TY - CONF A1 - Stoppel, Markus A1 - Taffe, Alexander A1 - Wiggenhauser, Herbert A1 - Kurz, J.H. A1 - Boller, C. T1 - Automated multi-sensor systems in civil engineering for condition assessment of concrete structures T2 - Concrete Solutions 2011, 4th International Conference on Concrete Repair T2 - Concrete Solutions 2011, 4th International Conference on Concrete Repair CY - Dresden, Germany DA - 2011-09-26 PY - 2011 AN - OPUS4-24680 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst A1 - Helmerich, Rosemarie A1 - Streicher, Doreen A1 - Stoppel, Markus A1 - Wiggenhauser, Herbert ED - Forde, M. T1 - Automated non-destructive investigation of railway bridge condition T2 - Structural faults & repair 2006 (Proceedings) T2 - 11th International Conference and Exhibiton "Structural Faults and Repair - 2006" CY - Edinburgh, Scotland, UK DA - 2006-06-13 KW - Non-Destructive Testing KW - Automated scanning device KW - Combination of methods KW - Ultrasonic-echo KW - Impact-echo KW - Impulse radar PY - 2006 SN - 0-947644-59-8 SP - 1 EP - 8(?) PB - Engineering Technics Pr., CY - Edingburgh AN - OPUS4-12530 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zoëga, Andreas A1 - Stoppel, Markus A1 - Feldmann, Rüdiger T1 - Automatisierte Multisensorsysteme zur Zustandsbewertung T2 - Fachtagung Bauwerksdiagnose 2012 - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben T2 - Fachtagung Bauwerksdiagnose 2012 - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2012-02-23 KW - Bauwesen KW - Zerstörungsfreie Prüfung KW - Automatisierung KW - Multisensorsysteme / BetoScan / ZFP-Scanner PY - 2012 SN - 978-3-940283-40-5 IS - DGZfP-BB 134 (Vortrag 07) SP - 1 EP - 9 CY - Berlin AN - OPUS4-25548 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zoëga, Andreas A1 - Stoppel, Markus A1 - Feldmann, Rüdiger T1 - Automatisierte Multisensorsysteme zur Zustandsbewertung T2 - Fachtagung Bauwerksdiagnose 2012, Praktische Anwendungen Zerstörungsfreier Prüfungen und Zukunftsaufgaben T2 - Fachtagung Bauwerksdiagnose 2012, Praktische Anwendungen Zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Germany DA - 2012-02-23 PY - 2012 AN - OPUS4-25855 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Stoppel, Markus A1 - Mielentz, Frank A1 - Wiggenhauser, Herbert T1 - Automatisierung in der zerstörungsfreien Prüfung T2 - Verkehrsbauten - Flächentragwerke (Beton-Kalender 2007) KW - Automatisierte ZfPBau-Verfahren KW - Radar KW - Ultraschallecho KW - Impact-Echo KW - Spannbetonbrücken PY - 2006 SN - 978-3-433-01833-0 SN - 0342-7617 VL - 96-1 IS - Kap. V / Abschnitt 10 SP - 562 EP - 567 PB - Ernst CY - Berlin AN - OPUS4-14435 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Taffe, Alexander A1 - Stoppel, Markus A1 - Kurz, J.H. T1 - Bestandsaufnahme und Zustandsanalyse von Brücken und Parkhäusern mit automatisierten Verfahren T2 - Fachtagung Bauwerksdiagnose 2010 - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2010-02-18 KW - Zerstörungsfreie Prüfung im Bauwesen KW - ZfPBau KW - Kombination KW - OSSCAR KW - BetoScan KW - Roboterplattform KW - Bauwerkscanner PY - 2010 SN - 978-3-940283-24-5 IS - DGZfP-BB 121 (Vortrag 15) SP - 1 EP - 9 CY - Berlin AN - OPUS4-20926 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stoppel, Markus T1 - BetoScan "Selbstfahrendes Scannersystem für Betonflächendiagnosen" T2 - Bauwerksdiagnose 2008 T2 - Bauwerksdiagnose 2008 CY - Berlin, Germany DA - 2008-02-21 PY - 2008 AN - OPUS4-16678 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stoppel, Markus T1 - BetoScan "Selbstfahrendes Scannersystem für Betonflächendiagnosen" T2 - Technische Akademie Esslingen, 3. Kolloquium "Verkehrsbauten" T2 - Technische Akademie Esslingen, 3. Kolloquium "Verkehrsbauten" CY - Ostfildern, Germany DA - 2008-01-29 PY - 2008 AN - OPUS4-16518 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reichling, K. A1 - Raupach, M. A1 - Wiggenhauser, Herbert A1 - Stoppel, Markus A1 - Dobmann, G. A1 - Kurz, J. T1 - BETOSCAN - A robotic system for simultaneous diagnoses of reinforced concrete structures T2 - NUCPERF 2009 - Long term performance of cementitious barriers and reinforced concrete in nuclear power plants and waste management (Proceedings) T2 - NUCPERF 2009 - Long term performance of cementitious barriers and reinforced concrete in nuclear power plants and waste management CY - Cadarache, France DA - 2009-03-30 KW - Diagnosis KW - Steel KW - Reinforced concrete KW - BetoScan KW - Betonflächendiagnose KW - Scanner KW - ZfP im Bauwesen KW - Non destructive testing KW - Corrosion PY - 2009 SN - 978-2-35158-072-1 N1 - Serientitel: RILEM proceedings – Series title: RILEM proceedings IS - 64 SP - 1 EP - 7(?) PB - RILEM Publ. CY - Bagneux AN - OPUS4-22485 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Raupach, M. A1 - Reichling, K. A1 - Wiggenhauser, Herbert A1 - Stoppel, Markus A1 - Dobmann, G. A1 - Kurz, J. ED - M.G. Alexander, ED - H.-D. Beushausen, ED - F. Dehn, ED - P. Moyo, T1 - BETOSCAN - An instrumented mobile robot system for the diagnosis of reinforced concrete floors T2 - Proceedings of the international conference on concrete repair, rehabilitation and retrofitting II T2 - 2nd International Conference on Concrete Repair, Rehabilitation and Retrofitting CY - Cape Town, South Africa DA - 2008-11-24 KW - Corrosion KW - Diagnosis KW - Steel KW - Concrete KW - Reinforcement KW - NDT KW - Automated testing KW - Onsite scanner KW - Ultrasonic echo KW - Radar KW - Damage assessment KW - Damage analysis KW - Betoscan PY - 2009 SN - 978-0-415-46850-3 SP - 651 EP - 655 PB - CRC Press CY - Boca Raton AN - OPUS4-18668 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wiggenhauser, Herbert A1 - Stoppel, Markus A1 - Strangfeld, Christoph T1 - BETOSCAN - Parkdeck Multisensorik - selbst fahrendes Scannersystem für Betonflächendiagnosen N2 - BETOSCAN ist eine selbst fahrende und selbst navigierende Plattform für Sensoren und Messgeräte. KW - ZfP KW - Zerstörungsfreie Prüfung KW - Multisensorik KW - Korrosionsindikation KW - Sensoren KW - Messgeräte PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-387431 SP - 1 EP - 3 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-38743 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reichling, K. A1 - Raupach, M. A1 - Wiggenhauser, Herbert A1 - Stoppel, Markus A1 - Dobmann, G. A1 - Kurz, J. ED - Odile Abraham, ED - Dérobert, Xavier T1 - BETOSCAN - Robot controlled non-destructive diagnosis of reinforced concrete decks T2 - NDTCE `09 - 7th international symposium on non destructive testing in civil engineering (Proceedings) T2 - NDTCE `09 - 7th international symposium on non destructive testing in civil engineering CY - Nantes, France DA - 2009-06-30 KW - BetoScan KW - Betonflächendiagnose KW - Scanner KW - ZfP im Bauwesen KW - Automation KW - Corrosion KW - Potential mapping KW - Repair KW - Non destructive testing KW - Diagnosis PY - 2009 SN - 978-2-7208-2542-5 SN - 1628-4704 IS - Paper 77 SP - 425 EP - 432 AN - OPUS4-22487 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stoppel, Markus ED - Susanne Gieler-Breßmer, T1 - BetoScan - Selbstfahrendes Scannersystem für Betonflächendiagnosen T2 - 3. Kolloquium Verkehrsbauten - Schwerpunkt Parkhäuser/Brücken, 29.- 30.1.2008, Ostfildern T2 - 3. Kolloquium Verkehrsbauten - Schwerpunkt Parkhäuser/Brücken CY - Ostfildern, Deutschland DA - 2008-01-29 KW - BetoScan KW - Betonflächendiagnose KW - Scanner KW - ZfP im Bauwesen PY - 2008 SN - 3-924813-72-8 IS - Tagungshandbuch 2008 SP - 1 EP - 3 AN - OPUS4-18660 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reichling, K. A1 - Raupach, M. A1 - Stoppel, Markus A1 - Kurz, J. ED - Stark, J. T1 - BETOSCAN: Autonom navigierendes Robotersystem zur Diagnose von flächigen Stahlbetonbauteilen T2 - 17. Ibausil - Internationale Baustofftagung T2 - 17. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2009-09-23 KW - BetoScan KW - Betonflächendiagnose KW - Scanner KW - ZfP im Bauwesen PY - 2009 SN - 978-3-00-027265-3 IS - 3.06 SP - 1 EP - 6(?) CY - Weimar AN - OPUS4-22489 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kurz, J. A1 - Rieder, H. A1 - Stoppel, Markus A1 - Taffe, Alexander ED - Odile Abraham, ED - Dérobert, Xavier T1 - Control and data acquisition of automated multi-sensor systems in civil engineering T2 - NDTCE `09 - 7th international symposium on non destructive testing in civil engineering (Proceedings) T2 - NDTCE `09 - 7th international symposium on non destructive testing in civil engineering CY - Nantes, France DA - 2009-06-30 KW - Multisensorik KW - Data acquisition KW - Betonflächendiagnose KW - Scanner KW - ZfP im Bauwesen KW - NDT KW - Diagnosis KW - Quality assurance KW - Multi-sensor KW - Automated data acquisition PY - 2009 SN - 978-2-7208-2542-5 SN - 1628-4704 IS - Paper 77 SP - 433 EP - 439 AN - OPUS4-22488 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Stoppel, Markus T1 - Differenzpotentialfeldmessung in der automatisierten Prüfung von Stahlbetonbauteilen N2 - Die Potentialfeldmessung ist eines der wichtigsten zerstörungsfreien Prüfverfahren für die Zustandsbewertung von Stahlbetonbauteilen. Mit dieser Methode kann eine ortsabhängige Wahrscheinlichkeit für aktive, chloridinduzierte Bewehrungskorrosion bestimmt werden. Bei der konventionellen Anwendung wird über ein langes Schleppkabel eine Verbindung zwischen einem Messgerät und der Bewehrung hergestellt. Eine Interpretation der Messergebnisse wird anhand der absoluten Potentialwerte durchgeführt. Die Zuordnung zu aktiven oder passiven Zustanden der Bewehrung ist dabei nicht eindeutig. Eine zuverlässigere Methode der Bewertung des Korrosionspotentials ist jedoch die Bestimmung der Gradienten der Messspannungen. Das vorrangige Ziel dieser Arbeit ist es, die Potentialfeldmessung zu einem vollkommen zerstörungsfreien Differenzpotentialfeldmessverfahren (DP-Messung) weiter zu entwickeln, mit dem die Potentialgradienten direkt gemessen werden und bei dem auf die permanente Ankoppelung an die Bewehrung verzichtet werden kann. Die Arbeit fasst die Entwicklungsschritte zusammen und definiert die Bewertungskriterien für die DP-Messung, die die Qualität der Interpretation verbessern. Anhand der neu definierten Gradientenbreite wird aufgezeigt, wie die Detektionswahrscheinlichkeit für korrosionsaktive Bereiche erhöht wird. Es wird gezeigt, wie die automatisierte Kombination des Verfahrens mit großflächigen Messungen des Feuchtegehalts und der Betondeckung zu einer zuverlässigeren Zustandsbewertung führt. N2 - The half-cell potential test is one of the most important non-destructive testing techniques used for condition evaluation of reinforced concrete structures. This method gives the probability of chloride-induced corrosion in steel reinforcing rebars. The conventional approach involves exposing a rebar and using a long wire to connect the measurement device to the rebar. An interpretation of the measurement results is carried out based on the absolute potential values. The assignment to active or passive states of the reinforcement is not unique. However, it has been recently found that the gradient of the measured potentials provides a more reliable assessment of the corrosion potential of reinforcements. The primary objective of this work was to enhance the potential mapping technique by developing a difference potential mapping (DP-method), which can directly measure the potential gradients. Taking this new approach, a permanent connection to the rebar would be no longer required. The work summarizes the development details and the assessment criteria for the DPmethod, which improves the quality of interpretation. The newly defined gradient-width Shows how the detection probability of corrosion-active areas is improved. Moreover, it has been shown that combining the potential measurements with automated large-scale measuring the concrete cover and moisture content lead to a more reliable condition assessment. T3 - BAM Dissertationsreihe - 75 KW - Detektion KW - Zerstörungsfreie Prüfung KW - Stahlbeton KW - Elektrochemische Korrosion KW - Potentialfeld PY - 2011 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-833 SN - 978-3-9814281-5-5 SN - 1613-4249 VL - 75 SP - 1 EP - 183 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-83 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Taffe, Alexander A1 - Kind, Thomas A1 - Stoppel, Markus A1 - Wiggenhauser, Herbert ED - M.G. Alexander, ED - H.-D. Beushausen, ED - F. Dehn, ED - P. Moyo, T1 - OSSCAR - Development of an On-Site SCAnneR for automated non-destructive bridge testing T2 - Proceedings of the international conference on concrete repair, rehabilitation and retrofitting II T2 - 2nd International Conference on Concrete Repair, Rehabilitation and Retrofitting CY - Cape Town, South Africa DA - 2008-11-24 KW - NDT KW - Automated bridge testing KW - Onsite scanner KW - Ultrasonic echo KW - Radar KW - Damage assessment KW - Damage analysis KW - OSSCAR PY - 2009 SN - 978-0-415-46850-3 SP - 541 EP - 545 PB - CRC Press CY - Boca Raton AN - OPUS4-18602 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Taffe, Alexander A1 - Kind, Thomas A1 - Stoppel, Markus A1 - Kurz, J. H. T1 - OSSCAR-Bauwerkscanner: Automatisierte Datenaufnahme von Radar, Ultraschall und Wirbelstrom an Spannbetonbauteilen mit bildgebender Darstellung der inneren Konstruktion T2 - DGZfP-Jahrestagung 2011 N2 - Bereits seit vielen Jahren stehen Anwendern der zerstörungsfreien Prüfung im Bauwesen (ZfPBau) zuverlässige Geräte für Radar-, Wirbelstrom- und Ultraschallmessungen an Betonbauteilen zur Verfügung. Doch erst die Kombination dieser drei Verfahren an einer Messfläche erlaubt den maximalen Informationsgewinn über die innere Konstruktion von Stahlbeton- und Spannbetonbauteilen. Mit dem OSSCAR-Bauwerkscanner wurden diese drei Verfahren erstmals zur kombinierten und automatisierten Datenaufnahme an einem Scannerrahmen und unter einer Software vereint. Die Ergebnisse werden bildgebend in frei wählbaren Schnitten dargestellt, was eine Rekonstruktion von Bauteilen erlaubt, für die keine Planunterlagen vorliegen. T2 - DGZfP-Jahrestagung 2011 CY - Bremen, Germany DA - 30.05.2011 KW - Zerstörungsfreie Prüfung im Bauwesen KW - Bauwerkscanner KW - Brückenprüfung KW - Ultraschall KW - Radar KW - Wirbelstrom KW - Kombination PY - 2011 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-253767 SN - 978-3-940283-33-7 IS - DGZfP-BB 127 (Mi.3.B.1) SP - 1 EP - 8 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) AN - OPUS4-25376 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stoppel, Markus A1 - Kurz, J.H. A1 - Taffe, Alexander A1 - Boller, C. ED - Chang, F.-K. T1 - Proactive condition assessment in civil engineering using automated multi-sensor systems T2 - IWSHM 2011 - 8th International workshop on structural health monitoring 2011 (Proceedings) N2 - Infrastructure is subject to continuous ageing. This has given life cycle management of infrastructure an increasing role. Reliable inspection and monitoring tools are therefore an increasing demand. A combination of different non-destructive test methods is often necessary to receive reliable results for material characterization, flaw detection and the determination of component specific geometry parameters. Regarding concrete structures thickness measurements are combined with flaw detection and additional information about reinforcement and tendon ducts is required. Therefore, a multi-sensor measurement approach is necessary with a high degree of automation. Otherwise a time consuming succession of manual measurements has to be performed which would prevent practical applications. A modular control and data acquisition approach is described and the application of two different automated measurement devices is shown. The BetoScan system consists of a self-navigating mobile robot. The system is especially designed for the investigation of reinforced concrete floors exposed to de-icing salts. The data acquisition of the OSSCAR system a multi-sensor scanner is similar to the robot approach. These different applications are based on a similar kernel allowing the modular use of different contact and noncontact sensors. The described general concept of multi-sensor data acquisition and data analysis presented here is not limited to the field of civil engineering applications. T2 - 8th International workshop on structural health monitoring 2011 CY - Stanford, CA, USA DA - 13.09.2011 KW - Multi sensor KW - Data acquisition KW - Assessment of concrete structures KW - Scanner KW - NDT PY - 2011 SN - 978-1-60595-053-2 VL - 2 SP - 2359 EP - 2366 PB - DEStech Publications, Inc. AN - OPUS4-24692 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stoppel, Markus A1 - Kurz, J.H. A1 - Reichling, K. T1 - Selbstfahrendes Scannersystem für Betonflächendiagnosen "BetoScan" JF - Messtechnik im Bauwesen KW - BetoScan KW - Betonflächendiagnose KW - Scanner KW - ZfP im Bauwesen PY - 2009 VL - Special 1 SP - 50 EP - 52 PB - Ernst & Sohn CY - Berlin AN - OPUS4-20262 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stoppel, Markus A1 - Bartholmai, Matthias A1 - Petrov, Sergej A1 - Fakhouri, A. T1 - Suitability of Embedded RFID-Sensors for Concrete Bridge Structures T2 - 31st DANUBIA-ADRIA Symposium on Advances in Experimental Mechanics, , 24.09.-27.09.2014 T2 - 31st DANUBIA-ADRIA Symposium on Advances in Experimental Mechanics, , 24.09.-27.09.2014 CY - Kempten, Germany DA - 2014-09-24 PY - 2014 AN - OPUS4-31642 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stoppel, Markus A1 - Fakhouri, A. ED - Grantham, M. ED - Basheer, P. A. M. ED - Magee, B. ED - Soutsos, M. T1 - Suitability of embedded RFID-sensors for concrete bridge structures T2 - Concrete Solutions 2014 (Proceedings) T2 - Concrete Solutions 2014 CY - Belfast, UK DA - 2014-09-01 KW - NDT KW - Embedded sensors KW - RFID KW - Moisture measurement KW - Corrosion PY - 2014 SN - 978-1-138-02708-4 SP - 1 EP - 6(?) PB - CRC Press AN - OPUS4-31723 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helmerich, Rosemarie A1 - Niederleithinger, Ernst A1 - Stoppel, Markus A1 - Wiggenhauser, Herbert ED - Mencik, J. T1 - The role of advanced non-destructive techniques in condition assessment of existing bridges T2 - Proceedings of the 2nd International Conference "Reliability, Safety and Diagnostics of Transport Structures and Means 2005" T2 - 2nd International Conference "Reliability, Safety and Diagnostics of Transport Structures and Means 2005" CY - Parduce, Czech Republic DA - 2005-07-07 KW - Condition assessment KW - Non-destructive testing (NDT) KW - Scanning system KW - Impulse radar KW - Ultrasonic echo KW - Impact echo KW - Active thermography KW - LIBS PY - 2005 SN - 80-7194-769-5 SP - 111 EP - 118 PB - University of Pardubice CY - Pardubice AN - OPUS4-7695 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bartholmai, Matthias A1 - Stoppel, Markus A1 - Petrov, Sergej A1 - Hohendorf, Stefan A1 - Goedecke, Thomas T1 - Two application examples of RFID sensor systems - Identification and diagnosis of concrete components and monitoring of dangerous goods transports T2 - 13th IMEKO TC10 Workshop on technical diagnostics (Proceedings) N2 - The combination of radio-frequency identification (RFID) tags with different types of sensors offers excellent potential for applications with regard to identification, diagnosis, and monitoring. This should be demonstrated by means of two examples of actual developments carried out by the Federal Institute for Materials Research and Testing (BAM). The Identification and diagnosis of concrete components is a major task in the maintenance of critical infrastructure, for instance concrete bridges with heavy traffic volume. A feasibility study investigates the application of RFID sensor systems for this task. The second example reviews the transportation of dangerous goods. Using modern technologies enables promising possibilities to reduce accidents and to avoid non-conformity with transportation regulations. Project results demonstrate an innovative technical solution for monitoring of dangerous goods transports with RFID sensor systems. T2 - 13th IMEKO TC10 Workshop on technical diagnostics CY - Warsaw, Poland DA - 26.04.2014 KW - RFID Sensor systems KW - Monitoring KW - Bridge components KW - Dangerous goods PY - 2014 SN - 978-92-990073-3-4 SP - ID 0019, 111 EP - 115 AN - OPUS4-30990 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bartholmai, Matthias A1 - Stoppel, Markus A1 - Petrov, Sergej A1 - Hohendorf, Stefan A1 - Goedecke, Thomas T1 - Two application examples of RFID sensor systems-identification and diagnosis of concrete components and monitoring of dangerous goods transports JF - Acta IMEKO N2 - The combination of RFID tags and energy efficient sensors offers promising potential for identification, diagnosis, and monitoring applications - particularly when it comes to objacts, which require continuous observation and which are difficult to access with conventional tools. This paper presents two examples as an outlook for RFID sensor systems in embedded structures and in mobile applications. KW - RFID sensors systems KW - Diagnosis of concrete components KW - Monitoring of dangerous goods PY - 2015 SN - 2221-870X VL - 4 IS - 2 SP - 85 EP - 89 CY - Braunschweig AN - OPUS4-33608 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Cotic, P. A1 - Niederleithinger, Ernst A1 - Stoppel, Markus T1 - Unsupervised fusion of scattered data collected by a multi-sensor robot on concrete T2 - DGZfP-Jahrestagung 2014 (Proceedings) N2 - At BAM a multi-sensor robot system BetoScan is used for the investigation of reinforced concrete floors affected by corrosion in parking garages. Potential maps, as well as the distribution of concrete cover and moisture can be assessed simultaneously and data can be collected contactlessly. In order to evaluate the extent of degradation adequately and to divide the investigated structure into zones with defined damage classes, large data sets have to be collected and interpreted manually. Thus, to promote an efficient data evaluation framework, which could speed up and simplify the evaluation of large data sets, an unsupervised data fusion is of major interest. However, taking into account that collected data do not certainly coincide in space, a scattered data interpolation method should be applied prior data fusion. In the paper, a case study involving a BetoScan data set acquired from a reinforced concrete floor of a parking garage in Germany is presented. The data set includes potential mapping, covermeter based on eddy current, as well as microwave moisture measurements. Among the examined methods for interpolation of scattered data, kriging shows to yield smooth interpolated data plots even in the case of very sparse data. In the post-processing step, the investigated structure is efficiently segmented into zones using clustering based data fusion methods, which prove to be robust enough also for handling noisy data. Based on the minimization of the XB validity index, an unsupervised selection of optimal segmentation into damage classes is derived. T2 - DGZfP-Jahrestagung 2014 CY - Potsdam, Germany DA - 26.05.2014 KW - Robot KW - Data fusion KW - Ultrasonics KW - Radar KW - Potential method PY - 2014 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-337943 UR - http://www.ndt.net/article/dgzfp2014/papers/di2c1.pdf SN - 978-3-940283-61-0 IS - DGZfP-BB 148 SP - Di.2.C.1, 1 EP - 8 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) AN - OPUS4-33794 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Taffe, Alexander A1 - Stoppel, Markus A1 - Wiggenhauser, Herbert T1 - Zerstörungsfreie Prüfverfahren im Bauwesen (ZfPBau) T2 - Betoninstandsetzung im Ingenieur- und Wohnungsbau T2 - Betoninstandsetzung im Ingenieur- und Wohnungsbau CY - Filderstadt/Stuttgart, Deutschland DA - 2010-03-04 KW - Zerstörungsfreie Prüfung im Bauwesen KW - ZfPBau KW - Radar KW - Ultraschallecho KW - Automatisierung KW - Radiographie KW - OSSCAR KW - BetoScan PY - 2010 SP - 35 EP - 58 AN - OPUS4-20984 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Stoppel, Markus A1 - Taffe, Alexander A1 - Kurz, J.H. A1 - Reichling, K. ED - Gieler-Breßmer, S. T1 - Zustandsermittlung und Schadensdiagnose für Parkhäuser mit automatisierten zerstörungsfreien Prüfverfahren T2 - 4. Kolloquium Verkehrsbauten - Schwerpunkt Parkhäuser T2 - 4. Kolloquium Verkehrsbauten - Schwerpunkt Parkhäuser CY - Ostfildern, Deutschland DA - 2010-02-02 KW - BetoScan KW - Betonflächendiagnose KW - Scanner KW - ZfP im Bauwesen PY - 2010 SN - 3-924813-82-5 IS - Kap. 11.1 SP - 1 EP - 9 CY - Ostfildern AN - OPUS4-22722 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stoppel, Markus A1 - Wiggenhauser, Herbert A1 - Taffe, Alexander A1 - Kurz, J.H. A1 - Reichling, K. T1 - Zustandsermittlung und Schadensdiagnose für Parkhäuser mit automatisierten zerstörungsfreien Prüfverfahren T2 - 4. Kolloquium Verkehrsbauten, TA Esslingen T2 - 4. Kolloquium Verkehrsbauten, TA Esslingen CY - Ostfildern, Germany DA - 2010-02-02 PY - 2010 AN - OPUS4-22650 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Taffe, Alexander A1 - Kind, Thomas A1 - Stoppel, Markus A1 - Kurz, J.H. ED - Gieler-Breßmer, S. T1 - Zuverlässige Bewehrungsortung: Vom klassischen Handgerät zum automatisierten Bauwerkscanner T2 - 8. Symposium "Kathodischer Korrosionsschutz von Stahlbetonbauwerken" T2 - 8. Symposium "Kathodischer Korrosionsschutz von Stahlbetonbauwerken" CY - Ostfildern, Deutschland DA - 2010-11-18 KW - Zerstörungsfreie Prüfung im Bauwesen KW - Kathodischer Korrsoionsschutz KW - Ortung von Bewehrung KW - Wirbelstrom KW - Radar KW - Ultraschallecho PY - 2010 SN - 3-924813-88-4 SP - 21 EP - 33 AN - OPUS4-22547 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -