TY - JOUR A1 - Weise, Frank A1 - Stelzner, Ludwig A1 - Recknagel, Christoph A1 - Pittrich, Tim A1 - Neugum, Tim A1 - Hering, Marcus A1 - Fiedler, Georg A1 - Thiele, Marc A1 - Simon, Patrick A1 - Maack, Stefan T1 - 63. DAfStb-Forschungskolloquium in der BAM - Themenblock 5: Bauteile und Bauwerke N2 - Ein weiterer Fokus des 63. DAfStb-Forschungskolloquiums (Tagungsband: DOI 10.26272/opus4-61338) lag auf den Bauteil- und Bauwerksuntersuchungen. Insbesondere wurde hier ein Einblick in die Forschungsaktivitäten in den BAM-Themenfeldern „Infrastruktur“ und „Energie“ gegeben. Thematisch wird dabei der Bogen von der Dauerhaftigkeit von Betonfahrbahndecken über die Extrembeanspruchung von Bauteilen und Bauwerken mittels Brand und Impact bis zum Bauwerksmonitoring und der Zustandsanalyse von Bestandsbauwerken gespannt. T2 - 11. Jahrestagung des DAfStb mit 63. Forschungskolloquium der BAM Green Intelligent Building CY - Berlin, Germany DA - 16.10.2024 KW - Dauerhaftigkeit von Betonfahrbahndecken KW - Alkali-Kieselsäurereaktion KW - Brand Impact KW - Bauwerksmonitoring PY - 2025 SN - 0005-9846 VL - 75 IS - 4 SP - 138 EP - 140 PB - concrete content UG CY - Schermbeck AN - OPUS4-63071 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Recknagel, Christoph A1 - Engel, Philipp T1 - SensoJointField - Konzeption einer Online-Messstation zur Deformationserfassung im Fugenbereich hochbeanspruchter Betonverkehrsflächen N2 - Im Rahme eines Forschungsauftrages des Bundeministeriums für Verkehr wurde ein autonomes Sensornetzwerk "SensoJoint" für den Feldeinsatz im hochbeanspruchten Bundesfernstraßenbereich entwickelt. Grundlage ist der 3-axiale Deformationssensor "SensoJoint" der BAM, der im Verbund mit weiteren Sensoren (z.B. WIM-Sensorik) ein intelligentes und - im Zusammenhang mit einem modernen Energiemanagement - autarkes Monitoring-System bildet. Der Beitrag gibt einen Überblick zum Stand des F&E-Projektes. KW - Performance Konzept KW - Infrastruktur KW - Hochbeanspruchte Betonfahrbahndecken KW - Fugenproblematik PY - 2025 DO - https://doi.org/10.53184/STA12-2025-1 SN - 0039-2162 VL - 76 IS - 12 SP - 895 EP - 899 PB - Kirschbaum-Verlag CY - Bonn AN - OPUS4-65301 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Recknagel, Christoph A1 - Spilker, Alexandra A1 - Buchheim, Janine T1 - INFUKON - Ein neuer Ansatz zur ganzheitlichen Analyse des Gebrauchsverhaltens hochbeanspruchter Betonfahrbahndecken im Fugenbereich N2 - Betonfahrbahndecken zeichnen sich insbesondere durch eine hohe Dauerhaftigkeit und Wartungsarmut aus, welche im Ergebnis zu einer sehr guten Kosteneffizienz und Nachhaltigkeit führen. In den vergangenen Jahren wurden große Fortschritte hinsichtlich der Weiterentwicklung von Konstruktion, Baustoff und Fahrbahnoberfläche erzielt. Forschung und Entwicklung befassen sich seit einigen Jahren systematisch auch mit der Optimierung von Fugensystemen für hochbeanspruchte Bundesfernstraßen. Das Forschungsprojekt INFUKON liefert einen generalisierbaren methodischen Ansatz zur ganzheitlichen Analyse des Gebrauchsverhaltens hochbeanspruchter Fugensysteme in Betonfahrbahndecken und eine innovative Versuchseinrichtung die als technische Grundlage zur Verfügung stehen. In diesem Beitrag werden wesentliche Projektergebnisse vorgestellt. KW - Betonfahrbahndecken KW - Fuge KW - Fugenfüllsysteme KW - Untersuchungsmethodik KW - Leistungsermittlung KW - Dauerhaftigkeit KW - Funktionsfähigkeit PY - 2023 DO - https://doi.org/10.53184/STA11-2023-4 VL - 74 IS - 11 SP - 916 EP - 926 PB - Kirschbaumverlag GmbH CY - Bonn AN - OPUS4-59141 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weigel, Sandra A1 - Gehrke, M. A1 - Recknagel, Christoph A1 - Stephan, D. T1 - Identification and quantification of additives in bituminous binders based on FTIR spectroscopy and multivariate analysis methods N2 - Bitumen is a crucial building material in road construction, which is exposed to continuously higher stresses due to higher traffic loads and changing climatic conditions. Therefore, various additives are increasingly being added to the bitumen complicating the characterisation of the bituminous binder, especially concerning the reuse of reclaimed asphalt. Therefore, this work aimed to demonstrate that the combination of Fourier transform infrared (FTIR) spectroscopy with attenuated total reflexion (ATR) technique and multivariate evaluation is a very wellsuited method to reliable identify and quantify additives in bituminous binders. For this purpose, various unmodified and modified binders, directly and extracted from laboratory and reclaimed asphalts, were investigated with FTIR-ATR spectroscopy. The determined spectra, pre-processed by standard normal variate (SNV) transformation and the determination of the 1st derivation, were evaluated using factor Analysis (FA), linear discriminant analysis (LDA) and partial least square regression (PLSR). With this multivariate evaluation, first, a significant model with a very high hit rate of over 90% was developed allowing for the identification of styrene-butadiene copolymers (SBC), ethylene-copolymer bitumen (ECB) and different waxes (e.g. amide and Fischer-Tropsch wax) even if the additives do not show any additional peaks or the samples are multi-modified. Second, a quantification of the content is possible for SBC, ECB, and Amide wax with a mean error of RMSE B 0.4 wt% and a coefficient of determination of R2[90%. Based on these results, FTIR identification and quantification of additives in bituminous binders is a very promising method with a great potential. KW - Bituminous binders KW - FTIR-ATR KW - Multivariate evaluation KW - Identification and quantification of additives KW - Polymers KW - Waxes PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-534877 DO - https://doi.org/10.1617/s11527-021-01763-1 VL - 54 IS - 4 SP - 1 EP - 9 PB - Springer AN - OPUS4-53487 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weigel, Sandra A1 - Recknagel, Christoph T1 - FTIR-Charakterisierung von Bitumen - Möglichkeiten und Chancen N2 - Das erdölstammige Bindemittel Bitumen weist eine so komplexe Struktur auf, dass diese mit den derzeit eingesetzten Verfahren nur eingeschränkt erfasst werden kann. Eine innovative und vielversprechende Möglichkeit bietet in diesem Zusammenhang die FTIR-Spektroskopie in Kombination mit einer chemometrischen Auswertung, mit der schnell und einfach Aussagen über die Zusammensetzung sowie verschiedenste physikalische und chemische Eigenschaften von bitumenhaltigen Materialien möglich werden. KW - Bitumen KW - FTIR KW - Chemometrie KW - Multivariate Analysemethoden KW - Charakterisierung KW - Identifizierung von Additiven PY - 2021 SN - 1618-8357 SP - 42 EP - 49 PB - ALPHA Informationsgesellschaft mbH CY - Lampertheim AN - OPUS4-53486 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wallau, Wilma A1 - Recknagel, Christoph A1 - Smales, Glen Jacob T1 - Structural silicone sealants after exposure to laboratory test for durability assessment N2 - During the service life of structural sealant glazing (SSG) facades, the loadbearing capacity of the silicone bonds needs to be guaranteed. Laboratory Tests can assess the durability of SSG-systems based on mechanical characteristics of the bond after simultaneous exposure to both climatic and mechanical loads. This article studies how the material characteristics of two common structural sealants are affected by laboratory and field exposure. Dynamic mechanical Analysis (DMA) confirms a reduction in the dynamic modulus of exposed Silicone samples. Results from thermogravimetric analysis, Fourier-transform infrared spectroscopy, differential scanning calorimetry, and small-angle X-ray scattering/wide-angle X-ray scattering show differences between the two sealants and indicate no/minor changes in the composition and morphology of the laboratory and field exposed sealants. Mechanical characterization methods, such as DMA, and tensile and shear testing of the structural bond, are shown to be sensitive toward the combined climatic and mechanical loadings, and are hence suitable for studying degradation mechanisms of structural sealants. KW - Aging KW - Analytical methods KW - Fatigue KW - Silicone elastomer KW - Structural sealant glazing PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-527217 DO - https://doi.org/10.1002/app.50881 VL - 138 IS - 35 SP - 50881 PB - Wiley AN - OPUS4-52721 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wallau, Wilma A1 - Recknagel, Christoph T1 - Durability Assessment of Structural Sealant Glazing Systems applying a Performance Test Method N2 - During the service life of a Structural Sealant Glazing (SSG) facade, its silicone bond is exposed to climatic, chemical, and mechanical loads. While current durability assessment methods schedule separate test programmes for accelerated weathering and fatigue, the presented test applies mechanical loading and weather cycling simultaneously to simulate 50 years of use. Specifically designed medium-scale system specimens resemble a common SSG-bond. Displacement-controlled sinusoidal load cycles in two load directions subject these specimens to tensile, compression and shear loads. Weathering comprises temperature and humidity cycles, UV-radiation, and application of water and detergent. During testing, the forces transmitted by the system specimens are continuously measured for performance assessment. The resulting system response reveals mechanical performance characteristics like elastic moduli and dissipated energies which decrease during exposure, indicating stress relaxation and degradation. Two common structural sealants were tested. After testing, sections of the system specimens were subjected to tensile and shear tests for mechanical characterisation. Strengths and moduli are notably reduced by combined loading compared to those of reference and weathered specimens. Hardness and visual inspections of the bond correlate with the performance and bond characteristics. The approach introduced in this article provides a basis for life cycle assessment of SSG-systems. KW - Structural sealant glazing KW - Cyclic weathering KW - Mechanical loading KW - Artificial ageing KW - Durability assessment PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-519172 DO - https://doi.org/10.1080/00218464.2020.1840985 VL - 98 IS - 5 SP - 464 EP - 487 PB - Taylor & Francis Group AN - OPUS4-51917 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wallau, Wilma A1 - Recknagel, Christoph T1 - Test methodology for performance assessment of structural sealant glazing systems at superimposed mechanical and climatic loading N2 - Reliable performance of structural sealant glazing (SSG) systems is necessary to utilise advantages of SSG in glass facades. Conventional durability assessment of structural sealant joints is based on separated weathering tests and empirical fatigue testing. This work presents a new test methodology for performance assessment of SSGjoints at simultaneous weathering and two-dimensional mechanical loading. The climatic and mechanical load function were derived from common loading scenarios according to a worst case approach. A System test specimen, resembling a common SSG-joint, was exposed to 24 h of combined loading in a custom-designed test facility. From the recorded mechanical system response, characteristic parameters were evaluated to assess the performance of the system at varying climatic and mechanical conditions. These experimental results reveal effects of ambient conditions, previous loading and deformation Amplitude peaks on the system response. The proposed test methodology opens up for new performance-related approaches in durability testing. KW - Structural sealant glazing KW - Performance assessment KW - Durability testing KW - Hysteresis measurement KW - Superimposed loading PY - 2019 DO - https://doi.org/10.1016/j.polymertesting.2019.106030 SN - 0142-9418 VL - 79 SP - 106030, 1 EP - 15 PB - Elsevier AN - OPUS4-48871 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Recknagel, Christoph A1 - Eilers, M. T1 - Flexible Konstruktionen für Fahrbahnübergänge N2 - Die Bezeichnung hat sich im deutschen Sprachgebrauch bei derartiger Nutzung eingebürgert; sie geht von der Vorstellung aus, dass die Fahrbahn - und damit der Verkehrsfluss - über den Fugenspalt hinweg geführt wird und verwendet diese Funktionalität begriffsbestimmend. KW - Fahrbahnübergänge KW - Straßen- und Tiefbau KW - BASt PY - 2014 SN - 0039-2197 VL - 68 IS - 8 SP - 24 EP - 31 PB - Giesel CY - Hannover AN - OPUS4-32413 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Recknagel, Christoph T1 - Potential of dynamic-mechanical analysis toward a complementary material and system testing approach for structural glazing N2 - Dynamic-mechanical material analysis as a basis for a general performance exploration complemented by system testing under superimposed climatic and mechanical loading seems to be a promising interdependent test approach addressing the performance behavior of construction sealants under more realistic conditions. With this contribution an attempt is made to adapt dynamic-mechanical material analysis, which has been already successfully validated for different construction types of expansion joint systems in road and bridge engineering, to the field of construction sealants for building façades. Test results from dynamic-mechanical material analysis characterizing the temperature-dependent, deformation-dependent, and frequency-dependent behavior of structural sealant materials are presented and exemplarily discussed for three different sealant products. An attempt is made to address unknown material characteristics in the multi-dimensional loading matrix representing practical use conditions. Furthermore, the applicability of this test approach and its various complex test modes for the exploration of technological performance and especially estimation of fatigue behavior is verified in several examples. Based on this fundamental material exploration, it is planned to complement the dynamic-mechanical assessment methodology by means of system tests on a section of a structural glazing system subjected to a simplified but superimposed loading function. The technical fundamentals and the procedure proposed to develop an adequate system test mode are introduced. The motivation for these investigations is to identify the actual mechanical system behavior under load combinations and for specimens that both closer resemble reality. The objective is to achieve a consistent and interdependent test program complementary to the existing methodology. Finally, the study is meant to initiate further progress toward a performance-related methodology which considers the design, specification, material, and system selection. KW - Civil engineering and buidling materials PY - 2012 UR - http://www.astm.org/DIGITAL_LIBRARY/JOURNALS/JAI/PAGES/JAI104124.htm DO - https://doi.org/10.1520/JAI104124 SN - 1546-962X VL - 9 IS - 4 SP - 1 EP - 17(?) PB - American Society for Testing and Materials CY - West Conshohocken, Pa. AN - OPUS4-25887 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -