TY - JOUR A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten T1 - EN 206:2014: Cusum method or mean value criterion? / EN 206:2014: Kusum-Verfahren oder Mittelwertkriterium? N2 - Für die Anforderungen an Beton für Gebäude und higenieurbauwerke gilt seil Juli 2014 die EN 206:2.014 anstelle der EN 206-1:2000. In diesem Zusammenhang werden .sogenannte Kontrollkarten für den Konfonnltätsniiehweis zugclassen. Die EN 2.06:2.014 bezeichnet die Verwendung ilcs Mittelwertkritcriuins als Methode B und die Verwen düng von Kontrollkarten als Methode C. Kontrollkarten auf Basis von kumulativen Summen (Kiisum) sind sehr effektive Methoden zur Produktionsstcuerung. Die Anwendung wird In BS 5703-2:2001 geregelt. In England. Südafrika und Australien sind Kusum-Kontrollkartensystcme int Alltag der Betonherstcller etabliert, allerdings dient deren Anwendung nicht dem konkreten Konfbrmitätsnachweis, sondern der Abstimmung einer stabilen und zugleich wirtschafllichcn Produktion. Eine Einführung von Kusum-basierten Kontrollkarten für die Konformitätsbewertung wirft insofern die berechtigte Frage auf, ob das Nachweissystem gleichwertig mit dem bewährten Mittelwertkriterium ist. Im vorliegenden Artikel sollen zunächst kurz die Funktionsweise und die Vorteile von Kusum-Kontrollkarien dargcstclll werden, bevor eine vergleichende Bewertung von Kusum-Mcthode und Mittclwcrtkriterium dun hgelührl wird. KW - EN 206:2014 KW - Cusum method KW - Mean value criterion PY - 2014 SN - 0373-4331 SN - 1865-6528 N1 - Sprachen: Deutsch/Englisch - Languages: German/English VL - 80 IS - 12 SP - 24 EP - 31 PB - Bauverl. CY - Gütersloh AN - OPUS4-33576 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Quality Control in Concrete Production - Introduction of control chart systems and the new concept according to EN 206 T2 - Public Seminar at the University of Dar es Salaam CY - Dar es Salaam, Tansania DA - 2014-10-28 PY - 2014 AN - OPUS4-32332 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Frisch- und Festbetonprüfungen - ausgewählte Hinweise aus der Prüfpraxis T2 - Fachtagung "Prüfen und Erhalten von Stahlbeton" CY - Berlin, Deutschland DA - 2014-10-09 PY - 2014 AN - OPUS4-31688 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Zum Einfluss von Fließmitteln auf die frühe Zementhydratation T2 - Vortragsreihe der Fakultät für Bauingenierwissenschaften der TU Graz CY - Graz, Austria DA - 2014-10-02 PY - 2014 AN - OPUS4-31687 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Wolfram T1 - Cement proficiency testing scheme for Africa T1 - Programm zur Eignungsprüfung von Zement in Afrika N2 - The German BAM Federal Institute for Materials Research and Testing in collaboration with the German Metrology Institute (PTB) are organising an Africa wide Proficiency Testing Scheme for the year 2014 on the testing of cement. The Pan-African Cement Proficiency Testing Scheme PACE-PTS is the second Africa-wide proficiency testing scheme after a first transaction in 2012/2013, where 26 private and public constniction materials testing laboratories from 20 African nations were registered. The testing Programme comprises testing of the major Chemical and physical properties of cement. The testing is conducted according to EN 196. The PACE-PTS is open for private and public laboratories in Africa and the registration is open until March 15, 2014. PY - 2014 SN - 0373-4331 SN - 1865-6528 N1 - Sprachen: Deutsch/Englisch - Languages: German/English VL - 80 IS - 3 SP - 4 PB - Bauverl. CY - Gütersloh AN - OPUS4-30828 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Supplementary Cementitious Materials an Admixtures - Part I: Supplementary Cementitious Materials T2 - Totally Concrete East Africa 2014 CY - Dar es Salaam, Tansania DA - 2014-10-28 PY - 2014 AN - OPUS4-32333 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Supplementary Cementitious Materials and Admixtures - Part II: Admixtures for Concrete T2 - Totally Concrete East Africa 2014 CY - Dar es Salaam, Tansania DA - 2014-10-28 PY - 2014 AN - OPUS4-32331 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Schmidt, Wolfram T1 - Design concepts for the robustness improvement of self-compacting concrete - Effects of admixtures and mixture components on the rheology and early hydration at varying temperatures N2 - In Europe a multi-national research project was initiated entitled “Rational Production and Improved Working Environment through Using Self-Compacting Concrete”, followed by another project entitled “Testing SCC”, which helped spreading the benefits of SCC to a wide range of appliers. This project was also the basis of a widely accepted European guideline on Self compacted concrete published by the European industry association bibm, CEMBUREAU, EFCA, EFNARC, ERMCO, which again builds the basis of the European standards for the testing of SCC (EN 12350, Parts 8 to 12) as well as for the actual modernisation of the European concrete standard EN 206-1. PY - 2014 SN - 978-90-386-3598-9 DO - https://doi.org/10.6100/IR771936 VL - 193 SP - 1 EP - 308 PB - Eindhoven University of Technology CY - Eindhoven, The Netherlands AN - OPUS4-30826 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - "Effektivität von Stabilisierern - Einfluss des Feststoffvolumenanteils und Wechselwirkung mit Fließmitteln - "Effectiveness of Stabilising Agents - Influence of the Solid Volume Fraction and Interactions with Superplasticizers" T2 - 23. Konferenz "Rheologische Messungen an Baustoffen" CY - Regensburg, Germany DA - 2014-03-12 PY - 2014 AN - OPUS4-30832 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Zum Einfluss der Fließmittelmodifikation auf die Verarbeitungseigenschaften fließfähiger Betone - Hintergründe und Optimierungspotential T2 - betonbau.aktuell 2014 CY - Apolda, Germany DA - 2014-02-13 PY - 2014 AN - OPUS4-30831 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Self-Compacting concrete-Past, Present and Futere T2 - Totally Concrete Expo Conference 2014 CY - Johannesburg, South Africa DA - 2014-05-26 PY - 2014 AN - OPUS4-30829 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Quality Control in Concrete Production T2 - Public Seminar at the School of Civil and Environmental Engineering CY - Johannesburg, South Africa DA - 2014-05-29 PY - 2014 AN - OPUS4-30833 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Wolfram A1 - Priebe, Nsesheye Susan T1 - SCC: a solution to the challenges of concrete construction in Africa N2 - Concrete can play a major role in overcoming the challenges of construction in sub-Saharan Africa where various factors negatively affect the quality and durability of concrete structures. Self-compacting concrete (SCC) is a practical solution to separate concrete properties from these parameters. Conditions on most African construction sites militate against producing high-quality concrete; SCC’s exceptional workability outweighs any of its limitations. This article examines how to introduce robust, reliable, cost-efficient SCC into practice as a pre-mixed dry compound incorporating local materials like natural pozzolans, cassava starch and lignosulphonate. PY - 2014 SN - 1560-2710 N1 - Geburtsname von Priebe, Nsesheye Susan: Msinjili, N. S. - Birth name of Priebe, Nsesheye Susan: Msinjili, N. S. SP - 16 EP - 20 PB - Hypenica AN - OPUS4-32301 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Einfluss der Fließmittelmodifikation auf die Verarbeitungseigenschaften fließfähiger Betone - Hintergründe und Optimierungspotential N2 - Durch die Möglichkeit, die Konsistenz weitgehend vom Wasserzementwert zu entkoppelt, stellen verflüssigende Zusatzmittel ein starkes Werkzeug zur Verbesserung der Betontechnologie dar. Deswegen ermöglichen auch erst neuere Entwicklungen im Bereich der Fließmittel betontechnologische Innovationen wie den selbstverdichtenden Beton, hochfesten und ultrahochfesten Beton. Eine besondere Bedeutung haben Polycarboxylatether-Fließmittel. Diese sind in einer sehr großen Vielfalt und mit einer großen Bandbreite an Leistungseigenschaften am Markt erhältlich. Allerdings werden aufgrund der Vielseitigkeit Betone mit hohen Fließmittelgehalten auch sehr anfällig gegenüber äußeren Einflüssen, so dass Veränderungen in den Umgebungsbedingungen ungewünschte Effekte hervorrufen können. Folglich erfordern Betone mit Rießmitteln ein hohes Maß an Expertise, die nicht immer in der Praxis vorhanden ist. Der vorliegende Artikel gibt einen Überblick über die Wirkungsweisen von Fließmitteln und wie deren Leistungseigenschaften genutzt werden kann, um betontechnologische Fragestellungen optimal zu lösen. T2 - Fachtagung Betonbau aktuell 2014 CY - Apolda, Germany DA - 13.02.2014 PY - 2014 SP - 1 EP - 7 AN - OPUS4-30945 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Paul, S. C. A1 - Ebell, Gino A1 - Van Zijl, G. P. A. G. A1 - Schmidt, Wolfram ED - Schlangen, E. ED - Sierra Beltran, M.G. ED - Lukovic, M. ED - Ye, G. T1 - Cracked and uncracked SHCC specimens under different exposure conditions N2 - This paper describes the fibre-reinforced strain hardening cement-based composite (SHCC) performance under various exposure conditions. Cracked and uncracked SHCC beam specimens were subjected to cyclic wetting and drying under chloride exposure to observe the time of depassivation and corrosion potential of the imbedded reinforcement. Two reference mortars, one of the same strength class as the SHCC (Mortar 1) and the other of high strength class (Mortar 2) were used under the same conditions. Finally, tests for determining the rapid chloride migration coefficient, electrical resistivity, capillary water absorption and freezethaw were also performed to observe the corrosion probability and diffusion rate in uncracked SHCC and mortars. T2 - SHCC3 - 3rd International RILEM conference on strain hardening cementitious composites CY - Dordrecht, The Netherlands DA - 03.11.2014 KW - Depassivation KW - SHCC corrosion crack KW - Lochkorrosion KW - Betonstahl PY - 2014 SN - 978-2-35158-150-6 SN - 978-2-35158-151-3 SP - 25 EP - 32 AN - OPUS4-32462 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - PACE PTS-Africa wide proficiency testing scheme for the testing of cement T2 - Totally Concrete Conference 2014 CY - Johannesburg, South Africa DA - 2014-05-27 PY - 2014 AN - OPUS4-30830 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sturm, Patrick A1 - Gluth, Gregor A1 - Schmidt, Wolfram A1 - Astorg, Adéle A1 - Kühne, Hans-Carsten A1 - Brouwers, H.J.H. T1 - Rheological properties of microsilica and sodium aluminate based one-part geopolymers compared to ordinary Portland cement N2 - One-part (“just-add-water”) geopolymers are a new dass of mineral binders that are produced without the use of alkaline activating Solutions. Compared to conventional geopolymers, i. e. those activated by highly alkaline Solutions, much less is known about the one-part geopolymers ’ microstructure and with regard to their rheology. In this work, the rheology of one-part geopolymers, produced from microsilica and sodium aluminate, with several SiO-flACOiratios and two different water/binder-ratios (w/b) were investigated qualitatively with a viscometer (mortar measuring cellj. Absolute values of plastic viscosity and yield stress were determined with a double gap measuring cell. In addition spread flow tests were conducted. The aim was to classify the early behavior of geopolymer pastes and to compare it to ordinary Portland cement (CEM 142.5 R) pastes. At moderate to high shear rates, the measured flow curves cotdd be fltted well by the Bingham model. With increasing silica content the yield stress increased. Up to a certain SiOi/Al2O3-ratio viscosity also increased with increasing silica content; however, at higher silica/alumina-ratios the viscosity decreased again. Higher w/b-ratios caused lower yield stresses and viscosities. Compared to Portland cement pastes, most of the considered geopolymers were signiflcantly stiffer. The results were further Interpreted in terms of pore solution viscosity and volume-based water to binder ratios (w/b) of the geopolymer pastes. T2 - 5th International Conference Non-Traditional Cement & Concrete CY - Brno, Czech Republic DA - 16.06.2014 KW - Alkali-activated binders KW - One-part geopolymers KW - Rheology PY - 2014 SN - 978-80-214-4867-4 SP - 71 EP - 74 AN - OPUS4-31159 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -