TY - JOUR A1 - Rybachuk, Maksym A1 - Hertwig, Andreas A1 - Weise, Matthias A1 - Sahre, Mario A1 - Männ, Marion A1 - Beck, Uwe A1 - Bell, J. M. T1 - Near infrared optical materials from polymeric amorphous carbon synthesized by collisional plasma process N2 - The synthesis of polymerlike amorphous carbon (a-C:H) thin-films by microwave excited collisional hydrocarbon plasma process is reported. Stable and highly aromatic a-C:H were obtained containing significant inclusions of poly(p-phenylene vinylene) (PPV). PPV confers universal optoelectronic properties to the synthesized material. That is a-C:H with tailor-made refractive index are capable of becoming absorption-free in visible (red)-near infrared wavelength range. Production of large aromatic hydrocarbon including phenyl clusters and/or particles is attributed to enhanced coagulation of elemental plasma species under collisional plasma conditions. Detailed structural and morphological changes that occur in a-C:H during the plasma synthesis are also described. KW - Kohlenstoffschichten KW - Plasmachemie KW - PA-CVD KW - Amorphous state KW - Carbon KW - Coagulation KW - Hydrogen KW - Optical materials KW - Plasma collision processes KW - Plasma deposition KW - Refractive index KW - Thin films PY - 2010 DO - https://doi.org/10.1063/1.3431292 SN - 0003-6951 SN - 1077-3118 VL - 96 IS - 21 SP - 211909-1 - 211909-3 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-21365 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Beck, Uwe A1 - Reiners, Georg A1 - Sahre, Mario A1 - Weise, Matthias A1 - Gamer, Nadja A1 - Wegwerth, Tillmann T1 - Charakterisierung realer, modifizierter und beschichteter Oberflächen für den sterilen Behälter- und Anlagenbau KW - Steriltechnik KW - Oberflächentechnik KW - Oberflächenmesstechnik KW - Plasmabeschichtung KW - Partikel-Haftung PY - 2009 VL - 18 IS - 4 SP - 10 EP - 15 CY - Magdeburg AN - OPUS4-20307 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Baier, Jennifa A1 - Lange, Thorid A1 - Sahre, Mario A1 - Beck, Uwe T1 - Zerstörungsfreie Prüfung von Zinkschichten N2 - Zinkschichten wurden mit den zerstörungsfreien Methoden Röntgenfluoreszenz (XRF), mechanischer Tastschnitt (MS), Röntgenbeugung (XRD) und instrumentierter Eindringprüfung (IIT) hinsichtlich der makroskopischen und mikroskopischen Schichteigenschaften untersucht. Die Rauheit der Zinkschichten hängt im Wesentlichen von der Substratoberfläche ab. Inhomogenen Schichtdickenverteilung treten bekanntermaßen am Rand von Beschichtungsgestellen auf. Die plasto-elastische Eigenschaften Härte, E-Modul und Kriechen sind bei unterschiedlichen Abscheidungen vergleich- und reproduzierbar. Diese makroskopischen Schichteigenschaften sind geprägt von der Mikrostruktur der Schicht, die eine Vorzugsorientierung der Kristallite in der Netzebene (110), die senkrecht zur Substratoberfläche steht, zeigt. PY - 2009 SN - 0016-4232 VL - 100 IS - 5 SP - 1034 EP - 1040 PB - Leuze CY - Saulgau, Württ. AN - OPUS4-19457 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Binder, Christian A1 - Kasch, Thomas A1 - Brock, Thomas A1 - Beck, Uwe A1 - Weise, Matthias A1 - Sahre, Mario T1 - Promoted combustion testing of pure and ceramic-coated metals in high pressure oxygen by the federal institute of materials research and testing (BAM) N2 - The new promoted ignition combustion test apparatus at BAM matches the requirements of ASTM test method G 124 [ASTM G 124, Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres, 2003] and of EIGA publication, IGC Doc 13/02/E [EIGA Gas Association Document IGC Doc 13/02/E, Oxygen Pipeline Systems, 2003]. The test apparatus is most likely the only one in Europe. The test chamber allows investigations with pure oxygen or oxygen mixtures at pressures up to 500 bar and at temperatures up to 400°C at static or flowing gas conditions. The ignition device consists of an electrical ignition wire and a promoter. IR-sensors, distributed over the whole length of the rod, measure and record the burning temperature and allow measurement of the burn rate. A video system records the experiment for visual characterization of the burning behavior. BAM test results are compared with published data. Results on investigations with coated rods are presented. Ceramic coatings seem to be a solution for the use of certain less compatible metallic materials at higher oxygen pressures. KW - Promoted combustion KW - High pressure oxygen KW - Metallic materials KW - Flammability KW - Safety engineering KW - Coatings PY - 2006 DO - https://doi.org/10.1520/JAI13533 SN - 1546-962X VL - 3 IS - 4 SP - JAI13533, 1 EP - 6 PB - American Society for Testing and Materials CY - West Conshohocken, Pa. AN - OPUS4-12676 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Binder, Christian A1 - Kasch, Thomas A1 - Lehné, Siegfried A1 - Beck, Uwe A1 - Weise, Matthias A1 - Sahre, Mario T1 - Combustion tests under high pressure oxygen: Promoted ignition combustion test versus metallic disk ignition test N2 - Two different test apparatuses are used at BAM to evaluate the safety of oxygen components: First, the “promoted ignition combustion test” according to ASTM G 124 [1] and to EIGA IGC Doc 13/02/E [2], and second, the new “metallic disk ignition test” that has not been standardized yet. The standard test method ASTM G 124 allows a ranking of metallic materials for use at high pressure oxygen. However, the transfer of those test results to valves and fittings in real-life situations is rather complex. The “metallic disk ignition test,” developed at BAM, is more practice oriented and uses metallic disks of different thicknesses of the investigated material. A commonly used nonmetallic sealing ring is placed in front of this disk and serves as an igniter. This test array is then exposed to high pressure gaseous oxygen impacts in a standardized pneumatic impact tester according to DIN EN 1797 [3]. KW - Adiabatic compression KW - Pneumatic impact KW - Flammability KW - High pressure oxygen KW - Metallic materials KW - Promoted ignition KW - Coatings PY - 2006 DO - https://doi.org/10.1520/JAI13532 SN - 1546-962X VL - 3 IS - 5 SP - JAI13532, 1 EP - 5 PB - American Society for Testing and Materials CY - West Conshohocken, Pa. AN - OPUS4-12677 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Uwe A1 - Reiners, Georg A1 - Sahre, Mario A1 - Weise, Matthias A1 - Gamer, Nadja A1 - Wegwerth, Tillmann T1 - Charakterisierung idealer, realer und modifizierter Oberflächen der Steriltechnik T2 - 3-Länder-Korrosionstagung - Nichtrostender Stahl - Reinigen, beizen, passivieren, Korrosionsschutz optimieren CY - Basel, Schweiz DA - 2009-04-20 KW - Oberflächentopographie KW - Replikaverfahren KW - Oberflächenenergie KW - Modifizierung KW - Bearbeitung KW - Beschichtung und Strukturierung KW - Wechselwirkung mit Partikeln PY - 2009 SN - 978-3-935406-38-3 SP - 12 EP - 24 PB - DECHEMA CY - Frankfurt/M. AN - OPUS4-25599 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Beck, Uwe A1 - Hönig, D. A1 - Schneider, S. A1 - Domnick, R. A1 - Belzner, M. A1 - Hertwig, Andreas A1 - Stephanowitz, Ralph A1 - Sahre, Mario A1 - Weise, Matthias T1 - Fabry-Perot-based layer stacks for ellipsometric encoding - Embedded public, hidden, and forensic information for product authentication N2 - Public, hidden, and forensic features either encoded or directly legible are used for authentication. Fabry-Perot layer stacks as information carriers in combination with imaging ellipsometry as optical read-out system provide all-in-one anti-counterfeiting capability that may establish the new security level 'encoded forensic'. Different layer designs are described with regard to all three security levels: public features (e.g. color and tilt effect) perceptible by the human eye, hidden features (e.g. spectroscopic response in the UV or IR), and forensic features (ellipsometric quantities Ψ and Δ as a function of wavelength λ and angle of incidence AOI). Physically uncloneable functions (PUF) could be realized as a result of a multi-material and a multi-parameter deposition approach as well as by means of specific design features of the Fabry-Perot layer stack. Hence, they are not subject to any reverse engineering strategies. Examples of stratified, micro-structured, and laser-modified Fabry-Perot layer systems are considered that may be used at all perception levels (e.g. human eye, bar code reader, and imaging ellipsometry) for authentication against product counterfeiting and related areas. -------------------------------------------------------------------------------------------------------------------- Zur Authentifizierung werden offene, versteckte und forensische Merkmale entweder codiert oder direkt auslesbar verwendet. Mit Fabry-Perot Schichtsystemen als Informationsträger in Kombination mit der abbildenden Ellipsometrie als optischem Auslesesystem steht ein 'all-in-one' Fälschungsschutz-System zur Verfügung, das ein neues Sicherheitsniveau 'kodiert-forensisch' darstellt. Es werden unterschiedliche Schichtdesigns beschrieben, mit denen alle drei Sicherheitsniveaus realisiert werden können: offene Merkmale (z.B. Farbe und Kippeffekt), die mit dem menschlichen Auge wahrnehmbar sind, versteckte Merkmale (z.B. die spektrale Antwort im Sichtbaren oder im IR) sowie forensische Merkmale (ellipsometrische Größen Ψ und Δ als Funktion der Wellenlänge λ und des Einfallswinkels AOI). Physikalisch nicht klonbare Funktionen (PUF) können im Ergebnis einer Multi-Material- und Multi-Parameter Beschichtungsstrategie sowie durch spezifische Design-Merkmale des Fabry-Perot Schichtsystems realisiert werden. Folglich sind solche Schichtsysteme dem 'reverse engineering' nicht zugänglich. Es werden Beispiele für lateral ausgedehnte, mikrostrukturierte und Laser modifizierte Schichtsysteme auf verschiedenen Ausleseniveaus (menschliches Auge, Barcode-Lesegerät, abbildendes Ellipsometer) vorgestellt, die zur Authentifizierung von Produkten und verwandte Gebiete geeignet sind. KW - Fabry-Perot Schichten KW - Ellipsometrie KW - Produkt- und Markenschutz PY - 2012 DO - https://doi.org/10.1002/vipr.201200494 SN - 0947-076X SN - 1522-2454 VL - 24 IS - 4 SP - 6 EP - 11 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-26180 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Bobe, U. A1 - Beck, Uwe A1 - Wegwerth, Tillmann A1 - Sahre, Mario A1 - Weise, Matthias A1 - Strauß, Birgid A1 - Reetz, Susanne A1 - Schondelmaier, D. A1 - Kutz, O. A1 - Winzer, B. A1 - Schaule, G. T1 - Nanotechnologische Entwicklung von "easier-to-clean"- Oberflächenstrukturen für eine zukünftig gesteigerte Lebensmittel- und Produktsicherheit - Abschlussbericht AiF-Vorhaben Nr.: 210 ZN III N2 - Reinigung wird in der Lebensmittel- und Pharmaindustrie aufgrund des stetig steigenden Kosten- und Zeitdrucks sowie der hohen Verbrauchererwartungen hinsichtlich Produktsicherheit und -haltbarkeit ein immer zentraleres Thema. Eine verbesserte Reinigbarkeit bedeutet für die produzierende Industrie eine Steigerung der Effizienz der Produktionsanlage. Besonders in der heutigen medienintensiven Zeit kommt ein "Lebensmittelskandal" durch ein unsicheres Produkt einem finanziellen Desaster und immensem Imageverlust gleich. Aus diesem Grund ist die Reinigbarkeit der produktberührenden Oberflächen stets ein wichtiges Kriterium für die Werkstoffauswahl. Basierend auf den Theorien zu Schmutzhaftung und -entfernung wurde im Rahmen dieser Arbeit überprüft, ob und wie die theoretisch relevanten Parameter auch in den Experimenten den Reinigungserfolg beeinflussen. Der Schwerpunkt wurde auf die Einflussgrößen des Werkstoffes gelegt, um herauszufinden, wie stark eine Oberfläche selbst zu ihrer Reinigbarkeit beitragen kann (self-cleaning). In den durchgeführten Versuchen hat sich gezeigt, dass die Oberflächenrauheit lediglich bei der Reinigung von kohäsiven Schmutzfilmen eine entscheidende Rolle gespielt hat. Hingegen ist ihr Einfluss auf das Reinigungsergebnis von sich auflösenden Schmutzfilmen und Partikeln nur begrenzt bis gar nicht zur Geltung gekommen. Das Oberflächenmaterial hatte keinen starken, aber dennoch signifikanten Einfluss auf die Reinigbarkeit der untersuchten Oberflächen. Dass die Reinigbarkeit einer Oberfläche keine Materialkonstante sein kann, wurde unter Verwendung spezieller Oberflächen mit definiert geätzten Rauheitsstrukturen nachgewiesen. Der Reinigungserfolg hängt immer auch von der Verunreinigungsart ab, was sich auch in vergleichbaren Versuchen der Einzelpartikelablösung mittels AFM in dem Einfluss der Elastizität bzw. Plastizität der Partikeln geäußert hat. Praxistaugliche Empfehlungen gehören mit zu den wichtigsten Zielen dieser Arbeit gewesen. Mit Fokus auf die Oberflächenparameter und auf Basis der durchgeführten Untersuchungen wurde zur Optimierung der Reinigung produktberührender Oberflächen für bekannte Kontaminationen eine Checkliste als Orientierungshilfe erarbeitet. Ist die Verunreinigungsart dennoch unbekannt, so sollte der "Grenzwert" von Ra = 1 µm unterschritten werden, um bei Vorhandensein filmartiger Verschmutzungen keine negativen Auswirkungen auf die Reinigbarkeit zu haben. Die Notwendigkeit nach hochpolierten Oberflächen (Ra < 0,3 µm) aus Reinigbarkeitsgründen kann aufgrund der Untersuchungen nicht nachvollzogen werden. Das Ziel des Vorhabens wurde erreicht. PY - 2007 SP - I EP - 148 PB - TU München CY - Weihenstephan AN - OPUS4-25430 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Beck, Uwe A1 - Griepentrog, Michael A1 - Dück, Alexander A1 - Männ, Marion A1 - Sahre, Mario T1 - Certified reference material BAM-L100 Ti/Al multilayer on 100Cr6 steel PY - 2004 UR - http://www.rm-certificates.bam.de/de/rm-certificates_media/rm_cert_layer_and_surface/bam_l100repe.pdf SP - 1 EP - 23 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25406 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Beck, Uwe A1 - Griepentrog, Michael A1 - Dück, Alexander A1 - Männ, Marion A1 - Sahre, Mario T1 - Certified reference material BAM-L102 TiN single layer on 100Cr6 steel PY - 2004 UR - http://www.rm-certificates.bam.de/de/rm-certificates_media/rm_cert_layer_and_surface/bam_l102repe.pdf SP - 1 EP - 24 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25408 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Beck, Uwe A1 - Griepentrog, Michael A1 - Dück, Alexander A1 - Männ, Marion A1 - Sahre, Mario T1 - Certified reference material BAM-L103 VN single layer on 100Cr6 steel PY - 2004 UR - http://www.rm-certificates.bam.de/de/rm-certificates_media/rm_cert_layer_and_surface/bam_l103repe.pdf SP - 1 EP - 22 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25409 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Beck, Uwe A1 - Griepentrog, Michael A1 - Dück, Alexander A1 - Männ, Marion A1 - Sahre, Mario T1 - Certified reference material BAM-L104 TiC single layer on 100Cr6 steel PY - 2004 UR - http://www.rm-certificates.bam.de/de/rm-certificates_media/rm_cert_layer_and_surface/bam_l104repe.pdf SP - 1 EP - 22 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25410 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Beck, Uwe A1 - Griepentrog, Michael A1 - Dück, Alexander A1 - Männ, Marion A1 - Sahre, Mario T1 - Certified reference material BAM-L105 VC single layer on 100Cr6 steel PY - 2004 UR - http://www.rm-certificates.bam.de/de/rm-certificates_media/rm_cert_layer_and_surface/bam_l105repe.pdf SP - 1 EP - 22 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25411 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Baier, Jennifa A1 - Beck, Uwe A1 - Lange, Thorid A1 - Sahre, Mario T1 - Process-related interdependence of microstructure and mechanical properties of zinc coatings T1 - Einfluss der Prozessparameter auf Mikrostruktur und mechanische Eigenschaften von galvanischen Zinkschichten N2 - Electrochemical deposition (ECD) is of great importance in particular for highly durable long-term corrosion protection in various Areas such as automotive bodywork, construction industry and several outdoor and off-shore applications under harsh environments. In addition to corrosion protection, other functional properties such as decorative features (e. g. color and gloss) and mechanical properties (resistance to mechanical use) are of interest. The crystal structure of electrodeposited metals depends on several process-related parameters such as current density, electrolyte concentration, types of additives (inhibitors), pH-value, electrolyte temperature and hydrodynamics (flow characteristics). A distinct process parameter such as current density may affect both microstructure, i. e. the type of deposit structure and texture, and mechanical properties, e. g. indentation hardness and indentation modulus. Zinc was electrodeposited on steel sheets from a cyanide-free alkaline electrolyte by using different additives. The current efficiency and the deposition rate remarkably depend on the electrolyte conditions. Different crystal structures of zinc were observed in dependence on current density and electrolyte composition. As a result, mechanical properties and roughness of the coatings are affected by the crystal structure. The process-related interdependence of microscopic features and macroscopic properties of zinc deposits was studied by X-ray diffraction (XRD) regarding microstructure, by scanning electron microscopy (SEM) with respect to morphology and by instrumented indentation testing (IIT) for determination of indentation hardness, modulus and creep. It has been shown that the interdependence of process-related deposition parameters, deposit microstructure and macroscopic coating properties is a prerequisite of a model-based process simulation N2 - Die elektrochemische Abscheidung ist ein wichtiges Verfahren zur Herstellung von hochbeständigen Korrosionsschutzschichten für unterschiedliche Anwendungen, beispielsweise den Automobilbau, Maschinenbau oder verschiedene Außen- und Offshore-Anwendungen mit hohen Umweltbelastungen. Darüber hinaus müssen Korrosionsschutzschichten auch funktionelle oder dekorative Eigenschaften (z. B. Farbe oder Glanz) und mechanische Eigenschaften (Verschleißbeständigkeite) aufweisen. Die Kristallstruktur von abgeschiedenen Metallen hängt von unterschiedlichen Prozessparametern bei der Abscheidung ab, wie der Stromdichte, der Metallionenkonzentration, den Arten der Zusatzstoffe (Inhibitoren), dem pH-Wert, der Elektrolyttemperatur oder der Hydrodynamik (Strömungscharakteristik). Die Stromdichte beispielsweise beeinflusst sowohl die Mikrostruktur einer Schicht (Art der Kristalle und deren Textur) als auch deren mechanische Eigenschaften (Härte). Für die Untersuchung wurde Zink aus einem cyanidfreien Elektrolyten mit verschiedenen Zusätzen auf Stahlblech abgeschieden. Die Stromausbeute und damit auch die Abscheidegeschwindigkeit hängen von den Elektrolytparametern ab. Die Zinkschichten wiesen in Abhängigkeit von Stromdichte und Elektrolytzusammensetzung verschiedene Kristallstrukturen auf. Diese Unterschiede machten sich auch bei den mechanischen Eigenschaften und der Rauheit bemerkbar. Die prozessabhängige Struktur wurde mittels Röntgenbeugung (Mikrostruktur), REM (Morphologie) und instrumentierte Eindringprüfung (Härte, Eindringmodul, Kriechverhalten) untersucht. Die Kenntnis dieser Kennwerte ist für die Durchführung von Simulationen der galvanischen Abscheidung notwendig. KW - Zinc plating KW - Process parameters KW - Microstructure of zinc deposits KW - Mechanical properties PY - 2013 SN - 2195-5891 SN - 2195-5905 VL - 2 IS - 09 SP - 7 EP - 8 PB - WOTech CY - Waldshut-Tiengen AN - OPUS4-29095 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Uwe A1 - Wirth, Thomas A1 - Sahre, Mario A1 - Männ, Marion A1 - Gamer, Nadja A1 - Hoffmann, V. A1 - Hentschel, R. A1 - Brauneck, U. A1 - Mollenhauer, R. ED - Berg, S. T1 - Reference coatings for gdoes depth profiling - Preliminary results of a VAMAS project T2 - 7th International Conference on Plasma Surface Engineering (PSE 2000) CY - Garmisch-Partenkirchen, Germany DA - 2000-09-17 PY - 2000 SN - 0257-8972 IS - 142-144 PB - Elsevier CY - Amsterdam AN - OPUS4-970 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schukar, Vivien A1 - Köppe, Enrico A1 - Hofmann, Detlef A1 - Westphal, Anja A1 - Sahre, Mario A1 - Gong, Xin A1 - Bartholmai, Matthias A1 - Beck, Uwe T1 - Magnetic field detection with an advanced FBG-based sensor device N2 - A high-performance fiber Bragg grating-based (FBG) sensor device has been developed for the detection of small magnetic fields. Based on a smart multilayer jacket around the fibre over the physical length of the FBG, magnetic fields generated by rotating machine parts, power generators or power cable can be easily detected, analysed and evaluated. Consequently, this innovative, on-line and non-contact inspection method results in an increase in quality and reliability of high-performing machine parts, devices and cables. The basic physical principle is based on a magnetostrictive multilayer system that strains the high-resolution FBG element in presence of magnetic fields. Subsequently, a fixed relationship between induced magnetic field and wavelength change of the FBG element describes the characteristic sensitivity curve. Intensive tests regarding characterisation of this magnetic field FBG sensor have been carried out and its performance has been evaluated. T2 - 30th Eurosensors Conference, EUROSENSORS 2016 CY - Budapest, Hungary DA - 04.09.2016 KW - Fiber Bragg grating KW - Magnetostriction KW - Strain KW - Magnetic field PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-376703 DO - https://doi.org/10.1016/j.proeng.2016.11.445 SN - 1877-7058 VL - 168 SP - 1270 EP - 1274 PB - Elsevier Ltd. AN - OPUS4-37670 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Sarma, Dominik A1 - Mielke, Johannes A1 - Sahre, Mario A1 - Beck, Uwe A1 - Hodoroaba, Vasile-Dan A1 - Rurack, Knut T1 - TSEM-based contour analysis as a tool for the quantification of the profile roughness of silica shells on polystyrene core particles N2 - Core-shell (CS) particles with a polymeric core and a silica shell play an important role in the materials and (bio)analytical sciences. Besides the establishment of reliable synthesis procedures, comprehensive particle characterization is essential for batch-to-batch reproducibility and objective performance assessment across architectures, protocols, and laboratories. Particle characterization with respect to size, size distribution, shell thickness and texture, surface area and roughness or materials composition is commonly conducted with different analytical methods, often on different samples. Our approach uses a dual-mode TSEM/SEM set-up with an EDX detector to obtain a complementary data set with sufficient statistical confidence of one and the same sample on a single instrument. Our protocol reveals information about size, size distribution and shell thickness of the various particles employed from overview images, while an increased field of view (FOV) and high-resolution EDX analysis yields detailed information on shell texture and elemental composition. An image analysis tool was developed to derive and quantify the profile roughness of CS particles from individual beads. Comparison with surface roughness data from AFM showed a similar trend in roughness across the series of particles. Reliable classification into smooth and rough is proposed and roughness changes within different particle batches were tracked systematically. KW - Core-shell particles KW - Electron microscopy KW - Transmission mode KW - Roughness KW - Image analysis PY - 2017 DO - https://doi.org/10.1016/j.apsusc.2017.07.099 SN - 0169-4332 SN - 1873-5584 VL - 426 IS - 1 SP - 446 EP - 455 PB - Elsevier B.V. CY - Amsterdam AN - OPUS4-42256 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mitzkus, Anja A1 - Sahre, Mario A1 - Basedau, Frank A1 - Hofman, Detlef A1 - Beck, Uwe T1 - Fiber Bragg Gratings for In-Situ Stress Monitoring of Electrochemical Deposition N2 - The in-situ monitoring of electrochemical deposition (ECD) processes is still a challenge regarding the measurement of the effective temperature of the substrate and the formation of mechanical stress in the layer under given plating conditions. Monitoring problems can be solved by applying a pre-coated fiber Bragg grating (FBG) to the electrolytic process as the shift of the Bragg wavelength is affected by both the temperature of the electrolyte near the substrate and the stress formation in the growing layer. The experimental FBG set-up and the quantitative determination of temperature- and stress-related strain is described for a nickel-iron electrolyte. KW - Fiber Bragg grating (FBG) KW - Electrochemical deposition (ECD) KW - Optical fibers PY - 2019 DO - https://doi.org/10.1149/2.0111906jes SN - 0013-4651 VL - 166 IS - 6 SP - B312 EP - B315 PB - Electrochemical Society CY - Pennington, NJ AN - OPUS4-47738 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -