TY - JOUR A1 - Elordui-Zapatarietxe, S. A1 - Fettig, Ina A1 - Philipp, Rosemarie A1 - Gantois, F. A1 - Lalère, B. A1 - Swart, C. A1 - Petrov, P. A1 - Goenaga-Infante, H. A1 - Vanermen, G. A1 - Boom, G. A1 - Emteborg, H. T1 - Novel concepts for preparation of reference materials as whole water samples for priority substances at nanogram-per-liter level using model suspended particulate matter and humic acids JF - Analytical and bioanalytical chemistry N2 - One of the unresolved issues of the European Water Framework Directive is the unavailability of realistic water reference materials for the organic priority pollutants at low nanogram-per-liter concentrations. In the present study, three different types of ready-to-use water test materials were developed for polycyclic aromatic hydrocarbons (PAHs), polybrominated diphenyl ethers (PBDEs) and tributyltin (TBT) at nanogram-per-liter levels. The first type simulated the dissolved phase in the water and comprised of a solution of humic acids (HA) at 5 mg L-1 dissolved organic carbon (DOC) and a spike of the target compounds. The second type of water sample incorporated the particulate phase in water. To this end, model suspended particulate matter (SPM) with a realistic particle size was produced by jet milling soil and sediments containing known amounts of PAHs, PBDEs and TBT and added as slurry to mineral water. The most complex test materials mimicked 'whole water' consequently containing both phases, the model SPM and the HA solution with the target analytes strongly bound to the SPM. In this paper, the development of concepts, processing of the starting materials, characterisation of the HA and model SPMs as well as results for homogeneity and stability testing of the ready-to-use test materials are described in detail. KW - Slurry KW - PBDE KW - PAH KW - TBT KW - Reference materials KW - Suspended particulate matter KW - Whole water KW - Water Framework Directive PY - 2015 DO - https://doi.org/10.1007/s00216-014-8349-8 SN - 1618-2642 SN - 1618-2650 VL - 407 IS - 11 SP - 3055 EP - 3067 PB - Springer CY - Berlin AN - OPUS4-33087 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Elordui-Zapatarietxe, S. A1 - Fettig, Ina A1 - Richter, Janine A1 - Philipp, Rosemarie A1 - Gantois, F. A1 - Lalère, B. A1 - Swart, C. A1 - Emteborg, H. T1 - Interaction of 15 priority substances for water monitoring at ng L-1 levels with glass, aluminium and fluorinated polyethylene bottles for the containment of water reference materials JF - Accreditation and quality assurance N2 - Certified water reference materials are currently not available for most of the hydrophobic organic pollutants listed in the EU Water Framework Directive. To find the most suitable container type for subsequent reference material productions, feasibility studies for the preparation of waters with polycyclic aromatic hydrocarbons (PAHs), polybrominated diphenyl ethers (PBDEs) and tributyltin (TBT) close to environmental quality standards in water have been performed. Due to the hydrophobic nature of these compounds and their tendency to adsorb onto container walls, an adequate selection of the most appropriate material for containment, storage and transport of water reference materials is crucial. Three different materials (aluminium, amber glass and fluorinated polyethylene, FPE) and three volumes (500/600 mL, 1000/1200 mL and 2000/3000 mL, depending on commercial availability) were tested at ng L-1 level of the target compounds. FPE shows by far the highest loss of analytes due to adsorption onto the container walls for all compounds studied. Aluminium and glass are equally suited for PAHs and PBDEs, but aluminium is unsuitable as container material for TBT due to acid cleaning requirements. The volume of the containers had no dramatic effect on the adsorption behaviour of target compounds for the different volumes tested. KW - Water framework directive KW - Reference materials KW - Hydrophobic organic pollutants KW - Bottles KW - Adsorption KW - Glass KW - Aluminium KW - Fluorinated polyethylene PY - 2015 DO - https://doi.org/10.1007/s00769-015-1150-3 SN - 0949-1775 SN - 1432-0517 VL - 20 IS - 6 SP - 447 EP - 455 PB - Springer CY - Berlin AN - OPUS4-34946 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -