TY - JOUR A1 - Naka, A. A1 - Yasutaka, T. A1 - Sakanakura, H. A1 - Kalbe, Ute A1 - Watanabe, Y. A1 - Inoba, S. A1 - Takeo, M. A1 - Inui, T. A1 - Katsumi, T. A1 - Fujikawa, T. A1 - Sato, K. A1 - Higashinog, K. A1 - Someyaga, M. T1 - Column percolation test for contaminated soils: Key factors for standardization N2 - Column percolation tests may be suitable for prediction of chemical leaching from soil and soil materials. However, compared with batch leaching tests, they are time-consuming. It is therefore important to investigate ways to shorten the tests without affecting the quality of results. In this study, we evaluate the feasibility of decreasing testing time by increasing flow rate and decreasing equilibration time compared to the conditions specified in ISO/TS 21268-3, with equilibration periods of 48 h and flow rate of 12 mL/h. We tested three equilibration periods (0, 12–16, and 48 h) and two flow rates (12 and 36 mL/h)on four different soils and compared the inorganic constituent releases. For soils A and D, we observed similar values for all conditions except for the 0 h–36 mL/h case. For soil B, we observed no appreciable differences between the tested conditions, while for soil C there were no consistent trends probably due to the difference in ongoing oxidation reactions between soil samples. These results suggest that column percolation tests can be shortened from 20 to 30 days to 7–9 days by decreasing the equilibration time to 12–16 h and increasing the flow rate to 36 mL/h for inorganic substances. KW - Contaminated soils KW - Column percolation PY - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-372038 SN - 0304-3894 VL - 320 SP - 326 EP - 340 PB - Elsevier B.V. AN - OPUS4-37203 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Yasutaka, T. A1 - Imoto, Y. A1 - Kurosawa, A. A1 - Someya, M. A1 - Higashino, K. A1 - Kalbe, Ute A1 - Sakanakura, H. T1 - Effects of colloidal particles on the results and reproducibility of batch leaching tests for heavy metal-contaminated soil N2 - A simple batch test leaching procedure is used in many countries, as a compliance test, to evaluate the leaching of mainly inorganic substances from soil. However, agitating certain types of soil and then passing the solution through a membrane filter with 0.45-µm pores yields filtrates that have been colored by the colloidal particles. These colloids might affect the results of the inorganic substances obtained in the batch tests. In this study, we evaluated the effects of colloidal particles on the results and the reproducibility of batch tests on contaminated soil using different agitation methods and membrane filters with different pore sizes. The leaching behaviors of As, Pb, Se, F and Cl from three types of soil were studied. The As and Pb concentrations in the leachates of some types of soil were clearly affected by the amount of colloidal particles with a diameter of 0.10–0.45 µm and by the agitation method used. This was probably because As and Pb were present mainly in the particulate form in the leachate that had been passed through a membrane filter with 0.45-µm pores. This is not the case for every type of soil. The results of batch leaching tests showed that not only dissolved but also colloidal forms with a diameter of 0.10–0.45 µm might be included and that the existence of colloidal particles in the leachate decreases the batch leaching test reproducibility. KW - Leaching KW - Contaminated soil KW - Heavy metals KW - Colloids PY - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-429940 UR - https://www.sciencedirect.com/science/article/pii/S0038080617301166#! SN - 0038-0806 VL - 57 IS - 5 SP - 861 EP - 871 PB - Elsevier B.V. AN - OPUS4-42994 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -