TY - CONF A1 - Schmidt, Wolfram T1 - Zum Einfluss von Fließmitteln auf die frühe Zementhydratation T2 - Vortragsreihe der Fakultät für Bauingenierwissenschaften der TU Graz CY - Graz, Austria DA - 2014-10-02 PY - 2014 AN - OPUS4-31687 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Zum Einfluss der Fließmittelmodifikation auf die Verarbeitungseigenschaften fließfähiger Betone - Hintergründe und Optimierungspotential T2 - betonbau.aktuell 2014 CY - Apolda, Germany DA - 2014-02-13 PY - 2014 AN - OPUS4-30831 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Supplementary Cementitious Materials and Admixtures - Part II: Admixtures for Concrete T2 - Totally Concrete East Africa 2014 CY - Dar es Salaam, Tansania DA - 2014-10-28 PY - 2014 AN - OPUS4-32331 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Supplementary Cementitious Materials an Admixtures - Part I: Supplementary Cementitious Materials T2 - Totally Concrete East Africa 2014 CY - Dar es Salaam, Tansania DA - 2014-10-28 PY - 2014 AN - OPUS4-32333 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten A1 - Haamkens, Frank T1 - Shewhart- und CUSUM-Kontrollkarten zur gleichzeitigen Prozesssteuerung und Konformitätsbewertung - Neue Nachweisverfahren der Konformität in der zukünftigen EN 206 N2 - Im Hinblick auf die Konformitätsbewertung der Druckfestigkeit von Beton wird es in der für 2014 geplanten Fassung der EN 206 signifikante Änderungen geben. Neben den bisher bekannten Verfahren werden auch sogenannte Kontrollkartensysteme als Konformitätsnachweis zugelassen. Dabei können beliebige Kontrollkartensysteme verwendet werden, sofern nachgewiesen werden kann, dass der maximale Durchschlupf (Average Outgoing Quality Limit, AOQL) 5 % beträgt. Im informativen Normenanhang werden zwei grundlegende Verfahren, das sogenannte Shewhart-Verfahren sowie das CUSUM-Verfahren (Cumulative Sum) beschrieben, welche beide die Forderung an das AOQL erfüllen. Kontrollkartensysteme sind eigentlich Werkzeuge zur Prozesssteuerung. Sie können effektiv dabei helfen, die Produktion technisch, ökonomisch und ökologisch zu optimieren. Allerdings sind Kontrollkarten deutlich komplexer in der Anwendung als die bisher normativ erfassten Methoden. Der vorliegende Beitrag stellt die neuen Verfahren und deren Besonderheiten anhand von Beispielen vor. Darüber hinaus werden der Zusatznutzen bei sachgerechter Anwendung im Vergleich und Vor- und Nachteile zu den bisherigen Verfahren dargestellt und diskutiert.-------------------------------------------------------------------------------------- With regard to the conformity assessment of the compressive strength of concrete, there will be significant changes in the EN 206, which is scheduled for publication in 2014. So called control chart systems will be approved supplementary to the existing methods. Any control chart can be used as long as the system can grant an average outgoing quality limit (AOQL) of 5 %. The informative appendix of the standard presents two fundamental control chart methods, the so called Shewhart method and the CUSUM method (cumulative sum), both of which fulfill the required AOQL. Control card systems are actually tools for process control. They can effectively help to optimise production processes technically, economically, and ecologically. However, control charts are much more complex to use than the methods known from the recently applied standard. This paper presents these new methods and their characteristics using examples. Furthermore, the additional benefit of these systems is illustrated and advantages and disadvantages are discussed in comparison to existing methods. KW - Konformität KW - Kontrollkarten KW - CUSUM KW - Shewhart KW - Qualitätssicherung KW - EN 206 KW - KUSUM KW - Conformity KW - Control charts KW - Quality control KW - AOQL KW - Bauausführung KW - Baustoffe KW - Allgemeines PY - 2014 DO - https://doi.org/10.1002/best.201400007 SN - 0005-9900 SN - 1437-1006 VL - 109 IS - 6 SP - 417 EP - 427 PB - Ernst CY - Berlin AN - OPUS4-30949 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Self-Compacting concrete-Past, Present and Futere T2 - Totally Concrete Expo Conference 2014 CY - Johannesburg, South Africa DA - 2014-05-26 PY - 2014 AN - OPUS4-30829 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Wolfram A1 - Priebe, Nsesheye Susan T1 - SCC: a solution to the challenges of concrete construction in Africa N2 - Concrete can play a major role in overcoming the challenges of construction in sub-Saharan Africa where various factors negatively affect the quality and durability of concrete structures. Self-compacting concrete (SCC) is a practical solution to separate concrete properties from these parameters. Conditions on most African construction sites militate against producing high-quality concrete; SCC’s exceptional workability outweighs any of its limitations. This article examines how to introduce robust, reliable, cost-efficient SCC into practice as a pre-mixed dry compound incorporating local materials like natural pozzolans, cassava starch and lignosulphonate. PY - 2014 SN - 1560-2710 N1 - Geburtsname von Priebe, Nsesheye Susan: Msinjili, N. S. - Birth name of Priebe, Nsesheye Susan: Msinjili, N. S. SP - 16 EP - 20 PB - Hypenica AN - OPUS4-32301 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sturm, Patrick A1 - Gluth, Gregor A1 - Schmidt, Wolfram A1 - Astorg, Adéle A1 - Kühne, Hans-Carsten A1 - Brouwers, H.J.H. T1 - Rheological properties of microsilica and sodium aluminate based one-part geopolymers compared to ordinary Portland cement N2 - One-part (“just-add-water”) geopolymers are a new dass of mineral binders that are produced without the use of alkaline activating Solutions. Compared to conventional geopolymers, i. e. those activated by highly alkaline Solutions, much less is known about the one-part geopolymers ’ microstructure and with regard to their rheology. In this work, the rheology of one-part geopolymers, produced from microsilica and sodium aluminate, with several SiO-flACOiratios and two different water/binder-ratios (w/b) were investigated qualitatively with a viscometer (mortar measuring cellj. Absolute values of plastic viscosity and yield stress were determined with a double gap measuring cell. In addition spread flow tests were conducted. The aim was to classify the early behavior of geopolymer pastes and to compare it to ordinary Portland cement (CEM 142.5 R) pastes. At moderate to high shear rates, the measured flow curves cotdd be fltted well by the Bingham model. With increasing silica content the yield stress increased. Up to a certain SiOi/Al2O3-ratio viscosity also increased with increasing silica content; however, at higher silica/alumina-ratios the viscosity decreased again. Higher w/b-ratios caused lower yield stresses and viscosities. Compared to Portland cement pastes, most of the considered geopolymers were signiflcantly stiffer. The results were further Interpreted in terms of pore solution viscosity and volume-based water to binder ratios (w/b) of the geopolymer pastes. T2 - 5th International Conference Non-Traditional Cement & Concrete CY - Brno, Czech Republic DA - 16.06.2014 KW - Alkali-activated binders KW - One-part geopolymers KW - Rheology PY - 2014 SN - 978-80-214-4867-4 SP - 71 EP - 74 AN - OPUS4-31159 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Quality Control in Concrete Production - Introduction of control chart systems and the new concept according to EN 206 T2 - Public Seminar at the University of Dar es Salaam CY - Dar es Salaam, Tansania DA - 2014-10-28 PY - 2014 AN - OPUS4-32332 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Quality Control in Concrete Production T2 - Public Seminar at the School of Civil and Environmental Engineering CY - Johannesburg, South Africa DA - 2014-05-29 PY - 2014 AN - OPUS4-30833 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -