TY - JOUR A1 - Beck, Uwe A1 - Reiners, Georg A1 - Urban, Ingrid A1 - Jehn, H.A. A1 - Kopacz, U. A1 - Schack, H. T1 - Decorative hard coatings: new layer systems without allergy risk JF - Surface and coatings technology PY - 1993 SN - 0257-8972 VL - 61 SP - 215 EP - 222 PB - Elsevier Science CY - Lausanne AN - OPUS4-6957 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Beck, Uwe A1 - Reiners, Georg A1 - Urban, Ingrid A1 - Witt, Klaus T1 - Evaluation of optical properties of decorative coatings by spectroscopic ellipsometry JF - Thin solid films PY - 1992 SN - 0040-6090 VL - 220 SP - 234 EP - 240 PB - Elsevier CY - Amsterdam AN - OPUS4-6960 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Beck, Uwe A1 - Urban, Ingrid A1 - Männ, Marion T1 - Dekorative PVD-Schichten - Grundlegende Eigenschaften und Verhalten - Teilvorhaben Analyse - Förderkennzeichen BMFT 13 N 5836 KW - PVD-Verfahren KW - Oberflächeneigenschaften PY - 1994 SP - 1 EP - 118 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25477 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dloczik, L. A1 - Dittrich, T. A1 - Guminskaya, T. A1 - Grigorieva, N. A1 - Lux-Steiner, M. C. A1 - Tomm, Y. A1 - Urban, Ingrid T1 - CuAlO2 prepared from LiAlO2 by ion exchange reaction T2 - HMI annual report 2003 PY - 2004 UR - http://www.helmholtz-berlin.de/media/media/oea/web/pr_webseite/druckschriften/berichte/2003/hmi03_web.pdf#page=100 SP - 98 PB - Hahn-Meitner-Institut CY - Berlin AN - OPUS4-23343 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dörfel, Ilona A1 - Urban, Ingrid T1 - TEM-Untersuchungen der Randzonenschädigung von Aluminiumoxidkeramiken nach Schleifbearbeitung JF - Materialwissenschaft und Werkstofftechnik = Materials science and engineering technology N2 - Es werden elektronenmikroskopische Untersuchungsergebnisse an Al2O3-Keramiken, die verschiedenen Oberflächenbearbeitungsverfahren unterworfen wurden, vorgestellt. Die Untersuchungen dienen dem Ziel der Optimierung der Oberflächenbearbeitung von keramischen Werkstoffen, wobei der Einfluß leistungsfähiger Bearbeitungsverfahren auf die Ausbildung möglichst schädigungsarmer Oberflächenschichten, die keinen negativen Einfluß auf Festigkeitskennwerte aufweisen, betrachtet wird. Die Wirkung verschiedener Schleif- und Polierprozesse auf Oberflächenveränderungen bearbeiteter Werkstücke wird dargestellt. Es wurde sowohl die Mikrostruktur der geschädigten Randzonenschicht als auch die des unbeeinflußten Grundmaterials mit elektronenmikroskopischen Methoden charakterisiert. Die verschiedenen Schädigungsstadien gestatten eine Einschätzung der Stärke des Störungseintrages in das Material durch verschiedene Schleif- und Polierprozesse. KW - Elektronenmikroskop KW - Transmissionselektronenmikr. KW - Schleifen KW - Polieren KW - Aluminiumoxidkeramik KW - Randzonenschädigung KW - Oberflächenbearbeitung PY - 1996 DO - https://doi.org/10.1002/mawe.19960270609 SN - 0933-5137 SN - 1521-4052 VL - 27 IS - 6 SP - 307 EP - 312 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-651 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dörfel, Ilona A1 - Österle, Werner A1 - Urban, Ingrid A1 - Bouzy, E. T1 - Microstructural characterization of binary and ternary hard coating systems for wear protection - Part I: PVD coatings JF - Surface and coatings technology N2 - Different wear-resistant coatings produced by physical vapour deposition (PVD) were characterized with the aid of cross-sectional transmission electron microscopy (XTEM). All coating systems were optimized by the producers and exhibited good properties with respect to their special applications. The microstructure, texture and chemical composition of binary and ternary systems produced by the arc process [TiN, CrN, Cr2N (Ti, Cr)N on steel substrates] and magnetron sputtering process [TiN, CrN on steel substrates, (Ti, Al)N on Si-substrate] were investigated. All coatings had a more or less columnar microstructure, which was interrupted by interlayers in some cases. Whereas arc coatings always did show some kind of substrate modification, the latter was not observed after magnetron sputtering. Electron diffraction normally revealed a mono-phase fcc structure, except at sites very near to the interface. Only for the systems Cr–N and (Ti, Cr)–N were different additional phases observed at low nitrogen partial pressures. KW - Arc bond sputtering KW - Arc deposition KW - Magnetron sputtering KW - TEM KW - XTEM PY - 1999 UR - http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6TVV-3VTRSCY-G&_user=963821&_coverDate=01%2F29%2F1999&_rdoc=14&_fmt=summary&_orig=browse&_srch=doc-info(%23toc%235544%231999%23998889997%2360972%23FLA%23display%23Volume)&_cdi=5544&_sort=d&_docanch DO - https://doi.org/10.1016/S0257-8972(98)00735-X SN - 0257-8972 VL - 111 IS - 2-3 SP - 199 EP - 209 PB - Elsevier Science CY - Lausanne AN - OPUS4-2364 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dörfel, Ilona A1 - Österle, Werner A1 - Urban, Ingrid A1 - Bouzy, E. A1 - Morlok, O. T1 - Microstructural characterization of binary and ternary hard coating sytems for wear protection - Part II: Ti(CN) PACVD coatings JF - Surface and coatings technology KW - Microstructure KW - PACVD KW - Solid lubrication KW - Texture KW - TiC KW - TiN KW - Ti(CN) PY - 1999 SN - 0257-8972 VL - 116-119 SP - 898 EP - 905 PB - Elsevier Science CY - Lausanne AN - OPUS4-2365 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dück, Alexander A1 - Gamer, Nadja A1 - Gesatzke, Wolfgang A1 - Griepentrog, Michael A1 - Österle, Werner A1 - Sahre, Mario A1 - Urban, Ingrid T1 - Ti/TiN multilayer coatings: deposition technique, characterization and mechanical properties JF - Surface and coatings technology N2 - Ti/TiN multilayer coatings with multilayer periods in the range 5–50 nm and a final thickness of 2 µm were deposited on steel substrates by cyclic modulation of nitrogen gas flow into the chamber of a PVD sputtering device. Coating characterization was performed by cross-sectional transmission electron microscopy, glancing-angle X-ray diffraction and instrumental indentation testing. Individual a-titanium and titanium nitride layers were always observed, although for the finer microstructures, the TiN layers were thicker than the Ti layers by a factor three. The plastic hardness of the films increased steadily with decreasing layer spacing, following a Hall–Petch relationship. Finally, a hardness value of 42 GPa was reached, which is similar to that of a thick TiN monolayer, prepared under the same coating conditions. KW - Ti/TiN KW - Multilayer KW - Magnetron sputtering KW - Mechanical properties KW - Cross-sectional transmission electron microscopy (XTEM) PY - 2001 DO - https://doi.org/10.1016/S0257-8972(01)01171-9 SN - 0257-8972 VL - 142-144 SP - 579 EP - 584 PB - Elsevier Science CY - Lausanne AN - OPUS4-7646 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Engelhardt, Monika A1 - Gesatzke, Wolfgang A1 - Österle, Werner A1 - Müller, Urs A1 - Rooch, Heidemarie A1 - Saliwan Neumann, Romeo A1 - Urban, Ingrid T1 - Makro- und Mikrogefüge von Bremsbelägen T2 - Fortschritte in der Metallographie - Vortragstexte der 39. Metallographie-Tagung KW - Bremsbelag KW - Polymermatrix-Verbundstoff KW - Röntgenfluoreszenzanalyse KW - REM KW - FIB KW - TEM PY - 2005 SN - 3-88355-343-3 SN - 0343-3579 N1 - Serientitel: Sonderbände der praktischen Metallographie – Series title: Sonderbände der praktischen Metallographie IS - 37 SP - 105 EP - 110 PB - Werkstoff-Informationsges. CY - Frankfurt AN - OPUS4-10996 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gesatzke, Wolfgang A1 - Österle, Werner A1 - Rooch, Heidemarie A1 - Urban, Ingrid ED - Portella, Pedro Dolabella T1 - Präparation von Mikro-Querschnitten mit dem fokussierten Ionenstrahl (FIB) T2 - Fortschritte in der Metallographie - Vortragstexte der 37. Metallographie-Tagung T2 - 37. Metallographie-Tagung CY - Berlin, Deutschland DA - 2003-09-17 PY - 2004 SN - 3-88355-322-0 SN - 0343-3579 N1 - Serientitel: Sonderbände der praktischen Metallographie – Series title: Sonderbände der praktischen Metallographie IS - 35 SP - 145 EP - 149 PB - Werkstoff-Informationsges. CY - Frankfurt AN - OPUS4-7641 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -