TY - RPRT A1 - Dorgerloh, Ute A1 - Win, Tin A1 - Erhardt, Ulla A1 - Hofmann, Andrea A1 - Nehls, Irene A1 - Kuhnhardt, Claus A1 - Schultze, Karin A1 - Witt, Angelika T1 - Bilanzierung der Schwefelbelastung im Grundwasser an einem ausgewählten Industriestandort, Berlin N2 - Die Bundesanstalt für Materialforschung und -prüfung (BAM) ist vom Senat für Stadtentwicklung, Berlin, und von der Bundesanstalt für vereinigungsbedingte Sonderaufgaben (BvS) beauftragt worden, die Bilanzierung der Schwefelkomponenten für ein bis drei ausgewählte Grundwasserproben an einem Berliner Industriestandort vorzunehmen. Es handelt sich bei den Boden- und Grundwasserkontaminationen ausnahmslos um industrielle Altlasten. Da der Gehalt an organisch gebundenen Schwefelverbindungen, kolloidalem Schwefel und gelösten Sulfiden für die Dimensionierung von Grundwasseraufbereitungsanlagen (Aktivkohle, Katalysator) von großer Bedeutung ist und am Standort teilweise sehr hohe Schwefelkontaminationen auftreten, sollen vor einem erneuten Ausschreibungsverfahren zur Grundwassersanierung an drei sehr unterschiedlichen, aber für den Standort typischen Grundwassermessstellen entsprechende Bilanzen für die Schwefelbelastung erstellt werden. Dabei sind sowohl die summarischen Kenngrößen wie Summe Gesamtschwefel, ausblasbare (POS) und extrahierbare leicht- und schwerflüchtige organische Schwefelverbindungen und an Aktivkohle adsorbierbare Schwefelverbindungen (AOS) von Interesse, als auch eine Zuordnung der Hauptkontaminationen über ein halbquantitatives GC-MS-Screening. Im Artikel werden die angewendeten Verfahren vorgestellt. Die Ergebnisse werden diskutiert, gegenübergestellt und ihre Belastbarkeit eingeschätzt. T3 - BAM Forschungsberichtreihe - 265 PY - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-1865 SN - 978-3-86509-182-2 SN - 0938-5533 VL - 265 SP - 1 EP - 20 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-186 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Sebastian A1 - Koch, Matthias A1 - Köppen, Robert A1 - Buttler, Sabine A1 - Penk, Sibylle A1 - Mauch, Tatjana A1 - Sommerfeld, Thomas A1 - Witt, Angelika T1 - Correction to: "Development of certified reference materials for the determination of cadmium and acrylamide in cocoa" N2 - The article "Development of certified reference materials for the determination of cadmium and acrylamide in cocoa" was originally published in the journal "Analytical and bioanalytical chemistry" Online First without Open Access. After publication in volume 412, issue 19, page 4659–4668, the authors decided to opt for Open Choice and to make the article an Open Access publication. Therefore, the copyright of the article has been changed to ©The Author(s) 2021 and the article is forthwith distributed under the terms of the Creative Commons Attribution 4.0 International License. PY - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-527908 SN - 1618-2642 SN - 1618-2650 SP - 1 PB - Springer CY - Berlin AN - OPUS4-52790 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Koch, Matthias A1 - Köppen, Robert A1 - Siegel, David A1 - Witt, Angelika A1 - Nehls, Irene T1 - Determination of total sulfite in wine by ion chromatography after in-sample oxidation N2 - Sulfur dioxide (SO2) or sulfites are the most common preservatives used in winemaking. The level of total SO2 is subject to regulation. Currently, the regulatory determination of total SO2 (including sulfites) is done by the optimized Monier–Williams (OMW) method, which includes time-consuming distillation and titration steps. This paper describes the development and application of an alternative, rapid, straightforward, and reliable method for the determination of total sulfite in wine. In this method, a simple oxidation step using alkaline hydrogen peroxide (H2O2) solution is followed by ion chromatographic (IC) analysis of sulfate coupled with conductometric detection. Thirteen wines were analyzed in order to compare the in-sample oxidation method with the OMW-procedure. A t-test revealed satisfying compliance regarding sample preparation, i.e., alkaline H2O2 treatment and acidic distillation (OMW method). Comparable results were also obtained between IC analysis and acid/base titration. Our results indicate that the novel method (limit of quantification: 4 mg SO2 L-1) is well suited for the cost-efficient monitoring of regulatory limits. KW - Sulfur dioxide KW - Wine analysis KW - Hydrogen peroxide oxidation KW - IC KW - Optimized Monier-Williams method PY - 2010 U6 - https://doi.org/10.1021/jf102086x SN - 0021-8561 SN - 1520-5118 VL - 58 IS - 17 SP - 9463 EP - 9467 PB - American Chemical Society CY - Columbus, Ohio AN - OPUS4-21912 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Koch, Matthias A1 - Labsch, Erika A1 - Köppen, Robert A1 - Witt, Angelika A1 - Nehls, Irene T1 - Feuchtebestimmung in Lebensmitteln durch coulometrische Karl-Fischer-Titration nach thermischer Wasserfreisetzung KW - KFT KW - Wassergehalt KW - Standardaddition PY - 2010 SN - 0012-0413 SN - 1869-2214 VL - 106 IS - Mai SP - 251 EP - 254 PB - Wiss. Verl.-Ges. CY - Stuttgart AN - OPUS4-21351 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Recknagel, Sebastian A1 - Koch, Matthias A1 - Köppen, Robert A1 - Buttler, Sabine A1 - Penk, Sibylle A1 - Mauch, Tatjana A1 - Sommerfeld, Thomas A1 - Witt, Angelika T1 - Development of certified reference materials for the determination of cadmium and acrylamide in cocoa N2 - Since 1 January 2019 a maximum content of 0.6 mg kg−1 cadmium (Cd) in cocoa powder sold to the final consumer or as an ingredient in sweetened cocoa powder sold to the final consumer (drinking chocolate) is set by the Commission Regulation (EU) No. 488/2014. Monitoring compliance with the specified limit value requires analytical measuring methods and reference materials for quality control. However, suitable certified reference materials intended for quality assurance and quality control purposes are still lacking. Therefore, three cocoa reference materials (ERM®-BD513, ERM®-514 and ERM®-515) were developed according to the requirements of ISO 17034 and the recommendations of ISO Guide 35. The whole process of reference material development, including material preparation, assessment of homogeneity and stability, characterisation and value assignment is presented. The assignment of the certified mass fractions was based upon an interlaboratory comparison study involving 19 expert laboratories for Cd and 12 laboratories for acrylamide. The certified mass fractions and expanded uncertainties (k = 2) of the reference materials were (0.181 ± 0.009) mg kg−1 Cd (ERM®-BD513), (0.541 ± 0.024) mg kg−1 Cd (ERM®-BD514) and (0.690 ± 0.029) mg kg−1 Cd (ERM®-BD515). Acrylamide contents are given for information. KW - Certified reference material KW - Quality assurance KW - Cocoa KW - Cadmium KW - Acrylamide KW - Food analysis PY - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-508656 SN - 1618-2642 SN - 1618-2650 VL - 412 IS - 19 SP - 4659 EP - 4668 PB - Springer CY - Berlin AN - OPUS4-50865 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Piechotta, Christian A1 - Iznaguen, Hassan A1 - Traub, Heike A1 - Feldmann, Ines A1 - Köppen, Robert A1 - Witt, Angelika A1 - Jung, Christian A1 - Becker, Roland A1 - Oleszak, Katrin A1 - Bücker, Michael A1 - Urban, Klaus A1 - Reger, Christian A1 - Ostermann, Markus T1 - Bewitterungsszenarien im Vergleich – Veränderungen in der Oberflächenmorphologie von Polypropylen (PP) und Polystyrol (PS) unter dem Aspekt des Austrags von polybromierten Flammschutzmitteln N2 - Gegenstand der vorzustellenden Arbeiten ist die Prüfung der Umwelt-beständigkeit und -verträglichkeit von Materialien und Produkten hinsichtlich der Emission von potenziellen Schadstoffen in die Umwelt. Hierzu werden chemisch-physikalische Einflüsse (Bewitterung) und mikrobielle Beanspruchungen an Modellmaterialien evaluiert. So werden die Freisetzungsraten von Schadstoffen in Abhängigkeit der Beanspruchung beschrieben. Als Modellmaterialien kommen die Polymere Polystyrol (PS) und Polypropylen (PP) zum Einsatz. Synergistische Effekte der Bewitterungsparameter und der mikrobiologischen Beanspruchung sollen dabei ebenso betrachtet werden, wie die gezielte Alterung. Auch findet eine Beschreibung des Verhaltens der ausgetragenen Schadstoffe in den Umweltkompartimenten Boden oder Wasser statt. Hier sind mit Hilfe der zu entwickelnden Screening- und non-Target-Analyseverfahren die Transformation und der Metabolismus durch Mikroorganismen zu beschreiben. Aus den Ergebnissen sollen Korrelationen zwischen den künstlichen Alterungsverfahren und realen Szenarien abgeleitet werden. T2 - 47. Jahrestagung der GUS CY - Blankenloch-Stutensee, Germany DA - 21.03.2018 KW - Schadstoffaustrag KW - Umweltsimulation KW - Bewitterung PY - 2018 SN - 978-981-18507-2-7 VL - 47 SP - 115 EP - 128 AN - OPUS4-49802 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -