TY - CONF A1 - Rosemann, P. A1 - Bender, S. A1 - Heyn, Andreas A1 - Schmidt, J. T1 - Korrosion and Biokompatibilität beschichteter MgCa1,0 Magnesiumlegierungen T2 - 14. Sommerkurs Werkstoffe und Fügen am Institut für Werkstoff- und Fügetechnik N2 - Die Magnesiumlegierung Mg-Cal besitzt als potentielles bioabsorbierbares Implantatmaterial die Möglichkeit, vollständig vom menschlichen Körper absorbiert zu werden. Die mechanischen Kennwerte dieser Legierung liegen im Bereich des menschlichen Knochens und beide Legierungselemente (Mg, Ca) sind essentielle Spurenelemente im menschlichen Organismus. Der limitierende Faktor für den Einsatz ist die hohe Degradationsrate dieser Legierung. Um die Degradationsgeschwindigkeit zu verringern, wurden zwei Beschichtungssysteme auf Grundlage der Plasmachemischen Oxidation (PCO) und organischer Beschichtung erzeugt und untersucht. Das Korrosionsverhalten dieser Schichtsysteme wurde dabei mit dem Elektrochemischen Rauschen analysiert. Zusätzlich wurde der Einfluss von Wasserstoffentwicklung und eines ansteigenden pHWert auf die Zelltoxizität untersucht. Die Ergebnisse zeigen, dass eine Kombination von beiden Schichtsystemen zu einem viel versprechenden Degradationsverhalten führt. T2 - 14. Sommerkurs Werkstoffe und Fügen am Institut für Werkstoff- und Fügetechnik CY - Magdeburg, Germany DA - 23.09.2011 KW - Magnesium KW - Magnesium-Calcium KW - Implantat KW - Beschichtung KW - Plasmachemische Oxidation KW - Korrosion KW - Elektrochemisches Rauschen PY - 2011 SN - 978-3-940961-56-3 SP - 135 EP - 138 AN - OPUS4-24491 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bender, S. A1 - Göllner, J. A1 - Heyn, Andreas A1 - Heilmaier, M. A1 - Schmidt, J. ED - Kainer, K.U. T1 - Basic examinations of pre-treatment and coating of magnesium alloys T2 - Magnesium T2 - 8th International conference on magnesium alloys and their applications CY - Weimar, Germany DA - 2009-10-26 KW - Magnesium KW - Korrosion KW - Beschichtung KW - Vorbehandlung KW - Elektrochemisches Rauschen PY - 2010 SN - 978-3-527-32732-4 SP - 1323 EP - 1330 PB - Wiley-VCH AN - OPUS4-20743 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmigalla, S. A1 - Bender, S. A1 - Heyn, Andreas A1 - Schmidt, J. A1 - Hort, N. T1 - Investigation of biodegradation behaviour of an Mg-1Ca alloy influenced by heat treatment and applying plasma-chemical oxidation layers JF - Materials and corrosion N2 - The degradation behaviour of an Mg-1Ca alloy is investigated in vitro to figure out the possibilities of influencing the degradation behaviour of such an alloy by applying heat treatment as well as the use of a coating system based on plasma-chemical oxidation. It is shown that an optimised solution annealing (T4-heat treatment) can reduce the degradation rate while an additional ageing between 240 and 300 °C (T6-heat treatment) increases it. A coating generated by plasma-chemical oxidation reduces the degradation rate in the immersion test. Its effect is depending on the former heat treatment of the Mg-1Ca alloy as well as on the parameter during plasma-chemical oxidation. KW - Biodegradation KW - Magnesium alloys KW - Plasma-chemical oxidation KW - Magnesium KW - Thermal treatment KW - Corrosion KW - Electrochemistry PY - 2013 DO - https://doi.org/10.1002/maco.201106433 SN - 0947-5117 SN - 1521-4176 VL - 64 IS - 7 SP - 578 EP - 584 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-28933 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rosemann, P. A1 - Bender, S. A1 - Heyn, Andreas A1 - Schmidt, J. T1 - In vitro corrosion and biocompatibility of coated MgCa1.0 magnesium alloys JF - Materials science forum N2 - As bio-absorbable implant material the magnesium alloy Mg-1Ca is able to degrade in-vivo. The mechanical properties of this alloy are similar to those of human bone; both Mg and Ca are essential elements in human body. The main problem is the high corrosion rate of this alloy. Two coating systems based on plasma-chemical oxidation and an organic dip coating are applied onto MgCa1.0 magnesium alloy in order to slow down the corrosion rate. The corrosion behaviour of the coated alloys was investigated with electrochemical noise measurements. The influence of hydrogen evolution and increasing pH-value on the cytotoxicity was examined. The results of these investigations suggest that a combination of both coating systems leads to promising degradation properties. KW - Biocompatibility KW - Biodegradation KW - Magnesium KW - Plasma-Chemical Oxidation PY - 2011 DO - https://doi.org/10.4028/www.scientific.net/MSF.690.409 SN - 0255-5476 VL - 690 SP - 409 EP - 412 PB - Trans Tech Publications CY - Aedermannsdorf, Switzerland AN - OPUS4-23875 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -