TY - JOUR
A1 - Weidner, Steffen
A1 - Decker, R.
A1 - Holländer, A.
T1 - Derivatization of Double Bonds investigated by Matrix-assisted Laser Desorption/Ionization Mass Spectrometry
PY - 1997
SN - 0951-4198
SN - 1097-0231
VL - 11
SP - 914
EP - 918
PB - Wiley
CY - Chichester
AN - OPUS4-11097
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Weidner, Steffen
A1 - Wolff, D.
A1 - Springer, J.
T1 - Phase Behaviour of Copolymers Containing Cholesterol and 4,4' Methoxybiphenyl as Mesogenic Group
PY - 1996
SN - 0267-8292
SN - 1366-5855
VL - 20
IS - 5
SP - 587
EP - 593
PB - Taylor & Francis
CY - London
AN - OPUS4-11094
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Yu, Z.
A1 - Weidner, Steffen
A1 - Risse, T.
A1 - Hecht, S.
T1 - The role of statistics and microenvironment for the photoresponse in multi-switch architectures: The case of photoswitchable oligoazobenzene foldamers
N2 - Systems containing multiple photochromic units possibly display a synergistic interplay of individual switching events and hence potentially give rise to unprecedented photoresponsive behavior. Among such systems photoswitchable foldamers are attractive as the photoisomerization events are coupled to the helixcoil conformational transition. To gain comprehensive insight into the role of the number of switching units (statistics) as well as their specific location and relative orientation in the helix backbone, several series of foldamers have been synthesized and characterized. In these series of foldamers, the local environment of the photoswitchable units was precisely tuned as π,π-stacking interactions were enforced to occur between specific pairs, i.e. azobenzene–azobenzene, azobenzene–tolane, or phenylene–phenylene units. These particular arrangements are reflected not only in the stability of the helical conformation, but also affect the photoresponsive behavior, i.e. the rate of photoisomerization and extent of denaturation. Furthermore, determining the intramolecular spin–spin distance in a series of TEMPO-labeled foldamers with variable chain lengths and different spatial locations of the spin-labels deduced an independent verification of the photoinduced helix–coil transition by ESR spectroscopy. Quantitative analysis of the corresponding ESR spectra shows an excellent correlation of the extent of intramolecular spin–spin coupling and the intensity of the Cotton effect in CD spectroscopy. From all of these results an unusual relationship between the rate of photoisomerization and the extent of photoinduced denaturation could be unraveled, as they are not going hand-in-hand but compete with each other, i.e. the easier the individual switching event is, the harder it becomes to achieve a high degree of unfolding. This insight into the effect of microenvironment on the ease of individual switching events and the role of statistics on the resulting degree of the overall conformational transition is of general interest for the design of multi-switch architectures with improved photoresponse.
KW - Polymers
KW - Photoswitchable
KW - Oligoazobenzene
KW - Foldamers
PY - 2013
DO - https://doi.org/10.1039/c3sc51664d
SN - 2041-6520
SN - 2041-6539
VL - 4
IS - 11
SP - 4156
EP - 4167
PB - RSC
CY - Cambridge
AN - OPUS4-29814
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, H. R.
A1 - Weidner, Steffen
A1 - Scheliga, F.
T1 - Cyclic Polylactides via Simultaneous Ring-Opening Polymerization and Polycondensation Catalyzed by Dibutyltin Mercaptides
N2 - L-Lactide is polymerized in bulk at 160 8C either with dibutyltin bis(benzylmercaptide) (SnSBzl), dibutyltin bis(benzothiazole 2-mercaptide) (SnMBT), or with dibutyltin bis(pentafluorothiophenolate) (SnSPF) as catalysts. SnSBzl yields linear polylactides having benzylthio-ester end groups in addition to cyclic polylactides, whereas SnMBT and SnSPF mainly or exclusively yield cyclic polylactides. This finding, together with model reactions, indicates that the SnS catalysts promote a combined ring-opening polymerization and polycondensation process including end-to-end cyclization. SnMBT caused slight racemization (3%–5%), when used at 160 8C. With SnSPF optically pure cyclic poly(L-lactide)s with high-molecular weights can be prepared at 160 8C.
KW - Cyclopolymerization
KW - Catalysts
KW - MALDI-TOF MS
KW - Polyester
KW - Ring-opening polymerization
PY - 2017
DO - https://doi.org/10.1002/pola.28762
VL - 55
IS - 22
SP - 3767
EP - 3775
PB - Wiley Periodicals
AN - OPUS4-42600
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Meyer, Andreas
A1 - Weidner, Steffen
A1 - Kricheldorf, Hans R.
T1 - Star-shaped poly(l-lactide)s based on pentaerythritol: About crystallization and polycondensation plus disproportionation and ring formation in the solid state
N2 - Star-shaped poly( L-lactide)s (s-PLAs), were prepared by ring-opening polymerization of with pentaerythritol and catalyzed by tin(II) 2-ethylhyexanoate (SnOct out in bulk at either 120 ◦ C or 160 ◦ L-lactide (LA) initiated 2 ). Two small series of ROPs were carried C with variation of the LA/initiator ratio. Matrix-assisted laser desorption/ ionization time-of-flight (MALDI-TOF) mass spectra revealed traces of cycles in 120 ◦ C samples only at low initiator/catalyst ratios. In contrast, higher fractions of cycles were detected in samples prepared at 160 C, suggesting a "back-biting" origin. The influence of arm length and thermal history on crystallinity was investigated by differential scanning calorimetry (DSC) and wide-angle x-ray scattering (WAXS). It was shown that annealing increased the melting temperature (T ◦ ◦ m ) and crystallinity. However, annealing at 140 ◦ C for 14 d also caused significant solid-state transesterification. In addition, crystallites composed of s-PLAs with extended arms and, simultaneously, crystallites composed exclusively of extended rings were formed, identified by their typical "sawtooth" pattern in the MALDI mass spectra. Small angle x-ray scattering (SAXS) indicated that the crystal thickness was lower than that of linear PLAs annealed under identical conditions, but increased upon annealing at 140 C.
KW - MALDI-TOF MS
KW - Polylactide
KW - Crystallisation
KW - AStar-shaped polymers
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-636832
DO - https://doi.org/10.1016/j.polymer.2025.128709
SN - 0032-3861
VL - 334
SP - 1
EP - 11
PB - Elsevier Ltd.
AN - OPUS4-63683
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, Hans R.
A1 - Weidner, Steffen
T1 - H2O-Initiated Polymerization of L-Lactide
N2 - Water-initiated ring-opening polymerizations (ROPs) of L-lactide (LA) were performed in bulk at 140 °C, whereupon 11 different salts or complexes of low-toxic metal ions such as tin (II), Zn(II), Zr(IV), and Bi(III) were used as catalysts. Only four catalysts gave satisfactory results despite a long reaction time (24 h). The influence of the temperature was studied with tin (II) 2-ethylhexanoate (SnOct2), dibutyltin oxide (Bu2SnO), and zinc bis-acetylacetonate (Zn(acac)2) and zirconium acetylacetonate (Zr(acac)4). With SnOct2, Bu2SnO and Zr(acac)4 the time was varied at 140 °C to compare their reactivity. Furthermore, two series of ROPs were carried out with variation of the LA/H2O ratio to verify the control of the molecular weight by the monomer-initiator ratio. Bi- or tri-modal molecular weight distributions (MWD) were found for most of the ROPs and bimodal melting endotherms in the differential scanning calorimetry (DSC) heating traces. The thickness and dependence of the 3D packing of the crystallites were monitored by small-angle X-ray scattering (SAXS) measurements.
KW - MALDI-TOF MS
KW - Polylactide
KW - Ring-opening polymerization
KW - Crystallization
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-628761
DO - https://doi.org/10.1007/s10924-025-03565-w
SN - 1572-8919
VL - 33
IS - 6
SP - 2843
EP - 2857
PB - Springer Science and Business Media LLC
CY - New York, NY
AN - OPUS4-62876
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Becker, Roland
A1 - Scholz, Philipp
A1 - Jung, Christian
A1 - Weidner, Steffen
T1 - Thermo-Desorption Gas Chromatography-Mass Spectrometry for investigating the thermal degradation of polyurethanes
N2 - Thermo-Desorption Gas Chromatography-Mass Spectrometry (TD-GC-MS) was used to investigate the thermal degradation of two different polyurethanes (PU). PU samples were heated at different heating rates and the desorbed products were collected in a cold injection system and thereafter submitted to GC-MS. Prospects and limitations of the detection and quantification of semi-volatile degradation products were investigated. A temperature dependent PU depolymerization was
found at temperatures above 200 °C proved by an increasing release of 1,4-butanediol and methylene diphenyl diisocyanate (MDI) representing the main building blocks of both polymers. Their release was monitored quantitatively based on external calibration with authentic compounds. Size Exclusion Chromatography (SEC) of the residues obtained after thermodesorption confirmed the initial competitive degradation mechanism indicating an equilibrium of crosslinking and depolymerization as previously suggested. Matrix-Assisted Laser Desorption Ionization (MALDI) mass spectrometry of SEC fractions of thermally degraded PUs provided additional hints on degradation mechanism.
KW - Thermo-desorption
KW - Mass spectrometry
KW - Polyurethanes
KW - Thermal degradation
PY - 2023
DO - https://doi.org/10.1039/D3AY00173C
SN - 1759-9660
SP - 1
EP - 6
PB - Royal Society for Chemistry
AN - OPUS4-57307
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Weidner, Steffen
A1 - Scheliga, Felix
A1 - Kricheldorf, Hans R.
T1 - Polycondensation, Cyclization and Disproportionation of Solid Poly(L-lactide) Trifluoroethyl Esters and the Simultaneous Formation of Extended Chain Crystals and Extended Ring Crystals
N2 - Two poly(L-lactide)s (PLAs) with a degree of polymerization (DP) of 20 or 100 were prepared by trifluoroethanol-initiated ring-opening polymerization (ROP) catalyzed by tin(II) 2-ethyl hexanoate (SnOct2). These PLAs were annealed at 140 ◦C or at 160 ◦C in the presence of SnOct2, and the changes in topology and molecular weight distribution (MWD) were monitored by matrix-assisted laser desorption/ionization time-of flight (MALDI TOF) mass spectrometry and gel permeation chromatography (GPC). For the PLA with a DP 20, the main reaction was polycondensation combined with higher dispersities. In the case of the DP 100, PLA polycondensation was combined with disproportionation and the formation of a new MWD maximum around m/z 3500. In addition, extensive cyclization occurred, and the resulting cyclic PLAs crystallized separately from the linear chains in the form of extended ring crystals. These results also suggest that both extended chain and extended ring crystals posses the same crystal thickness as a result of thermodynamically controlled transesterification in the solid state.
KW - Polycondensation
KW - MALDI
KW - Polylactide
KW - Cyclization
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-616441
DO - https://doi.org/10.1016/j.polymer.2024.127800
VL - 315
SP - 1
EP - 9
PB - Elsevier Ltd.
AN - OPUS4-61644
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, Hans R.
A1 - Weidner, Steffen
A1 - Scheliga, Felix
T1 - Polycondensation of L-lactic acid: a deeper look into solid state polycondensation
N2 - L-Lactic acid (LA) was condensed in the presence of SnCl2 or 4-toluenesulfonic acid (TSA) at 140 °C, and chain growth without cyclization was observed. In addition, poly(L-lactic acid)s (PLAs) with a degree of polymerization (DP) of 25, 50 or 100 were prepared by water-initiated ring-opening polymerization (ROP). These PLAs were annealed in the solid state at 140 °C and 160 °C in the presence of tin(II) 2-ethylhexanoate (SnOct2, SnCl2 or TSA). The changes in the molar mass distribution and in the topology were characterized by means of matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry and size exclusion chromatography (SEC). With increasing time, fewer side reactions caused higher molar masses and increasing fractions of cyclic polylactides (cPLA) were obtained. Their “saw tooth” pattern in the MALDI-TOF mass spectra indicated the formation of extended ring crystallites in the solid state. TSA was the most active catalyst and caused fewer side reactions than SnCl2, which was the least reactive catalyst. Acetylation of the CH-OH end groups hindered polycondensation and prevented the formation of cPLAs. Reaction mechanisms will be discussed.
KW - MALDI-TOF MS
KW - Polycondensation
KW - Polylaktide
KW - Solid state
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-625271
DO - https://doi.org/10.1039/d4py01191k
SN - 1759-9962
SP - 1
EP - 9
PB - Royal Society of Chemistry (RSC)
AN - OPUS4-62527
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Rösler, Alexander
A1 - Weidner, Steffen
A1 - Klamroth, Tillmann
A1 - Müller, Axel HE
A1 - Schlaad, Helmut
T1 - Kinetics of anionic polymerization of β‐myrcene in hydrocarbon solvents
N2 - AbstractThe kinetics of anionic polymerization of β‐myrcene initiated by sec‐butyllithium were examined in saturated and unsaturated hydrocarbon solvents, i.e. cyclohexane, cyclohexene, 4‐vinylcyclohexene and dl‐limonene. Polymerizations usually proceeded in a living manner, i.e. in the absence of termination and chain transfer reactions, in all solvents, to produce well‐defined polymyrcenes with high content (85%) of cis‐1,4 units. However, polymyrcenyllithium chains exhibited limited long‐term stability in 4‐vinylcyclohexene solution, most probably due to chain transfer to solvent. Reaction orders with respect to the concentration of active chains were found to be one‐quarter in cyclohexane increasing to one‐half in unsaturated solvents, indicating that the polymyrcenyllithium chains are present as tetrameric or dimeric associates, respectively. Apparent activation energies were found to be 81 kJ mol−1 in cyclohexane and 77 kJ mol−1 in dl‐limonene solution, which are close to the values obtained by quantum chemical calculations. © 2025 The Author(s). Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
KW - Myrcene
KW - Anionic polymerization
KW - Reaction order
KW - Activation energy
KW - Microstructure
KW - Quantum chemical calculation
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-636840
DO - https://doi.org/10.1002/pi.6772
SN - 0959-8103
SP - 1
EP - 8
PB - Wiley
AN - OPUS4-63684
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Weidner, Steffen
A1 - Meyer, A.
A1 - Kricheldorf, H.
T1 - Cyclic polyglycolides via ring-expansion polymerization with cyclic tin catalysts
N2 - Glycolide was polymerized in bulk with two cyclic catalysts − 2,2-dibutyl-2-stanna-1,3-dithiolane (DSTL) and 2-stanna-1,3-dioxa-4,5,6,7-dibenzepane (SnBiph). The monomer/initiator ratio, temperature (140 – 180 °C) and time (1–––4 days) were varied. The MALDI TOF mass spectra exclusively displayed peaks of cyclic polyglycolide (PGA) and revealed an unusual “saw-tooth pattern” in the mass range below m/z 2 500 suggesting formation of extended ring crystallites. The DSC measurements indicated increasing crystallinity with higher temperature and longer time, and after annealing for 4 d at 160 °C a hitherto unknown and unexpected glass transition was found in the temperature range of 170–185 °C. Linear PGAs prepared by means of metal alkoxides under identical conditions did not show the afore-mentioned features of the cyclic PGAs, neither in the mass spectra nor in the DSC measurements. All PGAs were also characterized by SAXS measurements, which revealed relatively small L-values suggesting formation of thin crystallites in all cases with little influence of the reaction conditions.
KW - Polyglycolide
KW - MALDI-TOF MS
KW - Ring-expansion polymerization
KW - Crystals
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-595541
DO - https://doi.org/10.1016/j.eurpolymj.2024.112811
SN - 0014-3057
VL - 207
SP - 1
EP - 9
PB - Elsevier Ltd.
AN - OPUS4-59554
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, Hans R.
A1 - Weidner, Steffen
A1 - Meyer, A.
T1 - About Polycondensation, Disproportionation, and Cyclization of Acetylated Poly(L-Lactide) Esters
N2 - L-lactide (LA) is polymerized with ethyl L-lactate or trifluoroethanol as initiators (LA/In = 30/1), and the resulting poly(L-lactide) esters are acetylated with acetic anhydride. The acetylated PLA esters are mixed with SnOct2, dibutyltin bis(4-chlorophenoxide), or dibutyltin bis(pentafluorophenoxide) in solution and crystallized at 120 °C. The doped crystals are annealed at 140 °C or at 160 °C for 7, 14, and 28 days, and the chemical modifications that occurred in the solid state are monitored by matrix-assisted laser desorption/ionization time-of-flight (MALDI TOF) mass spectrometry, gel permeation chromatography (GPC), and differential scanning calorimetry (DSC) measurements. All catalysts promoted polycondensation, while no significant formation of cycles is observed. However, in the presence of SnOct2, disproportionation of chains occurred upon annealing at 120 or 140 °C, and crystallites consisting of extended chains with Mn values ≈3500 – 3600 and low dispersities (Ð < 1.5) are formed.
KW - MALDI-TOF MS
KW - Polycondensation
KW - Polylactides
KW - Transesterifcation
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-630349
DO - https://doi.org/10.1002/macp.202400175
SN - 1521-3935
VL - 225
IS - 19
PB - Wiley VHC-Verlag
AN - OPUS4-63034
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, H.
A1 - Weidner, Steffen
A1 - Scheliga, F.
T1 - Polycondensation of poly(L-lactide) alkyl esters combined with disproportionation and symproportionation of the chain lengths
N2 - Ring-opening polymerizations (ROPs) of l-lactide (LA) were performed with ethyl l-lactate or 11-bromoundecanol as initiators (In) and tin(II) ethyl hexanoate (SnOct2) as catalyst (Cat) using four different LA/In ratios (20/1, 40/1, 60/1, and 100/1). One series of ROPs was conducted in bulk at 120 °C, yielding PLAs with low dispersities (Ð ~ 1.2–1.4), and a second series was conducted in bulk at 160 °C, yielding higher dispersities (Ð ~ 1.3–1.9). Samples from both series were annealed for 1 or 14 days at 140 °C in the presence of SnOct2. Both polycondensation and disproportionation reactions occurred, so that all four samples tended to form the same type of molar mass distribution below 10,000 Da, regardless of their initially different number average molar masses (Mn). Both initiators gave nearly identical results. The thermodynamic control of all reversible transesterification processes favored the formation of crystallites composed of chains with a Mn around 3500–3700, corresponding to a crystal thickness of 10–13 nm.
KW - Polylactide
KW - MALDI-TOF MS
KW - Crystalinity
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-600081
DO - https://doi.org/10.1002/pol.20240118
SN - 2642-4150
SP - 1
EP - 12
PB - Wiley
AN - OPUS4-60008
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, H. R.
A1 - Weidner, Steffen
T1 - Syntheses of cyclic polylactides and the problem of catenane formation
N2 - Cyclic poly(L-lactide)s (PLAs) were prepared in bulk either by ring-expansion polymerization (REP) or by ring-opening polymerization (ROP) with simultaneous polycondensation (ROPPOC). In contrast to REP the latter method involves formation of linear chains and thus, may involve formation of polydisperse catenanes that affect crystallization. The reprecipitated PLAs were annealed at 120 °C and compared with regard to melting temperature (Tm) and melting enthalpy (ΔHm). For similar molar masses the PLAs prepared by REP and ROPPOC had almost identical Tm's and crystallinities. Furthermore, the influence of REP and ROPPOC catalysts on the morphology of the virgin reaction products was compared.
KW - MALDI-TOF MS
KW - Catenane
KW - Polylactide
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-625061
DO - https://doi.org/10.1039/d4ra08683j
VL - 15
IS - 5
SP - 3686
EP - 3692
PB - RSC
AN - OPUS4-62506
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, H.R.
A1 - Weidner, Steffen
T1 - Copolyesters of lactide, isosorbide, and terephthalic acid-biobased, biodegradable, high-Tg engineering plastics
N2 - Various copolyesters of lactide, isosorbide, and terephthalic acid are prepared by a two-step process performed in a 'one-pot' procedure, beginning with an isosorbide-initiated oligomerization of L-lactide followed by polycondensation with terephthaloyl chloride using SnCl2 as a catalyst for both steps. The SEC data show the formation of random copolyesters with high polydispersities as a consequence of the relatively high fraction of cyclics proved by matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS). The glass-transition temperatures (89–180 °C) obey an almost linear trend with the molar composition. The thermostability decreases with increasing lactide content. The successful incorporation of phenyl phosphate results in copolyesters of lower inflammability.
KW - Biodegradability
KW - Cyclization
KW - Isosorbide
KW - Polycondensation
KW - Ring-opening polymerization
PY - 2013
DO - https://doi.org/10.1002/macp.201200612
SN - 1022-1352
SN - 1521-3935
VL - 214
IS - 6
SP - 726
EP - 733
PB - Wiley-VCH Verl.
CY - Weinheim
AN - OPUS4-28171
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Weidner, Steffen
T1 - SFC of new liquid-crystalline cholesteryl esters
T2 - InCom '96, International Symposium on Instrumentalized Analytical Chemistry and Computer Technology
CY - Düsseldorf, Germany
DA - 1996-03-25
PY - 1996
AN - OPUS4-11194
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Weidner, Steffen
A1 - Kühn, Gerhard
A1 - Just, Ulrich
A1 - Werthmann, Barbara
A1 - Decker, Renate
A1 - Schwarz, Bärbel
A1 - Borowski, Renate
T1 - MALDI/MS - A New Technique in Characterizing Chemical Heterogeneity of Degradation Products of Poly(Ethylene Terephthalate)s
T2 - International GPC Symposium '96
CY - San Diego, CA, USA
DA - 1996-09-08
PY - 1996
SP - 632
EP - 651
CY - Milford, Mass.
AN - OPUS4-11905
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Weidner, Steffen
T1 - LC-MALDI coupling for the analysis of polymers
T2 - National Meeting of the Centre National de la Recherche Scientifique (CNRS)
CY - Strasbourg, France
DA - 2004-06-03
PY - 2004
AN - OPUS4-11308
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Robinson, J.W.
A1 - Secker, C.
A1 - Weidner, Steffen
A1 - Schlaad, H.
T1 - Thermoresponsive poly(N-C3 glycine)s
N2 - Ring-opening polymerization of N-substituted glycine N-carboxyanhydrides (NCAs) was applied to prepare a series of well-defined poly(N-C3 glycine)s (C3 = n-propyl, allyl, propargyl, and isopropyl), polypeptoids, with molecular weights in the range of 1.8–6.6 kg mol–1. Poly(N-isopropyl glycine), a previously unreported polypeptoid, could be obtained by bulk polymerization of the corresponding NCA in the melt. The samples were characterized by spectroscopy (NMR and FT-IR), size exclusion chromatography (SEC), and matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy (MALDI–ToF MS). The polymers could be dispersed in water up to 20–40 g L–1; the poly(N-propargyl glycine) was not soluble in water. Turbidity measurements of the three water-soluble polypeptoids illustrated cloud point temperatures dependent on structural and electronic properties of the side chain. The cloud point temperatures were found to increase in the order C3 = n-propyl (15–25 °C) < allyl (27–54 °C) < isopropyl (47–58 °C). Long-term annealing of the aqueous solution of poly(N-{n-propyl} glycine) and poly(N-allyl glycine) above the cloud point temperature resulted in the formation of crystalline microparticles with melting points of 188–198 and 157–165 °C (differential scanning calorimetry, DSC), respectively, and rose bud type morphology (scanning electron microscopy, SEM).
PY - 2013
DO - https://doi.org/10.1021/ma302412v
SN - 0024-9297
SN - 1520-5835
VL - 46
IS - 3
SP - 580
EP - 587
PB - American Chemical Society
CY - Washington, DC
AN - OPUS4-27696
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Chabbah, T.
A1 - Chatti, S.
A1 - Zouaoui, F.
A1 - Jlalia, A.
A1 - Gaiji, H.
A1 - Abderrazak, H.
A1 - Casablanca, H.
A1 - Mercier, R.
A1 - Weidner, Steffen
A1 - Errachid, A.
A1 - Marestin, C.
A1 - Jaffrezic-Renault, N.
T1 - New poly(ether-phosphoramide)s sulfides based on green resources as sensitive films for the specific impedimetric detection of nickel ions
N2 - For the development of selective and sensitive chemical sensors, we have developed a new family of poly(etherphosphoramide) polymers. These polymers were obtained with satisfactory yields by nucleophilic aromatic polycondensation using isosorbide as green resources, and bisphenol A with two novel difluoro phosphinothioic amide monomers. Unprecedented, the thiophosphorylated aminoheterocycles monomers, functionalized with two heterocyclic amine, N-methylpiperazine and morpholine were successfully obtained by nucleophilic substitution reaction of P(S)–Cl compound. The resulting polymers were characterized by different analytical techniques (NMR, MALDI–ToF MS, GPC, DSC, and ATG). The resulting partially green polymers, having tertiary phosphine sulfide with P–N side chain functionalities along the main chain of polymers are the sensitive film at the surface of a gold electrode for the impedimetric detection of Cd, Ni, Pb and Hg. The bio-based poly(etherphosphoramide) functionalized with N-methylpiperazine modified sensor showed better analytical performance
than petrochemical based polymers for the detection of Ni2+. A detection limit of 50 pM was obtained which is very low compared to the previously published electrochemical sensors for nickel detection.
KW - Poly(ether-phosphoramide)s sulfides
KW - Green chemistry
KW - Polymer film
KW - MALDI TOF MS
PY - 2022
DO - https://doi.org/10.1016/j.talanta.2022.123550
VL - 247
IS - 123550
SP - 1
EP - 9
PB - Elsevier B.V.
AN - OPUS4-54980
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - El Malah, T.
A1 - Rolf, Simone
A1 - Weidner, Steffen
A1 - Thünemann, Andreas
A1 - Hecht, S.
T1 - Amphiphilic folded dendrimer discs and their thermosensitive self-assembly in water
N2 - Folded dendrimers with peripheral ether side chains show a thermally induced hierarchical aggregation process, in which the transition temperature and the dimensions of the aggregates can readily be tuned via the generation number (see figure).
KW - Click chemistry
KW - Cotton effect
KW - Dendrimers
KW - Hierarchical self-assembly
KW - Thermochemistry
PY - 2012
DO - https://doi.org/10.1002/chem.201200414
SN - 0947-6539
SN - 1521-3765
VL - 18
IS - 19
SP - 5837
EP - 5842
PB - Wiley-VCH Verl.
CY - Weinheim
AN - OPUS4-25822
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Weidner, Steffen
A1 - Trimpin, S.
T1 - Mass Spectrometry of Synthetic Polymers
KW - Mass Spectrometry
KW - Polymers
KW - Application
PY - 2008
DO - https://doi.org/10.1021/ac8006413
SN - 0003-2700
SN - 1520-6882
VL - 80
IS - 12
SP - 4349
EP - 4361
PB - American Chemical Society
CY - Washington, DC
AN - OPUS4-17718
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, H.R.
A1 - Weidner, Steffen
A1 - Scheliga, F.
A1 - Lahcini, M.
T1 - Poly(epsilon-caprolactone) by combined ring-opening polymerization and polycondensation
N2 - Numerous water-initiated polymerizations of εCL are conducted in bulk with variation of catalyst, reaction time, and temperature. The conversions are determined by 1H NMR and the molar masses by SEC measurements. For polymerizations at 100 °C, Bi triflate and Hf triflate are used as catalysts, whereas at 140 °C, Al triflate, Sn(II) triflate, SnCl2, HfCl4, BiCl3, and LaCl3 are used. In addition to a closed reaction vessel, experiments are also performed with stirring in a vacuum. Under these conditions, the best catalyst (SnCl2) yields 2–3 times higher molar masses and mass spectra indicate a significant higher fraction of cyclic polymers. The results prove that a modification of the procedure may stimulate a polycondesation process without change of catalyst, time, and temperature.
KW - Epsilon-Caprolactone
KW - Cyclization
KW - MALDI-TOF mass spectrometry
KW - Polycondensations
KW - Ring-opening polymerizations
PY - 2012
DO - https://doi.org/10.1002/macp.201200061
SN - 1022-1352
SN - 1521-3935
VL - 213
IS - 14
SP - 1482
EP - 1488
PB - Wiley-VCH Verl.
CY - Weinheim
AN - OPUS4-26273
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Grabicki, N.
A1 - Nguyen, K. T. G.
A1 - Weidner, Steffen
A1 - Dumele, O.
T1 - Confined Spaces in [n]Cyclo-2,7-pyrenylenes
N2 - A set of strained aromatic macrocycles based on [n]cyclo2,7-(4,5,9,10-tetrahydro)pyrenylenes is presented with size dependent photophysical properties. The K-region of pyrene was functionalized with ethylene glycol groups to decorate the outer rim and thereby confine the space inside the macrocycle. This confined space is especially pronounced for n = 5, which leads to an internal binding of up to 8.0×104 M–1 between the ether-decorated [5]cyclo-2,7-pyrenylene and shape complementary crown ether–cation complexes.
Both, the ether-decorated [n]cyclo-pyrenylenes as well as one of their host–guest complexes have been structurally characterized by single crystal X-ray analysis. In combination with computational methods the structural and thermodynamic reasons for the exceptionally strong binding have been elucidated. The presented rim confinement strategy makes cycloparaphenylenes an attractive supramolecular host family with a favorable, size-independent read-out signature and binding capabilities extending beyond fullerene guests.
KW - Cycloparaphenylenes
KW - Host–guest systems
KW - Macrocycles
KW - Molecular recognition
KW - Supramolecular chemistry
PY - 2021
DO - https://doi.org/10.1002/anie.202102809
SN - 1433-7851
VL - 60
IS - 27
SP - 1
EP - 7
PB - Wiley VCH
AN - OPUS4-52517
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Cherbib, S.
A1 - Jlalia, I.
A1 - Chabbah, T.
A1 - Chatti, S.
A1 - Marestin, C.
A1 - Mercier, R.
A1 - Weidner, Steffen
A1 - Casabianca, H.
A1 - Jaffrezic-Renault, N.
A1 - Abderrazak, H.
T1 - Design of New Partially Bio-Based Polyguanamines for the Reversible Adsorption of Phenolic Molecules from Olive Mill Wastes
N2 - Olive mill wastewater produces a variety of potent antioxidants, including hydroxytyrosol, oleuropein, and tyrosol, that have been widely used in agriculture, pharmacy, and cosmetics. This study aims to design new poly(guanamine)s phases by polycondensation of modified triazine monomers with both petro-based and biosourced diamines, to act as stationary phases for the uptake of these phenolic molecules. Obtained polymers were characterized by NMR spectroscopy, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The adsorption results showed that the newly synthesized polymers can effectively uptake the less polar phenolic compounds, ferulic acid, and caffeic acid. The isosorbide-based polymer (P6) presented the highest sorption efficiency, due to the hydrophilic properties of isosorbide associated with the proton affinity of the triazine groups. All the phenolic compounds were successfully desorbed from the P6 polymer using a minimal amount of a methanol/acetonitrile mixture. P6 polymer could be used for four successive adsorption processes without loss of efficiency.
KW - Olive mill wastewater
KW - Triazine
KW - Isosorbide
KW - Adsorption
KW - Phenolic compounds
PY - 2024
DO - https://doi.org/10.1007/s42250-024-01081-3
SN - 2522-5758
SP - 1
EP - 11
PB - Springer Science and Business Media LLC
AN - OPUS4-61348
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Weidner, Steffen
A1 - Trimpin, s.
T1 - Mass Spectrometry of Synthetic Polymers
KW - Polymere
KW - Massenspektrometrie
KW - MALDI
PY - 2010
DO - https://doi.org/10.1021/ac101080n
SN - 0003-2700
SN - 1520-6882
VL - 82
IS - 12
SP - 4811
EP - 4829
PB - American Chemical Society
CY - Washington, DC
AN - OPUS4-21623
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CHAP
A1 - Weidner, Steffen
ED - Matyjaszewski, K.
ED - Möller, M.
T1 - Mass spectrometry: MALDI (Matrix-Assisted Laser Desorption/Ionization) and ESI (Electrospray Ionization)
N2 - In recent years mass spectrometric methods, in particular matrix-assisted laser desorption/ionization (MALDI) and electrospray ionization (ESI) time-of-flight (TOF) mass spectrometry (MS) have become indispensable tools for analyzing molecular masses and mass distributions of polymers. Moreover, these techniques offer the advantage of being able to determine simultaneously chemical functionality, and compositional and topological distributions of polymers. Especially in combination with liquid and/or gas phase separation methods, a comprehensive polymer characterization can be achieved and the difficulties of MS to analyze chemically heterogeneous polymers, copolymers, and samples with broad molecular mass distribution can be overcome.
KW - MALDI
KW - ESI
KW - Polymere
KW - Electrospray ionization
KW - Mass spectrometry
KW - Matrix-assisted laser desorption/ionization
KW - Tandem MS
KW - Time of flight
PY - 2012
SN - 978-0-444-53349-4
DO - https://doi.org/10.1016/B978-0-444-53349-4.00023-6
VL - 2
IS - Chapter 2.05
SP - 93
EP - 109
PB - Elsevier
CY - Amsterdam
AN - OPUS4-26098
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Meyer, A.
A1 - Kricheldorf, H. R.
A1 - Weidner, Steffen
T1 - ROPs of L-lactide catalyzed by neat Tin(II)2-ethylhexanoate - Influence of the reaction conditions on Tm and ΔHm
N2 - L-Lactide was polymerized by means of neat SnOct2 with variation of LA/Cat ratio, temperature and time. The resulting cyclic polylactides crystallized spontaneously at 160 °C or below, but needed nucleation via mechanical stress at 165 or 170 °C. All the crystalline polylactides obtained directly from ROP above 120 °C had melting temperatures (Tm) above 189 °C (up to 194.5 °C). SnOct2 also enabled transformation of low Tm poly(L-lactide)s (Tm <180 °C) into the high Tm m1odification by annealing, due to the impact of transesterification reactions in the interphase between the crystallites. The influence of crystallization temperature and annealing time on the crystal thickness was studied via SAXS measurements. A comparison with the crystallization and annealing experiments reported by Pennings and coworkers and Tsuji and Ikada is discussed, and a satisfactory agreement has been found, because those authors also studied polyLA samples containing SnOct2 in its active form. It is also demonstrated in this work that the high Tm modification cannot be obtained when the catalyst is removed or poisoned as it is true for commercial polylactides.
KW - Polylactide
KW - MALDI-TOF MS
KW - Crystallization
PY - 2021
DO - https://doi.org/10.1016/j.polymer.2021.124122
SN - 0032-3861
VL - 231
SP - 1
EP - 10
PB - Elsevier
CY - Oxford
AN - OPUS4-53194
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Weidner, Steffen
A1 - Falkenhagen, Jana
T1 - Imaging mass spectrometry for examining localization of polymeric composition in matrix-assisted laser desorption/ionization samples
N2 - The localization of polymeric composition in samples prepared for matrix-assisted laser desorption/ionization (MALDI) analysis has been investigated by imaging mass spectrometry. Various matrices and solvents were used for sample spot preparation of a polybutyleneglycol (PBG 1000). It was shown that in visibly homogeneous spots, prepared using the dried droplet method, separation between matrix and polymer takes place. Moreover, using -cyano-4-hydroxycinnamic acid (CCA) as matrix and methanol as solvent molecular mass separation of the polymer homologues in the spots was detectable. In contrast to manually spotted samples, dry spray deposition results in homogeneous layers showing no separation effects.
KW - Imaging
KW - MALDI TOF Massenspektrometrie
KW - Polymere
PY - 2009
DO - https://doi.org/10.1002/rcm.3919
SN - 0951-4198
SN - 1097-0231
VL - 23
IS - 5
SP - 653
EP - 660
PB - Wiley
CY - Chichester
AN - OPUS4-19622
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Gabriel, Stefan
A1 - Pfeifer, Dietmar
A1 - Schwarzinger, C.
A1 - Panne, Ulrich
A1 - Weidner, Steffen
T1 - Matrix-assisted laser desorption/ionization time-of-flight mass spectrometric imaging of synthetic polymer sample spots prepared using ionic liquid matrices
N2 - RATIONALE
Polymer sample spots for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) prepared by the dried-droplet method often reveal ring formation accompanied by possible segregation of matrix and sample molecules as well as of the polymer homologs itself. Since the majority of sample spots are prepared by this simple and fast method, a matrix or sample preparation method that excludes such segregation has to be found.
METHODS
Three different ionic liquid matrices based on conventionally used aromatic compounds for MALDI-TOF MS were prepared. The formation of ionic liquids was proven by 1H NMR spectroscopy. MALDI-Imaging mass spectrometry was applied to monitor the homogeneity.
RESULTS
Our results show a superior sample spot homogeneity using ionic liquid matrices. Spots could be sampled several times without visible differences in the mass spectra. A frequently observed loss of matrix in the mass spectrometer vacuum was not observed. The necessary laser irradiance was reduced, which resulted in less polymer fragmentation.
CONCLUSIONS
Ionic liquid matrices can be used to overcome segregation, a typical drawback of conventional MALDI dried-droplet preparations. Homogeneous sample spots are easy to prepare, stable in the MS vacuum and, thereby, improve the reproducibility of MALDI.
PY - 2014
DO - https://doi.org/10.1002/rcm.6810
SN - 0951-4198
SN - 1097-0231
VL - 28
IS - 5
SP - 489
EP - 498
PB - Wiley
CY - Chichester
AN - OPUS4-30267
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - You, Zengchao
A1 - Meier, Florian
A1 - Weidner, Steffen
ED - Weidner, Steffen
T1 - Comparison of miniaturized and conventional asymmetrical flow field flow fractionation (AF4) channels for nanoparticle separation
N2 - The performance of a miniaturized channel for the separation of polymer and metal nanoparticles (NP) using Asymmetrical Flow Field-Flow Fractionation (AF4) was investigated and compared with a conventional AF4 system. To develop standard separation methods, experimental parameters like cross flow, gradient profile and injection time were varied and optimized.
Corresponding chromatographic parameters were calculated and compared. Our results indicate that the chromatographic resolution in the miniaturized channel is lower, whereas significantly shorter analyses time and less solvent consumption were obtained. Moreover, the limit of detection (LOD) and limit of quantification (LOQ) obtained from hyphenation with a UV-detector are obviously lower than in a conventional channel, which makes the miniaturized channel interesting for trace analysis.
KW - Nanoparticles separation asymetrical flow field flow fractionation
PY - 2017
DO - https://doi.org/10.3390/separations4010008
SN - 2297-8739
VL - 4
IS - 1
SP - 8, 1
EP - 11
AN - OPUS4-47196
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Gabriel, Stefan
A1 - Schwarzinger, C.
A1 - Schwarzinger, B.
A1 - Panne, Ulrich
A1 - Weidner, Steffen
T1 - Matrix segregation as the major cause for sample inhomogeneity in MALDI dried droplet spots
N2 - The segregation in dried droplet MALDI sample spots was analyzed with regard to the matrix-to-sample ratio using optical microscopy, MALDI imaging mass spectrometry (MALDI MSI) and IR imaging spectroscopy. In this context, different polymer/matrix/solvent systems usually applied in the analysis of synthetic polymers were investigated. The use of typical matrix concentrations (10 mg mL-1) in almost every case resulted in ring patterns, whereas higher concentrated matrix solutions always led to homogeneous sample spot layers. The data revealed that segregation is predominantly caused by matrix transport in the drying droplet, whereas polymer segregation seems to be only secondary.
KW - MALDI
KW - Imaging MS
KW - Matrix segregation
KW - Dried droplet
KW - Sample preparation
KW - Polymers
PY - 2014
DO - https://doi.org/10.1007/s13361-014-0913-0
SN - 1044-0305
VL - 25
IS - 8
SP - 1356
EP - 1363
PB - American Society for Mass Spectrometry
CY - New York, NY
AN - OPUS4-32582
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, Hans
A1 - Weidner, Steffen
T1 - High molar mass cyclic poly(L-lactide) via ring-expansion polymerizationwith cyclic dibutyltin bisphenoxides
N2 - Two new catalysts (SnNa and SnBi) were prepared from dibutyltin oxide and 2,2′-dihydroxybiphenyl or2,2′dihydroxy(1,1′-binaphtyl). These catalysts enabled rapid polymerizations of L-lactide at 160 or 180 °C in bulk, whereby almost exclusively cyclic polylactides were formed. These polymerizations were free of racemization and yielded pol(L-lactide)s having weight average molecular weights (Mw's) up to 140 000 g mol−1. The Mw's varied little with the Lac/Cat ratio as expected for a ring expansion polymerization (REP). Polymerizations performed in bulk at 140, 120 and 102 °C yielded cyclic polylactides with lower molecular weights. At 102 °C a strong predominance of even-numbered cycles was found with SnNa as catalyst. SnNa can also catalyze alcohol-initiated ROPs yielding linear poly(L-lactide) free of cyclics.
KW - MALDI-TOF MS
KW - Polylactide
KW - Ring-opening Polymerization
KW - Cyclization
KW - Catalysts
PY - 2018
DO - https://doi.org/10.1016/j.eurpolymj.2018.05.036
SN - 0014-3057
SN - 1873-1945
VL - 105
SP - 158
EP - 166
PB - Elsevier Ltd.
AN - OPUS4-45439
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Jlalia, I.
A1 - Chabbah, T.
A1 - Chatti, S.
A1 - Schiets, F.
A1 - Casabianca, H.
A1 - Marestin, C.
A1 - Mercier, R.
A1 - Weidner, Steffen
A1 - Kricheldorf, H. R.
A1 - Errachid, A.
A1 - Vulliet, E.
A1 - Hammani, M.
A1 - Jaffrezic-Renault, N.
T1 - Alternating bio-based pyridinic copolymers modified with hydrophilic and hydrophobic spacers as sorbents of aromatic pollutants
N2 - The main objective of this work was to design new advanced sorbent phases, alternating copolymers, derived from isosorbide and 2,6-difluorpyridine, to be used for the removal of aromatic organic pollutants present in water at low concentrations. Six different monomers, dianhydrohexitols isomers and bisphenol derivatives, weresynthesized in order to make it possible to study their hydrophilic and hydrophobiceffect on the sorption efficiency of the resulting polymeric phases. Before this study, we have confirmed the chemicals structures, molecular weights, and thermal properties of the obtained polymeric phases. Sorption results show a higher adsorption efficiency of P6 co-poly(ether-pyridine) based on bisphenol substituted with pyridineunits, for all tested pollutants, hydrophobic and hydrophilic ones, due to its less compact structure. Two aromatic organic pollutants, p-hydroxybenzoic acid and toluicacid, were selected as sorbates to study the adsorption characteristic, kinetics and isotherms of the copoly(ether pyridine) P6. Langmuir model led to a better fitting of the sorption isotherms; the sorption of toluic acid is easier than of that p-hydroxybenzoic acid. Comparing 1/n values for benzoic acid was two time lower for P6 compared to that for biochar and for crosslinked methacrylate resin, showing a higher efficiency
KW - Alternating co-poly(ether pyridine)s
KW - Aromatic organic compounds,
KW - Biosourced isosorbide
KW - Sorption isotherm
KW - Sorption mechanism
PY - 2021
DO - https://doi.org/10.1002/pat.5578
VL - 33
IS - 4
SP - 1057
EP - 1068
PB - Wiley Online Library
AN - OPUS4-54031
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Koshkina, Olga
A1 - Lang, Thomas
A1 - Thiermann, R.
A1 - Docter, D.
A1 - Stauber, R.H.
A1 - Secker, C.
A1 - Schlaad, H.
A1 - Weidner, Steffen
A1 - Mohr, B.
A1 - Maskos, M.
A1 - Bertin, Annabelle
T1 - Temperature-triggered protein adsorption on polymer-coated nanoparticles in serum
N2 - The protein corona, which forms on the nanoparticle's surface in most biological media, determines the nanoparticles physicochemical characteristics. The formation of the protein corona has a significant impact on the biodistribution and clearance of nanoparticles in vivo. Therefore, the ability to influence the formation of the protein corona is essential to most biomedical applications, including drug delivery and imaging. In this study, we investigate the protein adsorption on nanoparticles with a hydrodynamic radius of 30 nm and a coating of thermoresponsive poly(2-isopropyl-2-oxazoline) in serum. Using multiangle dynamic light scattering (DLS) we demonstrate that heating of the nanoparticles above their phase separation temperature induces the formation of agglomerates, with a hydrodynamic radius of 1 µm. In serum, noticeably stronger agglomeration occurs at lower temperatures compared to serum-free conditions. Cryogenic transmission electron microscopy (cryo-TEM) revealed a high packing density of agglomerates when serum was not present. In contrast, in the presence of serum, agglomerated nanoparticles were loosely packed, indicating that proteins are intercalated between them. Moreover, an increase in protein content is observed upon heating, confirming that protein adsorption is induced by the alteration of the surface during phase separation. After cooling and switching the surface back, most of the agglomerates were dissolved and the main fraction returned to the original size of approximately 30 nm as shown by asymmetrical flow-field flow fractionation (AF-FFF) and DLS. Furthermore, the amounts of adsorbed proteins are similar before and after heating the nanoparticles to above their phase-separation temperature. Overall, our results demonstrate that the thermoresponsivity of the polymer coating enables turning the corona formation on nanoparticles on and off in situ. As the local heating of body areas can be easily done in vivo, the thermoresponsive coating could potentially be used to induce the agglomeration of nanoparticles and proteins and the accumulation of nanoparticles in a targeted body region.
PY - 2015
DO - https://doi.org/10.1021/acs.langmuir.5b00537
SN - 0743-7463
SN - 1520-5827
VL - 31
IS - 32
SP - 8873
EP - 8881
PB - American Chemical Society
CY - Washington, DC
AN - OPUS4-34163
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Leiterer, Jork
A1 - Panne, Ulrich
A1 - Thünemann, Andreas
A1 - Weidner, Steffen
T1 - Container-less polymerization in acoustically levitated droplets: an analytical study by GPC and MALDI-TOF mass spectrometry
N2 - Molecular masses and end groups of polystyrene (PS) formed in a novel container-less polymerization strategy, based on levitated droplets in an acoustic trap, were determined by Gel Permeation Chromatography (GPC) and Matrix-assisted Laser Desorption/Ionization Time of Flight Mass spectrometry (MALDI-TOF MS).
KW - Ultraschallfalle
KW - MALDI Massenspektrometrie
KW - Polymerisation
PY - 2011
DO - https://doi.org/10.1039/c0ay00390e
SN - 1759-9660
SN - 1759-9679
VL - 3
IS - 1
SP - 70
EP - 73
PB - RSC Publ.
CY - Cambridge
AN - OPUS4-23655
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, Hans R.
A1 - Weidner, Steffen
A1 - Scheliga, Felix
T1 - Cyclic poly(l-lactide) via ring-expansion polymerization by means of dibutyltin 4-tert-butylcatecholate
N2 - Five new catalysts are prepared from dibutyltin oxide and catechol (HCa),
2,3-dihydroxynaphthalene (NaCa), 4-tert-butyl catechol (BuCa), 4-cyano
catechol (CyCa), and 4-benzoyl catechol (BzCa), but only BuCa gives useful
results. When benzyl alcohol is used as an initiator, linear chains having
benzyl ester end groups are formed in a slow polymerization process. In
contrast to cyclic or noncyclic dibutyltin bisalkoxides, neat BuCa yields
cyclic poly(l-lactide)s via a fast ring-expansion polymerization. Under certain
conditions, a high-melting crystalline phase (Tm = 191 °C) is obtained.
At 160 °C and short reaction times even-numbered cycles are slightly
prevailing, but, surprisingly, at 120 °C, odd-numbered cycles are predominantly
formed. These results definitely prove that a ring-expansion mechanism
is operating.
KW - Lactides
KW - MALDI TOF MS
KW - Morphology
KW - Ring-opening polymerization
KW - Tin catalysts
PY - 2017
DO - https://doi.org/10.1002/macp.201700274
SN - 1521-3935
SN - 1022-1352
VL - 218
IS - 22
SP - 1700274, 1
EP - 1700274, 10
PB - Wiley VCH
CY - Weinheim
AN - OPUS4-43583
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Weidner, Steffen
T1 - Cyclic polylactides via ring-expansion polymerization
N2 - We will report on a new kind of ring-expansion polymerization (REP) of cyclic esters based of three classes of catalysts.
In contrast to REP described previously these new polymerizations are characterized by a self-extrusion of the catalysts resulting in cyclic homopolyesters as the only reaction product. These REP of L-lactide were performed in bulk at temperatures between 100 and 180°C without racemization. A simplified scheme of a REP catalyzed by BuCa or SnBi is presented below. With meso-lactide temperatures down to 60°C were realized. Depending on catalyst, time and temperature with equal quantities of even and odd-numbered cycles a strong predominance of either even or odd-numbered cycles was found.
T2 - 255th ACS National Meeting
CY - New Orleans, LA, USA
DA - 18.03.2018
KW - MALDI-TOF MS
KW - Poly(lactide)
KW - Polymerisation
KW - Catalysts
PY - 2018
AN - OPUS4-44833
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Weidner, Steffen
A1 - Scheliga, F.
A1 - Kricheldorf, H.R.
T1 - Low-temperature polymerization of epsilon-caprolactone catalyzed by cerium triflates
N2 - Using 22 metal triflates as catalysts, ε-caprolactone is polymerized at 22 °C in bulk. Only five relatively acidic triflates prove active. Three triflates, including the neutral Sm3+, are active using water as initiator. A very low content of cyclics is found in all the experiments. With Ce3+ and Ce4+, polymerizations are performed in CH2Cl2 and in bulk at 2 °C and 22 °C. Low dispersities (down to 1.1) are obtained. At 22 °C, Ce4+ and, even better, Ce3+ also catalyze syntheses of CO2H- and CH2OH-terminated polycaprolactones, whereby higher dispersities and larger fractions of cyclics are obtained. Further polymerizations and polycondensations are catalyzed with protic acids. The results can be explained by a proton-catalyzed activated monomer mechanism.
KW - Epsilon-caprolactone
KW - Cyclization
KW - Metal triflates
KW - Polycondensation
KW - Ring-opening polymerization
PY - 2013
DO - https://doi.org/10.1002/macp.201300279
SN - 1022-1352
SN - 1521-3935
VL - 214
IS - 18
SP - 2043
EP - 2053
PB - Wiley-VCH Verl.
CY - Weinheim
AN - OPUS4-29219
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Weidner, Steffen
A1 - Schultze, R.-D.
A1 - Enthaler, B.
T1 - Matrix-assisted laser desorption/ionization imaging mass spectrometry of pollen grains and their mixtures
N2 - RATIONALE
The fast and univocal identification of different species in mixtures of pollen grains is still a challenge. Apart from microscopic evaluation and Raman spectroscopy, no other techniques are available.
METHODS
Matrix-assisted laser desorption/ionization (MALDI) imaging mass spectrometry was applied to the analysis of extracts of single pollen grains and pollen mixtures. Pollen grains were fixed, treated and covered with matrix directly on the MALDI target.
RESULTS
Clearly resolved MALDI ion intensity images could be obtained enabling the identification of single pollen grains in a mixture.
CONCLUSIONS
Our results demonstrate the potential and the suitability of MALDI imaging mass spectrometry as an additional method for the identification of pollen mixtures.
KW - MALDI
KW - Imaging
KW - Pollen
KW - Blends
PY - 2013
DO - https://doi.org/10.1002/rcm.6523
SN - 0951-4198
SN - 1097-0231
VL - 27
IS - 8
SP - 896
EP - 903
PB - Wiley
CY - Chichester
AN - OPUS4-27986
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Weidner, Steffen
A1 - Holländer, A.
A1 - Kühn, Gerhard
T1 - Matrix-assisted Laser Desorption/Ionization Mass Spectrometry of C36- Alkane degradated by Vacuum Ultraviolet Radiation
PY - 1997
SN - 0951-4198
SN - 1097-0231
VL - 11
SP - 447
EP - 450
PB - Wiley
CY - Chichester
AN - OPUS4-11095
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Gabriel, Stefan
A1 - Steinhoff, R.F.
A1 - Pabst, M.
A1 - Schwarzinger, C.
A1 - Zenobi, R.
A1 - Panne, Ulrich
A1 - Weidner, Steffen
T1 - Improved analysis of ultra-high molecular mass polystyrenes in matrix-assisted laser desorption/ionization time-of-flight mass spectrometry using DCTB matrix and caesium salts
N2 - Rationale
The ionization of polystyrenes in matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) is typically achieved by the use of silver salts. Since silver salts can cause severe problems, such as cluster formation, fragmentation of polymer chains and end group cleavage, their substitution by alkali salts is highly desirable.
Methods
The influence of various cations (Ag+, Cs+ and Rb+) on the MALDI process of polystyrene (PS) mixtures and high mass polystyrenes was examined. The sample preparation was kept as straightforward as possible. Consequently, no recrystallization or other cleaning procedures were applied.
Results
The investigation of a polystyrene mixture showed that higher molecular polystyrenes could be more easily ionized using caesium, rather than rubidium or silver salts. In combination with the use of DCTB as matrix a high-mass polymer analysis could be achieved, which was demonstrated by the detection of a 1.1 MDa PS.
Conclusions
A fast, simple and robust MALDI sample preparation method for the analysis of ultra-high molecular weight polystyrenes based on the use of DCTB and caesium salts has been presented. The suitability of the presented method has been validated by using different mass spectrometers and detectors.
KW - MALDI
KW - Mega-dalton
KW - Ionization
KW - Caesium
KW - Polystyrene
KW - DCTB
PY - 2015
UR - http://onlinelibrary.wiley.com/doi/10.1002/rcm.7197/full
DO - https://doi.org/10.1002/rcm.7197
SN - 0951-4198
SN - 1097-0231
VL - 29
IS - 11
SP - 1039
EP - 1046
PB - Wiley
CY - Chichester
AN - OPUS4-33191
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Trimpin, Sarah
A1 - Yenchick, Frank S.
A1 - Lee, Chuping
A1 - Hoang, Khoa
A1 - Pophristic, Milan
A1 - Karki, Santosh
A1 - Marshall, Darrell D.
A1 - Lu, I-Chung
A1 - Lutomski, Corinne A.
A1 - El-Baba, Tarick J.
A1 - Wang, Beixi
A1 - Pagnotti, Vincent S.
A1 - Meher, Anil K.
A1 - Chakrabarty, Shubhashis
A1 - Imperial, Lorelei F.
A1 - Madarshahian, Sara
A1 - Richards, Alicia L.
A1 - Lietz, Christopher B.
A1 - Moreno-Pedraza, Abigail
A1 - Leach, Samantha M.
A1 - Gibson, Stephen C.
A1 - Elia, Efstathios A.
A1 - Thawoos, Shameemah M.
A1 - Woodall, Daniel W.
A1 - Jarois, Dean R.
A1 - Davis, Eric T.J.
A1 - Liao, Guochao
A1 - Muthunayake, Nisansala S.
A1 - Redding, McKenna J.
A1 - Reynolds, Christian A.
A1 - Anthony, Thilani M.
A1 - Vithanarachchi, Sashiprabha M.
A1 - DeMent, Paul
A1 - Adewale, Adeleye O.
A1 - Yan, Lu
A1 - Wager-Miller, James
A1 - Ahn, Young-Hoon
A1 - Sanderson, Thomas H.
A1 - Przyklenk, Karin
A1 - Greenberg, Miriam L.
A1 - Suits, Arthur G.
A1 - Allen, Matthew J.
A1 - Narayan, Srinivas B.
A1 - Caruso, Joseph A.
A1 - Stemmer, Paul M.
A1 - Nguyen, Hien M.
A1 - Weidner, Steffen
A1 - Rackers, Kevin J.
A1 - Djuric, Ana
A1 - Shulaev, Vladimir
A1 - Hendrickson, Tamara L.
A1 - Chow, Christine S.
A1 - Pflum, Mary Kay H.
A1 - Grayson, Scott M.
A1 - Lobodin, Vladislav V.
A1 - Guo, Zhongwu
A1 - Ni, Chi-Kung
A1 - Walker, J. Michael
A1 - Mackie, Ken
A1 - Inutan, Ellen D.
A1 - McEwen, Charles N.
T1 - New Processes for Ionizing Nonvolatile Compounds in Mass Spectrometry: The Road of Discovery to Current State-of-the-Art
N2 - This Perspective covers discovery and mechanistic aspects aswell as initial applications of novel ionization processes for use in massspectrometry that guided us in a series of subsequent discoveries, instrumentdevelopments, and commercialization. Vacuum matrix-assisted ionization onan intermediate pressure matrix-assisted laser desorption/ionization sourcewithout the use of a laser, high voltages, or any other added energy wassimply unbelievable, at first. Individually and as a whole, the variousdiscoveries and inventions started to paint, inter alia, an exciting new pictureand outlook in mass spectrometry from which key developments grew thatwere at the time unimaginable, and continue to surprise us in its simplisticpreeminence. We, and others, have demonstrated exceptional analyticalutility. Our current research is focused on how best to understand, improve, and use these novel ionization processes throughdedicated platforms and source developments. These ionization processes convert volatile and nonvolatile compounds from solid orliquid matrixes into gas-phase ions for analysis by mass spectrometry using, e.g., mass-selected fragmentation and ion mobilityspectrometry to provide accurate, and sometimes improved, mass and drift time resolution. The combination of research anddiscoveries demonstrated multiple advantages of the new ionization processes and established the basis of the successes that lead tothe Biemann Medal and this Perspective. How the new ionization processes relate to traditional ionization is also presented, as wellas how these technologies can be utilized in tandem through instrument modification and implementation to increase coverage ofcomplex materials through complementary strengths.
KW - Mass spectrometry
PY - 2024
DO - https://doi.org/10.1021/jasms.3c00122
SN - 1879-1123
VL - 35
IS - 12
SP - 2753
EP - 2784
PB - American Chemical Society (ACS)
AN - OPUS4-61417
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Weidner, Steffen
A1 - Kricheldorf, H. R.
T1 - The Role of Transesterification in SnOct 2 - Catalyzed Polymerizations of Lactides
N2 - l-lactide or meso-lactide are polymerized either at 120 °C where the polymerization process of l-lactide is accompanied by crystallization, or at 180 °C where poly(l-lactide) remains in the molten state. Polymerizations at 120 °C initially yield even-numbered chains (with respect to lactic acid units) having relatively low dispersity, but the fraction of odd-numbered chains increases with time and the entire molecular weight distribution changes. Traces of cyclics are only formed after 7 d. Polymerizations at 180 °C yield equilibrium of even and odd-numbered chains from the beginning, but at low monomer/initiator ratios and short reaction times (<4 h) cyclics are again not formed. They appear at longer reaction times and entail higher dispersities. The results are discussed in terms of five different transesterification mechanisms.
KW - Polylactides
KW - MALDI
KW - Transesterification
KW - Sn catalysts
PY - 2017
DO - https://doi.org/10.1002/macp.201600331
SN - 1022-1352
VL - 218
IS - 3
SP - 1600331
PB - Wiley
AN - OPUS4-39753
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Rösler, Alexander
A1 - Weidner, Steffen
A1 - Klamroth, Tillmann
A1 - Müller, Axel H. E.
A1 - Schlaad, Helmut
T1 - Kinetics of anionic polymerization of β‐myrcene in hydrocarbon solvents
N2 - The kinetics of anionic polymerization of β‐myrcene initiated by sec‐butyllithium were examined in saturated and unsaturated hydrocarbon solvents, i.e. cyclohexane, cyclohexene, 4‐vinylcyclohexene and dl‐limonene. Polymerizations usually proceeded in a living manner, i.e. in the absence of termination and chain transfer reactions, in all solvents, to produce well‐defined polymyrcenes with high content (85%) of cis‐1,4 units. However, polymyrcenyllithium chains exhibited limited long‐term stability in 4‐vinylcyclohexene solution, most probably due to chain transfer to solvent. Reaction orders with respect to the concentration of active chains were found to be one‐quarter in cyclohexane increasing to one‐half in unsaturated solvents, indicating that the polymyrcenyllithium chains are present as tetrameric or dimeric associates, respectively. Apparent activation energies were found to be 81 kJ mol−1 in cyclohexane and 77 kJ mol−1 in dl‐limonene solution, which are close to the values obtained by quantum chemical calculations.
KW - MALDI-TOF MS
KW - Anionic polymerization
KW - β‐myrcene
KW - Kinetics
KW - Reaction order
KW - Activation energy
KW - Microstructure
KW - Quantum chemical calculations
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-630900
DO - https://doi.org/10.1002/pi.6772
SN - 1097-0126
SP - 1
EP - 8
PB - Wiley
CY - New York, NY
AN - OPUS4-63090
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, Hans R.
A1 - Weidner, Steffen
T1 - Zwitterionic polymerization of glycolide catalyzed by pyridine
N2 - The usefulness of various N- and P-based catalysts for syntheses of cyclic polyglycolide via zwitterionic polymerization of glycolide was examined. Most catalysts produced discolored, largely insoluble polyglycolides consisting of cycles and unidentified byproducts. Soluble, cyclic polyglycolides were obtained using neat pyridine as catalyst at 120 °C, 100 °C, 80 °C, and even at 60 °C. The number-average molecular weights were extremely low and depended slightly on the glycolide-to-pyridine ratio. Three different mass distributions of the cycles were detected by mass spectrometry, depending on the reaction conditions. The cyclic polyglycolides were also characterized by differential scanning calorimetry (DSC) and small-angle X-ray scattering (SAXS) measurements. The SAXS data in combination with the mass spectra indicate that the majority of the cycles form extended-ring crystallites
KW - MALDI-TOF MS
KW - Polylactide
KW - Polymerization
KW - Zitterions
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-639748
DO - https://doi.org/10.1039/d5py00762c
SN - 1759-9954
SP - 1
EP - 9
PB - Royal Society of Chemistry (RSC)
AN - OPUS4-63974
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, Hans R.
A1 - Weidner, Steffen
A1 - Meyer, Andreas
T1 - Poly(butylene terephthalate): About condensation, cyclization, degradation and elimination reactions in the solid state, and the role of smooth crystal surfaces
N2 - Three commercial poly(butylene terephthalate) (PBT) samples - Pocan B1300 (B13), Pocan B1600 (B16), and Addigy P 1210 (AP121) - served as the starting materials for the annealing experiments, which were conducted with and without the addition of esterification and transesterification catalysts. The catalysts used were Sn(II) 2-ethylhexanoate (SnOct₂), Zr(IV) acetylacetonate, and 4-toluene sulfonic acid (TSA). Temperatures varied between 150 and 210 °C. The PBT samples were characterized using differential scanning calorimetry (DSC), gel permeation chromatography (GPC), small-angle X-ray scattering (SAXS), and matrix-assisted laser desorption/ionization time-of-flight (MALDI TOF) mass spectrometry. The MALDI mass spectra of all three samples differed greatly but displayed mass peaks of cycles. Similar results were produced by annealing with SnOct₂ or Zr(acac)₄, which favored the formation of even-numbered cycles within the mass range below m/z 5000, along with slow degradation. TSA favored a more intensive degradation without the formation of cycles or even with the destruction of cycles. PBT chains with two carboxylic (COOH) end groups were the most stable species under all circumstances. The origin of the extremely high melting point of AP121 (241–242 °C) can be explained by the smoothing of crystallite surfaces via transesterification. The results suggest that combining MALDI mass spectrometry and SAXS measurements provides a new way to better understand the solid-state chemistry of PBT and related polyesters.
KW - MALDI-TOF MS
KW - Polybutylene Terephthalate
KW - Crystallization
KW - solid state
KW - cyclization
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-652844
DO - https://doi.org/10.1016/j.polymdegradstab.2025.111862
SN - 0141-3910
VL - 245
SP - 1
EP - 11
PB - Elsevier Ltd.
AN - OPUS4-65284
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Dalgic, Mete‐Sungur
A1 - Kumar, Sourabh
A1 - Weidner, Steffen
T1 - Quantitative Analysis of Polymers by MALDI‐TOF Mass Spectrometry: Correlation Between Signal Intensity and Arm Number
N2 - The signal intensities of linear and star‐shaped poly(L‐lactides) (PLA) and poly (ethylene oxides) (PEO) were compared to determine the influence of the number of arms on the ionization in matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectrometry. In this study, a variety of blends were prepared and investigated, including binary and ternary combinations of linear and star‐shaped polymers with similar molecular masses. The focus was on examining their intensity ratios. In equimolar binary PLA blends, polymer stars were observed to exhibit higher intensities than their linear counterparts. This result was supported by experiments with equimolar ternary PLA blends, which clearly demonstrated an intensity dependence on the number of polymer arms. It was observed that four‐arm PLA exhibited higher intensities than three‐arm PLA. A similar trend was observed in investigations involving acetylated polymer end groups, suggesting that differences in ionization are primarily influenced by polymer architecture rather than end groups. In order to validate this assumption, the binding energies for [polymer‐K] + adduct ions utilizing the most stable geometry obtained from GOAT (Global Optimizer Algorithm) were calculated, revealing that star‐shaped lower mass oligomers have slightly higher binding energies.
KW - MALDI-TOF MS
KW - Starlike polymers
KW - Quantification
KW - Topology
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653401
DO - https://doi.org/10.1002/jms.70023
SN - 1076-5174
VL - 61
IS - 1
SP - 1
EP - 12
PB - John Wiley & Sons Ltd.
AN - OPUS4-65340
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Rösler, Alexander
A1 - Weidner, Steffen
A1 - Klamroth, Tillmann
A1 - Müller, Axel HE
A1 - Schlaad, Helmut
T1 - Kinetics of anionic polymerization of β‐myrcene in hydrocarbon solvents
N2 - AbstractThe kinetics of anionic polymerization of β‐myrcene initiated by sec‐butyllithium were examined in saturated and unsaturated hydrocarbon solvents, i.e. cyclohexane, cyclohexene, 4‐vinylcyclohexene and dl‐limonene. Polymerizations usually proceeded in a living manner, i.e. in the absence of termination and chain transfer reactions, in all solvents, to produce well‐defined polymyrcenes with high content (85%) of cis‐1,4 units. However, polymyrcenyllithium chains exhibited limited long‐term stability in 4‐vinylcyclohexene solution, most probably due to chain transfer to solvent. Reaction orders with respect to the concentration of active chains were found to be one‐quarter in cyclohexane increasing to one‐half in unsaturated solvents, indicating that the polymyrcenyllithium chains are present as tetrameric or dimeric associates, respectively. Apparent activation energies were found to be 81 kJ mol−1 in cyclohexane and 77 kJ mol−1 in dl‐limonene solution, which are close to the values obtained by quantum chemical calculations. © 2025 The Author(s). Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
KW - Myrcene
KW - Anionic polymerization
KW - MALDI TOF MS
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-649039
DO - https://doi.org/10.1002/pi.6772
SN - 0959-8103
SP - 1
EP - 8
PB - Wiley
AN - OPUS4-64903
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Trimpin, S.
A1 - Lee, C.
A1 - Weidner, Steffen
A1 - El-Baba, T.
A1 - Lutomski, C.
A1 - Inutan, E.
A1 - Foley, C.
A1 - Ni, C.-K.
A1 - McEwen, C.
T1 - Unprecedented Ionization Processes in Mass SpectrometryProvide Missing Link between ESI and MALDI
N2 - In the field of mass spectrometry,producing intact, highly-charged protein ions from surfaces is a conundrum with significant potential payoff in application areas ranging from bio-medical to clinical research. Here, we report on the ability to form intact, highly-charged protein ions on high vacuum time-of-flight mass spectrometers in the linear and reflectron modes achievable using experimental conditions that allow effective matrix removal from both the sample surfaces and from the charged clusters formed by the laser Ablation event. The charge states are the highest reported on high vacuum mass spectrometers, yet they remain at only around athird of the highest charge obtained using laser ablation with a suitable matrix at atmospheric pressure. Other than physical instrument modifications, the key to forming abundant and stable highly-charged ions appears to be the volatility of the matrix used. Cumulative results suggest mechanistic links between the ionization process reported here and traditional ionization methods of electrospray ionization and matrix-assisted laser desorp-tion/ionization.
KW - MALDI
KW - Electrospray
KW - Mass spectrometry
KW - Ionization
PY - 2018
DO - https://doi.org/10.1002/cphc.201701246
SN - 1439-4235
SN - 1439-7641
VL - 19
IS - 5
SP - 581
EP - 589
PB - Wiley-VCH
AN - OPUS4-44404
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, H.
A1 - Weidner, Steffen
A1 - Scheliga, F.
T1 - Cyclic poly(lactide)s via the ROPPOC method catalyzed by alkyl- or aryltin chlorides
N2 - A comparison of tributyltin chloride, dibutyltin dichloride,and butyltin trichloride as catalysts of ring-opening polymerizations(ROPs) of l-lactides at 160°C in bulk reveals increasing reactivity in the above order, but only the least reactive catalysts, Bu3SnCl, yield a uniform reaction product, namely cyclic poly(L-lactide)s with weight average molecular weights (Mw ́s) in the range of 40,000–80,000. A comparison of dimethyltin , dibutyltin , and diphenyltin dichlorides resulted in the following order of reactivity: Me2SnCl2 189 °C was monitored by means of DSC measurements and characterized in selected cases by SAXS measurements. It was confirmed that the formation of HTm crystallites involves a significant growth of the thickness of the lamellar crystallites along with smoothing of their surface. Annealing at 170 °C for 1 d or longer causes thermal degradation with lowering of the molecular weights, a gradual transition of cyclic into linear chains and a moderate decrease of lamellar thickness. An unexpected result revealed by MALDI TOF mass spectrometry is a partial reorganization of the molecular weight distribution driven by a gain of crystallization enthalpy.
KW - Polylactide
KW - MALDI-TOF MS
KW - Crystallization
KW - Annealing
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-521062
DO - https://doi.org/10.1039/d0ra10012a
VL - 11
IS - 5
SP - 2872
EP - 2883
PB - Royal Society of Chemistry
AN - OPUS4-52106
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, H. R.
A1 - Weidner, Steffen
A1 - Meyer, A.
T1 - High Tm linear poly(L-lactide)s prepared via alcohol-initiated ROPs of L-lactide
N2 - Alcohol-initiated ROPs of L-lactide were performed in bulk at 160 °C for 72 h with variation of the catalyst or with variation of the initiator (aliphatic alcohols). Spontaneous crystallization was only observed when cyclic Sn(II) compounds were used as a catalyst. Regardless of initiator, high melting crystallites with melting temperatures (Tm) of 189–193 °C were obtained in almost all experiments with Sn(II) 2,2′-dioxybiphenyl (SnBiph) as catalyst, even when the time was shortened to 24 h. These HTm poly(lactide)s represent the thermodynamically most stable form of poly(L-lactide). Regardless of the reaction conditions, such high melting crystallites were never obtained when Sn(II) 2-ethylhexanoate (SnOct2) was used as catalyst. SAXS measurements evidenced that formation of HTm poly(L-lactide) involves growth of the crystallite thickness, but chemical modification of the crystallite surface (smoothing) seems to be of greater importance. A hypothesis, why the “surface smoothing” is more effective for crystallites of linear chains than for crystallites composed of cycles is discussed.
KW - Polylactide
KW - MALDI-TOF MS
KW - Ring-opening polymerization
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-524330
DO - https://doi.org/10.1039/d1ra01990b
VL - 11
IS - 23
SP - 14093
EP - 14102
PB - Royal Society of Chemistry
AN - OPUS4-52433
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, H. R.
A1 - Meyer, A.
A1 - Weidner, Steffen
T1 - High Tm Poly(l-lactide)s by Means of Bismuth Catalysts?
N2 - One series of BiSub-catalyzed ring-opening polymerizations (ROPs) is per-formed at 160 °C for 3 days with addition of difunctional cocatalysts to find out, if poly(l-lactide) crystallizes directly from the reaction mixture. An analogous series is performed with monofunctional cocatalysts. High Tm crystal-lites (Tm > 190 °C) are obtained from all bifunctional cocatalysts, but not from all monofunctional ones. It is shown by means of SAXS measurements that the high Tm values are mainly a consequence of a transesterification–homogenization process across the lamellar surfaces resulting in thickness and smoothing of the surfaces. An unusual enthalpy-driven modification of the molecular weight distribution is found for samples that have crystallized during the polymerization. A third series of ROPs is performed at 170 °C for 2 h followed by annealing at 120 °C (2 h) to induce crystallization. Complete transformation of the resulting low Tm crystallites (Tm < 180 °C) into the high Tm crystallites by annealing at 170 °C for 1 d is not achieved, despite variation of the cocatalyst.
KW - Polylactide
KW - MALDI-TOF MS
KW - Crystallization
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-522777
DO - https://doi.org/10.1002/macp.202100019
SN - 1022-1352
VL - 222
IS - 8
SP - 19
PB - Wiley
AN - OPUS4-52277
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, H. R.
A1 - Weidner, Steffen
T1 - ROP of L-lactide and ε-caprolactone catalyzed by tin(ii) andtin(iv) acetates–switching from COOH terminated linear chains to cycles
N2 - The catalytic potential of tin(II)acetate, tin(IV)acetate, dibutyltin-bis-acetate and dioctyl tin-bis-acetate was compared based on polymerizations of L-lactide conducted in bulk at 160 or 130°C. With SnAc2 low-Lac/Cat ratios (15/1–50/1) were studied and linear chains having one acetate and one carboxyl end group almost free of cyclics were obtained. Higher monomer/catalyst ratios and lower temperatures favored formation of cycles that reached weight average molecular weights (Mw's) between 100,000 and 2,500,000. SnAc4 yielded mixtures of cycles and linear species under all reaction conditions. Dibutyltin- and dioctyl tin bis-acetate yielded cyclic polylactides under most reaction conditions with Mw's in the range of 20,000–80,000. Ring-opening polymerizations performed with ε-caprolactone showed similar trends, but the formation of COOH-terminated linear chains was significantly more favored compared to analogous experiments with lactide. The reactivity of the acetate catalysts decreased in the following order: SnAc2> SnAc4>Bu2SnAc2~Oct2SnAc2
KW - Polylactide
KW - MALDI-TOF MS
KW - Catalyst
KW - Ring-opening polymerization
KW - Tin acetates
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-521923
DO - https://doi.org/10.1002/pol.20200866
VL - 59
IS - 5
SP - 439
EP - 450
PB - Wiley Online Library
AN - OPUS4-52192
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, H. R.
A1 - Scheliga, F.
A1 - Weidner, Steffen
T1 - What does conversion mean in polymer science?
N2 - The definition of the term “conversion” is discussed for a variety of polymer syntheses. It is demonstrated that in contrast to organic and inorganic chemistry several different definitions are needed in polymer science. The influence of increasing conversion on structure and topology of homo- and Copolymers is illustrated. Chain-growth polymerizations, such as radical polymerization or living anionic polymerizations of vinyl monomers, condensative chain polymerization, two and three-dimensional step-growth polymerizations, ring–ring or chain–chain equilibration and chemical modification of polymers are considered.
KW - Polymers
KW - Polymerization
KW - Conversion
KW - Polycondensation
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-523597
DO - https://doi.org/10.1002/macp.202100010
VL - 222
IS - 8
SP - 10
PB - Wiley VCH
AN - OPUS4-52359
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Weidner, Steffen
A1 - Kricheldorf, H. R.
T1 - SnOct2-catalyzed ROPs of L-lactide initiated by acidic OH- compounds: Switching from ROP to polycondensation and cyclization
N2 - Ring-opening polymerizations (ROPs) of L-lactide are performed in bulk at 130°C with tin(II) 2-ethylhexanoate as catalyst and various phenols of differentacidity as initiators. Crystalline polylactides having phenyl ester end groups are isolated, which are almost free of cyclics. The dispersities and molecular weights are higher than those obtained from alcohol-initiated ROPs under identical conditions. Polymerizations at 160°C yield higher molecular weights than expected from the monomer/initiator ratio and a considerable fraction of cycles. The fraction of cycles increases with higher reactivity of the ester end group indicating that the cycles are formed by end-to-end cyclization.
KW - Polylactide
KW - MALDI-TOF MS
KW - Polymerization
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-540250
DO - https://doi.org/10.1002/pol.20210823
SN - 2642-4150
VL - 60
IS - 5
SP - 785
EP - 793
PB - Wiley
AN - OPUS4-54025
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, H. R.
A1 - Weidner, Steffen
T1 - Synthesis of polylactides by means of tin catalysts
N2 - This article reviews the usefulness of tin(II) and tin(IV) salts and compounds as catalysts for the polymerization of lactides. The text is subdivided into nine parts mainly reflecting different polymerization strategies, such as ring-opening polymerization (ROP), ring-expansion polymerization (REP), ROP combined with simultaneous polycondensation (ROPPOC), various catalysts with unknown polymerization mechanisms, and polycondensation of lactic acid. Since the toxicity of tin salts and compounds is a matter of concern and frequently mentioned in numerous publications, the first section deals with facts instead of myths about the toxicity of tin salts and compounds.
KW - Polylactide
KW - MALDI-TOF MS
KW - Tin catalysts
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-545050
DO - https://doi.org/10.1039/d2py00092j
SP - 1
EP - 30
PB - Royal Society for Chemistry
AN - OPUS4-54505
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, H. R.
A1 - Weidner, Steffen
A1 - Scheliga, F.
T1 - SnOct2-catalyzed and alcohol-initiated ROPS of L-lactide - Control of the molecular weight and the role of cyclization
N2 - Ring-opening polymerizations (ROP) of l-lactide (LA) are conducted in bulk at 130, 160, or 180 °C and are initiated with two different alcohols at 160 °C. The lactide/initiator ratio (LA/In) is varied from 50/1 (20/1 at 180 °C) to 900/1 and the lactide/catalyst ratio (LA/Cat) between 2000/1 and 8000/1. At all temperatures a nearly perfect control of number average molecular weight (Mn) via the LA/In ratio is feasible up to LA/In = 200/1, but at higher ratios the Mn value lags behind the theoretical values and the discrepancy increases with higher LA/Cat ratios. Variation of the LA/Cat ratio influences the formation of cycles but does not significantly influence Mn, when the LA/In ratio is kept constant. The formation of cycles is favored by lower In/Cat ratios and is the main reason for the unsatisfactory control of Mn at high LA/In ratios. The results also suggest that the cycles are mainly or exclusively formed by end-to-end cyclization and not, as believed previously, by back-biting.
KW - Polylactide
KW - MALDI-TOF MS
KW - Cyclization
KW - Ring-opening polymerization
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-543066
DO - https://doi.org/10.1002/macp.202100464
SN - 1521-3935
SP - 1
EP - 10
PB - Wiley-VCH
CY - Weinheim
AN - OPUS4-54306
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, H. R.
A1 - Weidner, Steffen
A1 - Scheliga, F.
T1 - Ring-Expansion Polymerization of 𝝐-Caprolactone, Glycolide, and l-lactide with a Spirocyclic Tin(IV) Catalyst Derived from or 2,2′-Dihydroxy-1,1′-Binaphthyl – New Results and a Revision
N2 - In contrast to other cyclic tin bisphenoxides, polymerizations of glycolide and l-lactide with the spirocyclic tin(IV) bis-1,1′-bisnapthoxide yield linear chains having a 1,1′-bisnapthol end group and no cycles. In the case of l-lactide, LA/Cat ratio and temperature are varied and at 160 °C or below, all polylactides mainly consist of even-numbered chains. A total predominance of even-numbered chains is also found for homopolymerization of glycolide, or the copolymerization of glycolide and l-lactide, when conducted <120 °C.
Linear chains having a bisnaphthol end group are again the main reaction products of ring-expansion polymerizations (REP) of 𝝐-caprolactone, but above 150 °C cycles are also formed.
KW - Polylactide
KW - MALDI-TOF MS
KW - Polymerization
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-541931
DO - https://doi.org/10.1002/macp.202100308
VL - 222
IS - 24
SP - 1
EP - 10
PB - Wiley VCH GmbH
AN - OPUS4-54193
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, Hans R.
A1 - Weidner, Steffen
T1 - Ring-ring equilibration (RRE) of cyclic poly(L-lactide)s by means of cyclic tin catalysts
N2 - With 2,2-dibutyl-2-stanna-1,3-dithiolane (DSTL) and 2-stanna-1,3-dioxa-4,5,6,7-dibenzoxepane (SnBiPh) as catalysts ring-expansion polymerizations (REP) were performed either in 2 M solution using three different solvents and two different temperatures or in bulk at 140 and 120 ◦C. A kinetically controlled rapid REP up to weight average molecular masses (Mẃs) above 300 000 was followed by a slower degradation of the molecular masses at 140 ◦C, but not at 120 ◦C Furthermore, a low molecular mass cyclic poly(L-lactide) (cPLA) with a Mn around 16 000 was prepared by polymerization in dilute solution and used as starting material for ring-ring equilibration at 140 ◦C in 2 M solutions. Again, a decrease of the molecular mass was detectable, suggesting that the equilibrium Mn is below 5 000. The degradation of the molecular masses via RRE was surprisingly more effective in solid cyclic PLA than in solution, and a specific transesterification mechanism involving loops on the surface of crystallites is proposed. This degradation favored the formation of extended-ring crystallites, which were detectable by a “saw-tooth pattern” in their MALDI mass spectra.
KW - Organic Chemistry
KW - Polymers and Plastics
KW - MALDI-TOF MS
KW - Materials Chemistry
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-593819
DO - https://doi.org/10.1016/j.eurpolymj.2024.112765
SN - 0014-3057
VL - 206
SP - 1
EP - 8
PB - Elsevier B.V.
AN - OPUS4-59381
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Cappella, Brunero
A1 - Sturm, Heinz
A1 - Weidner, Steffen
T1 - Breaking polymer chains by dynamic plowing lithography
N2 - The adhesion of poly(methyl methacrylate) (PMMA) and polystyrene (PS) films, whose surface has been previously structured by dynamic plowing lithography (DPL), has been measured by means of forcedisplacement curves. The different adhesion of modified and unmodified PS leads to the assumption that polymer chains are broken during DPL. After measuring the energy dissipated by the tip during DPL, in order to check that the transferred energy is sufficient to break covalent bonds, the polymer chain scission caused by the lithographic process has been definitely confirmed by size exclusion chromatography measurements of the lithographed films.
KW - AFM
KW - Nanolithography
KW - Chain scission
PY - 2002
DO - https://doi.org/10.1016/S0032-3861(02)00285-9
SN - 0032-3861
SN - 1873-2291
VL - 43
IS - 16
SP - 4461
EP - 4466
PB - Springer
CY - Berlin
AN - OPUS4-1608
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, H. R.
A1 - Weidner, Steffen
T1 - Dispersities of Polyesters of Various Diphenols Prepared by Irreversible Polycondensations
N2 - Polyesters of bisphenol-A, bisphenol-P, catechol, and sebacic acid are prepared and different synthetic methods are compared. The diphenols are condensed with sebacoyl chloride either in dichloromethane/pyridine or in refl uxing chlorobenzene without HCl-acceptor. Further- more, bisphenol-A acetate is polycondensed with sebacic acid in bulk. All experiments are worked up so that fractionation is avoided. The extent of cyclization is estimated by matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS) and the molar mass distribution by size exclusion chromatography (SEC). Polycondensations in solution yield larger fractions of cyclics and higher dispersities (up to 11). Polycondensations in bulk give lower fractions of cycles and dispersities from 4.6 to 6.3 for high molar mass polyesters or 2.8 to 3.5 for low molar mass products. Characteristic curves describing the dependence of the dispersity on the initial monomer concentration are elaborated.
KW - cyclization
KW - dispersity
KW - mass spectra
KW - polycondensation
KW - polyesters
PY - 2016
DO - https://doi.org/10.1002/macp.201600004
IS - 217
SP - 1361
EP - 1369
PB - Wiley-VCH Verlag
CY - Weinheim
AN - OPUS4-37120
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Zeegers, G. P.
A1 - Steinhoff, R. F.
A1 - Weidner, Steffen
A1 - Zenobi, R.
T1 - Evidence for laser-induced redox reactions in matrix-assisted laserdesorption/ionization between cationizing agents and target plate material: a study with polystyrene and trifluoroacetate salts
N2 - Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) is often applied to assess the dispersity and the end groups of synthetic polymers through the addition of cationizing agents. Here weaddress how these cation adducts are formed using polystyrene (PS) as a model polymer. We analyzed PSby MALDI-MS with a 2-[(2E)-3-(4-tert-butylphenyl)-2-methylprop-2-enylidene]malononitrile (DCTB) as the matrix and a range of trifluoroacetate (TFA) salts as cationizing agents on a range of different targetplate materials (copper, 1.4301 stainless steel, aluminum, Inconel 625, Ti90/Al6/V4 and chromium-, gold-and silver-plated stainless steel). It was found that on a stainless steel substrate the metal cations Al+,Li+, Na+, Cu+and Ag+formed polystyrene adducts, whereas K+, Cs+, Ba2+, Cr3+, Pd2+, In3+, or their lower oxidation states, did not. For the copper and silver substrates, PS and DCTB adduct formation with cations liberated from these target plate materials was observed upon addition of a cationizing agent, which indicates the occurrence of redox reactions between the added TFA salts and the target plate material. Judging from their standard electrode potentials, these redox reactions would not normally occur, i.e.,they require an additional energy input, strongly suggesting that the observed redox reactions are laser-induced. Furthermore, copper granules were found to successfully sequester PS from a tetrahydrofuran(THF) solution, consistent with the view complex formation with the copper target plate can take place prior to the MALDI-MS measurement.
KW - Polymer MALDI
KW - Cationization
KW - Polystyrene
KW - Laser-induced redox reactions
KW - Target plate material
PY - 2017
DO - https://doi.org/10.1016/j.ijms.2016.10.007
SN - 1387-3806
SN - 1873-2798
VL - 416
SP - 80
EP - 89
PB - Elsevier B.V.
AN - OPUS4-41146
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, H. R.
A1 - Weidner, Steffen
A1 - Scheliga, F.
T1 - Cyclic poly(L-lactide)s via ring-expansion polymerizations catalysed by 2,2-dibutyl-2- stanna-1,3-dithiolane
N2 - L-Lactides were polymerized in bulk at 120 or 160 °C with cyclic dibutyltin catalysts derived from 1,2-dimercaptoethane or 2-mercaptoethanol. Only linear chains having one benzyl ester and one OH-end group were obtained when benzyl alcohol was added. When L-lactides were polymerized with neat dibutyl-2-stanna-1,3-dithiolane, exclusively cyclic polylactides were formed even at 120 °C. The temperature, time and monomer/catalyst ratio (M/C) were varied. These results are best explained by a combination of ring-expansion polymerization and ring-extrusion of cyclic oligo- or polylactides with Elimination of the cyclic catalyst. Neither syntheses of linear polylactides nor of cyclic lactides involved racemization up to 20 h at 160 °C.
KW - Ring-expansion polymerization
KW - MALDI
KW - Polylactides
PY - 2017
DO - https://doi.org/10.1039/C6PY02166B
SN - 1759-9954
SN - 1759-9962
VL - 8
IS - 9
SP - 1589
EP - 1596
PB - Royal Society of Chemistry
AN - OPUS4-39748
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Chabbah, T.
A1 - Chatti, S.
A1 - Jaffrezic-Renault, N.
A1 - Weidner, Steffen
A1 - Marestin, C.
A1 - Mercier, R.
T1 - Impedimetric sensors based on diethylphosphonate-containingpoly(arylene ether nitrile)s films for the detection of lead ions
N2 - This article describes the elaboration and characterization of diethylphosphonate-containing polymers coated electrodes as sensors for the detection of heavy metalstraces, by electrochemical impedance spectroscopy. Diethylphosphonate groupswere chosen as heavy metals binding sites. Two different series of polymers bearingthese anchoring groups were synthesized. Whereas the diethylphosphonate groupsare directly incorporated in the aromatic macromolecular chain in some polymers, analiphatic spacer is removing the chelating site from the polymer backbone in others.The influence of the macromolecular structure on the sensing response was studied,especially for the detection of Pb2+,Ni2+,Cd2+and Hg2+. Polymer P6, including thehigher amount of diethylphosphonate groups removed from the polymer chain by ashort alkyl spacer gave the higher sensitivity of detection of lead ions, with a detec-tion limit of 50 pM
KW - Heavy metals
KW - Phosphonate esters
KW - Lead ions
KW - MALDI TOF MS
PY - 2023
DO - https://doi.org/10.1002/pat.6065
SN - 1042-7147
SP - 1
EP - 11
PB - John Wiley & Sons, Ltd
AN - OPUS4-57356
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Seifert, Stephan
A1 - Weidner, Steffen
A1 - Panne, Ulrich
A1 - Kneipp, Janina
T1 - Taxonomic relationship of pollen from MALDI TOF MS data using multivariate statistics
N2 - Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) has been suggested as a promising tool for the investigation of pollen, but the usefulness of this approach for classification and identification of pollen species has to be proven by an application to samples of varying taxonomic relations.
KW - MALDI mass spectrometry
KW - Pollen
KW - Multivariate statistics
PY - 2015
DO - https://doi.org/10.1002/rcm.7207
SN - 0951-4198
SN - 1097-0231
VL - 29
SP - 1145
EP - 1154
PB - Wiley
CY - Chichester
AN - OPUS4-35296
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Thünemann, Andreas
A1 - Knappe, Patrick
A1 - Bienert, Ralf
A1 - Weidner, Steffen
T1 - Online coupling of field-flow fractionation with SAXS and DLS for polymer analysis
N2 - We report on a hyphenated polymer analysis method consisting of asymmetrical flow field-flow fractionation (A4F) coupled online with small-angle X-ray scattering (SAXS) and dynamic light scattering (DLS). A mixture of six poly(styrene sulfonate)s with molar masses in the range of 6.5 × 103 to 1.0 × 106 g mol-1 was used as a model system for polyelectrolytes in aqueous solutions with a broad molar mass distribution. A complete polymer separation and analysis was performed in 60 min. Detailed information for all polymer fractions are available on i) the radii of gyration, which were determined from the SAXS data interpretation in terms of the Debye model (Gaussian chains), and ii) the diffusion coefficients (from DLS). We recommend using the A4F-SAXS-DLS coupling as a possible new reference method for the detailed analysis of complex polymer mixtures. Advantages of the use of SAXS are seen in comparison to static light scattering for polymers with radii of gyration smaller then 15 nm, for which only SAXS produces precise analytical results on the size of the polymers in solution.
PY - 2009
DO - https://doi.org/10.1039/b9ay00107g
SN - 1759-9660
SN - 1759-9679
VL - 1
SP - 177
EP - 182
PB - RSC Publ.
CY - Cambridge
AN - OPUS4-20567
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Weidner, Steffen
A1 - Meyer, A.
A1 - Kricheldorf, H. R.
T1 - Alcohol-initiated and Tin(II) 2-ethylhexanoate-catalyzed polymerization of L-lactide in bulk – About separate crystallization of cyclic and linear Poly (L-lactide)s
N2 - Alcohol-initiated ROPs of L-Lactide were performed at 140 ◦C in bulk with variation of the initiator/catalyst ratio and time. Lower ratios favor the formation of cycles which upon annealing display a change of the MALDI mass peak distribution towards a new maximum with a “saw-tooth pattern” of the mass peaks representing the cycles.
Such a pattern was not observed for the mass peak of the linear chains. The coexistence of these patterns indicate that linear and cyclic poly (L-lactide)s (PLA) crystallize in separate crystals, and that the crystallites of the cycles are made up by extended rings. High Tm and ΔHm values confirm that these extended-ring crystallites represent a thermodynamically optimized form of PLA. Experiments with preformed cyclic and linear PLAs support this interpretation.
KW - Polylactide
KW - MALDI-TOF MS
KW - Crystalinity
KW - Polymerization
PY - 2023
DO - https://doi.org/10.1016/j.polymer.2023.126355
VL - 285
IS - 126355
SP - 1
EP - 9
PB - Elsevier Ltd.
AN - OPUS4-58355
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, H.R.
A1 - Yashiro, T.
A1 - Weidner, Steffen
T1 - Isomerization-free polycondensations of maleic anhydride with alpha,omega-alkanediols
KW - Polymerisation
KW - Polykondensation
KW - MALDI Massenspektrometrie
PY - 2009
DO - https://doi.org/10.1021/ma9009356
SN - 0024-9297
SN - 1520-5835
VL - 42
IS - 17
SP - 6433
EP - 6439
PB - American Chemical Society
CY - Washington, DC
AN - OPUS4-20930
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, H.R.
A1 - Weidner, Steffen
T1 - High Tg copolyesters of lactide, isosorbide and isophthalic acid
N2 - Using SnCl2, ZnCl2, Zn-lactate or Zr-acetylacetonate as catalysts ʟ-lactide was oligomerized in bulk with isosorbide as initiator. The ratio isosorbide/lactide was varied from 8/2 to 2/8. The resulting oligomers were in situ polycondensed with isophthaloyl chloride in various aromatic solvents. In chlorobenzene homogeneous reaction mixtures were obtained, whereas molten copolyesters precipitated from toluene and xylene. The obtained average molecular weights indicated high polydispersities. According to MALDI-TOF MS the low molar mass reaction products (<4 kDa) almost exclusively consisted of cyclics with a composition depending on the feed ratio. The glass-transition temperatures (Tg) varied between the values of poly(ʟ-lactide (64 °C) and poly(isosorbide isophthalate) (180 °C). Four polyesters prepared from 5-tert-butyl isophthalic acid displayed higher Tg values. Differential thermoanalysis evidenced that the thermostability decreases with higher fractions of lactide, but processing from the melt seems to be feasible up to temperatures of 260 °C without risking degradation.
KW - Lactide
KW - Isosorbide
KW - Ring-opening polymerization
KW - Polycondensation
KW - Cyclization
PY - 2013
DO - https://doi.org/10.1016/j.eurpolymj.2013.05.007
SN - 0014-3057
SN - 1873-1945
VL - 49
IS - 8
SP - 2293
EP - 2302
PB - Elsevier
CY - Oxford
AN - OPUS4-29014
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Falkenhagen, Jana
A1 - Dalgic, Mete-Sungur
A1 - Weidner, Steffen
T1 - Quantitative MALDI-TOF Mass Spectrometry of Star-Shaped Polylactides Based on Chromatographic Hyphenation
N2 - The end groups of three- and four-arm star-shaped polylactides (PLA) with trimethylolpropane and pentaerythritol core structures were functionalized with acetic acid. Reaction products with different degrees of functionalization were analyzed by matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry. Additional gradient elution liquid adsorption chromatography (GELAC) measurements were performed to determine the degree of functionalization. This technique enabled clear separation and sufficient quantification of the formed species. These chromatographic data could be used inversely to quantify mass spectrometric results, which are usually biased by the unknown ionization probabilities of different polymer end group structures. Our results showed that, in this particular case, the peak intensity in the MALDITOF mass spectra can be used to semiquantitatively determine the degree of functionalization in incompletely functionalized multiarm PLA.
KW - Polylactides
KW - MALDI-TOF-MS
KW - Gradient elution liquid adsorption chromatography
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-625292
DO - https://doi.org/10.1021/jasms.4c00491
SN - 1879-1123
SP - 1
EP - 9
PB - American Chemical Society (ACS)
AN - OPUS4-62529
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Weidner, Steffen
A1 - Meyer, Andreas
A1 - Falkenhagen, Jana
A1 - Kricheldorf, Hans R.
T1 - Cyclic polyglycolide by means of metal acetylacetonates
N2 - Glycolide was polymerized in bulk at 160 °C using various metal acetylacetonates as catalysts. Zirconium acetylacetonate was particularly efficient, enabling rapid polymerization even at 130 °C. The formation of cyclic poly(glycolic acid) (PGA), most likely via a ring-expansion polymerization (REP) mechanism, was proven by matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry. Depending on the polymerization conditions, the formation of even-numbered cycles was favored to varying degrees. Number-average molecular weights (Mn) in the range of 2000–3500 g mol−1 were achieved with dispersities below 2.0. Wide-angle X-ray scattering (WAXS) powder patterns showed that the crystal lattice was the same as that of known linear PGAs, regardless of the Mn values. These patterns enabled a comparison of crystallinities with values derived from DSC measurements.
KW - MALDI-TOF MS
KW - Polyglycolide
KW - Crystallization
KW - Small-angle X-ray scattering
KW - Cyclization
PY - 2026
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-653731
DO - https://doi.org/10.1039/d5ra07961f
SN - 2046-2069
VL - 16
IS - 2
SP - 1757
EP - 1764
PB - Royal Society of Chemistry (RSC)
AN - OPUS4-65373
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, H. R.
A1 - Weidner, Steffen
A1 - Falkenhagen, Jana
T1 - The role of transesterifications in reversible polycondensations and a reinvestigation of the Jacobson-Beckmann-Stockmayer experiments
N2 - The polycondensations of adipic acid and 1,10-decanediol catalyzed by toluene sulfonic acid (TSA) were reinvestigated using MALDI TOF mass spectrometry and NMR spectroscopy. Unexpected reactions of TSA were detected along with incomplete conversion of the monomers. Furthermore, transesterification reactions of end-capped poly(1,10-decanediol adipate) and end-capped poly(ε-caprolactone) catalyzed by TSA were studied. Despite the quite different (ionic) reaction mechanisms, it was found that for polycondensations performed in bulk intermolecular transesterification is more efficient than the intramolecular “back-biting”; this scenario was not considered in the Jacobson–Stockmayer theory of reversible polycondensations.
These results also confirm that the Jacobson–Stockmayer explanation of reversible polycondensations solely on the basis of ring chain equilibration is not only devoid of any experimental evidence, but also in contradiction to the results elaborated in this work.
KW - Polylactide
KW - MALDI-TOF MS
KW - Polycondensation
PY - 2022
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-543402
DO - https://doi.org/10.1039/d1py01679b
SN - 1759-9962
SP - 1
EP - 9
PB - RSC Publ.
CY - Cambridge
AN - OPUS4-54340
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Weidner, Steffen
A1 - Falkenhagen, Jana
A1 - Krüger, Ralph-Peter
A1 - Just, Ulrich
T1 - Principle of Two-Dimensional Characterization of Copolymers
N2 - Two-dimensional polymer characterization is used for a simultaneous analysis of molar masses and chemical heterogeneities (e.g., end groups, copolymer composition, etc.). This principle is based on coupling of two different chromatographic modes. Liquid adsorption chromatography at critical conditions (LACCC) is applied for a separation according to the chemical heterogeneity, whereas in the second-dimension fractions are analyzed with regard to their molar mass distribution by means of size exclusion chromatography (SEC). Because appropriate standards for a calibration of the SEC are seldom available, matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry (MALDI-TOF MS) was used to substitute the SEC. The LACCC-MALDI MS coupling enables acquiring additional structural information on copolymer composition, which can considerably enhance the performance of this coupled method.
KW - MALDI-TOF MS
KW - Chromatographie
KW - Kopplung
PY - 2007
DO - https://doi.org/10.1021/ac062145f
SN - 0003-2700
SN - 1520-6882
VL - 79
IS - 13
SP - 4814
EP - 4819
PB - American Chemical Society
CY - Washington, DC
AN - OPUS4-17722
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, H. R.
A1 - Weidner, Steffen
A1 - Falkenhagen, Jana
T1 - Reversible Polycondensations outside the Jacobson-Stockmayer Theory and a New Concept of Reversible Polycondensations
N2 - L-Lactide was polymerized with tin(II)acetate, tin(II)2-ethyl hexanoate, diphenyltin dichloride and dibutyltin bis(pentafluorophenoxide) at 130 °C in bulk. When an alcohol was added as initiator, linear chains free of cycles were formed having a degree of polymerization (DP) according to the lactide/initiator (LA/In) ratio.
Analogous polymerizations in the absence of an initiator yielded high molar mass cyclic polylactides.
Quite similar results were obtained when ε-caprolactone was polymerized with or without initiator.
Several transesterification experiments were conducted at 130 °C, either with polylactide or poly(ε-caprolactone) indicating that several transesterification mechanisms are operating under conditions that do not include formation of cycles by back-biting. Furthermore, reversible polycondensations (revPOCs) with low or moderate conversions were found that did not involve any kind of cyclization. Therefore, These results demonstrate the existence of revPOCs, which do neither obey the theory of irreversible polycondensation as defined by Flory nor the hypothesis of revPOCs as defined by Jacobson and Stockmayer. A new concept encompassing any kind of revPOCs is formulated in the form of a “polycondensation triangle”.
KW - Polylactide
KW - MALDI-TOF MS
KW - Polycondensation
PY - 2021
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-530831
DO - https://doi.org/10.1039/d1py00704a
VL - 12
IS - 35
SP - 5003
EP - 5016
PB - Royal Society for Chemistry
AN - OPUS4-53083
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Weidner, Steffen
A1 - Meyer, A.
A1 - Falkenhagen, Jana
A1 - Kricheldorf, H. R.
T1 - Polycondensations and Cyclization of Poly(L-lactide) Ethyl Esters in the Solid State
N2 - The usefulness of seven different Tin catalysts, Bismuth subsalicylate and Titan tetra(ethoxide) for the polycondensation of ethyl L-lactate (ELA) was examined at 150 °C/6 d. Dibutyltin bis(phenoxides) proved to be particularly effective. Despite the low reactivity of ELA, weight average molecular masses (Mw) up to 12 500 were found along with partial crystallization. Furthermore, polylactides (PLAs) of similar molecular masses were prepared via ELA-initiated ROPs of L-lactide by means of the four most effective polycondensation catalysts. The crystalline linear PLAs were annealed at 140 or 160 °C in the presence of these catalysts. The consequences of the transesterification reactions in the solid PLAs were studied by means of matrix-assisted laser desorption/ionization (MALDI TOF) mass spectrometry, gel permeation chromatography (GPC) and small-angle X-ray scattering (SAXS). The results indicate that polycondensation and formation of cycles proceed in the solid state via formation of loops on the surface of the crystallites. In summary, five different transesterification reactions are required to explain all results.
KW - Polylactide
KW - MALDI-TOF MS
KW - Crystalinity
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-592934
DO - https://doi.org/10.1039/d3py01232h
SN - 1759-9962
VL - 15
IS - 2
SP - 71
EP - 82
PB - RSC Publ.
CY - Cambridge
AN - OPUS4-59293
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -