TY - CONF A1 - Rietz, U. A1 - Lerche, D. A1 - Beck, Uwe A1 - Hielscher, Stefan A1 - Kern, Janine T1 - Determination of bonding, adhesive and composite strength by means of centrifuge technology T2 - EURADH 2014 - 10th European Adhesion Conference (Proceedings) N2 - The quality and durability of bonded joints, coated systems and composites depend on various factors. Therefore effective quantitative tests to determine adhesive, bonding or composite strength are of great need for R&D and QC. In this paper a new measuring principle is described which uses the centrifugal force to generate the test load. By the geometry of the whole measurement set-up, the test specimen are supported from only one side, the influence of shear forces is avoided. The possibility to test up to eight samples in one measurement under identical testing conditions allows a high sample throughput. A detailed description of the whole sample preparation procedure including pre-treatment is followed by the specification of the measuring protocol as well as result analysis. For each application area bonding strength of joints, adhesive strength of coated systems and internal strength of composite materials examples are presented. T2 - EURADH 2014 - 10th European Adhesion Conference CY - Alicante, Spain DA - 22.04.2014 KW - Adhesive strength KW - Bonding strength KW - Composites KW - Centrifuge technology KW - Zentrifugentechnologie KW - Klebfestigkeit KW - Haftfestigkeit KW - Mehr-Proben-Prüfen/Kleben PY - 2014 SN - 978-84-616-9067-1 SN - 84-616-9067-2 SP - Paper 47, 203 EP - 206 AN - OPUS4-31311 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -