TY - JOUR A1 - Uzoegbo, H.C. A1 - Bjegovic, D. A1 - Schmidt, Wolfram A1 - Kitobo, W. T1 - SCM potential in Africa KW - Africa KW - Cement KW - Supplementary cementitious materials PY - 2012 SN - 0263-6050 SN - 0308-8855 IS - August SP - 27 EP - 38 PB - Swan CY - Leatherhead AN - OPUS4-27176 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Wolfram A1 - Wend, Dirk A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - The influence of superplasticiser modifications on early hydration processes N2 - Self-compacting concrete (SCC) differs substantially from normal concrete as regards the quantity of superplasticiser dosage. The functionality of superplasticisers, based on the polycarboxylate ether (PCE) superplasticiser customary with SCC, is nowadays very well understood at construction material research level. However, knowledge concerning pertinent correlations does not always permeate practice to an equal extent. PCEs are extremely polymorphic as opposed to earlier superplasticiser groups, which still possess a considerable proportion of the superplasticiser market. The geometry of polymers can be adjusted individually to performance characteristics required for certain uses. Yet, in selecting a superplasticiser for its specified rheological properties, a very strong influence can equally be exerted simultaneously on the subsequent hydration process. The charge density of the PCE employed also plays a key role in connection with both rheology and early hydration. KW - Rheology KW - Early cement hydration KW - Polycarboxylate ether vicat KW - Shrinkage PY - 2012 SN - 1437-9023 VL - 4 SP - 64 EP - 69 PB - ad-media-Verl. CY - Köln AN - OPUS4-26355 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Barthel, Maria A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten T1 - Betontechnologische Ansätze zur Vermeidung innerstädtischer Hitzeinseln N2 - Die Versiegelung von Oberflächen, Bebauung und die Ausweitung städtischer Gebiete führen weltweit besonders in sonnenreichen Regionen zu innerstädtischen Hitzeinseln. Diese Flächen wirken als Wärmespeicher, so dass an Sonnentagen eine Temperaturdifferenz bis zu 10 K zwischen Stadt und umliegendem Land entstehen kann. Verstärkt wird dieser sogenannte Urban Heat Island Effect (UHIE) durch die meist direkte Abführung des anfallenden Regenwassers in die Kanalisation, wodurch eine Kühlung durch stetige Verdunstung unterbunden ist, Mit steigender Urbanisierung wächst auch die Bedeutung dieses Phänomens. Innerstädtische Hitzeinseln ziehen direkte wirtschaftliche und soziale Folgen nach sich, da hohe Temperaturen eine teure Klimatisierung der Städte bedingen. So entsteht ein erhöhter Verbrauch an Ressourcen sowie zusätzliche Abwärme. Das Wohlbefinden und die Gesundheit der Bevölkerung verschlechtern sich bei sehr hohen Temperaturen, was zu sinkender Leistungsfähigkeit und sogar zu einer erhöhten Sterberate führen kann. T2 - 18. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 12.09.2012 PY - 2012 SN - 978-3-00-034075-8 VL - 2 IS - 3.07 SP - 2-0042 EP - 2-0050 AN - OPUS4-26545 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - The African-European SPIN Network - Linking Experts to Foster Innovation in Cement and Concrete T2 - Workshop Cement and Concrete Technology at the University of the Witwaterand CY - Johannesburg, South Africa DA - 2012-09-07 PY - 2012 N1 - Geburtsname von Priebe, Nsesheye Susan: Msinjili, N. S. - Birth name of Priebe, Nsesheye Susan: Msinjili, N. S. AN - OPUS4-26728 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Rheology - The Key to Innovation in Concrete T2 - SPIN Meeting and Cement and Concrete Workshop CY - Dar Es Salaam, Tanzania DA - 2012-07-01 PY - 2012 AN - OPUS4-26400 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühne, Hans-Carsten A1 - Schmidt, Wolfram A1 - Priebe, Nsesheye Susan T1 - SPIN - Spearhead Network for Innovative, Clean and Safe Cement and Concrete Technologies N2 - Globally, cement and concrete experts are at the cutting-edge to sustainable, green, healthy but nonetheless high-performance concrete. Today concrete is not yet well established in Africa, which offers the unique opportunity to build up a cement and concrete market based on the highest available state of technology. As this industry needs high level expertise, a central issue in implementation of skilled technology is crosslinking research institutions and laboratories. It should not be neglected that concrete is a product with low transport ranges. This means that an improved concrete market mainly supports the local economy without exceeding financial drains to the international market. Thus it fosters the fight against poverty, which is an urgent need in most African countries. The project aims to cross-link experts with industry and policy making bodies, aiming to establish sustainable cement and concrete construction in Africa. KW - High-performance concrete KW - Cement technologies KW - Concrete technologies KW - Sustainable development PY - 2012 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-387428 N1 - Geburtsname von Priebe, Nsesheye Susan: Msinjili, N. S. - Birth name of Priebe, Nsesheye Susan: Msinjili, N. S. SP - 1 EP - 3 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-38742 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Wolfram A1 - Priebe, Nsesheye Susan A1 - Kühne, Hans-Carsten T1 - Optimising the rheology of concrete for sub-Saharan African boundary conditions / Optimierung der Rheologie von Beton für Rahmenbedingungen in Subsahara-Afrika N2 - Die Zement- und Betontechnologie in Afrika hat keine ähnlich lange Tradition wie viele Länder der nördlichen Hemisphäre. In vielen afrikanischen Ländern ist die Bauindustrie jedoch von Wachstum gekennzeichnet und hier werden Zement und Beton zukünftig zweifelsohne an Bedeutung gewinnen. KW - Africa KW - Cement KW - Concrete KW - Proficiency testing KW - Round robin PY - 2012 SN - 0373-4331 SN - 1865-6528 N1 - Sprachen: Deutsch/Englisch - Languages: German/English N1 - Geburtsname von Priebe, Nsesheye Susan: Msinjili, N. S. - Birth name of Priebe, Nsesheye Susan: Msinjili, N. S. VL - 78 IS - 09 SP - 60 EP - 67 PB - Bauverl. CY - Gütersloh AN - OPUS4-27338 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Meinel, M. A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten T1 - Betontechnologische Ansätze zur Erweiterung der Leistungsmerkmale von Betonpflastersteinen KW - Betonpflastersteine KW - Urban heat island effect PY - 2012 SN - 1439-7706 VL - 2 SP - 94 EP - 100 PB - ad-media-Verl. CY - Köln AN - OPUS4-27117 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Wolfram A1 - Hirya, N.N.M. A1 - Bjegovic, D. A1 - Uzoegbo, H.C. A1 - Kumaran, S.G. T1 - Cement technology in sub-Saharan Africa-practical and scientific experiences N2 - Sub-Saharan Africa is populated by more than half a billion people, and rapid urbanization is creating challenges in the areas of housing, roads, railways, power supply, dams and water pipelines — aspects of nfrastructure that are critical to the well being of the population. This situation indicates that cement and concrete will play a major role in the future construction technology in Africa, despite the fact that it does not have a long-lasting tradition over most of the continent. Although the continent is rich in natural resources for the production of mineral binder systems, many sub-Saharan African countries exhibit challenging boundary conditions, that have to be well understood in order to use cement and concrete technologies in a sustainable and reasonable way. KW - Africa KW - Cement KW - Technology transfer KW - SPIN PY - 2012 SN - 0002-7812 VL - 91 IS - 5 SP - 52 EP - 56 PB - American Ceramic Society CY - Westerville, Ohio AN - OPUS4-26075 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Wolfram A1 - Wend, Dirk A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Einfluss der Fließmittelmdoifikation auf Prozesse während der frühen Hydratation von selbstverdichtenden Bindemitteln N2 - Selbstverdichtender Beton (SVB) unterscheidet sich wesentlich von Normalbeton in der Höhe der Fließmitteldosierung. Die Funktionsweise von Fließmitteln auf Basis der für SVB üblichen Polycarboxylatether-Fließmittel (PCE) ist heutzutage in der bauchemischen Forschung sehr gut verstanden, allerdings dringt die Kenntnis über die Zusammenhänge nicht immer gleichermaßen umfangreich in die Praxis durch. Anders als frühere Fließmittelwirkgruppen, die auch heute noch einen wesentlichen Anteil am Fließmittelmarkt haben, sind PCEs äußerst vielgestaltig. Die Polymergeometrien können individuell auf die geforderten Leistungseigenschaften für bestimmte Anwendungen abgestimmt werden. Allerdings kann die Auswahl eines Fließmittels für spezifizierte rheologische Eigenschaften gleichsam den anschließenden Hydratationsprozess sehr stark beeinflussen. Der Ladungsdichte des verwendeten PCEs kommt dabei im Zusammenhang mit der Rheologie als auch der frühen Hydratation eine Schlüsselrolle zu. KW - Rheologie KW - Frühe Zementhydratation KW - Polycarboxylatether KW - Vicat KW - Schwinden PY - 2012 SN - 1439-7706 VL - 4 SP - 66 EP - 71 PB - ad-media-Verl. CY - Köln AN - OPUS4-26356 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -