TY - RPRT A1 - Meggyes, Tamás A1 - Debreczeni, Ákos A1 - Reddy, Krishna R. A1 - Karri, Madhusudhana R. A1 - Riddler, Gordon P. A1 - Roehl, Karl Ernst A1 - Czurda, Kurt A1 - Sarsby, Robert W. A1 - Simon, Franz-Georg A1 - Biermann, Vera T1 - Sustainable environmental protection N2 - Permeable reactive barriers (PRBs) offer an alternative as opposed to more cost-intensive active methods for groundwater remediation, e.g. pump-and-treat. Long-term performance of PRBs, however, is crucial for the technology’s success. The paper summarises the results of long-term column experiments with elemental iron (Fe0) and hydroxyapatite (HAP) as reactive materials for the removal of uranium from groundwater. Good removal results have been achieved using elemental iron with possible reaction paths being reductive precipitation and adsorption on to corrosion products of Fe0. T3 - BAM Forschungsberichtreihe - 280 PY - 2007 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1710 SN - 978-3-9811655-2-4 SN - 0938-5533 VL - 280 SP - 1 EP - 54 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-171 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Simon, Franz-Georg A1 - Meggyes, Tamás T1 - Permeable reactive barriers for pollutant removal from groundwater N2 - Die Reduzierung von Schadstoffen im Grundwasser mit reaktiven Wänden ist eine neuartiges passives Sanierungsverfahren. Die am häufigsten angewandten Dekontaminierungsprozesse sind dabei chemische Reduktion, Oxidation, Ausfällung und Sorption, die im Bericht beispielhaft dargestellt sind. Blei, Chrom und insbesondere Uran werden unter den anorganischen Schadstoffen detailliert behandelt, da solche Grundwasserverunreinigung in vielen europäischen Ländern auftreten. Baumethoden für Dichtwände und reaktive Wände weisen gemeinsame Merkmale auf. Neben den gewöhnlichen Methoden werden Bohrverfahren, deep-soil-mixing, Strahltechnologien, Brunnengalerien, Injektionssysteme und Biobarrieren angewendet, um reaktive Wände zu errichten. Die Technik der reaktiven Wände besitzt ein großes Potential für die Sanierungstechnik der Zukunft. T3 - BAM Forschungsberichtreihe - 245 KW - groundwater remediation KW - reactive barriers KW - reduction KW - oxidation KW - precipitation KW - sorption KW - cut-off walls KW - funnel-and-gate systems KW - deep soil mixing KW - jet technology KW - arrays of wells KW - injected systems KW - biobarriers PY - 2001 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-2054 SN - 978-3-89701-653-2 SN - 0938-5533 VL - 245 SP - 1 EP - 34 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-205 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Vogel, Christian A1 - Roesch, Philipp A1 - Wittwer, Philipp A1 - Piechotta, Christian A1 - Lisec, Jan A1 - Sommerfeld, Thomas A1 - Kluge, Stephanie A1 - Herzel, Hannes A1 - Huthwelker, T. A1 - Borca, C. A1 - Simon, Franz-Georg T1 - Levels of per- and polyfluoroalkyl substances (PFAS) in various wastewater-derived fertilizers - Analytical investigations from different perspectives N2 - Solid wastewater-based fertilizers were screened for per- and polyfluoroalkyl substances (PFAS) by the extractable organic fluorine (EOF) sum parameter method. The EOF values for ten sewage sludges from Germany and Switzerland range from 154 to 7209 mg kg−1. For thermal treated sewage sludge and struvite the EOF were lower with values up to 121 mg kg−1. Moreover, the application of PFAS targeted and suspect screening analysis of selected sewage sludge samples showed that only a small part of the EOF sum parameter values can be explained by the usually screened legacy PFAS. The hitherto unknown part of EOF sum parameter contains also fluorinated pesticides, pharmaceutical and aromatic compounds. Because these partly fluorinated compounds can degrade to (ultra-)short PFAS in wastewater treatment plants they should be considered as significant sources of organic fluorine in the environment. The combined results of sum parameter analysis and suspect screening reveal the need to update current regulations, such as the German fertilizer ordinance, to focus not solely on a few selected PFAS such as perfluorooctane sulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) but consider an additional sum parameter approach as a more holistic alternative. Moreover, diffusion gradient in thin-films (DGT) passive samplers were utilized as an alternative simplified extraction method for PFAS in solid wastewater-based fertilizers and subsequently quantified via combustion ion chromatography. However, the DGT method was less sensitive and only comparable to the EOF values of the fertilizers in samples with >150 mg kg−1, because of different diffusion properties for various PFAS, but also kinetic exchange limitations. KW - Combustion ion chromatography KW - Per- and polyfluoroalkyl substances (PFAS) KW - Sewage sludge KW - Fertilizer PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-583429 DO - https://doi.org/10.1039/d3va00178d SN - 2754-7000 VL - 2 IS - 10 SP - 1436 EP - 1445 PB - Royal Society of Chemistry (RSC) CY - London AN - OPUS4-58342 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Simon, Franz-Georg T1 - Durchführung von Ringversuchen zur Validierung der Normen E DIN 19528 und E DIN 19529 N2 - Um den Erfordernissen des Grundwasser- und Bodenschutzes zu entsprechen ist die Kenntnis des Elutionsverhaltens von Abfall- und Bodenmaterialien erforderlich, wenn diese z.B. zur Verwertung im Straßen- oder Landschaftsbau vorgesehen sind. Im Zusammenhang mit der Novellierung der Bundes-Bodenschutzverordnung und der Einführung der Ersatzbaustoffverordnung sowie in Auswertung der Ergebnisse des BMBF-Verbundvorhabens „Sickerwasserprognose“ wurden vom DIN-Normenaus-schuss Wasserwesen, Unterausschuss „Eluierungsverfahren“ zwei Verfahren zur Elution von Fest-stoffen erarbeitet, die im Oktober 2007 als Entwürfe veröffentlicht wurden. Dabei handelt es sich um ein Säulenperkolationsverfahren zur gemeinsamen Untersuchung des Elutionsverhaltens von orga-nischen und anorganischen Stoffen (E DIN 19528) und ein Schüttelverfahren mit einem Wasser-/ Feststoff-Verhältnis (W/F) von 2 l/kg zur Untersuchung der Elution von anorganischen Stoffen (E DIN 19529). Beide Verfahren sind für Bodenmaterialien und mineralische Abfälle mit einer Korngröße bis 32 mm vorgesehen. Für Normen die in Verordnungen zitiert werden sollen, ist eine Verfahrensvalidierung erforderlich. Im Rahmen dieses Vorhabens waren die Verfahrenskenndaten auf der Grundlage von Ringversuchen zu ermitteln. Zunächst wurden vier für die Verordnungen relevante Materialien (Hausmüllverbrennungs-asche, Recyclingbaustoff, Bodenmaterial, Stahlwerksschlacke) als Referenzmaterialien (RM) aufberei-tet. Die zu analysierenden Parameter wurden unter Berücksichtigung der Regelungsrelevanz in Abstimmung mit dem Auftraggeber ausgewählt. Die RM wurden gemeinsam mit Referenzlösungen an die 53 Teilnehmer der Ringversuche ausgegeben. Die statistische Auswertung der Ringversuchsergebnisse erfolgte nach DIN 38402-42, wobei der Gesamtmittelwert aller Teilneh-mer als Sollwert herangezogen wurde. Es konnte gezeigt werden, dass akzeptable Reproduzierbarkeiten für organische und anorganische Schadstoffe durch geeignete Vorgaben sowohl für Schütteltests als auch für Säulenversuche erzielt werden können. Dies gilt insbesondere unter Berücksichtigung des breiten Korngrößenspektrums der RM, der relativ hohen zugelassenen Toleranzen für das W/F bei den Säulenversuchen und des kurzen Bekanntheitsgrades der Normenentwürfe. Die ermittelten Verfahrenskenndaten finden Eingang in die abschließende Bearbeitung der Normen. KW - Verwertung KW - Abfallmaterialien KW - kontaminierter Boden KW - Auslaugungsverhalten KW - Eluierungsverfahren KW - Schütteltest KW - Säulenperkolationsversuch KW - Sickerwasserprognose KW - Standardisierung KW - Validierung KW - Ringversuche PY - 2008 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-354756 SP - 1 EP - 275 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-35475 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalbe, Ute A1 - Simon, Franz-Georg T1 - Potential use of incineration bottom ash in construction – Evaluation of the environmental impact N2 - Knowledge of the long-term leaching behavior of potentially harmful substances is crucial for the assessment of the environmental compatibility of reusing municipal solid-waste incineration bottom ash (MSWI BA) in construction, i.e., as a road base layer. BA fractions obtained from wet-processing aiming at the improvement of environmental quality were used to investigate the mobility of relevant substances. Eluates from laboratory-scaled leaching procedures (column percolation and lysimeters) were analyzed to learn about the long-term release of substances. Unsaturated conditions and artificial rainwater (AR) were used in the lysimeter tests to simulate field conditions. In addition, batch test eluates were generated at usual liquid-to-solid ratios (L/S) for compliance testing purposes. A variety of cations and anions was measured in the eluates. The wet treatment reduces the leaching of chloride and particularly sulfate by more than 60%. The release of typical contaminants for the treated MSWI BA such as the heavy metals Cu and Cr was well below 1% in the conducted leaching tests. An increase in the Sb concentration observed in the lysimeter experiments starting at L/S 0.75 L/kg and in the column experiment at L/S 4 L/kg is assumed to be related to decreasing concentrations of Ca and thus to the dissolution of sparingly soluble calcium antimonate. The same leaching mechanism applies with V, but the concentration levels observed are less critical regarding relevant limit values. However, on the long term the behavior of Sb could be problematic for the application of MSWI BA in construction. KW - MSWI bottom ash KW - Leaching KW - Batch tests KW - Lysimeter KW - Antimony PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-508421 DO - https://doi.org/10.1007/s12649-020-01086-2 SN - 1877-2641 VL - 11 IS - 12 SP - 7055 EP - 7065 PB - Springer AN - OPUS4-50842 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Franz-Georg A1 - Kalbe, Ute A1 - Bandow, Nicole T1 - Potential use of incineration bottom ash in construction – Evaluation of environmental impact N2 - The results from a long-term lysimeter experiment with incineration bottom ash irrigated with artificial rain are reported. Whereas chloride concentration dropped significantly, the release of antimony increased during the course of the experiment as a result of aging processes. T2 - 10th International Conference on the Environmental and Technical Implications of Construction with Alternative Materials, WASCON 2018 CY - Tampere, Finland DA - 06.06.2018 KW - Leaching KW - MSWI Bottom Ash KW - Lysimeter KW - Antimony PY - 2018 SN - 978-951-758-631-3 SN - 0356-9403 SP - 108 EP - 110 AN - OPUS4-45416 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Franz-Georg A1 - Kalbe, Ute T1 - Travelling Conference 2018, Impressionen über die Abfallwirtschaft in Südkorea, Vietnam und Australien N2 - Wie Länder mit ihren Abfällen umgehen, hängt nicht nur von der Wirtschaftskraft eines Landes ab. Selbst in einem reichen Land wie Australien werden unbehandelte Abfälle einfach deponiert. Im Rahmen der Travelling Conference, einer vom Bundesministerium für Bildung und Forschung (BMBF) geförderten Vortragsreihe, besuchten Fachleute die Länder Südkorea, Vietnam und Australien, um mit Experten vor Ort Fragestellungen aus der Abfallwirtschaft zu diskutieren. Zu den Schwerpunktthemen zählte die Steigerung der Ressourceneffizienz im Spannungsfeld von ökonomischen und umweltpolitischen Interessen. Eine Frage war beispielsweise die Bewertung der Umweltverträglichkeit von mineralischen Abfällen, wenn diese als Ersatzbaustoffe eingesetzt werden. In diesem Beitrag werden Ähnlichkeiten und Unterschiede bei der Entsorgung von Siedlungsabfällen, beim Recycling und bei der Bewertung der Umweltverträglichkeit der Wiederverwertung von Abfällen in den drei besuchten Ländern im Vergleich zu Deutschland aufgezeigt. Dabei ist man sich in Deutschland und den drei besuchten Ländern einig, dass die Abfallbeseitigung auf Deponien ohne Rückgewinnung von Ressourcen oder Energie die schlechteste Abfallentsorgungsoption ist. Einigkeit besteht auch darin, dass die Ziele einer nachhaltigen Abfallwirtschaft der Schutz der menschlichen Gesundheit und der Umwelt sowie die Schonung von Ressourcen sind. In allen drei Ländern werden große Mengen an mineralischen Abfällen erzeugt, die bei Nachweis der Umweltverträglichkeit einen Teil von natürlichem Sand und Kies für die Bauindustrie ersetzen könnten. Ähnlich wie in Deutschland werden recycelte Abfälle im Tiefbau jedoch nur in geringem Maße eingesetzt. Gründe dafür sind fehlende Behandlungsanlagen für mineralische Abfälle und Bedenken im Hinblick auf die Umweltverträglichkeit. KW - Abfallbehandlung KW - Ersatzbaustoffe KW - Abfalltrennung KW - Deponierung PY - 2018 SN - 1868-9531 VL - 31 IS - 4 SP - 4 EP - 10 PB - Rhombos-Verlag CY - Berlin AN - OPUS4-47124 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lopez Meza, Sarynna A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Simon, Franz-Georg T1 - Harmonization and validation of leaching standards - new developments in Germany N2 - This article presents a snapshot of key issues regarding characterization of granular waste materials with respect to their reuse as alternative construction materials, and the factors that need to be considered in their reutilization in order to comply with soil and groundwater protection regulations. KW - Column tests KW - Granular materials KW - Leaching protocols KW - Standardisation KW - Waste PY - 2008 DO - https://doi.org/10.2462/09670513.890 SN - 0967-0513 VL - 16 IS - 1 SP - 45 EP - 49 PB - EPP Publ. CY - Richmond AN - OPUS4-17376 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Berger, Wolfgang A1 - Kalbe, Ute A1 - Simon, Franz-Georg T1 - Analytik für Ersatzbaustoffe KW - Ersatzbaustoffe KW - Auslaugverfahren KW - Säulentest PY - 2008 SN - 0344-1733 SN - 1610-8256 VL - 32 IS - 9 SP - 26 EP - 28 PB - Vogel CY - Würzburg AN - OPUS4-17978 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Oliver A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Simon, Franz-Georg A1 - López Meza, S. T1 - Leaching experiments on the release of heavy metals and PAH from C&D waste and MSWI bottom ash N2 - Leaching tests are fundamental tools for the assessment of long-term impact of contaminated waste materials on the soil-groundwater pathway. Waste materials should be tested under conditions equal to their actual application in re-use scenarios to achieve reliable results. Since the standards for leaching procedures available on international level so far are either not validated or considered inadequate in respect to coarse grained materials, new standards had to be developed. Therefore column percolation and batch test procedures have been standardized and validated to enable their introduction to new German regulations concerning waste management. Practical aspects of the test procedures as well as the boundary conditions compared to the already existing standards will be described. Examples including round robin test results will be given to justify the selection of the new specifications. T2 - 2nd International conference on hazardous and industrial waste management CY - Chania, Crete, Greece DA - 2010-10-05 KW - Leaching KW - Bioavailability KW - Column tests KW - Batch tests PY - 2010 IS - Session A, A5.1. SP - 1 EP - 8 AN - OPUS4-22128 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute A1 - Krüger, Oliver A1 - Berger, Wolfgang A1 - Simon, Franz-Georg T1 - Source term determination by leaching procedures - new developments in Germany T2 - Global waste management symposium CY - San Antonio, TX, USA DA - 2010-10-03 KW - Elutionsverfahren KW - Abfall PY - 2010 SP - 1 EP - 11(?) AN - OPUS4-22256 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Simon, Franz-Georg T1 - Praktische Aspekte der Anwendung von Eluierungsverfahren nach DIN 19528 und DIN 19529 N2 - Im Zusammenhang mit der Novellierung der Bundes-Bodenschutzverordnung und der Einführung einer Ersatzbaustoffverordnung wurden vom DIN-Normenausschuss Wasserwesen, Unterausschuss "Eluierungsverfahren" zwei Verfahren zur Elution von Feststoffen erarbeitet. Dabei handelt es sich um ein Säulenperkolationsverfahren zur gemeinsamen Untersuchung des Elutionsverhaltens von organischen und anorganischen Stoffen und ein Schüttelverfahren mit einem Wasser-/Feststoff-Verhältnis (W/F) von 2 l/kg zur Untersuchung der Elution von anorganischen Stoffen. Beide Verfahren sind für Bodenmaterialien und mineralische Abfälle mit einer Korngröße bis 32 mm vorgesehen. Der Vergleich der Praktikabilität der beiden Elutionsverfahren soll zur Diskussion zu deren Einsatz im Rahmen der geplanten bundeseinheitlichen gesetzlichen Regelungen beitragen, welche gegenwärtig kontrovers geführt wird. KW - Kontaminierter Boden KW - Abfall KW - Eluierungsverfahren KW - Säulenversuche KW - Schüttelversuche KW - Quellstärkeermittlung KW - Leaching KW - Contaminated soil KW - Mineral waste KW - Column test KW - Batch test KW - Legislation PY - 2009 SN - 0942-3818 SN - 1864-8371 VL - 18 IS - 1 SP - 5 EP - 10 PB - Schmidt CY - Berlin AN - OPUS4-18947 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Simon, Franz-Georg T1 - Results of German ring tests on the vaildation of leaching standards for source term determination T2 - WASCON 2009 - Sustainable management of waste and recycled materials in construction CY - Lyon, France DA - 2009-06-03 KW - Ringversuche KW - Validierung Normen KW - Kontaminierter Boden KW - Abfall KW - Säulenversuche KW - Schüttelversuche PY - 2009 SP - 1 EP - 10(?) AN - OPUS4-19569 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Eckardt, Jürgen A1 - Simon, Franz-Georg T1 - Evaluation of leaching and extraction procedures for soil and waste N2 - Laboratory leaching tests may be used for source term determination as a basis for risk assessment for soil–groundwater pathways on contaminated sites. In order to evaluate different leaching procedures, batch extraction tests and percolation tests were performed using three reference materials produced from contaminated soil, demolition waste and municipal solid waste incinerator bottom ash. Emphasis was placed on the investigation of the leachability of the heavy metals copper and chromium, polycyclic aromatic hydrocarbons (PAHs) and the anions chloride and sulfate. Significant discrepancies between column experiments and batch/extraction tests were found for the release of PAHs and to a lesser extent for the heavy metals Cu and Cr. Additionally interlaboratory comparisons were conducted based on different leaching tests with the reference materials and evaluated using the criteria of comparability and reproducibility. The best reproducibility was achieved for all investigated substances in column tests. The reproducibility of batch tests was acceptable except for PAHs. The results from the experimental work will help establish standardized and feasible laboratory procedures as fundamental for substance specific risk assessment of contaminated sites. KW - Leaching procedures KW - Leachate prognosis KW - Source term determination KW - Risk assessment KW - Contaminated soil KW - Waste materials PY - 2008 DO - https://doi.org/10.1016/j.wasman.2007.03.008 SN - 0956-053X VL - 28 IS - 6 SP - 1027 EP - 1038 PB - Pergamon Press CY - New York, NY AN - OPUS4-17191 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Simon, Franz-Georg A1 - Kalbe, Ute A1 - Berger, Wolfgang ED - Milind V. Khire, ED - Alshawabkeh, Akram N. ED - Krishna R. Reddy, T1 - Waste characterization by leaching and extraction procedures KW - Leaching KW - Heavy metal release KW - Bottom ash PY - 2008 SN - 978-0-7844-0970-1 VL - 177 IS - Geotechnical Special Publication SP - 676 EP - 683 AN - OPUS4-17217 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kalbe, Ute A1 - Bandow, Nicole A1 - Holm, Olaf A1 - Simon, Franz-Georg T1 - Elutionsverhalten der Produkte eines alternativen Verfahrens zur Aufbereitung von HMVA N2 - Im Rahmen eines ZIM-geförderten Projektes wurde eine nass-mechanische Aufbereitung von Hausmüllverbrennungsasche (HMVA) hinsichtlich der Mengen und der Qualitäten generierter Fraktionen optimiert. Dabei standen besonders die Qualitäten der mineralischen Fraktionen, die mengenmäßig den größten Anteil darstellen, im Vordergrund, da sie für einen möglichen Einsatz als Baustoff nutzbar gemacht werden sollen. Insbesondere die Chlorid- und Sulfatgehalte sollten dafür reduziert werden. Durch die BAM wurde im Projekt u. a. die Freisetzung von umweltrelevanten Stoffen in den mineralischen Fraktionen untersucht. Dafür wurden Schütteleluate als Übereinstimmungstest und Eluate aus Lysimeterversuchen im Labormaßstab zur Bewertung des Langzeitverhaltens auf ihre Inhaltsstoffe analysiert. KW - Elutionsverhalten KW - HMVA KW - Ersatzbaustoff KW - Lysimeter PY - 2016 SN - 0039-2162 VL - 67 IS - 8 SP - 619 EP - 623 PB - Kirschbaum Verlag CY - Bonn AN - OPUS4-37213 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holm, Olaf A1 - Bandow, Nicole A1 - Kalbe, Ute A1 - Simon, Franz-Georg T1 - Innovative treatment trains of bottom ash (BA) from municipal solid waste incineration (MSWI) in Germany N2 - The industrial sector of bottom ash (BA) treatment from municipal solid waste incineration (MSWI) in Germany is currently changing. In order to increase the recovery rates of metals or to achieve a higher quality of mineral aggregates derived from BA, new procedures have been either implemented to existing plants or completely new treatment plants have been built recently. Three treatment trains, which are designated as entire sequences of selected processing techniques of BA, are introduced and compared. One treatment train is mainly characterized by usage of a high speed rotation accelerator whereas another is operating completely without crushing. In the third treatment train the BA is processed wet directly after incineration. The consequences for recovered metal fractions and the constitution of remaining mineral aggregates are discussed in the context of legislative and economical frameworks. Today the recycling or disposal options of mineral residues still have a high influence on the configuration and the operation mode of the treatment trains of BA despite of the high value of recovered metals. T2 - Sardinia 2015 - 15th International waste management and landfill symposium CY - S. Margherita di Pula, Cagliari, Italy DA - 05.10.2015 KW - MSWI KW - Bottom ash KW - Treatment train KW - High velocity impact crushing KW - Wet treatment KW - Recovery rates KW - Non-ferrous metals KW - Mineral aggragates KW - Recycling KW - Secondary construction material PY - 2015 SP - 1 EP - 11 AN - OPUS4-34936 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krüger, Oliver A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Simon, Franz-Georg A1 - Lopez Meza, Sarynna T1 - Leaching experiments on the release of heavy metals and PAH from soil and waste materials N2 - Leaching tests are fundamental tools for the assessment of long-term impact of contaminated waste materials on the soil-groundwater pathway. Experiments were carried out in the framework of standardization and validation of column percolation and batch test procedures, in particular concerning the stipulation of the experimental setup. The colloid release of column and batch experiments was compared and the influence of different column filling heights (12.5–50 cm) on the release of polycyclic aromatic hydrocarbons (PAH) from soil was studied, as well as the effect of varying contact times (2.5–16 h) on the release of chromium from construction and demolition (C&D) waste and municipal solid waste incineration (MSWI) bottom ash. The results indicate that filtration of the eluate, which is required for batch tests, does not always allow the simulation of the actual colloid amount in soil pore water. Medium column heights four times the inner diameter of the column seemed to provide reasonable equilibrium adjustment conditions and avoid major biodegradation. The release of chromium was only marginally affected by the contact time, varied between 0.115 and 0.150 mg/kg for demolition waste eluate at a liquid-to-solid ratio of approximately 5 L/kg. KW - Column tests KW - Batch tests KW - Waste materials KW - Leaching KW - Standardization PY - 2012 DO - https://doi.org/10.1016/j.jhazmat.2011.02.016 SN - 0304-3894 VL - 207-208 SP - 51 EP - 55 PB - Elsevier CY - Amsterdam AN - OPUS4-24030 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lopez Meza, Sarynna A1 - Kalbe, Ute A1 - Berger, Wolfgang A1 - Simon, Franz-Georg T1 - Effect of contact time on the release of contaminants from granular waste materials during column leaching experiments N2 - When reusing or disposing of contaminated granular waste materials there is a need to evaluate how the contaminants will interact on the pathway soil-groundwater and the effect this interaction will have on the surrounding environment. While column testing can provide a closer approximation to field percolation conditions than batch testing, there is still a need to develop column testing procedures that consider the requirements of practical testing time frames. This study evaluates the effect of different column contact times (2.5, 5, and 16 h) on the release of inorganic constituents from bottom ash and demolition waste, two commonly reused granular materials. Leaching data for representative constituents of concern, such as copper, chromium, sulfate and chloride, as well as pH and electrical conductivity was compared for all different contact times studied. Results for the materials investigated in this study showed that variations in contact time have no significant effect on the release of the selected constituents and leaching parameters at low liquid to solid ratios. However, after a liquid to solid ratio of 1 L/kg, the effect is more noticeable, and higher contact times show lower pH values as well as a reduction in the release of constituents of concern from bottom ash. In the case of demolition waste, the variation of contact time did not have a strong effect on the leaching behavior. KW - Leaching procedures KW - Standardisation KW - Column tests KW - Contact time KW - Granular materials KW - Waste PY - 2010 DO - https://doi.org/10.1016/j.wasman.2009.11.022 SN - 0956-053X VL - 30 IS - 4 SP - 565 EP - 571 PB - Pergamon Press CY - New York, NY AN - OPUS4-20934 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kalbe, Ute A1 - Vogel, Christian A1 - Simon, Franz-Georg T1 - Antimony in incineration bottom ash – Leaching behavior and conclusions for treatment processes N2 - Antimony (Sb) is used in industrial products mainly as flame retardant in plastic material. Due to such additives in plastics, about a half of Sb ends up in municipal solid waste incineration at the end-of-life and consequently in relevant amounts in the generated bottom ash. In contact with water, the initial leachability is low, as antimonates form sparingly soluble compounds with Ca2+. Following the carbonation of the incineration bottom ash (IBA) during the proceeding ageing the pH in the leachates decreases. With decreasing concentration of Ca in the eluate the solution equilibrium changes and antimonates dissolve. In Germany it is intended to regulate Sb in IBA with the planned implementation of the so called Mantelverordnung (MantelVO, containing provisions on the utilisation of mineral waste) in the near future. The limit values set in the draft might be critical for IBA and therefore pose a risk for the utilisation of the mineral fraction of IBA in the well-established recycling routes. T2 - SUM 2020 – 5th Symposium on Urban Mining and Circular Economy CY - Online meeting DA - 18.11.2020 KW - Bottom ash KW - Leaching KW - Antimony PY - 2020 SP - 1 EP - 4 AN - OPUS4-51622 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -