TY - GEN A1 - Bauer, R. A1 - Pham, M. A1 - Becker, T. A1 - Melzer, Michael A1 - Pelkner, Matthias A1 - Böhle, B. A1 - op den Winkel, F. A1 - Kliche, K. A1 - Welker, F. A1 - Becker, P. A1 - Pfeffer, A. A1 - Gerber, J. A1 - Holzhey, R. A1 - Wenzel, B. A1 - Slatter, R. A1 - Grönefeld, M. A1 - Nasaruk, M. A1 - Buß, R. A1 - Hille, P. A1 - Bartos, A. A1 - Schreiner, I. T1 - Anforderungen an die technische Darstellung von magnetischen Maßverkörperungen in Konstruktionszeichnungen N2 - Dieses Dokument legt Anforderungen an die technische Darstellung von Geometrie und magnetischen Eigenschaften in Konstruktionszeichnungen von magnetischen Maßverkörperungen fest und definiert die dazu notwendige Terminologie. KW - Magnetische Maßverkörperungen KW - Konstruktionszeichnungen KW - Terminologie KW - Magnetische Messsysteme PY - 2022 DO - https://doi.org/10.31030/3359425 IS - DIN SPEC 91411:2022-08 SP - 1 EP - 48 PB - Beuth CY - Berlin AN - OPUS4-56631 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, S. A1 - Beckmann, Jörg A1 - Braun, M.-T. A1 - Cojocari, O. A1 - Feige, V. A1 - Fischer, B. A1 - Friederich, F. A1 - Globisch, B. A1 - Hechtfischer, G. A1 - Hens, K. A1 - Hübers, H.-W. A1 - Jelonnek, J. A1 - Jonuscheit, J. A1 - Keil, A. A1 - Kleine-Ostmann, T. A1 - Marquardt, E. A1 - Mayr, M. A1 - Nickel, H.-U. A1 - Nüßler, D. A1 - Peichl, M. A1 - Peters, O. A1 - Schür, J. A1 - Sprenger, T. A1 - Steiger, A. A1 - van Frank, S. A1 - Vieweg, N. A1 - Wilk, R. ED - Jonuscheit, J. ED - Marquardt, E. T1 - Terahertzsysteme und Anwendungsfelder N2 - Der Frequenzbereich der Terahertzwellen liegt im elektromagnetischen Spektrum zwischen den Mikrowellen und dem infraroten Licht – also etwa im Bereich von 0,1 bis 10 Terahertz (THz). Der VDI-Statusreport „Terahertzsysteme und Anwendungen“ stellt die unterschiedlichen Konzepte für Terahertzsysteme vor und zeigt Anwendungsbeispiele, bei denen die Terahertztechnik erfolgreich eingesetzt wird. Umfangreiche Literaturangaben ermöglichen eine intensivere Beschäftigung mit allen Themen des VDI-Statusreports. KW - Terahertzsysteme PY - 2020 UR - https://www.vdi.de/ueber-uns/presse/publikationen/details/terahertzsysteme-und-anwendungsfelder SP - 1 EP - 44 PB - Verein Deutscher Ingenieure (VDI) CY - Düsseldorf AN - OPUS4-50556 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hampel, U. A1 - Schütze, A. A1 - Rädle, M. A1 - Rück, T. A1 - Krawczyk-Becker, M. A1 - Musch, T. A1 - Maiwald, Michael A1 - Fröhlich, H. J. A1 - Zeck, S. T1 - Positionspapier Sensorik für die Digitalisierung chemischer Produktionsanlagen N2 - Die chemische Industrie steht derzeit, wie viele andere Industriebereiche, vor den Herausforderungen einer Digitalisierung der Produktion. Sie ist der Schlüssel für die Flexibilisierung von Prozessen und Anlagen, für die Verkürzung von Produkteinführungszeiten sowie für den Zuschnitt der Produktion auf wechselnde Nachfrage und kürzere Produktlebenszyklen. Die Messtechnik und Sensorik spielt neben der intelligenten Datenverarbeitung eine Schlüsselrolle für die Digitalisierung. Flexiblere Anlagen benötigen Sensorik zur Überwachung des Anlagenzustandes, zur Früherkennung nicht bestimmungsgemäßer Betriebszustände sowie für eine bedarfsgerechte Wartung. Da die Entwicklung neuer und verbesserter Messtechnik und Sensorik grundlegend aus verschiedenen Richtungen gedacht werden muss, haben sich Akteure aus verschiedenen Branchen zusammengetan und dieses Positionspapier erstellt. Es basiert auf einer grundlegenden Analyse des Ist-Stands sowie des Bedarfs der Industrie, die unter anderem auf einem eigens dafür durchgeführten Workshop mit Sensorentwicklern, Anlagenherstellern sowie Anlagenbetreibern am 18. Juni 2019 bei der DECHEMA in Frankfurt a. M. diskutiert wurden. Diese Aktivitäten wurden maßgeblich von der Initiative Wanted Technologies der ProcessNet sowie dem AMA Verband für Sensorik und Messtechnik e.V. initiiert. KW - Prozessindustrie KW - Smarte Sensoren KW - Prozessanalytik KW - DECHEMA KW - Positionspapier PY - 2020 UR - https://dechema.de/Sensorik SP - 1 EP - 20 PB - DECHEMA CY - Frankfurt am Main AN - OPUS4-50403 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sauer, Andreas A1 - Scharf, Holger A1 - Becker, Roland T1 - Bericht zum 21. BAM-Ringversuch "Altlasten" N2 - Präsentation der Ergebnisse eines Ringversuchs zur Kompetenzbewertung von Prüflaboratorien auf dem Gebiet der anorganischen und organischen Bodenanalytik. KW - Eignungsprüfung KW - Boden KW - PAK KW - MKW KW - Spurenelemente KW - Gesamtcyanid KW - Proficiency testing KW - Soil KW - PAH KW - TPH KW - Trace elements KW - Total cyanide PY - 2015 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-355586 SP - 1 EP - 234 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-35558 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Vogl, Jochen A1 - Becker, Dorit A1 - Koenig, Maren A1 - Rosner, M. T1 - Certification report for the reference materials ERM-AE102a, -AE104a, -AE120, -AE121 and -AE122 N2 - Isotope reference materials are essential to enable reliable and comparable isotope data. Besides the correction of mass fractionation or mass discrimination isotope reference materials are indispensible for validation and quality control of analytical procedures. This article describes the production and certification of a set of five isotope reference materials ERM-AE102a, 104a, AE120, 121 and 122, for boron isotope analysis. The isotopic composition of all materials has been adjusted by mixing boron mother solutions enriched in 10B or 11B with a boron mother solution having natural-like isotopic composition under full gravimetric control. All mother solutions have been analysed for their boron mass fraction as well as their boron isotopic composition by TIMS using IDMS as calibration technique. For all five reference materials the isotopic composition obtained on the basis of the gravimetric data agrees very well with the isotopic composition obtained from different TIMS techniques. Performed stability and homogeneity studies show no significant influence on the isotopic composition as well as on the related uncertainties. The certified isotope abundances for 10B are 0.29995 (27) for ERM-AE102a and 0.31488 (28) for ERM-AE104a. The certified δ11B values are -20.2 (6) ‰ for ERM-AE120, 19.9(6) ‰ for ERM-AE121 and 39.7 (6) ‰ for ERM-AE122. Together with the formerly certified ERM-AE101 and -AE103 a unique set of seven certified reference materials (CRM) for boron isotope analysis is now available from BAM. KW - Boron KW - Delta value KW - Isotope ratio KW - ICPMS KW - TIMS PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-355813 SP - 1 EP - 24 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-35581 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Vogl, Jochen A1 - Becker, Dorit A1 - Koenig, Maren T1 - Certification report for the reference materials ERM-AE123 and ERM-AE124 - Certified for their boron isotope composition N2 - Isotope reference materials are essential to enable reliable and comparable isotope data. Besides the correction of mass fractionation or mass discrimination, isotope reference materials are indispensible for validation and quality control of analytical procedures. This report describes the production and certification of two isotope reference materials, ERM-AE123 and ERM-AE124, for boron isotope analysis. The isotopic composition of ERM-AE123 is the unaltered natural-like isotopic composition of the base material. The isotopic composition of ERM-AE124 has been adjusted by mixing two boron stock solutions enriched in 10B and 11B respectively under full gravimetric control. All stock solutions have been prepared fully under gravimetrical control. The corresponding boron isotopic composition has been analysed by TIMS. For both reference materials the isotopic composition obtained on the basis of the gravimetric data agrees very well with the isotopic composition obtained by TIMS. The certified isotope abundances for 10B are 0.19832 (21) for ERM-AE123 and 0.96006 (6) for ERM-AE124. Together with the formerly certified ERM-AE101, -AE102a, -AE103, -AE104a, -AE120, -AE121 and AE122, a unique set of nine certified reference materials (CRM) for boron isotope analysis is now available from BAM covering a range for the 10B isotope amount fraction from 0.2 to 0.96 and for the δ11B value from -20 ‰ to +40 ‰. KW - boron KW - isotope ratio KW - enriched isotope KW - ICPMS KW - TIMs PY - 2013 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-355826 SP - 1 EP - 17 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-35582 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Vogl, Jochen A1 - Becker, Dorit A1 - Koenig, Maren A1 - Rienitz, O. A1 - Noordmann, J. T1 - Certification report for the reference materials ERM-AE140 and ERM-AE141 - Pd and Pt single spikes certified for their Pd and Pt mass fraction and isotopic composition N2 - Isotope dilution mass spectrometry often is applied for the quantification of platinum group elements in environmental and geological samples. In most cases, however, certified spike solutions offering complete uncertainty statements and SI-traceability are missing. This report describes the production and certification of two isotope reference materials, ERM-AE140 and ERM-AE141, serving as calibrated spike solutions for IDMS based quantification of Pd and Pt, respectively. Both materials were produced by dissolving highly enriched isotopes 106Pd and 194Pt and determining the mass fraction of 106Pd and 194Pt in the final solution by reverse IDMS. Two independent back-spikes were produced for each material from high purity Pd and Pt. Characterization measurements were carried out by MC-ICPMS. For ERM-AE140 the certified mass fractions are w(106Pd) = 20.24(5) mg/kg and w(Pd) = 20.54(5) mg/kg. For ERM-AE141 the certified mass fractions are w(194Pt) = 18.18(11) mg/kg and w(Pt) = 19.90(12) mg/kg. These values are traceable to the International System of Units (SI) in the shortest possible way. KW - Palladium KW - Enriched isotope KW - Platinum KW - Spike KW - IDMS PY - 2015 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-355833 SP - 1 EP - 25 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-35583 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Vogl, Jochen A1 - Becker, Dorit A1 - Janisch, N. A1 - Klingbeil, P. A1 - Ludwig, H. P. A1 - Riebe, G. A1 - Pritzkow, W. A1 - Wermann, G. T1 - Zertifizierungsbericht für ERM-AE101 (auch BAM-I001), ERM-AE102 (auch BAM-I002) und ERM-AE103 (auch BAM-I003) N2 - Dieser Bericht beschreibt die Zertifizierung von 3 synthetischen Isotopenmischungen aus natürlicher und angereicherter Borsäure. Diese Isotopen-ZRM liegen als konzentrierte, wäs-serige Borsäure-Lösungen vor und sind bezüglich ihrer Isotopenzusammensetzung zertifi¬ziert. Der Bor-Gesamtgehalt ist als Richtwert angegeben. Die Unsicherheiten sind erweiterte Messunsicherheiten mit k=2. Sie sind in Klammern angegeben und beziehen sich auf die letzten beiden Stellen. Die vorliegenden Isotopen-ZRM sind bezüglich ihrer Isotopenzu¬sam-mensetzung mit erweiterten relativen Messunsicherheiten kleiner 0,12% zertifiziert. Die ab-solute, kombinierte Standardunsicherheit des prozentualen Stoffmengenanteils der Isotope (Isotopenhäufigkeit) liegt zwischen 0.012 und 0.017. KW - Isotope KW - Bor KW - Kernkraftwerke PY - 2009 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-355777 SP - 1 EP - 21 CY - Berlin AN - OPUS4-35577 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Vogl, Jochen A1 - Ostermann, Markus A1 - Becker, Dorit A1 - Janisch, N. T1 - Zertifiziertes Referenzmaterial ERM-AE104 bzw. BAM-I004 N2 - Dieser Bericht beschreibt die Zertifizierung einer synthetischen Isotopenmischung aus natürlicher und angereicherter Borsäure. Dieses Isotopen-ZRM liegt als konzentrierte, wässerige Borsäure-Lösung vor und ist bezüglich ihrer Isotopenzusammensetzung zertifiziert. Der Bor-Gesamtgehalt ist als Richtwert angegeben. Die Unsicherheiten sind erweiterte Messunsicherheiten mit k=2. Sie sind in Klammern angegeben und beziehen sich auf die letzten beiden Stellen. Das vorliegende Isotopen-ZRM ist bezüglich der Isotopenzusammensetzung mit erweiterten relativen Messunsicherheiten kleiner 0,08% zertifiziert. Die absolute, kombinierte Standardmessunsicherheit des prozentualen Stoffmengenanteils der Isotope (Isotopenhäufigkeit) liegt bei 0,014. In diesem Zertifizierungsbericht wird nur auf die Kapitel eingegangen, die abweichend vom bestehenden Zertifizierungsreport für die Referenzmaterialien BAM I001 bis BAM I003 sind und Einfluss auf die Endergebnisse haben. Dabei handelt es sich um die Kapitel 3.3, 3.4, 4, 6, 7 und 8, Die Kapitel 1, 2, 3, 3.1, 3.2, 5, 9 und 10 des alten Zertifizierungsberichts für die Referenzmaterialien BAM I001 bis BAM I003 behalten unverändert ihre Gültigkeit und sind nicht noch einmal aufgeführt worden. KW - Isotope KW - Kernkraftwerk KW - Bor PY - 2009 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-355786 SP - 1 EP - 9 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-35578 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sauer, Andreas A1 - Scharf, Holger A1 - Becker, Roland T1 - Bericht zum 18. BAM-Ringversuch "Altlasten" N2 - Präsentation der Ergebnisse eines Ringversuchs zur Kompetenzbewertung von Prüflaboratorien auf dem Gebiet der anorganischen und organischen Bodenanalytik. KW - Eignungsprüfung KW - Boden KW - MKW KW - PAK KW - Gesamtcyanid KW - Spurenelemente KW - Proficiency testing KW - Soil KW - TPH KW - PAH KW - Total cyanide KW - Trace elements PY - 2012 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-357399 SP - 1 EP - 226 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-35739 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sauer, Andreas A1 - Scharf, Holger A1 - Becker, Roland T1 - Bericht zum 19. BAM-Ringversuch "Altlasten" N2 - Präsentation der Ergebnisse eines Ringversuchs zur Kompetenzbewertung von Prüflaboratorien auf dem Gebiet der anorganischen und organischen Bodenanalytik. KW - Eignungsprüfung KW - Boden KW - MKW KW - PAK KW - Gesamtcyanid KW - Spurenelemente KW - Proficiency testing KW - Soil KW - TPH KW - PAH KW - Total cyanide KW - Trace elements PY - 2013 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-356963 SP - 1 EP - 233 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-35696 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Sauer, Andreas A1 - Scharf, Holger A1 - Becker, Roland T1 - Bericht zum 20. BAM-Ringversuch "Altlasten" N2 - Präsentation der Ergebnisse eines Ringversuchs zur Kompetenzbewertung von Prüflaboratorien auf dem Gebiet der anorganischen und organischen Bodenanalytik. KW - Eignungsprüfung KW - Boden KW - MKW KW - PAK KW - Spurenelemente KW - Chrom(VI) KW - Proficiency testing KW - Soil KW - TPH KW - PAH KW - Trace elements KW - Chromium(VI) PY - 2014 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-356424 SP - 1 EP - 228 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-35642 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Roland A1 - Dorgerloh, Ute A1 - Paulke, E. A1 - Mumme, J. A1 - Nehls, Irene T1 - Hydrothermal carbonization of biomass: Major organic components of the aqueous phase N2 - Process waters obtained from hydrothermal carbonization (HTC) of wheat straw, a biogas digestate derived thereof, and four woody biomass feedstocks were quantified regarding the total organic carbon (TOC) and selected organic compounds. HTC runs revealed that TOC loads were largely unaffected by process severity or type of feedstock whereas the C2–C6 fatty acids, determined by GC, displayed clear effects of temperature and feedstock. HPLC demonstrated simultaneously the initial increase and subsequent consumption of cellulose-derived furfural and 5-hydroxymethylfurfural as well as the increase of the lignin-derived 2-methoxyphenol. 2-Methylbenzofuran, an example for a substance potentially harmful to aquatic biota, was observed in high concentration in the HTC liquor from wheat straw-based feedstocks. KW - Furfurals KW - Gas chromatography KW - Liquid chromatography KW - Phenols KW - Process water KW - Total organic carbon PY - 2014 DO - https://doi.org/10.1002/ceat.201300401 SN - 0930-7516 SN - 1521-4125 VL - 37 IS - 3 SP - 511 EP - 518 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-30333 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Günther A1 - Gerisch, Wolfgang T1 - Sonnenflecken wirken auf Mensch und Tier PY - 1980 SN - 0376-6829 IS - 228 SP - 71 PB - Neue Zürcher Zeitung CY - Zürich AN - OPUS4-30281 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, R. T1 - Substrate screening with MeCAT - A comparison of strategies for relative protein quantification T2 - DGMS 2014 CY - Frankfurt am Main, Germany DA - 2014-03-02 PY - 2014 AN - OPUS4-30364 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Gerhard Wilhelm T1 - Mechanisches Relaxationsverhalten hochpolymerer Stoffe PY - 1968 SN - 0023-5555 VL - 15 IS - 8 SP - 377 EP - 386 PB - Garrels CY - Hamburg AN - OPUS4-30167 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Gerhard Wilhelm T1 - Der Ingenieur in Wirtschaft und Gesellschaft PY - 1982 IS - 8 SP - 14 EP - 17 CY - Mannheim AN - OPUS4-35977 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, Gerhard Wilhelm ED - Erismann, Theodor H. T1 - Technik und Kunst PY - 1982 SP - 7 EP - 22 CY - Dübendorf AN - OPUS4-35983 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Gerhard Wilhelm T1 - Voraussagen wirken wie Wechselbäder: Informative Aussagen verbessern die berufliche Orientierung PY - 1982 SN - 0042-1758 VL - 36 IS - 37 SP - 38 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-35984 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Gerhard Wilhelm T1 - Wir brauchen mehr Ingenieure als je zuvor PY - 1982 SN - 0723-0923 IS - 11 SP - 23 EP - 26 PB - Krausskopf CY - Mainz AN - OPUS4-35985 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Gerhard Wilhelm T1 - Technik steht an erster Stelle: Deutsch-chinesische Zusammenarbeit basiert auf langer Tradition PY - 1982 SN - 0042-1758 VL - 36 IS - 50 SP - 28 EP - 29 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-35986 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Gerhard Wilhelm A1 - Neider, Rudolf T1 - Scientific and Economic Importance of Reference Materials (RM's) T2 - International Symposium on the Production and Use of Reference Materials CY - Japan DA - 01.01.1982 PY - 1982 SP - 60 EP - 63 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-35987 LA - zho AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Gerhard Wilhelm T1 - Die Umschau im Wandel PY - 1984 SN - 0722-8562 VL - 84 IS - 6 SP - 162 PB - Umschau Verl. Breidenstein CY - Frankfurt am Main AN - OPUS4-36160 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Gerhard Wilhelm T1 - Der Beitrag technisch-wissenschaftlicher Vereine zum Innovationsgeschehen PY - 1984 IS - 17 SP - 44 EP - 55 PB - Dt. Consulting Verl. CY - Wuppertal AN - OPUS4-36161 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Gerhard Wilhelm ED - Biedenkopf, G. T1 - Der Ingenieur in Beruf und Gesellschaft - ein Schwerpunkt der Arbeit des VDI PY - 1983 SP - 13 EP - 22 PB - VDI Verlag CY - Düsseldorf, Germany AN - OPUS4-35964 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Gerhard Wilhelm T1 - Trends neuer Werkstoffe PY - 1983 SN - 0720-9991 VL - 3 SP - 8 EP - 10 CY - Berlin AN - OPUS4-35966 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Gerhard Wilhelm T1 - Die Rolle des Meß-, Normen- und Prüfwesens bei der Wirtschaftsförderung in Entwicklungsländern PY - 1982 SN - 0722-2912 VL - 61 IS - 1 SP - 5 EP - 9 PB - Beuth Verl. CY - Berlin AN - OPUS4-35974 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Gerhard Wilhelm T1 - Professor Dr.-Ing. Max Pfender zum 75. Geburtstag PY - 1982 SN - 0948-1486 VL - 12 IS - 3 SP - 267 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-35976 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bachmann, H. J. A1 - Bucheli, T. D. A1 - Dieguez-Alonso, A. A1 - Fabbri, D. A1 - Knicker, H. A1 - Schmidt, H.-P. A1 - Ulbricht, A. A1 - Becker, Roland A1 - Buscaroli, A. A1 - Buerge, D. A1 - Cross, A. A1 - Dickinson, D. A1 - Enders, A. A1 - Esteves, V.I. A1 - Evangelou, M. W. H. A1 - Fellet, G. A1 - Friedrich, K. A1 - Gasco Guerrero, G. A1 - Glaser, B. A1 - Hanke, U. M. A1 - Hanley, K. A1 - Hilber, I. A1 - Kalderis, D. A1 - Leifeld, J. A1 - Masek, O. A1 - Mumme, J. A1 - Paneque Carmona, M. A1 - Calvelo Pereira, R. A1 - Rees, F. A1 - Rombola, A. G. A1 - de la Rosa, J. M. A1 - Sakrabani, R. A1 - Sohi, S. A1 - Soja, G. A1 - Valagussa, M. A1 - Verheijen, F. A1 - Zehetner, F. T1 - Towards the standardization of biochar analysis: the COST action TD1107 interlaboratory comparison N2 - Biochar produced by pyrolysis of organic residues is increasingly used for soil amendment and many other applications. However, analytical methods for its physical and chemical characterization are yet far from being specifically adapted, optimized, and standardized. Therefore, COST Action TD1107 conducted an interlaboratory comparison in which 22 laboratories from 12 countries analyzed three different types of biochar for 38 physical–chemical parameters (macro- and microelements, heavy metals, polycyclic aromatic hydrocarbons, pH, electrical conductivity, and specific surface area) with their preferential methods. The data were evaluated in detail using professional interlaboratory testing software. Whereas intralaboratory repeatability was generally good or at least acceptable, interlaboratory reproducibility was mostly not (20% < mean reproducibility standard deviation < 460%). This paper contributes to better comparability of biochar data published already and provides recommendations to improve and harmonize specific methods for biochar analysis in the future. KW - Biochar KW - Analysis KW - Standardization KW - Ring test KW - Interlaboratory comparison PY - 2016 DO - https://doi.org/10.1021/acs.jafc.5b05055 SN - 0021-8561 SN - 1520-5118 VL - 64 IS - 2 SP - 513 EP - 527 PB - American Chemical Society CY - Columbus, Ohio AN - OPUS4-35289 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Gerhard Wilhelm T1 - Historical remarks and activities at IWM T2 - International Conference on Application of Fracture Mechanics to Materials and Structures CY - Freiburg, Germany DA - 1983-06-20 PY - 1984 SN - 90-247-2958-0 SP - 17 EP - 28 PB - Nijhoff CY - The Hague AN - OPUS4-33895 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, Gerhard Wilhelm T1 - Werkstoffe, Material- und Werkstoffprüfung PY - 1985 SN - 3-478-53200-0 VL - 10 PB - Verl. Moderne Industrie CY - München AN - OPUS4-33884 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Gerhard Wilhelm T1 - Neue Werkstoffe sichern die industrielle Leistungsfähigkeit PY - 1985 SN - 0042-1758 IS - 11 SP - 15 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-33886 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Roland T1 - Odour reference materials and training concepts for sniffer dogs T2 - International Association of Breath Research Summit 2015 CY - Wien (Österreich) DA - 2015-09-14 PY - 2015 AN - OPUS4-33981 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Roland T1 - Odour reference material and training concepts for sniffer dogs T2 - International Conference on Medical Bio-Detection CY - Cambridge (England) DA - 2015-09-15 PY - 2015 AN - OPUS4-33984 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, T. A1 - Weisbrich, S. A1 - Euteneuer, F. A1 - Wu, Cheng-Chieh A1 - Neitzel, F. T1 - Neue Möglichkeiten in der Bauwerksüberwachung durch integrierte Analyse von Sensormessungen und 3D-Bauwerksmodell N2 - Die Verwendung offener Standards bietet eine Vielzahl von Möglichkeiten, gerade im Bereich des Datenaustausches, Datenlagerung, aber auch der Interoperabilität. GML und CityGML sind hervorragende Beispiele für die Beschreibung von Realweltobjekten mittels eines offenen Standards wohingegen SensorML dazu dient, Messungen, Sensoren und Messplattformen zu beschreiben. Die Verwendung solcher Standards eröffnet dem Nutzer nicht nur die Möglichkeiten der Verwendung einer gemeinsamen standardisierten Sprache, sondern auch die Nutzung von offenen Servicestandards, wie Web Feature Service (WFS), Web Map Service (WMS) oder von Sensor Observation Services (SOS). Die Kombination von Geodaten- und Sensorstandards in einer Dienste- und Servicearchitektur geht über bisherige am Markt existierende Lösungen hinaus und schafft eine neuartige Plattform für die Bauwerksüberwachung, die weit mehr als ein simples Datenhaltungsmodell darstellt. Die in diesem Beitrag vorgestellte Plattform ermöglicht eine direkte Integration von Sensordaten sowie deren Bereitstellung durch eine offene Standardsprache. Dabei sind alle Zwischenschritte jederzeit über eine offene Diensteschnittstelle adressierbar und können so verschiedenen Akteuren zur Verfügung gestellt werden. Das große Potential und der Mehrwert eines derartigen Informationssystems liegt vor allem in der permanenten Verfüg-barkeit von Mess- und Objektdaten und einer damit verbundenen integrierten Analyse der Sensormessdaten in Kombination mit einem Finite-Elemente-Modell (FEM), basierend auf den Objektdaten. Die automatische Ableitung eines FE-Modells aus dem 3D-Bauwerks-modell, die Visualisierung der FEM-Simulationsergebnisse anhand des Bauwerksmodells, die Bereitstellung von Messrohdaten und Sensorinformationen zu jedem Messzeitpunkt machen die Plattform zu einem universell einsetzbaren Werkzeug im Bereich der Bauwerksüberwachung. In diesem Beitrag werden die einzelnen Bausteine, die verwendeten Standards und die Interaktion der einzelnen Komponenten zu einem Gesamtsystem vorgestellt. T2 - 34. Wissenschaftlich-technische Jahrestagung der DGPF CY - Hamburg, Germany DA - 26.03.2014 KW - 3D-Geoinformation KW - CityGML KW - Finite-Elemente-Methode PY - 2014 VL - 23 SP - Paper 254, 1 EP - 10 AN - OPUS4-30619 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Gerhard Wilhelm T1 - Einleitung T2 - Ingenieure für die Zukunft - Technische Intelligenz im Spannungsfeld zwischen Studium und Beruf CY - Düsseldorf, Germany DA - 1980-09-23 PY - 1981 SN - 3-18-400509-7 N1 - Serientitel: Der Ingenieur in Beruf und Gesellschaft – Series title: Der Ingenieur in Beruf und Gesellschaft SP - 1 EP - 3 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-31647 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Gerhard Wilhelm T1 - Ingenieurausbildung und -weiterbildung aus der Sicht des Vereins Deutscher Ingenieure T2 - Ingenieure für die Zukunft - Technische Intelligenz im Spannungsfeld zwischen Studium und Beruf CY - Düsseldorf, Germany DA - 1980-09-23 PY - 1981 SN - 3-18-400509-7 N1 - Serientitel: Der Ingenieur in Beruf und Gesellschaft – Series title: Der Ingenieur in Beruf und Gesellschaft SP - 149 EP - 161 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-31648 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Roland T1 - Non-invasive cancer detection using volatile biomarkers: Is urine superior to breath? N2 - In recent years numerous reports have highlighted the options of chemical breath analysis with regard to noninvasive cancer detection. Certain volatile organic compounds (VOC) supposedly present in higher amounts or in characteristic patterns have been suggested as potential biomarkers. However, so far no clinical application based on a specific set of compounds appears to exist. Numerous reports on the capability of sniffer dogs and sensor arrays or electronic noses to distinguish breath of cancer patients and healthy controls supports the concept of genuine cancer-related volatile profiles. However, the actual compounds responsible for the scent are completely unknown and there is no correlation with the potential biomarkers suggested on basis of chemical trace analysis. It is outlined that specific features connected with the VOC analysis in breath – namely small concentrations of volatiles, interfering background concentrations, considerable sampling effort and sample instability, impracticability regarding routine application - stand in the way of substantial progress. The underlying chemicalanalytical challenge can only be met considering the severe susceptibility of VOC determination to these adverse conditions. Therefore, the attention is drawn to the needs for appropriate quality assurance/quality control as the most important feature for the reliable quantification of volatiles present in trace concentration. Consequently, the advantages of urine as an alternative matrix for volatile biomarker search in the context of diagnosing lung and other cancers are outlined with specific focus on quality assurance and practicability in clinical chemistry. The headspace over urine samples as the VOC source allows adapting gas chromatographical procedures well-established in water analysis. Foremost, the selection of urine over breath as non-invasive matrix should provide considerably more resilience to adverse effects during sampling and analysis. The most important advantage of urine over breath is seen in the option to partition, dispense, mix, spike, store, and thus to dispatch taylor-made urine samples on demand for quality control measures. Although it is still open at this point if cancer diagnosis supported by non-invasively sampled VOC profiles will ultimately reach clinical application the advantages of urine over breath should significantly facilitate urgently required steps beyond the current proof-of-concept stage and towards standardisation. KW - VOC KW - Breath KW - Urine KW - Lung cancer KW - Volatile organic compounds PY - 2020 DO - https://doi.org/10.1016/j.mehy.2020.110060 VL - 143 SP - 110060 PB - Elsevier Ltd. AN - OPUS4-51066 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, S. A1 - Beckmann, Jörg A1 - Cojocari, O. A1 - Feige, V. A1 - Fischer, B. A1 - Friederich, F. A1 - Globisch, B. A1 - Hechtfischer, G. A1 - Hens, K. A1 - Hübers, H.-W. A1 - Jelonnek, J. A1 - Jonuscheit, J. A1 - Keil, A. A1 - Kleine-Ostmann, T. A1 - Mayr, M. A1 - Nüßler, D. A1 - Peichl, M. A1 - Peters, O. A1 - Schür, J. A1 - Sprenger, T. A1 - Steiger, A. A1 - van Frank, S. A1 - Vieweg, N. A1 - Wilk, R. T1 - Terahertzsysteme - Zeitbereichsspektrometer (TDS-Systeme) N2 - Diese Richtlinie definiert Kenngrößen und Messverfahren, um Terahertzsysteme für die Zeitbereichsspektroskopie (TDS)zu spezifizieren. So können Hersteller ihre Systeme übereinstimmend beschreiben und Anwender einfach Systeme vergleichen. Systeme für die Terahertz-Zeitbereichsspektroskopie sind aktive Systeme und nutzen verschiedene Techniken sowohl zur Erzeugung als auch zur zeitaufgelösten Messung von breitbandigen Terahertzimpulsen. Die dazugehörigen Terahertzspektren und -Phasen werden nach einer zeitlichen Abtastung über eine Fourier-Transformation berechnet. In dieser Richtlinie wird ein Überblick über die Funktionsweisen von Zeitbereichsspektrometern gegeben, die eingesetzten Messverfahren näher erläutert sowie die benötigten Begriffe und Kenngrößen definiert. Die Richtlinie konzentriert sich dabei auf Systeme, die auf sogenannten Abtastmessverfahren (Sampling-Messverfahren) basieren. KW - TDS-Systeme PY - 2020 UR - https://www.vdi.de/5590 VL - VDI/VDE 5590 Blatt 2 SP - 1 EP - 22 PB - VDI-Verlag CY - Düsseldorf ET - Entwurf - Oktober 2020 AN - OPUS4-51947 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dorgerloh, Ute A1 - Becker, Roland A1 - Riedel, Juliane A1 - Hofmann, Andrea T1 - Comparison of gas- and liquid chromatography-mass spectrometry for trace analysis of anilines in groundwater N2 - Three chromatographic procedures were investigated regarding their potential for the quantification of aniline and 19 of its methylated and chlorinated derivatives in groundwater. These methods were based on liquid-liquid-extraction in combination with gas chromatography and single quadrupole mass spectrometry (GC/MS) according to German standard DIN 38407-16:1999 and its extension using tandem mass spectrometry (GC/MS-MS), both following liquid-liquid extraction, and as third alternative the direct injection of the water sample into a liquid chromatograph coupled to tandem mass spectrometry (LC/MS-MS). Results were compared using fortified water and real-world contaminated groundwater used in an interlaboratory comparison. It could be shown that GC/MS and GC/MS-MS yielded results deviating less than 10% from each other while all three procedure displayed quantification results deviating less than 15% from the intercomparison reference values in case of each analyte in the concentration range between 1 and 45 µg L-1. Though GC/MS-MS displays a ten-fold higher sensitivity than single quadrupole GC/MS, the precision of both methods in the concentration range was similar. LC/MS-MS has the advantage of no further sample preparation due to the direct injection and leads for methylanilines and meta-, para- substituted chloroanilines to results sufficiently equivalent to the standardised GC/MS method. However, LC/MS-MS is not suitable for ortho-chloroaniline derivates due to significantly lower ion yields than meta- and para-substituted chloroanilines. KW - Interlaboratory comparison KW - Aniline KW - Chloroanilines KW - Methylanilines KW - Groundwater KW - GC/MS KW - GC/MS-MS KW - LC/MS-MS PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-535793 DO - https://doi.org/10.1080/03067319.2021.1987423 VL - 103 IS - 19 SP - 8465 EP - 8477 PB - Taylor & Francis CY - London AN - OPUS4-53579 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ogrinc, N. A1 - Rossi, A. M. A1 - Durbiano, F. A1 - Becker, Roland A1 - Milavec, M. A1 - Bogozalec Kosir, A. A1 - Kakoulides, E. A1 - Ozer, H. A1 - Akcadag, F. A1 - Goenaga-Infante, H. A1 - Quaglia, M. A1 - Mallia, S. A1 - Umbricht, G. A1 - O'Connor, G. A1 - Guettler, B. T1 - Support for a European metrology network on food safety Food-MetNet N2 - This paper describes Food-MetNet, a coordinated preparatory initiative to establish the European Metrology Network on Food Safety (EMN-FS). Food-MetNet aims to establish a long-term ongoing dialogue between the metrology community and relevant stakeholders, in particular, European Union Reference Laboratories (EURLs), National Reference Laboratories (NRLs) and the Joint Research Centre (JRC). This dialogue is meant to support the collection of needs from stakeholders, the take-up of metrological research output and the development of the roadmaps needed to navigate future research. KW - Network KW - Metrology KW - Food KW - Safety KW - Stakeholders PY - 2021 DO - https://doi.org/10.1016/j.measen.2021.100285 VL - 18 SP - 1 EP - 4 PB - Elsevier AN - OPUS4-53740 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Roland A1 - Heyn, L. A1 - Jung, Christian T1 - Indoor exposure to airborne polycyclic aromatic hydrocarbons: A comparison of stir bar sorptive extraction and pump sampling N2 - Stir bar sorptive extraction (SBSE) was compared with standardized pump sampling regarding the prospects to assess airborne levels of polycyclic aromatic hydrocarbons (PAHs) in indoor environments. A historic railway water tower, which will be preserved as a technical monument for museum purposes, was sampled with both approaches because the built-in insulationmaterial was suspected to release PAHs to the indoor air. The 16 PAHs on the US EPA list were quantified using gas chromatography with mass spectrometric detection in filters from pump sampling after solvent extraction and on SBSE devices after thermal desorption. SBSEwas seen to sample detectable PAHmasseswith excellent repeatability and a congener pattern largely similar to that observed with pump sampling. Congener patterns were however significantly different from that in the PAH source because release from the insulation material is largely triggered by the respective congener vapor pressures. Absolute masses in the ng range sampled by SBSE corresponded to airborne concentrations in the ng L−1 range determined by pump sampling. Principle differences between SBSE and pump sampling as well as prospects of SBSE as cost-effective and versatile complement of pump sampling are discussed. KW - Polycyclic aromatic hydrocarbons KW - Adsorption KW - Extraction KW - Indoor air PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-537427 DO - https://doi.org/10.1002/eng2.12419 VL - 3 IS - 12 SP - 1 EP - 10 PB - John Wiley & Sons Ltd. AN - OPUS4-53742 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gupta, P. A1 - Karnaushenko, D. D. A1 - Becker, C. A1 - Okur, I. E. A1 - Melzer, Michael A1 - Özer, B. A1 - Schmidt, O. G. A1 - Karnaushenko, D. T1 - Large Scale Exchange Coupled Metallic Multilayers by Roll-to-Roll (R2R) Process for Advanced Printed Magnetoelectronics N2 - Till now application of printed magnetoelectronics is hindered by lack of large area exchange coupled metallic multilayers required to produce printable magneto-sensory inks. Large-scale roll-to-roll (R2R) fabrication process is an attractive approach owing to its capabilities for high volume, high throughput, and large area manufacturing. Precise and high performance R2R sputtering technology is developed to fabricate large area giant magnetoresistive (GMR) thin-films stacks that contain 30 metallic bilayers prepared by continuous R2R sputtering of Co and Cu sequential on a hundred meters long polyethylene terephthalate (PET) web. The R2R sputtered Co/Cu multilayer on a 0.2 × 100 m2 PET web exhibits a GMR ratio of ≈40% achieving the largest area exchange coupled room temperature magneto-sensitive system demonstrated to date. The prepared GMR thin-film is converted to magnetosensitive ink that enables printing of magnetic sensors with high performance in a cost-efficient way, which promotes integration with printed electronics. An average GMR ratio of ≈18% is obtained for 370 printed magnetic sensors. The realized precise R2R sputtering approach can also be extended to a wide range of hybrid thin-film material systems opening up a path for new functional inks applied with printing technologies. KW - Printed Electronics KW - Flexible Magnetic Sensors KW - Roll-to-Roll Processing KW - Functional Materials KW - Upscaling PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-552344 DO - https://doi.org/10.1002/admt.202200190 SN - 2365-709X SP - 1 EP - 11 PB - Wiley-VCH CY - Weinheim, Deutschland AN - OPUS4-55234 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Häßler, Dustin A1 - Becker, Andreas A1 - Fürst, Richard A1 - Hothan, Sascha ED - Simões da Silva, Luís ED - Vila Real, Paulo ED - Santiago, Aldina ED - Craveiro, Hélder ED - Laim, Luís T1 - Fire resistance testing of steel tension members with hollow section protected by intumescent coating N2 - This book presents the proceedings of the Thirteenth International Conference Structures in Fire. The conference took place at the Department of Civil Engineering, University of Coimbra, Portugal, from 19 to 21 June 2024, under the auspices of the SIF movement. Structural fire safety is a crucial aspect of the design of buildings and infrastructures. Significant advances in research have increased the knowledge on this topic. However, until the 1990s, there were few forums for structural fire engineers to exchange ideas and share research findings. SIF (Structures in Fire) specialised workshop series was conceived in the late 1990s and the “First International SIF Workshop” was held in Copenhagen, Denmark in 2000, followed by workshops in Christchurch, New Zealand (2002), Ottawa, Canada (2004) and Aveiro, Portugal (2006). The series of workshops evolved into conferences and the 2008 event in Singapore was the fifth International Conference on Structures in Fire. This was followed by events in East Lansing, USA (2010), Zurich, Switzerland (2012), Shanghai, China (2014), New Jersey, USA (2016), Belfast, UK (2018), Brisbane, Australia (2020) and Hong Kong, China (2022). Information about previous conferences, including complete proceedings, can be found at www.structuresinfire.com. The main mission of SIF conferences is to provide an opportunity for researchers and engineers from the global structural fire engineering community to participate, share and discuss the recent findings, innovations and developments with their peers in an open and international forum. Following the great success of the previous International Conferences, the University of Coimbra was selected to host the 13th International Conference on Structures in Fire. As with most of the recent conferences, the number of papers submitted far exceeds the number of papers that can be accommodated in the three-day programme, even with two parallel sessions. SIF 2024 received 249 abstracts before the deadline and accepted 172 abstracts after the review process by at least three reviewers from the scientific committee. These proceedings represent 132 full papers, collectively representing the state of the art in fundamental knowledge and practical application of structures in fire. Forty-two countries from around the globe have contributed to them. The papers are grouped into the following research topics: Applications of Structural Fire Engineering, Composite Structures in Fire, Concrete Structures in Fire, Timber Structures in Fire, Masonry Structures in Fire, Steel Structures in Fire, Experimental Research of Structures in Fire, Numerical Modelling of Structures in Fire, Other Topics Related to Structures in Fire. Finally, the Organizing Committee would like to thank the continuous support from the SIF Steering Committee chaired by Prof Jean-Marc Franssen. We also would like to thank to the Scientific Committee chaired by Prof Paulo Vila Real, the authors and all the supporting staff (and volunteer team) from the Institute for Sustainability and Innovation in Structural Engineering (ISISE) in Coimbra, for making SIF 2024 a successful conference. DA - 19.06.2024 KW - Fire resistance KW - Fire test KW - Intumescent coating KW - Steel KW - Tension member PY - 2024 DO - https://doi.org/10.30779/cmm_SIF24 SP - 1173 EP - 1183 PB - CMM – Portuguese Steelwork Association AN - OPUS4-60815 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Groschke, Matthias A1 - Becker, Roland T1 - Comparison of carrier gases for the separation and quantification of mineral oil hydrocarbon (MOH) fractions using online coupled high performance liquid chromatography-gas chromatography-flame ionisation detection N2 - On-line coupled high performance liquid chromatography-gas chromatography-flame ionisation detection (HPLC-GC-FID) was used to compare the effect of hydrogen, helium and nitrogen as carrier gases on the chromatographic characteristics for the quantification of mineral oil hydrocarbon (MOH) traces in food related matrices. After optimisation of chromatographic parameters nitrogen carrier gas exhibited characteristics equivalent to hydrogen and helium regarding requirements set by current guidelines and standardisation such as linear range, quantification limit and carry over. Though nitrogen expectedly led to greater peak widths, all required separations of standard compounds were sufficient and humps of saturated mineral oil hydrocarbons (MOSH) and aromatic mineral oil hydrocarbons (MOAH) were appropriate to enable quantitation similar to situations where hydrogen or helium had been used. Slightly increased peak widths of individual hump components did not affect shapes and widths of the MOSH and MOAH humps were not significantly affected by the use of nitrogen as carrier gas. Notably, nitrogen carrier gas led to less solvent peak tailing and smaller baseline offset. Overall, nitrogen may be regarded as viable alternative to hydrogen or helium and may even extend the range of quantifiable compounds to highly volatile hydrocarbon eluting directly after the solvent peak. KW - Mineral oil hydrocarobons KW - Food KW - Liquid chromatography KW - Gas chromatography KW - MOSH/MOAH PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601450 DO - https://doi.org/10.1016/j.chroma.2024.464946 SN - 0021-9673 VL - 1726 SP - 1 EP - 7 PB - Elsevier CY - New York, NY AN - OPUS4-60145 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schallschmidt, Kristin A1 - Becker, Roland A1 - Jung, Christian A1 - Bremser, Wolfram A1 - Nehls, Irene A1 - Leschber, G. A1 - Frese, S. A1 - Walles, T. A1 - Neudecker, J. T1 - Comparison of volatile organic compounds from lung cancer patients and healthy controls—challenges and limitations of an observational study N2 - The design and operation of an observational study on the profiles of volatile organic compounds (VOC) in the breath of 37 lung cancer patients and 23 healthy controls of similar age is outlined. The necessity to quantify each VOC considered as potential disease marker on basis of individual calibration is elaborated and the quality control measures required to maintain reproducibility in breath sampling and subsequent instrumental trace VOC analysis using SPME-GC-MS over a study period of 14 months are described. 24 VOC were quantified on basis of their previously suggested potential as cancer markers. The breath concentration levels of aromatic compounds was expectedly increased in smokers while lung cancer patients displayed significantly increased levels of oxygenated VOC such as aldehydes, 2-butanone and 1-butanol. Though sets of selected oxygenated VOC displayed sensitivities and specificities between 80 and 90% using linear discriminant analysis with leave-one-out cross validation the effective selectivity of the breath VOC approach with regard to cancer detection is clearly limited. Results were discussed against the background of the literature on volatile cancer marker investigations and the prospects to link increased VOC levels in patients’ breath with approaches to employ sniffer dogs. Experiences from this study and the literature suggest that the current state of breath VOC based discrimination between cancer patients and healthy controls is hardly improvable. Observational studies tend to observe significant differences mostly in levels of certain oxygenated VOC but without resolution required for practical application. Any step towards practicable exploitation of VOC profile differences for illness detection would have to solve current restrictions set by the low and variable VOC concentrations. Further challenges are the technical complexity of studies involving breath sampling and possibly the limited capability of current analytical procedures to detect instable marker candidates. KW - Breath KW - Volatile organic compounds KW - Marker KW - Cancer KW - Gas chromatography KW - Solid phase microextraction KW - Volatilome PY - 2016 DO - https://doi.org/10.1088/1752-7155/10/4/046007 SN - 1752-7155 SN - 1752-7163 VL - 10 IS - 4 SP - Article 046007, 1 EP - 17 PB - IOP Publishing AN - OPUS4-37801 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Ben T1 - Influence of sample size and distribution function N2 - Influence of sample size and statistical distribution function on the safety evaluation of composite pressure cylinder. T2 - Follow-up Workshop on Statistical Safety Assessment of Composite Cylinders CY - Berlin, Germany DA - 05.10.2016 KW - Statistic KW - Composite KW - Pressure KW - Cylinder PY - 2016 AN - OPUS4-37976 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Ben T1 - Determination of consequences and accepted failure rates N2 - Evaluation of probability and consequence of critical failures of composite cylinders. T2 - Follow-up Workshop on Statistical Safety Assessment of Composite Cylinders CY - Berlin, Germany DA - 05.10.2016 KW - Failure KW - Composite KW - Pressure KW - Cylinder KW - Consequence KW - Rate PY - 2016 AN - OPUS4-37977 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Ben T1 - General aspects of risk based safety evaluation N2 - Comparison of methods for safety assessment of composite cylinders by statistical simulations. T2 - Follow-up Workshop on Statistical Safety Assessment of Composite Cylinders CY - Berlin, Germany DA - 05.10.2016 KW - Monte-carlo simulation KW - Composite KW - Pressure KW - Cylinder PY - 2016 AN - OPUS4-37978 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dorgerloh, Ute A1 - Becker, Roland A1 - Nehls, Irene T1 - Volatile hydrocarbons in contaminated soil: Robustness of fractional quantification using headspace gas chromatography-mass-spectrometry N2 - Fuel contamination of soils display complex and variable hydrocarbon mixtures with different volatility and toxicity characteristics. A recently suggested headspace procedure for the structure-based quantification of volatile hydrocarbons is evaluated regarding repeatability, reproducibility, and practical robustness. Three aliphatic and three aromatic fractions covering the boiling range between 69 and 216°C were defined as summation parameters by their respective equivalent carbon number ranges. A standard mixture of 35 aliphatic and aromatic hydrocarbons was used for calibration on basis of selected mass fragments specific for the aliphatics and aromatics, respectively. Two standard soils were fortified with the standard mixture or different fuels, respectively, and submitted to the analytical procedure. Limit of detection (LOD) and limit of quantification (LOQ) were for all fractions lower than 0.1 and 0.3 mg/kg, respectively. Analyte recovery was linear up to between 20 and 110 mg hydrocarbons/kg soil depending on the fraction. Hydrocarbon recovery ranged between 80% and 110% depending on the fraction and the repeatability was typically better than 10%. Finally, the impact of extraction solvent variation, column solid-phase polarity, and alternative summation of fractions were investigated. The procedure was applied to liner samples taken from a site contaminated with aviation fuel and its practicability is discussed. KW - Gasoline KW - Contaminated site KW - Equivalent carbon number KW - Fuel KW - Static headspace PY - 2018 DO - https://doi.org/10.1080/15320383.2018.1418287 SN - 1532-0383 SN - 1549-7887 VL - 27 IS - 1 SP - 1 EP - 12 PB - Taylor & Francis AN - OPUS4-43889 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Goetze, A1 - Selle, Hermann A1 - Koenen, Heinrich A1 - Becker, A1 - Schmidt, T1 - Sprengtechnische Untersuchungen - Die Detonationsfähigkeit von Gelatinedynamit in Abhängigkeit von der Lagerdauer PY - 1929 SN - 0368-1785 VL - VII SP - 174 EP - 175 PB - Verl. Chemie CY - Berlin AN - OPUS4-42142 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fischer-Tenhagen, C. A1 - Johnen, D. A1 - Nehls, Irene A1 - Becker, Roland T1 - A Proof of Concept: Are Detection Dogs a Useful Tool to Verify Potential Biomarkers for Lung Cancer? N2 - Early and reliable diagnostic test is essential for effective therapy of lung cancer. Volatile organic compounds that are characteristic for cancer could serve as valuable biomarkers in cancer diagnosis. Both trace analytical and detection dog approaches give some evidence for the existence of such biomarkers. In this proof of concept, study dogs and trace analysis were implemented in combination to gain more information concerning cancer biomarkers. Two dogs were trained to distinguish between absorbed breath samples of lung cancer patients and healthy persons and succeeded with correct identification of patients with 9/9 and 8/9 and correct negative indications from of 8/10 and 4/10 samples from healthy individuals. A recent observational study found that breath samples from lung cancer patients showed an increase in 1-butanol, 2-butanone, 2-pentanone, and hexanal. Synthetic air samples were therefore fortified with these compounds and adsorbed to a fleece. Tested against breath samples from healthy probands, on presentation to the dogs these synthetic samples provoked an indication in three out of four samples. We were able to demonstrate that a combination of the natural nose of a dog and a trace analytic technique can be a valuable concept in the search for cancer biomarkers. KW - Lung cancer KW - Breath KW - Detection dog KW - Biomarkers KW - Sampling KW - Synthetic air PY - 2018 DO - https://doi.org/10.3389/fvets.2018.00052 SN - 2297-1769 VL - 5 SP - Article 52,1 EP - 6 PB - Frontiers Research Foundation CY - Lausanne AN - OPUS4-44466 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Bestimmung der Beständigkeit von Sprengstoffen PY - 1935 SN - 0368-1785 VL - XIV SP - 265 EP - 273 PB - Verl. Chemie CY - Berlin AN - OPUS4-43823 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittweg, A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Temperaturmessungen an Geschossen bei Sonnenbestrahlung PY - 1935 SN - 0368-1785 VL - XIV SP - 273 EP - 274 PB - Verl. Chemie CY - Berlin AN - OPUS4-43824 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Formbeständigkeit von Pappebüchsen für Sprengladungen beim Lagern PY - 1935 SN - 0368-1785 VL - XIV SP - 274 EP - 275 PB - Verl. Chemie CY - Berlin AN - OPUS4-43825 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Über gieß- und preßbare Sprengstoffe für militärische Zwecke - Über Nitropentaerythrit und daraus hergestellte Gemische - Nitropentaerythrit mit verdampfbaren Zusätzen als Rauchentwickler PY - 1935 SN - 0368-1785 VL - XIV SP - 239 EP - 240 PB - Verl. Chemie CY - Berlin AN - OPUS4-43810 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Über gieß- und preßbare Sprengstoffe für militärische Zwecke - Über Nitropentaerythrit und daraus hergestellte Gemische - Cyclotrimethylentrinitramin PY - 1935 SN - 0368-1785 VL - XIV SP - 240 EP - 243 PB - Verl. Chemie CY - Berlin AN - OPUS4-43811 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Über gieß- und preßbare Sprengstoffe für militärische Zwecke - Äthanolamindinitrat und Äthylendiamindinitrat PY - 1935 SN - 0368-1785 VL - XIV SP - 243 EP - 246 PB - Verl. Chemie CY - Berlin AN - OPUS4-43812 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Über Nitropentaerythrit und daraus hergestellte Gemische PY - 1935 SN - 0368-1785 VL - XIV SP - 232 EP - 233 PB - Verl. Chemie CY - Berlin AN - OPUS4-43794 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Über gieß- und preßbare Sprengstoffe für militärische Zwecke - Über Nitropentaerythrit und daraus hergestellte Gemische - Nitropentaerythrit für sich und mit Montanwachs phlegmatisiert PY - 1935 SN - 0368-1785 VL - XIV SP - 233 EP - 237 PB - Verl. Chemie CY - Berlin AN - OPUS4-43797 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Über gieß- und preßbare Sprengstoffe für militärische Zwecke - Über Nitropentaerythrits und daraus hergestellte Gemische - Gießbarmachung des Nitropentaerythrits durch Trinitrotoluol PY - 1935 SN - 0368-1785 VL - XIV SP - 237 EP - 238 PB - Verl. Chemie CY - Berlin AN - OPUS4-43798 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Über gieß- und preßbare Sprengstoffe für militärische Zwecke - Über Nitropentaerythrit und daraus hergestellte Gemische - Gießbarmachung von Nitropentaerythrit ohne Trinitrotoluol und andere Sparstoffe PY - 1935 SN - 0368-1785 VL - XIV SP - 238 EP - 238 PB - Verl. Chemie CY - Berlin AN - OPUS4-43799 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Über gieß- und preßbare Sprengstoffe für militärische Zwecke - Über Nitropentaerythrit und daraus hergestellte Gemische - Plastische Sprengstoffmischungen aus Nitropentaerythrit PY - 1935 SN - 0368-1785 VL - XIV SP - 238 EP - 239 PB - Verl. Chemie CY - Berlin AN - OPUS4-43800 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Über gieß- und preßbare Sprengstoffe für militärische Zwecke - Über Nitropentaerythrit und daraus hergestellte Gemisch - Andere Phlegmatisierungsmittel für Nitropentaerythrit PY - 1935 SN - 0368-1785 VL - XIV SP - 239 EP - 239 PB - Verl. Chemie CY - Berlin AN - OPUS4-43801 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Über gieß- und preßbare Sprengstoffe für militärische Zwecke - Über Nitropentaerythrit und daraus hergestellte Gemische - Nitropentaerythrit mit verdampfbaren Zusätzen als Rauchentwickler PY - 1935 SN - 0368-1785 VL - XIV SP - 239 EP - 240 PB - Verl. Chemie CY - Berlin AN - OPUS4-43802 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Untersuchungen über "rostfreie" Zündhütchen - Lagerbeständigkeit PY - 1935 SN - 0368-1785 VL - XIV SP - 124 EP - 129 PB - Verl. Chemie CY - Berlin AN - OPUS4-43710 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Untersuchungen über "rostfreie" Zündhütchen - Abnahmeuntersuchung von Zündhütchen 30 PY - 1935 SN - 0368-1785 VL - XIV SP - 129 EP - 129 PB - Verl. Chemie CY - Berlin AN - OPUS4-43711 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Untersuchungen über "rostfreie" Zündhütchen - Versuche über den Gefährlichkeitsgrad von Zündhütchen 30 im Vergleich zu Zündhütchen 88 PY - 1935 SN - 0368-1785 VL - XIV SP - 129 EP - 131 PB - Verl. Chemie CY - Berlin AN - OPUS4-43712 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Sätze für Verzögerungszünder PY - 1935 SN - 0368-1785 VL - XIV SP - 132 EP - 134 PB - Verl. Chemie CY - Berlin AN - OPUS4-43713 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Explosive Eigenschaften von Blitzlichtpulvern PY - 1935 SN - 0368-1785 VL - XIV SP - 135 EP - 137 PB - Verl. Chemie CY - Berlin AN - OPUS4-43714 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Zirkonwasserstoff als Anfeuerungsbestandteil PY - 1935 SN - 0368-1785 VL - XIV SP - 137 EP - 139 PB - Verl. Chemie CY - Berlin AN - OPUS4-43715 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Eigenschaften und Abnahmeuntersuchung von Leuchtspurmunition PY - 1935 SN - 0368-1785 VL - XIV SP - 139 EP - 142 PB - Verl. Chemie CY - Berlin AN - OPUS4-43716 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Mechanische Empfindlichkeit von Feuerwerkskörpern für R-Patronen; Vermeidung von Rohrkrepierern beim Verschießen von Signalpatronen mit grünem Leuchtstern PY - 1935 SN - 0368-1785 VL - XIV SP - 142 EP - 143 PB - Verl. Chemie CY - Berlin AN - OPUS4-43717 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Untersuchung von Sicherheitszündhölzern auf angebliche Selbstentzündung PY - 1935 SN - 0368-1785 VL - XIV SP - 143 EP - 149 PB - Verl. Chemie CY - Berlin AN - OPUS4-43718 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Verwendbarkeit eines Phosphor-Rauchsatzes für Signalpatronen PY - 1935 SN - 0368-1785 VL - XIV SP - 150 EP - 150 PB - Verl. Chemie CY - Berlin AN - OPUS4-43720 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Verwendbarkeit von Phosphor als Mittel zur Brandstiftung PY - 1935 SN - 0368-1785 VL - XIV SP - 150 EP - 151 PB - Verl. Chemie CY - Berlin AN - OPUS4-43723 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Mitarbeit bei der Entwicklung der Brandmunition PY - 1935 SN - 0368-1785 VL - XIV SP - 152 EP - 155 PB - Verl. Chemie CY - Berlin AN - OPUS4-43724 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Untersuchungen über die Bekämpfung von Elektron-Thermitbrandbomben bzw. brennendem Elektronmetall PY - 1935 SN - 0368-1785 VL - XIV SP - 156 EP - 157 PB - Verl. Chemie CY - Berlin AN - OPUS4-43725 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Untersuchungen über die Explosionsfähigkeit von Salpetervergütungsbädern für Aluminiumlegierungen PY - 1935 SN - 0368-1785 VL - XIV SP - 157 EP - 160 PB - Verl. Chemie CY - Berlin AN - OPUS4-43726 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Explosionen und Unfälle PY - 1935 SN - 0368-1785 VL - XIV SP - 160 EP - 162 PB - Verl. Chemie CY - Berlin AN - OPUS4-43728 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Arbeiten über selbstentzündliche und sonstige gefährliche Stoffe PY - 1935 SN - 0368-1785 VL - XIV SP - 163 EP - 163 PB - Verl. Chemie CY - Berlin AN - OPUS4-43729 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Arbeiten über selbstentzündliche und sonstige gefährliche Stoffe - Empfindlichkeit der Chlorbleichmittel "Aktivin" und "Peraktivin" gegen Wärme und mechanische Beanspruchungen PY - 1935 SN - 0368-1785 VL - XIV SP - 163 EP - 165 PB - Verl. Chemie CY - Berlin AN - OPUS4-43730 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Arbeiten über selbstentzündliche und sonstige gefährliche Stoffe - Zersetzlichkeit und Explosionsfähigkeit von "Wasserstoffsuperoxyd in fester Form" PY - 1935 SN - 0368-1785 VL - XIV SP - 165 EP - 165 PB - Verl. Chemie CY - Berlin AN - OPUS4-43731 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Prüfung von Sprengkapseln PY - 1935 SN - 0368-1785 VL - XIV SP - 177 EP - 179 PB - Verl. Chemie CY - Berlin AN - OPUS4-43745 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten betr. Zündmittel, pyrotechnische Gegenstände, selbstentzündliche Stoffe, Brandmassen und Feuerschutz von Holz - Prüfung von Sprengkapseln - Über Verwendungsmöglichkeit von Bleiazid an Stelle des Knallquecksilbers als Initialladung für Sprengkapseln PY - 1935 SN - 0368-1785 VL - XIV SP - 179 EP - 181 PB - Verl. Chemie CY - Berlin AN - OPUS4-43746 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Untersuchungen über Treibmittel - Fortschritte und Änderungen in der Pulverherstellung PY - 1935 SN - 0368-1785 VL - XIV SP - 182 EP - 183 PB - Verl. Chemie CY - Berlin AN - OPUS4-43747 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Untersuchungen über Treibmittel - Mündungsfeuer PY - 1935 SN - 0368-1785 VL - XIV SP - 183 EP - 183 PB - Verl. Chemie CY - Berlin AN - OPUS4-43748 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Untersuchungen über Treibmittel - Bestimmung der chemischen Beständigkeit nach dem Verfahren von Bergmann-Junk PY - 1935 SN - 0368-1785 VL - XIV SP - 183 EP - 184 PB - Verl. Chemie CY - Berlin AN - OPUS4-43749 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Untersuchungen über Treibmittel - Bestimmung von Stabilisatoren in rauchschwachen Pulvern PY - 1935 SN - 0368-1785 VL - XIV SP - 185 EP - 188 PB - Verl. Chemie CY - Berlin AN - OPUS4-43750 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Untersuchungen über Treibmittel - Bestimmung von Feuchtigkeit in Pulvern PY - 1935 SN - 0368-1785 VL - XIV SP - 188 EP - 196 PB - Verl. Chemie CY - Berlin AN - OPUS4-43751 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Untersuchungen über Treibmittel - Abnahmeprüfung von Pulvern PY - 1935 SN - 0368-1785 VL - XIV SP - 196 EP - 198 PB - Verl. Chemie CY - Berlin AN - OPUS4-43752 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Untersuchungen über Treibmittel - Farbreaktion zum Nachweis disubstituierter Urethane PY - 1935 SN - 0368-1785 VL - XIV SP - 198 EP - 200 PB - Verl. Chemie CY - Berlin AN - OPUS4-43753 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Thermochemische und thermodynamische Untersuchungen - Verbrennungs- und Bildungswärmen für wichtige Stoffe in der Sprengstoffchemie PY - 1935 SN - 0368-1785 VL - XIV SP - 200 EP - 203 PB - Verl. Chemie CY - Berlin AN - OPUS4-43754 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Über gieß- und preßbare Sprengstoffe für militärische Zwecke - Die Nitrate des Cyclopentanons und -pentanols sowie des Cyclohexanons und -hexanols PY - 1935 SN - 0368-1785 VL - XIV SP - 247 EP - 247 PB - Verl. Chemie CY - Berlin AN - OPUS4-43813 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Über gieß- und preßbare Sprengstoffe für militärische Zwecke - Dinitrodimethylsulfamid und -oxamid PY - 1935 SN - 0368-1785 VL - XIV SP - 247 EP - 249 PB - Verl. Chemie CY - Berlin AN - OPUS4-43814 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Über gieß- und preßbare Sprengstoffe für militärische Zwecke - Di- und Trinitrophenylglykoläthernitrat PY - 1935 SN - 0368-1785 VL - XIV SP - 249 EP - 251 PB - Verl. Chemie CY - Berlin AN - OPUS4-43815 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Eigenschaften und Darstellung des Nitromethans und des Nitroisobutylglyzerintrinitrats PY - 1935 SN - 0368-1785 VL - XIV SP - 251 EP - 252 PB - Verl. Chemie CY - Berlin AN - OPUS4-43816 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Reinigung von Rohtrinitrotoluol PY - 1935 SN - 0368-1785 VL - XIV SP - 252 EP - 253 PB - Verl. Chemie CY - Berlin AN - OPUS4-43817 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Chloratit 3 PY - 1935 SN - 0368-1785 VL - XIV SP - 253 EP - 257 PB - Verl. Chemie CY - Berlin AN - OPUS4-43818 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Haid, August A1 - Selle, Hermann A1 - Metz, Ludwig A1 - Koenen, Heinrich A1 - Schmidt, A1 - Becker, A1 - Hunold, A1 - Dittmar, Paul A1 - Frenzel, T1 - Arbeiten auf dem Gebiete der Sprengmittel - Explosive Eigenschaften des festen Azetylens PY - 1935 SN - 0368-1785 VL - XIV SP - 257 EP - 258 PB - Verl. Chemie CY - Berlin AN - OPUS4-43819 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -