TY - CONF A1 - Rietz, U. A1 - Lerche, D. A1 - Beck, Uwe A1 - Hielscher, Stefan A1 - Kern, Janine T1 - Determination of bonding, adhesive and composite strength by means of centrifuge technology T2 - EURADH 2014 - 10th European Adhesion Conference (Proceedings) N2 - The quality and durability of bonded joints, coated systems and composites depend on various factors. Therefore effective quantitative tests to determine adhesive, bonding or composite strength are of great need for R&D and QC. In this paper a new measuring principle is described which uses the centrifugal force to generate the test load. By the geometry of the whole measurement set-up, the test specimen are supported from only one side, the influence of shear forces is avoided. The possibility to test up to eight samples in one measurement under identical testing conditions allows a high sample throughput. A detailed description of the whole sample preparation procedure including pre-treatment is followed by the specification of the measuring protocol as well as result analysis. For each application area bonding strength of joints, adhesive strength of coated systems and internal strength of composite materials examples are presented. T2 - EURADH 2014 - 10th European Adhesion Conference CY - Alicante, Spain DA - 22.04.2014 KW - Adhesive strength KW - Bonding strength KW - Composites KW - Centrifuge technology KW - Zentrifugentechnologie KW - Klebfestigkeit KW - Haftfestigkeit KW - Mehr-Proben-Prüfen/Kleben PY - 2014 SN - 978-84-616-9067-1 SN - 84-616-9067-2 SP - Paper 47, 203 EP - 206 AN - OPUS4-31311 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rietz, U. A1 - Hielscher, Stefan A1 - Kern, Janine A1 - Beck, Uwe A1 - Lerche, D. T1 - Centrifuge technology revolutionises adhesion testing T2 - Dispersion Letters N2 - Composite materials fulfil a great variety of functions in a wide field of applications. Testing the composite properties under environmental conditions is a must for development and quality control. Common tensile strength test instruments have limitations, like single sample handling only. Present test methods for multi-layers, e.g. peel test, permit semi-quantitative ,or qualitative evaluation only. A new instrument based on analytical centrifugation is introduced, using centrifugal force as test load, permitting to determine bonding and adhesive strength of up to 8 samples simultaneously. KW - Adhesion KW - Testing KW - Composites KW - Coatings KW - Tensile strength KW - Analytical centrifugation KW - Zentrifugentechnologie KW - Klebfestigkeit KW - Haftfestigkeit KW - Verbundfestigkeit PY - 2013 SN - 978-3-944261-28-7 VL - 4 SP - 1 EP - 4 PB - LUM GmbH CY - Berlin AN - OPUS4-30047 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pfuch, A. A1 - Beck, Uwe A1 - Lange, Thorid A1 - Rietz, U. A1 - Küzün, B. A1 - Twardygrosz, R. T1 - Wie Klebungen einfacher validiert werden können JF - Adhäsion N2 - Die Bestimmung der Haftfestigkeit von Lackierungen, Beschichtungen oder Klebungen ist wichtig für die Beurteilung von entsprechenden Fertigungsabläufen. Unter Verwendung einer neuen Zentrifugentechnik wurde jetzt ein neues Mehr-Proben-Konzept zur schnellen Validierung von Klebverbindungen entwickelt. KW - Klebfestigkeit KW - Haftfestigkeit KW - Mehr-Proben-Vorbehandeln/Kleben/Prüfen PY - 2015 SN - 0001-8198 VL - 9 SP - 44 EP - 52 PB - Vieweg CY - Wiesbaden AN - OPUS4-34282 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Beck, Uwe A1 - Pfuch, A. A1 - Rietz, U. T1 - Zentrifugentechnologie erleichtert Prüfverfahren JF - WOMag : Kompetenz in Werkstoff und funktioneller Oberfläche N2 - Die Bestimmung der Haftfestigkeit von Lackierungen, Beschichtungen oder Klebeverbunden ist ein wichtiges Analyseinstrument bei der Beurteilung von entsprechenden Fertigungsabläufen. Unter Verwendung einer neuen Zentrifugentechnologie wurde in einem AiF Forschungsprojekt OKTETT die gesamte Prozesskette Vorbehandlung - Verklebung - Prüfung validiert. KW - Klebfestigkeit KW - Haftfestigkeit KW - Mehr-Proben-Vorbehandeln/Kleben/Prüfen PY - 2015 SN - 2195-5891 SN - 2195-5905 IS - 3 SP - 1 PB - WOTech CY - Waldshut-Tiengen AN - OPUS4-32834 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Uwe A1 - Hielscher, Stefan A1 - Lange, Thorid A1 - Weise, Matthias A1 - Kittler-Packmor, Kai A1 - Rietz, U. A1 - Lerche, D. A1 - Pfuch, A. T1 - Mehr-Proben-Konzept zum Kleben und Prüfen: Validierung von Klebverbunden im OKTETT T2 - 10. ThGOT Thementage Grenz- und Oberflächentechnik mit 4. Optik-Kolloquium (Proceedings) T2 - 10. ThGOT Thementage Grenz- und Oberflächentechnik mit 4. Optik-Kolloquium CY - Leipzig, Germany DA - 2014-09-02 KW - Zentrifugentechnologie KW - Klebfestigkeit KW - Haftfestigkeit KW - Mehr-Proben-Prüfen/Kleben PY - 2014 SP - BA04, 1 EP - 2 AN - OPUS4-31313 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beck, Uwe A1 - Hielscher, Stefan A1 - Kittler-Packmor, Kai A1 - Stockmann, Jörg M. A1 - Lerche, D. A1 - Rietz, U. ED - Petzow, G. T1 - Zentrifugentechnologie in der Beanspruchung auf Zug bzw. Druck: Klebfestigkeit, Schichthaftung, Materialhärte T2 - Fortschritte in der Metallographie - Vortragstexte der 47. Metallographie-Tagung T2 - 47. Metallographie-Tagung CY - Friedrichshafen, Germany DA - 2013-09-18 KW - Klebfestigkeit KW - Haftfestigkeit KW - Verbundfestigkeit KW - Brinell- und Vickers Härte KW - Zentrifugentechnologie PY - 2013 SN - 978-3-88355-398-6 N1 - Geburtsname von Kittler-Packmor, Kai: Kittler, K. - Birth name of Kittler-Packmor, Kai: Kittler, K. VL - 45 SP - 157 EP - 162 AN - OPUS4-29276 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -