TY - JOUR A1 - Droste, Bernhard A1 - Völzke, Holger A1 - Wieser, Günter A1 - Qiao, Linan T1 - Safety Margins of Spent Fuel Transport and Storage Casks Considering Aircraft Crash Impacts JF - International journal of radioactive materials transport (RAMTRANS) PY - 2002 SN - 0957-476X VL - 13 IS - 3-4 SP - 313 EP - 316 PB - Nuclear Technology Publ. CY - Ashford, Kent AN - OPUS4-2697 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Eisenacher, Germar A1 - Scheidemann, Robert A1 - Neumann, Martin A1 - Droste, Bernhard A1 - Völzke, Holger T1 - Dynamic crushing characteristics of spruce wood under large deformations JF - Wood science and technology N2 - An extensive series of large deformation crushing tests with spruce wood specimens was conducted. Material orientation, lateral constraint and loading rate were varied. Regarding material orientation, a reduction in the softening effect and the general force level was observed with a higher fiber-load angle. A comparison with characteristics gained by application of Hankinson's formula showed discrepancies in compression strength and the beginning of the hardening effect. Lateral constraint of the specimens caused a multiaxial stress state in the specimens, which was quantified with the applied measuring method. Further, a higher force level compared to specimens without lateral constraint and significant hardening effect at large deformations resulted. Thus, the influence of a multiaxial stress state on the force level could be determined. An increase in the loading rate led to higher force levels at any displacement value and material orientation. KW - Crushing test KW - Dynamic crushing characteristics KW - Spruce wood KW - Lateral constraint KW - Multiaxial stress state KW - Hankinson's formula PY - 2013 DO - https://doi.org/10.1007/s00226-012-0508-5 SN - 0043-7719 SN - 1432-5225 VL - 47 IS - 2 SP - 369 EP - 380 PB - Springer CY - Berlin AN - OPUS4-27743 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Völzke, Holger A1 - Wieser, Günter A1 - Zencker, Uwe A1 - Droste, Bernhard T1 - Mechanical and thermal safety analyses and demonstrations for cubic DCI multipurpose containers JF - International journal of radioactive materials transport (RAMTRANS) PY - 1997 SN - 0957-476X VL - 8 IS - 3-4 SP - 247 EP - 252 PB - Nuclear Technology Publ. CY - Ashford, Kent AN - OPUS4-21664 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Völzke, Holger A1 - Rödel, Roland A1 - Zeisler, Peter A1 - Droste, Bernhard T1 - Considerations of the competent authority concerning the assessment of a brittle fracture safe ductile cast iron (DCI) cask design JF - International journal of radioactive materials transport (RAMTRANS) PY - 1995 SN - 0957-476X VL - 6 IS - 2/3 SP - 121 EP - 126 PB - Nuclear Technology Publ. CY - Ashford, Kent AN - OPUS4-21731 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Droste, Bernhard A1 - Zeisler, Peter A1 - Völzke, Holger A1 - Rödel, Roland T1 - Development and evaluation of containers for radioactive waste disposal JF - International journal of radioactive materials transport (RAMTRANS) PY - 1994 SN - 0957-476X VL - 5 IS - 1 SP - 27 EP - 32 PB - Nuclear Technology Publ. CY - Ashford, Kent AN - OPUS4-21735 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wille, Frank A1 - Wolff, Dietmar A1 - Droste, Bernhard A1 - Völzke, Holger A1 - Baden, M. T1 - German approach and feedback on experience of transportability of SNF packages after interim storage JF - Packaging, transport, storage & security of radioactive materials (RAMTRANS) N2 - In Germany, the concept of dry interim storage of spent fuel in dual purpose metal casks is implemented, currently for periods of up to 40 years. The casks being used have an approved package design in accordance with the international transport regulations. The license for dry storage is granted on the German Atomic Energy Act with respect to the recently revised 'Guidelines for dry interim storage of irradiated fuel assemblies and heat-generating radioactive waste in casks' by the German Waste management Commission. For transport on public routes between or after long term interim storage periods, it has to be ensured that the transport and storage casks fulfil the specifications of the transport approval or other sufficient properties, which satisfy the proofs for the compliance of the safety objectives at that time. In recent years, the validation period of transport approval certificates for manufactured, loaded and stored packages were discussed among authorities and applicants. A case dependent system of 3, 5 and 10 years was established. There are consequences for the safety cases in the Package Design Safety Report, including evaluation of long term behaviour of components and specific operating procedures of the package. The present research and knowledge concerning the long term behaviour of transport and storage cask components have to be consulted as well as experiences from interim cask storage operations. Challenges in the safety assessment are e.g. the behaviour of aged metal and elastomeric gaskets under IAEA test conditions to ensure that the results of drop tests can be transferred to the compliance of the safety objectives at the time of transport after the interim storage period. Assessment methods for the material compatibility, the behaviour of fuel assemblies and the aging behaviour of shielding parts are issues as well. This paper describes the state of the art technology in Germany, explains recent experience on transport preparation after interim storage and points out arising prospective challenges. KW - Radioactive material storage KW - Dry storage KW - Interim storage KW - Cask design KW - Radioactive material transport KW - Regulation KW - Operating procedures KW - Package KW - Safety KW - Storage KW - Transport KW - Lagerung KW - Spent fuel PY - 2014 DO - https://doi.org/10.1179/1746510914Y.0000000064 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 25 IS - 2 SP - 55 EP - 59 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-33834 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wolff, Dietmar A1 - Probst, Ulrich A1 - Völzke, Holger A1 - Droste, Bernhard A1 - Rödel, Roland T1 - Safety aspects of long-term dry interim storage of type-B spent fuel and HLW transport casks JF - Packaging, transport, storage & security of radioactive materials (RAMTRANS) KW - Transport casks KW - Interim storage KW - Leak tightness KW - KOBAF PY - 2004 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 15 IS - 3-4 SP - 207 EP - 213 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-7414 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zencker, Uwe A1 - Müller, Karsten A1 - Droste, Bernhard A1 - Rödel, Roland A1 - Völzke, Holger T1 - The Application of Fracture Mechanics to the Safety Assessment of Transport Casks for Radioactive Materials JF - Packaging, transport, storage & security of radioactive materials (RAMTRANS) N2 - BAM is the responsible authority in Germany for the assessment of the mechanical and thermal design safety of packages for the transport of radioactive materials. The assessment has to cover the proof of brittle fracture safety for package components made of potentially brittle materials. This paper gives a survey of the regulatory and technical requirements for such an assessment according to BAM's new 'Guidelines for the application of ductile cast iron for transport and storage casks for radioactive materials'. Based on these guidelines, higher stresses than before will be permissible, but it is necessary to put more effort into the safety assessment procedure. The fundamentals of such a proof using the methods of fracture mechanics are presented. The recommended procedure takes into account the guidelines of the IAEA's advisory material which are based on the prevention of crack initiation. Examples of BAM's research and safety assessment practices are given. Recommendations for further developments towards package designs with higher acceptable stress levels will conclude the paper. KW - Ductile iron KW - Cask design KW - Safety assessment KW - Fracture mechanics KW - BAM GGR 007 PY - 2004 DO - https://doi.org/10.1179/174650904775295847 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 15 IS - 3-4 SP - 191 EP - 198 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-11553 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wieser, Günter A1 - Qiao, Linan A1 - Völzke, Holger A1 - Wolff, Dietmar A1 - Droste, Bernhard T1 - Safety analysis of casks under extreme impact conditions JF - Packaging, transport, storage & security of radioactive materials (RAMTRANS) KW - Aircraft crash KW - Impact load KW - Simulation KW - Lid-seal system KW - Storage cask KW - Metallic seal KW - Leakage rate PY - 2004 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 15 IS - 2 SP - 141 EP - 147 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-14441 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Völzke, Holger A1 - Rödel, Roland A1 - Droste, Bernhard T1 - A fracture mechanics safety concept to assess the impact behavior of ductile cast iron containers for shipping and storage of radioactive materials JF - Nuclear engineering and design PY - 1994 SN - 0029-5493 SN - 1872-759X VL - 150 SP - 357 EP - 366 PB - North-Holland Publ. Co. CY - Amsterdam AN - OPUS4-21734 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -