TY - CONF A1 - Wäsche, Rolf A1 - Hartelt, Manfred A1 - Hodoroaba, Vasile-Dan T1 - A study on wear particle analysis in lubricated steel-steel contacts T2 - International Tribology Congress/ITC 2015 CY - Tokyo, Japan DA - 2015-09-15 PY - 2015 AN - OPUS4-34324 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wäsche, Rolf A1 - Hartelt, Manfred T1 - Ceramics and DLC - influence of tribochemistry on sliding under lubricated conditions at elevated temperatures T2 - Satelite Symposium on Tribochemistry CY - Nikko, Japan DA - 2015-09-13 PY - 2015 AN - OPUS4-34325 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wäsche, Rolf A1 - Hartelt, Manfred A1 - Hodoroaba, Vasile-Dan T1 - Analysing wear particles on the nano scale N2 - A novel method for preparation and chracterisation of nano scale wear particles by means of TSEM was presented. The tribological tests were carried out in a lubricated system at a temperature of 80°C. T2 - The 17th Nordic Symposium on Tribology - NORDTRIB 2016 CY - Hämeenlinna, Finland DA - 14.06.2016 KW - Nano scale KW - Wear particles KW - Tribology KW - Steel KW - SEM PY - 2016 AN - OPUS4-38209 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wäsche, Rolf A1 - Harsha, A. P. T1 - Tribological studies on polyetherimide composites sliding against steel under reciprocating conditions N2 - Results of tribological tests on polyetherimide composites were presented. The tests were carried out at room temperature as well as at 120°C. Counter body was steel 100Cr6. T2 - PolyTrib 2016. 2nd International Conference on Polymer Tribology CY - Ljubljana, Slovenia DA - 15.09.2016 KW - PEI KW - Composites KW - Polyetherimide KW - Temperature KW - Steel PY - 2016 AN - OPUS4-38690 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wäsche, Rolf A1 - Ehrke, Roman A1 - Woydt, Mathias T1 - Wear of alpha-Alumina in hot steam up to 300°C N2 - Selfmated alpha-alumina sliding couples habe been investigated under oscillating sliding at 100 N load in different humidity conditions in air as well as in hot steam up to temperatures of 300°C and ambient pressures up to 4 bar. T2 - 7th International Conference on Mechanics and Materials in Design CY - Albufeira, Portugal DA - 11.06.2017 KW - Alpha-alumina KW - Wear KW - Temperature KW - Abrasion PY - 2017 AN - OPUS4-41127 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wäsche, Rolf A1 - Steinborn, Gabriele A1 - Woydt, Mathias T1 - Colloidal processing of Nbc cermets with Ni binder N2 - Niobium-titanium carbide cermets with nickel binder have been prepared by colloidal processing in water without a milling step by using Poly-diallyl-dimethyl-ammonium chloride (Poly-DADMAC) as a dispersant. Homogeneous microstructures with relative densities larger than 99% of the theoretical density have been achieved by gas pressure sintering in argon atmosphere. However, mechanical properties like hardness and strength were slightly decreased due to precipitation of free carbon. T2 - ISNT2017 & ISSNOX5 - 9th International Symposium on Nitrides & 5th International Symposium on SiAlONS and Non-Oxides CY - Sapporo, Japan DA - 27.08.2017 KW - Niobium carbide KW - Colloidal processing KW - Nckel binder KW - Hardness PY - 2017 AN - OPUS4-42152 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wäsche, Rolf A1 - Woydt, Mathias T1 - Niobium carbide, a new cermet material with excellent properties N2 - Niobium carbide is a ceramic material which can be used with excellent results to replace tungsten carbide with cobalt binder. Furthermore, it might be manufactured by classic ceramic technologies and even colloidal processing. To achieve high toughness and strength, it is necessary to have a perfect mix of hard phase and binder, which is mainly achieved by ball milling. Mechanical and physical properties as well as results on different tribological and application-oriented machining tests are presented. The results have been compared with results obtained with NbC grades with Co and Fe3Al binders as well as with pure binderless hot-pressed NbC and SPS sintered Nb2O5. T2 - ICCCI 2018 - 6th Int. Conf. on the Characterization and Control of Interfaces for High Quality Advanced Materials and 54th Summer Symposium on Powder Technology CY - Kurashiki, Japan DA - 09.07.2018 KW - Niobium carbide KW - Cermet KW - Microstructure KW - Properties PY - 2018 AN - OPUS4-45643 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wäsche, Rolf A1 - Ehrke, Roman A1 - Kramer, Renee A1 - Brandt, Guido T1 - Influence of temperature on tribological behaviour of DLC coatings under lubricated conditions up to 250°C N2 - The lecture deals with both friction and wear processes in ceramic - a-C:H Systems. T2 - AsiaTrib 2018 CY - Kuching, Malaysia DA - 16.09.2018 KW - Temperature KW - Lubricated sliding KW - Tribofilm PY - 2018 AN - OPUS4-46036 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -