TY - CONF A1 - Raupach, M. A1 - Reichling, K. A1 - Wiggenhauser, Herbert A1 - Stoppel, Markus A1 - Dobmann, G. A1 - Kurz, J. ED - M.G. Alexander, ED - H.-D. Beushausen, ED - F. Dehn, ED - P. Moyo, T1 - BETOSCAN - An instrumented mobile robot system for the diagnosis of reinforced concrete floors T2 - Proceedings of the international conference on concrete repair, rehabilitation and retrofitting II T2 - 2nd International Conference on Concrete Repair, Rehabilitation and Retrofitting CY - Cape Town, South Africa DA - 2008-11-24 KW - Corrosion KW - Diagnosis KW - Steel KW - Concrete KW - Reinforcement KW - NDT KW - Automated testing KW - Onsite scanner KW - Ultrasonic echo KW - Radar KW - Damage assessment KW - Damage analysis KW - Betoscan PY - 2009 SN - 978-0-415-46850-3 SP - 651 EP - 655 PB - CRC Press CY - Boca Raton AN - OPUS4-18668 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reichling, K. A1 - Raupach, M. A1 - Stoppel, Markus A1 - Kurz, J. ED - Stark, J. T1 - BETOSCAN: Autonom navigierendes Robotersystem zur Diagnose von flächigen Stahlbetonbauteilen T2 - 17. Ibausil - Internationale Baustofftagung T2 - 17. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2009-09-23 KW - BetoScan KW - Betonflächendiagnose KW - Scanner KW - ZfP im Bauwesen PY - 2009 SN - 978-3-00-027265-3 IS - 3.06 SP - 1 EP - 6(?) CY - Weimar AN - OPUS4-22489 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reichling, K. A1 - Raupach, M. A1 - Wiggenhauser, Herbert A1 - Stoppel, Markus A1 - Dobmann, G. A1 - Kurz, J. ED - Odile Abraham, ED - Dérobert, Xavier T1 - BETOSCAN - Robot controlled non-destructive diagnosis of reinforced concrete decks T2 - NDTCE `09 - 7th international symposium on non destructive testing in civil engineering (Proceedings) T2 - NDTCE `09 - 7th international symposium on non destructive testing in civil engineering CY - Nantes, France DA - 2009-06-30 KW - BetoScan KW - Betonflächendiagnose KW - Scanner KW - ZfP im Bauwesen KW - Automation KW - Corrosion KW - Potential mapping KW - Repair KW - Non destructive testing KW - Diagnosis PY - 2009 SN - 978-2-7208-2542-5 SN - 1628-4704 IS - Paper 77 SP - 425 EP - 432 AN - OPUS4-22487 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reichling, K. A1 - Raupach, M. A1 - Wiggenhauser, Herbert A1 - Stoppel, Markus A1 - Dobmann, G. A1 - Kurz, J. T1 - BETOSCAN - A robotic system for simultaneous diagnoses of reinforced concrete structures T2 - NUCPERF 2009 - Long term performance of cementitious barriers and reinforced concrete in nuclear power plants and waste management (Proceedings) T2 - NUCPERF 2009 - Long term performance of cementitious barriers and reinforced concrete in nuclear power plants and waste management CY - Cadarache, France DA - 2009-03-30 KW - Diagnosis KW - Steel KW - Reinforced concrete KW - BetoScan KW - Betonflächendiagnose KW - Scanner KW - ZfP im Bauwesen KW - Non destructive testing KW - Corrosion PY - 2009 SN - 978-2-35158-072-1 N1 - Serientitel: RILEM proceedings – Series title: RILEM proceedings IS - 64 SP - 1 EP - 7(?) PB - RILEM Publ. CY - Bagneux AN - OPUS4-22485 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Stoppel, Markus T1 - Differenzpotentialfeldmessung in der automatisierten Prüfung von Stahlbetonbauteilen N2 - Die Potentialfeldmessung ist eines der wichtigsten zerstörungsfreien Prüfverfahren für die Zustandsbewertung von Stahlbetonbauteilen. Mit dieser Methode kann eine ortsabhängige Wahrscheinlichkeit für aktive, chloridinduzierte Bewehrungskorrosion bestimmt werden. Bei der konventionellen Anwendung wird über ein langes Schleppkabel eine Verbindung zwischen einem Messgerät und der Bewehrung hergestellt. Eine Interpretation der Messergebnisse wird anhand der absoluten Potentialwerte durchgeführt. Die Zuordnung zu aktiven oder passiven Zustanden der Bewehrung ist dabei nicht eindeutig. Eine zuverlässigere Methode der Bewertung des Korrosionspotentials ist jedoch die Bestimmung der Gradienten der Messspannungen. Das vorrangige Ziel dieser Arbeit ist es, die Potentialfeldmessung zu einem vollkommen zerstörungsfreien Differenzpotentialfeldmessverfahren (DP-Messung) weiter zu entwickeln, mit dem die Potentialgradienten direkt gemessen werden und bei dem auf die permanente Ankoppelung an die Bewehrung verzichtet werden kann. Die Arbeit fasst die Entwicklungsschritte zusammen und definiert die Bewertungskriterien für die DP-Messung, die die Qualität der Interpretation verbessern. Anhand der neu definierten Gradientenbreite wird aufgezeigt, wie die Detektionswahrscheinlichkeit für korrosionsaktive Bereiche erhöht wird. Es wird gezeigt, wie die automatisierte Kombination des Verfahrens mit großflächigen Messungen des Feuchtegehalts und der Betondeckung zu einer zuverlässigeren Zustandsbewertung führt. N2 - The half-cell potential test is one of the most important non-destructive testing techniques used for condition evaluation of reinforced concrete structures. This method gives the probability of chloride-induced corrosion in steel reinforcing rebars. The conventional approach involves exposing a rebar and using a long wire to connect the measurement device to the rebar. An interpretation of the measurement results is carried out based on the absolute potential values. The assignment to active or passive states of the reinforcement is not unique. However, it has been recently found that the gradient of the measured potentials provides a more reliable assessment of the corrosion potential of reinforcements. The primary objective of this work was to enhance the potential mapping technique by developing a difference potential mapping (DP-method), which can directly measure the potential gradients. Taking this new approach, a permanent connection to the rebar would be no longer required. The work summarizes the development details and the assessment criteria for the DPmethod, which improves the quality of interpretation. The newly defined gradient-width Shows how the detection probability of corrosion-active areas is improved. Moreover, it has been shown that combining the potential measurements with automated large-scale measuring the concrete cover and moisture content lead to a more reliable condition assessment. T3 - BAM Dissertationsreihe - 75 KW - Detektion KW - Zerstörungsfreie Prüfung KW - Stahlbeton KW - Elektrochemische Korrosion KW - Potentialfeld PY - 2011 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-833 SN - 978-3-9814281-5-5 SN - 1613-4249 VL - 75 SP - 1 EP - 183 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-83 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stoppel, Markus A1 - Taffe, Alexander A1 - Wiggenhauser, Herbert A1 - Kurz, J.H. A1 - Boller, C. T1 - Automated multi-sensor systems in civil engineering for condition assessment of concrete structures T2 - Concrete Solutions 2011, 4th International Conference on Concrete Repair T2 - Concrete Solutions 2011, 4th International Conference on Concrete Repair CY - Dresden, Germany DA - 2011-09-26 PY - 2011 AN - OPUS4-24680 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stoppel, Markus T1 - BetoScan "Selbstfahrendes Scannersystem für Betonflächendiagnosen" T2 - Bauwerksdiagnose 2008 T2 - Bauwerksdiagnose 2008 CY - Berlin, Germany DA - 2008-02-21 PY - 2008 AN - OPUS4-16678 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stoppel, Markus T1 - BetoScan "Selbstfahrendes Scannersystem für Betonflächendiagnosen" T2 - Technische Akademie Esslingen, 3. Kolloquium "Verkehrsbauten" T2 - Technische Akademie Esslingen, 3. Kolloquium "Verkehrsbauten" CY - Ostfildern, Germany DA - 2008-01-29 PY - 2008 AN - OPUS4-16518 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stoppel, Markus ED - Susanne Gieler-Breßmer, T1 - BetoScan - Selbstfahrendes Scannersystem für Betonflächendiagnosen T2 - 3. Kolloquium Verkehrsbauten - Schwerpunkt Parkhäuser/Brücken, 29.- 30.1.2008, Ostfildern T2 - 3. Kolloquium Verkehrsbauten - Schwerpunkt Parkhäuser/Brücken CY - Ostfildern, Deutschland DA - 2008-01-29 KW - BetoScan KW - Betonflächendiagnose KW - Scanner KW - ZfP im Bauwesen PY - 2008 SN - 3-924813-72-8 IS - Tagungshandbuch 2008 SP - 1 EP - 3 AN - OPUS4-18660 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stoppel, Markus A1 - Bartholmai, Matthias A1 - Petrov, Sergej A1 - Fakhouri, A. T1 - Suitability of Embedded RFID-Sensors for Concrete Bridge Structures T2 - 31st DANUBIA-ADRIA Symposium on Advances in Experimental Mechanics, , 24.09.-27.09.2014 T2 - 31st DANUBIA-ADRIA Symposium on Advances in Experimental Mechanics, , 24.09.-27.09.2014 CY - Kempten, Germany DA - 2014-09-24 PY - 2014 AN - OPUS4-31642 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -