TY - CONF
A1 - Weidner, Steffen
T1 - MALDI-ToF mass spectrometry for the characterization of biobased polymers suitable for depollution
N2 - In this work, bio-based polymers were synthesized and designed as polymers phases for adsorption of a variety of pollutants from aqueous solutions. The obtained adsorption results showed that the integration of bio-sourced synthons generate attractive hydrophilicity, and wettability of the resulting adsorbent phase. Such polymers phases enable stronger interactions with the organic and inorganic pollutants in water.
A wide variety of different bio-based polymers structures (e. g. poly(ethersulfones, poly(etherphosphines or poly(etherpyridines) with different functional groups were successfully designed in order to adapt chemical structure to different pollutants type and matrice nature.
In order to characterize and to determine the correlation between polymer structures and nature of interaction with pollutants, different analytical technics (NMR, GPC, ATG, DSC, Mass spectrometry) were successfully used. Amongst them, MALDI TOF mass spectrometry plays a superior role since this technique enables the simultaneous determination of the polymer structure, polymer end groups and molecular weight.
This work focusses on the characterization of synthesized polymers. The chemical structure of the repeating unit, the nature of the end groups, as well as the molecular weight, which are all important for the specific interactions of the polymer with the pollutants were clearly determined and suggestions to improve these interactions by changing the synthetic pathway could be given.
T2 - 12. Journees maghreb-europe. Matériaux et Applications aux Dispositifs et Capteurs
CY - Monastir, Tunisia
DA - 08.11.2022
KW - MALDI TOF MS
KW - Biobased polymers
KW - Depollution
PY - 2022
AN - OPUS4-56237
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - CONF
A1 - Weidner, Steffen
T1 - MALDI TOF MS zur Aufklärung von Kristallisationsprozessen in Polyestern
N2 - MALDI TOF Massenspektrometrie wurde verwendet, um Kristallisationsprozesse in Polyestern (Polylactide, Polyglycolide) zu untersuchen. Dabei konnte gezeigt werden, dass Zyklen und Linearen simultan, aber in unterschiedlichen Kristalliten, kristallisieren. Die dabei ablaufenden Umesterungen (Transesterifizierungen) konnten mit der MALDI TOF Massenspektrometrie nachgewiesen werden. Damit wurde ein völlig neues Anwendungsgebiet dieser MS Methode demonstriert.
T2 - 28. Kolloquium Massenspektrometrie von Polymeren
CY - Berlin, Germany
DA - 14.05.2024
KW - MALDI TOF MS
KW - Bioabbaubare Polymere
KW - Crystallinity
PY - 2024
AN - OPUS4-60029
LA - deu
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Rösler, Alexander
A1 - Weidner, Steffen
A1 - Klamroth, Tillmann
A1 - Müller, Axel HE
A1 - Schlaad, Helmut
T1 - Kinetics of anionic polymerization of β‐myrcene in hydrocarbon solvents
N2 - AbstractThe kinetics of anionic polymerization of β‐myrcene initiated by sec‐butyllithium were examined in saturated and unsaturated hydrocarbon solvents, i.e. cyclohexane, cyclohexene, 4‐vinylcyclohexene and dl‐limonene. Polymerizations usually proceeded in a living manner, i.e. in the absence of termination and chain transfer reactions, in all solvents, to produce well‐defined polymyrcenes with high content (85%) of cis‐1,4 units. However, polymyrcenyllithium chains exhibited limited long‐term stability in 4‐vinylcyclohexene solution, most probably due to chain transfer to solvent. Reaction orders with respect to the concentration of active chains were found to be one‐quarter in cyclohexane increasing to one‐half in unsaturated solvents, indicating that the polymyrcenyllithium chains are present as tetrameric or dimeric associates, respectively. Apparent activation energies were found to be 81 kJ mol−1 in cyclohexane and 77 kJ mol−1 in dl‐limonene solution, which are close to the values obtained by quantum chemical calculations. © 2025 The Author(s). Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
KW - Myrcene
KW - Anionic polymerization
KW - MALDI TOF MS
PY - 2025
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-649039
DO - https://doi.org/10.1002/pi.6772
SN - 0959-8103
SP - 1
EP - 8
PB - Wiley
AN - OPUS4-64903
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, Hans R.
A1 - Weidner, Steffen
A1 - Scheliga, Felix
T1 - Cyclic poly(l-lactide) via ring-expansion polymerization by means of dibutyltin 4-tert-butylcatecholate
N2 - Five new catalysts are prepared from dibutyltin oxide and catechol (HCa),
2,3-dihydroxynaphthalene (NaCa), 4-tert-butyl catechol (BuCa), 4-cyano
catechol (CyCa), and 4-benzoyl catechol (BzCa), but only BuCa gives useful
results. When benzyl alcohol is used as an initiator, linear chains having
benzyl ester end groups are formed in a slow polymerization process. In
contrast to cyclic or noncyclic dibutyltin bisalkoxides, neat BuCa yields
cyclic poly(l-lactide)s via a fast ring-expansion polymerization. Under certain
conditions, a high-melting crystalline phase (Tm = 191 °C) is obtained.
At 160 °C and short reaction times even-numbered cycles are slightly
prevailing, but, surprisingly, at 120 °C, odd-numbered cycles are predominantly
formed. These results definitely prove that a ring-expansion mechanism
is operating.
KW - Lactides
KW - MALDI TOF MS
KW - Morphology
KW - Ring-opening polymerization
KW - Tin catalysts
PY - 2017
DO - https://doi.org/10.1002/macp.201700274
SN - 1521-3935
SN - 1022-1352
VL - 218
IS - 22
SP - 1700274, 1
EP - 1700274, 10
PB - Wiley VCH
CY - Weinheim
AN - OPUS4-43583
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Kricheldorf, H.
A1 - Weidner, Steffen
A1 - Scheliga, F.
T1 - Cyclic poly(lactide)s via the ROPPOC method catalyzed by alkyl- or aryltin chlorides
N2 - A comparison of tributyltin chloride, dibutyltin dichloride,and butyltin trichloride as catalysts of ring-opening polymerizations(ROPs) of l-lactides at 160°C in bulk reveals increasing reactivity in the above order, but only the least reactive catalysts, Bu3SnCl, yield a uniform reaction product, namely cyclic poly(L-lactide)s with weight average molecular weights (Mw ́s) in the range of 40,000–80,000. A comparison of dimethyltin , dibutyltin , and diphenyltin dichlorides resulted in the following order of reactivity: Me2SnCl280%). Polymerization at 120 °C confirmed the trend towards more linear chains with lower temperatures but yielded extended-ring crystals showing a “saw-tooth pattern” in the mass spectra. Oct2SnO gave similar results as Bu2SnO. Bu2SnS proved a sluggish polymerization catalyst, but a good transesterification catalyst in solid PLA.
KW - MALDI TOF MS
KW - Biobased polymers
KW - Polylactide
KW - Ring-expansion polymerization
PY - 2023
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-584121
DO - https://doi.org/10.1002/pol.20230515
SN - 2642-4169
SP - 1
EP - 10
PB - Wiley
CY - Hoboken, NJ
AN - OPUS4-58412
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Dalgic, Mete-Sungur
A1 - Weidner, Steffen
T1 - Solvent-free sample preparation for matrix-assisted laserdesorption/ionization time-of-flight mass spectrometry ofpolymer blends
N2 - Solvent-free sample preparation offers some advantages over solvent-based techniques, such as improved accuracy, reproducibility and sensitivity, for matrix-assisted laser desorption/ionization (MALDI) analysis. However, little or no information is available on the application of solvent-free techniques for the MALDI analysis of polymer blends. Solvent-free sample preparation by ball milling was applied with varying sample-to-matrix ratios for MALDI time-of-flight mass spectrometry analysis of various polymers, including polystyrenes, poly(methyl methacrylate)s and poly(ethylene glycol)s. The peak intensity ratios were compared with those obtained after using the conventional dried droplet sample preparation method. In addition, solvent-assisted milling was also applied to improve sample homogeneities.
Depending on the sample preparation method used, different peak intensity ratios were found, showing varying degrees of suppression of the signal intensities of higher mass polymers. Ball milling for up to 30 min was required to achieve constant intensity ratios indicating homogeneous mixtures. The use of wet-assisted grinding to improve the homogeneity of the blends was found to be disadvantageous as it caused partial degradation and mass-dependent segregation of the polymers in the vials.The results clearly show that solvent-free sample preparation must be carefully considered when applied to synthetic polymer blends, as it may cause additional problems with regard to homogeneity and stability of the blends.
KW - MALDI TOF MS
KW - Sample preparation
KW - Polymer blends
KW - Solvent-free
PY - 2024
UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-598570
DO - https://doi.org/10.1002/rcm.9756
SN - 0951-4198
VL - 38
IS - 12
SP - 1
EP - 9
PB - Wiley online library
AN - OPUS4-59857
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Chabbah, T.
A1 - Chatti, S.
A1 - Zouaoui, F.
A1 - Jlalia, A.
A1 - Gaiji, H.
A1 - Abderrazak, H.
A1 - Casablanca, H.
A1 - Mercier, R.
A1 - Weidner, Steffen
A1 - Errachid, A.
A1 - Marestin, C.
A1 - Jaffrezic-Renault, N.
T1 - New poly(ether-phosphoramide)s sulfides based on green resources as sensitive films for the specific impedimetric detection of nickel ions
N2 - For the development of selective and sensitive chemical sensors, we have developed a new family of poly(etherphosphoramide) polymers. These polymers were obtained with satisfactory yields by nucleophilic aromatic polycondensation using isosorbide as green resources, and bisphenol A with two novel difluoro phosphinothioic amide monomers. Unprecedented, the thiophosphorylated aminoheterocycles monomers, functionalized with two heterocyclic amine, N-methylpiperazine and morpholine were successfully obtained by nucleophilic substitution reaction of P(S)–Cl compound. The resulting polymers were characterized by different analytical techniques (NMR, MALDI–ToF MS, GPC, DSC, and ATG). The resulting partially green polymers, having tertiary phosphine sulfide with P–N side chain functionalities along the main chain of polymers are the sensitive film at the surface of a gold electrode for the impedimetric detection of Cd, Ni, Pb and Hg. The bio-based poly(etherphosphoramide) functionalized with N-methylpiperazine modified sensor showed better analytical performance
than petrochemical based polymers for the detection of Ni2+. A detection limit of 50 pM was obtained which is very low compared to the previously published electrochemical sensors for nickel detection.
KW - Poly(ether-phosphoramide)s sulfides
KW - Green chemistry
KW - Polymer film
KW - MALDI TOF MS
PY - 2022
DO - https://doi.org/10.1016/j.talanta.2022.123550
VL - 247
IS - 123550
SP - 1
EP - 9
PB - Elsevier B.V.
AN - OPUS4-54980
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -
TY - JOUR
A1 - Chabbah, T.
A1 - Chatti, S.
A1 - Jaffrezic-Renault, N.
A1 - Weidner, Steffen
A1 - Marestin, C.
A1 - Mercier, R.
T1 - Impedimetric sensors based on diethylphosphonate-containingpoly(arylene ether nitrile)s films for the detection of lead ions
N2 - This article describes the elaboration and characterization of diethylphosphonate-containing polymers coated electrodes as sensors for the detection of heavy metalstraces, by electrochemical impedance spectroscopy. Diethylphosphonate groupswere chosen as heavy metals binding sites. Two different series of polymers bearingthese anchoring groups were synthesized. Whereas the diethylphosphonate groupsare directly incorporated in the aromatic macromolecular chain in some polymers, analiphatic spacer is removing the chelating site from the polymer backbone in others.The influence of the macromolecular structure on the sensing response was studied,especially for the detection of Pb2+,Ni2+,Cd2+and Hg2+. Polymer P6, including thehigher amount of diethylphosphonate groups removed from the polymer chain by ashort alkyl spacer gave the higher sensitivity of detection of lead ions, with a detec-tion limit of 50 pM
KW - Heavy metals
KW - Phosphonate esters
KW - Lead ions
KW - MALDI TOF MS
PY - 2023
DO - https://doi.org/10.1002/pat.6065
SN - 1042-7147
SP - 1
EP - 11
PB - John Wiley & Sons, Ltd
AN - OPUS4-57356
LA - eng
AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany
ER -