TY - CONF A1 - Österle, Werner A1 - Urban, Ingrid A1 - Nebauer, E. T1 - Alloying reactions of Au-Ni-Ge ohmic contacts to n-GaAs PY - 1994 SP - 781 EP - 782 CY - Les Ulis AN - OPUS4-2479 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bettge, Dirk A1 - Österle, Werner A1 - Ziebs, Josef T1 - Temperature dependence of additional cyclic hardening of the nickel-base superalloy IN 738 LC during out-of-phase multiaxial deformation PY - 1995 SN - 1359-6462 SN - 1872-8456 VL - 32 IS - 10 SP - 1601 EP - 1606 PB - Elsevier CY - Oxford AN - OPUS4-2480 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bettge, Dirk A1 - Österle, Werner A1 - Ziebs, Josef T1 - Temperature dependence of yield strength and elongation of the nickel-base superalloy IN 738 LC and the corresponding microstructural evolution PY - 1995 SN - 0179-4841 SN - 0044-3093 VL - 86 SP - 190 EP - 197 PB - Hanser CY - München AN - OPUS4-2481 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Jiao, Feng A1 - Österle, Werner A1 - Portella, Pedro Dolabella A1 - Ziebs, Josef T1 - Biaxial path-dependence of low-cycle fatigue behaviour and microstructure of alloy 800 H at room temperature N2 - Low-cycle fatigue experiments under combined axial-torsional loading have been carried out on alloy 800 H tubular specimens at room temperature. In comparison with proportional loading, an extra cyclic hardening effect produced by nonproportional loading was observed. The microstructure study highlights the fact that the dislocation arrangement under proportional loading is significantly different from that under nonproportional loading. Mechanical twinning was found in specimens cycled under axial loading and nonproportional loading. It is suggested that mechanical twinning depends not only on shear stress but also on normal stress on the plane of maximum shearing. The extra hardening can be interpreted in terms of the deformation microstructure. Fatigue cracking was initiated generally at the specimen surfaces along the plane of maximum shearing, but under nonproportional loading cracks were found also in the bulk of the specimens. Transcrystalline crack propagation was observed in the specimens after proportional and nonproportional LCF tests. PY - 1995 DO - https://doi.org/10.1016/0921-5093(94)09690-2 SN - 0921-5093 SN - 1873-4936 VL - 196 IS - 1 SP - 19 EP - 24 PB - Elsevier CY - Amsterdam AN - OPUS4-2503 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Merkel, U. A1 - Nebauer, E. A1 - Österle, Werner A1 - Würfl, J. ED - Brueck, S. R. J. T1 - RTA-treated ohmic contacts to GaAs containing WSiN barriers T2 - MRS Spring Meeting on Rapid Thermal and Integrated Processing CY - San Francisco, CA, USA DA - 1995-04-17 PY - 1995 SN - 1-558-99290-1 SN - 0272-9172 N1 - Serientitel: Materials Research Society symposium proceedings – Series title: Materials Research Society symposium proceedings IS - 387 SP - 431 EP - 436 PB - Materials Research Soc. CY - Pittsburgh, Pa. AN - OPUS4-2504 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kuhmann, J. A1 - Harde, P. A1 - Pech, O. A1 - Pittroff, W. A1 - Preuß, A. A1 - Adolphi, B. A1 - Wirth, Thomas A1 - Österle, Werner ED - Reichl, H. T1 - Fluxless flip-chip bonding for the photonic assembly - comparison between evaporated SnPb (60/40) and AuSn (80/20) solder T2 - 5th International Conference on Micro-Electro-, -Opto-, -Mechanical Systems and Components CY - Potsdam, Germany DA - 1996-09-17 PY - 1996 SN - 3-8007-2200-3 VL - 5 SP - 91 EP - 97 PB - VDE-Verl. CY - Berlin AN - OPUS4-2544 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Urban, Ingrid A1 - Klein, A. A1 - Österle, Werner A1 - Merkel, U. T1 - Phasenbildung in Metall-Halbleiterkontaktschichten und Präparationstechnik für TEM-Untersuchung T2 - 9. Internationale Metallographie-Tagung CY - Leoben, Deutschland DA - 1994-09-28 PY - 1995 SN - 3-446-18221-7 SN - 0343-3579 N1 - Serientitel: Sonderbände der praktischen Metallographie – Series title: Sonderbände der praktischen Metallographie IS - 26 SP - 339 EP - 349 PB - Hanser CY - München AN - OPUS4-2505 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Österle, Werner ED - Liu, G. T1 - Alternative approaches to the microstructure-strength-relationship of LC and HSLA steels T2 - Third International Conference on HSLA Steels CY - Beijing, PR China DA - 1995-10-25 PY - 1995 SN - 7-504-62091-2 SP - 243 EP - 246 PB - China Science and Technology Press CY - Beijing AN - OPUS4-2506 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sievert, Rainer A1 - Österle, Werner A1 - Olschewski, Jürgen A1 - Ziebs, Josef T1 - Physical interpretation of a viscoplastic model applied to high temperature performance of a nickel-base superalloy T2 - 7th International Conference on Mechanical Behaviour of Materials CY - The Hague, Netherlands DA - 1995-01-01 PY - 1995 SP - 557 EP - 558 CY - Den Haag AN - OPUS4-2507 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bettge, Dirk A1 - Jiao, F. A1 - Österle, Werner A1 - Ziebs, Josef ED - Lütjering, G. T1 - An extended model of the tension-compression asymmetry of single crystal nickel-base superalloys T2 - 6th International Fatigue Congress CY - Berlin, Germany DA - 1996-05-06 PY - 1996 SN - 0-08-042268-3 VL - 2 IS - 2 SP - 885 EP - 889 PB - Pergamon CY - Oxford AN - OPUS4-2508 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Jiao, F. A1 - Bettge, Dirk A1 - Österle, Werner A1 - Ziebs, Josef T1 - Tension-compression asymmetry of the [001] single crystal nickel-base superalloy SC16 under cyclic loading at elevated temperatures PY - 1996 SN - 1359-6454 SN - 1873-2453 VL - 44 SP - 3933 EP - 3942 PB - Elsevier Science CY - Kidlington AN - OPUS4-2509 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Österle, Werner A1 - Ressel, P. T1 - XTEM investigation of Ge/Pd shallow contact to p-IN0.53Ga0.47As N2 - Cross-sectional transmission electron microscopy, in combination with energy dispersive X-ray spectroscopy and focused beam microdiffraction, was applied to study the solid-state reactions taking place during contact formation of the system Ge(115 nm)/Pd(50 nm)—In0.53Ga0.47As. In order to get information about the sequence of the different processes, rapid thermal, annealing experiments in the range 225–400 °C were performed. The following features were observed: at 225 °C Pd reacted with the substrate forming the quaternary phase PdxIn0.53Ga0.47As (x ˜ 4), and with the Ge-layer forming mainly PdGe and Pd2Ge. Between PdxIn0.53Ga0.47As and In0.53Ga0.47As, a 5 nm thick amorphous Pd-In-Ga-As layer remained, indicating that the first reaction step was solid-state amorphization. After annealing at 350 °C, PdxIn0.53Ga0.47As disappeared and regrowth of In0.53Ga0.47As occured. Finally, at 400 °C, residual Ge from the amorphous top layer diffused to the interface and grew epitaxially on the regrown In0.53Ga0.47As, thus separating the III–V compound semiconductor from the Pd-Ge reaction products. The interface remained flat, while only about 10 nm of the active In0.53Ga0.47As layer had been modified during the annealing processes. PY - 1996 DO - https://doi.org/10.1016/0921-5107(96)01580-2 SN - 0921-5107 SN - 1873-4944 VL - 40 IS - 1 SP - 42 EP - 49 PB - Elsevier CY - Amsterdam AN - OPUS4-2513 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ressel, P. A1 - Österle, Werner A1 - Urban, Ingrid A1 - Dörfel, Ilona A1 - Klein, A. A1 - Vogel, K. A1 - Kräutle, H. T1 - Transmission electron microscopy study of rapid thermally annealed Pd/Ge contacts on IN0.53Ga0.47As PY - 1996 SN - 0021-8979 SN - 1089-7550 VL - 88 SP - 3910 EP - 3914 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-2514 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Klein, A. A1 - Urban, Ingrid A1 - Ressel, P. A1 - Nebauer, E. A1 - Merkel, U. A1 - Österle, Werner T1 - Preparation, transmission electron microscopy, and microanalytical investigations of metal-III-V semiconductor interfaces PY - 1996 SN - 1044-5803 SN - 1873-4189 VL - 37 SP - 143 EP - 151 PB - Elsevier CY - New York, NY AN - OPUS4-2528 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Urban, Ingrid A1 - Dörfel, Ilona A1 - Österle, Werner A1 - Schierhorn, Eike T1 - Interfaces between hard coating systems and substrates T2 - 11th European Conference on Electron Microscopy (EUREM-11) CY - Dublin, Ireland DA - 1996-08-26 PY - 1996 SN - 2-9600163-0-0 PB - CESM, Committee of European Societies of Microscopy CY - Brussels AN - OPUS4-2545 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Österle, Werner A1 - Urban, Ingrid A1 - Nebauer, E. A1 - Ressel, P. ED - Thomann, H. T1 - Metallurgie von Ohmschen Kontakten auf aktiven Halbleiterschichten T2 - Werkstoffwoche '96 (WW) CY - Stuttgart, Deutschland DA - 1996-05-28 PY - 1997 SN - 3-88355-229-1 VL - 1 SP - 199 EP - 204 PB - DGM Informationsges. CY - Frankfurt AN - OPUS4-2546 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Sievert, Rainer A1 - Österle, Werner A1 - Olschewski, Jürgen A1 - Ziebs, Josef T1 - Physical interpretation of a viscoplastic model applied to high temperature performance of a nickel-base superalloy PY - 1997 SN - 0179-4841 SN - 0044-3093 VL - 88 SP - 416 EP - 424 PB - Hanser CY - München AN - OPUS4-2547 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Seah, M.P. A1 - Spencer, S.J. A1 - Bensebaa, F. A1 - Vickridge, I. A1 - Danzebrink, H. A1 - Krumrey, M. A1 - Gross, Thomas A1 - Österle, Werner A1 - Wendler, E. A1 - Rheinländer, B. A1 - Azuma, Y. A1 - Kojima, I. A1 - Suzuki, N. A1 - Suzuki, M. A1 - Tanuma, S. A1 - Moon, D.W. A1 - Lee, H.J. A1 - Cho, H.M. A1 - Chen, H.Y. A1 - Wee, A. T. S. A1 - Osipowicz, T. A1 - Pan, J.S. A1 - Jordaan, W.A. A1 - Hauert, R. A1 - Klotz, U. A1 - van der Marel, C. A1 - Verheijen, M. A1 - Tamminga, Y. A1 - Jeynes, C. A1 - Bailey, P. A1 - Biswas, S. A1 - Falke, U. A1 - Nguyen, N.V. A1 - Chandler-Horowitz, D. A1 - Ehrstein, J.R. A1 - Muller, D. A1 - Dura, J.A. T1 - Ultra-thin SiO2 on Si, Part V: Results of a CCQM Pilot Study of Thickness Measurements KW - SiO2 KW - Thin films KW - Thickness KW - XPS KW - Ellipsometry KW - TEM PY - 2003 SN - 1473-2734 SP - 57 pages AN - OPUS4-4118 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Österle, Werner A1 - Urban, Ingrid T1 - Third body formation on brake pads and rotors N2 - The surfaces of a brake pad and rotor were investigated after a run-in period during which a stable coefficient of friction had developed. The Focused Ion Beam Technique (FIB) was used to reveal tribologically induced surface films and for cross-sectional preparation of superficial layers. Additional information was obtained by TEM/EDS of thin lamellae prepared with the FIB and by surface analytical methods (GDOS, XPS and RS). Microscopic contact areas of the pad showed bright contrast in Scanning Ion Microscopy (SIM). This was attributed to severe plastic deformation finally leading to a nanocrystalline microstructure. Metallic particles of the pad, the so-called primary contact areas, were mostly covered with a smooth oxide layer of less than 1 µm thickness. Above this layer a thin (100 nm) partly amorphous film was often observed. The film was not only restricted to the metal particles, but also spread over adjacent regions, suggesting that secondary plateaus had formed. Similar layers and films, although with slightly different composition and structure, were also observed at the surface of the rotor. KW - Friction material KW - Friction layer KW - Friction film KW - Third body KW - Brake PY - 2005 DO - https://doi.org/10.1016/j.triboint.2005.04.021 SN - 0301-679X VL - 39 IS - 5 SP - 401 EP - 408 PB - Butterworth-Heinemann CY - Oxford AN - OPUS4-12309 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Österle, Werner A1 - Li, Pengxi A1 - Nolze, Gert T1 - Influence of surface finishing on residual stress depth profiles of a coarse-grained nickel-base superalloy N2 - Residual stress depth profiles of a cast nickel-base superalloy were measured by regarding the deflections occurring in plate-shaped specimens while successively removing layers from the machined or treated surface by electropolishing. The results are in good agreement with previous findings showing (i) the influence of grinding parameters on the width of so-called white layers, which correspond to steep gradients of residual tensile stress, and (ii) a broad zone of compressive residual stress in the case of shot peening. KW - Superalloy KW - Residual stress KW - Grinding KW - Shot peening PY - 1999 SN - 0921-5093 SN - 1873-4936 VL - 262 IS - 1-2 SP - 308 EP - 311 PB - Elsevier CY - Amsterdam AN - OPUS4-13977 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -