TY - JOUR A1 - Bandow, N. A1 - Aitken, M. D. A1 - Geburtig, Anja A1 - Kalbe, Ute A1 - Piechotta, Christian A1 - Schoknecht, Ute A1 - Simon, Franz-Georg A1 - Stephan, Ina T1 - Using Environmental Simulations to Test the Release of Hazardous Substances from Polymer-Based Products: Are Realism and Pragmatism Mutually Exclusive Objectives? N2 - The potential release of hazardous substances from polymer-based products is currently in the focus of environmental policy. Environmental simulations are applied to expose such products to selected aging conditions and to investigate release processes. Commonly applied aging exposure types such as solar and UV radiation in combination with water contact, corrosive gases, and soil contact as well as expected general effects on polymers and additional ingredients of polymer-based products are described. The release of substances is based on mass-transfer processes to the material surfaces. Experimental approaches to investigate transport processes that are caused by water contact are presented. For tailoring the tests, relevant aging exposure types and release quantification methods must be combined appropriately. Several studies on the release of hazardous substances such as metals, polyaromatic hydrocarbons, flame retardants, antioxidants, and carbon nanotubes from polymers are summarized exemplarily. Differences between natural and artificial exposure tests are discussed and demonstrated for the release of flame retardants from several polymers and for biocides from paints. Requirements and limitations to apply results from short-term artificial environmental exposure tests to predict long-term environmental behavior of polymers are presented. KW - Environmental simulations KW - Polymer-based products KW - Artificial weathering KW - Degradation KW - Leaching KW - Soil contact PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-509310 DO - https://doi.org/10.3390/ma13122709 SN - 1996-1944 VL - 13 IS - 12 SP - Paper 2709, 22 PB - MDPI CY - Basel, Switzerland AN - OPUS4-50931 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Peplinski, Burkhard A1 - Adam, Christian A1 - Michaelis, Matthias A1 - Kley, Gerd A1 - Emmerling, Franziska A1 - Simon, Franz-Georg T1 - Reaction sequences in the thermochemical treatment of sewage sludge ashes revealed by X-ray powder diffraction - A contribution to the European project SUSAN N2 - The sequence of reactions accompanying the thermochemical treatment of an iron- and aluminium-bearing sewage sludge ash was ascertained by investigating two systematic series of samples. The ash was thermochemically treated in a lab-scale rotary furnace after mixing it with a chlorine-donor, either CaCl2 or MgCl2. Within each of these two sample series only a single process parameter, the reaction temperature, was varied, namely between 350 and 1050°C. It was found, that among the numerous crystalline phases present in the raw ash only quartz and hematite continue to exist after thermochemical treatments carried out at 1050°C, whereas all other components undergo at least one decomposition-recrystallization cycle. Some of the components re-crystallize even several times. It was proved that the restructuring of the calcium- and phosphorus-bearing mineral phases proceeds via the formation of chlorspodioside, Ca2PO4Cl. The influence of the type of chlorine-donor on the final product was elucidated in detail and - to the best of our knowledge - for the first time crystalline AlPO4 was found in a sewage sludge ash and its decomposition was investigated, too. KW - XRD KW - Phosphorus recovery KW - Sewage sludge ash KW - Urban mining KW - Fertilizers PY - 2009 DO - https://doi.org/10.1524/zksu.2009.0068 SN - 0930-486X VL - 30 EPDIC 2008 SP - 459 EP - 464 PB - Oldenbourg CY - München AN - OPUS4-20562 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 8. Nachtrag zum Zulassungsschein 12/BAM IV.3/09/00 für eine Schutzschicht bestehend aus einer sandgefüllten Schutzbahn für Kunststoffdichtungsbahnen in Deponieabdichtungen N2 - 8. Nachtrag zum Zulassungsschein 12/BAM IV.3/09/00 für eine Schutzschicht bestehend aus einer sandgefüllten Schutzbahn für Kunststoffdichtungsbahnen in Deponieabdichtungen der Fa. G quadrat GmbH, Krefeld. KW - Zulassung KW - Deponie KW - Schutzschicht KW - Kunststoffdichtungsbahn PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-604877 SP - 1 EP - 29 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60487 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 6. Nachtrag zum Zulassungsschein 08/BAM 4.3/02/14 für ein Kunststoff-Dränelement für Deponieoberflächenabdichtungen N2 - 6. Nachtrag zum Zulassungsschein für ein Kunststoff-Dränelement für Deponieoberflächenabdichtungen der Fa. Naue GmbH & Co. KG. KW - Deponie KW - Zulassung KW - Kunststoff-Dränelement PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601339 SP - 1 EP - 27 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60133 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 3. Nachtrag zum Zulassungsschein 08/BAM IV.3/04/04 für eine geotextile Schutzlage als Bestandteil einer Schutzschicht aus geosynthetischer Schutzlage und feinkiesiger mineralischer Schutzlage für Dichtungsbahnen in Deponieabdichtungen N2 - 3. Nachtrag zum Zulassungsschein für eine geotextile Schutzlage als Bestandteil einer Schutzschicht aus geosynthetischer Schutzlage und feinkiesiger mineralischer Schutzlage für Dichtungsbahnen in Deponieabdichtungen der Fa. HUESKER Synthetic GmbH, Gescher. KW - Deponie KW - Zulassung KW - Schutzschicht PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601315 SP - 1 EP - 21 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60131 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 6. Nachtrag zum Zulassungsschein 08/BAM IV.3/08/10 für Vliesstoffe zum Filtern und Trennen für Deponieabdichtungen N2 - 6. Nachtrag zum Zulassungsschein für Vliesstoffe zum Filtern und Trennen für Deponieabdichtungen der Fa. Naue GmbH & Co. KG, Espelkamp. KW - Deponie KW - Zulassung KW - Geotextilien PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601324 SP - 1 EP - 19 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60132 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 11. Nachtrag zum Zulassungsschein 08/BAM 8.3/10/94 für eine Vliesstoffmatte als Bestandteil einer Schutzschicht aus geosynthetischer Schutzlage und feinkiesiger mineralischer Schutzlage für Dichtungsbahnen in Deponieabdichtungen N2 - 11. Nachtrag zum Zulassungsschein für eine Vliesstoffmatte als Bestandteil einer Schutzschicht aus geosynthetischer Schutzlage und feinkiesiger mineralischer Schutzlage für Dichtungsbahnen in Deponieabdichtungen der Fa. Naue GmbH & Co. KG. KW - Deponie KW - Zulassung KW - Schutzschicht PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601343 SP - 1 EP - 20 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60134 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 3. Nachtrag zum Zulassungsschein 08/BAM IV.3/10/10 für Vliesstoffe zum Filtern und Trennen für Deponieabdichtungen N2 - 3. Nachtrag zum Zulassungsschein für Vliesstoffe zum Filtern und Trennen für Deponieabdichtungen der Fa. HUESKER Synthetic GmbH, Gescher. KW - Deponie KW - Zulassung KW - Geotextilien PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601307 SP - 1 EP - 25 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60130 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 3. Nachtrag zum Zulassungsschein 06/BAM IV.3/03/07 für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien N2 - 3. Nachtrag zum Zulassungsschein für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien der Fa. AGRU Kunststofftechnik GmbH, Bad Hall, Österreich. KW - Deponie KW - Zulassung KW - Kunststoffdichtungsbahn PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601285 SP - 1 EP - 9 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60128 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 3. Nachtrag zum Zulassungsschein 06/BAM IV.3/04/99 für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien N2 - 3. Nachtrag zum Zulassungsschein für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien der Fa. AGRU Kunststofftechnik GmbH, Bad Hall, Österreich. KW - Deponie KW - Zulassung KW - Kunststoffdichtungsbahn PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601298 SP - 1 EP - 6 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60129 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 1. Nachtrag zum Zulassungsschein 06/BAM 4.3/01/19 für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien N2 - 1. Nachtrag zum Zulassungsschein für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien der Fa. AGRU Kunststofftechnik GmbH, Bad Hall, Österreich. KW - Deponie KW - Zulassung KW - Kunststoffdichtungsbahn PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601159 SP - 1 EP - 6 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60115 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 30 Jahre BAM-Zulassung (in der Deponietechnik): material- und prüftechnische Entwicklungen T1 - 30 years of BAM approvals (in landfill technology): material and testing developments N2 - Vor 30 Jahren wurde die erste BAM-Zulassung für ein Geokunststoffprodukt in der Deponietechnik ausgestellt. Seither wurden immer wieder eigene wissenschaftliche Untersuchungen durchgeführt, neue Forschungsergebnisse herangezogen und die Prüftechnik weiterentwickelt, um die Eignung und Funktionsdauer von Kunststoffdichtungsbahnen, Schutzschichten, Kunststoff-Dränelementen, geotextilen Filtern oder Bewehrungsgittern beurteilen zu können. Einige dieser Entwicklungen werden hier diskutiert. KW - Deponie KW - Geokunststoffe KW - Kunststoffdichtungsbahnen KW - Langzeitverhalten PY - 2019 DO - https://doi.org/10.1002/bate.201900076 VL - 96 IS - 12 SP - 912 EP - 918 PB - Ernst & Sohn CY - Berlin AN - OPUS4-49973 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 2. Nachtrag zum Zulassungsschein 06/BAM 4.3/04/16 für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien N2 - 2. Nachtrag zum Zulassungsschein für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien der Fa. AGRU Kunststofftechnik GmbH, Bad Hall, Österreich. KW - Deponie KW - Zulassung KW - Kunststoffdichtungsbahn PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601269 SP - 1 EP - 6 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60126 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 2. Nachtrag zum Zulassungsschein 06/BAM 4.3/05/16 für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien N2 - 2. Nachtrag zum Zulassungsschein 06/BAM 4.3/05/16 für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien der Fa. AGRU Kunststofftechnik GmbH, Bad Hall, Österreich. KW - Deponie KW - Zulassung KW - Kunststoffdichtungsbahn PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601270 SP - 1 EP - 7 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60127 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 3. Nachtrag zum Zulassungsschein 06/BAM IV.3/02/07 für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien N2 - 3. Nachtrag zum Zulassungsschein für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien der Fa. AGRU Kunststofftechnik GmbH, Bad Hall, Österreich. KW - Deponie KW - Zulassung KW - Kunststoffdichtungsbahn PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601245 SP - 1 EP - 9 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60124 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Adamczyk, Burkart A1 - Simon, Franz-Georg A1 - Adam, Christian T1 - RecArc - Verwertung von Rückständen aus der Metallurgie mit der Lichtbogentechnologie N2 - In dem Projekt soll die vollständige Wiederverwertbarkeit der Schlacke und ihrer Bestandteile demonstriert werden. Dazu gehören die vollständige Rückgewinnung der metallischen Phase, die in die Edelstahlherstellung zurückgeführt werden kann, sowie die Aufwertung der mineralischen Fraktion, die ihre uneingeschränkte Verwendung als Zementzumahlstoff oder mineralischer Baustoff erlaubt. Bei geeigneter Prozessführung des elektrischen Lichtbogenofens können durch „reduzierendes Schmelzen“ die chromhaltigen Wertstoffe zusammen mit anderen Schwermetallen zu 97% in einer Metalllegierung angereichert und separiert werden. Diese kann als Rohstoff in der Metallurgie eingesetzt werden. Der Chromgehalt der mineralischen Komponte der Schlacke konnte von ca. 3% auf unter 0,1% verringert werden. Die mineralische Fraktion lässt sich durch entsprechende Zuschläge während des Schmelzbetriebes und eine anschließende Granulation der schmelzflüssigen Phase zu einem Material aufwerten, das in seiner Zusammensetzung und seinen Eigenschaften typischen Zementkomponenten entspricht und als Rohstoff in der Zementproduktion eingesetzt werden kann. Dafür müssen allerdings noch die rechtlichen Voraussetzungen geschaffen werden, da der Rohstoffeinsatz gerade im Zement strengen Auflagen unterliegt und die Zemente bestimmte Normen erfüllen müssen. Durch die in RECARC aufgezeigte Möglichkeit der Wiederverwertung können somit Stoffkreisläufe geschlossen werden, die ansonsten zu einem Verlust wertvoller Rohstoffe führen. Vor allem die steigenden Rohstoffkosten, aber auch die immer stärker limitierten CO2-Emissionen zeigen die hohe Relevanz im Umgang mit metallurgischen Reststoffen. Eine Überführung des in RECARC demonstrierten Verfahrens in die Industrie könnte einen wichtigen Beitrag zur nachhaltigen Schonung der natürlichen Ressourcen und der Umwelt leisten. KW - Chrom KW - Lichtbogenofen KW - Recycling KW - Rückgewinnung KW - Schlacke PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-390197 SP - 1 EP - 4 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-39019 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 1. Nachtrag zum Zulassungsschein 06/BAM 4.3/01/14 für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien N2 - 1. Nachtrag zum Zulassungsschein für Kunststoffdichtungsbahnen (KDB) in Basis- und Oberflächenabdichtungen von Deponien der Fa. AGRU Kunststofftechnik GmbH, Bad Hall, Österreich. KW - Deponie KW - Zulassung KW - Kunststoffdichtungsbahn PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601147 SP - 1 EP - 6 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-60114 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GOVDOC A1 - Simon, Franz-Georg A1 - Wöhlecke, Andreas T1 - 5. Nachtrag zum Zulassungsschein 13/BAM 4.3/04/12 für ein Kunststoff-Dränelement für Deponieoberflächenabdichtungen N2 - 5. Nachtrag zum Zulassungsschein 13/BAM 4.3/04/12 für ein Kunststoff-Dränelement für Deponieoberflächenabdichtungen der Firma Solmax Geosynthetics GmbH, Hamburg. KW - Deponie KW - Kunststoff-Dränelement KW - Abdichtungssystem PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-628712 SP - 1 EP - 5 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-62871 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg T1 - Recovery of non-renewable resources from waste T2 - 9th International Conference on Advanced Materials CY - Singapore DA - 2005-07-03 PY - 2005 AN - OPUS4-7375 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Adam, Christian A1 - Kley, Gerd A1 - Simon, Franz-Georg A1 - Lehmann, Annekatrin ED - Filibeli, A. ED - F. Dilek Sanin, ED - Ayol, A. ED - Selim L. Sanin, T1 - Recovery of nutrients from sewage sludge - Results of the European research-project SUSAN T2 - IWA-Specialist Conference "Facing Sludge Diversities: Challenges, Risks and Opportunities" CY - Antalya, Turkey DA - 2007-03-28 KW - Phosphorus recovery KW - Sewage sludge ash KW - Thermo-chemical treatment KW - Fertiliser PY - 2007 N1 - Serientitel: Journal of environmental science and health : Part A, Toxic/hazardous substances & environmental engineering – Series title: Journal of environmental science and health : Part A, Toxic/hazardous substances & environmental engineering IS - 43.2008,13 SP - 297 EP - 305 PB - Taylor & Francis CY - Philadalphia, PA AN - OPUS4-16468 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Adam, Christian A1 - Kley, Gerd A1 - Simon, Franz-Georg T1 - Thermal treatment of municipal sewage sludge aiming at marketable P-fertilisers N2 - Municipal sewage sludge is a carrier of nutrients – most important phosphorus (P) – but also contains organic pollutants and heavy metals. A two steps thermal treatment is suggested based on 1. mono-incineration of sewage sludge under destruction of organic pollutants and 2. thermochemical treatment of the resulting ashes to remove heavy metals and increase P-bioavailability. The targeted products are marketable P-fertilisers. The thermochemical treatment was investigated in a gas tight lab-scale rotary furnace. Seven sewage sludge ashes of different origin and composition and one residue from gasification of sewage sludge were mixed with a chlorine donor (e.g. MgCl2) and thermochemically treated under systematic variation of operational parameters. The distributions of the heavy metals between solid and gas phase were determined. The heavy metals concentrations of the treated ashes met the legislative limits in most cases. The products from thermochemical treatment are suited raw materials for P-fertiliser production. Relevant process parameters such as temperature, type and concentration of Cl-donor and retention time were optimised for the thermochemical treatment step. KW - Sewage sludge KW - Mono-incineration KW - Ash treatment KW - Thermochemical treatment KW - Phosphorus-fertiliser PY - 2007 SN - 1345-9678 SN - 1347-5320 VL - 48 IS - 12 SP - 3056 EP - 3061 PB - Japan Institute of Metals CY - Sendai AN - OPUS4-16647 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Franz-Georg A1 - Adam, Christian T1 - Ressourcen aus Abfall T1 - Resources from waste N2 - Die Beseitigung unbehandelter Abfälle auf Deponien gehört der Vergangenheit an, nicht nur weil Verordnungen diese Praxis verbieten, sondern auch, weil wegen steigender Preise für Rohstoffe und sinkender Gehalte in Erzen auch in Abfällen nach Alternativen gesucht wird. In den Aschen aus Hausmüllverbrennungsanlagen können mit einfachen Verfahren Metalle zurückgewonnen werden. Mit dem Phosphor aus Klärschlammaschen können Düngemittel hergestellt und so natürliche Ressourcen geschont werden. In beiden Fällen ist die Anreicherung der Wertstoffe durch den Verbrennungsprozess vorteilhaft, da die Effizienz von Recyclingprozessen stark von der Konzentration im Ausgangsgut abhängig ist. N2 - Disposal of untreated waste has come to end due to new legislation in this field. Furthermore as a response to increasing prices for primary raw materials and decreasing ore concentrations products from waste treatment display a source for secondary raw materials. Elemental metals can be easily separated from municipal solid waste incineration bottom ash. Fertilizers can be produced using phosphate from sewage sludge ashes thus preserving natural resources. In both cases the enrichment taking place in the incineration process facilitates the resource recovery, because the efficiency of recycling processes is dependent on the concentration of the input material. KW - Klärschlammaschen KW - NE-Metalle KW - Phosphor KW - Rostaschen KW - Bottom ash KW - Nonferrous metals KW - Phosphorus KW - Sewage sludge ash PY - 2012 DO - https://doi.org/10.1002/cite.201100189 SN - 0009-286X SN - 1522-2640 VL - 84 IS - 7 SP - 999 EP - 1004 PB - Wiley-VCH CY - Weinheim AN - OPUS4-26209 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Adam, Christian A1 - Peplinski, Burkhard A1 - Michaelis, Matthias A1 - Kley, Gerd A1 - Simon, Franz-Georg T1 - Thermochemical treatment of sewage sludge ashes for phosphorus recovery N2 - Phosphorus (P) is an essential element for all living organisms and cannot be replaced. Municipal sewage sludge is a carrier of phosphorus, but also contains organic pollutants and heavy metals. A two-step thermal treatment is suggested, including mono-incineration of sewage sludge and subsequent thermochemical treatment of the ashes. Organic pollutants are completely destroyed by mono-incineration. The resulting sewage sludge ashes contain P, but also heavy metals. P in the ashes exhibits low bioavailability, a disadvantage in farming. Therefore, in a second thermochemical step, P is transferred into mineral phases available for plants, and heavy metals are removed as well. The thermochemical treatment was investigated in a laboratory-scale rotary furnace by treating seven different sewage sludge ashes under systematic variation of operational parameters. Heavy metal removal and the increase of the P-bioavailability were the focus of the investigation. The present experimental study shows that these objectives have been achieved with the proposed process. The P-bioavailability was significantly increased due to the formation of new mineral phases such as chlorapatite, farringtonite and stanfieldite during thermochemical treatment. KW - P-recovery KW - Sewage sludge ash KW - Thermochemical treatment KW - Mineral phases KW - X-ray diffraction PY - 2009 DO - https://doi.org/10.1016/j.wasman.2008.09.011 SN - 0956-053X VL - 29 IS - 3 SP - 1122 EP - 1128 PB - Pergamon Press CY - New York, NY AN - OPUS4-18605 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg A1 - Kalbe, Ute A1 - Adam, Christian A1 - Adamczyk, Burkart A1 - Weimann, Karin T1 - Recovery of non-renewable resources from waste T2 - 7th International Conference on EcoBalance CY - Tsukuba, Japan DA - 2006-11-14 KW - Natural resources KW - Thermo-chemical treatment KW - Waste management KW - Sewage sludge KW - Aggregetes PY - 2006 IS - E2-4 SP - 499 EP - 502 PB - The Society of Non-Traditional Technology CY - Tsukuba, Japan AN - OPUS4-14115 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg T1 - Verwertungsoptionen für Verbrennungsrückstände biogenen Ursprungs T2 - Biogener Abfall - ein heimischer Energieträger mit Zukunft, Internationales Symposium CY - Tulln an der Donau, Austria DA - 2009-05-13 PY - 2009 AN - OPUS4-19385 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kley, Gerd A1 - Adam, Christian A1 - Brenneis, Rudolf A1 - Simon, Franz-Georg T1 - Thermochemische Aufbereitung von Klärschlammaschen zu Phosphordüngern - Das EU-Projekt SUSAN T2 - 75. Darmstädter Seminar "Abwassertechnik" CY - Darmstadt, Deutschland DA - 2005-11-12 KW - Phosphor KW - Ressourcenschutz KW - Thermochemische Behandlung KW - Chlorierung KW - Düngemittel KW - Stofftrennung KW - Klärschlamm KW - Mono-Verbrennung PY - 2005 SN - 3-932518-63-2 N1 - Serientitel: Schriftenreihe WAR – Series title: Schriftenreihe WAR IS - 167 SP - 265 EP - 285 PB - Inst. WAR CY - Darmstadt AN - OPUS4-11683 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Adam, Christian A1 - Kley, Gerd A1 - Simon, Franz-Georg A1 - Lehmann, Annekatrin T1 - Recovery of nutrients from sewage sludge - Results of the European research-project SUSAN N2 - Municipal sewage sludge is a carrier of nutrients – most important phosphorus (P) – but also contains organic pollutants and heavy metals. A two steps thermal treatment based on 1. mono-incineration of sewage sludge under destruction of organic pollutants and 2. thermochemical treatment of the resulting ashes to remove heavy metals and increase P-bioavailability is suggested by the authors. The process aims at P-fertilisers production from sewage sludge. Seven sewage sludge ashes of different origin and composition and one residue from gasification of sewage sludge were thermochemically treated. The raw ashes were mixed with a chlorine donor (e.g. MgCl2) and thermally treated in a gas tight lab-scale rotary furnace. The distributions of the heavy metals between solid and gas phase were determined. The heavy metals concentrations of the treated ashes matched the legislative limits in most cases. The products from thermochemical treatment are suited raw materials for P-fertiliser production. Relevant process parameters such as temperature, type and concentration of Cl-donor and retention time were optimised for the thermochemical treatment step. KW - Phosphorus recovery KW - Sewage sludge ash KW - Thermochemical treatment KW - Fetiliser PY - 2008 DO - https://doi.org/10.2166/wpt.2008.001 SN - 1751-231X VL - 3 IS - 1 SP - 1 EP - 8 PB - IWA Publishing AN - OPUS4-17700 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Peplinski, Burkhard A1 - Adam, Christian A1 - Reuther, H. A1 - Vogel, Christian A1 - Adamczyk, Burkart A1 - Menzel, Michael A1 - Emmerling, Franziska A1 - Simon, Franz-Georg T1 - First identification of the tridymite form of AlPO4 in municipal sewage sludge ash N2 - Sewage sludge and sewage sludge ashes (SSA) are produced in huge amounts at municipal waste water treatment plants (WWTP) all around the world and have become an issue for many urbanized areas. To deal with this unceasing mass flow in an ecologically and economically responsible way a comprehensive chemical and structural characterization of all types of SSA is needed. X-ray powder diffraction (XRD) is one of the most promising analytical methods for this task. Although, there has been ample chemical evidence showing that many SSA contain aluminium phosphate as a major component up to now no aluminium phosphate or aluminium-rich mixed phosphate phase has been reported to be identified by XRD in a SSA produced at a mono-incineration facility. The outcome of the present com-bined XRD and Mossbauer spectroscopy investigation provides comprehensive evidence closing this gap for the first time. KW - Aluminium phosphate KW - AlPO4 KW - Tridymite KW - Sewage sludge ash KW - Incinerator KW - Ash PY - 2011 DO - https://doi.org/10.1524/zkpr.2011.0067 SN - 0044-2968 VL - 1 SP - 443 EP - 448 PB - Oldenbourg CY - München AN - OPUS4-24297 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Wöhlecke, Andreas A1 - Simon, Franz-Georg A1 - Biedermann, K. A1 - Bräcker, W. A1 - Engelmann, B. A1 - Zanzinger, H. T1 - Sind BAM-Zulassung und CE-Kennzeichnung im Wesentlichen gleichwertig? - Der Nachweis des Standes der Technik gemäß Deponieverordnung für Geotextilien und geotextilverwandte Produkte, Teil 2 N2 - Im ersten Teil dieses Aufsatzes wurde gezeigt, dass nur ein Teil der für den Deponiebau wesentlichen technischen Eigenschaften in den europäisch harmonisierten Bauproduktnormen DIN EN 13252 und DIN EN 13257, die der CE-Kennzeichnung der Geotextilien (GTX) und geotextilverwandten Produkte (GTP) zugrunde liegen, erfasst werden. Um eine im Wesentlichen vorhandene Gleichwertigkeit der Produkteigenschaften überhaupt abwägen zu können, müssen aber sämtliche relevanten Eigenschaften bekannt sein. Dies erfordert für CE-gekennzeichnete Produkte zusätzliche Prüfungen auf der Grundlage der DepV-Liste der Kriterien und Einwirkmechanismen (Anhang 1, Nummer 2.1.1, DepV). In diesem Teil werden die Tabellen C1 und C2 sowie die Tabelle D aus dem ersten Teil, in denen die Eigenschaften der harmonisierten europäischen Normen (hEN) den Anforderungen der DepV gegenübergestellt wurden, in technischer Hinsicht näher erläutert. N2 - A comparison of the harmonized technical specifications (in our case the harmonized European standards (hEN), namely DIN EN 13252 and DIN EN 13257), on which the CE-marking of geotextiles and geotextile-related products is based, with the German landfill ordinance (DepV) shows that only a few of the essential technical characteristics actually relevant for landfill constructions are considered in these standards. To be able to ponder about the equivalency of products with respect to their properties, all relevant properties have to be known. Therefore, additional tests based on the DepV-list of criteria and mechanisms of action (Annex 1, no. 2.1.1) are necessary for CE-marked products. This was discussed in the first part of this article. In this part, the tables C1, C2 and D of the first part, which listed and compared the requirements of the hEN and the DepV, are discussed in more technical details. KW - Deponieverordnung KW - BAM-Zulassung KW - Geokunststoffe KW - CE-Kennzeichnung PY - 2015 SN - 0027-2957 SN - 1863-9763 VL - 47 IS - 1 SP - 36 EP - 41 PB - Erich Schmidt CY - Berlin AN - OPUS4-32694 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Adam, Christian A1 - Peplinski, Burkhard A1 - Kley, Gerd A1 - Simon, Franz-Georg ED - Hilty, L. M. T1 - Thermo-chemical treatment of sewage sludge ashes aiming at marketable P-fertiliser products T2 - R'07 World Congress "Recovery of Materials and Energy for Resource Efficiency" CY - Davos, Switzerland DA - 2007-09-03 KW - P-recovery KW - Sewage sludge KW - Thermo-chemical treatment KW - Mineral phases KW - XRD PY - 2007 SN - 978-3-905594-49-2 SP - 14/1 EP - 14/7 PB - EMPA CY - Davos AN - OPUS4-16469 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Adam, Christian A1 - Adamczyk, Burkart A1 - Weimann, Karin ED - White, T. ED - Ferraris, C. ED - Yu, L. ED - Halada, K. ED - Umezawa, O. T1 - Recovery of non-renewable resources from waste T2 - 7th International Conference on Ecomaterials (ICEM7); 3rd International Conference on Advanced Materials (ICMAT2005) CY - Singapore DA - 2005-07-03 PY - 2005 SN - 981-05-3611-9 VL - 1 SP - 148 EP - 155 PB - Stallion Press CY - Singapore AN - OPUS4-11831 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Adam, Christian A1 - Brenneis, Rudolf A1 - Simon, Franz-Georg ED - Martin Faulstich, ED - Peter Quicker, T1 - Ascheentsorgung - Acker oder Deponie? T2 - 4. Fachtagung "Verfahren & Werkstoffe für die Energietechnik - Biomasse & Abfall - Regionale Brennstoffe richtig nutzen" CY - Sulzbach-Rosenberg DA - 2008-06-11 PY - 2008 SN - 978-3-9810391-3-9 N1 - Serientitel: Verfahren & Werkstoffe für die Energietechnik – Series title: Verfahren & Werkstoffe für die Energietechnik IS - 4 SP - 227 EP - 243 PB - DORNER PrintConcept GmbH + Co. KG CY - Sulzbach-Rosenberg AN - OPUS4-17609 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Adam, Christian A1 - Brenneis, Rudolf A1 - Adamczyk, Burkart A1 - Simon, Franz-Georg T1 - Recycling of waste materials by thermochemical treatment T2 - ISWA World congress 2010 - Urban development and sustainbility - a major challenge for waste management in the 21st century CY - Hamburg, Germany DA - 2010-11-15 KW - thermochemical substance separation KW - Thermodynamics KW - Thermochemistry PY - 2010 SP - 1 EP - 10(?) AN - OPUS4-22467 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Werner A1 - Wöhlecke, Andreas A1 - Simon, Franz-Georg A1 - Biedermann, K. A1 - Bräcker, W. A1 - Engelmann, B. A1 - Zanzinger, H. T1 - Sind BAM-Zulassung und CE-Kennzeichnung im Wesentlichen gleichwertig - Der Nachweis des Standes der Technik gemäß Deponieverordnung für Geotextilien und geotextilverwandte Produkte, Teil 1 N2 - In absehbarer Zeit werden CE-gekennzeichnete Geovliesstoffe, Geogewebe, geosynthetische Dränelemente und Geogitter aus Kunststoff erhältlich sein, bei denen die CE-Leistungserklärung den Hinweis enthält 'dauerhaft für bis zu 100 Jahre' oder sogar 'dauerhaft für mindestens 100 Jahre'. Hersteller, Bauherren, Planer und zuständige Behörden werden sich daher die Frage stellen, ob diese Produkte auf der Grundlage von Anhang 1 Nummer 2.1 Satz 7 Ziffer 1 der Deponieverordnung (DepV) im Deponiebau auch ohne Zulassung verwendet werden dürfen. Ein Vergleich der europäisch harmonisierten Bauproduktnormen DIN EN 13252 und DIN EN 13257, die der CE-Kennzeichnung der Geotextilien und geotextilverwandten Produkte zugrunde liegen, mit den Anforderungen der DepV zeigt nun aber, dass nur ein Teil der für den Deponiebau wesentlichen technischen Eigenschaften in diesen Normen erfasst werden. Daher sind für CE gekennzeichnete Produkte zusätzliche Prüfungen auf der Grundlage der DepV-Liste der Kriterien und Einwirkmechanismen erforderlich. Die in den Produktnormen beschriebene Qualitätssicherung ist nach Anhang 1 Nummer 2 Satz 14 ff der DepV ebenfalls für die Gleichwertigkeit nicht ausreichend. Eine CE-Kennzeichnung ist deshalb noch kein Nachweis, dass die Produkte dem Stand der Technik nach der DepV entsprechen und die Eigenschaften der Produkte den geforderten Eigenschaften im Wesentlichen gleichwertig sind, auch wenn mit Bezug auf den Anhang B der genannten Normen deren Dauerhaftigkeit für 100 Jahre vom Hersteller deklariert wird.---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- In the near future, CE-marked woven and nonwoven geotextiles, geocomposite drains and geogrids will be available on the market, whose declaration of performance will contain the qualification 'predicted service life up to 100 years' or even 'predicted service life minimum 100 years'. Manufacturer, principals and their design engineers as well as the responsible authorities will have to deal with the question, whether such products can be used on the basis of Annex 1, no. 2.1, sentence 7, cipher 1 of the German landfill ordinance (DepV) as components of landfill liner and capping systems. A comparison of the harmonized European standards hEN 13252 and 13257, on which the CE-marking of geotextiles and geotextile-related products is based, with the DepV, shows that only a few of the essential technical characteristics actually relevant for landfill constructions are considered in these standards. Therefore, additional tests based on the DepV-list of criteria and mechanisms of action are necessary for CE-marked products. Requirements on quality managements in the hEN are likewise not adequate for essential equivalence with respect to annex 1, No. 2.1, sentence 14 ff, DepV. Therefore, CE-marking is actually no proof of the fulfilment of the state of the techno logy according to the DepV and of the essential equivalence of product properties to the required properties, albeit the declaration of performance indicates a predicted service life of 100 years. KW - Deponieverordnung KW - BAM-Zulassung KW - Geokunststoffe KW - CE-Kennzeichnung PY - 2014 SN - 0027-2957 SN - 1863-9763 VL - 46 IS - 12 SP - 680 EP - 688 PB - Erich Schmidt CY - Berlin AN - OPUS4-32466 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Adam, Christian A1 - Kley, Gerd A1 - Simon, Franz-Georg ED - Wang, B. ED - J.H. Song, ED - H. Abe, T1 - Thermal treatment of municipal sewage sludge aiming at marketable P-fertilisers T2 - 8th International Conference on Eco-materials (ICEM8 2007) CY - London, UK DA - 2007-07-09 KW - Sewage sludge KW - Mono-incineration KW - Ash treatment KW - Thermo-chemical treatment KW - P-fertiliser PY - 2007 SN - 978-1-902316-54-3 VL - 2 SP - 435 EP - 442 PB - Brunel University Press CY - London, UK AN - OPUS4-16470 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg A1 - Brenneis, Rudolf A1 - Adam, Christian T1 - Verwertungsoptionen für Verbrennungsrückstände biogenen Ursprungs PY - 2009 N1 - Serientitel: Schriftenreihe: Club Niederösterreich – Series title: Schriftenreihe: Club Niederösterreich VL - 4/5 SP - 46 EP - 56 CY - Wien, Österreich AN - OPUS4-20389 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -