TY - CONF A1 - Weltschev, Margit T1 - Luftverunreinigung und Materialschäden T2 - Soziale Kosten der Energienutzung: Externe Kosten heute - Betriebskosten morgen (VDI-Berichte) N2 - Die im In- und Ausland vorliegenden Forschungsarbeiten zur Kostenabschätzung der immissionsbedingten Materialschäden beruhen auf zwei ökonomischen Bewertungsverfahren. Bewertungsgrundlage des einen Verfahrens sind die in Labor- und Freibewitterungsversuchen ermittelten physikalisch-chemischen Dosis-Wirkungs-Beziehungen zwischen dem Schadstoffgehalt der Luft und den schadensanfälligen Materialien. Die andere Methode geht von den Unterschieden im Instandsetzungverhalten in Abhängigkeit vom Standort (Industrie-, Stadt- und Landatmosphäre) der Sachgüter aus. T2 - Soziale Kosten der Energienutzung: Externe Kosten heute - Betriebskosten morgen CY - Mannheim, Germany DA - 05.11.1991 KW - Luftverunreinigung KW - Materialschäden PY - 1991 SN - 3-18-090927-7 SN - 0083-5560 VL - 927 SP - 19 EP - 33 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-51927 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weltschev, Margit A1 - Heinz, I. T1 - Bau- und Materialschäden durch atmosphärische Korrosion in der Bundesrepublik Deutschland JF - Staub, Reinhaltung der Luft N2 - Die ökonomische Bewertung der immissionsbedingten Materialschäden der Sachgütergruppen Freileitungsmaste, Brücken der Bundesautobahnen, Eisenbahnbrücken und -fahrleitungsmaste, fernmeldetechnische Einrichtungen der Deutschen Bundespost, Industrieanlagen, Wohngebäude und Denkmäler basiert auf sogenannten „Stock-at-risk“-Informationen, Dosis-Wirkungs-Funktionen der der Atmosphäre ausgesetzten Werkstoffe und auf in der Praxis vorliegenden Erfahrungswerten über Zeitintervalle der Erneuerung der Korrosionsschutzsysteme und Bauteile. In jenen Fällen, in denen der immissionsbedingte Anteil am Gesamtschaden noch nicht eindeutig nachgewiesen werden konnte, werden die Forschungslücken aufgezeigt bzw. Modellrechnungen durchgeführt. KW - Bauschäden KW - Materialschäden KW - Atmosphärische Korrosion PY - 1991 SN - 0039-0771 VL - 51 SP - 329 EP - 333 PB - Springer CY - Berlin AN - OPUS4-51928 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Weltschev, Margit ED - Hohmeyer, O. ED - Ottinger, R. L. T1 - Economic Losses to society Due to Material Damages of Environmental Pollution in the Federal Republic of Germany BT - Analysis and Internalization T2 - External Environmental Costs of Electric Power N2 - In Order to be able to assess the damage caused to materials by acid deposition the first question to be considered is: Which materials are affected? A wide ränge of materials are exposed to the extemal environment. These materials have different susceptibility to attack by acid rain and different stock at risk in the Federal Republic of Germany. KW - Economic Losses KW - Environmental Pollution PY - 1991 SN - 3-540-54184-5 SP - 25 EP - 35 PB - Springer CY - Berlin AN - OPUS4-51494 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weltschev, Margit T1 - Emissionsfrei auch im Leckagefall / Doppelwandige Behälter für die sichere Gefahrstofflagerung JF - Chemie-Anlagen + Verfahren KW - Leckage KW - Gefahrstofflagerung KW - Doppelwandbehälter PY - 1999 SN - 0009-2800 IS - 8 SP - 28 EP - 30 PB - Konradin-Verl. CY - Leinfelden AN - OPUS4-744 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weltschev, Margit T1 - Pitting Prävention JF - Gefährliche Ladung PY - 2001 SN - 0016-5808 VL - 46 IS - 10 SP - 45 EP - 47 PB - Storck CY - Hamburg AN - OPUS4-1208 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weltschev, Margit T1 - Hochlegierte Sonderedelstähle und Nickelbasislegierungen für den Behälterbau JF - Technische Überwachung PY - 2001 SN - 1434-9728 SN - 1436-4948 SN - 0372-2457 SN - 0376-1185 VL - 42 IS - 7-8 SP - 55 EP - 57 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-1209 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Einsatz von höherlegierten Sonderedelstählen und Nickelbasislegierungen im Tankbau T2 - Tagungsband der Gefahrgut-Technik-Tage Berlin 2002 "Innovative Tanktechnik" T2 - Gefahrgut-Technik-Tage Berlin 2002 "Innovative Tanktechnik" CY - Berlin, Deutschland DA - 2002-11-14 PY - 2002 PB - Storck-Akademie CY - Hamburg AN - OPUS4-1787 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weltschev, Margit T1 - Von Pittings und Potenzialen II JF - Gefährliche Ladung PY - 2002 SN - 0016-5808 VL - 47 IS - 7 SP - 33 EP - 34 PB - Storck CY - Hamburg AN - OPUS4-1453 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weltschev, Margit A1 - Bäßler, Ralph T1 - Höherlegieren gegen Korrodieren - Besondere Stähle und Legierungen für Tanks JF - Gefährliche Ladung PY - 2002 SN - 0016-5808 VL - 47 IS - 11 SP - 18 EP - 20 PB - Storck CY - Hamburg AN - OPUS4-1635 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weltschev, Margit T1 - Super steels JF - Hazardous cargo bulletin PY - 2002 SN - 0143-6864 VL - 10 SP - 64 EP - 66 PB - Intrapr. Ltd. CY - London AN - OPUS4-1660 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weltschev, Margit T1 - Von Pittings und Potenzialen I JF - Gefährliche Ladung PY - 2002 SN - 0016-5808 VL - 47 IS - 6 SP - 25 EP - 26 PB - Storck CY - Hamburg AN - OPUS4-1410 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Einsatz von höherlegierten Sonderedelstählen und Nickelbasislegierungen im Tankbau T2 - Gefahrgut-Technik-Tage Berlin 2002 T2 - Gefahrgut-Technik-Tage Berlin 2002 CY - Berlin, Germany DA - 2002-11-14 PY - 2002 AN - OPUS4-3682 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weltschev, Margit A1 - Bäßler, Ralph T1 - Tankwerkstoffe für den Gefahrguttransport - Bewertung der Beständigkeit der "Superaustenite" X1NiCrMoCuN25 20 7 und X1NiCrMoCu32 28 7 sowie der Nickellegierung NiCr23Mo16Al für den Tankbau JF - Technische Überwachung PY - 2003 SN - 1434-9728 SN - 1436-4948 SN - 0372-2457 SN - 0376-1185 VL - 44 IS - 11-12 SP - 48 EP - 52 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-2813 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Assessment of the corrosion resistance of metallic tank materials in the BAM-list - Requirements for tanks for the transport of dangerous goods T2 - Abstracts of the lecture groups of the 27th International Exhibition-Congress on Chemical Engineering, Environmental Protection and Biotechnology T2 - 27th International Exhibition-Congress on Chemical Engineering, Environmental Protection and Biotechnology ; 27th ACHEMA 2003 CY - Frankfurt am Main, Germany DA - 2003-05-19 PY - 2003 SP - 183 PB - DECHEMA, Ges. für Chemische Technik und Biotechnologie CY - Frankfurt am Main AN - OPUS4-2535 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weltschev, Margit T1 - Stichwort "Korrosion": Die Bewertungskriterien für die Beständigkeit von metallischen Tankwerkstoffen JF - Hoyer Journal PY - 2003 IS - März SP - 4 PB - HOYER GmbH CY - Hamburg AN - OPUS4-2548 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Assessment of the Corrosion Resistance of Metallic Tank Materials in the BAM-List - Requirements for Tanks for the Transport of Dangerous Goods T2 - 27th International Exhibition-Congress on Chemical Engineering, Environmental Protection and Biotechnology, Abstract of the lecture groups, Materials Technology T2 - 27th International Exhibition-Congress on Chemical Engineering, Environmental Protection and Biotechnology, Abstract of the lecture groups, Materials Technology CY - Frankfurt am Main, Germany DA - 2003-05-19 PY - 2003 AN - OPUS4-3310 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Bäßler, Ralph A1 - Werner, H. A1 - Behrens, R. T1 - Assessment of the corrosion resistance of high-alloyed metallic tank materials in the BAM-list-requirements for tanks for the transport of dangerous goods T2 - EUROCORR 2003 - Bridge between academia and industry T2 - EUROCORR 2003 CY - Budapest, Hungary DA - 2003-09-28 KW - BAM-List KW - Dangerous goods KW - Compatibility evaluations KW - High-alloyed metallic tank materials KW - Corrosion tests PY - 2003 N1 - Serientitel: EFC-Event – Series title: EFC-Event IS - 261 SP - 1 EP - 12 PB - European Federation of Corrosion CY - Budapest AN - OPUS4-2683 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weltschev, Margit T1 - Schuld an Korrosion JF - Gefährliche Ladung PY - 2003 SN - 0016-5808 VL - 48 IS - 2 SP - 12 EP - 14 PB - Storck CY - Hamburg AN - OPUS4-2384 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Bäßler, Ralph A1 - Werner, H. A1 - Behrens, R. T1 - Assessment of the corrosion resistance of high-alloyed metallic tank materials in the BAM-List - Requirements for Tanks for the Transport of Dangerous Goods T2 - EUROCORR 2003 - The European Corrosion Congress T2 - EUROCORR 2003 - The European Corrosion Congress CY - Budapest, Hungary DA - 2003-09-28 PY - 2003 AN - OPUS4-4268 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Assessment of the corrosion resistance of metallic tank materials in the BAM-List-Requirements for Tanks for the Transport of Dangerous Goods T2 - ACHEMA 2003, "27. Internationaler Ausstellungskongreß für Chemische Technik Umweltschutz und Biotechnologie", BAM-Messestand T2 - ACHEMA 2003, "27. Internationaler Ausstellungskongreß für Chemische Technik Umweltschutz und Biotechnologie", BAM-Messestand CY - Frankfurt am Main, Germany DA - 2003-05-19 PY - 2003 AN - OPUS4-5277 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Bäßler, Ralph A1 - Werner, H. A1 - Behrens, R. T1 - Suitability of More Noble Materials for Tanks for Transport of Dangerous Goods T2 - Corrosion 2004 T2 - Corrosion 2004 ; 59th NACExpo 2004 ; 59th Annual conference & exposition. NACE International - The Corrosion Society CY - New Orleans, LA, USA DA - 2004-03-28 KW - BAM-List KW - Dangerous goods KW - Compatibility evaluations KW - High-alloyed metallic tank materials KW - Corrosion tests PY - 2004 IS - CD-ROM, Paper 04228 SP - 04228-1-04228-13 PB - NACE International CY - New Orleans, La. AN - OPUS4-3476 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weltschev, Margit A1 - Bäßler, Ralph A1 - Werner, H. A1 - Behrens, R. T1 - Suitability of High-Alloyed Metallic Materials for Tanks for the Transport of Dangerous Goods - BAM-List T2 - Loss prevention 2004 : 11th International Symposium Loss Prevention and Safety Promotion in the Process Industries T2 - 11th International Symposium "Loss Prevention 2004" CY - Prague, Czech Republic DA - 2004-05-31 KW - BAM-List KW - Dangerous goods KW - Compatibility evaluations KW - High-alloyed metallic tank materials KW - Corrosion tests KW - Korrosion KW - Höherlegierte metallische Tankwerkstoffe KW - BAM-Liste PY - 2004 SN - 80-0201574-6 SP - PG4478 EP - PG4489 PB - Ceská Spolecnost Chemického Inzenýrství CY - Prag AN - OPUS4-3576 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weltschev, Margit A1 - Alves, H. T1 - Tanks for all seasons JF - Hazardous cargo bulletin KW - Beständigkeit KW - Höherlegierte Tankwerkstoffe KW - Gefahrgüter KW - BAM-Liste PY - 2004 SN - 0143-6864 IS - August SP - 18 EP - 19 PB - Intrapr. Ltd. CY - London AN - OPUS4-4422 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Bäßler, Ralph T1 - Bewertung der Beständigkeit von hochlegierten Sonderedelstählen und Nickellegierungen für den Transport von Gefahrgütern T2 - Korrosionsschutzseminar "Hochlegierte nichtrostende Stähle und Nickellegierungen in der Prozesstechnik" T2 - Korrosionsschutzseminar "Hochlegierte nichtrostende Stähle und Nickellegierungen in der Prozesstechnik" CY - Dresden, Deutschland DA - 2004-10-06 KW - Korrosionsbeständigkeit KW - Hochlegierte Tankwandungswerkstoffe KW - Gefahrgüter KW - BAM-Liste PY - 2004 SP - 1 EP - 10 CY - Dresden AN - OPUS4-4423 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Bäßler, Ralph A1 - Werner, H. A1 - Behrens, R. T1 - Suitability of More Noble Materials for Tanks for Transport of Dangerous Goods T2 - Corrosion 2004, NACE International T2 - Corrosion 2004, NACE International CY - New Orleans, LA, USA DA - 2004-03-28 PY - 2004 AN - OPUS4-5131 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Bäßler, Ralph A1 - Werner, H. A1 - Alves, H. T1 - Beständigkeitsbewertung von hochlegierten Werkstoffen für den Einsatz als Tankwandungswerkstoffe zum Transport von Gefahrgütern und wasserverunreinigenden Stoffen T2 - Werkstoffwoche München T2 - Werkstoffwoche München CY - Munich, Germany DA - 2004-09-20 PY - 2004 AN - OPUS4-5133 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Bäßler, Ralph T1 - Bewertung der Beständigkeit von hochlegierten Sonderedelstählen und Nickellegierungen für den Transport von Gefahrgütern T2 - Korrosionsschutzseminar: Hochlegierte Nichtrostende Stähle und Nickellegierungen in der Prozesstechnik T2 - Korrosionsschutzseminar: Hochlegierte Nichtrostende Stähle und Nickellegierungen in der Prozesstechnik CY - Dresden, Germany DA - 2004-10-06 PY - 2004 AN - OPUS4-5135 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Beständigkeitsbewertungen von Behälterwerkstoffen T2 - Erfahrungsaustausch mit der Polizei Niedersachsen T2 - Erfahrungsaustausch mit der Polizei Niedersachsen CY - Berlin, Germany DA - 2004-10-26 PY - 2004 AN - OPUS4-5137 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Innovative korrosionsbeständige höherlegierte Tankwerkstoffe T2 - Gefahrgut-Technik-Tage Berlin 2004 T2 - Gefahrgut-Technik-Tage Berlin 2004 CY - Berlin, Germany DA - 2004-11-25 PY - 2004 AN - OPUS4-5138 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Innovative korrosionsbeständige höherlegierte Tankwerkstoffe T2 - Tagungsband der 7. Gefahrgut-Technik-Tage Berlin "Innovative Tanktechnik" T2 - 7. Gefahrgut-Technik-Tage (GTT) CY - Berlin, Deutschland DA - 2004-11-25 PY - 2004 VL - 7 SP - 52 EP - 60 PB - Storck CY - Hamburg AN - OPUS4-4844 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Innovative korrosionsbestätige höherlegierte Tankwerkstoffe T2 - Gefahrgut-Technik-Tage - Innovative Tanktechnik, Risiken, Normung, Entwicklunen T2 - Gefahrgut-Technik-Tage - Innovative Tanktechnik, Risiken, Normung, Entwicklunen CY - Berlin, Germany DA - 2004-11-25 PY - 2004 AN - OPUS4-4875 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Bäßler, Ralph A1 - Werner, H. A1 - Alves, H. A1 - Behrens, R. T1 - Use of Corrosion Resistant High-Alloyed Metallic Materials for Transport Tanks of Dangerous Goods T2 - Proceedings of the Stainless Steel World 2005 Conference T2 - Stainless Steel World 2005 Conference CY - Maastricht, The Netherlands DA - 2005-11-08 KW - BAM-List KW - Dangerous goods KW - Compatibility evaluations KW - High-alloyed metallic tank materials KW - Corrosion tests PY - 2005 SP - P5003 (6 pages) PB - KCI Publ. CY - Masstricht AN - OPUS4-11254 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Bäßler, Ralph A1 - Werner, H. A1 - Alves, H. A1 - Behrens, R. T1 - Use of corrosion resistant high-alloyed metallic materials for transport tanks of dangerous goods and water-polluting substances T2 - EUROCORR 2005 - Proceedings N2 - In Germany the “BAM-List – Requirements for Tanks for the Transport of Dangerous Goods” is the basis for substance-related prototype approvals for tank containers designed for the carriage of dangerous goods. Such approval is undertaken by the Federal Institute for Materials Research and Testing (BAM). Compatibility evaluations of selected metallic material groups as well as of polymeric gasket and lining materials under the influence of dangerous goods and water-polluting substances are published in section 5 of the BAM-List. According to the relevant regulations for rail, road and sea transportation a compulsory internal inspection after certain intervals is required. The required corrosion resistance depends on the length of the inspection interval. There is a large number of dangerous goods with a high corrosivity to metals, where the standard steels are not corrosion resistant. Chemical companies, transportation providers and tank producers need tanks made of corrosion-resistant materials in order to protect the tank shell and prevent contamination of high-value cargo as well as the environment. One solution is to line the tank with a polymeric material, an alternative solution to corrosion problems is the application of high-alloyed materials. Only a narrow limited number of corrosion test results of these high-alloyed materials under the influence of corrosive dangerous goods are available. In order to change this situation and include the superaustenitic steels X1NiCrMoCuN25-20-7 (Alloy 926), X1NiCrMoCu32-28-7 (Alloy 31) and the nickel-based alloy NiCr23Mo16Al (Alloy 59) in the BAM-List, BAM, IKS Dresden and ThyssenKrupp VDM started an comprehensive test program with welded specimens made. The program comprises corrosion resistance evaluations of the high-alloyed materials in substances representing 12 major groups of corrosive dangerous goods (e.g. inorganic halogenides, organic acidic halogenides, halogenic carbonic acids, chlorosilanes, chlorates, perchlorates, chlorites, hypochlorites and hydrogen sulphates). The test results, presented in this paper, will be included in the upcoming 8th edition of the BAM-List and therefore available for the costumer. T2 - EUROCORR 2005 CY - Lisbon, Portugal DA - 2005-09-04 KW - BAM-List KW - Dangerous goods KW - Compatibility evaluations KW - High-alloyed metallic tank PY - 2005 SP - Paper 010, 1 EP - 11 PB - Fundação para a Ciência e a Tecnologia CY - Lisbon AN - OPUS4-11255 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Bäßler, Ralph A1 - Werner, H. A1 - Alves, H. A1 - Behrens, R. T1 - Use Corrosion resistant High-Alloyed Metallic Material for Transport Tanks of Dangerous Goods and Water-Polluting Substances T2 - EUROCORR 2005 T2 - EUROCORR 2005 CY - Lisbon, Portugal DA - 2005-09-04 PY - 2005 AN - OPUS4-10827 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Bäßler, Ralph A1 - Alves, H. A1 - Werner, H. T1 - Use of Corrosion Resistant High-Alloyed Metallic Materials for Transport Tanks of Dangerous Goods T2 - Stainless Steel World Konferenz & Expo 2005 T2 - Stainless Steel World Konferenz & Expo 2005 CY - Maastricht, Netherlands DA - 2005-11-08 PY - 2005 AN - OPUS4-11222 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Beständigkeitsbewertungen von Werkstoffen für den Transport von Gefahrgütern durch die BAM-Liste. T2 - GfKORR-Seminar: Auswahl korrosionsbeständiger Werkstoffe für den industriellen Einsatz T2 - GfKORR-Seminar: Auswahl korrosionsbeständiger Werkstoffe für den industriellen Einsatz CY - Iserlohn, Germany DA - 2005-11-17 PY - 2005 AN - OPUS4-11224 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Beständigkeitsbewertungen von Werkstoffen für den Transport von Gefahrgütern durch die BAM-Liste T2 - Bericht vom GfKORR-Seminar: Auswahl korrosionsbeständiger Werkstoffe für den industriellen Einsatz T2 - GfKORR-Seminar: Auswahl korrosionsbeständiger Werkstoffe für den industriellen Einsatz CY - Iserlohn, Deutschland DA - 2005-11-17 KW - Stoffbezogene Baumusterzulassung KW - Gefahrgüter KW - Metallische Tankwerkstoffe KW - Polymere Dichtungs-, Beschichtungs- und Auskleidungswerkstoffe KW - BAM-Liste KW - Bewertung der Korrosionsbeständigkeit PY - 2005 SP - - PB - Fachhochschule Südwestfalen - Hochschule für Technik und Wirtschaft CY - Iserlohn AN - OPUS4-11600 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weltschev, Margit A1 - Bäßler, Ralph T1 - Use of alloy 59 for the transport of highly corrosive dangerous goods JF - Advanced materials research N2 - Alloy 59 (NiCr23Mo16Al) with a lot of chromium, molybdenum and nickel possesses excellent resistance not only to reducing but also oxidizing chemicals. Both the Nickel alloy 59 and the superaustenitic steel alloy 31 have already been used as shell materials for tank vehicles or tank containers. Use of these alloys allows the transport of a signifi-cantly more wider variety of chemicals and, especially, waste mixtures than the use of common aus-tenitic steels. Another advantage is the extension of test intervals of for transport tanks. In Germany the 'BAM-List – Requirements for Tanks for the Transport of Dangerous Goods' is the basis for substance-related prototype approvals for tank containers designed for the carriage of dangerous goods issued by the Federal Institute for Materials Research and Testing (BAM). Com-patibility evaluations of selected metallic material groups as well as polymeric gasket and lining materials under the influence of approximately 7000 dangerous goods and water-polluting sub-stances are published in the BAM-List. Alloy 59 belongs to the group of metallic materials in the BAM-List. Due to the large number of dangerous goods in the BAM-List BAM, IKS Dresden and ThyssenKrupp VDM performed a comprehensive corrosion test programme with welded specimens of the nickel alloy 59 and the superaustenitic steels alloy 926 and alloy 31 in the period 2002 - 2010. Especially In particular alloy 59 and alloy 31 were exposed to a large number of corrosive sub-stances such as various mixtures of both nitric acid/sulphuric acid and nitric acid/phosphoric acid at 55 °C. Other corrosive test substances were different organic and inorganic halogenides, peroxyace-tic acid and molten substances. In the case of molten chemicals such as monochloroacetic acid the test temperature was increased to more than 100 °C. The test results presented in this paper are al-ready included in the 10th edition of the BAM-List and, therefore, available to the customer. KW - Nickel alloy KW - Transport tanks of dangerous goods KW - Proof of compatibility KW - Transporttankwerkstoffe KW - Nickelbasislegierung KW - Korrosionstest KW - Korrosive Medien KW - BAM-Liste PY - 2005 DO - https://doi.org/10.4028/www.scientific.net/AMR.278.581 SN - 1022-6680 SN - 1662-8985 VL - 278 SP - 581 EP - 586 PB - Trans Tech Publ. CY - Zurich AN - OPUS4-24014 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Weltschev, Margit A1 - Bäßler, Ralph T1 - Beständigkeit von hochlegierten Sonderedelstählen und Nickelbasislegierungen als Tankwandungswerkstoffe für Behälter zum Transport von Gefahrgütern und wassergefährdenden Stoffen N2 - BAM, IKS Dresden und ThyssenKrupp VDM haben ein umfangreiches Versuchsprogramm mit geschweißten Werkstoffprüfblechen durchgeführt, um neue Erkenntnisse über das Korrosionsverhalten der Superaustenite und der Nickelbasislegierung zu gewinnen und um diese Bewertungen im Abschnitt 5 der BAM-Liste zu berücksichtigen. Das Versuchsprogramm umfasste Korrosionsbeständigkeitsbewertungen der drei höherlegierten Werkstoffe in Stoffen aus 12 Gruppen von korrosiven Gefahrgütern, wie z. B. anorganische Halogenide, organische Säurehalogenide, Halogencarbonsäuren, Chlorsilane, Chlorate, Perchlorate, Chlorite, Hypochlorite, Hydrogensulfate und Nitriersäuren. T3 - BAM Forschungsberichtreihe - 276 PY - 2006 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1754 SN - 978-3-86509-482-1 SN - 0938-5533 VL - 276 SP - 1 EP - 207 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-175 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Bäßler, Ralph A1 - Alves, H. A1 - Behrens, R. A1 - Werner, H. T1 - Corrosion-resistant high-alloyed metallic materials for the transport of corrosive dangerous goods in tanks T2 - CORROSION 2006 NACE International T2 - CORROSION 2006 NACE International CY - San Diego, CA, USA DA - 2006-03-12 PY - 2006 AN - OPUS4-12268 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Bäßler, Ralph A1 - Werner, H. A1 - Alves, H. A1 - Behrens, R. T1 - Corrosion-resistant higher-alloyed metallic materials for the transport of corrosive dangerous goods in tanks T2 - Proceedings of CORROSION 2006 T2 - CORROSION 2006 CY - San Diego, CA, USA DA - 2006-03-12 KW - BAM-List KW - Dangerous goods KW - High-alloyed metallic tank materials KW - Corrosion tests KW - Korrosionsbeständigkeit KW - Tankwerkstoffe KW - Korrosionsuntersuchungen KW - Höherlegierte metallische Werkstoffe KW - BAM-Liste PY - 2006 SP - 06688/1 EP - 06688/12 PB - NACE CY - San Diego AN - OPUS4-12281 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Urban, Klaus A1 - Weltschev, Margit A1 - Blümel, Peter T1 - Viele Hürden zu meistern JF - Gefährliche Ladung KW - Chemische Verträglichkeit KW - Verpackungsmaterial KW - PE-HD KW - Biozide KW - Verträglichkeitsnachweis KW - Standardflüssigkeiten KW - Assimilierungsliste PY - 2006 SN - 0016-5808 VL - 51 IS - 6 SP - 18 EP - 20 PB - Storck CY - Hamburg AN - OPUS4-12531 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weltschev, Margit T1 - Beständigkeitsbewertungen von Behälterwerkstoffen JF - Gefahrgut-Profi KW - Metallische Behälterwerkstoffe KW - Polymerwerkstoffe KW - Beständigkeit PY - 2006 SN - 0941-6080 VL - 16 IS - 4 SP - 26 EP - 28 PB - Verl. TÜV Rheinland CY - Köln AN - OPUS4-12670 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Beständigkeitsbewertung von Tank- und Behälterwerkstoffen T2 - Seminar: Ausgewählte Kapitel der Sicherheitstechnik/Materialkunde: Werkstoffe und Fertigungstechnik T2 - Seminar: Ausgewählte Kapitel der Sicherheitstechnik/Materialkunde: Werkstoffe und Fertigungstechnik CY - Wuppertal, Germany DA - 2006-12-18 PY - 2006 AN - OPUS4-14338 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Bäßler, Ralph T1 - Use of corrosion-resistant higher-alloyed metallic materials for the transport of dangerous goods in tanks T2 - ACHEMA 2006 T2 - ACHEMA 2006 CY - Frankfurt am Main, Germany DA - 2006-05-15 PY - 2006 AN - OPUS4-14017 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Beständigkeitsbewertungen von Tank- und Behälterwerkstoffen in der Datenbank Gefahrgut und in der BAM-Liste T2 - UIP-Reinheitsschlüssel, Alstom LHB T2 - UIP-Reinheitsschlüssel, Alstom LHB CY - Paris, France DA - 2007-05-08 PY - 2007 AN - OPUS4-14945 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Bäßler, Ralph A1 - Werner, H. A1 - Alves, H. T1 - Evaluation of the resistance of alloy 31 and alloy 59 for the transport of mixed acids in tanks T2 - EUROCORR 2007 - Progress by corrosion control T2 - EUROCORR 2007 CY - Freiburg im Breisgau, Germany DA - 2007-09-09 KW - Korrosionsbeständigkeit KW - Höherlegierte Werkstoffe KW - Mischsäuren KW - BAM-Liste KW - BAM-List KW - Acid corrosion KW - High-alloyed stainless steel KW - Nickel-base alloy KW - Corrosion test PY - 2007 N1 - Serientitel: EFC-Event – Series title: EFC-Event IS - 289 SP - 1 EP - 10 PB - DECHEMA CY - Frankfurt am Main AN - OPUS4-15853 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Vermeidung von Korrosionsschäden beim Transport von Gefahrgütern durch Einsatz beständiger Werkstoffe T2 - Seminar "Ausgewählte Kapitel der Sicherheitstechnik/Materialkunde", Bergische Universität T2 - Seminar "Ausgewählte Kapitel der Sicherheitstechnik/Materialkunde", Bergische Universität CY - Wuppertal, Germany DA - 2007-07-05 PY - 2007 AN - OPUS4-16292 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Übertragbarkeit von Materialkennwerten auf das Baumusterverhalten von Verpackungen aus HDPE T2 - Gefahrgut-Technik-Tage Berlin T2 - Gefahrgut-Technik-Tage Berlin CY - Berlin, Germany DA - 2007-11-22 PY - 2007 AN - OPUS4-16293 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weltschev, Margit T1 - Prevention of damages by correct selection of materials T2 - Loss prevention 2007 T2 - 12th International Symposium on Loss Prevention and Safety Promotion in the Process Industries CY - Edinburgh, Scotland, UK DA - 2007-05-22 KW - Dangerous goods KW - Transport KW - Storage KW - Tanks KW - Resistance KW - Metallic materials KW - Polymeric materials PY - 2007 SN - 978-0-85295-508-6 SN - 0307-0492 N1 - Serientitel: IChemE symposium series – Series title: IChemE symposium series IS - 153 SP - 1 EP - 5 PB - IChemE CY - Rugby, Warwickshire AN - OPUS4-14857 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Bäßler, Ralph T1 - Bewertung der Beständigkeit von hochlegierten Sonderedelstählen und Nickellegierungen für den Transport von Gefahrgütern T2 - 8. Dresdener Korrosionsschutztage - Hochlegierte Stähle und Nickellegierungen für den Industrieanlagenbau T2 - 8. Dresdener Korrosionsschutztage CY - Dresden, Deutschland DA - 2007-10-24 KW - Korrosionsbeständigkeit KW - Korrosionsuntersuchungen KW - Sonderedelstähle KW - Nickellegierungen KW - Gefahrgüter KW - BAM-Liste PY - 2007 IS - (Teil 1) SP - 1 EP - 16 CY - Dresden AN - OPUS4-16077 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Bewertung der Beständigkeit von hochlegierten Sonderedelstählen und Nickellegierungen für den Transport von Gefahrgütern T2 - Hochlegierte Stähle und Nickellegierungen für den Industrieanlagenbau T2 - Hochlegierte Stähle und Nickellegierungen für den Industrieanlagenbau CY - Dresden, Germany DA - 2007-10-24 PY - 2007 AN - OPUS4-16057 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Niebergall, Ute T1 - Übertragbarkeit von Materialkennwerten auf das Baumusterverhalten von Verpackungen aus HDPE T2 - Gefahrgut-Technik-Tage Berlin 2007 "Gefahrgut-Verpackungen", 22.- 24.11.2007, Berlin T2 - Gefahrgut-Technik-Tage Berlin 2007 "Gefahrgut-Verpackungen" CY - Berlin, Deutschland DA - 2007-11-22 KW - BAM-GGR 003 KW - Verpackungen KW - HDPE KW - Formstoffkennwerte KW - Baumusterprüfungen KW - Versagensgrenzen PY - 2007 SP - 1 EP - 13 CY - Berlin AN - OPUS4-16273 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Beständigkeitsbewertungen von Tank- und Behälterwerkstoffen in der Datenbank Gefahrgut und in der BAM-Liste T2 - Vortrag an der Bergischen Universität Wuppertal im FB Sicherheitstechnik im Seminar, ausgewählte Kapitel der Sicherheitstechnik/Materialkunde: Werkstoffe und Fertigungstechnik T2 - Vortrag an der Bergischen Universität Wuppertal im FB Sicherheitstechnik im Seminar, ausgewählte Kapitel der Sicherheitstechnik/Materialkunde: Werkstoffe und Fertigungstechnik CY - Wuppertal, Germany DA - 2008-07-17 PY - 2008 AN - OPUS4-17739 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weltschev, Margit A1 - Bäßler, Ralph A1 - Werner, H. A1 - Alves, H. ED - Bernhard Fuchsbauer, ED - Wieland, Hans-Joachim T1 - Use of Corrosion-Resistant Higher-Alloyed Metallic Materials for the Transport of Dangerous Goods in Tanks T2 - 2nd Conference Steels in Cars and Trucks (SCT2008) "Future trends in steel development, processing technologies and applications" - Bringing the automotive, supplier and steel industries together, June 1-5, 2008, Wiesbaden T2 - 2nd Conference Steels in Cars and Trucks (SCT2008) "Future trends in steel development, processing technologies and applications" - Bringing the automotive, supplier and steel industries together CY - Wiesbaden, Germany DA - 2008-06-01 KW - BAM-List KW - Corrosion resistance KW - Dangerous goods KW - Superaustenitic steels KW - Nickel alloy PY - 2008 SN - 978-3-514-00755-0 SP - 53 EP - 62 PB - Verl. Stahleisen GmbH CY - Düsseldorf AN - OPUS4-17566 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Bäßler, Ralph T1 - Evaluation of the resistance of highly alloyed stainless steels and nickel alloys for the transport of dangerous goods T2 - Physico Chemical Mechanics of Materials - 9th International Conference and Exhibition "Problems of Corrosion and Corrosion Protection of Materials", June 10-12, 2008, Lviv, Ukraine (Proceedings) T2 - 9th International Conference and Exhibition "Problem of Corrosion and Corrosion Protection of Materials" CY - Lviv, Ukraine DA - 2008-06-10 KW - Corrosion resistance KW - High alloyed stainless steel KW - Nickel-based alloy KW - Transport KW - Dangerous goods PY - 2008 SN - 0430-6252 N1 - Serientitel: Physico Chemical Mechanics of Materials – Series title: Physico Chemical Mechanics of Materials IS - Special Issue No. 7 SP - 17 EP - 28 CY - Lviv, Ukraine AN - OPUS4-17623 LA - rus AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Sturm, Christine T1 - Correlation between material parameters of high density polyethylene grades and the test performance behaviour of packagings T2 - EUROCORR 2008 - Managing corrosion for sustainability T2 - EUROCORR 2008 CY - Edinburgh, Scotland, UK DA - 2008-09-07 KW - Dangerous goods packagings KW - HDPE grades KW - Material parameters KW - Design type tests PY - 2008 N1 - Serientitel: EFC-Event – Series title: EFC-Event IS - 299 SP - 1 EP - 12 PB - DECHEMA CY - Frankfurt am Main AN - OPUS4-17993 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Übertragbarkeit von Materialkennwerten auf das Baumusterverhalten von Verpackungen aus HDPE T2 - Kolloquium BAM T2 - Kolloquium BAM CY - Berlin, Germany DA - 2008-10-01 PY - 2008 AN - OPUS4-18050 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Use of corrosion-resistant higher-alloyed metallic materials for the transport of dangerous goods in tanks T2 - 2nd Conference Steels in Cars and Trucks (SCT 2008) Future trends in steel development, processing technologies and applications" - Bringing the automotive, supplier and steel industries together T2 - 2nd Conference Steels in Cars and Trucks (SCT 2008) Future trends in steel development, processing technologies and applications" - Bringing the automotive, supplier and steel industries together CY - Wiesbaden, Germany DA - 2008-06-01 PY - 2008 AN - OPUS4-17697 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Bäßler, Ralph A1 - Weltschev, Margit T1 - Regulating the use of new materials in containment systems for dangerous goods T2 - MRS Fall Meeting 2008 - Symposium SS - Selecting and Qualifying New Materials for Use in Regulated Industries (Proceedings) N2 - Transportation of dangerous goods are worldwide regulated in the rules or standards e.g. in the recommendations on the Transport of Dangerous Goods of the United Nations, in the Accord Européen Relatif au Transport International des Marchandises Dangereuses par Route (ADR) etc. Addi-tional to these international regulations also national regulations and stan-dards e.g. Gefahrgutverordnung Straße und Eisenbahn (GGVSE) in Ger-many are bases for the transport of hazardous materials. For the material properties of tanks in the “BAM-List – Requirements for Tanks for the Transport of Dangerous Goods” specifications for the sub-stance prototype approval for tank materials are listed. Further compati-bility evaluations of selected metallic material groups as well as of poly-meric gasket and lining materials under the influence of dangerous goods are published in the List. There are a large number of highly corrosive dangerous goods listed, in which conventional steels are not resistant. Chemical companies, transportation providers and tank producers need tanks made of corrosion-resistant materials (corrosion retardant materi-als) in order to protect the tank shell. The application of high-alloyed stainless steels and nickel alloys as there are alloy 926 (1.4529; X1NiCrMoCuN25-20-7), alloy 31 (1.4562;X1NiCrMoCu31-27-7) and Nickel-Chromium-Molybdenum Alloy 59 (2.4605; NiCr23Mo16Al) is an al-ternative solution compared with the lining of the tanks with a polymeric material. Due to the limited number of corrosion test results with welded test sam-ples of these high-alloyed materials under the influence of corrosive dan-gerous goods BAM, Institute for Corrosion Protection (IKS) Dresden and ThyssenKrupp VDM have been performing a comprehensive test program since 2002. The program comprised corrosion resistance evaluations of the three high-alloyed materials exposed to substances representing cor-rosive dangerous goods such as inorganic halogenides, organic acidic halogenides, sulfonic acids and nitrating acids. T2 - MRS Fall Meeting 2008 - Symposium SS -Selecting and Qualifying New Materials for Use in Regulated Industries CY - Boston, MA, USA DA - 2008-12-01 KW - Korrosionsbeständigkeit KW - Superaustenite KW - Nickellegierung KW - Gefahrguttransport PY - 2008 DO - https://doi.org/10.1557/PROC-1151-SS01-02 VL - 1151E IS - Paper #: 1151-SS01-02 SP - 1 EP - 8(?) CY - Warrendale, PA, USA AN - OPUS4-19610 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Weltschev, Margit A1 - Bäßler, Ralph T1 - Der Duplex-Stahl X2CrNiN23-4 (1.4362) – eine Alternative als Tankwandungswerkstoff für Behälter zum Transport von Gefahrgütern N2 - In der Bundesrepublik Deutschland ist die „BAM-Liste - Anforderungen an Tanks für die Beförderung gefährlicher Güter” die Grundlage für die stoffbezogenen Baumusterzulassungen für Tankcontainer und ortsbewegliche Tanks zur Beförderung gefährlicher Güter durch die BAM Bundesanstalt für Materialforschung und -prüfung. Beständigkeitsbewertungen sowohl von ausgewählten metallischen Werkstoffgruppen als auch von polymeren Dichtungs- und Beschichtungswerkstoffen unter dem Einfluss von Gefahrgütern und wassergefährdenden Stoffen sind in der BAM-Liste enthalten. Sofern nicht anders angegeben, gelten die Werkstoffbeständigkeitsbewertungen für Betriebstemperaturen bis max. 50 °C und für handelsüblich technisch reine Stoffe. Entsprechend den gültigen Gefahrgutverordnungen für den Transport von Gefahrgütern auf der Straße, derSchiene und zur See wird eine innere Besichtigung der Tanks nach einer vorgegebenen Prüffrist der Tanks gefordert. Für die Dauer der Prüfintervalle ist die Werkstoffbeständigkeit zu gewährleisten. Unter den über 7000 in der BAM-Liste enthaltenen Stoffen ist ein großer Anteil von Gefahrgütern und wassergefährdenden Stoffen mit hohem Transportaufkommen enthalten, die nicht korrosiv auf die meisten metallischen Werkstoffe wirken und somit bestehen keine Unterschiede in der Bewertung der Beständigkeit zwischen den häufig im Tankbau eingesetzten austenitischen CrNi- oder CrNiMo-Stählen 1.4401 (X5CrNiMo17-12-2), 1.4404 (X2CrNiMo17-12-2) und 1.4571 (X6CrNiMoTi17-12-2) und dem Duplexstahl 1.4362 (X2CrNiN23-4, UNS S 32304). Es gibt nur eine sehr geringe Anzahl von Ergebnissen von Korrosionsversuchen mit diesem Werkstoff unter dem Einfluss von korrosiven Gefahrgütern. Zur Gewinnung von Korrosionsdaten wurden in Absprache mit dem Auftraggeber relevante Stoffe aus der BAMListe ausgewählt, in denen die im Transporttankbau gebräuchlichen CrNiMo-Werkstoffe unter Berücksichtigung stoffspezifischer und betrieblicher Auflagen einsetzbar sind. Die Korrosionstests sollen zeigen, inwieweit der betrachtete Duplexstahl in Analogie zu den austenitischen CrNiMo-Stählen bewertet werden kann. Aus den Versuchsergebnissen kann die Schlussfolgerung gezogen werden, dass der untersuchte Duplexstahl in alkalischen Medien eine Alternative zu austenitischen Stählen für den Transport von Gefahrgütern darstellt. Aufgrund des verringerten Legierungsgehaltes, insbesondere an Nickel (3,7 %) und Molybdän (0,15 %), wurde eine geringere Korrosionsbeständigkeit des untersuchten Duplexstahls 1.4362 im Vergleich zu den austenitischen CrNiMo-Stählen, insbesondere in „sauren“ Medien beobachtet. Die Beständigkeitsbewertungen dieses Werkstoffes werden in der 10. Auflage der BAM-Liste veröffentlicht und dem interessierten Anwenderkreis auch in Form von Beständigkeitslisten zur Verfügung gestellt. T3 - BAM Forschungsberichtreihe - 287 PY - 2009 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1640 SN - 978-3-9812910-3-2 SN - 0938-5533 VL - 287 SP - 1 EP - 71 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-164 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weltschev, Margit T1 - Kostengünstiger Stahl mit hoher Beständigkeit JF - Gefahrgut KW - Duplexstahl KW - Korrosionsbeständigkeit KW - Tankwerkstoff KW - Gefahrguttransport KW - BAM-Liste PY - 2009 SN - 0944-6117 IS - 6 SP - 20 EP - 21 PB - Vogel CY - München AN - OPUS4-19640 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Correlation between material parameters of high density polyethylene grades and the test performance behavior of packagings T2 - NACE International corrosion conference 2009 (Proceedings) T2 - NACE International corrosion conference 2009 CY - Atlanta, Georgia, USA DA - 2009-03-22 KW - Dangerous goods packagings KW - HDPE grades KW - Material parameters KW - Design type tests PY - 2009 SP - 1 EP - 13 (Paper 09328) AN - OPUS4-19257 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Correlation between material parameters of polyethylene grades and the test performance behaviour of packagings T2 - NACE 2009 T2 - NACE 2009 CY - Atlanta, GA, USA DA - 2009-03-22 PY - 2009 AN - OPUS4-19292 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Vergleich der Materialeigenschaften von Polyethylenformstoffen mit dem Baumusterverhalten von Gefahrgutverpackungen; Übertragbarkeit von Kennwerten T2 - 12. Gefahrgut-Technik-Tage Berlin, BAM T2 - 12. Gefahrgut-Technik-Tage Berlin, BAM CY - Berlin, Germany DA - 2009-11-12 PY - 2009 AN - OPUS4-20390 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Weltschev, Margit T1 - Vergleich der Materialkennwerte von Formstoffen aus Polyethylen hoher Dichte mit dem Baumusterverhalten von Gefahrgutverpackungen N2 - Polyethylen hat sich über Jahre als wirtschaftlicher Blasformwerkstoff bewährt, aus dem technisch hochwertige Gefahrgutverpackungen und Großpackmittel (IBC) hergestellt werden, die ihre Qualität millionenfach unter Beweis gestellt haben. In den UN-Empfehlungen und in den darauf aufbauenden internationalen Vorschriften zur Beförderung von Gefahrgütern auf der Straße und Schiene, zur See und in der Luft wird eine Verpackungsbauart durch Konstruktion, Größe, Werkstoff und Dicke sowie Art der Ausführung und des Verpackens bestimmt. Die Bauartprüfungen müssen pro Bauart und Hersteller durchgeführt werden. Das Bestehen dieser Mindestanforderungen ist aber kein Kriterium dafür, ob der Formstoff Polyethylen aus einer anderen Produktionsstätte noch von der Bauartdefinition erfasst wird und somit ein „gleicher“ Werkstoff ist. Zum Vergleich der Polyethylenformstoffe für eine Bauart wurden in der Verfahrensregel zum Eignungsnachweis alternativer Kunststoff-Formstoffe von Verpackungen und Großpackmitteln (IBC) zur Beförderung gefährlicher Güter - BAM-GGR 003 die Eigenschaften: Schmelze-Massefließrate MFR, Dichte D, Kerbschlagzähigkeit acN bei -30 °C, Spannungsrissbeständigkeit FNCT (engl.: full notch creep test) und Beständigkeit gegen oxidativen Abbau Ox (bestimmt durch den prozentualen Anstieg der MFR in Salpetersäure) mit den entsprechenden Prüfmethoden ausgewählt sowie die Toleranzen definiert. Für den Antragsteller einer Bauartzulassung für eine Verpackung oder einen IBC ist ein Verzicht auf Bauartprüfungen letztendlich mit einer Kosten- und Zeitersparnis verbunden. Für Verpackungshersteller stellt bei häufig auftretendem Formstoffwechsel die Möglichkeit des Formstoffvergleichs mittels Werkstoffkennwerten eine große Hilfestellung bei der Bewertung des Leistungsniveaus der Formstoffe und ein Instrument zur Vorauswahl von neuen Formstoffen dar. Die Formstoffeigenschaften in der Verpackungsbauart werden durch eine Vielzahl von Faktoren wie z.B. die Formmasseeigenschaften, die Formteilgestaltung, die Werkzeuggestaltung, die Verarbeitungsbedingungen und die zeitabhängige Alterung beeinflusst. Der Nachweis der Praxisrelevanz dieser Gefahrgutregel, dass der Vergleich dieser Formstoffeigenschaften von Polyethylenen und der Vergleich der mit diesen Eigenschaften in direktem Zusammenhang stehenden Versagensgrenzen bei Baumusterprüfungen der gleichen Bauart von Verpackungen aus diesen Formstoffen zur gleichen Bewertung der Formstoffe führen, wurde mit dieser Arbeit geführt. Folgende Materialkennwerte verschiedener Polyethylenformstoffe stehen miteinander in einer systematischen Beziehung mit Baumusterprüfungen: - acN bei -30 °C//Grenzfallhöhen der Fallprüfungen bei -18 °C, - FNCT//Versagenszeiten der Stapeldruckprüfungen mit Netzmittellösung, - Ox//Grenzfallhöhen der Fallprüfungen bei -18 °C nach Konditionierung mit 55%iger Salpetersäure und - Ox//Versagenszeiten der Stapeldruckprüfungen mit 55%iger Salpetersäure. Die 21-tägige Vorlagerung mit 55%iger Salpetersäure bei 40 °C bewirkt eine Erhöhung der Grenzfallhöhe der Baumuster in den Fallprüfungen bei -18 °C im Vergleich zu den Baumustern ohne Vorlagerung und führt somit infolge Nachkristallisation des Polyethylens zu einer falschen Bewertung des Leistungsniveaus der Formstoffe. Abweichungen im Vergleich der Versagenszeiten der Baumuster aus den verschiedenen Polyethylenformstoffen lassen sich durch Anwendung weiterer Untersuchungsmethoden, wie der Fourier-Transformation-IRSpektroskopie (FTIR) erklären. Die Messung der Zugeigenschaften Zugfestigkeit und Bruchdehnung eignet sich grundsätzlich zum Vergleich der Polyethylenformstoffe hinsichtlich ihrer Beständigkeit gegen oxidativen Abbau; die Messwerte unterliegen jedoch Schwankungen. N2 - Polyethylene has been proving its worth as economical blow moulding material for many years. Technical high-value hollow articles are being produced of polyethylene which have proved their quality as dangerous goods packagings millions of times. A design type is defined by the construction, dimension, material and thickness as well as by the character and type of packaging in the UN-recommendations and thereon based international regulations for the transport of dangerous goods on road, on rail, at see and in the air. Design type tests must be performed for every design type and manufacturer. However, passing the minimum requirements is no criterion even if the polyethylene grade of another production facility meets the design type definition and is of a comparable grade forthis design type. The properties melt flow rate (MFR), relative density (D), low temperature notched Impact strength (N.I.S.) at -30 °C, environmental stress crack resistance (FNCT) and resistance to oxidative degradation Ox by nitric acid (determined by the increase of MFR) have been selected together with the corresponding test methods and tolerances for a comparison of polyethylene grades of one design type in the procedural rule on suitability proof for alternative plastic resins used for dangerous goods packagings and intermediate bulk containers (IBCs) - BAM GGR 003. A waiving of design type tests is related in the end to save costs and time for the applicant for a design type approval of a packaging or IBC. For manufacturers of packagings, the possibility of comparing plastic moulding materials by means of material parameters is a great support in evaluating of the proficiency level of grades that often change. It serves as an instrument for the pre-selection of new grades too. A multitude of factors influence the properties of plastic moulded materials in a packaging design type: for example, the properties of the plastic moulding material, components design, tool design, processing conditions and time-dependent ageing. Proof of the practical relevance of this dangerous good rule was provided with this work. A comparison of the properties of polyethylene grades and a comparison of the failure limits in design type tests with the same design type of packagings made of these grades led to the same Evaluation of the grades. The following material parameters of different polyethylene grades are in a systematic relationship to each other: - N.I.S at -30 °C//marginal drop heights of design types in drop tests at -18 °C, - FNCT//times to failure of design types in stacking tests with wetting solution, - Ox//marginal drop heights of design types in drop tests at -18 °C after conditioning with 55 % nitric acid and - Ox//times to failure of design types in stacking tests with 55 % nitric acid. Conditioning the design types with 55 % nitric acid for 21 days at 40 °C causes an increase of the marginal drop heights of the design types in drop tests at -18 °C when compared with design types without pre-storage. Therefore, there is a wrong evaluation of the proficiency level of the grades. Variations in a comparison of the design types produced of different polyethylene grades can be explained by applying additional examination methods such as Fourier transform infrared (FTIR). Measurement of tensile strength and breaking elongation is in principle suitable for a comparison of polyethylene grades regarding resistance to oxidative degradation, but the measured values are subject to variations. T3 - BAM Dissertationsreihe - 53 KW - Polyethylenformstoffe KW - Baumusterprüfungen KW - Standardflüssigkeiten KW - Materialkennwerte KW - Gefahrgutverpackungen PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1057 SN - 978-3-9812910-9-4 SN - 1613-4249 VL - 53 SP - 1 EP - 220 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-105 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Weltschev, Margit A1 - Niebergall, Ute A1 - Haufe, Manuela A1 - Heyer, Martina T1 - Vergleich der Materialeigenschaften von Polyethylenformstoffen und der Baumusterprüfungen von Gefahrgutverpackungen in Abhängigkeit von der Vorlagerungsdauer mit 55 %-iger Salpetersäure N2 - Die zum Vergleich der Polyethylenformstoffe für eine Bauart in der DIN EN 15507: 2009 – Verpackung – Verpackungen zur Beförderung gefährlicher Güter – Vergleichende Werkstoffprüfung von Polyethylensorten ausgewählten Materialkennwerte Schmelze-Masse-Fließrate MFR, Dichte D, Kerbschlagzähigkeit acN bei -30 °C, Spannungsrissbeständigkeit FNCT (full notch creep test) und Beständigkeit gegen oxidativen Abbau Ox (bestimmt durch den prozentualen Anstieg der MFR in 55 %-iger Salpetersäure) stehen in einer systematischen Beziehung mit Baumusterprüfungen. So stehen die mit Prüfkörpern aus gepressten Platten bestimmte Kerbschlagzähigkeit acN bei -30 °C und die Beständigkeit gegen oxidativen Abbau der Polyethylenformstoffe in einem Zusammenhang mit den Fallprüfungen der Baumuster aus diesen Formstoffen bei -18 °C, wobei die Baumuster einer 21-tägigen Vorlagerung mit der Standardflüssigkeit 55 %-ige Salpetersäure bei 40 °C unterzogen werden. Untersuchungen in der Dissertation zum Thema: Vergleich der Materialkennwerte von Formstoffen aus Polyethylen hoher Dichte mit dem Baumusterverhalten von Gefahrgutverpackungen haben gezeigt, dass bei 21-tägiger Vorlagerung der Baumuster mit 55 %-iger Salpetersäure die Grenzfallhöhen ansteigen, anstatt zu sinken. Zur Bestätigung und Erweiterung dieser Untersuchungsergebnisse wurden die Abhängigkeit der Grenzfallhöhen in den Fallprüfungen bei -18 °C, der MFR sowie der Zugeigenschaften Zugfestigkeit, Bruchdehnung und E-Modul von der Dauer der Vorlagerung mit 55 %-iger Salpetersäure bei 40 °C und 23 °C untersucht. Verpackungsbaumuster aus drei Formstoffen verschiedener Hersteller wurden mit 55 %-iger Salpetersäure 21, 42 und 84 Tage bei 40 °C sowie 6 Monate bei 23 °C vorgelagert. Die MFR und die Zugeigenschaften wurden von Kanisterwandausschnitten bestimmt. In Fallprüfungen bei -18 °C wurden die Grenzfallhöhen der Baumuster ermittelt. Die Werte der Kerbschlagzähigkeit bei -30 °C der Formstoffe stehen nicht im Zusammenhang mit den in den Kältefallprüfungen ermittelten Grenzfallhöhen. Die Grenzfallhöhen der nicht vorgelagerten Kanister aus den Formstoffen mit niedrigerer Kerbschlagzähigkeit sind höher im Vergleich zum Formstoff mit höherer Kerbschlagzähigkeit. Der oxidativ schädigende Einfluss der Salpetersäure wirkt sich in höherem Maße bei dem Formstoff mit der niedrigeren Beständigkeit gegen oxidativen Abbau in einer stärkeren Reduzierung der Grenzfallhöhen mit zunehmender Vorlagerungsdauer aus. Die 21-tägige Vorlagerung mit 55 %-iger Salpetersäure bei 40 °C bewirkte bei den Kanistern aus Formstoffen mit höherer Beständigkeit gegen oxidativen Abbau eine Erhöhung der Grenzfallhöhe in den Kältefallprüfungen. Mit Erhöhung der Vorlagerungszeit der Kanister auf 42 und 84 Tage wurden auch die Grenzfallhöhen der Kanister aus diesen Formstoffen aufgrund der mit dem längeren Zeitraum der Einwirkung verbundenen stärkeren oxidativen Schädigung durch die Salpetersäure reduziert. Die Grenzfallhöhe der Kanister aus dem Formstoff mit der niedrigeren Beständigkeit gegen oxidativen Abbau wurde dagegen durch die 21-tägige Vorlagerung erniedrigt und stieg mit zunehmender Vorlagerungsdauer wieder an. Der Formstoff wurde durch die Einwirkung der Salpetersäure über einen längeren Zeitraum elastisch. Gemäß DIN EN ISO 16101 ist die oxidativ schädigende Wirkung der 55 %-igen Salpetersäure über einen Zeitraum von 21 Tagen bei 40 °C mit der oxidativ schädigenden Wirkung der 55 %-igen Salpetersäure innerhalb von 180 Tagen (6 Monaten) bei 23 °C zu vergleichen. Der Vergleich der Grenzfallhöhen der Kanister und der MFR von Wandausschnitten aus diesen Kanistern nach 21-tägiger Vorlagerung bei 40 °C und nach der sechsmonatigen Vorlagerung bei 23 °C zeigte, dass die oxidative Schädigung der Polyethylenformstoffe nach sechs Monaten Vorlagerung bei 23 °C stärker im Vergleich zur 21-tägigen Vorlagerung bei 40 °C ist. Die Messergebnisse zeigten deutlich, dass die sechsmonatige Vorlagerung der Kanister bei 23 °C einen höheren Anstieg der MFR und niedrigere Grenzfallhöhen der Kanister in den Kältefallprüfungen im Vergleich zur 21-tägigen Vorlagerung der Kanister bei 40 °C bewirkte. Als Folge der Diffusion von Salpetersäure in die Polyethylenformstoffe und ihrer Reaktion mit dem Polymeren verändern sich die mechanischen Eigenschaften. Die prozentualen Werte der Abnahme bzw. Zunahme der Zugfestigkeit und der Bruchdehnung von Probekörpern aus der Seitenwand der Baumuster nach unterschiedlichen Vorlagerungszeiten stehen nur teilweise mit den Grenzfallhöhen der Kanister in den Kältefallprüfungen im Zusammenhang. Bemerkenswert ist, dass beim Vergleich der Zugfestigkeit und der Bruchdehnung des Formstoffes mit einer hohen Beständigkeit gegen oxidativen Abbau mit den Grenzfallhöhen der Kanister aus diesem Formstoff diese Materialkennwerte mit zunehmender Vorlagerungsdauer ansteigen, aber die Grenzfallhöhe nur nach der 21-tägigen Vorlagerung ansteigt und anschließend mit zunehmender Vorlagerungsdauer abfällt. Zugfestigkeit und Bruchdehnung der Probekörper aus dem Formstoff mit der geringeren Beständigkeit gegen oxidativen Abbau sinken in Analogie zu den Grenzfallhöhen mit steigender Vorlagerungsdauer der Kanister mit der Säure. Der Vergleich der Werte des E-Moduls mit den Grenzfallhöhen zeigte, dass bei den Kanistern aus dem Formstoff mit der niedrigeren Beständigkeit gegen oxidativen Abbau sich E-Modul und Grenzfallhöhe analog verhalten. Mit zunehmender Vorlagerungsdauer der Kanister steigen der E-Modul und die Grenzfallhöhen in den Kältefallprüfungen an. Die, durch die Einwirkung der Salpetersäure, entstandenen Eigenspannungszustände sind die Ursache für den ansteigenden E- Modul der Probekörper aus diesen Formstoffen. Bei den Probekörpern von Kanistern aus dem Formstoff mit der höheren Beständigkeit gegen oxidativen Abbau wurde ein markanter Abfall des E-Moduls nach 21-tägiger Vorlagerung der Kanister gemessen. Der E-Modul sinkt noch geringfügig nach der 42-tägigen Vorlagerung und steigt mit zunehmender Vorlagerungsdauer dagegen wieder an. Die Grenzfallhöhen verhalten sich erwartungsgemäß gegenläufig. T3 - BAM Forschungsberichtreihe - 293 PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1580 SN - 978-3-9813853-3-5 SN - 0938-5533 VL - 293 SP - 1 EP - 25 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-158 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Comparsion of the resistance to oxidative degradation of polyethylene grades with the test performance behaviour of packagings for the transport of dangerous goods T2 - CORROSION 2010 T2 - CORROSION 2010 CY - San Antonio, TX, USA DA - 2010-03-14 PY - 2010 AN - OPUS4-21052 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Niebergall, Ute T1 - Comparison of the stress crack resistance of polyethylene grades with the test performance behaviour of packagings for the transport of dangerous goods T2 - EUROCORR 2010 - From the earth´s depths to space heights N2 - Resistance to stress cracking by wetting solution is one of the selected properties together with the corresponding test method FNCT and tolerances for a comparison of polyethylene grades of one design type in the procedural rule on suitability proof for alternative plastic resins used for packagings and intermediate bulk containers (IBCs) for the transport of dangerous goods. The environmental stress crack resistance determined by Full Notch Creep Test (FNCT) represents the impacts from the stacking tests at 40 °C performed with standard liquid wetting solution (without pre-storage) and with normal butyl acetate saturated wetting solution (pre-storage with normal butyl acetate). Environmental stress crack resistance determined with FNCT for the polyethylene grades was related to the times to failure of different jerrican samples made of these grades in stacking tests with 5% wetting solution and a n-butyl acetate saturated wetting solution (pre-storage with n-butyl acetate) at 40 °C. The FNCT is suitable for comparison of polyethylene grades in relation to environmental stress crack resistance independent of their use as drum, IBC or jerrican material. The stiffness of polyethylene grades should be taken into account to the comparison as jerricans are not only chemically but also mechanically stressed. T2 - EUROCORR 2010 CY - Moscow, Russia DA - 2010-09-13 KW - Polyethylenformstoffe KW - Gefahrgutverpackungen KW - Spannungsrissbeständigkeit KW - Stapeldruckprüfungen PY - 2010 N1 - Serientitel: EFC-Event – Series title: EFC-Event IS - 324 SP - 1 EP - 6 PB - DECHEMA CY - Moscow AN - OPUS4-21974 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Deuerler, F. T1 - Comparison of the resistance to oxidative degradation of polyethylene grades with the test performance behavior of packagings for the transport of dangerous goods T2 - NACE International corrosion conference 2010 (Proceedings) T2 - NACE International Corrosion Conference 2010 CY - San Antonio, Texas, USA DA - 2010-03-14 KW - Dangerous goods packagings KW - Polyethylene grades KW - Resistance to oxidative degradation KW - Design type tests KW - FTIR spectroscopy PY - 2010 SP - 10044-1 - 10044-13 AN - OPUS4-21089 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Vergleich der Materialeigenschaften von Polyethylenformstoffen mit dem Baumusterverhalten von Gefahrgutverpackungen T2 - Seminar: Ausgewählte Kapitel der Sicherheitstechnik/Materialkunde, Werkstoffe und Fertigungstechnik der Bergischen Universität Wuppertal, Fachbereich D, Abt. Maschinenbau T2 - Seminar: Ausgewählte Kapitel der Sicherheitstechnik/Materialkunde, Werkstoffe und Fertigungstechnik der Bergischen Universität Wuppertal, Fachbereich D, Abt. Maschinenbau CY - Wuppertal, Germany DA - 2010-01-15 PY - 2010 AN - OPUS4-21099 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Datenbank Gefahrgut - aktuelle Funktionalitäten für den Bereich Verpackung sowie geplanter Ausbau T2 - Ausgewählte Kapitel der Sichrheitstechnik/Materialkunde, Werkstoffe und Fertigungstechnik der bergischen Universität Wuppertal, Fachbereich D, Abt. Maschinenbau T2 - Ausgewählte Kapitel der Sichrheitstechnik/Materialkunde, Werkstoffe und Fertigungstechnik der bergischen Universität Wuppertal, Fachbereich D, Abt. Maschinenbau CY - Wuppertal, Germany DA - 2010-01-15 PY - 2010 AN - OPUS4-21100 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weltschev, Margit A1 - Deuerler, F. ED - Suter, G. ED - de Rademaeker, E. T1 - Comparison of material parameters of polyethylene grades and the test performance behaviour of packagings for the transport of dangerous goods T2 - 13th International symposium on loss prevention and safety promotion in the process industries (Proceedings) T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 KW - HDPE-Formstoffe KW - Werkstoffkennwerte KW - Spannungsrissbeständigkeit KW - Verpackungen KW - Baumusterprüfung PY - 2010 SN - 978-90-76019-291 VL - 02 SP - 383 EP - 386 CY - Brugge, Belgium AN - OPUS4-21451 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Niebergall, Ute T1 - Comparsion of the stress crack resistance of polyethylene grades with the test performance behaviour of packagings for the transport of dangerous goods T2 - EUROCORR 2010 - The European Corrosion Congresss T2 - EUROCORR 2010 - The European Corrosion Congresss CY - Moscow, Russia DA - 2010-09-13 PY - 2010 AN - OPUS4-22169 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Niebergall, Ute T1 - Comparison of the stress crack resistance of polyethylene grades with the test performance behaviour of packagings for the transport of dangerous goods N2 - Technically high-quality hollow articles made of polyethylene have proved many times their value as dangerous goods packagings. Design type tests according to the international regulations for the transport of dangerous goods - drop test, stacking test, hydraulic pressure test and leakproofness test must be performed for every design type and manufacturer. The properties melt flow rate (MFR), relative density (D), low temperature notched Impact strength (N.I.S.) at -30 °C, environmental stress crack resistance (FNCT) and resistance to oxidative degradation Ox by nitric acid (determined by the increase of MFR) have been selected together with the corresponding test methods and tolerances for a comparison of polyethylene grades of one design type in the procedural rule on suitability proof for alternative plastic resins used for dangerous goods packagings and intermediate bulk containers (IBCs) – EN 15507. We wanted to proof the practical relevance of this standard by comparing the relationship between the results of the FNCT and the times to failure of design types in stacking tests with wetting solution and normal butyl acetate saturated wetting solution. T2 - EUROCORR 2010 CY - Moscow, Russia DA - 13.09.2010 KW - Drop test KW - Stacking test KW - Hydraulic pressure test KW - Leakproofness test PY - 2010 AN - OPUS4-35843 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Comparison of the material properties of polyethylene grades with the test performance behaviour of packgings for the transport of dangerous goods in dependence on the pre-storage time with 55 % nitirc acid T2 - Eurocorr 2011 T2 - Eurocorr 2011 CY - Stockholm, Sweden DA - 2011-09-04 PY - 2011 AN - OPUS4-24408 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Niebergall, Ute T1 - Comparison of the material parameters of polyethylene grades with the test performance behaviour of packagings for the transport of dangerous goods in dependence on the pre-storage time with 55% nitric acid T2 - EUROCORR 2011 - Developing solutions for the global challenge N2 - The material parameters melt flow rate MFR, density D, notched impact strength N.I.S. at -30 °C, stress crack resistance FNCT and resistance to oxidative degradation Ox (determined by the increase of MFR) have been selected for a comparison of polyethylene grades for one design type in the “European Standard EN 15507 - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades”. The parameters have a systematic relationship with design type tests. The notched impact strength at -30 °C and the resistance to oxidative degradation of polyethylene grades determined with test specimens of compression moulded sheets are directly comparable with drop tests at -18 °C of design types produced of these grades after pre-storage with 55 % nitric acid for 21 days at 40 °C. The impact of the pre-storage time of jerricans with 55 % nitric acid at 40 °C and 23 °C on the marginal drop heights in drop tests at -18 °C, on the MFR and on the tensile properties tensile strength, breaking elongation and the elastic modulus were investigated. Packaging design types (jerricans) made of three polyethylene grades from different producers were pre-stored with 55 % nitric acid for 21,42 and 84 days at 40 °C as well as for six months at 23 °C. The MFR and tensile properties of test specimens taken from the design type side walls as well as the marginal drop heights of the jerricans in drop tests at -18 °C were determined. The values of the notched impact strength at -30 °C of polyethylene grades are not comparable with the marginal drop heights determined in drop tests at -18 °C. The oxidative damaging impact of nitric acid has a greater effect on the grade with lower resistance to oxidative degradation by reducing more significantly the marginal drop heights with increasing pre-storage time. Pre-damage with 55 % nitric acid for 21 days at 40 °C, as recommended in ISO 16101 and EN 15507 caused an increase in the marginal drop heights of most design types in drop tests when compared with design types without pre-damage. The test results demonstrated clearly that pre-storage of the jerricans for six months at 23 °C caused a higher increase in the MFR and lower marginal drop heights of the jerricans in drop tests at -18 °C compared with pre-storage of the jerricans for 21 days at40 °C. The mechanical properties change as a result of diffusion of nitric acid into the polyethylene grades and the reaction of the nitric acid with the polymers. The percentage decrease and increase in the tensile strength, breaking elongation and elasticity modulus of test specimens taken from the design type side walls after different pre-storage times were only partly comparable with the marginal drop heights in drop tests at -18 °C. T2 - EUROCORR 2011 - Developing solutions for the global challenge CY - Stockholm, Sweden DA - 04.09.2011. KW - Gefahrgutverpackungen KW - Polyethylenformstoffe KW - Baumusterprüfungen KW - Nachweis der chemischen Verträglichkeit KW - Oxidativer Abbau PY - 2011 SP - 1 EP - 12 AN - OPUS4-24346 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weltschev, Margit T1 - Duplex als Alternative JF - Gefährliche Ladung N2 - EDELSTAHL - Die Entwicklung immer besser auf die Füllguteigenschaften abgestimmter, spezieller Stahlqualitäten geht kontinuierlich voran. Ein weiterer Duplexstahl wurde jüngst von der BAM bewertet. KW - Duplexstahl KW - Tankcontainer KW - Tankfahrzeuge KW - Beständigkeitsbewertung KW - BAM-Liste PY - 2011 SN - 0016-5808 VL - 09 SP - 10 EP - 13 PB - Storck CY - Hamburg AN - OPUS4-24387 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schwarzer, Stefanie A1 - Weltschev, Margit A1 - Otremba, Frank T1 - Lebensdauer und Schadensursachen von Tankcontainern, Tankfahrzeugen und Kesselwagen zur Beförderung von Gefahrgütern in der Praxis JF - Technische Sicherheit N2 - Daten über Schadensursachen und die tatsächliche Nutzungsdauer der Tanks zum Transport von Gefahrgütern liegen nur in begrenztem Maße vor. Auf der Basis der Daten von Tankbaufirmen, Speditionen und Eisenbahnkesselwagen-Vermietgesellschaften wurde die durchschnittliche Lebensdauer von Tankcontainern, Tankfahrzeugen und Kesselwagen zur Beförderung von Gefahrgütern in der Praxis ermittelt und die Hauptschadensursachen analysiert. Korrosion, Risse an Schweißnähten, Gestaltungs- und Dimensionierungsfehler sowie fertigungs- und betriebsbedingte Fehler zählen zu den Hauptschadensursachen. Viele Tanks werden vor Ablauf ihrer Nutzungsdauer nicht mehr für den Transport von Gefahrgütern eingesetzt, da sie nicht mehr den geänderten gesetzlichen Anforderungen in den Gefahrgutvorschriften entsprechen. Die Voraussagen durch Literaturangaben und Ergebnisse von Korrosionsversuchen in der BAM-Liste – Anforderungen an Tanks zur Beförderung gefährlicher Güter – spiegeln sich in der Nutzungsdauer/Lebensdauer der Tanks wider. KW - Gefahrguttransport KW - Tankcontainer KW - Tankfahrzeuge KW - Eisenbahnkesselwagen KW - Schadensursachen KW - Lebensdauer PY - 2011 SN - 2191-0073 VL - 1 IS - 11/12 SP - 28 EP - 33 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-24972 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Bäßler, Ralph A1 - Otremba, Frank T1 - Use of higher-alloyed metallic materials and duplex steels for transport tanks of dangerous goods T2 - Stainless steel world conference & exhibition 2011 (Proceedings) N2 - Compatibility evaluations of selected metallic materials under the influence of dangerous goods are published in the BAM-List - Requirements for Tanks for the Transport of Dangerous Goods” as basis for substance-related prototype approvals for tank Containers designed for the carriage of dangerous goods. There is a request of the tank manufacturing industry and transportation Companies to incorporate additional materials into the BAM-List, especially corrosion-resistant materials because of the large number of corrosive dangerous goods. One solution to solve corrosion Problems is to line the tank with a polymer, an alternative solution is the application of high-alloyed stainless steels and nickel-based alloys as there are 1.4529 (XINiCrMoCu 25-20-7, alloy 926), 1.4562 (X1NiCrMoCu32-28-7, alloy 31) and 2.4605 (NiCr23Mo16AI, alloy 59). There is an interest to use cost-efficient steels with high strength values and concomitant adequate corrosion resistance such as duplex steel 1.4362 (X2CrNiN23-4). This steel grade was originally developed as a substitute for the austenitic grades 1.4404 (X2CrNiMo17-12-2) and 1.4571 (X6CrNiMoTi17-12-2). Due to the lower content of the alloy elements nickel and molybdenum this duplex steel is a cost-efficient alternative to molybdenum containing austenite. Due to the limited number of corrosion test results with welded test samples of these high-alloyed materials and the duplex steel under the influence of corrosive dangerous goods a comprehensive test Programme was performed with these materials in Cooperation with ThyssenKrupp VDM and Deutsche Edelstahlwerke GmbH. It can be concluded from the test results that the superaustenitic steels 1.4529 and 1.4562 as well as the nickel-based alloy 2.4605 are a really good alternative as tank materials for the transport of dangerous goods in comparison to the lining of the tanks. The nickel-based alloy 2.4605 shows the best resistance and is suitable as material for tanks transporting all tested corrosive substances. One exception is the temperature limit during the transport of hydrochloric acid. The superaustenit 1.4562 is a resistant material with a wide ränge of application. Exceptions for use are: ammonium bifluoride, brine, 34 % calcium Chloride solution, hydrochloric acid, perchloric acid, 90 % 2-chloropropionic acid, nitrating acid with nitric acid content > 50 % and molten monochloroacetic acid. The alloy is limited suitable for allyl Chloride, aluminum Chloride, copper (II) -Chloride and ferric Chloride. The superaustenit 1.4529 showed the lowest resistance compared to the other two materials. This steel is not resistant in hydrochloric acid, perchloric acid, sodium Chlorite and sodium hypochlorite. The application is limited in the concentration ränge of aqueous Solutions of aluminum Chloride, copper (II) Chloride and ferric Chloride. Due to the reduced alloying content of the duplex steel 1.4362 (X2CrNiN23-4) compared to the austenitic CrNiMo-steels, a lower resistance especially in acidic media like formic, acetic or sulfuric acid was observed. Within the more than 7.000 substances contained in the BAM-List there is a large amount of dangerous goods such as hydrocarbons, alcohols, aldehydes, ketones, ethers, esters, and inorganic alkaline substances which have a large transport volume and do not corrode the duplex steel 1.4362 (X2CrNiN23-4). The test results are included in the actual 11th edition of the BAM-List and therefore available for the costumer. T2 - Stainless steel world conference & exhibition 2011 CY - Maastricht, The Netherlands DA - 29.11.2011 KW - Duplexstahl KW - Tankcontainer KW - Tankfahrzeuge KW - Beständigkeitsbewertung KW - BAM-Liste PY - 2011 SP - 1 EP - 12 PB - KCI Publ. AN - OPUS4-24975 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Use of Higher -alloyed metallic materials and duplex steels for transport tanks of dangerous goods T2 - Stainless Steel World 2011 T2 - Stainless Steel World 2011 CY - Maastricht, Netherlands DA - 2011-11-29 PY - 2011 AN - OPUS4-25040 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niebergall, Ute A1 - Weltschev, Margit T1 - Comparison of the stress crack resistance of polyethylene grades with the test performance behaviour of packagings for the transport of dangerous goods T2 - PPS-27 - 27th World congress of the polymer processing society N2 - Resistance to stress cracking by wetting solution is one of the selected properties together with the corresponding test method FNCT and tolerances for a comparison of polyethylene grades of one design type in the procedural rule on suitability proof for alternative plastic resins used for packagings and intermediate bulk Containers (IBCs) for the transport of dangerous goods. The environmental stress crack resistance determined by Full Notch Creep Test (FNCT) represents the impacts from the stacking tests at 40 °C performed with Standard liquid wetting solution (without pre-storage) and with normal butyl acetate saturated wetting solution (pre-storage with normal butyl acetate). Environmental stress crack resistance determined with FNCT for the polyethylene grades was related to the times to failure of different jerrican samples made of these grades in stacking tests with 5 % wetting solution and a n-butyl acetate saturated wetting solution (pre-storage with n-butyl acetate) at 40 °C. The FNCT is suitable for comparison of polyethylene grades in relation to environmental stress crack resistance independent of their use as drum, IBC or jerrican material. The stiffness of polyethylene grades should be taken into account to the comparison as jerricans are not only chemically but also mechanically stressed. T2 - PPS-27 - 27th World congress of the polymer processing society CY - Marrakech, Morocco DA - 10.05.2011 KW - Gefahrgutverpackungen KW - Polyethylenformstoffe KW - Full notch creep test KW - Stapeldruckprüfung PY - 2011 SP - 1 EP - 4 AN - OPUS4-23834 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Bäßler, Ralph T1 - Use of Higher Alloyed Metallic Materials and Duplex Steels for Transport Tanks of Dangerous Goods T2 - Steels in Cars and Trucks (SCT 2011) T2 - Steels in Cars and Trucks (SCT 2011) CY - Salzburg, Austria DA - 2011-06-06 PY - 2011 AN - OPUS4-23801 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Bäßler, Ralph ED - Wieland, H.-J. T1 - Use of higher-alloyed metallic materials and duplex steels for transport tanks of dangerous goods T2 - SCT2011 - 3rd International conference on steels in cars and trucks - Future trends in steel development, processing technologies and applications N2 - Compatibility evaluations of selected metallic materials under the influence of dangerous goods are published in the BAM-List - Requirements for Tanks for the Transport of Dangerous Goods” as basis for substance-related prototype approvals for tank Containers designed for the carriage of dangerous goods. There is a request of the tank manufacturing industry and transportation Companies to incorporate additional materials into the BAM-List, especially corrosionresistant materials because of the large number of corrosive dangerous goods. One solution to solve corrosion Problems is to line the tank with a polymeric material, an alternative solution is the application of high-alloyed stainless steels and nickel-based alloys as there are alloy 926 (1.4529), alloy 31 (1.4562) and alloy 59 (2.4605). But there is an interest to use cost-efficient steels with high strength values and concomitant adequate corrosion resistance such as duplex Steel 1.4362 too. This Steel grade was originally developed as a substitute for the austenitic grades 1.4404 and 1.4571. Due to the lower content of the alloy elements nickel and molybdenum this duplex steel is a cost-efficient alternative to molybdenum containing austenite. Due to the limited number of corrosion test results with welded test samples of these high-alloyed materials and the duplex steel under the influence of corrosive dangerous goods a comprehensive test Programme was performed with these materials in Cooperation with ThyssenKrupp VDM and Deutsche Edelstahlwerke GmbH. It can be concluded from the test results that the "superaustenitic steels” 1.4529 and 1.4562 as well as the nickel-based alloy 2.4605 are a really good alternative as tank materials for the transport of dangerous goods in comparison to the lining of the tanks. Due to the reduced alloying content, in particular Nickel (3.7 %) and Molybdenum (0.15 %), a lower resistance of the duplex steel 1.4362 compared to the austenitic CrNiMo-steels was observed in acidic media. The duplex Steel is an alternative to the austenitic steels, especially in alkaline media. The test results are included in the current 10th edition of the BAM-List and therefore available for the costumer. T2 - SCT2011 - 3rd International conference on steels in cars and trucks CY - Salzburg, Austria DA - 06.05.2011 KW - BAM-List KW - Corrosion resistance KW - Dangerous goods KW - Duplex steels KW - Superaustenitic steels KW - Nickel alloy PY - 2011 SN - 978-3-514-00783-3 SP - 29 EP - 37 PB - Stahleisen AN - OPUS4-23859 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Deuerler, Frederike T1 - Comparsion of the notched impact strength at - 30 °C of polyethylene grades with the test performance behavior of packagings for the transport of dangerous goods T2 - NACE Konferenz N2 - The notched impact strength at -30 °C is one of the selected properties, together with the corresponding test method and tolerances, for a comparison of polyethylene grades of one design type in the procedural rule on suitability proof for alternative plastic resins used for packagings and intermediate bulk containers (IBCs) for the transport of dangerous goods. The marginal drop heights determined with the drop test at -18 °C after pre-storage of the test samples with 55 % nitric acid at 40 °C only partly related to the notched impact strength at -30 °C. The Charpy method is only suitable for classifying the grade in relation to toughness behavior and using this classification for comparison with other grades. Notched impact strength can provide a qualitative indication if the test samples fail under shock forces. Conditioning the design types with 55 % nitric acid for 21 days at 40 °C causes an increase in the marginal drop heights of the design types in drop tests at -18 °C when compared with design types without pre-storage. Post-crosslinking of the grades increases stiffness because of the acidic influence. T2 - NACE Konferenz CY - Houston, TX, USA DA - 13.03.2011 PY - 2011 AN - OPUS4-23377 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Deuerler, F. T1 - Comparison of the notched impact strength at -30°C of polyethylene grades with the test performance behavior of packagings for the transport of dangerous goods T2 - NACE International corrosion conference 2011 (Proceedings) N2 - The notched impact strength at -30 °C is one of the selected properties, together with the corresponding test method and tolerances, for a comparison of polyethylene grades of one design type in the procedural rule on suitability proof for alternative plastic resins used for packagings and intermediate bulk containers (IBCs) for the transport of dangerous goods. The marginal drop heights determined with the drop test at -18 °C after pre-storage of the test samples with 55 % nitric acid at 40 °C only partly related to the notched impact strength at -30 °C. The Charpy method is only suitable for classifying the grade in relation to toughness behavior and using this classification for comparison with other grades. Notched impact strength can provide a qualitative indication if the test samples fail under shock forces. Conditioning the design types with 55 % nitric acid for 21 days at 40 °C causes an increase in the marginal drop heights of the design types in drop tests at -18 °C when compared with design types without pre-storage. Post-crosslinking of the grades increases stiffness because of the acidic influence. T2 - NACE International Corrosion Conference 2011 CY - Houston, TX, USA DA - 13.03.2011 KW - Dangerous goods packagings KW - Polyethylene grades KW - Notched impact strength at -30°C KW - Design type tests KW - Pre-storage with nitric acid PY - 2011 SP - 1 EP - 11 (Paper 11373) AN - OPUS4-23386 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Comparison between material parameters of polyethylene grades and the test performance behaviour of packagings for the transport of dangerous goods T2 - IPRI 2011 T2 - IPRI 2011 CY - Berlin, Germany DA - 2011-05-16 PY - 2011 AN - OPUS4-23661 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weltschev, Margit T1 - Comparison between material parameters of polyethylene grades and the test performance behaviour of packaging for the transport of dangerous goods JF - Packaging technology & science N2 - For the characterization and the comparison of polyethylene grades used for the manufacture of packaging and intermediate bulk container, the following parameters are required: melt flow rate (MFR), density (D), low-temperature notched impact strength, full notch creep test (FNCT) and increase of MFR by molecular degradation (resistance to oxidative degradation). The relationship between these material parameters determined on the basis of specimens prepared from compression-moulded sheets of polyethylene grades and the test behaviour of packaging has been investigated in several tests. The environmental stress crack resistance determined by FNCT represents the impacts from the stacking tests performed with standard liquid wetting solution (without pre-storage) and with normal butyl-acetate-saturated wetting solution (pre-storage with normal butyl acetate). Resistance to molecular degradation by the determination of MFR increase is related to the impacts in drop tests and stacking tests performed after pre-storage for 21 days with standard liquid 55% nitric acid at 40°C. The low-temperature impact strength is directly comparable with the impacts in drop tests at -18°C performed without pre-storage and after pre-storage with 55% nitric acid. A partly good relationship was found between the test results and the material parameters. Conditioning the design types with 55% nitric acid for 21 days causes an increase in the marginal drop heights of the design types in drop tests at -18°C when compared with design types without pre-storage. Post-cross-linking of the grades increases stiffness because of the acidic influence. KW - Dangerous goods packaging KW - Polyethylene grades KW - Material parameters KW - Design-type tests PY - 2011 DO - https://doi.org/10.1002/pts.940 SN - 0894-3214 VL - 24 IS - 6 SP - 361 EP - 371 PB - Wiley CY - Chichester, UK AN - OPUS4-23756 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bäßler, Ralph A1 - Weltschev, Margit T1 - UNS S44400 - A low cost and corrosion-resistant alternative to the austenite containing nickel for tank applications T2 - NACE International corrosion conference 2012 (Proceedings) N2 - In Germany the “BAM-List - Requirements for Tanks for the Transport of Dangerous Goods” is the basis for substance-related prototype approvals for tank Containers undertaken by the BAM1 - Federal Institute for Materials Research and Testing. Compatibility evaluations of selected metallic materials as well as of polymeric gasket and lining materials under the influence of approximately 7200 dangerous goods have been published in the BAM-List since 1989. The ferritic Steel UNS S44400 (X2CrMoTil8-10, 1.4521) was originally developed as alternative for the austenitic grade AISI316L (X2CrNiMo 17-12-2, 1.4404). Due to its characteristic profile this Steel was qualified for applications requiring high strength values at concomitant adequate corrosion resistance. Because of the lack of Nickel this Steel is a cost-efficient alternative to the Ni-containing austenites. No corrosion test results of UNS S44400 under the influence of dangerous goods were published in the BAM-List so far. Only data on the behavior of AISI 316L are listed. Therefore test specimens of this Steel were exposed to selected corrosive substances in order to compare both steels. Due to the reduced alloy content a reduced corrosion resistance of the Steel UNS S44400 in acidic substances, such as formic acid, acetic acid and sulfuric acid, in comparison to the austenitic CrNiMosteels was expected but not observed. Tests in an alkaline medium showed sufficient resistance. T2 - NACE International Corrosion Conference 2012 CY - Salt Lake City, USA DA - 01.03.2012 KW - Steel KW - Dangerous goods KW - Transport tanks KW - Duplex steel KW - Corrosion KW - 1.4362 KW - X2CrNiN23-4 PY - 2012 SP - 1-7 (C2012-0001290) AN - OPUS4-25979 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Werner, Jan A1 - Brandt, S. T1 - Compatibility of high density polyethylene grades with bioethanol-gasoline blends and biodiesel T2 - EUROCORR 2012 - The European corrosion congress T2 - EUROCORR 2012 - The European corrosion congress CY - Istanbul, Turkey DA - 2012-09-09 PY - 2012 SP - 1 EP - 12(?) AN - OPUS4-26534 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Werner, Jan A1 - Brandt, S. T1 - Compatibility of high density polyethylene grades with bioehanol-gasoline blends and biodiesel T2 - EUROCORR T2 - EUROCORR CY - Istanbul, Turkey DA - 2012-09-09 PY - 2012 AN - OPUS4-26683 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Schädenb an Tanks zum Transport von Gefahrgütern T2 - GfKORR Jahrestagung 2012 : Aus Schaden wird man klug T2 - GfKORR Jahrestagung 2012 : Aus Schaden wird man klug CY - Frankfurt am Main, Germany DA - 2012-11-06 PY - 2012 AN - OPUS4-26906 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Schäden an Tanks zum Transport von Gefahrgütern T2 - GfKORR-Jahrestagung 2012 - Aus Schaden wird man klug T2 - GfKORR-Jahrestagung 2012 - Aus Schaden wird man klug CY - Frankfurt/M., Germany DA - 2012-11-06 KW - Tankcontainer KW - Tankfahrzeuge KW - Eisenbahnkesselwagen KW - Gefahrguttransport KW - Korrosionsschäden KW - Schadensursachen PY - 2012 SN - 978-3-935406-49-9 SP - 1 EP - 10(?) PB - DECHEMA AN - OPUS4-26939 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Beständigkeit von Polythylenformstoffen und Dichtungswerkstoffen gegenüber Biokraftstoffen T2 - Gefahrgut-Technik-Tage Verpackungen, BAM T2 - Gefahrgut-Technik-Tage Verpackungen, BAM CY - Berlin, Germany DA - 2012-11-12 PY - 2012 AN - OPUS4-26955 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Beständigkeit von Polyethylenformstoffen und Dichtungswerkstoffen gegenüber Biokraftstoffen T2 - BAM 13. Gefahrgut-Technik-Tage Verpackungen + IBC, BAM T2 - BAM 13. Gefahrgut-Technik-Tage Verpackungen + IBC, BAM CY - Berlin, Germany DA - 2012-11-12 PY - 2012 AN - OPUS4-27211 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit T1 - Beständigkeit von Polyethylenformstoffen und Dichtungswerkstoffen gegenüber Biokraftstoffen T2 - 13. Gefahrgut-Technik-Tage Verpackungen + IBC T2 - 13. Gefahrgut-Technik-Tage Verpackungen + IBC CY - Berlin, Germany DA - 2012-11-12 KW - Biokraftstoffe KW - Beständigkeit KW - Polyethylen KW - Verpackungen KW - Dichtungswerkstoffe PY - 2012 UR - http://www.storck-verlag.de/gtt/2012/09_weltschev.pdf SP - 1 EP - 48 PB - Storck AN - OPUS4-27135 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Bäßler, Ralph T1 - Einsatz von höherlegierten metallischen Werkstoffen, ferritischen Chromstählen und Duplexstählen für den Transport von Gefahrgütern T2 - GfKORR: Sitzung des AK - Korrosion undl Korrosionsschutz T2 - GfKORR: Sitzung des AK - Korrosion undl Korrosionsschutz CY - Duisburg, Germany DA - 2012-06-14 PY - 2012 AN - OPUS4-26088 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Bäßler, Ralph T1 - Evaluation of the resistance of metallic and polymeric materials used for tanks for the transport of dangerous goods T2 - ACHEMA T2 - ACHEMA CY - Frankfurt am Main, Germany DA - 2012-06-20 PY - 2012 AN - OPUS4-26089 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weltschev, Margit A1 - Schwarzer, Stefanie A1 - Otremba, Frank ED - Pierucci, S. ED - Klemes, J.J. ED - De Rademaeker, E. ED - Fabiano, B. ED - Buratti, S.S. T1 - Comparison of the operating life of tank containers, tank vehicles and rail cars for the carriage of dangerous goods in practice, analysis of causes of damage T2 - Proceedings of the 14th EFCE symposium on loss prevention and safety promotion in the process industries N2 - More than 400 Mt of dangerous materials are transported in Germany every year, of which 150 Mt are by road. Tank containers, tank vehicles and rail tank cars are used for the carriage of dangerous goods in large quantities. Data on the operating life of tanks are only available, in practice, to a minor degree. They are only partly published, mainly after accidents. The BAM-List - Requirements for Tanks for the Carriage of Dangerous Goods, which has compatibility evaluations of metallic and polymeric materials, has been the basis for substance-related prototype approvals for tank containers and portable tanks designed for the carriage of dangerous goods by the BAM since publication of the first edition in 1989. These data are also used for the approval of rail tank cars and road tank cars and are used as a source of knowledge not only in Germany but also worldwide. Tank leakages caused by tanks or rail tank cars being made of tank and sealing materials which are not resistant to the fill goods are avoided by using the material resistance data of the BAM. Corrosion damage is among the main causes of damage. Uniform and non-uniform area corrosion without mechanical stress in aqueous substances is one of the most frequent types of corrosion during the transport of chemicals in tanks. Much damage by pitting corrosion occurs during the transport of substances containing chlorides or substances which separate chloride ions in the presence of moisture. Operational stresses are caused by the effects of both the road and the dangerous goods being transported. Mechanical damage often results from long-term overstressing and occurs after longer operating times. Operational failures cause damage which may appear during the service of tank containers, road tank cars or rail tank cars. The damage results from the inattention of employees when opening and closing the valves. Traffic accidents also cause damage to tanks and frames. Many cases of damage are due to weld area cracks resulting from four basic errors in construction, material, manufacturing and operation. Manufacturing errors can be undetected and the starting point of cracks which only grow under service conditions. Manufacturing errors result from variations in measurement and design, fittings, state of surface (hardness, abrasiveness) and mechanical surface damage (scratches, cracks). Incorrectly welded joints and errors during mechanical deformation are typical mistakes when installing the component parts. Variations in the wall thickness or combinations of different materials lead to manufacturing errors too. A lot of tanks are not used for the transport of dangerous goods before the end of their service life as they do not fulfil the revised technical safety requirements in the Dangerous Goods Regulations. Predictions in the BAM-List based on literature data and corrosion test results are reflected in the service (operating) life. Rail tank cars made of carbon steel, for example, which are mainly used for the transport of petroleum products, can achieve a service life of 40 – 50 y. Rail tank cars produced of austenitic CrNi- or CrNiMo-steel can reach an operating life of at least 30 y, whereby the corrosiveness of the transport substances plays an important role. T2 - 14th International symposium on loss prevention and safety promotion in the process industries CY - Florence, Italy DA - 12.05.2013 KW - Gefahrguttanks KW - Eisenbahnkesselwagen KW - Schadensursachen KW - Lebensdauer PY - 2013 SN - 978-88-95608-22-8 DO - https://doi.org/10.3303/CET1331094 SN - 1974-9791 N1 - Serientitel: Chemical engineering transactions – Series title: Chemical engineering transactions IS - 31 SP - 559 EP - 564 PB - AIDIC, Associazione Italiana di Ingegneria Chimica CY - Milano AN - OPUS4-28568 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weltschev, Margit A1 - Niebergall, Ute A1 - Werner, Jan T1 - Comparison of the material parameters of polyethalene grades with the test performance behaviour of packagings for the transport of dangerous goods in relation to the pre-storage time with 55% nitric acid JF - Packaging technology & science N2 - The material parameters melt flow rate (MFR), density (D), notched impact strength (NIS) at –30°C, stress crack resistance [determined with the Full Notch Creep Test (FNCT)] and resistance to oxidative degradation (Ox) have been selected for a comparison of polyethylene grades in the European standard EN 15507. These parameters have a relationship with design type tests of packagings for the transport of dangerous goods. This paper presents the results of additional investigations to determine the impact of the pre-storage time of jerricans with 55% nitric acid at 40°C and 23°C on the marginal drop heights in drop tests at –18°C, on the MFR and on the tensile properties. Jerricans made of different polyethylene grades were pre-stored with 55% nitric acid for 21, 42 and 84 days at 40°C and for six months at 23°C. The tests showed that the NIS values at –30°C of polyethylene grades were not comparable with marginal drop heights determined in drop tests at –18°C. Pre-damage with 55% nitric acid for 21 days at 40°C led to an increase in the marginal drop heights of the jerricans. Altering the test regulations by increasing pre-storage time with 55% nitric acid to 42 days would be an alternative. The test results demonstrated clearly that pre-storage of the jerricans for six months at 23°C caused a higher increase in the MFR and lower marginal drop heights for the jerricans when compared with pre-stored jerricans for 21 days at 40°C. KW - Polyethylene grades KW - Resistance to oxidative degradation KW - Nitric acid KW - Tensile properties KW - Packagings for the transport of dangerous goods KW - Drop tests PY - 2013 DO - https://doi.org/10.1002/pts.2037 SN - 0894-3214 VL - 27 SP - 409 EP - 421 PB - Wiley CY - Chichester, UK AN - OPUS4-28731 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -