TY - GEN A1 - Simon, Franz-Georg A1 - Biermann, Vera A1 - Csovári, M. A1 - Csicsák, J. T1 - Uranium removal using elemental iron and hydroxyapatite in permeable reactive barriers T2 - 8th International Mine Water Association Congress CY - Johannesburg, Republic of South Africa DA - 2003-10-19 PY - 2003 SN - 0-620-31314-5 VL - 8 SP - 43 EP - 55 PB - International Mine Water Association IMWA CY - Johannesburg AN - OPUS4-2776 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Franz-Georg A1 - Adamczyk, Burkart A1 - Kley, Gerd T1 - Refractory materials from waste N2 - The recycling of refractory materials in the chemical, metallurgical and glass industry has only had minor relevance until now because of the high performance required from these materials (stability against corrosion, inert when coming into contact with the glass melt, etc.). Refractory lifetimes are limited because of corrosion at higher temperatures. The best furnace lifetimes has been achieved with chromium oxide and chromium oxide corund refractories. Waste from the production and use of refractory material is generated in three main forms: as residues from cutting and grinding, as refractories which have limited or no contact with glass melts, and as refractories with infiltration of sublimation residues or condensates. The waste material is classified as hazardous waste due to its chromium content. In this study, arc furnace technology was used for thermal treatment of the waste materials to enable recycling of refractory materials. (author abst.) KW - Refractories KW - Thermochemical treatment KW - Chromium oxide KW - Eco-material PY - 2003 UR - https://www.jim.or.jp/journal/e/pdf3/44/07/1251.pdf SN - 1345-9678 SN - 1347-5320 VL - 44 IS - 7 SP - 1251 EP - 1254 PB - Japan Institute of Metals CY - Sendai AN - OPUS4-2832 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Franz-Georg A1 - Segebade, Christian A1 - Hedrich, Martina T1 - Behaviour of uranium in iron-bearing permeable reactive barriers: investigation with 237U as a radioindicator N2 - This study was undertaken to investigate the long-term performance of elemental iron as reactive material for the removal of uranium in passive groundwater remediation systems. By using 237U as a radioindicator it was possible to track the movement of the contamination front through a test column without taking samples or dismantling the apparatus. The stoichiometric ratio between uranium and iron was found to be 1:(1390±62). The reaction between iron and uranium is of pseudo first-order kinetics and the rate constant was measured to be (1.1±0.09)×10-3 s-1. These data enable the calculation of ideal lifetime for permeable reactive barriers (PRB) using iron for uranium removal neglecting hydrological factors that may impair the function of PRBs. KW - Uranium KW - Permeable reactive barriers KW - Radioindicator PY - 2003 DO - https://doi.org/10.1016/S0048-9697(02)00548-X SN - 0048-9697 VL - 307 SP - 231 EP - 238 PB - Elsevier CY - Amsterdam AN - OPUS4-2498 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg T1 - Benchmarking - An Approach to Characterize Ecomaterials T2 - 2nd International Workshop on Ecomaterials CY - Ibaraki, Japan DA - 2002-11-05 PY - 2002 AN - OPUS4-2499 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Franz-Georg A1 - Meggyes, Tamás A1 - Czurda, K. A1 - Roehl, K.E. T1 - Langzeitbeständigkeit von permeablen reaktiven Wänden zur Sanierung kontaminierter Grundwässer PY - 2003 SN - 0942-3818 SN - 1864-8371 VL - 12 IS - 6 SP - 285 EP - 290 PB - Schmidt CY - Berlin AN - OPUS4-2857 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg T1 - Waste treatment by thermochemical materials separation T2 - Workshop Ecomaterials and Recycling CY - Yokohama, Japan DA - 2003-10-07 PY - 2003 AN - OPUS4-5439 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg T1 - Improvement of materials efficiency for a sustainable resource management T2 - International Conference on Processing and Manufacturing of Advanced Materials CY - Vancouver, Canada DA - 2006-07-04 PY - 2006 AN - OPUS4-12161 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg T1 - Kostensenkung durch Steigerung der Materialeffizienz T2 - Produktintegrierter Umweltschutz CY - Kaiserslautern, Germany DA - 2006-05-09 PY - 2006 AN - OPUS4-12351 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kley, Gerd A1 - Brenneis, Rudolf A1 - Adamczyk, Burkart A1 - Simon, Franz-Georg T1 - Thermochemical treatment - Technologies for recovery and utilisation of materials KW - Thermochemical treatment KW - Materials separation KW - Refractories KW - Stainless steel PY - 2006 SN - 1009-606X VL - 6 IS - 2 SP - 231 EP - 236 CY - Beijing AN - OPUS4-12346 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kley, Gerd A1 - Brenneis, Rudolf A1 - Adamczyk, Burkart A1 - Simon, Franz-Georg A1 - Köcher, Peter T1 - Thermochemical treatment - Technologies for recovery and upvaluation of materials T2 - 7th World Congress on Recovery, Recycling and Re-integration CY - Bejing, China DA - 2006-05-25 KW - Thermochemie KW - Lichtbogenofen KW - Dekontaminierung KW - Recycling KW - Verwertung KW - Ressourcenschutz KW - Silikatprodukte KW - Feuerfest KW - Schlacken PY - 2005 SP - 1 EP - 10(?) PB - Beijing Kexin Printing House CY - Peking AN - OPUS4-11540 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg A1 - Gerstung, Vanessa T1 - Improvement of Materials Efficiency for a Sustainable Resource Management T2 - R `05 - 7th World Congress on Recovery, Recycling and Re-integration CY - Beijing, PR China DA - 2005-09-25 KW - Materials efficiency KW - Resources efficiency KW - Environmental impact PY - 2005 IS - 104 SP - 1(?) EP - 8(?) CY - Peking AN - OPUS4-11145 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg T1 - Rückgewinnung von nicht erneuerbaren Ressourcen aus Abfällen T2 - Umwelttechnik Symposium CY - Moscow, Russia DA - 2006-09-21 PY - 2006 AN - OPUS4-13696 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg T1 - Kostensenkung durch Steigerung der Materialeffizienz T2 - Seminar "Produktionsintegrierter Umweltschutz (PIUS) CY - Kaiserslautern, Deutschland DA - 2006-05-19 KW - Materialeffizienz KW - Globaler Materialverbrauch KW - Förderprogramme PY - 2006 SP - 4 Seiten PB - PIUS CY - Kaiserslautern AN - OPUS4-13732 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg ED - Chandra, T. T1 - Improvement of Materials Efficiency for a Sustainable Resource Management T2 - 5th International Conference on Processing & Manufacturing of Advanced Materials CY - Vancouver, Canada DA - 2006-07-04 KW - Materials efficiency KW - Total materials requirement KW - Waste mining KW - Producing industry PY - 2007 SN - 0-87849-428-6 SN - 0255-5476 N1 - Serientitel: Materials science forum – Series title: Materials science forum VL - 539-543/3 IS - 539/543 SP - 2305 EP - 2310 PB - Trans Tech Publ. CY - Stafa-Zürich AN - OPUS4-14442 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg ED - Landau, K. T1 - Materialeffizienz KW - Materialeffizienz KW - Resourcenproduktivität PY - 2007 SN - 978-3-87247-655-5 SP - 812 EP - 815 PB - Gentner CY - Stuttgart AN - OPUS4-14619 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Franz-Georg A1 - Biermann, Vera T1 - Groundwater remediation using permeable reactive barriers KW - Groundwater remediation KW - Uranium KW - Permeable reactive barriers PY - 2007 SN - 0967-0513 VL - 15 IS - 1 SP - 31 EP - 39 PB - EPP Publ. CY - Richmond AN - OPUS4-14620 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg A1 - Biermann, Vera T1 - Langzeitverhalten von elementarem Eisen und Hydroxylapatit in reaktiven Wänden für die Grundwassersanierung T2 - Internationales Bergbausymposium WISMUT 2007 CY - Gera, Deutschland DA - 2007-09-10 KW - Grundwassersanierung KW - Uran KW - Reaktive Wände KW - Hydroxylapatit PY - 2007 SP - 361 EP - 367 CY - Chemnitz AN - OPUS4-15825 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Simon, Franz-Georg A1 - Eckardt, Jürgen A1 - Christoph, Gabriele T1 - Results of interlaboratory comparisons of column percolation tests N2 - Laboratory leaching tests may be used for source term determination as a basis for risk assessment for soil–groundwater pathway (leachate forecast) on contaminated sites in Germany. Interlaboratory comparisons on the evaluation of the reproducibility of column percolation tests were conducted within the framework of an integrated R + D program using three waste reference materials. The interlaboratory comparisons of column percolation tests showed good reproducibility of the results for inorganic and organic parameters as well as for the accompanying parameters. This is due to the stipulations concerning the time of contact between leachant and sample material as well as the sample placement in the columns. Different column dimensions used by the participants of the interlaboratory comparisons did not have any substantial influence on the column test results. KW - Leachate forecast KW - Column percolation tests KW - Interlaboratory comparisons KW - Contaminated soil KW - Waste material PY - 2007 DO - https://doi.org/10.1016/j.jhazmat.2007.03.039 SN - 0304-3894 VL - 148 IS - 3 SP - 714 EP - 720 PB - Elsevier CY - Amsterdam AN - OPUS4-15754 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Franz-Georg A1 - Berger, Wolfgang A1 - Mantyk, Matthias T1 - Rückgewinnung von Kupfer aus Rostaschen aus der thermischen Abfallbehandlung KW - Flotation KW - Ressourcen KW - Rostasche PY - 2007 SN - 0026-0746 VL - 61 IS - 11 SP - 713 PB - Giesel Verlag GmbH CY - Isernhagen AN - OPUS4-16122 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg T1 - Rohstoffpotenzial von MVA Schlackedeponien T2 - Gemeinschaftstagung von ANS, VKU und DWA Deponietage CY - Neuss, Germany DA - 2011-11-22 PY - 2011 AN - OPUS4-25015 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg A1 - Meggyes, Tamás T1 - Effective cleanup of groundwater contaminated with uranium using permeable reactive barriers T2 - 4th International contaminated site remediation conference - CleanUp 2011 CY - Adelaide, Australia DA - 2011-09-11 KW - Permeable reactive barriers KW - Groundwater remediation KW - Uranium PY - 2011 SN - 978-1-921431-29-6 IS - A 106 SP - 13 EP - 14 AN - OPUS4-25558 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Oliver A1 - Simon, Franz-Georg ED - Stegmann, R. ED - Rettenberger, G. ED - Kuchta, K. ED - Fricke, K. ED - Heyer, K.-U. T1 - Aufschluss, Trennung und Rückgewinnung von ressourcen-relevanten Metallen aus Rückständen thermischer Prozesse T2 - Deponietechnik 2012 - 8. Hamburger Abfallwirtschaftstage CY - Hamburg, Deutschland DA - 2012-01-31 KW - Ressourcen KW - Rostasche KW - Ersatzbaustoff PY - 2012 SN - 978-3-9812867-6-2 N1 - Serientitel: Hamburger Berichte – Series title: Hamburger Berichte VL - 37 SP - 177 EP - 186 PB - Abfall aktuell CY - Stuttgart AN - OPUS4-25880 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg T1 - Abfalldeponien in der Zukunft: Schadstoffsenke oder Rohstoffquelle T2 - 51. Tutzing-Symposium Abfall - Hinterlassenschaft oder Ressourcenreservoir CY - Tutzing, Germany DA - 2012-04-22 PY - 2012 AN - OPUS4-25631 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg T1 - Aufbereitung von Verbrennungsschlacken T2 - 691. Dechema Kolloquium Siedlungsabfall als Rohstoffquelle CY - Frankfurt am Main, Germany DA - 2012-02-09 PY - 2012 AN - OPUS4-25582 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg T1 - Materialeffizienz in Unternehmen T2 - Green Design - Innovationstreiber oder Modeerscheinung CY - Wuppertal, Germany DA - 2012-01-19 PY - 2012 AN - OPUS4-25426 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Holm, Olaf T1 - Aufschluss, Trennung und Rückgewinnung von Metallen aus Rückständen thermischer Prozesse - Verdoppelung der Metallausbeute aus MVA-Rostasche N2 - In den Rückständen thermischer Verfahren sind bedingt durch den Verbrennungsprozess Metalle sowohl in elementarer wie auch in chemisch gebundener Form enthalten. Früher wurde Eisenschrott vor allem deshalb mit Magneten abgetrennt, weil sonst die Verwertung als Baustoff erschwert war. Nichteisen-Metalle, bei Rostasche aus einer Müllverbrennungsanlage (MVA) sind dies hauptsächlich Kupfer und Aluminium, können mit der Wirbelstromtechnik abgetrennt werden. Auf diese Weise sinken auch die Gehalte an umweltrelevanten Schwermetallen. Allerdings werden die kleinen Korngrößen und die chemische gebundenen Metallen (z.B. Oxide oder Carbonate) bisher in der Aufbereitung nicht erfasst. Der Beitrag befasst sich mit den verfahrenstechnischen Potenzialen zur Erhöhung der Metallausbeute. KW - Rostasche KW - Aufbereitung KW - Flotation KW - Dichtesortierung KW - Nichteisenmetalle PY - 2013 SN - 978-3-935317-99-3 SP - 297 EP - 310 PB - TK-Verl. AN - OPUS4-29168 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg ED - Rüppel, U. T1 - Kreislauf von Ressourcen N2 - Die Materialflüsse in Industriegesellschaften sind von enormer Größe. Im Jahr 2008 betrug der direkte Materialeinsatz (direct material input, DMI) (Czichos et al., 2008) in Deutschland 1687 Millionen Tonnen (Daten von destatis, 2010). Dazu gehören Energieträger (Kohle, Öl, Gas), Erze, Baumaterialien, Industrieminerale und Biomasse. Knapp 36 % davon (605 Millionen t) werden importiert. Mit zu berücksichtigen sind bei den Materialflüssen auch die nicht verwerteten Rohstoffentnahmen (z.B. Abraum im Bergbau, Bodenaushub, Bergematerial, Verbleib von Holzabfallen im Wald), die sich für die inländische Rohstoflentnahme auf 2229 Millionen Tonnen beliefen. Die nicht verwerteten Rohstoffentnahmen bei den Importen sind mehr als der Faktor 4 höher (2543 Millionen t) (Buyny et al., 2009). Auf der Outputseite geht von diesen riesigen Mengen der größere Anteil in den Bestand (net addition to stock, 637 Millionen t), der nächst größere Anteil in den Export (388 Mt). Immerhin 256 Millionen Tonnen werden durch dissipative Nutzung in der Umwelt verteilt. Die Bilanz geht auf, wenn man Gase auf der Inputseite und Emissionen in die Atmosphäre auf der Outputseite (Verbrennung von fossilen Rohstoffen zu CO2 und Wasser) berücksichtigt. An diesen Zahlen erkennt man, dass Ressourcen nur in beschränkten Maß im Kreislauf geführt werden, sonst wäre der Zuwachs zum urbanen Lager nicht so groß. T2 - 2. Darmstädter Ingenieurkongress Bau und Umwelt CY - Darmstadt, Germany DA - 12.03.2013 KW - Ressourcen KW - Ressourcenproduktivität KW - Recycling-Baustoffe PY - 2013 SN - 978-3-8440-1747-2 SN - 0945-067X SP - 697 EP - 700 PB - Shaker Verlag GmbH AN - OPUS4-27927 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg T1 - Aufschluss, Trennung und Recycling von ressourcenrelevanten Metallen aus Rückständen thermischer Prozesse mit innovativen Verfahren T2 - Jahrestreffen der Fachgruppe Abfallbehandlung und Wertstoffrückgewinnung CY - Frankfurt am Main, Germany DA - 2013-02-20 PY - 2013 AN - OPUS4-27753 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Meggyes, T. ED - Meyers, R.A. T1 - Sustainable remediation methods for metals and radionuclides N2 - Glossary Biomineralization A process by which living organisms produce minerals. - Chernobyl Ukrainian city site of the largest nuclear power plant accident in history. - Cut-off-wall Underground structure designed to prevent the flow of water. - DART Deep aquifer remediation tool. - Diffusion Movement of ions and molecules from places of higher concentration to places of lower concentration. - Electrochemical remediation Remediation technologies comprising electrochemical transport and transformation methods. - Electrokinetic screens Structures used to prevent radionuclides from diffusing from the polluted area into the environment. - Electromigration Transport of charged ions or ion complexes in solution. - Electroosmosis Movement of liquid relative to a charged stationary surface, - Electrophoresis Movement of charged particles relative to a stationary fluid. - Enhanced electrochemical remediation Use of pH control and additives to improve removal efficiency. - EURT East Urals Radioactive Trail area contaminated due to a nuclear accident. - Natural attenuation (NA) Remediation relying entirely on natural processes. - Permeable reactive barriers Passive in situ treatment zones of reactive material that degrades or immobilizes contaminants as groundwater flows through it. - Phytoremediation Soil remediation using living plants and their associated microorganisms. - Radionuclide or radioisotope An atom with an unstable nucleus whose excess energy is available to be imparted to a newly-created radiation particle within the nucleus or to an atomic electron. - Total material requirement (TMR) Sum of domestic and imported primary natural resources and their hidden flows. KW - Groundwater remediation KW - Radionuclides PY - 2013 SN - 978-1-4419-0852-0 DO - https://doi.org/10.1007/SpringerReference_226449 SP - 1 EP - 36 PB - Springer CY - Berlin Heidelberg AN - OPUS4-28517 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Franz-Georg A1 - Holm, Olaf T1 - Rostasche - Durch Aufschluss, Trennung und Rückgewinnung von Metallen aus Rückständen thermischer Prozesse kann die Metallausbeute erhöht werden N2 - In den Rückständen thermischer Verfahren sind als Folge des Verbrennungsprozesses Metalle sowohl in elementarer wie auch in chemisch gebundener Form enthalten. Früher wurde Eisenschrott vor allem deshalb mit Magneten abgetrennt, weil sonst die Verwertung als Baustoff erschwert war. Nichteisen-Metalle – bei Rostasche aus einer Müllverbrennungsanlage (MVA) sind dies hauptsächlich Kupfer und Aluminium – können mit der Wirbelstromtechnik abgetrennt werden. Auf diese Weise sinken auch die Gehalte an umweltrelevanten Schwermetallen. Allerdings werden die kleinen Korngrößen und die chemisch gebundenen Metallen (etwa Oxide oder Carbonate) bisher in der Aufbereitung nicht erfasst. Im vorliegenden Beitrag werden die verfahrenstechnische Potenziale aufgezeigt, mit denen die Metallausbeute erhöht werden kann. KW - Rostasche KW - Wirbelstromabscheidung KW - Flotation PY - 2013 SN - 1868-9531 VL - 26 IS - 3 SP - 31 EP - 37 PB - Rhombos-Verlag CY - Berlin AN - OPUS4-29321 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Franz-Georg A1 - Holm, Olaf A1 - Berger, Wolfgang T1 - Resource recovery from urban stock, the example of cadmium and tellurium from thin film module recycling N2 - Raw material supply is essential for all industrial activities. The use of secondary raw material gains more importance since ore grade in primary production is decreasing. Meanwhile urban stock contains considerable amounts of various elements. Photovoltaic (PV) generating systems are part of the urban stock and recycling technologies for PV thin film modules with CdTe as semiconductor are needed because cadmium could cause hazardous environmental impact and tellurium is a scarce element where future supply might be constrained. The paper describes a sequence of mechanical processing techniques for end-of-life PV thin film modules consisting of sandblasting and flotation. Separation of the semiconductor material from the glass surface was possible, however, enrichment and yield of valuables in the flotation step were non-satisfying. Nevertheless, recovery of valuable metals from urban stock is a viable method for the extension of the availability of limited natural resources. KW - Flotation KW - Cadmium KW - Tellurium KW - Thin film technology KW - Sand blasting PY - 2013 DO - https://doi.org/10.1016/j.wasman.2012.12.025 SN - 0956-053X VL - 33 IS - 4 SP - 942 EP - 947 PB - Pergamon Press CY - New York, NY AN - OPUS4-29312 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg T1 - Deponien im Jahr 2020 T2 - GVC-Fachausschuss Abfallbehandlung CY - --- DA - 2001-01-01 KW - Abfallbehandlung KW - Deponietechnik PY - 2001 AN - OPUS4-1076 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Meggyes, Tamás A1 - Tünnermeier, Torge ED - Prokop, G. T1 - Evaluation of long-term aspects of passive groundwater remediation techniques N2 - Long-term performance of permeable reactive barriers has been investigated in laboratory experiments using elemental iron and hydroxyapatite as reactive materials and uranium as contaminant. Accelerated testing has been performed by applying elevated pollutant concentration and an increased flow velocity. The spatial distribution of uranium in the test columns has been investigated using a radioactive tracer. The results show that the migration pattern exhibits a linear behaviour. T2 - 1st Image-Train Cluster-Meeting CY - Karlsruhe, Germany DA - 2001-11-07 PY - 2002 UR - http://www.perebar.bam.de/PereOpen/pdfFiles/midterm-Final.pdf SN - 3-85457-631-5 SP - 55-58; 145-150 PB - Federal Environment Agency CY - Wien AN - OPUS4-1354 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Brenneis, Rudolf A1 - Köcher, Peter T1 - Enzymatic production of biodegradable lubricants from waste fat T2 - 6th R '02 ; 6th World Congress on Integrated Resources Management CY - Geneva, Switzerland DA - 2002-02-12 PY - 2002 SN - 3-905555-23-9 SP - 1(?) EP - 7(?) PB - EMPA CY - [Dübendorf] AN - OPUS4-1355 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg T1 - Recycling-orientated product development T2 - International Workshop on Ecomaterials CY - Tokyo, Japan DA - 2002-02-06 PY - 2002 SP - 86 AN - OPUS4-1356 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Meggyes, Tamás A1 - Simon, Franz-Georg A1 - Tünnermeier, Torge A1 - Debreczeni, Á. T1 - Fortschritte in der Bautechnik der reaktiven Wände T2 - 10. Braunschweiger Deponieseminar ; 10. Braunschweiger Deponieseminar Qualitätssicherung und Innovation CY - Braunschweig, Deutschland DA - 2002-03-21 PY - 2002 SN - 3-927610-60-7 N1 - Serientitel: Mitteilung des Instituts für Grundbau und Bodenmechanik - Technische Universität Braunschweig – Series title: Mitteilung des Instituts für Grundbau und Bodenmechanik - Technische Universität Braunschweig IS - 69 SP - 453 EP - 474 PB - Inst. für Grundbau und Bodenmechanik, TU Braunschweig CY - Braunschweig AN - OPUS4-1599 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Meggyes, Tamás A1 - Tünnermeier, Torge ED - Simon, Franz-Georg T1 - Groundwater remediation using active and passive processes T2 - Workshop "In-situ Reactive Barriers versus Pump-and-Treat" CY - Berlin, Germany DA - 2001-10-18 PY - 2002 SN - 0-7277-3121-1 SP - 3 EP - 34 PB - Telford CY - London AN - OPUS4-1841 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Franz-Georg A1 - Vogel, Christian A1 - Kalbe, Ute T1 - Antimony and vanadium in incineration bottom ash – leaching behavior and conclusions for treatment processes N2 - Due to its large mineral fraction, incineration bottom ash (IBA) from municipal solid waste incineration is an interesting raw material that can be used for road construction or to produce secondary building materials. However, leaching chloride, sulfate, and potentially harmful heavy metals may cause problems in using IBA in civil engineering. Investigating leaching behavior is crucial for the assessment of the environmental compatibility of IBA applications. Various test procedures are available for that purpose. In the present study, a long-term leaching test of a wet-mechanically treated IBA was performed in a lysimeter for almost six years. While concentrations of chloride, sulfate and the majority of the heavy metals started to decrease rapidly with progressive liquid-to-solid ratio (L/S), antimony (Sb) and vanadium (V) behaved differently. At the beginning of the lysimeter test, the Sb and V concentrations were low, but after approximately one year of operation at an L/S ratio of around 0.8 L/kg, a steady increase was observed. It was shown that this increase is the result of low Ca concentrations due to the formation of CaCO3. With the data, the solubility products from Ca-antimonate and Ca-vanadate were calculated. The unusual leaching behavior of Sb and V should be kept in mind when considering field scenarios and evaluating the impact on the environment. KW - Bottom ash KW - Lysimeter KW - Leaching of waste materials KW - Secondary building materials PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-534317 DO - https://doi.org/10.31025/2611-4135/2021.15115 SN - 2611-4135 VL - 16 SP - 75 EP - 81 PB - CISA CY - Padua AN - OPUS4-53431 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Franz-Georg A1 - Kalbe, Ute T1 - Measurement of the Environmental Impact of Materials N2 - This Special Issue, ‘Measurement of the Environmental Impact of Materials’, is focused on the impact that materials have on the environmental compartments of soil, water and air. Leaching and emission processes, including underlying mechanisms, are a recurring topic in most published articles in the present Special Issue. Contributions have come from three continents and numerous countries (USA, Germany, France, Latvia, Poland, Russia, Japan, Korea and Thailand) indicating the global dimension of the subject. KW - Leaching KW - Recycling KW - Nano-materials PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-545099 DO - https://doi.org/10.3390/ma15062208 SN - 1996-1944 VL - 15 IS - 6 SP - 1 EP - 3 PB - MDPI CY - Basel AN - OPUS4-54509 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Roesch, Philipp A1 - Vogel, Christian A1 - Wittwer, Philipp A1 - Huthwelker, T. A1 - Borca, C. A1 - Sommerfeld, Thomas A1 - Kluge, Stephanie A1 - Piechotta, Christian A1 - Kalbe, Ute A1 - Simon, Franz-Georg T1 - Taking a Look at the Surface: µ-XRF Mapping and Fluorine K-edge µ-XANES Spectroscopy of Organofluorinated Compounds in Environmental Samples and Consumer Products N2 - For the first time, µ-X-ray fluorescence (µ-XRF) mapping combined with fluorine K-edge µ-X-ray absorption near-edge structure (µ-XANES) spectroscopy was applied to depict per- and polyfluoroalkyl substances (PFAS) contamination and inorganic fluoride in samples concentrations down to 100 µg/kg fluoride. To demonstrate the matrix tolerance of the method, several PFAS contaminated soil and sludge samples as well as selected consumer product samples (textiles, food contact paper and permanent baking sheet) were investigated. µ-XRF mapping allows for a unique element-specific visualisation at the sample surface and enables localisation of fluorine containing compounds to a depth of 1 µm. Manually selected fluorine rich spots were subsequently analysed via fluorine K-edge µ-XANES spectroscopy. To support spectral interpretation with respect to inorganic and organic chemical distribution and compound class determination, linear combination (LC) fitting was applied to all recorded µ-XANES spectra. Complementarily, solvent extracts of all samples were target-analysed via LC-MS/MS spectrometry. The detected PFAS sum values range from 20 to 1136 µg/kg dry weight (dw). All environmentally exposed samples revealed higher concentration of PFAS with a chain length >C8 (e.g. 580 µg/kg dw PFOS for Soil1), whereas the consumer product samples showed a more uniform distribution with regard to chain lengths from C4 to C8. Independent from quantified PFAS amounts via target analysis, µ-XRF mapping combined with µ-XANES spectroscopy was successfully applied to detect both point-specific concentration maxima and evenly distributed surface coatings of fluorinated organic contaminants in the corresponding samples. KW - PFAS KW - XRF KW - LC-MS/MS KW - XANES KW - Fluoride KW - Soil PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-576109 DO - https://doi.org/10.1039/D3EM00107E SN - 2050-7887 SP - 1 EP - 12 PB - Royal Society of Chemistry AN - OPUS4-57610 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Franz-Georg A1 - Kalbe, Ute T1 - Case Study on Secondary Building Materials for a Greener Economy N2 - Half of global material consumption involves mineral material. The circularity is still low so that the enhanced use of secondary building material is required to close loops. Three different secondary building materials are discussed based on exemplary research results: construction and demolition waste (C&D waste), soil-like material, and incineration bottom ash (IBA). Focus was placed on the environmental compatibility of the materials examined mainly by standardized leaching tests. C&D waste was investigated after a wet treatment using a jigging machine, and soil-like material and IBA were characterized with respect to their material composition. Their environmental compatibilities in particular were studied using standard leaching tests (batch tests and column tests). It was concluded that soil-like material can mostly be utilized even when the precautionary limit values set are exceeded by a factor of less than two. For C&D waste, the fine fraction below 2 mm and the content of brick material is problematic. IBA fulfills quality level “HMVA-2” following German regulations. Improved levels of utilization might be achievable with better treatment technologies. KW - Incineration bottom ash KW - Soil-like material KW - Leaching KW - Circular economy PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-576343 DO - https://doi.org/10.3390/app13106010 SN - 2076-3417 VL - 13 IS - 10 SP - 1 EP - 13 PB - MDPI CY - Basel AN - OPUS4-57634 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Vogel, Christian A1 - Roesch, Philipp A1 - Wittwer, Philipp A1 - Sommerfeld, Thomas A1 - Riedel, Maren A1 - Leube, Peter A1 - Kalbe, Ute A1 - Schoknecht, Ute A1 - Simon, Franz-Georg T1 - Per- and Polyfluoroalkyl Substances (PFAS) in Ski Waxes and Snow from Cross-Country Skiing in Germany - Comparative study of Sum Parameter and Target Analysis N2 - Per- and polyfluoroalkyl substances (PFAS) are often environmentally exposed via discharge through human consumer products, such as ski waxes. In our study we analyzed various ski waxes from the 1980s and 2020s, to determine both the sum parameter values total fluorine (TF), extractable organically bound fluorine (EOF), hydrolysable organically bound fluorine (HOF) as well as targeted PFAS analysis. This showed that modern high-performance waxes contain up to 6 % TF, but also PFAS-free labelled ski waxes contain traces of PFAS with EOF/HOF values in the low mg kg-1 range. With the ban of all fluorine-based waxes with the start of the 2023/2024 winter season this will probably change soon. Moreover, we applied our analysis methods to snow samples from a frequently used cross country ski trail (Kammloipe) in the Ore Mountain region in Germany, assessing the potential PFAS entry/discharge through ski waxes. Melted snow samples from different spots were analyzed by the adsorbable organically bound fluorine (AOF) sum parameter and PFAS target analysis and confirmed the abrasion of the ski waxes into the snow. Moreover, on a PFAS hotspot also soil samples were analyzed, which indicate that PFAS from the ski waxes adsorb after snow melting into the soil. KW - Combustion Ion Chromatography KW - Per- and Polyfluoroalkyl substances (PFAS) KW - Consumer Products PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-612760 DO - https://doi.org/10.1016/j.hazadv.2024.100484 VL - 16 SP - 1 EP - 5 PB - Elsevier B.V. AN - OPUS4-61276 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pienkoß, Fabian A1 - Kalbe, Ute A1 - Simon, Franz-Georg T1 - Nassmechanische Aufbereitung von Bauschutt‐Brechsand mit der Setztechnik – ein Schritt auf dem Weg zum Ersatzbaustoff T1 - Wet-Mechanical Processing of Crushed-Sand from Construction-Waste - A First Step Towards a Circular Building Material N2 - Das Recycling von gemischten Baustoffen führt neben der Herstellung von Gesteinskörnungen parallel zu einem stärker schadstoffbelasteten Stoffstrom, der circa ein Drittel der ursprünglichen Masse ausmacht. Dieser sogenannte Brechsand endet derzeit in der Deponierung und wird somit der Kreislaufwirtschaft entzogen. Der vorliegende Beitrag untersucht nun die Aufbereitung dieses Materials unter Verwendung einer Setzmaschine im Pilotmaßstab. Hierbei wird die Eignung dieser Technik evaluiert und das Aufbereitungsprodukt als möglicher Ersatzbaustoff untersucht. N2 - Besides the generation of aggregates, recycling of mixed construction and demolition waste leads to a more polluted side stream accounting for up to one third of the input materials. This so-called crushed sand often ends up in landfills and is hence lost for a circular economy. This article reports about the processing of this material using a pilot plant jig. The suitability of jigging technology is evaluated, and the product is analyzed as possible circular building material. KW - Aufbereitung KW - Ersatzbaustoff KW - Kreislaufwirtschaft KW - Setzmaschine KW - Umweltverträglichkeit PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-585978 DO - https://doi.org/10.1002/cite.202300019 SN - 0009-286X VL - 95 IS - 12 SP - 1916 EP - 1924 PB - Wiley VHC-Verlag AN - OPUS4-58597 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Roesch, Philipp A1 - Schinnen, Andrea A1 - Riedel, Maren A1 - Sommerfeld, Thomas A1 - Sawal, G. A1 - Bandow, N. A1 - Vogel, Christian A1 - Kalbe, Ute A1 - Simon, Franz-Georg T1 - Investigation of pH-dependent extraction methods for PFAS in (fluoropolymer-based) consumer products: A comparative study between targeted and sum parameter analysis N2 - Here, we report a comparative study of different sum parameter analysis methods for the extraction of per- and polyfluoroalkyl substances (PFAS) from manufactured consumer products, which can be measured by combustion ion chromatography (CIC). Therefore, a hydrolysis-based extraction method was further developed, which accounts for the addition of hydrolyzable covalently bound polyfluoroalkylated side-chain polymers (SFPs) to the extractable organic fluorine portion of the mass balance proposed as "hydrolyzable organically bound fluorine" (HOF). To test this hypothesis, the method was applied to 39 different consumer products containing fluoropolymers or monomeric PFAS taken from four different categories: outdoor textiles, paper packaging, carpeting, and permanent baking sheets. We also evaluated the method's efficiency by extracting four synthesized fluorotelomer polyacrylate reference compounds. The total fluorine (TF) and extractable organically bound fluorine (EOF) values were measured through CIC using established protocols. The TF values ranged from sub-ppb to %-levels, depending on the compound class. All samples showed results for hydrolyzed organofluorine (HOF) between 0.03 and 76.3 μg/g, while most EOF values were lower (150 mg kg−1, because of different diffusion properties for various PFAS, but also kinetic exchange limitations. KW - Combustion ion chromatography KW - Per- and polyfluoroalkyl substances (PFAS) KW - Sewage sludge KW - Fertilizer PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-583429 DO - https://doi.org/10.1039/d3va00178d SN - 2754-7000 VL - 2 IS - 10 SP - 1436 EP - 1445 PB - Royal Society of Chemistry (RSC) CY - London AN - OPUS4-58342 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Simon, Franz-Georg T1 - Durchführung von Ringversuchen zur Validierung der Normen E DIN 19528 und E DIN 19529 N2 - Um den Erfordernissen des Grundwasser- und Bodenschutzes zu entsprechen ist die Kenntnis des Elutionsverhaltens von Abfall- und Bodenmaterialien erforderlich, wenn diese z.B. zur Verwertung im Straßen- oder Landschaftsbau vorgesehen sind. Im Zusammenhang mit der Novellierung der Bundes-Bodenschutzverordnung und der Einführung der Ersatzbaustoffverordnung sowie in Auswertung der Ergebnisse des BMBF-Verbundvorhabens „Sickerwasserprognose“ wurden vom DIN-Normenaus-schuss Wasserwesen, Unterausschuss „Eluierungsverfahren“ zwei Verfahren zur Elution von Fest-stoffen erarbeitet, die im Oktober 2007 als Entwürfe veröffentlicht wurden. Dabei handelt es sich um ein Säulenperkolationsverfahren zur gemeinsamen Untersuchung des Elutionsverhaltens von orga-nischen und anorganischen Stoffen (E DIN 19528) und ein Schüttelverfahren mit einem Wasser-/ Feststoff-Verhältnis (W/F) von 2 l/kg zur Untersuchung der Elution von anorganischen Stoffen (E DIN 19529). Beide Verfahren sind für Bodenmaterialien und mineralische Abfälle mit einer Korngröße bis 32 mm vorgesehen. Für Normen die in Verordnungen zitiert werden sollen, ist eine Verfahrensvalidierung erforderlich. Im Rahmen dieses Vorhabens waren die Verfahrenskenndaten auf der Grundlage von Ringversuchen zu ermitteln. Zunächst wurden vier für die Verordnungen relevante Materialien (Hausmüllverbrennungs-asche, Recyclingbaustoff, Bodenmaterial, Stahlwerksschlacke) als Referenzmaterialien (RM) aufberei-tet. Die zu analysierenden Parameter wurden unter Berücksichtigung der Regelungsrelevanz in Abstimmung mit dem Auftraggeber ausgewählt. Die RM wurden gemeinsam mit Referenzlösungen an die 53 Teilnehmer der Ringversuche ausgegeben. Die statistische Auswertung der Ringversuchsergebnisse erfolgte nach DIN 38402-42, wobei der Gesamtmittelwert aller Teilneh-mer als Sollwert herangezogen wurde. Es konnte gezeigt werden, dass akzeptable Reproduzierbarkeiten für organische und anorganische Schadstoffe durch geeignete Vorgaben sowohl für Schütteltests als auch für Säulenversuche erzielt werden können. Dies gilt insbesondere unter Berücksichtigung des breiten Korngrößenspektrums der RM, der relativ hohen zugelassenen Toleranzen für das W/F bei den Säulenversuchen und des kurzen Bekanntheitsgrades der Normenentwürfe. Die ermittelten Verfahrenskenndaten finden Eingang in die abschließende Bearbeitung der Normen. KW - Verwertung KW - Abfallmaterialien KW - kontaminierter Boden KW - Auslaugungsverhalten KW - Eluierungsverfahren KW - Schütteltest KW - Säulenperkolationsversuch KW - Sickerwasserprognose KW - Standardisierung KW - Validierung KW - Ringversuche PY - 2008 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-354756 SP - 1 EP - 275 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-35475 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalbe, Ute A1 - Simon, Franz-Georg T1 - Potential use of incineration bottom ash in construction – Evaluation of the environmental impact N2 - Knowledge of the long-term leaching behavior of potentially harmful substances is crucial for the assessment of the environmental compatibility of reusing municipal solid-waste incineration bottom ash (MSWI BA) in construction, i.e., as a road base layer. BA fractions obtained from wet-processing aiming at the improvement of environmental quality were used to investigate the mobility of relevant substances. Eluates from laboratory-scaled leaching procedures (column percolation and lysimeters) were analyzed to learn about the long-term release of substances. Unsaturated conditions and artificial rainwater (AR) were used in the lysimeter tests to simulate field conditions. In addition, batch test eluates were generated at usual liquid-to-solid ratios (L/S) for compliance testing purposes. A variety of cations and anions was measured in the eluates. The wet treatment reduces the leaching of chloride and particularly sulfate by more than 60%. The release of typical contaminants for the treated MSWI BA such as the heavy metals Cu and Cr was well below 1% in the conducted leaching tests. An increase in the Sb concentration observed in the lysimeter experiments starting at L/S 0.75 L/kg and in the column experiment at L/S 4 L/kg is assumed to be related to decreasing concentrations of Ca and thus to the dissolution of sparingly soluble calcium antimonate. The same leaching mechanism applies with V, but the concentration levels observed are less critical regarding relevant limit values. However, on the long term the behavior of Sb could be problematic for the application of MSWI BA in construction. KW - MSWI bottom ash KW - Leaching KW - Batch tests KW - Lysimeter KW - Antimony PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-508421 DO - https://doi.org/10.1007/s12649-020-01086-2 SN - 1877-2641 VL - 11 IS - 12 SP - 7055 EP - 7065 PB - Springer AN - OPUS4-50842 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg A1 - Kalbe, Ute A1 - Bandow, Nicole T1 - Potential use of incineration bottom ash in construction – Evaluation of environmental impact N2 - The results from a long-term lysimeter experiment with incineration bottom ash irrigated with artificial rain are reported. Whereas chloride concentration dropped significantly, the release of antimony increased during the course of the experiment as a result of aging processes. T2 - 10th International Conference on the Environmental and Technical Implications of Construction with Alternative Materials, WASCON 2018 CY - Tampere, Finland DA - 06.06.2018 KW - Leaching KW - MSWI Bottom Ash KW - Lysimeter KW - Antimony PY - 2018 SN - 978-951-758-631-3 SN - 0356-9403 SP - 108 EP - 110 AN - OPUS4-45416 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Franz-Georg A1 - Kalbe, Ute T1 - Travelling Conference 2018, Impressionen über die Abfallwirtschaft in Südkorea, Vietnam und Australien N2 - Wie Länder mit ihren Abfällen umgehen, hängt nicht nur von der Wirtschaftskraft eines Landes ab. Selbst in einem reichen Land wie Australien werden unbehandelte Abfälle einfach deponiert. Im Rahmen der Travelling Conference, einer vom Bundesministerium für Bildung und Forschung (BMBF) geförderten Vortragsreihe, besuchten Fachleute die Länder Südkorea, Vietnam und Australien, um mit Experten vor Ort Fragestellungen aus der Abfallwirtschaft zu diskutieren. Zu den Schwerpunktthemen zählte die Steigerung der Ressourceneffizienz im Spannungsfeld von ökonomischen und umweltpolitischen Interessen. Eine Frage war beispielsweise die Bewertung der Umweltverträglichkeit von mineralischen Abfällen, wenn diese als Ersatzbaustoffe eingesetzt werden. In diesem Beitrag werden Ähnlichkeiten und Unterschiede bei der Entsorgung von Siedlungsabfällen, beim Recycling und bei der Bewertung der Umweltverträglichkeit der Wiederverwertung von Abfällen in den drei besuchten Ländern im Vergleich zu Deutschland aufgezeigt. Dabei ist man sich in Deutschland und den drei besuchten Ländern einig, dass die Abfallbeseitigung auf Deponien ohne Rückgewinnung von Ressourcen oder Energie die schlechteste Abfallentsorgungsoption ist. Einigkeit besteht auch darin, dass die Ziele einer nachhaltigen Abfallwirtschaft der Schutz der menschlichen Gesundheit und der Umwelt sowie die Schonung von Ressourcen sind. In allen drei Ländern werden große Mengen an mineralischen Abfällen erzeugt, die bei Nachweis der Umweltverträglichkeit einen Teil von natürlichem Sand und Kies für die Bauindustrie ersetzen könnten. Ähnlich wie in Deutschland werden recycelte Abfälle im Tiefbau jedoch nur in geringem Maße eingesetzt. Gründe dafür sind fehlende Behandlungsanlagen für mineralische Abfälle und Bedenken im Hinblick auf die Umweltverträglichkeit. KW - Abfallbehandlung KW - Ersatzbaustoffe KW - Abfalltrennung KW - Deponierung PY - 2018 SN - 1868-9531 VL - 31 IS - 4 SP - 4 EP - 10 PB - Rhombos-Verlag CY - Berlin AN - OPUS4-47124 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lopez Meza, Sarynna A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Simon, Franz-Georg T1 - Harmonization and validation of leaching standards - new developments in Germany N2 - This article presents a snapshot of key issues regarding characterization of granular waste materials with respect to their reuse as alternative construction materials, and the factors that need to be considered in their reutilization in order to comply with soil and groundwater protection regulations. KW - Column tests KW - Granular materials KW - Leaching protocols KW - Standardisation KW - Waste PY - 2008 DO - https://doi.org/10.2462/09670513.890 SN - 0967-0513 VL - 16 IS - 1 SP - 45 EP - 49 PB - EPP Publ. CY - Richmond AN - OPUS4-17376 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Berger, Wolfgang A1 - Kalbe, Ute A1 - Simon, Franz-Georg T1 - Analytik für Ersatzbaustoffe KW - Ersatzbaustoffe KW - Auslaugverfahren KW - Säulentest PY - 2008 SN - 0344-1733 SN - 1610-8256 VL - 32 IS - 9 SP - 26 EP - 28 PB - Vogel CY - Würzburg AN - OPUS4-17978 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Oliver A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Simon, Franz-Georg A1 - López Meza, S. T1 - Leaching experiments on the release of heavy metals and PAH from C&D waste and MSWI bottom ash N2 - Leaching tests are fundamental tools for the assessment of long-term impact of contaminated waste materials on the soil-groundwater pathway. Waste materials should be tested under conditions equal to their actual application in re-use scenarios to achieve reliable results. Since the standards for leaching procedures available on international level so far are either not validated or considered inadequate in respect to coarse grained materials, new standards had to be developed. Therefore column percolation and batch test procedures have been standardized and validated to enable their introduction to new German regulations concerning waste management. Practical aspects of the test procedures as well as the boundary conditions compared to the already existing standards will be described. Examples including round robin test results will be given to justify the selection of the new specifications. T2 - 2nd International conference on hazardous and industrial waste management CY - Chania, Crete, Greece DA - 2010-10-05 KW - Leaching KW - Bioavailability KW - Column tests KW - Batch tests PY - 2010 IS - Session A, A5.1. SP - 1 EP - 8 AN - OPUS4-22128 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute A1 - Krüger, Oliver A1 - Berger, Wolfgang A1 - Simon, Franz-Georg T1 - Source term determination by leaching procedures - new developments in Germany T2 - Global waste management symposium CY - San Antonio, TX, USA DA - 2010-10-03 KW - Elutionsverfahren KW - Abfall PY - 2010 SP - 1 EP - 11(?) AN - OPUS4-22256 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Simon, Franz-Georg T1 - Praktische Aspekte der Anwendung von Eluierungsverfahren nach DIN 19528 und DIN 19529 N2 - Im Zusammenhang mit der Novellierung der Bundes-Bodenschutzverordnung und der Einführung einer Ersatzbaustoffverordnung wurden vom DIN-Normenausschuss Wasserwesen, Unterausschuss "Eluierungsverfahren" zwei Verfahren zur Elution von Feststoffen erarbeitet. Dabei handelt es sich um ein Säulenperkolationsverfahren zur gemeinsamen Untersuchung des Elutionsverhaltens von organischen und anorganischen Stoffen und ein Schüttelverfahren mit einem Wasser-/Feststoff-Verhältnis (W/F) von 2 l/kg zur Untersuchung der Elution von anorganischen Stoffen. Beide Verfahren sind für Bodenmaterialien und mineralische Abfälle mit einer Korngröße bis 32 mm vorgesehen. Der Vergleich der Praktikabilität der beiden Elutionsverfahren soll zur Diskussion zu deren Einsatz im Rahmen der geplanten bundeseinheitlichen gesetzlichen Regelungen beitragen, welche gegenwärtig kontrovers geführt wird. KW - Kontaminierter Boden KW - Abfall KW - Eluierungsverfahren KW - Säulenversuche KW - Schüttelversuche KW - Quellstärkeermittlung KW - Leaching KW - Contaminated soil KW - Mineral waste KW - Column test KW - Batch test KW - Legislation PY - 2009 SN - 0942-3818 SN - 1864-8371 VL - 18 IS - 1 SP - 5 EP - 10 PB - Schmidt CY - Berlin AN - OPUS4-18947 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Simon, Franz-Georg T1 - Results of German ring tests on the vaildation of leaching standards for source term determination T2 - WASCON 2009 - Sustainable management of waste and recycled materials in construction CY - Lyon, France DA - 2009-06-03 KW - Ringversuche KW - Validierung Normen KW - Kontaminierter Boden KW - Abfall KW - Säulenversuche KW - Schüttelversuche PY - 2009 SP - 1 EP - 10(?) AN - OPUS4-19569 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Eckardt, Jürgen A1 - Simon, Franz-Georg T1 - Evaluation of leaching and extraction procedures for soil and waste N2 - Laboratory leaching tests may be used for source term determination as a basis for risk assessment for soil–groundwater pathways on contaminated sites. In order to evaluate different leaching procedures, batch extraction tests and percolation tests were performed using three reference materials produced from contaminated soil, demolition waste and municipal solid waste incinerator bottom ash. Emphasis was placed on the investigation of the leachability of the heavy metals copper and chromium, polycyclic aromatic hydrocarbons (PAHs) and the anions chloride and sulfate. Significant discrepancies between column experiments and batch/extraction tests were found for the release of PAHs and to a lesser extent for the heavy metals Cu and Cr. Additionally interlaboratory comparisons were conducted based on different leaching tests with the reference materials and evaluated using the criteria of comparability and reproducibility. The best reproducibility was achieved for all investigated substances in column tests. The reproducibility of batch tests was acceptable except for PAHs. The results from the experimental work will help establish standardized and feasible laboratory procedures as fundamental for substance specific risk assessment of contaminated sites. KW - Leaching procedures KW - Leachate prognosis KW - Source term determination KW - Risk assessment KW - Contaminated soil KW - Waste materials PY - 2008 DO - https://doi.org/10.1016/j.wasman.2007.03.008 SN - 0956-053X VL - 28 IS - 6 SP - 1027 EP - 1038 PB - Pergamon Press CY - New York, NY AN - OPUS4-17191 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Kalbe, Ute A1 - Berger, Wolfgang ED - Milind V. Khire, ED - Alshawabkeh, Akram N. ED - Krishna R. Reddy, T1 - Waste characterization by leaching and extraction procedures KW - Leaching KW - Heavy metal release KW - Bottom ash PY - 2008 SN - 978-0-7844-0970-1 VL - 177 IS - Geotechnical Special Publication SP - 676 EP - 683 AN - OPUS4-17217 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalbe, Ute A1 - Bandow, Nicole A1 - Holm, Olaf A1 - Simon, Franz-Georg T1 - Elutionsverhalten der Produkte eines alternativen Verfahrens zur Aufbereitung von HMVA N2 - Im Rahmen eines ZIM-geförderten Projektes wurde eine nass-mechanische Aufbereitung von Hausmüllverbrennungsasche (HMVA) hinsichtlich der Mengen und der Qualitäten generierter Fraktionen optimiert. Dabei standen besonders die Qualitäten der mineralischen Fraktionen, die mengenmäßig den größten Anteil darstellen, im Vordergrund, da sie für einen möglichen Einsatz als Baustoff nutzbar gemacht werden sollen. Insbesondere die Chlorid- und Sulfatgehalte sollten dafür reduziert werden. Durch die BAM wurde im Projekt u. a. die Freisetzung von umweltrelevanten Stoffen in den mineralischen Fraktionen untersucht. Dafür wurden Schütteleluate als Übereinstimmungstest und Eluate aus Lysimeterversuchen im Labormaßstab zur Bewertung des Langzeitverhaltens auf ihre Inhaltsstoffe analysiert. KW - Elutionsverhalten KW - HMVA KW - Ersatzbaustoff KW - Lysimeter PY - 2016 SN - 0039-2162 VL - 67 IS - 8 SP - 619 EP - 623 PB - Kirschbaum Verlag CY - Bonn AN - OPUS4-37213 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holm, Olaf A1 - Bandow, Nicole A1 - Kalbe, Ute A1 - Simon, Franz-Georg T1 - Innovative treatment trains of bottom ash (BA) from municipal solid waste incineration (MSWI) in Germany N2 - The industrial sector of bottom ash (BA) treatment from municipal solid waste incineration (MSWI) in Germany is currently changing. In order to increase the recovery rates of metals or to achieve a higher quality of mineral aggregates derived from BA, new procedures have been either implemented to existing plants or completely new treatment plants have been built recently. Three treatment trains, which are designated as entire sequences of selected processing techniques of BA, are introduced and compared. One treatment train is mainly characterized by usage of a high speed rotation accelerator whereas another is operating completely without crushing. In the third treatment train the BA is processed wet directly after incineration. The consequences for recovered metal fractions and the constitution of remaining mineral aggregates are discussed in the context of legislative and economical frameworks. Today the recycling or disposal options of mineral residues still have a high influence on the configuration and the operation mode of the treatment trains of BA despite of the high value of recovered metals. T2 - Sardinia 2015 - 15th International waste management and landfill symposium CY - S. Margherita di Pula, Cagliari, Italy DA - 05.10.2015 KW - MSWI KW - Bottom ash KW - Treatment train KW - High velocity impact crushing KW - Wet treatment KW - Recovery rates KW - Non-ferrous metals KW - Mineral aggragates KW - Recycling KW - Secondary construction material PY - 2015 SP - 1 EP - 11 AN - OPUS4-34936 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krüger, Oliver A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Simon, Franz-Georg A1 - Lopez Meza, Sarynna T1 - Leaching experiments on the release of heavy metals and PAH from soil and waste materials N2 - Leaching tests are fundamental tools for the assessment of long-term impact of contaminated waste materials on the soil-groundwater pathway. Experiments were carried out in the framework of standardization and validation of column percolation and batch test procedures, in particular concerning the stipulation of the experimental setup. The colloid release of column and batch experiments was compared and the influence of different column filling heights (12.5–50 cm) on the release of polycyclic aromatic hydrocarbons (PAH) from soil was studied, as well as the effect of varying contact times (2.5–16 h) on the release of chromium from construction and demolition (C&D) waste and municipal solid waste incineration (MSWI) bottom ash. The results indicate that filtration of the eluate, which is required for batch tests, does not always allow the simulation of the actual colloid amount in soil pore water. Medium column heights four times the inner diameter of the column seemed to provide reasonable equilibrium adjustment conditions and avoid major biodegradation. The release of chromium was only marginally affected by the contact time, varied between 0.115 and 0.150 mg/kg for demolition waste eluate at a liquid-to-solid ratio of approximately 5 L/kg. KW - Column tests KW - Batch tests KW - Waste materials KW - Leaching KW - Standardization PY - 2012 DO - https://doi.org/10.1016/j.jhazmat.2011.02.016 SN - 0304-3894 VL - 207-208 SP - 51 EP - 55 PB - Elsevier CY - Amsterdam AN - OPUS4-24030 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lopez Meza, Sarynna A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Simon, Franz-Georg T1 - Effect of contact time on the release of contaminants from granular waste materials during column leaching experiments N2 - When reusing or disposing of contaminated granular waste materials there is a need to evaluate how the contaminants will interact on the pathway soil-groundwater and the effect this interaction will have on the surrounding environment. While column testing can provide a closer approximation to field percolation conditions than batch testing, there is still a need to develop column testing procedures that consider the requirements of practical testing time frames. This study evaluates the effect of different column contact times (2.5, 5, and 16 h) on the release of inorganic constituents from bottom ash and demolition waste, two commonly reused granular materials. Leaching data for representative constituents of concern, such as copper, chromium, sulfate and chloride, as well as pH and electrical conductivity was compared for all different contact times studied. Results for the materials investigated in this study showed that variations in contact time have no significant effect on the release of the selected constituents and leaching parameters at low liquid to solid ratios. However, after a liquid to solid ratio of 1 L/kg, the effect is more noticeable, and higher contact times show lower pH values as well as a reduction in the release of constituents of concern from bottom ash. In the case of demolition waste, the variation of contact time did not have a strong effect on the leaching behavior. KW - Leaching procedures KW - Standardisation KW - Column tests KW - Contact time KW - Granular materials KW - Waste PY - 2010 DO - https://doi.org/10.1016/j.wasman.2009.11.022 SN - 0956-053X VL - 30 IS - 4 SP - 565 EP - 571 PB - Pergamon Press CY - New York, NY AN - OPUS4-20934 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute A1 - Vogel, Christian A1 - Simon, Franz-Georg T1 - Antimony in incineration bottom ash – Leaching behavior and conclusions for treatment processes N2 - Antimony (Sb) is used in industrial products mainly as flame retardant in plastic material. Due to such additives in plastics, about a half of Sb ends up in municipal solid waste incineration at the end-of-life and consequently in relevant amounts in the generated bottom ash. In contact with water, the initial leachability is low, as antimonates form sparingly soluble compounds with Ca2+. Following the carbonation of the incineration bottom ash (IBA) during the proceeding ageing the pH in the leachates decreases. With decreasing concentration of Ca in the eluate the solution equilibrium changes and antimonates dissolve. In Germany it is intended to regulate Sb in IBA with the planned implementation of the so called Mantelverordnung (MantelVO, containing provisions on the utilisation of mineral waste) in the near future. The limit values set in the draft might be critical for IBA and therefore pose a risk for the utilisation of the mineral fraction of IBA in the well-established recycling routes. T2 - SUM 2020 – 5th Symposium on Urban Mining and Circular Economy CY - Online meeting DA - 18.11.2020 KW - Bottom ash KW - Leaching KW - Antimony PY - 2020 SP - 1 EP - 4 AN - OPUS4-51622 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Roesch, Philipp A1 - Vogel, Christian A1 - Kalbe, Ute A1 - Simon, Franz-Georg T1 - Entwicklung von PFAS-Summenparametern mittels Combustion Ion Chroma- tography (CIC) N2 - Wie können industriell synthetisierte Schadstoffe aus einer Stoffklasse quantifiziert werden, deren genauer Umfang unbekannt ist und auf mehrere tausend Verbindungen geschätzt wird? Im Falle der per- und polyfluorierten alkylierten Substanzen (PFAS) stellen sich Wissenschaftler*innen weltweit seit über zehn Jahren diese Frage. Neben der etablierten Methodik der Einzelstoffanalytik (engl. target analytic) existieren Summenparameteranalysen zur Quantifizierung organisch gebundener fluorierter Verbindungen in Umweltmedien und Konsumprodukten. An der Bundesanstalt für Materialforschung und -prüfung (BAM) beschäftigen wir uns mit der Weiterentwicklung von Summenparametermethoden am Beispiel von PFAS-belasteten Umweltkompartimenten wie Böden, Klärschlämmen und Gewässerproben sowie PFAS-haltigen Konsumgütern. In diesem Beitrag stellen wir zwei ausgewählte Fallbeispiele vor und diskutieren die Vor- und Nachteile der Methoden im Vergleich zur Einzelstoffanalytik. KW - PFAS KW - Combustion Ion Chromatography KW - LC-MS/MS KW - Water analysis KW - Environmental analysis KW - Sum parameter analysis PY - 2023 SN - 1618-3258 VL - 29 IS - 2 SP - 40 EP - 44 AN - OPUS4-57611 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Franz-Georg A1 - Müller, Werner T1 - Standard and alternative landfill capping design in Germany N2 - Engineered capping systems are in most cases an indispensable and often the only efficient component required by the long-term safety concept for landfills, mine tailings tips and contaminated land. In Germany the composite liner is the main component of standard landfill cappings for municipal and hazardous waste landfills and the compacted clay liner (CCL) for landfills for inert or low-contamination waste. The composite liner is a technically highly effective but very expensive system. Research and experience has given rise to concern about the proper long-term performance of a conventional single CCL as a landfill capping. Therefore, alternative capping systems are discussed and applied for landfills and for the containment of contaminated sites. This paper gives an overview on various alternative engineered cappings and suitable systems for capping reflecting the state of the art and the expert view in Germany. According to the European Council Directive on the landfill of waste an impermeable mineral layer is recommended for the surface sealing of non-hazardous landfills and a composition of artificial sealing liner and impermeable mineral layer for hazardous landfills. In both cases a drainage layer thickness of at least 0.5 m is suggested. These recommendations should be interpreted flexibly and to some extent modified in the light of the experience and results presented in this paper. KW - Landfills KW - Capping system KW - Durability KW - Permeability PY - 2004 DO - https://doi.org/10.1016/j.envsci.2004.04.002 SN - 1462-9011 VL - 7 IS - 4 SP - 277 EP - 290 PB - Elsevier Science CY - Exeter AN - OPUS4-3742 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Czichos, Horst A1 - Skrotzki, Birgit A1 - Simon, Franz-Georg ED - Czichos, Horst ED - Hennecke, Manfred T1 - Werkstoffe PY - 2008 SN - 978-3-540-71851-2 SP - D1 EP - D31 PB - Springer CY - Berlin ET - 33. aktualisierte Auflage AN - OPUS4-16180 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - BOOK A1 - Czichos, Horst A1 - Skrotzki, Birgit A1 - Simon, Franz-Georg T1 - Das Ingenieurwissen: Werkstoffe KW - Werkstoffe KW - Materialprüfung KW - Werkstoffkennwerte PY - 2014 DO - https://doi.org/10.1007/978-3-642-41126-7 SP - 1 EP - 110 PB - Springer-Vieweg CY - Berlin Heidelberg AN - OPUS4-29654 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wittwer, Philipp A1 - Roesch, Philipp A1 - Vogel, Christian A1 - Simon, Fabian A1 - Gehrenkemper, Lennart A1 - Feldmann, Ines A1 - Simon, Franz-Georg T1 - Less Is More: Influence of Cross-Linking Agent Concentration on PFOS Adsorption in Chitosan N2 - As a result of the continuous use of persistent per- and polyfluoroalkyl substances (PFAS), e.g., in aviation firefighting foams, contamination with PFAS has been found in soil, groundwater, and surface water around thousands of industrial and military installations. Due to their harmful (environmental) potential, further dispersion in the environment needs to be stopped, which can be achieved by appropriate absorption materials. In this work, the influence of the cross-linking agent epichlorohydrin (ECH) concentration on the perfluorooctanesulfonic acid (PFOS) adsorption capacity of chitosan gel was investigated. It was found that higher ECH concentration during the cross-linking step decreases the PFOS adsorption capacity of the cross-linked chitosan gel from 0% to 4% ECH solution by about 15%. Using a concentration of 1%, ECH resulted still in an acid-stable material, and a maximum PFOS loading capacity of 4.04 mmol/g was obtained, one of the highest described in the literature. Furthermore, we used a rapid small-scale column test to compare the PFOS adsorption capacity of chitosan and activated carbon, each in both milled and unmilled form. Unmilled chitosan showed the highest PFOS adsorption capacity considering adsorption material dry masses (>0.9 and <0.4 mmol/g for both types of chitosan and activated carbon, respectively). Milled activated carbon proved to be the better adsorption material, considering the fixed volume of the adsorber (>99.9% PFOS adsorbed). Overall, the cross-linking agent concentration in chitosan is a crucial factor influencing its PFOS absorption potential. Our results feature cross-linked chitosan as an effective economic and ecologic alternative for PFOS adsorption in aqueous solutions. KW - Combustion Ion Chromatography KW - Per- and Polyfluoroalkyl substances (PFAS) KW - Remediation PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-618406 DO - https://doi.org/10.3390/app142311145 VL - 14 IS - 23 SP - 1 EP - 13 PB - MDPI AN - OPUS4-61840 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bandow, Nicole A1 - Simon, Franz-Georg T1 - Significance of cadmium from artists' paints to agricultural soils and the food chain N2 - Background: An Annex XV restriction dossier for cadmium in artists’ paints was submitted by an EU member state to the European Chemicals Agency ECHA. By cleaning used brushes under the tap cadmium can enter the food chain via waste water treatment and subsequent agricultural application of the sewage sludge. It was estimated that 110 kg Cd per year is spread on agricultural land via this exposure route. Other sources of Cd amount to almost 120 tons per year. Results: The mobility of Cd from pigments was studied in a field-like scenario by leaching experiments using soil samples amended with sewage sludge and spiked with Cd pigments in percolation columns. The redox conditions were confirmed to be the decisive factor for the release of Cd. The release of Cd from artists’ paints was in most cases 1% or lower in the experiments performed. Conclusions: Application of sewage sludge containing Cd from artist paints does not increase the amount of Cd leached from this soils. Furthermore the quantity of Cd from artists’ paints calculated in the restriction dossier is negligible compared to other sources of Cd to agricultural soil. Therefore ECHA did not consider the proposed restriction to be the most appropriate EU wide measure to address the negligible level of risk. KW - REACH regulation KW - Sewage sludge KW - Fertilizer KW - Leaching test PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-358261 DO - https://doi.org/10.1186/s12302-016-0077-6 SN - 2190-4715 VL - 28 IS - 12 SP - 1 EP - 10 AN - OPUS4-35826 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weimann, Karin A1 - Giese, Lutz A1 - Mellmann, Günter A1 - Simon, Franz-Georg T1 - Building materials from waste N2 - In Germany, about 60 million tons of demolition waste are generated annually. Approximately 70% of the demolition waste is currently recycled. Most recycling applications, for example in roadbed substructures, can be seen as a kind of downcycling. However, there are also some high-level applications for demolition waste. For instance, crushed and sieved concrete demolition waste can be used as concrete aggregate instead of natural materials. Depending on the crushing process, about a third of the broken concrete is currently concrete sand. At present, concrete sand fraction (0-4 mm) is rarely reused as a concrete aggregate. This is due to the fact that some important characteristics of crushed concrete sand are different from those of natural sand. As a result, it does not reach the standards required for aggregates. Concrete containing such aggregate is of lower quality than concrete made of natural aggregate. This paper describes an experimental investigation on the treatment of concrete sand gained from demolition waste by wet processing using a jig whereby the sand is separated by grain size and, more importantly, by density. Concrete produced with concrete sand which has been treated in this manner should have the same quality as concrete prepared with natural aggregate. Recycled sand used as aggregate substitutes natural resources and avoids disposal of waste. It has all the characteristics of an Ecomaterial. (author abst.) KW - Demolition waste KW - Jig KW - Wet treatment KW - Ecomaterial KW - Recycled aggregates KW - Material properties PY - 2003 DO - https://doi.org/10.2320/matertrans.44.1255 SN - 1345-9678 SN - 1347-5320 VL - 44 IS - 7 SP - 1255 EP - 1258 PB - Japan Institute of Metals CY - Sendai AN - OPUS4-2803 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 8. Nachtrag zum Zulassungsschein 12/BAM IV.3/09/00 für eine Schutzschicht bestehend aus einer sandgefüllten Schutzbahn für Kunststoffdichtungsbahnen in Deponieabdichtungen N2 - 8. Nachtrag zum Zulassungsschein 12/BAM IV.3/09/00 für eine Schutzschicht bestehend aus einer sandgefüllten Schutzbahn für Kunststoffdichtungsbahnen in Deponieabdichtungen der Fa. G quadrat GmbH, Krefeld. KW - Zulassung KW - Deponie KW - Schutzschicht KW - Kunststoffdichtungsbahn PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-604877 SP - 1 EP - 29 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60487 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 6. Nachtrag zum Zulassungsschein 08/BAM 4.3/02/14 für ein Kunststoff-Dränelement für Deponieoberflächenabdichtungen N2 - 6. Nachtrag zum Zulassungsschein für ein Kunststoff-Dränelement für Deponieoberflächenabdichtungen der Fa. Naue GmbH & Co. KG. KW - Deponie KW - Zulassung KW - Kunststoff-Dränelement PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601339 SP - 1 EP - 27 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60133 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 3. Nachtrag zum Zulassungsschein 08/BAM IV.3/04/04 für eine geotextile Schutzlage als Bestandteil einer Schutzschicht aus geosynthetischer Schutzlage und feinkiesiger mineralischer Schutzlage für Dichtungsbahnen in Deponieabdichtungen N2 - 3. Nachtrag zum Zulassungsschein für eine geotextile Schutzlage als Bestandteil einer Schutzschicht aus geosynthetischer Schutzlage und feinkiesiger mineralischer Schutzlage für Dichtungsbahnen in Deponieabdichtungen der Fa. HUESKER Synthetic GmbH, Gescher. KW - Deponie KW - Zulassung KW - Schutzschicht PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601315 SP - 1 EP - 21 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60131 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 6. Nachtrag zum Zulassungsschein 08/BAM IV.3/08/10 für Vliesstoffe zum Filtern und Trennen für Deponieabdichtungen N2 - 6. Nachtrag zum Zulassungsschein für Vliesstoffe zum Filtern und Trennen für Deponieabdichtungen der Fa. Naue GmbH & Co. KG, Espelkamp. KW - Deponie KW - Zulassung KW - Geotextilien PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601324 SP - 1 EP - 19 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60132 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 11. Nachtrag zum Zulassungsschein 08/BAM 8.3/10/94 für eine Vliesstoffmatte als Bestandteil einer Schutzschicht aus geosynthetischer Schutzlage und feinkiesiger mineralischer Schutzlage für Dichtungsbahnen in Deponieabdichtungen N2 - 11. Nachtrag zum Zulassungsschein für eine Vliesstoffmatte als Bestandteil einer Schutzschicht aus geosynthetischer Schutzlage und feinkiesiger mineralischer Schutzlage für Dichtungsbahnen in Deponieabdichtungen der Fa. Naue GmbH & Co. KG. KW - Deponie KW - Zulassung KW - Schutzschicht PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601343 SP - 1 EP - 20 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60134 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 3. Nachtrag zum Zulassungsschein 08/BAM IV.3/10/10 für Vliesstoffe zum Filtern und Trennen für Deponieabdichtungen N2 - 3. Nachtrag zum Zulassungsschein für Vliesstoffe zum Filtern und Trennen für Deponieabdichtungen der Fa. HUESKER Synthetic GmbH, Gescher. KW - Deponie KW - Zulassung KW - Geotextilien PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601307 SP - 1 EP - 25 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60130 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 3. Nachtrag zum Zulassungsschein 06/BAM IV.3/03/07 für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien N2 - 3. Nachtrag zum Zulassungsschein für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien der Fa. AGRU Kunststofftechnik GmbH, Bad Hall, Österreich. KW - Deponie KW - Zulassung KW - Kunststoffdichtungsbahn PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601285 SP - 1 EP - 9 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60128 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 3. Nachtrag zum Zulassungsschein 06/BAM IV.3/04/99 für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien N2 - 3. Nachtrag zum Zulassungsschein für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien der Fa. AGRU Kunststofftechnik GmbH, Bad Hall, Österreich. KW - Deponie KW - Zulassung KW - Kunststoffdichtungsbahn PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601298 SP - 1 EP - 6 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60129 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 1. Nachtrag zum Zulassungsschein 06/BAM 4.3/01/19 für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien N2 - 1. Nachtrag zum Zulassungsschein für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien der Fa. AGRU Kunststofftechnik GmbH, Bad Hall, Österreich. KW - Deponie KW - Zulassung KW - Kunststoffdichtungsbahn PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601159 SP - 1 EP - 6 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60115 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg A1 - Kalbe, Ute A1 - Adam, Christian A1 - Adamczyk, Burkart A1 - Weimann, Karin T1 - Recovery of non-renewable resources from waste T2 - 7th International Conference on EcoBalance CY - Tsukuba, Japan DA - 2006-11-14 KW - Natural resources KW - Thermo-chemical treatment KW - Waste management KW - Sewage sludge KW - Aggregetes PY - 2006 IS - E2-4 SP - 499 EP - 502 PB - The Society of Non-Traditional Technology CY - Tsukuba, Japan AN - OPUS4-14115 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg T1 - Verwertungsoptionen für Verbrennungsrückstände biogenen Ursprungs T2 - Biogener Abfall - ein heimischer Energieträger mit Zukunft, Internationales Symposium CY - Tulln an der Donau, Austria DA - 2009-05-13 PY - 2009 AN - OPUS4-19385 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kley, Gerd A1 - Adam, Christian A1 - Brenneis, Rudolf A1 - Simon, Franz-Georg T1 - Thermochemische Aufbereitung von Klärschlammaschen zu Phosphordüngern - Das EU-Projekt SUSAN T2 - 75. Darmstädter Seminar "Abwassertechnik" CY - Darmstadt, Deutschland DA - 2005-11-12 KW - Phosphor KW - Ressourcenschutz KW - Thermochemische Behandlung KW - Chlorierung KW - Düngemittel KW - Stofftrennung KW - Klärschlamm KW - Mono-Verbrennung PY - 2005 SN - 3-932518-63-2 N1 - Serientitel: Schriftenreihe WAR – Series title: Schriftenreihe WAR IS - 167 SP - 265 EP - 285 PB - Inst. WAR CY - Darmstadt AN - OPUS4-11683 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Adam, Christian A1 - Kley, Gerd A1 - Simon, Franz-Georg A1 - Lehmann, Annekatrin T1 - Recovery of nutrients from sewage sludge - Results of the European research-project SUSAN N2 - Municipal sewage sludge is a carrier of nutrients – most important phosphorus (P) – but also contains organic pollutants and heavy metals. A two steps thermal treatment based on 1. mono-incineration of sewage sludge under destruction of organic pollutants and 2. thermochemical treatment of the resulting ashes to remove heavy metals and increase P-bioavailability is suggested by the authors. The process aims at P-fertilisers production from sewage sludge. Seven sewage sludge ashes of different origin and composition and one residue from gasification of sewage sludge were thermochemically treated. The raw ashes were mixed with a chlorine donor (e.g. MgCl2) and thermally treated in a gas tight lab-scale rotary furnace. The distributions of the heavy metals between solid and gas phase were determined. The heavy metals concentrations of the treated ashes matched the legislative limits in most cases. The products from thermochemical treatment are suited raw materials for P-fertiliser production. Relevant process parameters such as temperature, type and concentration of Cl-donor and retention time were optimised for the thermochemical treatment step. KW - Phosphorus recovery KW - Sewage sludge ash KW - Thermochemical treatment KW - Fetiliser PY - 2008 DO - https://doi.org/10.2166/wpt.2008.001 SN - 1751-231X VL - 3 IS - 1 SP - 1 EP - 8 PB - IWA Publishing AN - OPUS4-17700 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Wöhlecke, Andreas A1 - Simon, Franz-Georg A1 - Biedermann, K. A1 - Bräcker, W. A1 - Engelmann, B. A1 - Zanzinger, H. T1 - Sind BAM-Zulassung und CE-Kennzeichnung im Wesentlichen gleichwertig? - Der Nachweis des Standes der Technik gemäß Deponieverordnung für Geotextilien und geotextilverwandte Produkte, Teil 2 N2 - Im ersten Teil dieses Aufsatzes wurde gezeigt, dass nur ein Teil der für den Deponiebau wesentlichen technischen Eigenschaften in den europäisch harmonisierten Bauproduktnormen DIN EN 13252 und DIN EN 13257, die der CE-Kennzeichnung der Geotextilien (GTX) und geotextilverwandten Produkte (GTP) zugrunde liegen, erfasst werden. Um eine im Wesentlichen vorhandene Gleichwertigkeit der Produkteigenschaften überhaupt abwägen zu können, müssen aber sämtliche relevanten Eigenschaften bekannt sein. Dies erfordert für CE-gekennzeichnete Produkte zusätzliche Prüfungen auf der Grundlage der DepV-Liste der Kriterien und Einwirkmechanismen (Anhang 1, Nummer 2.1.1, DepV). In diesem Teil werden die Tabellen C1 und C2 sowie die Tabelle D aus dem ersten Teil, in denen die Eigenschaften der harmonisierten europäischen Normen (hEN) den Anforderungen der DepV gegenübergestellt wurden, in technischer Hinsicht näher erläutert. N2 - A comparison of the harmonized technical specifications (in our case the harmonized European standards (hEN), namely DIN EN 13252 and DIN EN 13257), on which the CE-marking of geotextiles and geotextile-related products is based, with the German landfill ordinance (DepV) shows that only a few of the essential technical characteristics actually relevant for landfill constructions are considered in these standards. To be able to ponder about the equivalency of products with respect to their properties, all relevant properties have to be known. Therefore, additional tests based on the DepV-list of criteria and mechanisms of action (Annex 1, no. 2.1.1) are necessary for CE-marked products. This was discussed in the first part of this article. In this part, the tables C1, C2 and D of the first part, which listed and compared the requirements of the hEN and the DepV, are discussed in more technical details. KW - Deponieverordnung KW - BAM-Zulassung KW - Geokunststoffe KW - CE-Kennzeichnung PY - 2015 SN - 0027-2957 SN - 1863-9763 VL - 47 IS - 1 SP - 36 EP - 41 PB - Erich Schmidt CY - Berlin AN - OPUS4-32694 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Adam, Christian A1 - Peplinski, Burkhard A1 - Kley, Gerd A1 - Simon, Franz-Georg ED - Hilty, L. M. T1 - Thermo-chemical treatment of sewage sludge ashes aiming at marketable P-fertiliser products T2 - R'07 World Congress "Recovery of Materials and Energy for Resource Efficiency" CY - Davos, Switzerland DA - 2007-09-03 KW - P-recovery KW - Sewage sludge KW - Thermo-chemical treatment KW - Mineral phases KW - XRD PY - 2007 SN - 978-3-905594-49-2 SP - 14/1 EP - 14/7 PB - EMPA CY - Davos AN - OPUS4-16469 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg T1 - Recovery of non-renewable resources from waste T2 - 9th International Conference on Advanced Materials CY - Singapore DA - 2005-07-03 PY - 2005 AN - OPUS4-7375 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Adam, Christian A1 - Kley, Gerd A1 - Simon, Franz-Georg A1 - Lehmann, Annekatrin ED - Filibeli, A. ED - F. Dilek Sanin, ED - Ayol, A. ED - Selim L. Sanin, T1 - Recovery of nutrients from sewage sludge - Results of the European research-project SUSAN T2 - IWA-Specialist Conference "Facing Sludge Diversities: Challenges, Risks and Opportunities" CY - Antalya, Turkey DA - 2007-03-28 KW - Phosphorus recovery KW - Sewage sludge ash KW - Thermo-chemical treatment KW - Fertiliser PY - 2007 N1 - Serientitel: Journal of environmental science and health : Part A, Toxic/hazardous substances & environmental engineering – Series title: Journal of environmental science and health : Part A, Toxic/hazardous substances & environmental engineering IS - 43.2008,13 SP - 297 EP - 305 PB - Taylor & Francis CY - Philadalphia, PA AN - OPUS4-16468 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Adam, Christian A1 - Kley, Gerd A1 - Simon, Franz-Georg T1 - Thermal treatment of municipal sewage sludge aiming at marketable P-fertilisers N2 - Municipal sewage sludge is a carrier of nutrients – most important phosphorus (P) – but also contains organic pollutants and heavy metals. A two steps thermal treatment is suggested based on 1. mono-incineration of sewage sludge under destruction of organic pollutants and 2. thermochemical treatment of the resulting ashes to remove heavy metals and increase P-bioavailability. The targeted products are marketable P-fertilisers. The thermochemical treatment was investigated in a gas tight lab-scale rotary furnace. Seven sewage sludge ashes of different origin and composition and one residue from gasification of sewage sludge were mixed with a chlorine donor (e.g. MgCl2) and thermochemically treated under systematic variation of operational parameters. The distributions of the heavy metals between solid and gas phase were determined. The heavy metals concentrations of the treated ashes met the legislative limits in most cases. The products from thermochemical treatment are suited raw materials for P-fertiliser production. Relevant process parameters such as temperature, type and concentration of Cl-donor and retention time were optimised for the thermochemical treatment step. KW - Sewage sludge KW - Mono-incineration KW - Ash treatment KW - Thermochemical treatment KW - Phosphorus-fertiliser PY - 2007 SN - 1345-9678 SN - 1347-5320 VL - 48 IS - 12 SP - 3056 EP - 3061 PB - Japan Institute of Metals CY - Sendai AN - OPUS4-16647 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Franz-Georg A1 - Adam, Christian T1 - Ressourcen aus Abfall T1 - Resources from waste N2 - Die Beseitigung unbehandelter Abfälle auf Deponien gehört der Vergangenheit an, nicht nur weil Verordnungen diese Praxis verbieten, sondern auch, weil wegen steigender Preise für Rohstoffe und sinkender Gehalte in Erzen auch in Abfällen nach Alternativen gesucht wird. In den Aschen aus Hausmüllverbrennungsanlagen können mit einfachen Verfahren Metalle zurückgewonnen werden. Mit dem Phosphor aus Klärschlammaschen können Düngemittel hergestellt und so natürliche Ressourcen geschont werden. In beiden Fällen ist die Anreicherung der Wertstoffe durch den Verbrennungsprozess vorteilhaft, da die Effizienz von Recyclingprozessen stark von der Konzentration im Ausgangsgut abhängig ist. N2 - Disposal of untreated waste has come to end due to new legislation in this field. Furthermore as a response to increasing prices for primary raw materials and decreasing ore concentrations products from waste treatment display a source for secondary raw materials. Elemental metals can be easily separated from municipal solid waste incineration bottom ash. Fertilizers can be produced using phosphate from sewage sludge ashes thus preserving natural resources. In both cases the enrichment taking place in the incineration process facilitates the resource recovery, because the efficiency of recycling processes is dependent on the concentration of the input material. KW - Klärschlammaschen KW - NE-Metalle KW - Phosphor KW - Rostaschen KW - Bottom ash KW - Nonferrous metals KW - Phosphorus KW - Sewage sludge ash PY - 2012 DO - https://doi.org/10.1002/cite.201100189 SN - 0009-286X SN - 1522-2640 VL - 84 IS - 7 SP - 999 EP - 1004 PB - Wiley-VCH CY - Weinheim AN - OPUS4-26209 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Adam, Christian A1 - Peplinski, Burkhard A1 - Michaelis, Matthias A1 - Kley, Gerd A1 - Simon, Franz-Georg T1 - Thermochemical treatment of sewage sludge ashes for phosphorus recovery N2 - Phosphorus (P) is an essential element for all living organisms and cannot be replaced. Municipal sewage sludge is a carrier of phosphorus, but also contains organic pollutants and heavy metals. A two-step thermal treatment is suggested, including mono-incineration of sewage sludge and subsequent thermochemical treatment of the ashes. Organic pollutants are completely destroyed by mono-incineration. The resulting sewage sludge ashes contain P, but also heavy metals. P in the ashes exhibits low bioavailability, a disadvantage in farming. Therefore, in a second thermochemical step, P is transferred into mineral phases available for plants, and heavy metals are removed as well. The thermochemical treatment was investigated in a laboratory-scale rotary furnace by treating seven different sewage sludge ashes under systematic variation of operational parameters. Heavy metal removal and the increase of the P-bioavailability were the focus of the investigation. The present experimental study shows that these objectives have been achieved with the proposed process. The P-bioavailability was significantly increased due to the formation of new mineral phases such as chlorapatite, farringtonite and stanfieldite during thermochemical treatment. KW - P-recovery KW - Sewage sludge ash KW - Thermochemical treatment KW - Mineral phases KW - X-ray diffraction PY - 2009 DO - https://doi.org/10.1016/j.wasman.2008.09.011 SN - 0956-053X VL - 29 IS - 3 SP - 1122 EP - 1128 PB - Pergamon Press CY - New York, NY AN - OPUS4-18605 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 3. Nachtrag zum Zulassungsschein 06/BAM IV.3/02/07 für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien N2 - 3. Nachtrag zum Zulassungsschein für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien der Fa. AGRU Kunststofftechnik GmbH, Bad Hall, Österreich. KW - Deponie KW - Zulassung KW - Kunststoffdichtungsbahn PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601245 SP - 1 EP - 9 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60124 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Adamczyk, Burkart A1 - Simon, Franz-Georg A1 - Adam, Christian T1 - RecArc - Verwertung von Rückständen aus der Metallurgie mit der Lichtbogentechnologie N2 - In dem Projekt soll die vollständige Wiederverwertbarkeit der Schlacke und ihrer Bestandteile demonstriert werden. Dazu gehören die vollständige Rückgewinnung der metallischen Phase, die in die Edelstahlherstellung zurückgeführt werden kann, sowie die Aufwertung der mineralischen Fraktion, die ihre uneingeschränkte Verwendung als Zementzumahlstoff oder mineralischer Baustoff erlaubt. Bei geeigneter Prozessführung des elektrischen Lichtbogenofens können durch „reduzierendes Schmelzen“ die chromhaltigen Wertstoffe zusammen mit anderen Schwermetallen zu 97% in einer Metalllegierung angereichert und separiert werden. Diese kann als Rohstoff in der Metallurgie eingesetzt werden. Der Chromgehalt der mineralischen Komponte der Schlacke konnte von ca. 3% auf unter 0,1% verringert werden. Die mineralische Fraktion lässt sich durch entsprechende Zuschläge während des Schmelzbetriebes und eine anschließende Granulation der schmelzflüssigen Phase zu einem Material aufwerten, das in seiner Zusammensetzung und seinen Eigenschaften typischen Zementkomponenten entspricht und als Rohstoff in der Zementproduktion eingesetzt werden kann. Dafür müssen allerdings noch die rechtlichen Voraussetzungen geschaffen werden, da der Rohstoffeinsatz gerade im Zement strengen Auflagen unterliegt und die Zemente bestimmte Normen erfüllen müssen. Durch die in RECARC aufgezeigte Möglichkeit der Wiederverwertung können somit Stoffkreisläufe geschlossen werden, die ansonsten zu einem Verlust wertvoller Rohstoffe führen. Vor allem die steigenden Rohstoffkosten, aber auch die immer stärker limitierten CO2-Emissionen zeigen die hohe Relevanz im Umgang mit metallurgischen Reststoffen. Eine Überführung des in RECARC demonstrierten Verfahrens in die Industrie könnte einen wichtigen Beitrag zur nachhaltigen Schonung der natürlichen Ressourcen und der Umwelt leisten. KW - Chrom KW - Lichtbogenofen KW - Recycling KW - Rückgewinnung KW - Schlacke PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-390197 SP - 1 EP - 4 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-39019 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 1. Nachtrag zum Zulassungsschein 06/BAM 4.3/01/14 für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien N2 - 1. Nachtrag zum Zulassungsschein für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien der Fa. AGRU Kunststofftechnik GmbH, Bad Hall, Österreich. KW - Deponie KW - Zulassung KW - Kunststoffdichtungsbahn PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601147 SP - 1 EP - 6 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60114 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 5. Nachtrag zum Zulassungsschein 13/BAM 4.3/04/12 für ein Kunststoff-Dränelement für Deponieoberflächenabdichtungen N2 - 5. Nachtrag zum Zulassungsschein 13/BAM 4.3/04/12 für ein Kunststoff-Dränelement für Deponieoberflächenabdichtungen der Firma Solmax Geosynthetics GmbH, Hamburg. KW - Deponie KW - Kunststoff-Dränelement KW - Abdichtungssystem PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-628712 SP - 1 EP - 5 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-62871 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 2. Nachtrag zum Zulassungsschein 06/BAM 4.3/04/16 für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien N2 - 2. Nachtrag zum Zulassungsschein für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien der Fa. AGRU Kunststofftechnik GmbH, Bad Hall, Österreich. KW - Deponie KW - Zulassung KW - Kunststoffdichtungsbahn PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601269 SP - 1 EP - 6 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60126 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 2. Nachtrag zum Zulassungsschein 06/BAM 4.3/05/16 für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien N2 - 2. Nachtrag zum Zulassungsschein 06/BAM 4.3/05/16 für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien der Fa. AGRU Kunststofftechnik GmbH, Bad Hall, Österreich. KW - Deponie KW - Zulassung KW - Kunststoffdichtungsbahn PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601270 SP - 1 EP - 7 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60127 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Adam, Christian A1 - Adamczyk, Burkart A1 - Weimann, Karin ED - White, T. ED - Ferraris, C. ED - Yu, L. ED - Halada, K. ED - Umezawa, O. T1 - Recovery of non-renewable resources from waste T2 - 7th International Conference on Ecomaterials (ICEM7); 3rd International Conference on Advanced Materials (ICMAT2005) CY - Singapore DA - 2005-07-03 PY - 2005 SN - 981-05-3611-9 VL - 1 SP - 148 EP - 155 PB - Stallion Press CY - Singapore AN - OPUS4-11831 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -