TY - JOUR A1 - Schmidt, Wolfram T1 - Wirkungsweise verschiedener Fließmittel N2 - In den vergangenen Jahrzehnten hat sich die Betonbauweise beträchtlich von einer Massenanwendung hin zu einer innovativeren, zukunfts- und leistungsorientierten Werkstofftechnologie weiterentwickelt. Heutzutage besteht Beton nicht mehr länger nur aus Zement, Wasser und Gesteinskörnungen, sondern kann unter Anwendung von Zusatzstoffen und chemischen Zusatzmitteln erheblich verbessert werden. Gleichzeitig beschränken die Betonspezifikationen sich nicht mehr auf den Elastizitätsmodul und Druckfestigkeit, sondern Beton kann ebenfalls zur Erfüllung zahlreicher Anwendungskriterien wie Dauerhaftigkeit, Verarbeitbarkeit, Ästhetik, Brandverhalten und vieler anderer mehr beitragen. Gleichzeitig ist jedoch die Zusammensetzung von Beton wegen der Vielzahl an interagierenden Mischungskomponenten komplizierter geworden. Das Verständnis der Auswirkungen der veränderten Mischungskomponenten ist eine Herausforderung, aber auch der Schlüssel zu einer innovativen Betontechnologie. PY - 2015 SN - 1439-7706 VL - 3 SP - 2 EP - 6 PB - ad-media-Verl. CY - Köln AN - OPUS4-33727 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Sustainable cement extenders and SCMs T2 - Totally Concrete Expo CY - Johannesburg, South Africa DA - 2015-05-12 PY - 2015 AN - OPUS4-33564 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Supplementary cementitious materials for sustainable and economic binders - European solutions compared to African solutions T2 - PACE-PTS Public Symposium on Cement and Concrete-related Issues for the African Market CY - Dar es Saalam, Tanzania DA - 2015-02-26 PY - 2015 AN - OPUS4-33562 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Wolfram T1 - Steuerung der Mischung N2 - Seit den 1980er Jahren hat sich die Auswahl der zur Modifizierung des Verhaltens und der Leistungsfähigkeit von Beton erhältlichen Zusätzen erheblich verbreitet. Für viele Anwendungen ist die Steuerung der Rheologie PY - 2015 SN - 0014-7699 IS - 5 SP - 50 EP - 55 PB - Vincentz CY - Hannover AN - OPUS4-33577 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Process Control of the Rheology of Self-Compacting Concrete Based on Cusum Control Charts T2 - 23. Workshop und Kolloquium "Rheologische Messungen an Baustoffen", Regensburg 2015 CY - Regensburg, Germany DA - 2015-03-11 PY - 2015 AN - OPUS4-33565 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Parameters that affect the workability of fresh concrete from nano- to centimetrescale T2 - 2015 SEMINAR SERIES No. 4 School of Civil & Environmental Engineering - University of the Witwatersand CY - Johannesburg, South Africa DA - 2015-05-14 PY - 2015 AN - OPUS4-33563 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram ED - Priebe, Nsesheye Susan ED - Schmidt, Wolfram T1 - Parameters controlling superplasticizer cement interactions during the casting and hardening of cement based systems N2 - Concrete of today has only little in common with the traditional concrete used a few decades ago. It has become a high performance material, which can be adjusted for high performance applications and according to ultimate user specifications. The reason for the rapid evolvement was the increasing awareness about how the rheology of concrete can be improved without negatively affecting the mechanical properties of concrete by chemical admixtures. T2 - KEYS 2015 - 1st Symposium Knowledge Exchange for Young Scientists CY - Dar es Salaam, Tanzania DA - 09.06.2015 KW - Superplasticizers KW - Rheology KW - Cement hydration KW - Setting PY - 2015 SN - 978-3-9817149-3-7 N1 - Geburtsname von Priebe, Nsesheye Susan: Msinjili, N. S. - Birth name of Priebe, Nsesheye Susan: Msinjili, N. S. SP - 31 EP - 35 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-33578 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Vasilic, Ksenija A1 - Schmidt, Wolfram A1 - Kühne, Hans-Carsten A1 - Roussel, N. T1 - Numerical modelling of SCC flow through reinforced sections T1 - Numerische Simulation des Fließverhaltens von SVB durch bewehrte Querschnitte N2 - The study introduces the porous medium model for the simulation of concrete flow through highly-reinforced sections. It shows that numerical simulations can predict concrete behavior during casting and help to avoid expensive mistakes. N2 - Bei der hier dargestellten Untersuchung wird das Modell des porösen Mediums auf die Simulation des Fließverhaltens von Beton durch Querschnitte mit hohem Bewehrungsgrad angewandt. Dabei zeigt sich, dass mit Hilfe numerischer Simulationen das Verhalten des Betons während der Betonage prognostiziert und kostspielige Fehler vermieden werden können. PY - 2015 SN - 0373-4331 SN - 1865-6528 N1 - Sprachen: Deutsch/Englisch - Languages: German/English VL - 81 IS - 03 SP - 50 EP - 55 PB - Bauverl. CY - Gütersloh AN - OPUS4-33151 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram T1 - Mode of operation of polysaccharide stabilising agents in cement based systems and interactions with superplasticisers T2 - ICBBM - 1st International Conference on Bio-Based Materials CY - Clermont-Ferrand, France DA - 2015-06-21 PY - 2015 AN - OPUS4-33560 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram ED - Amziane, Sofiane ED - Sonebi, M. ED - Charlet, K. T1 - Mode of operation of polysaccharide stabilising agent in cement based systems and interactions with superplasticisers N2 - Polysaccharides are incorporated into cement based systems in order to modify the rheological properties. Typically cellulose ethers, sphingan gums or starch ethers are applied. Depending upon their chemistry, molecular architecture, and adsorption tendency, polysaccharides interact differently with the entire cementitious system. Some stabilising agents like diutan gum mainly affect the cementitious paste; other stabilising agents like starch tend to interact with the sand fraction and even with the coarse aggregates. Cellulose shows more divers performances. Often stabilising admixtures like polysaccharides are used, when sophisticated rheological properties are adjusted. Therefore, polysaccharides are often used in combination with superplasticisers. This can cause interactions, particularly when the stabilising agent shows a strong tendency to adsorb on particle surfaces. Adsorptive stabilising agents may reduce the amount of adsorbed superplasticisers, thus affecting both viscosity and yield stress, while non-adsorptive stabilising agents mainly affect the plastic viscosity independently of the superplasticiser. Due to the strong influence of superplasticisers on the yield stress, influences of the stabilising agent on the yield stress retreat into the background, so that their major effect is an increase of the viscosity. The paper provides a comprehensive overview of how different polysaccharide superplasticisers affect cementitious flowable systems and points out the challenges of the combined use of polysaccharides and superplasticisers. Based on rheometric experiments and Observations of the hydration process, time dependent effects on the workability as well as of the hydration of cement are presented. T2 - ICBBM 2015 - 1st International conference on bio-based building materials CY - Clermont-Ferrand, France DA - 22.06.2015 KW - Corrosion potential KW - Chloride migration KW - Electrical resistivity KW - Water absorption KW - Freeze-thaw PY - 2015 SN - 978-2-35158-154-4 N1 - Serientitel: Rilem proceedings – Series title: Rilem proceedings IS - PRO 99 SP - 100 EP - 106 AN - OPUS4-33582 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -