1930 SN - 0368-1785 VL - VIII SP - 121 EP - 121 PB - Verl. Chemie CY - Berlin AN - OPUS4-42696 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, T1 - Sprengtechnische Untersuchungen - Geschwindigkeitsmessungen mittels des optischen Chronographen - Die Detonationsgeschwindigkeiten von Sprengkapselfüllungen PY - 1930 SN - 0368-1785 VL - VIII SP - 121 EP - 124 PB - Verl. Chemie CY - Berlin AN - OPUS4-42697 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sauer, Andreas A1 - Buttler, Sabine A1 - Scharf, Holger A1 - Becker, Roland T1 - Bericht zum 23. BAM-Ringversuch "Altlasten" N2 - Präsentation der Ergebnisse eines Ringversuchs zur Kompetenzbewertung von Prüflaboratorien auf dem Gebiet der anorganischen und organischen Bodenanalytik: Polyzyklische aromatische Kohlenwasserstoffe (PAK) in Boden, Mineralölkohlenwasserstoffe (MKW) in Boden, Elemente in Sediment und Gesamtcyanid in Boden. KW - Gesamtcyanid KW - Boden KW - Eignungsprüfung KW - MKW KW - PAK KW - Schwermetalle PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-473403 SP - 1 EP - 261 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-47340 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sauer, Andreas A1 - Buttler, Sabine A1 - Becker, Roland T1 - Bericht zum 24. BAM-Ringversuch "Altlasten" N2 - Präsentation der Ergebnisse eines Ringversuchs zur Kompetenzbewertung von Prüflaboratorien auf dem Gebiet der anorganischen und organischen Bodenanalytik: Polychlorierte Biphenyle (PCB) in Boden, Mineralölkohlenwasserstoffe (MKW) in Boden, Elemente in Boden und Gesamtcyanid in Boden. KW - Spurenelemente KW - Boden KW - Gesamtcyanid KW - Eignungsprüfung KW - MKW KW - PCB PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-473418 SP - 1 EP - 183 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-47341 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Waske, Anja A1 - Dutta, B. A1 - Teichert, N. A1 - Weise, B. A1 - Shayanfar, N. A1 - Becker, A. A1 - Hütten, A. A1 - Hickel, T. T1 - Coupling Phenomena in Magnetocaloric Materials N2 - Strong coupling effects in magnetocaloric materials are the key factor to achieve a large magnetic entropy change. Combining insights from experiments and ab initio calculations, we review relevant coupling phenomena, including atomic coupling, stress coupling, and magnetostatic coupling. For the investigations on atomic coupling, we have used Heusler compounds as a flexible model system. Stress coupling occurs in first‐order magnetocaloric materials, which exhibit a structural transformation or volume change together with the magnetic transition. Magnetostatic coupling has been experimentally demonstrated in magnetocaloric particles and fragment ensembles. Based on the achieved insights, we have demonstrated that the materials properties can be tailored to achieve optimized magnetocaloric performance for cooling applications. KW - Ab initio calculations KW - Magneto-structural transition KW - Magnetocaloric materials KW - Ferroic cooling KW - Heusler alloys PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-473045 DO - https://doi.org/10.1002/ente.201800163 VL - 6 IS - 8 SP - 1429 EP - 1447 PB - Wiley AN - OPUS4-47304 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Waske, Anja A1 - Dutta, B. A1 - Teichert, N. A1 - Weise, B. A1 - Shayanfar, N. A1 - Becker, A. A1 - Hütten, A. A1 - Hickel, T. T1 - Coupling Phenomena in Magnetocaloric Materials N2 - Strong coupling effects in magnetocaloric materials are the key factor to achieve a large magnetic entropy change. Combining insights from experiments and ab initio calculations, we review relevant coupling phenomena, including atomic coupling, stress coupling, and magnetostatic coupling. For the investigations on atomic coupling, we have used Heusler compounds as a flexible model system. Stress coupling occurs in first‐order magnetocaloric materials, which exhibit a structural transformation or volume change together with the magnetic transition. Magnetostatic coupling has been experimentally demonstrated in magnetocaloric particles and fragment ensembles. Based on the achieved insights, we have demonstrated that the materials properties can be tailored to achieve optimized magnetocaloric performance for cooling applications. KW - Epitaxial thin films KW - Coupling KW - Atomic Scale KW - Stoichiometric phases KW - Multilaysers KW - Stress Coupling KW - Surface defects PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-458856 DO - https://doi.org/10.1002/ente.201800163 VL - 6 IS - 8 SP - 1429 EP - 1447 PB - Wiley-VCH AN - OPUS4-45885 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Beck, M. A1 - Becker, S. A1 - Beckmann, Jörg A1 - Cojocari, O. A1 - Feige, V. A1 - Fischer, B. A1 - Friederich, F. A1 - Globisch, B. A1 - Haupt, H. A1 - Hechtfischer, G. A1 - Hens, K. A1 - Hübers, H.-W. A1 - Jelonnek, J. A1 - Jonuscheit, J. A1 - Keil, A. A1 - Kleine-Ostmann, T. A1 - Nickel, H.-U. A1 - Peichl, M. A1 - Peters, O. A1 - Sprenger, T. A1 - Steiger, A. A1 - van Frank, S. A1 - Vieweg, N. A1 - Werner, M. A1 - Wilk, R. T1 - Terahertzsysteme - Anwendungsfelder und Systeme N2 - Die nicht ionisierende elektromagnetische Strahlung im Bereich von Terahertz-Frequenzen ermöglicht berührungslose und zerstörungsfreie Mess- und Prüftechnik in zahlreichen Bereichen. Nach ersten Anwendungen in der Astronomie und der Atmosphärenforschung wurden in letzter Zeit Anwendungsfelder in der Sicherheitstechnik, der Medizintechnik, der Nachrichtentechnik und der zerstörungsfreien Prozess- und Qualitätskontrolle erschlossen. Dielektrische Materialien wie Kunststoffe und Keramiken können von Terahertz-Wellen durchdrungen werden. Das ermöglicht Untersuchungen des Objektinneren ohne spezielle Schutzmaßnahmen, wie sie z.B. beim Röntgen notwendig sind. Die Richtlinie erleichtert die Verständigung zwischen Nutzern, Herstellern und dem Vertrieb von Terahertz-Systemen. In der Richtlinie werden bekannte Einsatzgebiete sowie die eingesetzten Verfahren und Funktionsprinzipien aufgeführt, um den Leser bei der Auswahlentscheidung zu unterstützen. Nach einer kurzen Einführung in die physikalischen Grundlagen und Hinweisen zur elektromagnetischen Verträglichkeit, zum Strahlenschutz und zur regulierten Frequenzvergabe werden die verschiedenen Geräteklassen von Terahertz-Systemen ausführlich vorgestellt. Die Richtlinie gibt Hinweise zur messtechnischen Charakterisierung von Terahertz-Wellen. Einsatzgebiete von Terahertz-Systemen, wie die zerstörungsfreie Prüfung, die Dicken- und Abstandsmessung, die Tomografie und die chemische Analytik, werden mit ihren spezifischen Eigenschaften im Detail beschrieben. Umfangreiche Literaturverweise vereinfachen eine vertiefte Beschäftigung mit den Themen der Richtlinie. Eine tabellarische Übersicht mit einer Zusammenfassung, welche Terahertz-Systeme für welche Anwendungsfelder eingesetzt werden können, vervollständigt die Richtlinie. KW - Terahertzsysteme KW - THz-Wellen PY - 2018 UR - https://www.vdi.de/5590 VL - VDI/VDE 5590 Blatt 2 SP - 1 EP - 27 PB - VDI-Verlag CY - Düsseldorf ET - Entwurf - November 2018 AN - OPUS4-46727 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kadlag, Y. A1 - Tatzel, Michael A1 - Frick, D. A. A1 - Becker, H. T1 - Silicon isotope constraints on the formation of silicates and metal in EH chondrites N2 - Bulk enstatite chondrites (EC) and their achondritic counterpart, the aubrites, have the lightest measured Si isotope composition of all rocks in the solar system. Some authors proposed that the enrichment of 28Si in EC metal by equilibrium or kinetic isotope fractionation processes in the solar nebula may have led to the negative δ30/28Si of bulk EC. Because EC are also depleted in refractory elements, loss of a heavy Si component with refractory elements might be an alternative explanation. To further constrain their genesis, we analysed for the first time in situ Si-isotope ratios simultaneously with major- and trace element abundances in silicate and metal phases of Sahara 97072 (EH3) and Indarch (EH4). T2 - 81st Annual Meeting of The Meteoritical Society 2018 CY - Moscow, Russia DA - 22.07.2018 KW - Si isotopes PY - 2018 SN - 1945-5100 VL - 53 SP - 6154 EP - 6154 PB - Wiley AN - OPUS4-46835 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Roland A1 - Sporkert, F. A1 - Lô, I. A1 - Baumgartner, M. T1 - The determination of ethyl glucuronide in hair: Experiences from nine consecutive interlaboratory comparison rounds N2 - The increasing request for hair ethyl glucuronide (HEtG) in alcohol consumption monitoring according to cut-off levels set by the Society of Hair Testing (SoHT) has triggered a proficiency testing program based on interlaboratory comparisons (ILC). Here, the outcome of nine consecutive ILC rounds organised by the SoHT on the determination of HEtG between 2011 and 2017 is summarised regarding interlaboratory reproducibility and the influence of procedural variants. Test samples prepared from cut hair (1 mm) with authentic (in-vivo incorporated) and soaked (in-vitro incorporated) HEtG concentrations up to 80 pg/mg were provided for 27–35 participating laboratories. Laboratory results were evaluated according to ISO 5725-5 and provided robust averages and relative reproducibility standard deviations typically between 20 and 35% in reasonable accordance with the prediction of the Horwitz model. Evaluation of results regarding the analytical techniques revealed no significant differences between gas and liquid chromatographic methods In contrast, a detailed evaluation of different sample preparations revealed significantly higher average values in case when pulverised hair is tested compared to cut hair. This observation was reinforced over the different ILC rounds and can be attributed to the increased acceptance and routine of hair pulverisation among laboratories. Further, the reproducibility standard deviations among laboratories performing pulverisation were on average in very good agreement with the prediction of the Horwitz model. Use of sonication showed no effect on the HEtG extraction yield. KW - Ethyl glucuronide KW - Interlaboratory comparison KW - Proficiency testing KW - Society of hair testing KW - Reproducibility KW - Pulverization PY - 2018 DO - https://doi.org/10.1016/j.forsciint.2018.04.025 SN - 0379-0738 SN - 1872-6283 VL - 288 SP - 67 EP - 71 PB - Elsevier AN - OPUS4-44881 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Paul, Andrea A1 - Wander, Lukas A1 - Becker, Roland A1 - Goedecke, Caroline A1 - Braun, Ulrike T1 - High-throughput NIR spectroscopic (NIRS) detection of microplastics in soil N2 - The increasing pollution of terrestrial and aquatic ecosystems with plastic debris leads to the accumulation of microscopic plastic particles of still unknown amount. To monitor the degree of contamination analytical methods are urgently needed, which help to quantify microplastics (MP). Currently, time-costly purified materials enriched on filters are investigated both by micro-infrared spectroscopy and/or micro-Raman. Although yielding precise results, these techniques are time consuming, and are restricted to the analysis of a small part of the sample in the order of few micrograms. To overcome these problems, here we tested a macroscopic dimensioned NIR process-spectroscopic method in combination with chemometrics. For calibration, artificial MP/soil mixtures containing defined ratios of polyethylene, polyethylene terephthalate, polypropylene, and polystyrene with diameters < 125 µm were prepared and measured by a process FT-NIR spectrometer equipped with a fiber optic reflection probe. The resulting spectra were processed by chemometric models including support vector machine regression (SVR), and partial least squares discriminant analysis (PLS-DA). Validation of models by MP mixtures, MP-free soils and real-world samples, e.g. and fermenter residue, suggest a reliable detection and a possible classification of MP at levels above 0.5 to 1.0 mass% depending on the polymer. The benefit of the combined NIRS chemometric approach lies in the rapid assessment whether soil contains MP, without any chemical pre-treatment. The method can be used with larger sample volumes and even allows for an online prediction and thus meets the demand of a high-throughput method. KW - Microplastics KW - Soil KW - Chemometrics KW - PLS-DA KW - Support vector machines KW - Near Infrared Spectroscopy PY - 2018 DO - https://doi.org/10.1007/s11356-018-2180-2 SN - 1614-7499 SN - 0944-1344 VL - 26 IS - 8 SP - 7364 EP - 7374 PB - Springer AN - OPUS4-45405 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Casperson, Ralf A1 - Pohl, Rainer A1 - Munzke, Dorit A1 - Becker, Ben A1 - Pelkner, Matthias T1 - Eddy current testing of composite pressure vessels N2 - The use of composite pressure vessels instead of conventional vessels made of steel or aluminum grew strongly over the last decade. The reason for this trend is the tremendous weight saving in case of composite vessels. However, the long-time behavior is not fully understood for filling and discharging cycles and creep strength and their influence on the CFRP coating (carbon fiber reinforced plastics) and the internal liner (steel, aluminum, or plastics). The CFRP ensures the pressure resistance while the inner liner is used as container for liquid or gas. To overcome the missing knowledge of ageing BAM started an internal project to investigate degradation of these material systems. Therefore, applicable testing methods like eddy current testing are needed. Normally, high-frequency eddy current testing (HF-ET, f > 10 MHz) is deployed for CFRP due to its low conductivity of the fiber, which is in the order of 0.01 MS/s, and the capacitive coupling between the fibers. Nevertheless, in some cases conventional ET can be applied. We show a concise summary of studies on the application of conventional ET of composite pressure vessels. T2 - QNDE 2017 CY - Provo, Utah, USA DA - 16.07.2017 KW - Eddy current KW - Composite KW - Pressure vessel PY - 2018 SN - 978-0-7354-1644-4 DO - https://doi.org/10.1063/1.5031622 SN - 0094-243X VL - 1949 SP - UNSP 160004, 1 EP - 8 AN - OPUS4-45051 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mueller, Axel A1 - Becker, Roland A1 - Dorgerloh, Ute A1 - Simon, Franz-Georg A1 - Braun, Ulrike T1 - The effect of polymer aging on the uptake of fuel aromatics and ethers by microplastics N2 - Microplastics are increasingly entering marine, limnic and terrestrial ecosystems worldwide, where they sorb hydrophobic organic contaminants. Here, the sorption behavior of the fuel-related water contaminants benzene, toluene, ethyl benzene and xylene (BTEX) and four tertiary butyl ethers to virgin and via UV radiation aged polypropylene (PP) and polystyrene (PS) pellets was investigated. Changes in material properties due to aging were recorded using appropriate polymer characterization methods, such as differential scanning calorimetry, Fourier transform infrared spectroscopy, gel permeation chromatography, X-ray photoelectron spectroscopy, and microscopy. Pellets were exposed to water containing BTEX and the ethers at 130-190 mg/L for up to two weeks. Aqueous sorbate concentrations were determined by headspace gas chromatography. Sorption to the polymers was correlated with the sorbate's Kow and was significant for BTEX and marginal for the ethers. Due to substantially lower glass transition temperatures, PP showed higher sorption than PS. Aging had no effect on the sorption behavior of PP. PS sorbed less BTEX after aging due to an oxidized surface layer. KW - BTEX KW - Polypropylene KW - Polystyrene KW - Sorption KW - Degradation PY - 2018 DO - https://doi.org/10.1016/j.envpol.2018.04.127 SN - 0269-7491 VL - 240 SP - 639 EP - 646 PB - Elsevier CY - Amsterdam AN - OPUS4-44990 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Günther T1 - Fluorine compounds for wood preservation N2 - Fluoride compounds have gained a considerable importance in wood preservation, especially in Germany and some other countries of Europe. They are used as single compounds or in mixtures of different compounds. The International Research Group on Wood Preservation which continues the activities of a former O.E.C.D.- Group, was aslced to prepare a survey on fluorides in wood preservation together with other papers on the present state of knowledge of wood preservatives and methods of application. Monofluorides and silicofluorides have been used in the field of wood preservation for about 60 years and special development and application of bifluorides (hydrogen fluorides) have been going on for 30 years. Much scientific work has been carried out on fluorides and much experience in practical use is available. It thus seems to be useful briefly to summarise the information on this group of compounds in wood preservation. Due to the voluminous literature, i.e. some 270 papers which are cited in the references, only an introduction into the Problems and main results but not a detailed review of the publications is possible. The subjects dealt with in the publications are indicated in the references. With some exceptions the brief survey is limited to the compounds and mixtures without chromium, which remain leachable in the wood. Questions of toxicity to human beings, animals and plants are not discussed in this paper. PY - 1973 VL - 32 SP - 51 EP - 62 AN - OPUS4-45409 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Günther T1 - Protection of Wood Particle Board against Termites N2 - Particle boards are of increasing economic importance. Without special treatment they are destroyed by termites. Deterioration of unprotected material as well as possibilities and present knowledge of preservation against termite attack are briefly described. Recent laboratory experiments with particle board treated to make it resistant to humidity and basidiomycete fungi showed that only one organic preservative out of four protected the boards also against termite attack; one of two water-soluble preservatives gave promising results. Heterotermes indicola (Wasmann) from India proved to be more aggressive and resistant to the preservatives than Coptotermes amanii (Sjöstedt) from Kenya and Nasutitermes nigriceps (Haldemann) from Guatemala. Kalotermes flavicollis (Fabr.) from Italy was also very tolerant to the fungicidal preservatives. Further development of treatments of particle board against termites is required. T2 - The World Consultation on the Use of Wood in Housing CY - Vancouver, B. C., Canada DA - 05.07.1971 KW - Material Processing KW - India KW - Laboratory Experiment KW - Promising Result KW - Special Treatment PY - 1972 VL - 6 IS - 3 SP - 239 EP - 248 PB - Springer AN - OPUS4-45428 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Becker, A1 - Schmidt, T1 - Sprengtechnische Untersuchungen - Über die sprengtechnischen Eigenschaften von Chloratit 3 mit verschiedenem Gehalt an Petroleum - Sprengtechnische Prüfung PY - 1929 SN - 0368-1785 VL - VII SP - 164 EP - 168 PB - Verl. Chemie CY - Berlin AN - OPUS4-42196 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Becker, A1 - Schmidt, T1 - Über die explosiven Eigenschaften von Ammonsalpeter und daraus hergestellten Düngesalzen - Prüfung verschiedener ammonnitrathaltiger Düngesalze auf explosive Eigenschaften - Ermittlung der Sprengwirkung von Nitrophoska und den entsprechenden Trockengemischen im Trauzlschen Bleiblock PY - 1929 SN - 0368-1785 VL - VII SP - 157 EP - 158 PB - Verl. Chemie CY - Berlin AN - OPUS4-42111 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Becker, A1 - Schmidt, T1 - Über die explosiven Eigenschaften von Ammonsalpeter und daraus hergestellten Düngesalzen - Prüfung verschiedener ammonnitrathaltiger Düngesalze auf explosive Eigenschaften - Sprengtechnische Versuche mit größeren Mengen PY - 1929 SN - 0368-1785 VL - VII SP - 158 EP - 160 PB - Verl. Chemie CY - Berlin AN - OPUS4-42112 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Becker, A1 - Schmidt, T1 - Über die explosiven Eigenschaften von Ammonsalpeter und daraus hergestellten Düngesalzen - Über die Brandgefährlichkeit von Ammonsalpeter und damit hergestellter Düngesalze PY - 1929 SN - 0368-1785 VL - VII SP - 160 EP - 163 PB - Verl. Chemie CY - Berlin AN - OPUS4-42113 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Becker, A1 - Schmidt, T1 - Sprengtechnische Untersuchungen - Untersuchung einiger Chloratit 3 auf chemische Zusammensetzung PY - 1929 SN - 0368-1785 VL - VII SP - 163 EP - 163 PB - Verl. Chemie CY - Berlin AN - OPUS4-42114 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Becker, A1 - Schmidt, T1 - Sprengtechnische Untersuchungen - Über die sprengtechnischen Eigenschaften von Chloratit 3 mit verschiedenem Gehalt an Petroleum PY - 1929 SN - 0368-1785 VL - VII SP - 163 EP - 164 PB - Verl. Chemie CY - Berlin AN - OPUS4-42115 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Becker, A1 - Schmidt, T1 - Sprengtechnische Untersuchungen - Empfindlichkeit von Nitroglycerin, Dinitroglykol und Dinitrochlorhydrin PY - 1929 SN - 0368-1785 VL - VII SP - 168 EP - 170 PB - Verl. Chemie CY - Berlin AN - OPUS4-42116 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Becker, A1 - Schmidt, T1 - Sprengtechnische Untersuchungen - Die Detonationsgeschwindigkeit und Brisanz von flüssigem und festem Nitroglycerin im Vergleich zu anderen energetisch nicht sehr verschiedenen Sprengstoffen PY - 1929 SN - 0368-1785 VL - VII SP - 170 EP - 171 PB - Verl. Chemie CY - Berlin AN - OPUS4-42117 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Becker, A1 - Schmidt, T1 - Handhabungs- und Transportsicherheit PY - 1929 SN - 0368-1785 VL - VII SP - 134 EP - 140 PB - Verl. Chemie CY - Berlin AN - OPUS4-42100 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Becker, A1 - Schmidt, T1 - Handhabungs- und Transportsicherheit - Prüfung verschiedener Muster von Knallkapseln PY - 1929 SN - 0368-1785 VL - VII SP - 140 EP - 144 PB - Verl. Chemie CY - Berlin AN - OPUS4-42101 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Becker, A1 - Schmidt, T1 - Über die explosiven Eigenschaften von Ammonsalpeter und daraus hergestellten Düngesalzen - Über die Zersetzung des Ammonnitrats bei Temperaturen zwischen 150° und 180° PY - 1929 SN - 0368-1785 VL - VII SP - 145 EP - 145 PB - Verl. Chemie CY - Berlin AN - OPUS4-42102 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Becker, A1 - Schmidt, T1 - Über die explosiven Eigenschaften von Ammonsalpeter und daraus hergestellten Düngesalzen - Über die Zersetzung des Ammonnitrats bei Temperaturen zwischen 150° und 180° - Temperaturmessungen PY - 1929 SN - 0368-1785 VL - VII SP - 145 EP - 148 PB - Verl. Chemie CY - Berlin AN - OPUS4-42103 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Becker, A1 - Schmidt, T1 - Über die explosiven Eigenschaften von Ammonsalpeter und daraus hergestellten Düngesalzen - Über die Zersetzung des Ammonnitrats bei Temperaturen zwischen 150° und 180° - Druckmessungen PY - 1929 SN - 0368-1785 VL - VII SP - 148 EP - 150 PB - Verl. Chemie CY - Berlin AN - OPUS4-42104 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Becker, A1 - Schmidt, T1 - Über die explosiven Eigenschaften von Ammonsalpeter und daraus hergestellten Düngesalzen - Über das Verhalten von Ammonalsalpeter bei sehr hohen Temperaturen PY - 1929 SN - 0368-1785 VL - VII SP - 150 EP - 151 PB - Verl. Chemie CY - Berlin AN - OPUS4-42105 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Becker, A1 - Schmidt, T1 - Über die explosiven Eigenschaften von Ammonsalpeter und daraus hergestellten Düngesalzen - Über den Einfluß der Temperatur und der Formart auf die Detonationsfähigkeit des Ammonsalpeters PY - 1929 SN - 0368-1785 VL - VII SP - 152 EP - 155 PB - Verl. Chemie CY - Berlin AN - OPUS4-42106 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Becker, A1 - Schmidt, T1 - Über die explosiven Eigenschaften von Ammonsalpeter und daraus hergestellten Düngesalzen - Prüfung verschiedener ammonnitrathaltiger Düngesalze auf explosive Eigenschaften PY - 1929 SN - 0368-1785 VL - VII SP - 155 EP - 155 PB - Verl. Chemie CY - Berlin AN - OPUS4-42107 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Becker, A1 - Schmidt, T1 - Über die explosiven Eigenschaften von Ammonsalpeter und daraus hergestellten Düngesalzen - Prüfung verschiedener ammonnitrathaltiger Düngesalze auf explosive Eigenschaften - Bestimmung des Gehaltes an Ammonnitrat in den Nitrophoskagemischen PY - 1929 SN - 0368-1785 VL - VII SP - 155 EP - 157 PB - Verl. Chemie CY - Berlin AN - OPUS4-42108 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Ben T1 - Uncertainty’s of statistical assessments N2 - Uncertainty’s of statistical assessments of test results from composite cylinders. T2 - Fibremod Training unit #5 CY - Berlin, Germany DA - 05.10.2017 KW - Statistics KW - Uncertainty KW - Composite cylinder PY - 2017 AN - OPUS4-42500 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, T1 - Allgemeine chemische Untersuchungen über Sprengstoffe und selbstentzündliche Stoffe - Über die Beständigkeit von Nitropentaerythrit und Hexogen PY - 1930 SN - 0368-1785 VL - VIII SP - 132 EP - 136 PB - Verl. Chemie CY - Berlin AN - OPUS4-42723 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, T1 - Allgemeine chemische Untersuchungen über Sprengstoffe und selbstentzündliche Stoffe - Über die Reaktionsfähigkeit von Metallpulvern PY - 1930 SN - 0368-1785 VL - VIII SP - 136 EP - 141 PB - Verl. Chemie CY - Berlin AN - OPUS4-42726 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, T1 - Prüfungsmethoden - Prüfung von Sprengkapseln PY - 1930 SN - 0368-1785 VL - VIII SP - 141 EP - 145 PB - Verl. Chemie CY - Berlin AN - OPUS4-42728 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, T1 - Prüfungsmethoden - Vorrichtung zum Aufschneiden von Sprengkapseln PY - 1930 SN - 0368-1785 VL - VIII SP - 145 EP - 147 PB - Verl. Chemie CY - Berlin AN - OPUS4-42729 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Thermochemische und thermodynamische Untersuchungen - Untersuchungen über die Gefahr der Vergiftung durch Kohlenoxyd bei längerem Feuern eines Maschinengewehrs aus einem abgeschlossenen Raum PY - 1935 SN - 0368-1785 VL - XIV SP - 204 EP - 204 PB - Verl. Chemie CY - Berlin AN - OPUS4-43777 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Thermochemische und thermodynamische Untersuchungen - Berechnungen über den Kohlenoxydgehalt in einem geschlossenen Raum, aus dem heraus eine Tankabwehrkanone feuert PY - 1935 SN - 0368-1785 VL - XIV SP - 204 EP - 205 PB - Verl. Chemie CY - Berlin AN - OPUS4-43778 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Thermochemische und thermodynamische Untersuchungen - Versuche zur Feststellung des Bleigehalts der Rauchschwaden, die beim Schießen (Flak) mit bleigefüllten Platzpatronen entstehen PY - 1935 SN - 0368-1785 VL - XIV SP - 205 EP - 205 PB - Verl. Chemie CY - Berlin AN - OPUS4-43779 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Thermochemische und thermodynamische Untersuchungen - Nachprüfung eines Kohlenoxydmessers PY - 1935 SN - 0368-1785 VL - XIV SP - 205 EP - 206 PB - Verl. Chemie CY - Berlin AN - OPUS4-43780 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Thermochemische und thermodynamische Untersuchungen - Untersuchungen über den Kohlenoxydgehalt der Schwaden von Chloratit 3 bei der Detonation und beim Abbrennen PY - 1935 SN - 0368-1785 VL - XIV SP - 206 EP - 207 PB - Verl. Chemie CY - Berlin AN - OPUS4-43781 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Herstellung und Untersuchung von 1,3-Dinitro-2,4,6-triazidobenzol PY - 1935 SN - 0368-1785 VL - XIV SP - 123 EP - 123 PB - Verl. Chemie CY - Berlin AN - OPUS4-43709 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Thermochemische und thermodynamische Untersuchungen - Bestimmung des Gehalts von Nitropentaerythrit-Sprengstoffen an Phlegmatisierungsmittel (Wachs) durch kalorimetrische Messungen PY - 1935 SN - 0368-1785 VL - XIV SP - 203 EP - 203 PB - Verl. Chemie CY - Berlin AN - OPUS4-43755 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Arbeiten über selbstentzündliche und sonstige gefährliche Stoffe - Selbstentzündung und Explosionsneigung von Zirkonmetall PY - 1935 SN - 0368-1785 VL - XIV SP - 165 EP - 166 PB - Verl. Chemie CY - Berlin AN - OPUS4-43734 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Arbeiten über selbstentzündliche und sonstige gefährliche Stoffe - Selbstentzündlichkeit von Zinknebelmassen (Bergermischungen) und des zu ihrer Herstellung dienenden Zinkstaubs. Sicherheitsmaßnahmen für die Fabrikation und Lagerung PY - 1935 SN - 0368-1785 VL - XIV SP - 166 EP - 167 PB - Verl. Chemie CY - Berlin AN - OPUS4-43735 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Arbeiten über selbstentzündliche und sonstige gefährliche Stoffe - Gefährlichkeit des Vermahlens von Cermagnesium mit Trichloräthylen PY - 1935 SN - 0368-1785 VL - XIV SP - 167 EP - 167 PB - Verl. Chemie CY - Berlin AN - OPUS4-43736 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Arbeiten über selbstentzündliche und sonstige gefährliche Stoffe - Selbstentzündliche Eigenschaften von Natriumhydrosulfit PY - 1935 SN - 0368-1785 VL - XIV SP - 167 EP - 168 PB - Verl. Chemie CY - Berlin AN - OPUS4-43741 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Arbeiten auf dem Gebiete des Feuerschutzes von Holz PY - 1935 SN - 0368-1785 VL - XIV SP - 168 EP - 168 PB - Verl. Chemie CY - Berlin AN - OPUS4-43742 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Arbeiten auf dem Gebiete des Feuerschutzes von Holz - Zusammenhänge zwischen der Brennbarkeit des Holzes und seinen physikalischen, anatomischen und chemischen Eigenschaften PY - 1935 SN - 0368-1785 VL - XIV SP - 168 EP - 171 PB - Verl. Chemie CY - Berlin AN - OPUS4-43743 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Arbeiten auf dem Gebiete des Feuerschutzes von Holz - Vergleichende Prüfung der Wirksamkeit chemischer Feuerschutzmittel für Holz PY - 1935 SN - 0368-1785 VL - XIV SP - 171 EP - 177 PB - Verl. Chemie CY - Berlin AN - OPUS4-43744 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Thermochemische und thermodynamische Untersuchungen - Die Zusammensetzung der Explosionsgase bei der Detonation ohne Arbeitsleistung PY - 1935 SN - 0368-1785 VL - XIV SP - 207 EP - 208 PB - Verl. Chemie CY - Berlin AN - OPUS4-43782 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Thermochemische und thermodynamische Untersuchungen - Methode zur quantitativen Bestimmung der Stickoxyde in den Explosionsgasen PY - 1935 SN - 0368-1785 VL - XIV SP - 208 EP - 209 PB - Verl. Chemie CY - Berlin AN - OPUS4-43783 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Thermochemische und thermodynamische Untersuchungen - Berechnung der Explosionswärme und -temperatur sowie des Gasvolumens von Sprengstoffen mit anorganischen Salzen und über die Bedeutung von "f" als Ausdruck für "spezifischen Druck" und "spezifische Energie" PY - 1935 SN - 0368-1785 VL - XIV SP - 209 EP - 212 PB - Verl. Chemie CY - Berlin AN - OPUS4-43784 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Thermochemische und thermodynamische Untersuchungen - Prüfung eines Erfindervorschlages betr. eine neue Sprengladung PY - 1935 SN - 0368-1785 VL - XIV SP - 212 EP - 213 PB - Verl. Chemie CY - Berlin AN - OPUS4-43785 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Über gieß- und preßbare Sprengstoffe für militärische Zwecke PY - 1935 SN - 0368-1785 VL - XIV SP - 213 EP - 213 PB - Verl. Chemie CY - Berlin AN - OPUS4-43787 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Über gieß- und preßbare Sprengstoffe für militärische Zwecke - Streckung des Trinitrotoluols durch Ammonsalpeter - Eintragen in den geschmolzenen Nitrokörper mit und ohne Zusatz von Aluminium PY - 1935 SN - 0368-1785 VL - XIV SP - 213 EP - 222 PB - Verl. Chemie CY - Berlin AN - OPUS4-43788 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Über gieß- und preßbare Sprengstoffe für militärische Zwecke - Streckung des Trinitrotoluols durch Ammonsalpeter - Herabsetzung des Schmelzpunktes des Ammonsalpeters mit Hilfe von Flußmitteln und geringem Zusatz von Trinitrotoluol PY - 1935 SN - 0368-1785 VL - XIV SP - 222 EP - 225 PB - Verl. Chemie CY - Berlin AN - OPUS4-43789 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Verwendung der Nitrokörper des Benzols und Naphthalins PY - 1935 SN - 0368-1785 VL - XIV SP - 225 EP - 232 PB - Verl. Chemie CY - Berlin AN - OPUS4-43791 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Herstellung und Untersuchung von 1,3,5-Trinitro-2,4,6-triazidobenzol PY - 1935 SN - 0368-1785 VL - XIV SP - 119 EP - 123 PB - Verl. Chemie CY - Berlin AN - OPUS4-43690 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - de Souza Machado, A. A. A1 - Lau, C. W. A1 - Till, J. A1 - Kloas, W. A1 - Lehmann, A. A1 - Becker, Roland A1 - Rillig, M. C. T1 - Impacts of microplastics on the soil biophysical environment N2 - Soils are essential components of terrestrial ecosystems that experience strong pollution pressure. Microplastic contamination of soils is being increasingly documented, with potential consequences for soil biodiversity and function. Notwithstanding, data on effects of such contaminants on fundamental properties potentially impacting soil biota are lacking. The present study explores the potential of microplastics to disturb vital relationships between soil and water, as well as its consequences for soil structure and microbial function. During a 5-weeks garden experiment we exposed a loamy sand soil to environmentally relevant nominal concentrations (up to 2%) of four common microplastic types (polyacrylic fibers, polyamide beads, polyester fibers, and polyethylene fragments). Then, we measured bulk density, water holding capacity, hydraulic conductivity, soil aggregation, and microbial activity. Microplastics affected the bulk density, water holding capacity, and the functional relationship between the microbial activity and water stable aggregates. The effects are underestimated if idiosyncrasies of particle type and concentrations are neglected, suggesting that purely qualitative environmental microplastic data might be of limited value for the assessment of effects in soil. If extended to other soils and plastic types, the processes unravelled here suggest that microplastics are relevant long-term anthropogenic stressors and drivers of global change in terrestrial ecosystems. KW - Mikroplastik KW - Einfluß KW - Boden PY - 2018 DO - https://doi.org/10.1021/acs.est.8b02212 SN - 0013-936X SN - 1520-5851 VL - 52 IS - 17 SP - 9656 EP - 9665 PB - American Chemical Society AN - OPUS4-46547 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Nehls, Irene A1 - Schallschmidt, Kristin A1 - Becker, Roland A1 - Fischer-Tenhagen, C. A1 - Johnen, D. A1 - Leschber, G. A1 - Frese, S. A1 - Neudecker, J. A1 - Walles, T. ED - Schüler, C. ED - Püschel, K. T1 - BIOAIR - Ein interdisziplinäres Projekt zur Bestimmung von Krebsmarkern in der Atemluft N2 - Wie viele Forschergruppen, haben auch wir uns das langfristige Ziel gesetzt, einen Beitrag bei der Beantwortung der Frage zu leisten, was Hunde riechen, wenn sie Krebs erschnüffeln. Dabei sollen die Hunde nicht nur anzeigen, ob eine Atemluftprobe positiv oder negativ ist, sondern sie sollen auch aktiv eingebunden werden in den systematischen Suchprozess nach detektierbaren Biomarkern. So ist geplant, dass mittels eines präparativen Fraktionssammlers definierte Schnitte des Gaschromatogramms einzeln oder in möglichen Kombinationen auf das Adsorbervlies gebracht werden, um im Hundetraining eingesetzt zu werden. In analoger Weise könnte auch mit spezifischen Kandidatensubstanzen verfahren werden. PY - 2015 SN - 978-3-8300-8763-2 N1 - Serientitel: Forschungsergebnisse aus dem Institut für Rechtsmedizin der Universität Hamburg – Series title: Forschungsergebnisse aus dem Institut für Rechtsmedizin der Universität Hamburg VL - 30 SP - 93 EP - 101 PB - Dr. Kovac AN - OPUS4-33165 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Vogl, Jochen A1 - Meyer, Christian A1 - Koenig, Maren A1 - Becker, Dorit A1 - Noordmann, J. A1 - Rienitz, O. A1 - Mamakos, A. A1 - Riccobono, F. T1 - A new two-stage separation procedure for the IDMS based quantification of low Pd and Pt amounts in automotive exhaust emissions N2 - A two-step separation procedure for the quantification of Pd and Pt in automotive exhaust emissions using isotope dilution mass spectrometry was established using a combination of cation and anion exchange chemistry. AG 50W-X12 was used as cation exchange resin and DGA as weakly basic anion exchange resin. This procedure enabled the effective separation of Pd and Pt from the matrix and from interfering elements. Additionally Pd and Pt were collected in separate chromatographic fractions, which increased the precision of the isotope ratio determination by separate measurements using single collector sector field ICPMS. The analytical procedure was validated by analysing the synthetically prepared samples and the certified reference materials BCR-723 (road dust) and IAEA-450 (algae). For the SI-traceable results complete uncertainty budgets were calculated yielding relatively expanded uncertainties (k = 2) of ≈1% for analyte masses in the ng range. Procedure blanks of 55 pg Pd and 3 pg Pt were obtained. The detection limits were calculated as 12 pg for Pd and 7 pg for Pt. Additionally, Pd and Pt blank levels of different filter materials are presented as well as the first results for automotive exhaust particles collected on cellulose filters. KW - Palladium KW - Platinum KW - Automotive exhaust emissions KW - IDMS PY - 2015 DO - https://doi.org/10.1039/c4ja00251b SN - 0267-9477 SN - 1364-5544 VL - 30 IS - 2 SP - 479 EP - 486 PB - Royal Society of Chemistry CY - London AN - OPUS4-32539 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ammann, Dominic A1 - Becker, Roland A1 - Kohl, Anka A1 - Hänisch, Jessica A1 - Nehls, Irene T1 - Degradation of the ethyl glucuronide content in hair by hydrogen peroxide and a non-destructive assay for oxidative hair treatment using infra-red spectroscopy N2 - The assessment of quantification results of the alcohol abuse marker ethyl glucuronide (EtG) in hair in comparison to the cut-off values for the drinking behavior may be complicated by cosmetic hair bleaching. Thus, the impact of increasing exposure to hydrogen peroxide on the EtG content of hair was investigated. Simultaneously, the change of absorbance in the range of 1000–1100 cm-1 indicative for the oxidation of cystine was investigated non-destructively by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) using pulverized portions of the respective hair samples. Hair samples treated with hydrogen peroxide consistently displayed a significantly increased absorbance at 1040 cm-1 associated with the formation of cysteic acid. The EtG content decreased significantly if the hair was treated with alkaline hydrogen peroxide as during cosmetic bleaching. It could be shown that ATR-FTIR is capable of detecting an exposure to hydrogen peroxide when still no brightening was visible and already before the EtG content deteriorated significantly. Thus, hair samples suspected of having been exposed to oxidative treatment may be checked non-destructively by a readily available technique. This assay is also possible retrospectively after EtG extraction and using archived samples. KW - Hair testing KW - Oxidation KW - Bleaching KW - Cysteic acid KW - HPLC–MS/MS PY - 2014 DO - https://doi.org/10.1016/j.forsciint.2014.07.029 SN - 0379-0738 SN - 1872-6283 VL - 244 SP - 30 EP - 35 PB - Elsevier CY - Amsterdam [u.a.] AN - OPUS4-31755 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Roland A1 - Dorgerloh, Ute A1 - Sauer, Andreas A1 - Hofmann, Andrea T1 - Quality control in extended measurement campaigns: selection of contract laboratories by proficiency testing exemplified for the trace analysis of anilines in groundwater N2 - An interlaboratory comparison for the determination of aniline, nine methylated anilines and chlorinated anilines in contaminated groundwater (each compound between 1 µg L-1 and 750 µg L-1) was conducted as proficiency test for the selection of contract laboratories for a groundwater monitoring campaign. For the 13 participants, two different test sample series were prepared from a stabilized real case groundwater. Series A was the groundwater as sampled in the field and series B was prepared from series A by spiking with selected anilines. Homogeneity and stability investigations revealed that contaminated groundwater provides a viable basis for the preparation of ring test samples for the determination of anilines. Analytical procedures were limited to the standardized liquid–liquid extraction or solid-phase extraction in combination with gas chromatography/mass spectrometry (DIN 38407-16:1999). The robust consensus values were evaluated according to the standardized protocol of DIN 38402-45:2013. Robust reproducibility standard deviations ranged largely between 20?% and 60?% depending on the analyte. The proficiency assessment of individual participants combined the qualitative aspect of correct peak identification with the quantitative determination of individual concentrations within set limits in a unified approach. It could be shown that the accreditation status of laboratory and the existence of a standardized analytical procedure do not substitute a problem-related proficiency assessment of potential contractors. KW - Aniline KW - Chloroanilines KW - Methylanilines KW - Groundwater KW - Interlaboratory comparison KW - Proficiency test PY - 2014 DO - https://doi.org/10.1007/s00769-014-1072-5 SN - 0949-1775 SN - 1432-0517 N1 - Geburtsname von Sauer, Andreas: Buchholz, A. - Birth name of Sauer, Andreas: Buchholz, A. VL - 19 IS - 5 SP - 371 EP - 376 PB - Springer CY - Berlin AN - OPUS4-31756 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Ben A1 - Schönfelder, Thorsten T1 - Statistical Assessment of Sample Test Results T2 - Workshop on Statistical Safety Assessment of Composite Cylinders CY - BAM Berlin DA - 2014-11-17 PY - 2014 AN - OPUS4-32205 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Roland T1 - Chemische Analytik in der Forensik: Der Alkoholkonsummarker Ethylglucuronid T2 - ANAKON 2015 CY - Graz (Österreich) DA - 2015-03-23 PY - 2015 AN - OPUS4-32828 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Gerhard Wilhelm T1 - O que pensa a Alemanha da normalizacao (Wie funktioniert die deutsche Normierung) PY - 1981 IS - 9 SP - 21,22,24 PB - Aranda CY - Sao Paulo, Brazil AN - OPUS4-33240 LA - por AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, T. A1 - Weisbrich, S. A1 - Wu, Cheng-Chieh A1 - Neitzel, F. ED - Breunig, M. ED - Al-Doori, M. ED - Butwilowski, E. ED - Kuper, P.V. ED - Benner, J. ED - Haefele, K.H. T1 - Advances in structural monitoring by an integrated analysis of sensor measurements and 3D building model N2 - The use of open GIS standards offers a broad variety of potential, particularly in the field of data exchange, data storage, and interoperability. GML and CityGML are excellent examples for the ontological description of real world objects by means of an open standard whereas SensorML serves to describe measurements, sensors and measuring platforms. The use of such standards offers not only the possibility of using a common standardised language, but also the use of open service standards. The combination of spatial data and sensor standards in services and service-oriented architectures goes far beyond previous existing solutions on the market and provides a novel platform for monitoring structures. That in fact is far more than a simple data storage model. The methods and models presented in this contribution allow a direct integration of sensor data and its provision through an open standard language. In this case, all the intermediate steps at any time through an open service interface are addressed and may be made available and provided to different actors and stakeholders participating in a construction scenario. The great potential and the added value of such an information system is the permanent availability of measurement and object data and an associated integrated analysis of sensor data in combination with a finite element model (FEM). The automatic derivation of a finite element model from the 3D structure model, the visualisation of FEM, the provision of raw (measurement) data and sensor information for each time of measurement transform the platform into a universal tool in the field of structural monitoring. This contribution introduces the individual components, the standards used and the interaction between the components to an overall system. KW - Structural monitoring KW - SensorML KW - Finite element method KW - Integrated analysis KW - City model KW - Building model PY - 2015 SN - 978-3-319-12180-2 SN - 978-3-319-12181-9 DO - https://doi.org/10.1007/978-3-319-12181-9_9 SN - 1863-2246 SN - 1863-2351 N1 - Serientitel: Lecture notes in geoinformation and cartography (LNG&C) – Series title: Lecture notes in geoinformation and cartography (LNG&C) SP - 141 EP - 156 PB - Springer AN - OPUS4-32736 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Gerhard Wilhelm T1 - Technischer Fortschritt - An allem schuld PY - 1981 SP - 20 EP - 21 PB - Dt. Inst.-Verl. CY - Köln AN - OPUS4-31650 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Gerhard Wilhelm T1 - Im Vordergrund stehen Probleme der Energiesicherung - Prüfungen tragen zur öffentlichen Sicherheit und Ordnung bei PY - 1981 SN - 0042-1758 VL - 35 IS - 22 SP - 32 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-31652 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Gerhard Wilhelm T1 - Wirkungen des Fortschritts sachlich bewerten PY - 1981 SN - 0042-1758 VL - 35 IS - Jubiläums-Sondernummer 2. Juni SP - 1 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-31653 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Gerhard Wilhelm T1 - Ansprache T2 - Deutscher Ingenieurtag CY - Berlin, Germany DA - 1981-01-01 PY - 1981 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 400 SP - 15 EP - 17 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-31655 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Gerhard Wilhelm T1 - Einführungsreferat T2 - Konferenz Normenpraxis CY - Berlin, Germany DA - 1981-07-02 PY - 1981 SP - 3 EP - 5 PB - Beuth CY - Berlin AN - OPUS4-31659 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Gerhard Wilhelm T1 - Brasilien will führende Industrienation werden PY - 1981 SN - 0042-1758 VL - 35 IS - 50 SP - 20 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-31660 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Gerhard Wilhelm A1 - Ruske, Walter T1 - Bundesanstalt für Materialprüfung (BAM), Berlin PY - 1981 SN - 0340-3726 VL - 1980-82 SP - 114 EP - 115 CY - Frankfurt, M. AN - OPUS4-31661 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Ben T1 - Step by step assessment of slow burst test results T2 - Probabilistic Safety Assessment of Composite Cylinders CY - BAM, Berlin DA - 2015-01-13 PY - 2015 AN - OPUS4-32455 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Ben T1 - Basics of statistic T2 - Probabilistic Safety Assessment of Composite Cylinders CY - BAM, Berlin DA - 2015-01-13 PY - 2015 AN - OPUS4-32456 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, T. T1 - Neue Möglichkeiten in der Bauwerksüberwachung durch eine integrierte Analyse von Sensormessungen und 3D-Bauwerksmodell T2 - 34. Wissenschaftlich-Technische Jahrestagung der DGPF; 62. Deutscher Kartographentag der DGfK; Geoinformatik 2014 der GfGl und des GIN CY - Hamburg, Germany DA - 2014-03-26 PY - 2014 AN - OPUS4-31375 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Roland T1 - Degradation of Ethyl glucuronide by hydrogen peroxide and a non-destructive assay for oxidative hair treatment using infra-red spectroscopy T2 - 19th Meeting of the Society of Hair Testing CY - Bordeaux, France DA - 2014-06-11 PY - 2014 AN - OPUS4-30747 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mönch, Bettina A1 - Becker, Roland A1 - Nehls, Irene T1 - Determination of ethyl glucuronide in hair: a rapid sample pretreatment involving simultaneous milling and extraction N2 - A combination of simultaneous milling and extraction known as micropulverized extraction was developed for the quantification of the alcohol marker ethyl glucuronide (EtG) in hair samples using a homogeneous reference material and a mixer mill. Best extraction results from 50 mg of hair were obtained with 2-mL plastic tubes containing two steel balls (Ø = 5 mm), 0.5 mL of water and with an oscillating frequency of 30 s-1 over a period of 30 min. EtG was quantified employing a validated GC-MS procedure involving derivatization with pentafluoropropionic acid anhydride. This micropulverization procedure was compared with dry milling followed by separate aqueous extraction and with aqueous extraction after manual cutting to millimeter-size snippets. Micropulverization yielded 28.0±1.70 pg/mg and was seen to be superior to manually cutting (23.0±0.83 pg/mg) and equivalent to dry grinding (27.7±1.71 pg/mg) with regard to completeness of EtG extraction. The option to process up to 20 samples simultaneously makes micropulverization especially valuable for the high throughput of urgent samples. KW - Ethyl glucuronide KW - Hair KW - Micropulverized extraction KW - GC-MS PY - 2014 DO - https://doi.org/10.1007/s00414-013-0939-z SN - 0937-9827 SN - 1437-1596 VL - 128 IS - 1 SP - 69 EP - 72 PB - Springer CY - Berlin ; Heidelberg AN - OPUS4-30063 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Scharkoi, O. A1 - Becker, Roland A1 - Esslinger, Susanne A1 - Weber, M. A1 - Nehls, Irene T1 - Predicting sites of cytochrome P450-mediated hydroxylation applied to CYP3A4 and hexabromocyclododecane N2 - This article describes a simple and quick in silico method for the prediction of cytochrome P450 (CYP)-mediated hydroxylation of drug-like compounds. Testosterone and progesterone, two known substrates of CYP3A4, are used to test the method. Further, we apply the procedure to predict sites of hydroxylation of isomers of the flame retardant hexabromocyclododecane by CYP3A4. Within the method, the compound is rotated in the binding pocket of the cytochrome, so that each hydrogen under consideration is placed near the active centre. Afterwards, short molecular dynamics simulations are provided for each step of the rotation. All steps of the simulation are compared concerning the distances between the hydrogens and the active centre and the corresponding energies. The computational results correlate well with experimental results. KW - Predicting sites of metabolism KW - Cytochrome P450 KW - Hydroxylation KW - Metabolism of HBCD PY - 2015 DO - https://doi.org/10.1080/08927022.2014.898845 SN - 0892-7022 SN - 1029-0435 VL - 41 IS - 7 SP - 538 EP - 546 PB - Gordon and Breach CY - New York, NY AN - OPUS4-30492 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dorgerloh, Ute A1 - Theißen, H. A1 - Becker, Roland A1 - Nehls, Irene T1 - Das Problem löst sich von selbst: Stabilisierung von Grundwasserproben zur Bestimmung organischer Inhaltsstoffe N2 - Als Folge der industriellen Produktion und der vielfältigen industriellen Nutzung von organischen Lösungsmitteln sind eine Vielzahl von Edukten, Zwischen- und Endprodukten in die Umwelt eingetragen worden und führen zu massiven Verunreinigungen des Bodens und des Grundwassers. Die Untersuchung und Sanierung des Grundwassers stellt einen aktuellen Schwerpunkt in der Altlastenbearbeitung dar. Vielfach werden klassische pump & treat-Verfahren zur Grundwassersanierung verwendet. Diese aktiven Sicherungs- und Sanierungsmaßnahmen werden jedoch unter dem Gesichtspunkt der Verhältnismäßigkeit häufig als ineffizient eingeschätzt. Als Alternative sollen die natürlichen Abbauprozesse im Grundwasserleiter genutzt oder gezielt verstärkt werden, um auf diesem Weg eine in-situ-Sanierung des Grundwasserleiters zu erreichen. In den letzten Jahren haben sich verschiedene Sanierungsverfahren etabliert, bei denen durch die Zugabe von Hilfsstoffen die mikrobiologische Aktivität des Aquifers erhöht wird bzw. Stoffe zugeführt werden, die mit den Schadstoffen reagieren (in-situ chemische Oxidation bzw. Reduktion, ISCO). An ausgewählten Standorten ist auch die aktive Sanierung (pump & treat, on-site- Sanierung) mit biologischem Schadstoffabbau (Bio-Filter) kombiniert worden. Um den Sanierungsverlauf zu verfolgen und zu optimieren, ist die Beprobung von Grundwasser aus dem Grundwasserleiter oder aus laufenden Anlagen erforderlich. In Fällen der gesteigerten mikrobiologischen Aktivität des Grundwassers treten gehäuft Probleme bei der Stabilisierung der Wasserproben auf. Die forcierten Abbauprozesse der Schadstoffe gehen nach der Probenahme in der Probenflasche weiter, bis die Energiebasis der Mikrobiologie aufgebraucht ist. Durch eine geringe Temperaturerhöhung beschleunigen sich diese Prozesse zusätzlich. In der Folge können die Schadstoffgehalte teilweise innerhalb weniger Stunden stark reduziert werden. Im Analysenlabor wird dann ein Schadstoffgehalt nachgewiesen, der nicht mehr die Verhältnisse im Aquifer bzw. im Ablauf der Reinigungsstufen widerspiegelt. Eine Einschätzung des Sanierungsfortschritts oder der Reinigungsleistung ist unter diesen Bedingungen stark fehlerbehaftet und kann zu groben Fehlinterpretationen führen. Grundwasserproben, die einem Aquifer mit hoher natürlicher oder initiierter mikrobiologischer Abbauaktivität entstammen, müssen daher zusätzlich stabilisiert werden, um den Ist-Zustand zum Zeitpunkt der Probenahme zu erfassen. Die Konservierung von Wasserproben bei der Probenahme von Grundwasser ist in der Normung umfangreich beschrieben: Die EN ISO 5667-3 von 2004 ist im Normausschuss (NA 119-01-03-01-01) überarbeitet und 2012 als Norm verabschiedet worden (EN ISO 5667-3, 03.12, deutsche Fassung DIN EN ISO 5667-3, 03-2013) [1], In Einzelfällen hat sie sich nicht als ausreichend erwiesen, um die Stabilität der organischen Schadstoffe in den oben beschriebenen Wasserproben zu gewährleisten. T2 - Altlastensymposium 2014 CY - Fulda, Germany DA - 20.03.2014 KW - Grundwasser KW - In-situ-Sanierung KW - Probenahme KW - Stabilisierung PY - 2014 SP - 76 EP - 85 AN - OPUS4-30480 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Axel A1 - Becker, Roland A1 - Braun, Ulrike A1 - Dorgerloh, Ute T1 - Einfluss der Alterung auf das Sorptionsverhalten von Mikroplastik, eine Laborstudie mit BTEX und Etherverbindungen N2 - Die Präsenz von Mikroplastik in aquatischen Ökosystemen ist ein globales Problem und steht zunehmend im Fokus der Öffentlichkeit. In mehreren Studien konnten Anreicherungen hydrophober, organischer Schadstoffe an MP nachgewiesen werden. Der Einfluss des Alterungszustandes der MP-Partikel auf das Sorptionsverhalten von hydrophoben organischen Substanzen ist nicht hinreichend geklärt. Ziel der vorliegenden Arbeit war die Untersuchung des Sorptionsverhaltens von Schadstoffen mit Bedeutung für limnische Gewässer an künstlich gealterten Partikeln relevanter Polymere. Das Modell verwendete die Aromaten Benzol, Toluol, Ethylbenzol und Xylol (BTEX) sowie Etherverbindungen. Diese Substanzen sind oder waren Bestandteile in unterschiedlichen Kraftstoffen und finden sich daher in vielen aquatischen Ökosystemen weltweit. Als Sorbentien kamen teilkristallines Polypropylen (PP) und amorphes Polystyrol (PS) in Form von Industriepellets zum Einsatz. Die Pellets wurden jeweils sowohl unbehandelt als auch mittels UV-Bestrahlung künstlich gealtert verwendet und mikroskopisch sowie mittels XPS, FTIR und DSC charakterisiert. Die Alterung führte bei PS zu einer verringerten Sorptionskapazität, während bei PP keine Veränderung im Sorptionsverhalten beobachtet wurde. T2 - Wasser 2017 - Jahrestagung der Wasserchemischen Gesellschaft CY - Donaueschingen, Germany DA - 22.05.2017 KW - Mikroplastik KW - Organische Schadstoffe KW - Sorption KW - Polypropylen Polystyrol PY - 2017 SN - 978-3-947197-01-9 SP - 1 EP - 606 PB - Gesellschaft Dt. Chemiker AN - OPUS4-40447 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sauer, Andreas A1 - Scharf, Holger A1 - Becker, Roland T1 - Bericht zum 22. BAM-Ringversuch "Altlasten" N2 - Präsentation der Ergebnisse eines Ringversuchs zur Kompetenzbewertung von Prüflaboratorien auf dem Gebiet der anorganischen und organischen Bodenanalytik: Polyzyklische aromatische Kohlenwasserstoffe (PAK) in Boden, Mineralölkohlenwasserstoffe (MKW) in Boden, Elemente in Sediment und Gesamtcyanid in Boden. KW - Eignungsprüfung KW - Boden KW - Spurenelemente KW - Gesamtcyanid KW - MKW KW - PAK PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-398676 SP - 1 EP - 261 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-39867 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Vogl, Jochen A1 - Becker, Dorit A1 - Koenig, Maren A1 - Yim, Y.-H. A1 - Lee, K.-S. A1 - Goenaga-Infante, H. A1 - Malinowskiy, D. A1 - Hill, S. A1 - Ren, T. A1 - Wang, J. A1 - Vocke, R. D. A1 - Murphy, K. A1 - Nonose, N. A1 - Rienitz, O. A1 - Noordmann, J. T1 - Certification Report for the Isotopic Reference Materials ERM-AE142 and ERM-EB400 N2 - Lead (Pb) isotope amount ratios are commonly used in applications ranging from archaeology and forensic sciences to terrestrial and extra-terrestrial geochemistry. Despite their utility and frequency of use, only three certified isotope amount ratio reference materials are currently available for Pb: NIST SRMs 981, 982 and 983. Because SRM 981 has a natural Pb isotopic composition, it is mainly used for correcting instrumental mass discrimination or fractionation. This means that, at present, there are no other certified isotope reference materials with natural Pb isotopic composition that could be used for validating or verifying an analytical procedure involving the measurement of Pb isotope amount ratios. To fill this gap, two new reference materials, both certified for their Pb isotopic composition, have been produced together with a complete uncertainty assessment. These new reference materials offer SI traceability and an independent means of validating or verifying analytical procedures used to produce Pb isotope amount ratio measurements. ERM-EB400 is a bronze material containing a nominal Pb mass fraction of 45 mg/kg. ERM-AE142 is a high purity solution of Pb with a nominal mass fraction of 100 mg/kg. Both materials have been specifically produced to assist analysts in verifying or validating their analytical procedures. Note that while one of these reference materials requires the chemical separation of Pb from its matrix (ERM-EB400), the other does not (ERM-AE142). Details on the certification of these isotope reference materials are provided in this report. KW - Lead isotopic composition KW - Isotope ratio KW - Reference material KW - Mass spectrometry PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-392060 SP - 1 EP - 16 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-39206 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -