TY - CONF A1 - Stark, Wolfgang T1 - Online Kontrolle der Vernetzungsreaktion von Kunststoffen mit Ultraschall T2 - Werkstoffwoche 2004: Kongress für innovative Werkstoffe, Verfahren und Anwendungen CY - Munich, Germany DA - 2004-09-21 PY - 2004 AN - OPUS4-4874 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Kelm, Jürgen A1 - Fritsch, Sebastian ED - Green, R. E. ED - Djordjevic, B. B. ED - Hentschel, M. P. T1 - Rubber processing monitored by ultrasound T2 - 11th International Symposium on Nondestructive Characterization of Materials CY - Berlin, Germany DA - 2002-06-24 PY - 2003 SN - 3-540-40154-7 SP - 659 EP - 664 PB - Springer CY - Berlin AN - OPUS4-2769 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mc Hugh, Jarlath A1 - Stark, Wolfgang A1 - Döring, Joachim ED - Green, R. E. ED - Djordjevic, B. B. ED - Hentschel, M. P. T1 - Evaluation of the cure behaviour of epoxy resin using rheometric and ultrasonic techniques T2 - 11th International Symposium on Nondestructive Characterization of Materials CY - Berlin, Germany DA - 2002-06-24 PY - 2003 SN - 3-540-40154-7 SP - 651 EP - 658 PB - Springer CY - Berlin AN - OPUS4-2772 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fritsch, Sebastian A1 - Stark, Wolfgang A1 - Kelm, Jürgen ED - Kühnert, I. T1 - Möglichkeiten der Online-Kontrolle der Vulkanisation mit Ultraschall T2 - 18. TECHNOMER 2003 ; 18. Fachtagung über Verarbeitung und Anwendung von Polymeren CY - Chemnitz, Deutschland DA - 2003-11-13 KW - Kautschuk KW - Vulkanisation KW - Ultraschall PY - 2003 SN - 3-00-012510-8 SP - 1 EP - 10 PB - Techn. Univ. CY - Chemnitz AN - OPUS4-2822 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Bestimmung der Glasübergangstemperatur von Elastomerdichtungen mit der Dynamisch Mechanischen Analyse DMA - Betrachtungen zur Temperatur-Messgenauigkeit T2 - DMA 242 - Users meeting CY - Selb, Germany DA - 2003-11-26 PY - 2003 AN - OPUS4-4075 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Dielektric Process Monitoring of Thermosetting Resins T2 - DEA-Seminar, Achema-Messe CY - Frankfurt am Main, Germany DA - 2003-05-22 PY - 2003 AN - OPUS4-4071 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - The RTM-Process and the Problems with Gelation, Vitrification and Degree of Curing T2 - 6th Internationale AVK-Tv Conference CY - Baden-Baden, Germany DA - 2003-09-07 PY - 2003 AN - OPUS4-4072 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mc Hugh, Jarlath A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Erhard, Anton T1 - Characterisation of epoxy materials used in the development of ultrasound arrays T2 - 16th World Conference on Nondestructive Testing CY - Montreal, Canada DA - 2004-08-30 PY - 2004 UR - http://www.ndt.net/article/wcndt2004/pdf/materials_characterization/616_mchugh.pdf SP - 8 pages PB - International Committee for Non-Destructive Testing CY - Montreal AN - OPUS4-5215 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mc Hugh, Jarlath A1 - Döring, Joachim A1 - Erhard, Anton A1 - Stark, Wolfgang A1 - Raab, S. T1 - Einfluss hoher Temperaturen und Drücke auf die Ultraschalleigenschaften eines Komposit-Prüfkopfes T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/p12/p12.htm SN - 3-931381-55-2 SP - 1 EP - 7(?) PB - DGZfP CY - Berlin AN - OPUS4-5214 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rabe, Torsten A1 - Eberlee, Ina A1 - Güther, Wolfgang A1 - Stark, Wolfgang T1 - Mechanische und thermomechanische Charakterisierung keramischer Grünfolien KW - Keramische Grünfolien KW - Mechanische Prüfung KW - DMTA PY - 2004 SN - 0173-9913 SN - 0196-6219 VL - 18 IS - 1 SP - 58 EP - 68 PB - Göller CY - Baden-Baden AN - OPUS4-5338 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mielke, Werner A1 - Stark, Wolfgang T1 - Unter Kontrolle - Aushärtung duroplastischer Formmassen PY - 1995 SN - 0047-3766 VL - 29 SP - 35 EP - 37 PB - Verl. Moderne Industrie CY - Landsberg AN - OPUS4-11798 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Optimierung der Nachtemperung von Formteilen für den Einsatz am heißen Motor mit Hilfe der Dynamisch Mechanischen Analyse T2 - 9. Anwendertreffen Dynamisch Mechanische Analyse CY - Selb, Germany DA - 2006-02-14 PY - 2006 AN - OPUS4-12113 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Kontrolle von Aushärtungsverlauf und Aushärtegrad mittels dynamisch mechanischer Analyse und Ultraschall T2 - Rohima - Die deutsche FVK-Messe - Marktplatz Forschung CY - Leipzig, Germany DA - 2006-06-27 PY - 2006 AN - OPUS4-12528 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Charakterisierung von Aushärtungsverlauf und Aushärtungszustand in Labor und Fertigung T2 - Rohima - Die deutsche FVK-Messe - Marktplatz Forschung CY - Leipzig, Germany DA - 2006-06-27 PY - 2006 AN - OPUS4-12534 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Kontrolle des Aushärtungsverlaufs im Werkzeug mit Hilfe von Ultraschall T2 - Rohima - Die deutsche FVK-Messe, Marktplatz Forschung CY - Leipzig, Germany DA - 2006-06-27 PY - 2006 AN - OPUS4-12535 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Optimierung der Nachtemperung von Formteilen mit Hilfe von Thermo- und dynamisch mechanischer Analyse T2 - 8. Internationale Tagung der Arbeitsgemeinschaft Verstärkte Kunststoffe - Technische Vereinigung e. V. (AVK-TV) CY - Baden-Baden, Germany DA - 2005-09-27 PY - 2005 AN - OPUS4-10989 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Cappella, Brunero A1 - Stark, Wolfgang T1 - Adhesion of amorphous polymers as a function of temperature probed with AFM force-distance curves N2 - Force–displacement curves have been obtained with a commercial atomic force microscope at different temperatures and probe rates on a thick film of poly(n-butyl methacrylate) and on two films of polystyrene with different molecular weight. In a previous publication [B. Cappella, S.K. Kaliappan, H. Sturm, Macromolecules 38 (2005)1874] the analysis of force–displacement curves has been focused on the stiffness and on the Young's modulus of the samples. In the present publication we consider the temperature dependence of the work of adhesion. We have obtained master curves of the work of adhesion at fixed maximum loads and, by comparing the results of the two analysis, we show that the work of adhesion follows the Williams–Landel–Ferry equation with the same coefficients previously found for the Young's modulus. Furthermore, we show that the temperature dependence of the work of adhesion of the polymers is a consequence of the temperature dependence of the tip–sample contact area and in the end of the temperature dependence of the stiffness and of the elastic–plastic properties of the samples. KW - Atomic force microscope KW - Force-distance curves KW - Indentation KW - Elastic-plastic properties KW - Adhesion KW - Time-temperature superposition principle KW - Glass transition temperature PY - 2005 DO - https://doi.org/10.1016/j.jcis.2005.09.043 SN - 0021-9797 SN - 1095-7103 SP - 1 EP - 8(?) PB - Elsevier CY - Orlando, Fla. AN - OPUS4-11187 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stark, Wolfgang A1 - Hoster, B. A1 - Kürten, Ch. T1 - Nachtemperung von duroplastischen Bauteilen - Spagat zwischen Eigenschaftsverbesserung und Eigenschaftsverschlechterung PY - 2005 SN - 0176-1625 VL - 58 IS - 11 SP - 718 EP - 722 PB - Gupta CY - Ratingen AN - OPUS4-11592 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Online Überwachung des Spritzgießprozesses mit Hilfe von Ultraschall T2 - 8. Internationale Tagung der Arbeitsgemeinschaft Verstärkte Kunststoffe-Technische Vereinigung e. V. (AVK-TV) CY - Baden-Baden, Germany DA - 2005-09-27 PY - 2005 AN - OPUS4-11622 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Online-Aushärtungskontrolle im Werkzeug - Messprinzip und industrielle Anwendungsbeispiele T2 - 9. Internationale AVK (Arbeitsgemeinschaft verstärkte Kunststoffe) Tagung CY - Essen, Germany DA - 2006-09-19 PY - 2006 AN - OPUS4-13039 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang A1 - Fritsch, Sebastian A1 - Kelm, Jürgen T1 - Vulcanization Monitoring in the Mould by Means of Ultrasound T2 - German Rubber Conference 2006 CY - Nuremberg, Germany DA - 2006-07-03 KW - Vulkanisation KW - Ultraschall KW - Prozesskontrolle KW - Rheologie PY - 2006 SP - 189 EP - 193 PB - Deutsche Kautschuk-Gesellschaft CY - Frankfurt am Main AN - OPUS4-13082 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stark, Wolfgang A1 - Kürten, Ch. T1 - Prozessüberwachung bei duroplastischen Formmassen N2 - Dielektrische Sensoren überwachen den Vernetzungsprozess beim Spritzgießen direkt im Werkzeug. Der Aushärtungszustand wird kontinuierlich verfolgt, Abweichungen werden erkannt und die Zykluszeit optimiert. KW - Prozesskontrolle KW - Aushärtegrad KW - Kochversuch KW - Harnstoffformasse KW - Dielektrik PY - 2006 SN - 0023-5563 IS - 7 SP - 97 EP - 100 PB - Hanser CY - München AN - OPUS4-13084 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Investigation of curing of epoxy resin composite materials by dynamic mechanical analysis (DMA) T2 - Polydays 2006 CY - Berlin, Germany DA - 2006-10-04 PY - 2006 AN - OPUS4-13447 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Post-annealing of thermosets T2 - 4th International Thermoset Conference CY - Iserlohn, Germany DA - 2006-11-16 PY - 2006 AN - OPUS4-13801 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krüger, Simone A1 - Stark, Wolfgang A1 - Goering, Harald A1 - Michel, Uwe T1 - Thermoanalyse der Phenolharzhärtung - Ein Weg zur Optimierung der Nachtemperung N2 - Angesichts der spezifischen Bedeutung der Aushärtung von Phenolharzen für ihre Eigenschaften als Ingenieurwerkstoffe besteht großes Interesse an deren quantitativer Charakterisierung. Mittels DSC-Messungen unter hohem Druck (HP-DSC) kann die Vernetzungsreaktion der Phenolharzformmassen durch die Unterdrückung der Verdampfung niedermolekularer Substanzen ohne störende Überlagerungen verfolgt werden. Mittels verschiedener Vernetzungsgrade können die Einflussparameter der Aufheizrate und der Nachtemperung optimiert werden. Die Messergebnisse ermöglichen eine Modellierung der Reaktionskinetik mit dem Ziel einer verbesserten Prozessführung und Qualitätskontrolle in der industriellen Praxis. KW - Phenolharze KW - Thermische Analyse KW - DMA KW - DSC KW - Aushärtung KW - Glasübergang PY - 2006 SN - 0025-5300 VL - 48 IS - 11-12 SP - 556 EP - 561 PB - Carl Hanser Verlag CY - München AN - OPUS4-13802 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mc Hugh, Jarlath A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Guey, J. L. T1 - Relationship between the Mechanical and Ultrasound Properties of Polymer Materials T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - Ultrasound KW - DMA KW - Epoxy KW - Modulus KW - tan delta KW - High temperature PY - 2006 SN - 3-931381-86-2 SP - 1(?) EP - 9(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-14065 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Ungesättigte Polyesterharze, BMC und SMC - Charakterisierung von Reifung bis Aushärtung T2 - 8. Internationale Tagung der Arbeitsgemeinschaft Verstärkte Kunststoffe - Technische Vereinigung e. V. (AVK-TV) CY - Baden-Baden, Germany DA - 2005-09-27 PY - 2005 AN - OPUS4-14333 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stark, Wolfgang A1 - Hoster, B. A1 - Kürten, C. T1 - Längenänderung bei erhöhten Temperaturen und Aushärtegrad von duroplastischen Formteilen KW - Harnstoffharze KW - Verzug KW - Spritzgießen KW - Aushärtegrad KW - Schrumpf PY - 2006 SN - 0176-1625 VL - 59 IS - 10 SP - 627 EP - 631 PB - Gupta CY - Ratingen AN - OPUS4-14444 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Bartusch, Jürgen A1 - Mc Hugh, Jarlath A1 - Simon, W. T1 - Ultraschall-Prozesskontrolle mechanischer Parameter von aushärtenden Polymeren - Inline-Sensorik für die Herstellung von Kunststoffkomponenten KW - Aushärtung KW - Ultraschall KW - Sensoren KW - Materialparameter PY - 2007 SN - 0025-5300 VL - 49 IS - 5 SP - 238 EP - 242 PB - Hanser CY - München AN - OPUS4-14976 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Qualitätskontrolle von Duroplasten unter besonderer Berücksichtigung der Phenoplaste aus heutiger Sicht T2 - Baekeland-Tag 2008 CY - Erkner, Germany DA - 2008-02-22 PY - 2008 AN - OPUS4-16685 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Untersuchungen zum Vernetzungsgrad von Duromeren mittels Methoden der thermischen Analyse T2 - 1. Wildauer Duromer-Tagung CY - Wildau, Germany DA - 2008-03-11 PY - 2008 AN - OPUS4-16721 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Charakterisierung von Aushärtungsverlauf und Aushärtungszustand von reaktiven Harzen zur Composit-Herstellung in Labor und Fertigungsprozess (RTM, Prepreg-Autoklavenhärtung) T2 - Technologietag der Landesinitiative Nano- und Materialinnovationen Niedersachsen CY - Braunschweig, Germany DA - 2011-08-24 PY - 2011 AN - OPUS4-24288 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang A1 - Teteris, Gundars A1 - Braun, Ulrike A1 - Bohmeyer, W. A1 - Lange, K. T1 - Kontrolle der Vernetzungsreaktion bei reaktiven Harzen - DSC, Rheologie, DMA, FTIR und Online-Ultraschall im Vergleich N2 - Faserverbundbauteile werden durch Tränkung von Fasergewebe mit flüssigem Harz, in der Regel Epoxidharzen, und anschließender Härtung des Harzes gefertigt. Dabei kann man das Gewebe im Vorfeld mit reaktivem Harz tränken und als so genanntes Prepreg verarbeiten oder man injiziert das frisch mit dem Härter gemischte Harz in ein Werkzeug, in dem das Gewebe bereits liegt - z. B. beim RTM-Prozess. Ausgehend von der Aufgabenstellung, eine Prepregherstellung mit hohem Qualitätsstandard zu realisieren und Möglichkeiten der Fertigungskontrolle für den Prepreg-Verarbeiter aufzuzeigen, wurde an einem für die Prepregherstellung vorgesehenen Harzsystem eine weitgehende Charakterisierung des Aushärtungsverlaufs vorgenommen. Wegen der Schwierigkeit, schnell konstante Aushärtungstemperaturen zu erreichen, wurden bei allen Methoden mit einer Heizrate von 1 K/min von RT bis 200 °C aufgeheizt. T2 - Technomer 2011 - 22. Fachtagung über Verarbeitung und Anwendung von Polymeren CY - Chemnitz, Deutschland DA - 10.11.2011 KW - Thermoanalyse KW - Lineare Aufheizung KW - Online Prozesskontrolle KW - Epoxidharz KW - Prepreg PY - 2011 SN - 978-3-939382-10-2 IS - Kap. 1.1 SP - 1 EP - 9 AN - OPUS4-24910 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Kontrolle der Vernetzungsreaktion bei reaktiven Harzen - DSC, Rheologie, DMA, FTIR und Online-Ultraschall im Vergleich T2 - Technomer - 22. Fachtagung über Verarbeitung und Anwendung von Polymeren CY - Chemnitz, Germany DA - 2011-11-10 PY - 2011 AN - OPUS4-24900 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Einsatz thermoanalytischer Methoden bei der Charakterisierung vernetzender Kunststoffe T2 - Anwenderseminar zur Thermoanalyse, Netzsch, Analytica 2012 CY - Munich, Germany DA - 2012-04-18 PY - 2012 AN - OPUS4-25890 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Investigation of Crosslinking and degradation process by infrared Spectroscopy T2 - 4th bilateral Symposium on heterocyclic and heterochain polymers for advanced materials CY - Iasi, Romania DA - 2012-09-03 PY - 2012 AN - OPUS4-26493 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - BAM - Federal Institute for Materials Research and Testing - experiences in the field of quality management at thermosets T2 - 4th Bilaterial Symposium on heterocyclic and heterochain polymers for advanced materials CY - Iasi, Romania DA - 2012-09-03 PY - 2012 AN - OPUS4-26518 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Characterisation of curing behaviour of carbon fibre epoxy prepreg (CFK, CFC)-analysis of non-cured prepreg and autoclave curing process T2 - 7th International CFK-Valley Stade Convention - Latest Innovations in CFRP Technology CY - Stade, Germany DA - 2013-06-11 PY - 2013 AN - OPUS4-27835 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Modelling of curing behaviour of epoxy resin based on DSC data T2 - 7th International Thermoset Conference CY - Iserlohn, Germany DA - 2013-04-17 PY - 2013 AN - OPUS4-27838 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Stark, Wolfgang A1 - Bohmeyer, W. ED - Karbhari, V.M. T1 - Non-destructive evaluation (NDE) of composites: using ultrasound to monitor the curing of composites N2 - Typical composite materials for lightweight construction consist of a fibre (glass or carbon) reinforced thermosetting matrix. The impregnation of the fabric is made with liquid resin – usually epoxy resin or unsaturated polyester resin are used. The main processing methods are resin transfer moulding (RTM) and prepreg technology often used in combination with autoclave curing. After shaping, the resin must be cured. The final properties of the produced parts depend on the curing degree and the final glass transition temperature. Analytical methods and the use of ultrasound for online cure monitoring in the manufacturing process are introduced. Examples for the application of ultrasonic cure monitoring for the production of composite parts for traffic systems are also covered. KW - Epoxy KW - DSC KW - DMA KW - Kinetic KW - Autoclave KW - Curing KW - Glass transition KW - Curing behaviour KW - Curing degree KW - Rheology KW - Differential scanning calorimetry KW - Dynamic mechanical analysis KW - Sound velocity KW - Sound damping KW - Resin transfer moulding KW - RTM KW - Prepreg PY - 2013 SN - 978-0-85709-344-8 SN - 978-0-85709-355-4 DO - https://doi.org/10.1533/9780857093554.1.136 SN - 2052-5281 SN - 2052-529X N1 - Serientitel: Woodhead publishing sereies in composites science and engineering – Series title: Woodhead publishing sereies in composites science and engineering VL - 43 IS - Part 1 / Chapter 7 SP - 136 EP - 181 PB - Woodhead Publishing Ltd CY - Cambridge, UK AN - OPUS4-28848 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stark, Wolfgang T1 - Investigation of the curing behaviour of carbon fibre epoxy prepreg by dynamic mechanical analysis DMA N2 - Carbon fibre prepregs have found widespread application in lightweight constructions. They are based on a carbon fibre fabric impregnated with reactive epoxy resin. Measurements were carried out using commercially available prepreg material. For Dynamic Mechanical Analysis (DMA), a single cantilever measuring device was applied. The DMA results were refined by additional DSC measurements. The measurements were carried out with dynamic heating in the temperature range -90 to 280 °C. The heating rates were 1 and 2 K/min, respectively. A glass transition of the uncured material (Tg0) near 1 °C, and crosslinking-induced vitrification and devitrification at the maximal glass transition temperature of the cured material (Tgmax) in the temperature range 220 to 230 °C were found. The activation energies for the glass transitions were determined using an Arrhenius plot. By detailed consideration of the influence of the frequency on the DMA data, indications for gelation were deduced. KW - CRP KW - Prepreg KW - Carbon fibre KW - Epoxy KW - DMA KW - DSC KW - Glass transition KW - Crosslinking KW - Vitrification KW - Devitrification PY - 2013 DO - https://doi.org/10.1016/j.polymertesting.2012.11.004 SN - 0142-9418 VL - 32 IS - 2 SP - 231 EP - 239 PB - Elsevier Science CY - Amsterdam [u.a.] AN - OPUS4-27584 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stark, Wolfgang T1 - Kinetic Model for Cross-linking Reaction of Epoxy Resin for Rotor Blade Production T2 - Thermosets Conference 2013 - From Monomers to Components CY - Berlin, Germany DA - 2013-09-18 PY - 2013 AN - OPUS4-28701 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bovtun, Viktor Petrovic A1 - Stark, Wolfgang A1 - Kelm, Jürgen A1 - Porokhonskyy, V. A1 - Yakimenko, Y. T1 - Microwave Dielectric Properties of Rubber Compounds Undergoing Vulcanisation - Part 1. Natural rubber with and without carbon black filler KW - Dielectric parameters KW - Microwave methods KW - Vulcanisation KW - Elastomers KW - Monitoring PY - 2000 SN - 0948-3276 SN - 0022-9520 PB - Hüthig CY - Heidelberg AN - OPUS4-1062 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kelm, Jürgen A1 - Stark, Wolfgang A1 - Bovtun, V. A1 - Borisov, V. A1 - Yakimenko, Y. T1 - Investigation of Crosslinking Process in Thermosets and Elastomers by Microwave Methods - Basic Study for the Monitoring Method Development KW - Dielectric parameters KW - Microwave methods KW - Crosslinking KW - Cure KW - Vulcanisation KW - Thermosets KW - Elastomers KW - Monitoring PY - 2000 SN - 0025-5300 PB - Carl Hanser Verlag CY - München AN - OPUS4-1053 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Mc Hugh, Jarlath A1 - Bartusch, Jürgen T1 - Ultrasound on-line cure monitoring for industrial applications N2 - In recent years eure monitoring with ultrasonic methods became more important. An on-line measurement System for industrial applications is presented in this paper. It operates in through-transmission and the measured parameters are the sound velocity and the attenuation of the sound wave. An objective of this paper is to establish the ränge of possible applications for an ultrasonic eure monitoring System. KW - Ultrasonic monitoring KW - Cure process KW - Composite material KW - Process controlling PY - 2000 SN - 0963-6935 PB - Woodhead Publ. CY - Cambridge AN - OPUS4-1061 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bovtun, V. A1 - Stark, Wolfgang A1 - Pashkov, V. A1 - Kelm, Jürgen A1 - Yakimenko, Y. T1 - Microwave On-Line Monitoring of Thermoset Curing PY - 2002 SN - 0025-5300 VL - 44 IS - 7-8 SP - 300 EP - 306 PB - Carl Hanser Verlag CY - München AN - OPUS4-1563 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bovtun, V. A1 - Stark, Wolfgang A1 - Kelm, Jürgen A1 - Porokhonskyy, V. A1 - Yakimenko, Y. T1 - Microwave Dielectric Properties of Rubber Compounds Undergoing Vulcanisation - Part 2. Influence of Carbon Black N2 - The application of microwave measurements to the characterisation of rubber compounds vulcanisation is considered. The behaviour of mechanical and microwave (20 GHz) dielectric parameters during vulcanisation was investigated for rubber compounds with different concentrations of active and non-active carbon black. An increase of concentration or activity of carbon black results in the increase of both dielectric permittivity ε?(T) and loss ε?(T) and in the increase of torsion modulus as well. The start of the vulcanisation reaction is indicated by an increase of dielectric permittivity and torsion modulus in all investigated unvulcanised compounds with carbon black. While for compounds with non-active carbon black the vulcanisation can be better indicated by the ε?(T) anomaly, for compounds with active carbon black it is more clearly seen by the change of ε?(T) behaviour. PY - 2002 UR - http://www.plastverarbeiter.de/ai/resources/d5af83c1e48.pdf SN - 0948-3276 SN - 0022-9520 VL - 55 IS - 1-2 SP - 16 EP - 22 PB - Hüthig CY - Heidelberg AN - OPUS4-1564 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gorokhovatsky, Y.A. A1 - Krüger, Simone A1 - Brademann-Jock, Kerstin A1 - Stark, Wolfgang A1 - Temnov, Dmitri A1 - Kuvshinova, Oksana A1 - Goldade, V.A. ED - Fleming, R. J. T1 - Thermally stimulated luminescence in LDPE fibers T2 - 11th International Symposium on Electrets (ISE 11) CY - Melbourne, Australia DA - 2002-10-01 PY - 2002 SN - 0-7803-7560-2 SP - 138 EP - 140 PB - IEEE Service Center CY - Piscataway, NJ AN - OPUS4-1654 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Kelm, Jürgen A1 - Fritsch, Sebastian T1 - Kontrolle der Kautschukvulkanisation im Werkzeug mit Ultraschall N2 - Zusammenfassung In diesem Beitrag wird zunächst die für die on-line Prozesskontrolle an duroplastischen Formmassen entwickelte Ultraschallmesstechnik vorgestellt. Die Methode basiert auf der Durchschallung des vernetzenden Materials mit Hilfe von in das Werkzeug integrierten druck- und temperaturfesten 4 MHz-Ultraschallsensoren. Die Auswertung von Schalllaufzeit und Signalamplitude erfolgt vollautomatisch und dient der Berechnung von Schallgeschwindigkeit und -dämpfung. Beide Größen repräsentieren die änderung der mechanischen Eigenschaften infolge der Vernetzungsreaktion. Durch Anwendung auf vulkanisierende Materialien sollte die Anwendbarkeit der bewährten Methode erweitert werden. Im Ergebnis wird gezeigt, dass die Größe des Messeffekts von der Menge an Vernetzer (Schwefelkonzentration) abhängt. Bei ausreichend hohem Vernetzungsgrad zeigt die Ultraschallgeschwindigkeit signifikante, gut auswertbare Resultate, die den Ablauf der Vulkanisation on-line zu verfolgen gestatten. Ein Vergleich mit Vulkameterkurven zeigt große ähnlichkeiten und berechtigt zu der Hoffnung, dass die Methode industriellen Einsatz finden kann. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Prozesskontrolle KW - Vulkanisation KW - Vulkameter KW - Ultraschall KW - Schallgeschwindigkeit PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/p21/p21.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1857 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Döring, Joachim A1 - Stark, Wolfgang A1 - Mc Hugh, Jarlath A1 - Bartusch, Jürgen A1 - Fengler, Petra T1 - Rheologische und akustische Bestimmung der Fließ-Härtungseigenschaften von Injektionsharzen N2 - Zusammenfassung Der Ausgangspunkt für diese Arbeiten ist eine in [1] beschriebene Ultraschall-(US)-Sensorik zur Aushärtungskontrolle. Sie wurde für rieselfähige Formmassen entwickelt [2,3]. Darauf aufbauend ist es das Ziel der vorliegenden Arbeit, die Voraussetzungen für den Einsatz dieser Sensorik beim Harzinjektionsverfahren zu schaffen und ihre Kalibrierung durch rheologische und DSC-Messungen zu ermöglichen. Der erste Teil des Beitrages beschäftigt sich mit dem technologischen Ablauf des Harzinjektionsverfahren und den Einsatzmöglichkeiten der US-Sensorik bei dieser Technologie. Ergebnisse von Schallgeschwindigkeits- und Dämpfungsmessungen für EP-Harze werden vorgestellt. Im zweiten Teil wird auf das Kalibrieren der US-Sensorik für den Verarbeiter eingegangen. Es kann mittels der bisherigen Prozessführung oder durch Vergleich mit den Ergebnissen anderer Mess-Verfahren wie Rheometer- oder Differential-Scanning-Calerometry-(DSC)-Messungen erfolgen. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Ultraschall KW - Harzinjektionsverfahren KW - RTM KW - Prozesskontrolle KW - Aushärtung PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/v51/v51.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1913 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Kelm, Jürgen T1 - Ultraschall on-line Prozesskontrolle bei der Vulkanisation KW - Prozesskontrolle KW - Vulkanisation KW - Ultraschall KW - Sensoren KW - Schubmodul KW - Verlustmodul PY - 2000 SN - 0948-3276 SN - 0022-9520 SP - 9 Seiten PB - Hüthig CY - Heidelberg AN - OPUS4-997 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Böhning, Martin A1 - Niebergall, Ute A1 - Adam, Adeline A1 - Stark, Wolfgang T1 - Influence of biodiesel sorption on temperature-dependent impact properties of polyethylene N2 - In a previous paper we investigated the influence of sorbed biodiesel or diesel on mechanical properties of a typical polyethylene grade for tank applications. Besides the basic sorption and desorption behavior of these two fuels, the study addressed the concentration-dependent mechanical properties as revealed by a non-instrumented Charpy impact test and dynamic mechanical analysis (DMA). In the present paper we extend this investigation focusing on the temperature-dependent impact fracture behavior. Therefore, an instrumented Charpy impact test was employed, allowing a more detailed analysis of the fracture behavior. Furthermore, from the load-time-diagrams obtained from the instrumented impact test, corresponding fracture times can be calculated, allowing a clear correlation of the fuel sorption induced changes in fracture toughness with the enhanced ß-relaxation observed by DMA. As in the previous study, the fracture surfaces of the impact tested specimens were analyzed in order to confirm the brittle or ductile character of the fracture indicated by impact strength and the corresponding load-deflection diagrams. KW - Biodiesel KW - Fuel sorption KW - Impact strength KW - Charpy impact test KW - Dynamic-mechanical analysis KW - Relaxation KW - PE-HD PY - 2014 DO - https://doi.org/10.1016/j.polymertesting.2014.09.001 SN - 0142-9418 VL - 40 SP - 133 EP - 142 PB - Elsevier Science CY - Amsterdam [u.a.] AN - OPUS4-31583 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stark, Wolfgang A1 - Döring, Joachim A1 - Walentowski, Heinz-Ulrich T1 - Crosslinking Instead of Glassy Transition N2 - In processing fibre-reinforced composites, the curing reaction can be significantly retarded if the temperature and reaction time are not optimally set. In such situations, complete curing is sometimes impossible under practically relevant conditions. It is difficult for processors to recognize or detect incomplete curing. The equilibrium glass transition temperature plays an important role in complete curing in the production process. PY - 2000 SN - 0945-0084 VL - 90 IS - 4 SP - 33 EP - 35 PB - Hanser CY - München AN - OPUS4-822 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -