TY - JOUR A1 - Wäsche, Rolf A1 - Paulick, Carl A1 - Steinborn, Gabriele A1 - Richter, V. A1 - Werner, M. T1 - Joining of ceramic components in the green state via LPIM JF - Advanced materials research N2 - It has been successfully demonstrated that ceramic materials can be joined in the green state without a second phase by using low pressure injection molded parts. The investigation of the joining interface revealed that a high quality interface can be achieved by carefully adjusting the different manufacturing steps. The use of monomodal particle size distribution in the used powder CT3000SG is inferior to a broader particle size distribution obtained by replacing 33% of the finer alumina powder by coarser CT1200SG. In this way the dewaxing process is significantly improved when the wall thickness of the part exceeds 3 mm. The investigation of the mechanical properties of the joined and sintered parts revealed, that the bending strength of the joined specimens achieved about 80 % of the unjoined, monolithic specimens. T2 - 4th International Conference on Advanced Materials and Processing CY - Hamilton, New Zealand DA - 2006-12-10 KW - Joining KW - Ceramics KW - Green state KW - Interface KW - Bending strength KW - Low pressure injection molding PY - 2005 UR - http://www.scientific.net/3-908453-89-5/207/ SN - 1022-6680 SN - 1662-8985 VL - 29-30 SP - 207 EP - 210 PB - Trans Tech Publ. CY - Zurich AN - OPUS4-19001 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wäsche, Rolf A1 - Klaffke, Dieter A1 - Steinborn, Gabriele ED - Bartz, Wilfried J. T1 - Tribological investigations on infiltrated zirconia T2 - 15th International colloquium tribology - Automotive and industrial lubrication T2 - 15th International colloquium tribology - Automotive and Industrial Lubrication CY - Ostfildern, Germany DA - 2006-01-17 KW - Friction KW - Wear infiltration KW - Zirconia KW - Alcaline earth fluorides PY - 2006 SN - 3-924813-62-0 SP - 1(?) EP - 7(?) CY - Ostfildern AN - OPUS4-12165 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Steinborn, Gabriele A1 - Wäsche, Rolf T1 - Charakterisierung der Dispergiereigenschaften von keramischen nanodispersen Suspensionen mit der Ultraschallspektroskopie JF - Chemie - Ingenieur - Technik N2 - Die Dispergiereigenschaften von verschiedenen nanoskaligen Pulvern mit unterschiedlicher Kornfraktion im Bereich von 10 bis 250 nm werden in verdünnten und konzentrierten keramischen Schlickern mit der Ultraschallspektroskopie untersucht. Alle stabilen Suspensionen weisen im entsprechenden pH-Bereich eine monomodale Partikelgrößenverteilung auf. Durch die Charakterisierung der Suspensionen mit der Ultraschallspektroskopie kann eine verbesserte Bewertung hinsichtlich Homogenität und Agglomeratbildung auch für nanoskalige Pulver erhalten werden. Dies ermöglicht eine bessere Qualitätskontrolle prozessrelevanter Schritte bei der Verarbeitung. KW - Dispergieren KW - Nanopartikel KW - Suspensionen KW - Folie KW - Nanopulver KW - Dispergierung PY - 2007 DO - https://doi.org/10.1002/cite.200600141 SN - 0009-286X SN - 1522-2640 VL - 79 IS - 3 SP - 257 EP - 265 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-16271 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wäsche, Rolf A1 - Steinborn, Gabriele T1 - Wear behaviour of low IR-emission titanate ceramics under gross slip fretting conditions against steel and alpha-alumina JF - Wear N2 - The tribological behavior of different low infrared (IR) emission ceramic materials from the titanate group has been investigated at room temperature under gross slip fretting conditions against 100Cr6 ball bearing steel and α-alumina as the counterface materials. For all material pairs, friction and wear depended largely on the relative humidity of the environment. When paired with steel the low IR-emission ceramic disks showed higher wear resistance. Under dry conditions, almost no wear was found on the low IR-emission ceramic specimen. The high wear on the steel counter body is caused not only by tribo-oxidation, which is the main wear mechanism, but also by abrasion. In dry conditions a COF of 0.6 and in humid conditions a COF of 0.2 have been measured. When paired with α-alumina the results on wear are just opposite to those with steel counterbody and the low IR-emission ceramic materials show much lower wear resistance under all conditions. This is explained by the predominance of abrasion and the relatively large difference in hardness between the low IR-emission ceramic and α-alumina. In high humidity environments the results point to the formation of stable reaction layers causing lower friction and wear. KW - Gross slip fretting KW - Ceramic wear KW - Yttrium titanate KW - Zirconium titanate KW - Low IR-emission ceramics PY - 2014 DO - https://doi.org/10.1016/j.wear.2014.03.006 SN - 0043-1648 VL - 315 IS - 1-2 SP - 11 EP - 16 PB - Elsevier B.V. CY - Amsterdam AN - OPUS4-30504 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wäsche, Rolf A1 - Steinborn, Gabriele A1 - Woydt, Mathias T1 - Colloidal processing of metal bonded niobium carbide T2 - International Conference on Refractory Metals and Hard Materials N2 - Manufacturing of Niobium carbide cermets with nickel binder and different additions of titanium carbide has been realized by colloidal processing in aqueous environment. T2 - 19. Plansee Seminar CY - Reutte, Austria DA - 29.05.2017 KW - NbC KW - TiC KW - Ni KW - Colloidal processing KW - Gas pressure sintering KW - Hardness PY - 2017 SP - HM 135/1 EP - HM 135/11 AN - OPUS4-40596 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -