TY - JOUR A1 - Yin, Huajie A1 - Cangialosi, D. A1 - Schönhals, Andreas T1 - Glass transition and segmental dynamics in thin supported polystyrene films: The role of molecular weight and annealing JF - Thermochimica Acta N2 - Broadband dielectric spectroscopy (BDS), specific heat spectroscopy (HCS) and capacitive scanning dilatometry (CSD) are used to study the glass transition and segmental dynamics in thin supported polystyrene (PS) films. Different molecular weights (Mw = 50 kg/mol, Mw = 260 kg/mol, Mw = 1408 kg/mol) and annealing protocols are employed in the study. The segmental dynamics is independent of the film thickness for each Mw in the temperature window of the dielectric measurement. The thermal glass transition temperature, Tg, measured by CSD depends on the film thickness and shows also a dependence on Mw. These observations are explained in terms of the formation of irreversibly adsorbed layer due to chain adsorption on the Al substrates during annealing. KW - Thin polystyrene films KW - Glass transition KW - Segmental dynamics PY - 2013 DO - https://doi.org/10.1016/j.tca.2013.05.034 SN - 0040-6031 SN - 1872-762X VL - 566 SP - 186 EP - 192 PB - Elsevier CY - Amsterdam AN - OPUS4-28736 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Yin, Huajie A1 - Schönhals, Andreas T1 - Glass transition and segmental dynamics of ultrathin poly(bisphenol A carbonate) films T2 - 6th International conference on times of polymers (TOP) and composites N2 - Broadband dielectric spectroscopy (BDS), capacitive scanning dilatometry (CSD) and differential ac-chip calorimetry (DACC) were used to examine the glass transition and segmental dynamics of ultrathin poly(bisphenol A carbonate) (PBAC) films. An increase of Vogel temperature (T0) as well as glass transition temperature (Tg) with decreasing film thickness was observed when the thickness is less than 20 nm. Moreover, the segmental relaxation time at a fixed temperature was found to increase for the aluminium (Al) capped PBAC films (<20 nm) in the BDS measurements, whereas in the DACC measurements no thickness dependency of the segmental dynamics was detected within the experimental error limit for the supported PBAC films (10-55 nm). These properties are discussed in terms of the thin film geometry and the relevant interfacial interaction between the polymer and the substrate. T2 - 6th International conference on times of polymers (TOP) and composites CY - Ischia, Italy DA - 2012-06-10 KW - Ultrathin film KW - Poly(bisphenol A carbonate) KW - Glass transition KW - Aluminium KW - Dielectric thin films KW - Differential scanning calorimetry KW - Permittivity KW - Polymer films PY - 2012 SN - 978-0-7354-1061-9 DO - https://doi.org/10.1063/1.4738399 N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings IS - 1459 SP - 64 EP - 67 AN - OPUS4-26349 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Yin, Huajie A1 - Schönhals, Andreas T1 - Thermal and dynamic glass transition of ultrathin films of homopolymers and a miscible polymer blend N2 - Despite the decade long controversial discussion on the effect of nanometer confinement on the glass transition temperature (Tg) of ultrathin polymer films, there is still no consistent picture. Here, the dynamic calorimetric glass transition of ultrathin films of a blend, which is miscible in the bulk, is directly investigated by specific heat spectroscopy. By a self-assembling process, a nanometer thick surface layer with a higher molecular mobility is formed at the polymer/air interface. By measuring the dynamic calorimetric Tg in dependence on the film thickness, it was shown that the Tg of the whole film was strongly influenced by that nanometer thick surface layer, with a lower Tg. Since the observed thickness dependence of the dynamic Tg is similar to the thickness dependence of the Tg for thin films of homopolymers, it is concluded that also for homopolymer a highly mobile surface layer is relevant for the widely observed Tg depression. T2 - International Young Scientists Forum on Materials Science and Engineering CY - Shanghai, China DA - 01.06.2017 KW - Glass transition KW - Ultrathin polymer films KW - Specific heat spectroscopy PY - 2017 AN - OPUS4-40809 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Yin, Huajie A1 - Chua, Y. Z. A1 - Yang, B. A1 - Schick, C. A1 - Böhning, Martin A1 - Schönhals, Andreas T1 - Probing the glass transition temperature of polymers of intrinsic microporosity (PIMs) by fast scanning calorimeter N2 - High performance polymers of intrinsic microporosity (PIMs) have emerged as novel materials with broad applications from gas separation to electronic devices. Sufficiently rigid, even contorted polymer chains show only limited molecular mobility, therefore undergo inefficient packing and give rise to intrinsic microporosity with pore size generally smaller than 1 nm and BET surface areas larger than 700 m2/g. Further performance optimization and long-term stability of devices incorporating PIMs rely on our understanding of structure-processing-property relationships and physical aging, in which glass transition plays a key role. Up to now no glass transition temperature (Tg) of PIMs could be detected with conventional thermal analysis techniques before degradation. Decoupling the time scales responsible for the glass transition and the thermal decomposition is a reliable strategy to overcome this. This was achieved by employing fast scanning calorimetry (FSC) based on a chip sensor, which is capable to heat and cool a small sample (ng-range) with ultrafast rates of several ten thousand K/s. FSC provides definitive evidence of glass transition of a series of PIMs with a special consideration on the chain rigidity. The determined glass transition temperature of these PIMs follows the order of the rigidity of their backbone structures. FSC provides the first clear-cut experimental evidence of the glass transition of PIM-EA-TB with a Tg of 663 K, PIM-1 of 644 K and PIM-DMDPH-TB of 630 K at a heating rate of 1Χ104 K/s. Local fluctuations are featured in glass transition of highly rigid PIMs. As conformational changes are prevented by the backbone rigidity, the glass transition must rather be assigned to local small scale fluctuations. T2 - American Chemical Society (ACS) National Meeting & Expo 2019 CY - Orlando, FL, USA DA - 31.03.2019 KW - Glass transition KW - Polymers of intrinsic microporosity KW - Fast scanning calorimeter PY - 2019 AN - OPUS4-47806 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -