TY - JOUR A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten T1 - EN 206:2014: Cusum method or mean value criterion? / EN 206:2014: Kusum-Verfahren oder Mittelwertkriterium? N2 - Für die Anforderungen an Beton für Gebäude und higenieurbauwerke gilt seil Juli 2014 die EN 206:2.014 anstelle der EN 206-1:2000. In diesem Zusammenhang werden .sogenannte Kontrollkarten für den Konfonnltätsniiehweis zugclassen. Die EN 2.06:2.014 bezeichnet die Verwendung ilcs Mittelwertkritcriuins als Methode B und die Verwen düng von Kontrollkarten als Methode C. Kontrollkarten auf Basis von kumulativen Summen (Kiisum) sind sehr effektive Methoden zur Produktionsstcuerung. Die Anwendung wird In BS 5703-2:2001 geregelt. In England. Südafrika und Australien sind Kusum-Kontrollkartensystcme int Alltag der Betonherstcller etabliert, allerdings dient deren Anwendung nicht dem konkreten Konfbrmitätsnachweis, sondern der Abstimmung einer stabilen und zugleich wirtschafllichcn Produktion. Eine Einführung von Kusum-basierten Kontrollkarten für die Konformitätsbewertung wirft insofern die berechtigte Frage auf, ob das Nachweissystem gleichwertig mit dem bewährten Mittelwertkriterium ist. Im vorliegenden Artikel sollen zunächst kurz die Funktionsweise und die Vorteile von Kusum-Kontrollkarien dargcstclll werden, bevor eine vergleichende Bewertung von Kusum-Mcthode und Mittclwcrtkriterium dun hgelührl wird. KW - EN 206:2014 KW - Cusum method KW - Mean value criterion PY - 2014 SN - 0373-4331 SN - 1865-6528 N1 - Sprachen: Deutsch/Englisch - Languages: German/English VL - 80 IS - 12 SP - 24 EP - 31 PB - Bauverl. CY - Gütersloh AN - OPUS4-33576 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Quality Control in Concrete Production - Introduction of control chart systems and the new concept according to EN 206 T2 - Public Seminar at the University of Dar es Salaam CY - Dar es Salaam, Tansania DA - 2014-10-28 PY - 2014 AN - OPUS4-32332 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Frisch- und Festbetonprüfungen - ausgewählte Hinweise aus der Prüfpraxis T2 - Fachtagung "Prüfen und Erhalten von Stahlbeton" CY - Berlin, Deutschland DA - 2014-10-09 PY - 2014 AN - OPUS4-31688 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Zum Einfluss von Fließmitteln auf die frühe Zementhydratation T2 - Vortragsreihe der Fakultät für Bauingenierwissenschaften der TU Graz CY - Graz, Austria DA - 2014-10-02 PY - 2014 AN - OPUS4-31687 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Wolfram T1 - Cement proficiency testing scheme for Africa T1 - Programm zur Eignungsprüfung von Zement in Afrika N2 - The German BAM Federal Institute for Materials Research and Testing in collaboration with the German Metrology Institute (PTB) are organising an Africa wide Proficiency Testing Scheme for the year 2014 on the testing of cement. The Pan-African Cement Proficiency Testing Scheme PACE-PTS is the second Africa-wide proficiency testing scheme after a first transaction in 2012/2013, where 26 private and public constniction materials testing laboratories from 20 African nations were registered. The testing Programme comprises testing of the major Chemical and physical properties of cement. The testing is conducted according to EN 196. The PACE-PTS is open for private and public laboratories in Africa and the registration is open until March 15, 2014. PY - 2014 SN - 0373-4331 SN - 1865-6528 N1 - Sprachen: Deutsch/Englisch - Languages: German/English VL - 80 IS - 3 SP - 4 PB - Bauverl. CY - Gütersloh AN - OPUS4-30828 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Supplementary Cementitious Materials an Admixtures - Part I: Supplementary Cementitious Materials T2 - Totally Concrete East Africa 2014 CY - Dar es Salaam, Tansania DA - 2014-10-28 PY - 2014 AN - OPUS4-32333 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Supplementary Cementitious Materials and Admixtures - Part II: Admixtures for Concrete T2 - Totally Concrete East Africa 2014 CY - Dar es Salaam, Tansania DA - 2014-10-28 PY - 2014 AN - OPUS4-32331 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Schmidt, Wolfram T1 - Design concepts for the robustness improvement of self-compacting concrete - Effects of admixtures and mixture components on the rheology and early hydration at varying temperatures N2 - In Europe a multi-national research project was initiated entitled “Rational Production and Improved Working Environment through Using Self-Compacting Concrete”, followed by another project entitled “Testing SCC”, which helped spreading the benefits of SCC to a wide range of appliers. This project was also the basis of a widely accepted European guideline on Self compacted concrete published by the European industry association bibm, CEMBUREAU, EFCA, EFNARC, ERMCO, which again builds the basis of the European standards for the testing of SCC (EN 12350, Parts 8 to 12) as well as for the actual modernisation of the European concrete standard EN 206-1. PY - 2014 SN - 978-90-386-3598-9 DO - https://doi.org/10.6100/IR771936 VL - 193 SP - 1 EP - 308 PB - Eindhoven University of Technology CY - Eindhoven, The Netherlands AN - OPUS4-30826 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten A1 - Haamkens, Frank T1 - Shewhart- und CUSUM-Kontrollkarten zur gleichzeitigen Prozesssteuerung und Konformitätsbewertung - Neue Nachweisverfahren der Konformität in der zukünftigen EN 206 N2 - Im Hinblick auf die Konformitätsbewertung der Druckfestigkeit von Beton wird es in der für 2014 geplanten Fassung der EN 206 signifikante Änderungen geben. Neben den bisher bekannten Verfahren werden auch sogenannte Kontrollkartensysteme als Konformitätsnachweis zugelassen. Dabei können beliebige Kontrollkartensysteme verwendet werden, sofern nachgewiesen werden kann, dass der maximale Durchschlupf (Average Outgoing Quality Limit, AOQL) 5 % beträgt. Im informativen Normenanhang werden zwei grundlegende Verfahren, das sogenannte Shewhart-Verfahren sowie das CUSUM-Verfahren (Cumulative Sum) beschrieben, welche beide die Forderung an das AOQL erfüllen. Kontrollkartensysteme sind eigentlich Werkzeuge zur Prozesssteuerung. Sie können effektiv dabei helfen, die Produktion technisch, ökonomisch und ökologisch zu optimieren. Allerdings sind Kontrollkarten deutlich komplexer in der Anwendung als die bisher normativ erfassten Methoden. Der vorliegende Beitrag stellt die neuen Verfahren und deren Besonderheiten anhand von Beispielen vor. Darüber hinaus werden der Zusatznutzen bei sachgerechter Anwendung im Vergleich und Vor- und Nachteile zu den bisherigen Verfahren dargestellt und diskutiert.-------------------------------------------------------------------------------------- With regard to the conformity assessment of the compressive strength of concrete, there will be significant changes in the EN 206, which is scheduled for publication in 2014. So called control chart systems will be approved supplementary to the existing methods. Any control chart can be used as long as the system can grant an average outgoing quality limit (AOQL) of 5 %. The informative appendix of the standard presents two fundamental control chart methods, the so called Shewhart method and the CUSUM method (cumulative sum), both of which fulfill the required AOQL. Control card systems are actually tools for process control. They can effectively help to optimise production processes technically, economically, and ecologically. However, control charts are much more complex to use than the methods known from the recently applied standard. This paper presents these new methods and their characteristics using examples. Furthermore, the additional benefit of these systems is illustrated and advantages and disadvantages are discussed in comparison to existing methods. KW - Konformität KW - Kontrollkarten KW - CUSUM KW - Shewhart KW - Qualitätssicherung KW - EN 206 KW - KUSUM KW - Conformity KW - Control charts KW - Quality control KW - AOQL KW - Bauausführung KW - Baustoffe KW - Allgemeines PY - 2014 DO - https://doi.org/10.1002/best.201400007 SN - 0005-9900 SN - 1437-1006 VL - 109 IS - 6 SP - 417 EP - 427 PB - Ernst CY - Berlin AN - OPUS4-30949 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - "Effektivität von Stabilisierern - Einfluss des Feststoffvolumenanteils und Wechselwirkung mit Fließmitteln - "Effectiveness of Stabilising Agents - Influence of the Solid Volume Fraction and Interactions with Superplasticizers" T2 - 23. Konferenz "Rheologische Messungen an Baustoffen" CY - Regensburg, Germany DA - 2014-03-12 PY - 2014 AN - OPUS4-30832 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -