TY - JOUR A1 - Maierhofer, Christiane A1 - Brink, Arne A1 - Röllig, Mathias A1 - Wiggenhauser, Herbert T1 - Transient thermography for structural investigation of concrete and composites in the near surface region KW - Impulse thermography KW - Non-destructive testing KW - Quantitative analysis KW - Concrete KW - Composites KW - Civil engineering KW - Simulation KW - Finite differences PY - 2002 SN - 1350-4495 VL - 43 SP - 271 EP - 278 PB - Pergamon Press CY - Oxford AN - OPUS4-1759 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brink, Arne A1 - Wedler, Gerd A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Weritz, Friederike A1 - Wiggenhauser, Herbert T1 - Active infrared thermography in civil engineering - quantitative analysis by numerical simulation N2 - The cooling-down process of building structures after heating-up with an external radiation source was analysed to detect voids inside and below the surface. Quantitative results of concrete test specimen containing voids with different sizes at various depths will be presented here. The experimental results were compared to numerical simulations performed with a Finite Difference program developed at BAM. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 KW - Non-destructive testing in civil engineering KW - Acitve thermography KW - Concrete KW - Voids KW - Numerical SImulation KW - Finite differences PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/p024/p024.htm SN - 3-931381-49-8 SP - 1 EP - 8(?) PB - DGZfP CY - Berlin AN - OPUS4-3403 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühnemund, Lutz A1 - Kautek, Wolfgang A1 - Röllig, Mathias ED - Plieth, W. T1 - Pulse Laser Depassivation at 532 nm of Titanium in NaCl Electrolytes T2 - Jahrestagung. Gesellschaft Deutscher Chemiker, Fachgruppe Angewandte Elektrochemie CY - Freiberg, Germany DA - 1999-09-29 KW - Pulsed-Laser-Depassivated Titanium PY - 2000 SN - 3-924763-85-2 N1 - Serientitel: GDCh-Monographien – Series title: GDCh-Monographien IS - 18 SP - 117 EP - 124 PB - Ges. Deutscher Chemiker CY - Frankfurt am Main AN - OPUS4-842 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brink, Arne A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Wiggenhauser, Herbert ED - Balageas, D. T1 - Application of quantitative impulse thermography for structural evaluation in civil engineering - comparison of experimental results and numerical simulations T2 - 6th International Conference on Quantitative InfraRed Thermography ; 6th QIRT '02 CY - Dubrovnik, Croatia DA - 2002-09-24 PY - 2002 SN - 953-631350-2 SP - 35 EP - 40 PB - FSB CY - Zagreb AN - OPUS4-1822 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Brink, Arne A1 - Röllig, Mathias A1 - Wiggenhauser, Herbert T1 - Anwendung der Impuls-Thermografie als quantitatives zerstörungsfreies Prüfverfahren im Bauwesen N2 - Zusammenfassung Die Impuls-Thermografie ist eine aktive Methode zur Strukturuntersuchung von Bauteilen. Im Rahmen eines von der DFG geförderten Projektes wird in Kooperation mit der TU Berlin an der Bundesanstalt für Materialforschung und -prüfung zur Zeit die mögliche Anwendung der Impuls-Thermografie als zerstörungsfreies Prüfverfahren im Bauwesen untersucht. Die Impuls-Thermografie soll zur Ortung von oberflächennahen Inhomogenitäten, bei denen es sich im Normalfall um Fehlstellen handelt, in typischen Bauteilen verwendet werden und nach Möglichkeit die Geometrie- sowie die Materialparameter der Inhomogenitäten quantitativ bestimmt werden. Messungen werden derart durchgeführt, dass Oberflächen mit einem geeigneten Heizstrahler erwärmt, die anschließenden Abkühlungsprozesse mit einer Infrarot-Kamera betrachtet und thermische Bilddaten (Thermogramme) aufgezeichnet werden. Der Hauptansatzpunkt für die quantitative Auswertung der Messdaten ist die Betrachtung von Temperatur-Zeit-Kurven (Transienten) des Abkühlungsprozesses über fehlerfreien und fehlerhaften Bereichen des Probekörpers. Zusätzlich werden auf Basis der Finiten-Differenzen-Methode numerische Simulationen durchgeführt. Quantitative Ergebnisse werden sowohl durch den Vergleich der experimentellen Daten mit den Simulationsrechnungen als auch durch eine Anpassung analytischer Funktionen an die Transienten erzielt. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Zerstörungsfreie Prüfung im Bauwesen (ZfPBau) KW - Impuls-Thermografie KW - Hohlstellen KW - Schichtablösungen KW - Beton PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/v45/v45.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1824 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Brink, Arne A1 - Röllig, Mathias A1 - Wiggenhauser, Herbert A1 - Hillemeier, B. A1 - Rieck, C. ED - Kupfer, K. ED - Trinks, E. T1 - Untersuchung des Einflusses von Feuchtigkeit auf die Ortung von Hohlstellen in Betonstrukturen mit der Impuls-Thermografie T2 - 11. Feuchtetag CY - Weimar, Deutschland DA - 2002-09-18 KW - Impuls-Thermografie KW - Thermografie KW - Zerstörungsfreie Prüfung im Bauwesen KW - Simulation KW - Hohlstellen KW - Kiesnester KW - Feuchtigkeit KW - Beton PY - 2002 SP - 47 EP - 58 PB - MFPA an der Bauhaus-Univ. CY - Weimar AN - OPUS4-1827 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Brink, Arne A1 - Röllig, Mathias A1 - Wiggenhauser, Herbert T1 - Impulse Thermography for locating voids and honeycombing in concrete structures supported by numerical simulations T2 - 11. Bauklimatisches Symposium ; 11th Symposium of Building Physics CY - Dresden, Germany DA - 2002-09-26 PY - 2002 SP - 242 EP - 252 PB - TU CY - Dresden AN - OPUS4-1828 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Brink, Arne A1 - Röllig, Mathias A1 - Wiggenhauser, Herbert ED - Binda, L. T1 - Transient thermography for non-destructive investigation of building structures in the near surface region T2 - RILEM TC 177-MDT Workshop on On-Site Control and Non-Destructive Evaluation of Masonry Structures CY - Mantova, Italy DA - 2001-11-12 KW - Non-destructive testing KW - Masonry KW - Concrete KW - Impulse thermography KW - Plaster KW - Laminates PY - 2003 SN - 2-912143-34-9 N1 - Serientitel: RILEM proceedings – Series title: RILEM proceedings IS - 26 SP - 251 EP - 261 PB - RILEM Publications CY - Bagneux, France AN - OPUS4-1829 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Wöstmann, Jens A1 - Brink, Arne A1 - Röllig, Mathias T1 - Ortung von Hohlstellen und Ablösungen in Betonkonstruktionen mit Radar und Impuls-Thermografie T2 - 21. GESA-Symposium 2003 CY - Braunschweig, Deutschland DA - 2003-06-12 KW - Zerstörungsfreie Prüfung im Bauwesen KW - Radar KW - Impuls-Thermografie KW - Beton KW - Hohlstellen KW - Ablösungen PY - 2003 SN - 3-18-091757-1 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1757 SP - 281 EP - 292 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-3157 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Arndt, Ralf A1 - Röllig, Mathias A1 - Weritz, Friederike A1 - Wiggenhauser, Herbert T1 - Untersuchung von Betonstrukturen mit der Puls-Phasen-Thermografie T2 - Thermografie-Kolloquium 2003 CY - Stuttgart, Deutschland DA - 2003-09-25 KW - Zerstörungsfreie Prüfung im Bauwesen KW - Impuls-Thermografie KW - Puls-Phasen Thermografie KW - Beton KW - Spaltklinker KW - Hohlstellen KW - Ablösungen PY - 2003 UR - http://www.ndt.net/search/docs.php3?date=2006-01&issue=1 SN - 3-931381-51-X N1 - Serientitel: DGZfP-Berichtsband – Series title: DGZfP-Berichtsband IS - 86-CD SP - 53 EP - 62 PB - DGZfP CY - Berlin AN - OPUS4-3158 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Brink, Arne A1 - Röllig, Mathias A1 - Wiggenhauser, Herbert T1 - Quantitative Impulse-Thermography as Non-Destructive Testing Method in Civil Engineering - Experimental Results and Numerical Simulations N2 - Impulse-thermography is an active method for quantitative investigation of the near surface region of various structures which has recently been applied to civil engineering. It is well suited for the detection of voids and honeycombing in concrete up to concrete covers of 10 cm and more. For quantitative analysis, a computer program for numerical simulation of the heating up and cooling down processes was developed based on Finite Differences. With this program parameter studies have been performed for investigating the influence of environmental conditions, material parameters and geometry on the thermal behaviour. The comparison between experimental and simulated results enables the Inverse Solution. KW - Impulse-thermography KW - Numerical simulation KW - Non-destructive testing KW - Concrete KW - Civil engineering PY - 2005 SN - 0950-0618 VL - 19 IS - 10 SP - 731 EP - 737 PB - Elsevier CY - Oxford AN - OPUS4-3162 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Brink, Arne A1 - Röllig, Mathias A1 - Wiggenhauser, Herbert A1 - Hillemeier, B. A1 - Rieck, C. T1 - Struktur- und Feuchteuntersuchung in Betonstrukturen mit der Impuls-Thermografie KW - Zerstörungsfreie Prüfung im Bauwesen KW - Impuls-Thermografie KW - Beton KW - Hohlstellen KW - Kiesnester KW - Simulation PY - 2003 UR - http://www3.interscience.wiley.com/cgi-bin/jtoc/60500216/2005 SN - 0171-5445 SN - 1437-0980 VL - 25 IS - 1 SP - 22 EP - 26 PB - Ernst CY - Berlin AN - OPUS4-3164 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Brink, Arne A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Wiggenhauser, Herbert T1 - Anwendung der Impuls-Thermografie als zerstörungsfreies Prüfverfahren im Bauwesen T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen Zerstörungsfreier Prüfungen CY - Leipzig, Deutschland DA - 2001-10-25 KW - Impuls-Thermografie KW - Thermografie KW - Zerstörungsfreie Prüfung KW - Abkühlungsprozess KW - Bauingenieurwesen KW - Beton KW - Spaltklinker KW - Simulation PY - 2001 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 76-CD PB - DGZfP CY - Berlin AN - OPUS4-1187 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Brink, Arne A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Wiggenhauser, Herbert T1 - Auswertungsmethoden der Impuls-Thermografie zur Ortung von Fehlstellen in Betonstrukturen T2 - Thermografie-Kolloquium 2001 CY - Stuttgart, Deutschland DA - 2001-09-22 KW - Impuls-Thermografie KW - Thermografie KW - Zerstörungsfreie Prüfung KW - Abkühlvorgang KW - Bauingenieurwesen KW - Beton KW - Simulation PY - 2001 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 77-CD SP - 1 EP - 10(?) PB - DGZfP CY - Berlin AN - OPUS4-1211 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Arndt, Ralf A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Weritz, Friederike A1 - Wiggenhauser, Herbert T1 - Structural investigation of concrete and masonry structures behind plaster by means of pulse phase thermography T2 - 7th International Conference on Quantitative Infrared Thermography (QIRT 2004) CY - Rhode-St-Genese, Belgien DA - 2004-06-05 KW - Pulse phase thermography KW - Nondestructive testing in civil engineering KW - Plaster KW - Concrete KW - Masonry KW - Delaminations KW - Voids PY - 2004 SP - I.3.1 EP - I.3.6 PB - Karman Institute for Fluid Dynamics CY - Rhode-St-Genese AN - OPUS4-4397 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Röllig, Mathias A1 - Arndt, Ralf A1 - Maierhofer, Christiane T1 - Quantitative Untersuchung von Fehlstellen in Beton mit der Impuls-Thermografie und der Puls-Phasen-Thermografie T2 - Thermografie-Kolloquium der Deutschen Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) CY - Stuttgart, Germany DA - 2005-09-22 PY - 2005 AN - OPUS4-11292 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Röllig, Mathias A1 - Arndt, Ralf A1 - Maierhofer, Christiane T1 - Quantitative Untersuchung von Fehlstellen in Beton mit der Impuls-Thermografie und der Puls-Phasen-Thermografie T2 - Thermographie-Kolloquium 2005 CY - Stuttgart, Deutschland DA - 2005-09-22 KW - Impulse-Thermografie KW - Puls-Phasen-Thermografie KW - Zerstörungsfreie Prüfung im Bauwesen KW - Beton KW - Fehlstellen PY - 2005 SN - 3-931381-68-4 N1 - Serientitel: DGZfP-Berichtsband – Series title: DGZfP-Berichtsband IS - 98-CD SP - 1(?) EP - 13(?) PB - DGZfP CY - Berlin AN - OPUS4-11684 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weritz, Friederike A1 - Arndt, Ralf A1 - Röllig, Mathias A1 - Maierhofer, Christiane A1 - Wiggenhauser, Herbert T1 - Investigation of concrete structures with pulse phase thermography N2 - The applicability of pulse phase thermography (PPT) for the investigation of structures is studied systematically on concrete test specimens and on a plastered sandstone column. In the test specimens, voids and delaminations are implemented in different depths and with different sizes, modelling real voids, honeycombing and debonding. Delaminations of plaster in concrete and masonry and behind tiles on concrete are investigated. PPT is based on the frequency analysis of the cooling down process of actively heated surfaces. Therefore, it is contactless and thus completely non-destructive (if overheating of the surface is prevented), fast and allows the inspection of large surface areas. The interpretation of amplitude and phase images gives semi-quantitative information about the observed defects. The phase images provide a deeper probing up to 10–15 cm in relation to the interpretation of the thermograms and to the amplitude images. In addition, the influence of surface inhomogeneities and non-uniform heating is reduced. KW - Pulse phase thermography KW - Impulse thermography KW - Concrete KW - Voids KW - Honeycombing PY - 2005 U6 - https://doi.org/10.1007/BF02481657 SN - 1359-5997 SN - 1871-6873 VL - 38 IS - 9 SP - 843 EP - 849 PB - Springer CY - Dordrecht AN - OPUS4-12300 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Arndt, Ralf A1 - Maierhofer, Christiane A1 - Röllig, Mathias T1 - Quantitative Pulse-Phase-Thermography for Masonry and Concrete Structures N2 - An advanced quantitative approach of pulse-phase-thermography for nondestructive testing in civil engineering is described in this contribution. The characteristic frequency of the maximum phase-contrast between defects and sound areas is used as a means for the characterization of its depth. The new approach is tested in the laboratory on concrete structures with defects of polystyrene. The surfaces of the structures were heated with IR-radiators for varying time periods. The presented investigations were funded by the Deutsche Forschungsgemeinschaft (DFG) and were carried out in co-operation with the Technical University of Berlin (TUB). T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - Quantitative non-destructive investigation KW - Impulse-thermography KW - Pulse-phase-thermography KW - Blind / characteristic frequency KW - Concrete PY - 2006 SN - 3-931381-86-2 SP - 1(?) EP - 8(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-13793 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Arndt, Ralf A1 - Helmerich, Rosemarie A1 - Maierhofer, Christiane A1 - Röllig, Mathias ED - Forde, M. T1 - Quantitative Pulse-Phase-Thermography for Composites and Concrete Structures N2 - The active approach for non-destructive-testing in Civil Engineering (NDT-CE) with infraredthermography (IR), developed at the Federal Institute for Materials Research and Testing (BAM), is described in part one of this contribution. The active IR-approach is based on the principles of impulse- (IT) and pulse-phase-thermography (PPT). The concept is a direct result of a research project at the BAM in cooperation with the Technical University of Berlin (TUB) and was funded by the Deutsche Forschungsgemeinschaft (DFG). In the second part results of the new thermography-scanning system (thermo-scanner) of BAM on debonding of multi-layered structures, especially carbon fibre reinforced plates (CFRP) on concrete are presented. Both, the thermo-scanner developed at BAM, and the investigations carried out, are part of the EU-Project Sustainable Bridges. In the third part of the paper the characteristic frequency of the optimum phase-contrast as a means for the characterization of defects’ depth in CE by means of PPT is introduced. A new quantitative approach is tested and discussed on concrete structures with defects of polystyrene and gas concrete. T2 - 11th International Conference and Exhibiton "Structural Faults and Repair - 2006" CY - Edinburgh, Scotland, UK DA - 2006-06-13 KW - Quantitative NDT KW - Impulse-thermography KW - Pulse-phase-thermography KW - Blind / characteristic frequency KW - Concrete KW - Thermo-scanner KW - CFRP-laminates KW - Debonding KW - Voids PY - 2006 SN - 0-947644-59-8 SP - 1(?) EP - 17(?) PB - Engineering Technics Pr., CY - Edingburgh AN - OPUS4-13794 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Arndt, Ralf A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Weritz, Friederike A1 - Wiggenhauser, Herbert T1 - Ortung von Putzablösungen auf Beton und Mauerwerk mit der Puls-Phasen-Thermografie N2 - Abstract In the recent years the application of infrared thermography and especially its active approaches lock-in thermography, impulse themography and pulse phase thermography (PPT) has gained more importance for non-destructive testing (NDT). In this paper it is demonstrated that PPT is very well suited for NDT in civil engineering. The method is based on pulse heating of the investigated specimen and on the observation of the cooling down process on its surface with an infrared camera. The transient behaviour is afterwards analysed with Fast Fourier Transformation, enabling the creation of phase and amplitude images with enhanced visualisation of the defects. Results of European and National (i.e. DFG) funded projects are presented, for example the detection of voids and inhomogeneities close to the surface and the localisation of delaminations on plastered concrete and masonry specimen. ZUSAMMENFASSUNG Im Rahmen eines von der Deutschen Forschungsgemeinschaft geförderten Vorhabens zur zerstörungsfreien Prüfung im Bauwesen wird in der Bundesanstalt für Materialforschung und -prüfung (BAM) in Zusammenarbeit mit der Technischen Universität Berlin (TUB) die Puls-Phasen-Thermografie (PPT) weiterentwickelt, bewertet und eingesetzt. Die durch die Impuls-Thermografie (IT) aufgenommenen Daten werden mittels Fast Fourier Transformation (FFT) bearbeitet. Die durch die FFT gewonnenen Phasenbilder reduzieren die Störeinflüsse von Oberflächeninhomogenitäten und ungleichmäßiger Erwärmung. Die dargestellten Ergebnisse zeigen deutlich, dass sich die PPT sehr gut zur zerstörungsfreien Prüfung im Bauwesen eignet. Insbesondere Inhomogenitäten im oberflächennahen Bereich, wie Ablösungen und Hohlstellen hinter Beschichtungen (Putz, CFK-Laminate etc.), aber auch Defekte in größeren Tiefen können zuverlässig geortet und bildgebend dargestellt werden. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 KW - Puls-Phasen-Thermografie KW - Zerstörungsfreie Prüfung im Bauwesen KW - Putz auf Beton und Mauerwerk KW - Ortung von Fehlstellen und Ablösungen PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/v89/v89.htm SN - 3-931381-55-2 SP - 1(?) EP - 10(?) PB - DGZfP CY - Berlin AN - OPUS4-5285 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Brink, Arne A1 - Röllig, Mathias A1 - Wiggenhauser, Herbert T1 - Detection of shallow voids in concrete structures with impulse thermography and radar N2 - New thermography systems enable the application of active investigation techniques, i.e. the observation of the cooling down process after heating the surface of a structure under investigation. Defects like voids in concrete having a different thermal diffusivity in comparison to the bulk material are visualised by different surface temperatures. The differences between temperature transient curves above sound regions and above inhomogeneities are expected to include information about the defect parameters. Experimental investigations with impulse thermography and radar on a concrete test specimen containing voids were analysed. Radar was used to determine the depth of the voids. The influence of size and depth of the voids on the temperature transient curves was studied for different heating times. The transient curves were also fitted with a simple semi-empirical model. KW - Impulse thermography KW - Radar KW - Non-destructive testing KW - Concrete KW - Civil engineering PY - 2003 SN - 0963-8695 VL - 36 IS - 4 SP - 257 EP - 263 PB - Butterworth-Heinemann CY - Oxford AN - OPUS4-11867 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Wiggenhauser, Herbert A1 - Brink, Arne A1 - Röllig, Mathias T1 - Quantitative numerical analysis of transient IR-experiments on buildings N2 - Impulse-thermography has been established as a fast and reliable tool in many areas of non-destructive testing. In recent years several investigations have been done to apply active thermography to civil engineering. For quantitative investigations in this area of application, finite difference calculations have been performed for systematic studies on the influence of environmental conditions, heating power and time, defect depth and size and thermal properties of the bulk material (concrete). The comparison of simulated and experimental data enables the quantitative analysis of defects. T2 - 7th International Workshop on Advanced Infrared Technology and Applications ; 7th AITA Conference CY - Pisa, Italy DA - 2003-09-09 KW - Impulse-thermography KW - Numerical simulation KW - Non-destructive testing KW - Concrete KW - Civil engineering PY - 2004 U6 - https://doi.org/10.1016/j.infrared.2004.03.022 SN - 1350-4495 VL - 46 IS - 1-2 SP - 173 EP - 180 PB - Pergamon Press CY - Oxford AN - OPUS4-4984 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kautek, Wolfgang A1 - Pentzien, Simone A1 - Röllig, Mathias A1 - Rudolph, Pascale A1 - Krüger, Jörg A1 - Maywald-Pitellos, C. A1 - Bansa, H. A1 - Grösswang, H. A1 - König, E. T1 - Near-UV laser interaction with contaminants and pigments on parchment: laser cleaning diagnostics by SE-microscopy, VIS-, and IR-spectroscopy PY - 2000 SN - 1296-2074 SN - 1778-3674 VL - 1 IS - sup.1 PB - Elsevier CY - Paris AN - OPUS4-5981 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Reischel, Mercedes A1 - Krankenhagen, Rainer A1 - Myrach, Philipp A1 - Röllig, Mathias A1 - Steinfurth, Henrik T1 - Anwendungsbreiche und Grenzen der Blitzthermografie - Entwicklung eines anwendungsnahen Standards T2 - DACH-Jahrestagung 2012 CY - Graz, Austria DA - 2012-09-17 KW - Blitzthermografie KW - CFK KW - Referenzprobekörper KW - Normung PY - 2012 SN - 978-3-940283-44-3 IS - DGZfP-BB 136 SP - Mi.2.C.1, 1 EP - 8 AN - OPUS4-28571 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Reischel, Mercedes A1 - Steinfurth, Henrik A1 - Röllig, Mathias A1 - Myrach, Philipp A1 - Ziegler, Mathias ED - Cardone, G. T1 - Development of reference test specimens for the standardisation of active thermography with flash excitation T2 - QIRT 11 - 11th International conference on Quantitative InfraRed Thermography CY - Naples, Italy DA - 2012-06-11 KW - Active thermography KW - Flash lamp KW - Standardisation KW - Reference test specimen PY - 2012 SP - 1 EP - 10(?) AN - OPUS4-26360 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Kalisch, U. A1 - Meinhardt, J. ED - Büyüköztürk, O. ED - Tasdemir, M.A. ED - Günes, O. ED - Akkaya, Y. T1 - Development and application of active thermography for monitoring of deterioration processes of historic structures N2 - As shown recently, the quantification of damage in historic masonry structures is possible by using active thermography. In this paper, a case study is presented concerning systematic studies of the determination of damage size and prognosis of damage increase inside a sandstone column by using different approaches of active thermography. Various heating sources as well as impulse and periodic heating have been compared. Reproducible investigations in regular time intervals for structural monitoring are possible. KW - Active thermography KW - Camera calibration KW - Historic structure KW - Monitoring KW - Sandstone PY - 2013 SN - 978-94-007-0722-1 U6 - https://doi.org/10.1007/978-94-007-0723-8_154 SN - 2211-0844 N1 - Serientitel: RILEM bookseries – Series title: RILEM bookseries VL - 6 SP - 1111 EP - 1116 PB - Springer AN - OPUS4-28263 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krankenhagen, Rainer A1 - Maierhofer, Christiane A1 - Röllig, Mathias ED - Büyüköztürk, O. ED - Tasdemir, M.A. ED - Günes, O. ED - Akkaya, Y. T1 - Thermographic investigation of delaminated plaster on concrete N2 - Active thermography is sensitive to inhomogeneities at and below the surface of objects investigated. Thus, it should be useful for detecting plaster delaminations on concrete. In this paper, the results of field and laboratory investigations into plaster-covered concrete were compared. For evaluating the bonding state of the plaster it is not sufficient to study only the thermal contrasts at the surface of the investigated objects. The experimental results suggest that the overall thermal behaviour has to be considered. KW - Active thermography KW - Bonding problems KW - Concrete KW - Plaster PY - 2013 SN - 978-94-007-0722-1 U6 - https://doi.org/10.1007/978-94-007-0723-8_112 SN - 2211-0844 N1 - Serientitel: RILEM bookseries – Series title: RILEM bookseries VL - 6 SP - 758 EP - 791 PB - Springer AN - OPUS4-28264 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Reischel, Mercedes A1 - Myrach, Philipp A1 - Steinfurth, Henrik A1 - Röllig, Mathias T1 - Anwendung der aktiven Thermografie zur zerstörungsfreien Prüfung von Faserverbundwerkstoffen T1 - Application of active thermography for non-destructive testing of fibre reinforced composites N2 - In diesem Beitrag werden Anwendungsbeispiele der aktiven Thermografie zur zerstörungsfreien Untersuchung von Faserverbundwerkstoffen vorgestellt. Ziel der Anwendung und Weiterentwicklung des Verfahrens ist nicht nur die Ortung, sondern auch die quantitative Beschreibung von Fehlstellen und Schäden. N2 - In this paper case studies are presented concerning non-destructive testing of fibre reinforced composites using active thermography. The main objective of the application and further development of the method is not only the detection, but also the quantitative characterisation of faults and damage. T2 - Temperatur 2013 - Verfahren und Geräte in der Temperatur- und Feuchtemesstechnik CY - Berlin, Germany DA - 05.06.2013 KW - CFK KW - Impact-Schaden KW - Aktive Thermografie KW - Blitzanregung KW - Temperaturleitfähigkeit PY - 2013 SN - 3-9810021-8-0 SP - 143 EP - 148 AN - OPUS4-28836 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Steinfurth, Henrik A1 - Ziegler, Mathias A1 - Heck, S.J. A1 - Scheuerlein, C. T1 - Aktive Thermografie zur zerstörungsfreien Prüfung von Lötverbindungen N2 - In diesem Beitrag werden die Möglichkeiten der Ortung von Fehlstellen in Cu Lötverbindungen unterhalb verschiedener Cu Blechdicken mit aktiver Thermografie demonstriert. Dabei wurden die Anregung mit Blitzlicht und die periodische Anregung mit der Lock-In Technik miteinander verglichen. Die Vor- und Nachteile der Anwendung unterschiedlicher IR-Kamerasysteme, einer gekühlten InSb-Quantendetektor IR-Kamera und einer Mikrobolometer IR-Kamera, werden dargestellt. Als objektives Kriterium wurde das SNR für unterschiedliche Fehlstellengrößen herangezogen. T2 - DGZfP-Jahrestagung 2011 CY - Bremen, Germany DA - 30.05.2011 KW - Aktive Thermografie KW - Blitzlichtanregung KW - Lock-In Anregung KW - Lötverbindung KW - Kupfer PY - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-249935 SN - 978-3-940283-33-7 IS - DGZfP-BB 127 (Di.1.C.1) SP - 1 EP - 8 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) AN - OPUS4-24993 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Steinfurth, Henrik A1 - Ziegler, Mathias A1 - Kreutzbruck, Marc A1 - Scheuerlein, C. A1 - Heck, S. T1 - Non-destructive testing of Cu solder connections using active thermography N2 - Impulse and lock-in thermography have been applied to detect delaminations of prototype solder joints, similar to those to be produced between Cu shunts and Cu busbar stabilisers at the Large Hadron Collider (LHC) at CERN. Two infrared cameras with different detector materials and with different spectral ranges and two excitation techniques have been tested and compared for their ability to detect delaminations behind 2 and 3 mm thick Cu shunts. We have analyzed the signal to noise ratio (SNR) for each detected defect and are able to detect defects down to a nominal edge length of 4 mm behind 2 mm thick Cu shunts by using fast impulse thermography and a camera with a microbolometer array. For the 3 mm thick Cu shunt, on the other hand, the nominal 4 mm defect is only visible in the lock-in thermography phase images and the highest SNR has been achieved with a cooled InSb-based camera. In addition, numerical simulations show the influence of the minimum detectable defect size on the shunt thickness and that the developed on-site testing technique is sufficient to find all defects that are detectable theoretically. KW - Active thermography KW - Solder joint KW - Copper KW - FFT KW - Signal-to-noise-ratio PY - 2012 U6 - https://doi.org/10.1016/j.ndteint.2012.07.010 SN - 0963-8695 VL - 52 SP - 103 EP - 111 PB - Butterworth-Heinemann CY - Oxford AN - OPUS4-27575 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Götschel, S. A1 - Weiser, M. A1 - Maierhofer, Christiane A1 - Richter, Regina A1 - Röllig, Mathias ED - Büyüköztürk, O. ED - Tasdemir, M.A. ED - Günes, O. ED - Akkaya, Y. T1 - Fast defect shape reconstruction based on the travel time in pulse thermography N2 - Pulse thermography is a non-destructive testing method based on ­infrared imaging of transient thermal patterns. Heating the surface of the structure under test for a short period of time generates a non-stationary temperature distribution and thus a thermal contrast between the defect and the sound material. In modern NDT, a quantitative characterization of hidden imperfections in materials is desired. In particular, defect depth and shape are of interest. The reconstruction of the defect from thermography data is a nonlinear inverse problem, and ill-posed. We propose an algorithm for the identification of subsurface defects based on the travel time of the reflected thermal pulse. Our work extends results by Lugin and Netzelmann, taking lateral thermal flows directly into account while retrieving the defect depth. This requires significantly less computational work. Quantitative information about the defect shape and depth is obtained. Application of our method to both thermography data generated by a finite element simulation and experimental heating of PVC test specimens with different defects yields good reconstruction of the actual defects. KW - Defect shape reconstruction KW - Finite element simulation KW - Pulsed thermography KW - Quantitative characterization KW - Thermal contrast KW - Inversion KW - Aktive Thermografie KW - Wanddicke KW - Rückwand KW - Minderdicken KW - Schichtdicken KW - Thermische Welle PY - 2013 SN - 978-94-007-0722-1 U6 - https://doi.org/10.1007/978-94-007-0723-8_11 SN - 2211-0844 N1 - Serientitel: RILEM bookseries – Series title: RILEM bookseries VL - 6 SP - 83 EP - 89 PB - Springer AN - OPUS4-27619 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Arndt, Ralf A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Hillemeier, B. A1 - Rieck, C. A1 - Scheel, H. A1 - Walther, A. T1 - Struktur- und Feuchteuntersuchungen von Bauteil- und Bauwerksoberflächen mit der Impuls-Thermografie T2 - Thermografie-Kolloquium der DGZfP CY - Stuttgart, Deutschland DA - 2005-09-22 KW - Impulse-Thermografie KW - Zerstörungsfreie Prüfung im Bauwesen KW - Beton KW - Mauerwerk PY - 2005 SN - 3-931381-68-4 N1 - Serientitel: DGZfP-Berichtsband – Series title: DGZfP-Berichtsband IS - 98-CD SP - 1(?) EP - 12(?) PB - DGZfP CY - Berlin AN - OPUS4-11491 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helmerich, Rosemarie A1 - Röllig, Mathias A1 - Schultz, A. A1 - Vielhaber, J. ED - Jan Bien, ED - Lennart Elfgren, ED - Jan Olofsson, T1 - Quality assurance of CRFP-strengthened reinforced concrete structures using automated thermographic investigation KW - Quality assurance KW - Bridge repair and strengthening KW - Railway bridges KW - Non-destructive testing KW - Automated scanning PY - 2007 SN - 978-83-7125-161-0 SP - 321 EP - 330 PB - Dolnoslaskie Wydawnictwo Edukacyjne CY - Wroclaw, Poland AN - OPUS4-16091 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lamprecht, I. A1 - Maierhofer, Christiane A1 - Röllig, Mathias T1 - Infrared Thermography and Thermometry of Phototropic Plants N2 - Thermal investigations using infrared (IR) thermometry and false colour thermography were carried out on flowering plants in the Botanical Garden of Berlin and in a private garden. Special interest went to phototropic plants that orient their blossoms towards a light source (mainly the sun) and within this group to solar trackers (heliotropism) that follow the path of the sun during the day. Best known among the latter is the sunflower. Bowl shaped flowers comparable to satellite disks focus the solar radiation effectively on their centre, resulting in a warming of the female organs at that point. Temperature differences above ambient can be as high as 10.7 K with a mean value of 6.0 K. Pollinating insects were often observed sun-basking in the bowls or on the flower disks attracted by energetic rewards in form of nectar and heat. KW - Insects KW - IR thermography KW - IR thermometry KW - Phototropism KW - Plants PY - 2007 U6 - https://doi.org/10.1007/s10973-006-7806-9 SN - 1388-6150 SN - 1418-2874 SN - 0368-4466 SN - 1572-8943 VL - 87 IS - 1 SP - 49 EP - 54 PB - Kluwer Academic Publ. CY - Dordrecht AN - OPUS4-16096 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helmerich, Rosemarie A1 - Niederleithinger, Ernst A1 - Milmann, Boris A1 - Wöstmann, Jens A1 - Röllig, Mathias A1 - Feldmann, Rüdiger A1 - Täljsten, B. ED - Masoud Motavalli, T1 - Near surface mounted CFRP-rods - preparation of reinforcing measures and quality control by means of non-destructive testing T2 - 4th International Conference on FRP Composites in Civil Engineering (CICE2008) CY - Zurich, Switzerland DA - 2008-07-22 PY - 2008 SN - 978-3-905594-50-8 SP - 1 EP - 6 AN - OPUS4-17747 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Arndt, Ralf T1 - Einfluss von Oberflächen- und Volumeneigenschaften auf die Zerstörungsfreie Prüfung von Beton und Mauerwerk mit aktiver Thermografie T2 - DACH-Jahrestagung 2008 - Zerstörungsfreie Materialprüfung, ZfP in Forschung, Entwicklung und Anwendung CY - St. Gallen, Schweiz DA - 2008-04-28 KW - Aktive Thermografie KW - Zerstörungsfreie Prüfung im Bauwesen KW - Beton KW - Mauerwerk KW - Hohlstellen KW - Kiesnester KW - Oberflächeneigenschaften KW - Feuchte PY - 2008 SN - 978-3-940283-09-2 IS - DGZfP-BB 113 (Mi.4.A.3) SP - 1 EP - 8 AN - OPUS4-18358 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Helmerich, Rosemarie A1 - Röllig, Mathias A1 - Maierhofer, Christiane A1 - Schultz, A. A1 - Vielhaber, J. A1 - Loehr, M. T1 - Non-destructive CFRP-bond evaluation T2 - 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-8) CY - Patras, Greece DA - 2007-07-16 KW - Bond behaviour KW - Impulse thermography KW - Effectiveness of repair KW - CFRP-strengthening KW - Large scale testing KW - Validation KW - Acoustic emission KW - Combination of NDT-methods PY - 2007 SP - 106-107 (2-24) CY - Patras, Greece AN - OPUS4-15706 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Arndt, Ralf A1 - Röllig, Mathias A1 - Helmerich, Rosemarie A1 - Walther, A. A1 - Hillemeier, B. A1 - Rieck, C. T1 - Quantification of Voids and Elaminations in Real Concrete and Masonry Structures with Active Thermography: Case Studies T2 - 8th International Conference on Quantitative InfraRed Thermography (QIRT 2006) CY - Padova, Italy DA - 2006-06-28 KW - Non-destructive testing in civil engineering KW - Active thermography KW - Pulse-phase thermography KW - Plaster KW - Tiles KW - Asphalt KW - Numerical simulation PY - 2006 UR - http://qirt.gel.ulaval.ca/archives/qirt2006/papers/049.pdf SP - 49, 1 EP - 10 (?) CY - Padova, Italy AN - OPUS4-15710 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Krause, Martin A1 - Wöstmann, Jens A1 - Röllig, Mathias A1 - Arndt, Ralf A1 - Streicher, Doreen A1 - Kohl, C. ED - L. Binda, ED - M. di Prisco, ED - R. Felicetti, T1 - Influence of concret properties on the calibration of radar, ultrasonics and active thermography T2 - 1st International RILEM Conference, on Site Assessment of Concrete, Masonry and Timber Structures (SACoMaTiS 2008) CY - Varenna, Italy DA - 2008-09-01 KW - Concrete KW - Radar KW - Ultrasonics KW - Active thermography KW - Velocity calibration PY - 2008 SN - 978-2-35158-062-2 VL - 1 IS - PRO 59 SP - 15 EP - 24 PB - RILEM Publications AN - OPUS4-18033 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Wöstmann, Jens A1 - Trela, Christiane A1 - Röllig, Mathias ED - L. Binda, ED - M. di Prisco, ED - R. Felicetti, T1 - Investigation of moisture content and distribution with radar and active thermography T2 - 1st International RILEM Conference, on Site Assessment of Concrete, Masonry and Timber Structures (SACoMaTiS 2008) CY - Varenna, Italy DA - 2008-09-01 KW - Radar KW - Active thermography KW - Non-destructive testing KW - Moisture KW - Masonry PY - 2008 SN - 978-2-35158-062-2 VL - 1 IS - PRO 59 SP - 411 EP - 420 PB - RILEM Publications AN - OPUS4-18032 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Arndt, Ralf A1 - Röllig, Mathias T1 - Aktive Thermografie zur zerstörungsfreien Ortung von Ablösungen und Fehlstellen in Beton und Mauerwerk T2 - DGZfP-Fachtagung Bauwerksdiagnose "Praktische Anwendungen Zerstörungsfreier Prüfungen" CY - Berlin, Deutschland DA - 2006-02-22 KW - Zerstörungsfreie Prüfung im Bauwesen KW - Aktive Thermografie KW - Beton KW - Historisches Mauerwerk KW - Praktische Anwendungen PY - 2006 SN - 3-931381-71-4 SP - 1 EP - 12(?) PB - DGZfP CY - Berlin AN - OPUS4-14120 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Arndt, Ralf A1 - Borchardt, Kerstin A1 - Hasenstab, Andreas A1 - Röllig, Mathias A1 - Wöstmann, Jens ED - Radic, J. ED - Rajcic, V. ED - Zarnic, R. T1 - Structural assessment with radar and active thermography T2 - Conference and Brokerage Event "The Construction Aspects of the Heritage Protection" CY - Dubrovnik, Croatia DA - 2006-10-14 KW - Non-destructive testing in civil engineering KW - Radar KW - Active thermography KW - Historic structures KW - Masonry KW - Stone KW - Wood KW - Plaster PY - 2006 IS - CD-ROM SP - 77 EP - 86 PB - SECON (Structural Engineering Conferences) CY - Dubrovnik AN - OPUS4-14255 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lamprecht, I. A1 - Maierhofer, Christiane A1 - Röllig, Mathias T1 - A thermographic promenade through the Berlin Botanic Garden N2 - False colour infrared (IR) thermography was performed on a sunny summer day in the Berlin Botanic Garden. The main interest focused on blossoms of different size, colours and shapes: disk-, bowl- and funnel-like anatomy demonstrating various modes of light absorption and heating-up during the day. Some of the flowers were phototropic or even solar tracking. Blossom temperatures ranged from 18.0 to 33.3 °C (mean 26.3 ± 2.5 °C, S.D., n = 37) at 21 °C air temperature. Several thermograms showed honey- and bumblebees also. In some cases the results are compared with those of a contact-free IR thermometry. One winter- and one late-spring-flowering plant are included in the overview. KW - Infrared KW - Insects KW - Plants KW - Thermography KW - Thermometry PY - 2006 U6 - https://doi.org/10.1016/j.tca.2006.02.039 SN - 0040-6031 SN - 1872-762X VL - 446 IS - 1-2 SP - 4 EP - 10 PB - Elsevier CY - Amsterdam AN - OPUS4-14433 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helmerich, Rosemarie A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Arndt, Ralf A1 - Vielhaber, J. ED - Cruz, P. ED - Frangopol, D. T1 - Bond quality survey of loaded RC beams with CFRP-plate repair using impulse-thermography T2 - Bridge Maintenance, Safety, Management, Life-Cycle Performance and Cost CY - Porto, Portugal DA - 2006-07-16 KW - Thermography KW - Quality control KW - Bonding KW - Carbon fibre KW - Concrete bridges KW - Repair KW - Strengthening PY - 2006 SN - 0-415-40315-4 N1 - Serientitel: Balkema proceedings and monographs in engineering, water and earth sciences – Series title: Balkema proceedings and monographs in engineering, water and earth sciences SP - 331-332 (Book)/ 9 pages (CD-ROM) PB - Taylor & Francis CY - London AN - OPUS4-14412 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Arndt, Ralf A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Walsdorf-Maul, Manuela T1 - Quantitative Phasen- und Amplitudenauswertung im Frequenzbereich für aktive Thermografie mit Rechteckimpuls-Erwärmung N2 - Nach einer Einführung in die Puls-Phasen-Thermografie (PPT) wird ein neuer Ansatz für die Defekttiefenbestimmung im Frequenzraum mittels der sogenannten charakteristischen Frequenz des minimalen Phasen- und Amplitudenkontrastes zwischen Fehlstelle und ungestörtem Bereich entwickelt und anhand von systematischen Untersuchungen an Probekörpern der Bundesanstalt für Materialforschung und -prüfung und ergänzenden Simulationsrechnungen überprüft. Die mit Rechteckimpuls-Spektral-Thermografie (RST) bezeichnete Methode, die auch als eine Rechteckimpuls-Thermografie (RIT) im Frequenzbereich oder eine durch Amplitudenauswertung ergänzte PPT für Rechteckimpulserwärmung verstanden werden kann, soll die existierenden Ansätze ergänzen und bietet eine Alternative für die Tiefenbestimmung von Defekten bei Messungen mit langen Erwärmungs- und Beobachtungszeiten, wie sie bei Anwendung von aktiver Thermografie im Bauwesen häufig vorkommen. T2 - Thermografie-Kolloquium 2007 CY - Stuttgart, Deutschland DA - 2007-09-27 KW - Puls-Phasen-Thermografie KW - Rechteckimpuls-Erwärmung KW - Zerstörungsfreie Prüfung im Bauwesen KW - Quantitative Methode PY - 2007 SN - 978-3-940283-03-0 IS - 107-CD SP - 52 EP - 60 AN - OPUS4-16128 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Arndt, Ralf A1 - Hillemeier, B. A1 - Maierhofer, Christiane A1 - Rieck, C. A1 - Röllig, Mathias A1 - Scheel, H. A1 - Walther, A. T1 - Zerstörungsfreie Ortung von Fehlstellen und Inhomogenitäten in Bauteilen mit der Impuls-Thermografie KW - Impuls-Thermografie KW - Puls-Phasen-Thermografie KW - Zerstörungsfreie Prüfung KW - Ortung von Fehlstellen KW - Ablösungen und Verpressfehler PY - 2004 SN - 0005-6820 SN - 1437-0999 SN - 0341-1052 SN - 0932-6359 SN - 0932-8351 VL - 81 IS - 10 SP - 786 EP - 793 PB - Ernst CY - Berlin AN - OPUS4-4572 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helmerich, Rosemarie A1 - Röllig, Mathias A1 - Maierhofer, Christiane A1 - Schultz, A. ED - Vincentsen, L. T1 - Bond Control in CFRP-strengthened RC-structures using Active Thermography T2 - Conference on Operation, Maintenance and Rehabilitation of Large Infrastructure Projects, Bridges and Tunnels CY - Copenhagen, Denmark DA - 2006-05-15 KW - Quality control KW - Impulse-Thermography (IR) KW - Debonding KW - Supervision of CFRP-Strengthening KW - Laboratory Testing PY - 2006 SN - 87-91044-03-0 SP - 1(?) EP - 8(?) PB - IABSE CY - Zürich AN - OPUS4-12407 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Arndt, Ralf A1 - Röllig, Mathias A1 - Rieck, C. A1 - Walther, A. A1 - Scheel, H. A1 - Hillemeier, B. T1 - Application of impulse-thermography for non-destructive assessment of concrete structures N2 - Impulse-thermography is an active method for quantitative investigations of the near surface region of various structures. It has recently been applied and optimised to applications in civil engineering. By using either an internal or external heat source, parts of the structure under investigation are heated up and the transient heat flux is observed by recording the temperature change at the surface as a function of time. This method is very well suited for the detection of voids and honeycombing in concrete, up to concrete covers of 10 cm as well as for the location of delaminations in multi-layered systems (e.g. plaster on concrete, CFRP-laminates on concrete, asphalt on concrete). Also safety relevant defects like voids in tendon ducts and cracks in concrete could be recognised. KW - Non-destructive testing KW - Impulse-thermography KW - Concrete KW - CFRP-laminates KW - Delamination KW - Tendon duct KW - Voids KW - Compaction faults PY - 2006 U6 - https://doi.org/10.1016/j.cemconcomp.2006.02.011 SN - 0958-9465 SN - 1873-393X VL - 28 IS - 4 SP - 393 EP - 401 PB - Elsevier CY - Barking, Essex AN - OPUS4-12359 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Helmerich, Rosemarie A1 - Milmann, Boris A1 - Wöstmann, Jens A1 - Röllig, Mathias A1 - Kind, Thomas A1 - Lai, W. T1 - Qualitätssicherung für textilfaserverstärkten Beton T2 - 5. Anwendertagung Textilbeton CY - Friedrichshafen, Germany DA - 2013-09-24 KW - Textilfaserverstärkter Beton KW - Zerstörungsfreie Prüfung KW - Ultraschall-Echo KW - Radar-Echo PY - 2013 VL - 9 SP - 22 AN - OPUS4-29512 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Myrach, Philipp A1 - Reischel, Mercedes A1 - Steinfurth, Henrik A1 - Röllig, Mathias A1 - Kunert, M. T1 - Characterizing damage in CFRP structures using flash thermography in reflection and transmission configurations N2 - Carbon fiber reinforced polymer (CFRP) specimens with artificial delaminations and with impact damage have been characterized using active thermography with flash excitation. Systematic investigations have been performed in four different experimental configurations of flash lamps and infrared (IR) camera in transmission as well as in reflection alignment. It is shown here that the diffusivities determined for the sound and for the damaged areas give a good measure for damage characterization. Although reflection measurements also give information about defect depth, reflection measurements from only one side are not sufficient for assessing the whole cross section of the specimens. Thus, depending on sample thickness the lateral size of damage could only be determined from reflections measurements from both sides or from transmission measurements. In this paper, measurement accuracy and limits of flash thermography for the investigation of CFRP specimens are presented in detail together with quantitative data concerning the defects. KW - D. Non-destructive testing KW - D. Thermal analysis KW - B. Thermal properties KW - B. Delamination KW - Flash thermography PY - 2014 U6 - https://doi.org/10.1016/j.compositesb.2013.09.036 SN - 1359-8368 VL - 57 SP - 35 EP - 46 PB - Elsevier CY - Oxford [u.a.] AN - OPUS4-29582 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Wöstmann, Jens A1 - Röllig, Mathias A1 - Köpp, Christian A1 - Borchardt, Kerstin ED - Mateja Golez, T1 - Non-destructive testing of walls and ground of the Carthusian monastery at Zice KW - Non-destructive testing KW - Active thermography KW - Radar KW - Brick KW - Stone KW - Masonry PY - 2009 SN - 978-961-90366-4-8 SP - 101 EP - 117 CY - Ljubljana, Slovenia AN - OPUS4-19742 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Mecke, R. A1 - Seidl, T. A1 - Schiller, M. A1 - Kalisch, U. A1 - Meinhardt, J. A1 - Hennen, C. T1 - Entwicklung und Kombination optischer und thermografischer zerstörungsfreier Messverfahren zur Bewertung von Bauteiloberflächen und -grenzflächen N2 - Die Kombination und direkte Datenfusion der Ergebnisse von 3DLaserscannern zur Erfassung der Geometrie und der aktiven Thermografie zur Ortung verdeckter Hohlstellen und anderer Inhomogenitäten liefert umfassende quantitative Informationen über die Zuordnung von Merkmalen und Veränderungen eines Bauteils. In diesem Beitrag werden die erforderlichen Verfahrensspezifikationen, das Prinzip der Datenüberlagerung und ausgewählte Fallstudien aus der Denkmalpflege vorgestellt. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Mi.1.C.1) SP - 1 EP - 9 CY - Berlin AN - OPUS4-21870 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Mecke, R. A1 - Schiller, M. A1 - Seidl, T. A1 - Kalisch, U. A1 - Hennen, C. A1 - Meinhardt, J. T1 - Bewertung von Schäden an historischen Bauteilen mit aktiver Thermografie und 3D-Laserscanner N2 - Sowohl in der Denkmalpflege als auch in anderen Anwendungsbereichen der zerstörungsfreien Prüfung können größere kostenintensive Erhaltungs- und Instandsetzungsmaßnahmen durch das frühzeitige Erkennen und Einschätzen von Schäden vermieden werden. Eine derartige vorbeugende Instandsetzung ist jedoch nur möglich, wenn häufige Inspektionen kostengünstig und schnell durchgeführt werden können. Systematische Methoden zur Beobachtung und Erfassung von Prozessen über einen längeren Zeitraum sowie deren Überwachung werden unter dem Begriff "Monitoring" zusammengefasst. KW - Aktive Thermografie KW - 3D-Laserscanner KW - Monitoring KW - Historische Bauteile KW - Datenfusion PY - 2011 IS - Februar SP - 51 EP - 56 PB - Ernst & Sohn CY - Berlin AN - OPUS4-23516 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Mecke, R. A1 - Schiller, M. A1 - Kalisch, U. A1 - Meinhardt, J. A1 - Hennen, C. T1 - Kombination der aktiven Thermografie mit laserbasierten Verfahren zur Erfassung von 3D-Geometrien in der Denkmalpflege T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2010-02-18 KW - ZfPBau KW - Denkmalpflege KW - Statue KW - Aktive Thermografie KW - Lichtschnittverfahren KW - Laserscanner KW - Verfahrenskombination PY - 2010 SN - 978-3-940283-24-5 IS - DGZfP-BB 121 (Poster 06) SP - 1 EP - 8 CY - Berlin AN - OPUS4-21063 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Maierhofer, Christiane A1 - Höhn, J. T1 - Thermografie am Schichtsystem Putz auf Beton im Labor und in der Praxis T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2010-02-18 KW - ZfPBau KW - Putzablösung KW - Betondecke KW - Aktive Thermografie PY - 2010 SN - 978-3-940283-24-5 IS - DGZfP-BB 121 (Poster 07) SP - 1 EP - 9 CY - Berlin AN - OPUS4-21064 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Röllig, Mathias A1 - Steinfurth, Henrik A1 - Ziegler, Mathias T1 - Untersuchung von Hochleistungs-LEDs für den Einsatz in der zerstörungsfreien Prüfung mittels Thermografie N2 - Für die optische Erwärmung von Prüfteiloberflächen sind Blitz- und Halogenlampen Stand der Technik. Der Vorteil dieser Wärmequellen liegt in ihren relativ geringen Anschaffungskosten bei gleichzeitig hohen Leistungsdichten am Prüfobjekt. Nachteilig ist bei den Halogenlampen die Limitierung der möglichen Modulationsffequenz auf ca. 1 Hz für die Anwendung dieser Quelle in der Lockin-Thermografie. Blitzlampen bieten für gewöhnlich nur eine feste Blitzdauer bei einer geringen Taktrate. Beide Anregungsquellen müssen in Reflexionsanordnung mit Filtern betrieben werden um die entstehende thermische Eigenstrahlung als Störquelle zu eliminieren. Wir stellen Untersuchungen an Hochleistungs-LEDs für den Einsatz in der aktiven Thermografie vor. Diese Lichtquellen werden durch die rasante Entwicklung der möglichen Leistungsdichten nun auch für die thermografische ZfP interessant. Sie zeigen ähnlich dem Laser eine schmale und auf den Werkstoff abstimmbare spektrale Verteilung der Strahlungsleistung bei moderaten Kosten. Die zugrunde liegende Elektrolumineszenz generiert kaum Wärmestrahlung und ermöglicht dadurch die Prüfung während des Erwärmungsvorganges ohne größeren Aufwand. Modulationsfrequenzen über 100 Hz mit thermischen Eindringtiefen < 1 mm sind möglich. Dadurch qualifizieren sich die LEDs zur Anwendung in der Lockin-Thermografie von Metallen und zur oberflächennahen Prüfung von Schichtsystemen. Durch die fast verzögerungsffeie Reaktion der LED auf das steuernde Signal sind nahezu beliebige zeitliche Anregungsformen möglich. Mit solch flexiblen Anregungsformen ließen sich bereits bei den photothermischen Verfahren erfolgreich höhere Tiefenreichweiten und -auflösungen gegenüber den klassischen Methoden der monofrequenten Lockin - und energiereichen Kurzimpuls-Anregung erzielen. Untersuchungen dieser Möglichkeiten im praktischen Einsatz der HochleistungsLEDs werden vorgestellt und mit herkömmlichen Lichtquellen verglichen. T2 - Thermographie-Kolloquium 2013 CY - Leinfelden-Echterdingen, Germany DA - 2013-09-26 KW - Thermografie KW - Hochleistungsleuchtdioden KW - Hohe Prüfraten KW - Schnelle Modulationsfrequenzen PY - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-293975 SN - 978-3-940283-52-8 VL - DGZfP-BB 143 SP - Vortrag 3, 1 EP - 8 AN - OPUS4-29397 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Riemer, Stefanie A1 - Gower, M. A1 - Baker, G. A1 - Lodeiro, M. A1 - Knazovicka, L. A1 - Blahut, A. A1 - Monte, C. A1 - Adibekyan, A. ED - Gutschwager, B. T1 - Characterisation of artificial and natural defects in fibre reinforced plastics designed for energy applications using active thermography N2 - Amongst various other NDT methods, within the EMRP-project ‘VITCEA’ active thermography is validated for testing of CFRP and GFRP structures constructed for energy application. In this contribution, the optical and thermal properties of CFRP and GFRP reference defect artefact (RDA) and natural defects artefact (NDA) test specimens are characterized. Different excitation techniques and techniques for data analysis are compared for optimizing the number of detected defects. T2 - 19th World Conference on Non-destructive Testing (WCNDT) CY - Munich, Germany DA - 13.06.2016 KW - Active thermography KW - CFRP KW - GFRP KW - Artificial and natural defects PY - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-370207 UR - http://www.ndt.net/article/wcndt2016/papers/we2i4.pdf SN - 978-3-940283-78-8 VL - BB 158 SP - Paper we2i4, 1 EP - 9 PB - DGZfP CY - Berlin AN - OPUS4-37020 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Steinfurth, Henrik A1 - Augustin, Sven A1 - Mecke, R. A1 - Schiller, M. A1 - Kernchen, A. A1 - Kalisch, U. A1 - Meinhardt, J. A1 - Hennen, C. A1 - Groll, E. T. A1 - Arnold, T. T1 - Characterisation of historic façades using active thermography with solar heating and optical methods N2 - Active thermography is well suited for the detection of delaminations and cracks in façade elements like plaster and tiles. Not only artificial heating but also solar heating can be used if the adjustment of the façade and the weather conditions are suitable. Optical methods like laser scanners, photogrammetric methods and crack tracking sensors are providing geometrical 3D data which can be used for a 3D mapping of thermograms and for providing data with higher geometrical resolution. Thus, by the combination and fusion of these data, a comprehensive mapping and monitoring of damages of façade systems is possible. T2 - 19th World Conference on Non-destructive Testing (WCNDT) CY - München, Germany DA - 13.06.2016 KW - Non-destructive testing KW - Active thermography KW - Solar heating KW - Historic facades KW - Optical methods PY - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-366833 SN - 978-3-940283-78-8 VL - BB 158 SP - Mo.2.C.2., 1 EP - 8 PB - DGZfP CY - Berlin AN - OPUS4-36683 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Doroshtnasir, Manoucher A1 - Worzewski, Tamara A1 - Krankenhagen, Rainer A1 - Röllig, Mathias T1 - On-site inspection of potential defects in wind turbine rotor blades with thermography N2 - Recurrent non-destructive testing inspections are necessary to prevent damages in wind turbine rotor blades, but so far, there is no established method that detects defects in blades from greater distances – although this becomes increasingly important in the context of hardly accessible offshore wind parks. Thermography is a promising method for detecting subsurface defects, but various challenges arise when this method is applied on-site to turbine blades in operation. Disturbing influences from the environment easily lead to a misinterpretation of thermograms (i.e. thermographic images), such as thermal signatures caused by reflections, dirt and other superficial inhomogeneities. This study explores several problems and effects that arise, when (rotating) blades are monitored with thermography. It will then be demonstrated that a meaningful defect inspection in this scenario is essentially restricted to a procedure following three steps: Firstly, calculating the so-called difference thermograms of all blade pairs for eliminating disturbing reflections. Secondly, identifying potentially relevant signals, which are associated neither with structural features nor with dynamical effects, and the identification of these signals’ allocations (through comparison of all difference thermograms with each other). And thirdly, comparing these signals with (processed) photos for excluding incorrect indications by surface effects. Unlike common thermographic analysis methods, which typically only include an aspect of this procedure, the composition presented in this contribution constitutes an advanced technique for minimizing disturbing influences in thermograms. The proposed thermographic technique enables the detection of potential subsurface defects within rotating rotor blades from greater distances – such as from the ground, air crafts or vessels. KW - NDT KW - Thermographic inspection KW - Wind turbine rotor blade KW - GFRP PY - 2016 U6 - https://doi.org/10.1002/we.1927 SN - 1095-4244 VL - 19 IS - 8 SP - 1407 EP - 1422 PB - John Wiley & Sons, Ltd. CY - Hoboken, New Jersey, USA AN - OPUS4-37291 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Ehrig, Karsten A1 - Meinel, Dietmar A1 - Céspedes-Gonzales, G. T1 - Validation of flash thermography using computed tomography for characterizing inhomogeneities and defects in CFRP structures N2 - Active thermography is an efficient non-destructive testing method for investigating the internal structure of larger carbon fiber reinforced plastic (CFRP) components as well as smaller CFRP components in mass customization. The method can be applied contactless and automated. This study contains systematic investigations of CFRP structures with typical defects and inhomogeneities occurring during production by means of flash thermography in reflection and transmission configuration and by computed tomography (CT). The latter one was used as a reference method, since also very small defects at larger depth can be visualized with high spatial resolution. The CFRP structures consist of plates which contain metallic and non-metallic inclusions, contaminations with glue or wax rests, areas with inhomogeneous re-injection of dry parts, fiber misalignments, and fiber damages. Further on, two specimens have been glued together with different artificial inhomogeneities of the four glue beads. The results of the applied methods are compared and the advantages and disadvantages of each configuration are discussed based on the detectability of the inhomogeneities. It is shown that although CT has led to best contrasts and spatial resolutions in displaying the inhomogeneities and inclusions, flash thermography is very well suited to detect most of these structures. Considering that flash thermography can be applied on-site and has a high potential for automation and for a fast and efficient testing, it can be highly recommended for quality assurance during and after production of CFRP structures. KW - A. Laminates KW - B. Defects KW - D. Radiography KW - D. Thermal analysis PY - 2014 U6 - https://doi.org/10.1016/j.compositesb.2014.04.027 SN - 1359-8368 VL - 64 SP - 175 EP - 186 PB - Elsevier CY - Oxford [u.a.] AN - OPUS4-30771 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Worzewski, Tamara A1 - Krankenhagen, Rainer A1 - Doroshtnasir, Manoucher A1 - Röllig, Mathias A1 - Steinfurth, Henrik A1 - Maierhofer, Christiane T1 - IKARUS - Forschung zur thermografischen Zustandsinspektion von Offshore Rotorblättern N2 - Eine Arbeitsgruppe der BAM in der Abteilung für Zerstörungsfreie Prüfung forscht seit 2011 an verschiedenen technischen Fragestellungen, die sich aus dem thermografischen Lösungsansatz ergeben. Zum Beispiel werden spezielle Prüfkörper aus GFK im Labor unter dem Gesichtspunkt untersucht, inwieweit (materielle) innere Strukturen und äußerlich nicht sichtbare Schäden mit Thermografie offenbart werden können. Hierbei werden verschiedene Anregungs- und Auswertungstechniken auf ihre Eignung für diese Problemstellung untersucht. Der folgende Beitrag erläutert einige technische Schwierigkeiten bei der praktischen Anwendung der geplanten Inspektionsmethode und stellt einen erfolgversprechenden Lösungsansatz vor. KW - Zerstörungsfreie Prüfung KW - Rotorblatt KW - Windkraftanlage KW - Thermografie KW - IKARUS PY - 2014 SN - 0941-3898 VL - 34 IS - 1 SP - 20 EP - 22 PB - Verl. Natürl. Energie CY - Seevetal AN - OPUS4-30245 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Myrach, Philipp A1 - Röllig, Mathias A1 - Steinfurth, Henrik T1 - Validation of active thermography techniques for the characterization of CFRP structures N2 - Lockin thermography as well as flash thermography are very well suited for non-destructive testing and characterisation of inhomogeneities and damage in CFRP structures. Both methods are applied more and more in research and industry, but until know it is not clear which are the advantages of one method against the other. In this paper, results of two research projects concerning the validation and standardisation of both methods are presented. Three different types of CFRP test specimens consisting of well-defined flat bottom holes, of artificial delaminations made of PTFE plates embedded in CFRP and of real impact damage have been investigated systematically with flash and lockin excitation. Here, the phase images of both methods are compared qualitatively as well as quantitatively. T2 - ECNDT 2014 - 11th European conference on non-destructive testing CY - Prague, Czech Republic DA - 06.10.2014 KW - Active thermography KW - Flash KW - Lockin KW - CFRP KW - Flat bottom holes KW - Delamination KW - Impact damage PY - 2014 UR - http://www.ndt.net/events/ECNDT2014/app/content/Paper/199_Maierhofer_Rev2.pdf SN - 978-80-214-5018-9 SP - Paper 199, 1 EP - 10 AN - OPUS4-31940 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Worzewski, Tamara A1 - Krankenhagen, Rainer A1 - Doroshtnasir, Manoucher A1 - Steinfurth, Henrik A1 - Röllig, Mathias A1 - Maierhofer, Christiane T1 - Thermografie unter wechselnden Witterungsbedingungen zur Zustandsüberwachung eines Windkraftanlagen-Rotorblattes N2 - Weltweit errichtet man zunehmend Offshore-Windkraftanlagen (WKA). Diese auf hoher See errichteten WKA benötigen geeignete Wartungs- und Instandhaltungskonzepte. Bestehende Konzepte aus dem Landbereich geraten unter Offshore-Bedingungen an ihre Grenzen oder lassen sich überhaupt nicht anwenden, daher müssen neue Ansätze erprobt werden. Im Rahmen des BMBF geförderten Forschungsprojektes "IKARUS" ist das Potential der (berührungslosen) thermografischen Fernerkundung zur Zustandsüberwachung der Rotorblätter von WKA zu untersuchen. Veränderungen der Umgebungsbedingungen wie z.B. solare Einstrahlung oder der Tagestemperaturgang führen zu veränderlichen Energieeinträgen in ein Objekt, die beim Vorhandensein von Inhomogenitäten im Material oder Strukturmerkmalen thermische Signaturen hervorrufen können. Ebenso können Veränderungen der Witterungsbedingungen dazu führen, dass bereits vorhandene thermische Signaturen wieder ausgelöscht werden. Daher ist es unbedingt notwendig, systematische Langzeitmessungen bei verschiedenen Umgebungsbedingungen durchzuführen, um Fehlinterpretationen zu vermeiden. In diesem Beitrag wird anhand von Laborversuchen und Simulationen zunächst die grundsätzliche Eignung des thermografischen Ansatzes für glasfaserverstärkte Kunststoffe (GFK), aus denen die Außenhüllen der Rotorblätter gefertigt sind, demonstriert. Hierbei werden unterschiedliche Arten von Defekten an GFK vorgestellt, die zu thermischen Signaturen an Rotorblättern führen können. Anschließend werden Zwischenergebnisse aus einem laufenden Langzeitversuch zu einem demontierten Rotorblattsegment vorgestellt, welches unter verschiedenen Witterungsbedingungen und zu verschiedenen Tages- und Jahreszeiten thermografisch beobachtet wurde. T2 - DGZfP-Jahrestagung 2014 CY - Potsdam, Germany DA - 26.05.2014 PY - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-309000 SN - 978-3-940283-61-0 IS - DGZfP-BB 148 SP - Di.2.B.3, 1 EP - 10 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) AN - OPUS4-30900 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Hasenstab, A. A1 - Schönitz, A. T1 - Praktische Anwendung der aktiven Thermografie zur Untersuchung von Stahlbetonbauteilen T2 - Fachtagung Bauwerksdiagnose 2008 - Praktische Anwendungen Zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2008-02-21 KW - Aktive Thermografie KW - Stahlbetonunterzüge KW - Verdichtungsmängel KW - Fallstudie PY - 2008 SN - 978-3-940283-08-5 N1 - Serientitel: Berichtsband der Deutschen Gesellschaft für Zerstörungsfreie Prüfung – Series title: Berichtsband der Deutschen Gesellschaft für Zerstörungsfreie Prüfung IS - 112 SP - 1 EP - 9 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung CY - Berlin AN - OPUS4-19057 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Maierhofer, Christiane A1 - Röllig, Mathias T1 - Application of active thermography to the detection of safety relevant defects in civil engineering structures T2 - IRS² 2009 - 11th International conference on infrared sensors & systems CY - Nürnberg, Germany DA - 2009-05-26 KW - Non-destructive testing KW - Active thermography KW - Pulse-phase thermography KW - Concrete KW - Voids KW - Cracks KW - CFRP delaminations PY - 2009 SN - 978-3-9810993-6-2 IS - Chapter 2.2 SP - 215 EP - 220 AN - OPUS4-19873 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Röllig, Mathias T1 - Active thermography for the characterization of surfaces and interfaces of historic masonry structures T2 - NDTCE ´09 - 7th International symposium on nondestructive testing in civil engineering CY - Nantes, France DA - 2009-06-30 KW - Pulse-phase-thermography KW - Infrared radiation KW - Heating KW - Delamination KW - Plaster PY - 2009 SN - 978-2-7208-2542-5 SN - 1628-4704 SP - 1 EP - 6(?) AN - OPUS4-19874 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dreßler, Martin A1 - Röllig, Mathias A1 - Schmidt, Martin A1 - Maturilli, A. A1 - Helbert, J. T1 - Temperature distribution in powder beds during 3D printing N2 - Purpose – This purpose of this paper is to report about the temperature distribution in metal and ceramic powder beds during 3D printing. The differing powders are thoroughly characterized in terms of thermal conductivity, thermal diffusivity, emissivity spectra and density. Design/methodology/approach – The temperature distribution was measured in a 3D printing appliance (Prometal R1) with the help of thin thermocouples (0.25 mm diameter) and thermographic imaging. Temperatures at the powder bed surface as well as at differing powder bed depths were determined. The thermal conductivity, thermal diffusivity and emissivity spectra of the powders were measured as well. Numerical simulation was used to verify the measured temperatures. Findings – The ceramic powder heated up and cooled down more quickly. This finding corresponds well with numerical simulations based on measured values for thermal conductivity and thermal diffusivity as well as emissivity spectra. An observed color change at the metal powder has only little effect on emissivity in the relevant wavelength region. Research limitations/implications – It was found that thermocouple-based temperature measurements at the powder bed surface are difficult and these results should be considered with caution. Practical implications – The results give practitioners valuable information about the transient temperature evolution for two widely used but differing powder systems (metal, ceramic). The paramount importance of powder bed porosity for thermal conductivity was verified. Already small differences in thermal conductivity, thermal diffusivity and hence volumetric heat capacity lead to marked differences in the transient temperature evolution. Originality/value – The paper combines several techniques such as temperature measurements, spectral emissivity measurements, measurements of thermal conductivity and diffusivity and density measurements. The obtained results are put into a numerical model to check the obtained temperature data and the other measured values for consistency. This approach illustrates that determinations of surface temperatures of the powder beds are difficult. KW - Rapid prototypes KW - Printers KW - Heat transfer KW - Powders KW - Ceramics KW - Metals PY - 2010 U6 - https://doi.org/10.1108/13552541011065722 SN - 1355-2546 VL - 16 IS - 5 SP - 328 EP - 336 PB - MCB University Press CY - Bradford AN - OPUS4-22002 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Arndt, Ralf T1 - Zerstörungsfreie Prüfung von Beton und Mauerwerk mit aktiver Thermografie - Einfluss von Oberflächen- und Volumeneigenschaften N2 - Ziel der hier vorgestellten Untersuchungen war es, die Einflüsse von variierenden thermischen Eigenschaften des Baustoffs sowie von unterschiedlichen Emissivitäten der Oberfläche auf die Ortung von Inhomogenitäten in Bauwerksstrukturen mit der aktiven Thermografie zu quantifizieren bzw. durch geeignete Auswerteverfahren zu reduzieren. Vorgestellt werden Ergebnisse von Untersuchungen an Betonprobekörpern mit unterschiedlichen Betonrezepturen und Oberflächenbeschichtungen und -modifikationen sowie an einem historischen Mauerwerksprobekörper mit aufsteigender Feuchte. Die Auswertung der Thermografiesequenzen erfolgte sowohl im Zeit- als auch im Frequenzbereich. KW - Aktive thermografie KW - Beton KW - Mauerwerk KW - Emissivität KW - Oberflächeneigenschaften KW - Thermische Materialeigenschaften PY - 2009 SN - 0025-5300 VL - 51 IS - 9 SP - 587 EP - 592 PB - Hanser CY - München AN - OPUS4-19920 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Krankenhagen, Rainer T1 - Integration of active thermography into the assessment of cultural heritage buildings N2 - Applications of infrared thermography in civil engineering are not limited to the identification of heat losses in building envelopes. Active infrared thermography methods enable structural investigations of building elements with one-sided access up to a depth of about 10 cm. Masonry and especially historical masonry has a very heterogeneous structure containing several different materials (brick, stone, mortar, plaster, wood, metal, etc.) with various thermal properties. As many classes of damage originate from defects that are close to the surface, active thermography is in general very well suited to assessing different test problems in cultural heritage buildings. In this paper, the physical background, equipment, environmental influences and material properties are discussed. Several application results are presented. It is shown how active thermography can be integrated into a holistic approach for the assessment of historical structures. KW - Active thermography KW - Impulse KW - Lock-in KW - Historical structure KW - Thermal properties PY - 2010 U6 - https://doi.org/10.1080/09500341003703497 SN - 0950-0340 VL - 57 IS - 18 SP - 1790 EP - 1802 PB - Taylor & Francis CY - Abingdon AN - OPUS4-22608 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Schlichting, Joachim ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Active thermography for evaluation of reinforced concrete structures KW - Active thermography KW - Pulse-phase thermography KW - Emissivity KW - Reinforced concrete KW - Subsurface defects PY - 2010 SN - 978-1-84569-950-5 VL - 2 IS - Chapter 17 SP - 370 EP - 402 PB - Woodhead Publ. AN - OPUS4-22611 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Schiller, M. A1 - Mecke, R. A1 - Seidl, T. A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Kalisch, U. A1 - Meinhardt, J. A1 - Hennen, C. T1 - Fallbeispiele für die Anwendung der 3D-Messtechnik und der aktiven Thermografie in der Denkmalpflege T2 - 4. Konservierungswissenschaftliches Kolloquium - Zerstörungsfreie Oberflächenuntersuchungsmethoden - Stand der Technik, Grenzen und Ausblicke CY - Potsdam, Deutschland DA - 2010-10-29 KW - Historisches Mauerwerk KW - Aktive Thermografie KW - 3D-Laserscanner KW - Datenfusion KW - Monitoring PY - 2010 SN - 978-3-88462-305-3 IS - Kap. 3 SP - 26 EP - 31 PB - Wernersche Verlagsgesellschaft AN - OPUS4-22636 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Kalisch, U. T1 - Qualifizierung und Vergleich zerstörungsfreier Prüfverfahren an historischem Mauerwerk: Messungen an Probekörpern und Fallstudien T2 - 4. Konservierungswissenschaftliches Kolloquium - Zerstörungsfreie Oberflächenuntersuchungsmethoden - Stand der Technik, Grenzen und Ausblicke CY - Potsdam, Deutschland DA - 2010-10-29 KW - Historisches Mauerwerk KW - Aktive Thermografie KW - Radar KW - Validierung PY - 2010 SN - 978-3-88462-305-3 IS - Kap. 1 SP - 9 EP - 15 PB - Wernersche Verlagsgesellschaft AN - OPUS4-22637 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias T1 - Aktive Thermografie zur zerstörungsfreien Prüfung von historischem Mauerwerk N2 - Mit aktiver Thermografie können in Mauerwerksstrukturen sowohl die Oberflächeneigenschaften als auch Inhomogenitäten bis in eine Tiefe von mehreren Zentimetern zerstörungsfrei untersucht werden. Neben der Charakterisierung struktureller Eigenschaften wie Risse, Ablösungen und Aufbau des Mauerwerks sind auch Aussagen zu den thermischen Materialeigenschaften und der Feuchte möglich. In diesem Beitrag werden das Prinzip des Messverfahrens, Laboruntersuchungen und eine Fallstudie vorgestellt. KW - Aktive Thermografie KW - Historisches Mauerwerk KW - Feuchte KW - Thermische Diffusivität KW - Anregungsquellen PY - 2011 SN - 978-3-86780-216-1 VL - 10 SP - 179 EP - 185 AN - OPUS4-23989 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weiser, M. A1 - Röllig, Mathias A1 - Arndt, Ralf A1 - Erdmann, B. T1 - Development and test of a numerical model for pulse thermography in civil engineering N2 - Pulse thermography of concrete structures is used in civil engineering for detecting voids, honeycombing and delamination. Quantitatively realistic numerical 3D simulation is difficult due to the arising boundary layer at the heated surface and unreliable information about material parameters and environmental conditions. We address both issues by a semi-analytic reformulation of the heat transport problem and by parameter identification. Numerical results are compared with measurements of a test specimen. PY - 2010 U6 - https://doi.org/10.1007/s00231-010-0656-9 SN - 0947-7411 VL - 46 IS - 11-12 SP - 1419 EP - 1428 PB - Springer CY - Berlin AN - OPUS4-23973 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Arndt, Ralf A1 - Kreutzbruck, Marc ED - Thompson, D. O. ED - Chimenti, D. E. T1 - Influence of surface properties on the detection and quantification of voids in concrete structures using active thermography N2 - Impulse thermography is an active method for quantitative investigations of the near surface region of various structures. It has recently been applied and optimized to applications in civil engineering. For quantitative analysis of data recorded on the building site, the problems are manifold. Here, the influence of the different surface properties on the detection and characterization of voids and honeycombing simulated by polystyrene cubes and cubes prepared of porous concrete are demonstrated. T2 - 35th Annual Review of Progress in Quantitative Nondestructive Evaluation CY - Chicago, IL, USA DA - 2008-07-20 KW - Active thermography KW - Pulse phase thermography KW - Surface properties KW - Emissivity KW - Concrete KW - Voids KW - Honeycombing PY - 2009 SN - 978-0-7354-0629-2 SN - 0743-0760 SN - 0094-243X N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings IS - 1096 SP - 1505 EP - 1511 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-19438 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Schlichting, Joachim A1 - Schiller, M. A1 - Seidl, T. A1 - Mecke, R. A1 - Kalisch, U. A1 - Hennen, C. A1 - Meinhardt, J. T1 - Investigating historic masonry structures with a combination of active thermography and 3D laser scanner N2 - Methods for the combination (i. e. comparison and overlay) and data fusion (i. e. integration of all data in one data set, replacement of data) of active thermography and D laser scanner (light section method) have been developed. Systematic investigations for quantification of damage in historic structures are presented using both techniques. A case study shows that reproducible investigations at regular time intervals are very well suited for structural monitoring. KW - Active thermography KW - 3D laser scanner KW - Data fusion KW - Historic masonry KW - Monitoring PY - 2011 SN - 1768-6733 VL - 8 IS - 1 SP - 115 EP - 118 PB - Lavoisier CY - Cachan Cedex AN - OPUS4-24300 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Krankenhagen, Rainer A1 - Myrach, Philipp T1 - Comparison of quantitative defect characterization using pulse-phase and lock-in thermography N2 - Using optical excitation sources for active thermography enables a contactless, remote, and non-destructive testing of materials and structures. Currently, two kinds of temporal excitation techniques have been established: pulse or flash excitation, usingmostly flash lamps; and periodic or lock-in excitation, using halogen lamps, LED, or laser arrays. From the experimental point of view, both techniques have their advantages and disadvantages. Concerning the comparison of the testing results of both techniques, only very few studies have been performed in the past. In this contribution, the phase values obtained at flat bottom holes in steel and CFRP and the spatial resolution measured at crossed notches in steel using flash and lock-in excitation are compared quantitatively. KW - Nondestructive testing KW - Thermal imaging KW - Infrared imaging KW - Phase measurement KW - Metals KW - Polymers PY - 2016 UR - https://www.osapublishing.org/ao/viewmedia.cfm?URI=ao-55-34-D76&seq=0&origin=search U6 - https://doi.org/10.1364/AO.55.000D76 SN - 1559-128X SN - 0003-6935 SN - 1539-4522 VL - 55 IS - 34 SP - D76 EP - D86 PB - OSA Publishing CY - Washington, D.C. 20036-1012 USA AN - OPUS4-38184 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Richter, U. A1 - Mischke, R. A1 - Röllig, Mathias A1 - Maierhofer, Christiane A1 - Eigenfeld, K. T1 - Porosity detection in high pressure die castings - Part 2 - Non-destructive characterization of pores in HPD castings using active thermpography: numerical simulation and experimental validation N2 - Ever larger high pressure die castings (HPDC) with ever thinner walls raise the issue of casting defects. Properties of components are often strongly influenced by inner porosity. In the case of high pressure die castings, shrinkage and gas porosity occur. Two possibilities of characterizing porosity - by microscopy and acitve thermography - are dealt with in two articles. In the previous article, the microscopic investigations are presented. In this article, first the feasibility of thermographic detection will be discussed based on simulations and, thereafter, the experimental determination of porosity with active thermography will be described. KW - Porosity KW - Aluminium KW - HPD casting KW - Active thermography KW - Flash KW - Numerical simulation PY - 2015 SN - 0046-5933 VL - 67 IS - 2 SP - 38 EP - 47 PB - Gießerei-Verl. CY - Düsseldorf AN - OPUS4-34283 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rothbart, Nick A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Sengebusch, M. A1 - Goldammer, M. A1 - Hohlstein, F. A1 - Koch, J. A1 - Kryukov, I. A1 - Mahler, G. A1 - Stotter, B. A1 - Walle, G. T1 - Ringversuche zur Blitzthermografie N2 - Im Rahmen des INS-Projekts „Durchführung von Ringversuchen zur Normung und Standardisierung der aktiven Thermografie mit Blitzlichtanregung“ wurden Ringversuche durchgeführt, die die Zuverlässigkeit, Vergleichbarkeit und Effektivität der Blitzthermografie für unterschiedliche Prüfprobleme nachweisen sollten. Weiterhin sollten diese Untersuchungen als Methodenvalidierungsstudie die Richtigkeit und Präzision der Blitzthermografie nachweisen und Vergleichsinformationen unterschiedlicher Geräteausstattungen liefern. Im Normausschuss NA 062-08-27 AA „Visuelle und thermografische Prüfung“ des DIN werden die Ergebnisse die Erarbeitung eines Normentwurfs zur Blitzthermografie unterstützen. In diesem Beitrag werden die Ringversuche beschrieben und ausgewählte Ergebnisse präsentiert. T2 - Thermographie-Kolloquium 2015 CY - Leinfelden-Echterdingen, Germany DA - 01.10.2015 KW - Thermografie mit Blitzanregung KW - Ringversuch KW - Testkörper KW - Standardisierung KW - Signal-zu-Rausch-Verhältnis PY - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-345460 SN - 978-3-940283-74-0 IS - DGZfP BB 154 SP - Vortrag 12, 1 EP - 8 AN - OPUS4-34546 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Ehrig, Karsten A1 - Meinel, Dietmar T1 - Validierung der aktiven Thermografie mittels CT zur Charakterisierung von Inhomogenitäten und Fehlstellen in CFK N2 - Aktive Thermografieverfahren werden immer häufiger zur zerstörungsfreien Prüfung von Faserverbundwerkstoffen eingesetzt, da diese völlig berührungslos arbeiten und sowohl zur Prüfung großflächiger Strukturen als auch von großen Stückzahlen kleinerer Komponenten in der Fertigung eingesetzt werden können. Dieser Beitrag beschäftigt sich mit Untersuchungen an typischen Defekten und Inhomogenitäten, die bereits während der Fertigung von CFK Bauteilen entstehen oder unbeabsichtigt mit eingebaut werden. Systematische Untersuchungen wurden mit Blitzthermografie in Reflexions- und Transmissionskonfiguration und mit Computertomographie (CT) durchgeführt. Die CT wurde dabei als Referenzverfahren genutzt, da dieses Verfahren auch kleinere Defekte mit relativ hoher Ortsauflösung und unabhängig von der Tiefe darstellen kann. T2 - DACH-Jahrestagung 2015 CY - Salzburg, Austria DA - 11.05.2015 KW - Aktive Thermografie KW - Computer Tomographie KW - Aluminium Druckguss KW - Poren KW - Validierung PY - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-345251 SN - 978-3-940283-68-9 IS - DGZfP BB 152 SP - Mi.3.C.1, 1 EP - 8 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) AN - OPUS4-34525 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Steinfurth, Henrik A1 - Mecke, R. A1 - Schiller, M. A1 - Kernchen, A. A1 - Kalisch, U. A1 - Meinhardt, J. A1 - Hennen, C. A1 - Arnold, T. A1 - Groll, T. T1 - Erfassung und Bewertung von sicherheitsrelevanten Ablösungsprozessen bei Putzen und Fassadenelementen mit zerstörungsfreien Mess- und Prüfverfahren N2 - Im Beitrag werden Verfahren und Strategien basierend auf optischen und thermografischen Methoden zur Lokalisierung, Erfassung und Bewertung von Putzablösungen und Ablösungen von Fassadenelementen vorgestellt. Abgelöste Fassadenbereiche zeigen dabei sowohl geometrische als auch thermische Auffälligkeiten, die im Rahmen eines Monitoring auch über größere Zeiträume verfolgt werden können. Als optische Verfahren werden die Stereophotogrammetrie und die trackingbasierte taktile 3D-Erfassung von Oberflächenmerkmalen eingesetzt. Zur Charakterisierung verdeckter Ablösungen und Bauteile wird die aktive Thermografie mit natürlicher und künstlicher Erwärmung der Bauteiloberfläche verwendet. Systematische Untersuchungen an Probekörpern und Fallstudien (Magdeburger Dom, Wandbild in Cobbelsdorf) zeigen, wie u. a. mit der Verfahrenskombination Ablösungen und Materialinhomogenitäten unterschieden werden können. T2 - DACH-Jahrestagung 2015 CY - Salzburg, Austria DA - 11.05.2015 KW - Aktive Thermografie KW - Photogrammetrie KW - Risstracking KW - Bauwerksfassaden KW - Ablösungen PY - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-345268 SN - 978-3-940283-68-9 IS - DGZfP BB 152 SP - Mi.1.B.2, 1 EP - 8 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) AN - OPUS4-34526 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Steinfurth, Henrik A1 - Meinhardt, J. A1 - Arnold, T. T1 - Untersuchung sicherheitsrelevanter Ablösungen von Fassadenelementen mit aktiver Thermografie N2 - Die Bewertung des Zustandes und der Haftung von Putz und Fassadenelementen auf den darunterliegenden Bauwerksstrukturen ist eine häufig auftretende Fragestellung bei der Erhaltung und Instandsetzung von Bauwerken und Baudenkmälern. Hier müssen nicht nur wirtschaftliche und denkmalpflegerische, sondern auch sicherheitsrelevante Aspekte berücksichtigt werden. Fehlstellen und Ablösungen können, auch wiederholend, mit hoher Nachweisempfindlichkeit mit aktiven Thermografieverfahren geortet und unter bestimmten Voraussetzungen quantitativ bewertet werden. Dazu wird der zu untersuchende Bereich zunächst kurzzeitig (mehrere Minuten lang) erwärmt und anschließend die Abkühlung mit einer Infrarotkamera aufgezeichnet. Systematische Untersuchungen an Probekörpern mit einer Vielzahl unterschiedlicher Fehlstellen unterhalb von Kalkputz, Fliesen und Klinkerriemchen zeigen, dass die Fehlstellen sowohl mittels künstlicher Erwärmung durch einen Infrarotstrahler als auch mittels natürlicher Erwärmung durch die Sonne detektiert und charakterisiert werden können. --------------------------------------------------------------------------------------------------------------------------------------- The evaluation of condition and adhesion of plaster and façade elements to the underlying building structure is a common issue in the maintenance and repair of buildings and monuments. Here not only economic and preservation, but also safety relevant aspects have to be considered. Voids and delaminations can be detected repeatedly with high sensitivity using active thermography methods. Under certain conditions, also a quantitative evaluation is possible. The area under investigation has to be heated up for a short time (up to several minutes). Subsequently, the cooling down is recorded using an infrared camera. Systematic studies on test specimens with a variety of defects below lime plaster, tiles and brick tiles show that the defects can be detected and even characterized both by means of artificial heating using an infrared heater, as well as by natural solar heating. KW - Zerstörungsfreie Prüfung KW - Aktive Thermografie KW - Sonnenerwärmung KW - Fassade KW - Putz KW - Klinkerriemchen KW - Fliese KW - Fehlstelle KW - Ablösung KW - Non-destructive testing KW - Active thermography KW - Heating using solar radiation KW - Facade KW - Plaster KW - Brick tile KW - Tile KW - Void KW - Delamination KW - Bauwerkserhaltung/Sanierung KW - Maintenance and Repair KW - Neue Verfahren/Versuchstechnik KW - New Processes/Experimental Techniques KW - Qualitätssicherung KW - Quality assurement PY - 2015 U6 - https://doi.org/10.1002/bate.201500050 SN - 0932-8351 SN - 1437-0999 SN - 0005-6820 SN - 0341-1052 SN - 0932-6359 VL - 92 IS - 10 SP - 1 EP - 6 PB - Ernst & Sohn CY - Berlin AN - OPUS4-34527 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Richter, U. A1 - Mischke, R. A1 - Röllig, Mathias A1 - Maierhofer, Christiane A1 - Eigenfeld, K. A1 - Arendholz, S. T1 - Porosity detection in high pressure die castings - Part 1 - Microscopic investigations of pores in HPD castings N2 - Ever larger high pressure die castings (HPDC) with ever thinner walls raise the issue of castings defects. Properties of components are often strongly influenced by inner porosity. In the case of high pressure die castings, shrinkage and gas porosity occur. Two possibilities of characterizing porosity – by microscopy and active thermography – are dealt with in two articles. In this article, the microscopic investigations are presented. In a second article, first the feasibility of thermographic detection will be discussed based on simulations and, thereafter, the experimental determination of porosity with active thermography will be described. KW - Die casting KW - Aluminium KW - Pores KW - Microscopy KW - Active thermography KW - NDT PY - 2015 SN - 0046-5933 IS - 1 SP - Beitrag 03, 1 EP - 10 PB - Gießerei-Verl. CY - Düsseldorf AN - OPUS4-33111 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Myrach, Philipp A1 - Röllig, Mathias A1 - Mecke, R. A1 - Schiller, M. A1 - Seidl, T. A1 - Kalisch, U. A1 - Hennen, C. A1 - Meinhardt, J. A1 - Kersten, H. A1 - Groll, E.T. T1 - 3D-Kartierung von oberflächennahen Schäden an Bauwerken und Bauteilen N2 - Die messtechnische Erfassung von Bauwerkschäden ist eine wichtige Voraussetzung für die dreidimensionale und zeitaufgelöste Darstellung von möglicherweise sicherheitsrelevanten Veränderungen an Bauwerken, wie z. B. Verformungen, Verwindungen und Risswachstum. Ziel des vorgestellten Projektes war die Entwicklung eines Verfahrens zur effizienten und wiederholbaren 3D-Schadenkartierung an zum Teil empfindlichen Bauteiloberflächen. KW - 3D-Kartierung KW - Aktive Thermografie KW - Photogrammetrie KW - Trackingsystem KW - Risse PY - 2015 IS - März SP - 35 EP - 39 PB - Ernst & Sohn CY - Berlin AN - OPUS4-33084 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krankenhagen, Rainer A1 - Worzewski, Tamara A1 - Doroshtnasir, Manoucher A1 - Röllig, Mathias A1 - Studemund, Taarna T1 - Inspecting defective rotor blades by thermographic monitoring from greater distances: A review on results of the three-year project IKARUS T2 - DEWEK 2015 - 12th German Wind Energy Conference CY - Bremen, Germany DA - 2015-05-19 KW - Wind turbine KW - Thermography KW - Rotor blade PY - 2015 SP - Session No. 20, 1 EP - 4(?) AN - OPUS4-34348 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Steinfurth, Henrik A1 - Krankenhagen, Rainer A1 - Mecke, R. A1 - Schiller, M. A1 - Kernchen, A. A1 - Kalisch, U. A1 - Hennen, C. A1 - Meinhardt, J. A1 - Groll, E.T. A1 - Arnold, T. T1 - Detection and characterisation of safety relevant detachments of facade elements using a combination of active thermography and optical scanning methods N2 - In this contribution, the development and application of optical and thermographic methods for the nondestructive evaluation of delaminations, cracks and further substructures in Connection with bulging is presented. Since delaminated fagade elements show geometric as well as thermal anomalies, surface geometry and defects beneath the surface were investigated. As methods, Stereo photogrammetry, a tracking based method for tactile recording of geometric 3D data and active thermography were used. Two case studies were assessed with a combination of these methods: the plaster scratches at the Magdeburg Cathedral and a mural painting in Cobbelsdorf, both located in Germany. While the plaster scratches have been investigated by artificial heating with an infrared radiator, the rural painting was tested by analysing the temperature increase due to solar heating. T2 - NDT-CE 2015 - International symposium non-destructive testing in civil engineering CY - Berlin, Germany DA - 15.09.2015 KW - Active thermography KW - Stereo photogrammetry KW - Tracking sensor KW - Historic plaster KW - Masonry KW - Delaminations KW - Cracks PY - 2015 SN - 1435-4934 SP - 291 EP - 300 AN - OPUS4-35106 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Röllig, Mathias A1 - Steinfurth, Henrik A1 - Ziegler, Mathias T1 - Untersuchung von Hochleistungsleuchtdioden für den Einsatz in der zerstörungsfreien Prüfung mittels Thermografie T2 - Thermografie-Kolloquium 2013 CY - Parkhotel Stuttgart Messe- Airport, Leinfelden-Echterdingen DA - 2013-09-26 PY - 2013 AN - OPUS4-32806 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krankenhagen, Rainer A1 - Worzewski, Tamara A1 - Doroshtnasir, Manoucher A1 - Röllig, Mathias A1 - Studemund, Taarna T1 - Inspecting rotor blades by thermographic monitoring from greater distances N2 - The paper presents some of the results obtained within a project concerning the validation of the thermographic inspection method applied to rotor blades of wind turbines. Thermographic testing (TT) is a well established nondestructive testing method under laboratory conditions. It is suited to detect typical structural features and also faults and damages within the blade structure. However, the onsite application for wind turbines during Operation is not straightforward. Some resuits of non-rotating blades as well as of rotating blades are presented. The simultaneous recording of all blades in the rotating state allows the application of a reference method suppressing disturbing influences and leading to enhanced thermal contrasts. T2 - DEWEK 2015 CY - Bremen, Deutschland DA - 19.05.2015 PY - 2015 AN - OPUS4-33272 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Worzewski, Tamara A1 - Röllig, Mathias A1 - Maierhofer, Christiane A1 - Doroshtnasir, M. A1 - Steinfurth, H. A1 - Krankenhagen, Rainer T1 - Thermographic inspection of a wind turbine rotor blade segment utilizing natural conditions as excitation source, Part I: Solar excitation for detecting deep structures in GFRP N2 - This study evaluates whether subsurface features in rotor blades, mainly made of Glass Fibre Reinforced Plastics (GFRP), can generally be detected with ‘‘solar thermography”. First, the suitability of the sun is tested for acting as a heat source for applying active thermography on a 30 mm thick GFRP test specimen. Second, a defective rotor blade segment is inspected outdoors under ideal natural conditions using the sun as excitation source. Additionally, numerical FEM-simulations are performed and the comparability between experiment and simulation is evaluated for outdoor measurements. KW - NDT KW - Numerical simulation KW - Solar excitation KW - On-site inspection KW - Structural health monitoring PY - 2016 U6 - https://doi.org/10.1016/j.infrared.2016.04.011 SN - 1350-4495 VL - 76 SP - 756 EP - 766 PB - Elsevier B.V. AN - OPUS4-36076 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Worzewski, Tamara A1 - Doroshtnasir, Manoucher T1 - Thermographic rotor blade inspection from larger distances – a promising tool for the maintenance of wind turbines N2 - The permanently increasing number of wind turbines requires suited inspection and monitoring methods to ensure liability and security. Concerning the inspection of ro-tor blades, only manual inspections are state of the art. Thermographic Testing (TT) has the potential to detect typical failures and damages on rotor blades. The paper presents some results of onsite measurements carried out as “passive thermogra-phy”, i.e. without a defined heating procedure. Due the totally contactless meas-urement principle, TT can be applied to rotating blades as well as to resting blades. Both methods will be compared with respect to their possible realization. T2 - WCNDT 2016 CY - Munich, Germany DA - 13.06.2016 KW - Wind turbine rotor blade KW - Thermographic inspection KW - Passive thermography KW - Nondestructive testing PY - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-366331 SN - 978-3-940283-78-8 SP - We.4.D.4., 1 EP - 8 AN - OPUS4-36633 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Steinfurth, Henrik A1 - Krankenhagen, Rainer A1 - Myrach, Philipp A1 - Mecke, R. A1 - Schiller, M. A1 - Seidl, T. A1 - Kernchen, A. A1 - Kalisch, U. A1 - Meinhardt, J. A1 - Hennen, C. A1 - Arnold, T. A1 - Groll, T. T1 - 3D-Kartierung von Bauwerksoberflächen mit optischen und thermografischen Verfahren N2 - In diesem Beitrag werden Verfahren und Strategien basierend auf optischen und thermografischen Methoden zur Lokalisierung, Erfassung und Bewertung von Putzablösungen, Ablösungen von Fassadenelementen und Rissen vorgestellt. Abgelöste Fassadenbereiche und Risse zeigen dabei sowohl geometrische als auch thermische Auffälligkeiten, die im Rahmen eines Monitoring auch über größere Zeiträume verfolgt werden können. Als optische Verfahren werden die trackingbasierte taktile 3D‐Erfassung von Oberflächenmerkmalen und die Stereophotogrammetrie eingesetzt. Zur Charakterisierung verdeckter Ablösungen und Bauteile wird die aktive Thermografie mit natürlicher und künstlicher Erwärmung der Bauteiloberfläche verwendet. Systematische Untersuchungen an Probekörpern und Fallstudien (Magdeburger Dom, Wandbild in Cobbelsdorf, Giebichensteinbrücke) zeigen, wie u. a. mit der Verfahrenskombination die Schäden charakterisiert werden können. T2 - Interdisziplinäre Forschung in der Denkmalpflege - 20 Jahre IDK - CY - Dresden, Germany DA - 31.05.2016 KW - Monitoring KW - Risse KW - Ablösungen KW - Aktive Thermografie KW - Optische 3D-Erfassung PY - 2016 SN - 978‐3‐9811706‐2‐7 SP - 141 EP - 156 CY - Dresden AN - OPUS4-37508 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Heckel, Thomas A1 - Brackrock, Daniel A1 - Gaal, Mate T1 - Quantification of impact damages in CFRP and GFRP structures with thermography and ultrasonics N2 - The extent of damage caused by impacts in fibre reinforced composites depends on the energy of the impacts, on the velocity and the shape of the impacting body, on the material and structure of the composite and on the geometry of the structure. Here, mainly the thickness of the component is essential. The non-destructive evaluation of these damages can be carried out using both ultrasound and active thermography methods. A comparison of the detection sensitivity of these methods for the different damages is carried out in this paper depending on the fibre composite material used (CFRP and GFRP), the thickness of the material and the impact energy. The NDT methods used after the damage are supplemented by thermographic measurements with high temporal resolution, which were already recorded during the impact. T2 - 14th Quantitative InfraRed Thermography Conference CY - Berlin, Germany DA - 25.06.2018 KW - Active thermography KW - Passive thermography KW - Ultrasonics KW - CFRP KW - GFRP KW - Impact PY - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-454952 UR - http://www.qirt.org/archives/qirt2018/papers/126.pdf SP - 933 EP - 940 PB - DGZfP e. V. AN - OPUS4-45495 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kulla, Hannes A1 - Haferkamp, Sebastian A1 - Akhmetova, Irina A1 - Röllig, Mathias A1 - Maierhofer, Christiane A1 - Rademann, Klaus A1 - Emmerling, Franziska T1 - In situ investigations of mechanochemical one-pot syntheses N2 - We present an in situ triple coupling of synchrotron X-ray diffraction with Raman spectroscopy, and thermography to study milling reactions in real time. This combination of methods allows a correlation of the structural evolution with temperature information. The temperature information is crucial for understanding both the thermodynamics and reaction kinetics. The reaction mechanisms of three prototypical mechanochemical syntheses, a cocrystal formation, a C@C bond formation (Knoevenagel condensation), and the formation of a manganese-phosphonate, were elucidated. Trends in the temperature development during milling are identified. The heat of reaction and latent heat of crystallization of the product contribute to the overall temperature increase. A decrease in temperature occurs via release of, for example, water as a byproduct. Solid and liquid intermediates are detected. The influence of the mechanical impact could be separated from temperature effects caused by the reaction. KW - In situ studies KW - Mechanochemistry KW - Raman spectroscopy KW - Thermography KW - X-ray diffraction PY - 2018 U6 - https://doi.org/10.1002/anie.201800147 SN - 1433-7851 SN - 1521-3773 VL - 57 IS - 20 SP - 5930 EP - 5933 PB - Wiley-VCH CY - Weinheim AN - OPUS4-44946 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Gower, M. A1 - Lodeiro, M. A1 - Baker, G. A1 - Monte, C. A1 - Adibekyan, A. A1 - Gutschwager, B. A1 - Knazowicka, L. A1 - Blahut, A. T1 - Evaluation of different techniques of active thermography for quantification of artificial defects in fiber-reinforced composites using thermal and phase contrast data analysis N2 - For assuring the safety and reliability of components and constructions in energy applications made of fiber-reinforced polymers (e.g., blades of wind turbines and tidal power plants, engine chassis, flexible oil and gas pipelines) innovative non-destructive testing methods are required. Within the European Project VITCEA complementary methods (shearography, microwave, ultrasonics and thermography) have been further developed and validated. Together with partners from the industry, test specimens have been constructed and selected on-site containing different artificial and natural defect artefacts. As base materials, carbon and glass fibers in different orientations and layering embedded in different matrix materials (epoxy, polyamide) have been considered. In this contribution, the validation of flash and lock-in thermography to these testing problems is presented. Data analysis is based on thermal contrasts and phase evaluation techniques. Experimental data are compared to analytical and numerical models. Among others, the influence of two different types of artificial defects (flat bottom holes and delaminations) with varying diameters and depths and of two different materials (CFRP and GFRP) with unidirectional and quasi-isotropic fiber alignment is discussed. KW - Active thermography KW - CFRP KW - GFRP KW - Delaminations KW - Flash excitation KW - Lock-in excitation PY - 2018 U6 - https://doi.org/10.1007/s10765-018-2378-z SN - 0195-928X SN - 1572-9567 VL - 39 IS - 5 SP - Article 61, 1 EP - 37 PB - Springer AN - OPUS4-44687 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krankenhagen, Rainer A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Heckel, Thomas A1 - Brackrock, Daniel A1 - Gaal, Mate T1 - Charakterisierung von Impactschäden während und nach der Belastung mit thermografischen Verfahren und mit Ultraschall N2 - Der Umfang der durch Impacts in Faserverbundmaterialien erzeugten Schäden ist abhängig von der Energie des Impacts, von der Zusammensetzung und dem Aufbau der Faserverbundwerkstoffe und von der Geometrie der Bauteile und hier im Wesentlichen von der Dicke des Bauteils. Der zerstörungsfreie Nachweis dieser Schädigungen kann sowohl mit Ultraschallverfahren als auch mit Verfahren der aktiven Thermografie erfolgen. Ein Vergleich der Nachweisempfindlichkeiten dieser Verfahren für die unterschiedlichen Schädigungen wird in diesem Beitrag in Abhängigkeit vom verwendeten Faserverbundwerkstoff (CFK und GFK), der Dicke des Materials und von der Impactenergie durchgeführt. Ergänzt werden die im Anschluss an die Schädigung eingesetzten ZfP-Verfahren mit zeitlich hochaufgelösten Thermografiemessungen, die bereits während des Impacts aufgenommen wurden. T2 - DGZfP Jahrestagung 2018 CY - Leipzig, Germany DA - 07.05.2018 KW - Thermografie KW - Ultraschall KW - Faserverbundwerkstoffe KW - Impactschäden PY - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-448773 SN - 978-3-940283-92-4 VL - 166 SP - 1 EP - 8 PB - Deutsche Gesellschaft für zerstörungsfreie Prüfung (DGZfP) CY - Berlin AN - OPUS4-44877 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Myrach, Philipp A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Steinfurth, Henrik T1 - Detection and characterization of defects in isotropic and anisotropic structures using lockin thermography N2 - Lockin thermography is a well-suited method for the characterization of structures made of both metal and fiber reinforced plastic. In most cases, only phase images are analyzed, although the amplitude images might contain useful information as well. Thus, systematic studies of lockin thermography are presented, assessing amplitude and phase images for the detection and quantification of defects in isotropic (steel) and anisotropic (carbon fiber reinforced plastic) materials. Characterized defects are flat bottom holes with different diameters and various remaining wall thicknesses as well as crossed notches at different depths. The excitation frequency was varied while keeping the number of analyzed excitation periods nearly constant for each material. The data analysis was focused on the detectability of the defects both in the amplitude and phase images, including the determination of the signal-to-noise ratio and of the spatial resolution. As a result, the limits of defect detectability and spatial resolution are given for each material KW - Lockin-Thermography KW - Non-destructive testing KW - Steel KW - Carbon-fiber-reinforced plastics KW - Amplitude images KW - Phase images KW - Signal-to-noise ratio KW - Lateral resolution PY - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-352394 SN - 2313-433X VL - 1 SP - 220 EP - 248 PB - MDPI CY - Basel AN - OPUS4-35239 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Myrach, Philipp A1 - Röllig, Mathias A1 - Jonietz, Florian A1 - Illerhaus, Bernhard A1 - Meinel, Dietmar A1 - Richter, U. A1 - Miksche, R. ED - Chimenti, Dale E. ED - Bond, Leonard J. T1 - Characterization of pores in high pressure die cast aluminum using active thermography and computed tomography N2 - Larger high pressure die castings (HPDC) and decreasing wall thicknesses are raising the issue of casting defects like pores in aluminum structures. Properties of components are often strongly influenced by inner porosity. As these products are being established more and more in lightweight construction (e.g. automotive and other transport areas), non-destructive testing methods, which can be applied fast and on-site, are required for quality assurance. In this contribution, the application of active thermography for the direct detection of larger pores is demonstrated. The analysis of limits and accuracy of the method are completed by numerical simulation and the method is validated using computed tomography. T2 - 42nd Annual Review of Progress in Quantitative Nondestructive Evaluation CY - Minneapolis, Minnesota, USA DA - 26.07.2015 KW - flash thermography KW - aluminum KW - pores KW - computed tomography PY - 2016 SN - 978-0-7354-1353-5 U6 - https://doi.org/10.1063/1.4940580 VL - 1706 SP - 110009-1 EP - 110009-8 PB - AIP Publishing LLC CY - Melville, New York, USA AN - OPUS4-35848 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Myrach, Philipp A1 - Steinfurth, Henrik A1 - Reischel, Mercedes A1 - Röllig, Mathias T1 - Development of standards for flash thermography and lock-in thermography N2 - Standards for the application of flash thermography as well as of lock-in thermography are urgently required. Both methods are applied more and more often in research and industry, but still extensive validation procedures are required for each individual application. In this paper, the results of two research projects concerning the validation and standardisation of both methods are presented. This includes results of a detailed study of the influence of measurements parameters on flash thermography, of the comparison of the lateral resolution obtained with flash and lock-in thermography and the description of a draft standard for flash thermography. T2 - QIRT 2014 - 12th International conference on quantitative infrared thermography CY - Bordeaux, France DA - 07.07.2014 KW - Active thermography KW - Flash KW - Lockin KW - CFRP KW - Metal KW - Standardization PY - 2014 UR - http://qirt.gel.ulaval.ca/archives/qirt2014/QIRT%202014%20Papers/QIRT-2014-032.pdf U6 - https://doi.org/10.21611/qirt.2014.032 SP - 1 EP - 9 AN - OPUS4-31187 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias T1 - Application of thermographic testing for the characterization of impact damage during and after impact load N2 - Low-velocity impact damages were monitored in-situ using an infrared camera before, during and after Impact load. Thermal images were recorded as a function of time at the front side (impact) as well as at the rear side of the plates using a high frame rate. In CFRP and GFRP specimens with different thicknesses and made of various types of fibers and matrix materials, different kind of damages were observed. The sizes of the heated areas being related to the damages and the amount of energy dissipated into heat was determined quantitatively as a function of impact energy and are a measure of the resistance of the different materials against impact load. KW - Laminates KW - Impact behaviour KW - NDT KW - Thermal analysis PY - 2019 U6 - https://doi.org/10.1016/j.compositesb.2019.106899 SN - 1359-8368 SN - 1879-1069 VL - 173 SP - 106899, 1 EP - 17 PB - Elsevier AN - OPUS4-48881 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kulla, Hannes A1 - Wilke, Manuel A1 - Fischer, Franziska A1 - Röllig, Mathias A1 - Maierhofer, Christiane A1 - Emmerling, Franziska T1 - Warming up for mechanosynthesis – temperature development in ball mills during synthesis N2 - We present a first direct measurement of the temperature during milling combined with in situ Raman spectroscopy monitoring. The data reveal a low temperature increase due to the mechanical impact and clear temperature increases as a consequence of the reaction heat. Based on the data, temperature rises as postulated in the magma plasma and hot spot theory can be excluded for soft matter milling syntheses. KW - Thermography KW - Milling KW - Mechanochemistry KW - Soft matter PY - 2017 U6 - https://doi.org/10.1039/c6cc08950j SN - 1364-548X SN - 1359-7345 SN - 0009-241X VL - 53 IS - 10 SP - 1664 EP - 1667 AN - OPUS4-39251 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Unnikrishnakurup, Sreedhar A1 - Monte, C. A1 - Adibekyan, A. A1 - Gutschwager, B. A1 - Knazowicka, L. A1 - Blahut, A. A1 - Gower, M. A1 - Lodeiro, M. A1 - Baker, G. A1 - Aktas, A. T1 - Einfluss thermischer und optischer Materialeigenschaften auf die Charakterisierung von Fehlstellen in Faserverbundwerkstoffen mit aktiven Thermografieverfahren T1 - Influence of thermal and optical material properties on the characterization of defects in fiber reinforced composites with active thermography methods N2 - In diesem Beitrag werden zerstörungsfreie Untersuchungen mittels aktiver Thermografie an Probekörpern aus CFK und GFK mit unterschiedlichen künstlichen Fehlstellen vorgestellt. Dabei wird die zeitliche und örtliche Temperaturverteilung nach der Erwärmung mit Blitzlampen oder mit einem Infrarot-Strahler mit einer Infrarot-Kamera erfasst. Zur späteren Rekonstruktion der Messdaten wurde ein numerisches Modell entwickelt. Dazu war die Bestimmung der thermophysikalischen und optischen Materialeigenschaften erforderlich, was in diesem Beitrag ebenfalls beschrieben wird. Die Ergebnisse der numerischen Modellierung werden mit den experimentellen Untersuchungen der aktiven Thermografie verglichen. Weiterhin werden die experimentellen Untersuchungen hinsichtlich der beiden Materialsysteme CFK und GFK und unter Berücksichtigung der Teiltransparenz des GFK-Materials sowie der unterschiedlichen Anregungsquellen bewertet. N2 - This paper presents results of the non-destructive evaluation of CFRP and GFRP test specimens with various artificial defects using active thermography. After heating the specimens with flash lamps or with an infrared radiator, the temporal and spatial resolved temperature distribution is recorded with an infrared camera. For the reconstruction of the experimental data, a numerical model was developed. For the numerical simulations, the thermal and optical material parameters had to be determined, which is described in this contribution as well. The results of numerical modelling are compared to experimental data of active thermography. Additionally, the experimental results are assessed related to the two materials CFRP and GFRP by considering the partial transmissivity of the GFRP material, and to the different excitation sources. T2 - Temperatur 2017 CY - Berlin, Germany DA - 17.05.2017 KW - Zerstörungsfreie Prüfung KW - Aktive Thermografie KW - Faserverbundwerkstoffe (CFK, GFK) KW - Numerische Simulation PY - 2017 U6 - https://doi.org/10.1515/teme-2017-0078 SN - 0171-8096 SN - 2196-7113 VL - 85 IS - 1 SP - 13 EP - 27 PB - DE GRUYTER CY - Oldenburg AN - OPUS4-42395 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Unnikrishnakurup, Sreedhar A1 - Monte, C. A1 - Adibekyan, A. A1 - Gutschwager, B. A1 - Knazowicka, L. A1 - Blahut, A. A1 - Gower, M. A1 - Lodeiro, M. A1 - Baker, G. A1 - Aktas, A. T1 - Einfluss thermischer und optischer Materialeigenschaften auf die Charakterisierung von Fehlstellen in Faserverbundwerkstoffen mit aktiven Thermografieverfahren N2 - In diesem Beitrag werden zerstörungsfreie Untersuchungen mittels aktiver Thermografie an Probekörpern aus CFK und GFK mit unterschiedlichen künstlichen Fehlstellen vorgestellt. Dabei wird die zeitliche und örtliche Temperaturverteilung nach Erwärmung mit Blitzlampen oder mit einem Infrarot-Strahler mit einer Infrarot-Kamera erfasst. Zur Rekonstruktion der Messdaten wurde ein numerisches Modell entwickelt. Dazu war die Bestimmung der thermischen und optischen Materialeigenschaften erforderlich. N2 - This paper presents results of the non-destructive evaluation of CFRP and GFRP test specimens with various artificial defects using active thermography. After heating the samples with flash lamps or with an infrared radiator, the temporal and spatial resolved temperature distribution is recorded with an infrared camera. For the reconstruction of the experimental data, a numerical model was developed. For the numerical simulations, the thermal and optical material parameters had to be determined. T2 - Temperatur 2017 CY - Berlin, Germany DA - 17.05.2017 KW - CFK KW - GFK KW - aktive Thermografie KW - numerische Simulation KW - Emissivität PY - 2017 SN - 978-3-944659-04-6 SP - 15 EP - 20 AN - OPUS4-41088 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Hosseini, Seyed A1 - Heckel, Thomas A1 - Gaal, Mate A1 - Schadow, Florian A1 - Brackrock, Daniel A1 - Gower, M. A1 - Lodeiro, M. A1 - Baker, G. T1 - Quantitative Bewertung künstlicher und natürlicher Fehler in Faserverbundwerkstoffen mit aktiver Thermografie und Ultraschall N2 - Im EMRP-Projekt VITCEA werden komplementäre ZFP-Verfahren zur Prüfung von Faserverbundwerkstoffen weiterentwickelt und validiert. In diesem Beitrag werden Ergebnisse verschiedener Techniken der aktiven Thermografie und des Ultraschalls vorgestellt. Die Nachweisempfindlichkeiten bezüglich künstlicher und natürlicher Fehler mit unterschiedlichen lateralen Ausdehnungen und in verschiedenen Tiefen werden miteinander verglichen. T2 - DGZfP Jahrestagung 2017 CY - Koblenz, Germany DA - 22.05.2017 KW - CFK KW - GFK KW - Aktive Thermografie KW - Phased Array Ultraschall KW - Luftultraschall PY - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-410902 SN - 978-3-940283-85-6 VL - BB 162 SP - Di1B1, 1 EP - Di1B1, 8 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung e. V. AN - OPUS4-41090 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ziegler, Mathias A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias T1 - Characterization of defects in fibre reinforced composites (FRC) using passive and active thermography N2 - Impact damages and delaminations in fibre-reinforced composites (FRC) might not be visible at the surface, but could have an influence on the resistance and on the long-term behaviour of the component. Therefore, and especially for safety relevant structures, non-destructive methods are required for the assessment of such damages. Active thermography methods are suitable to characterize damages after loading using different kind of excitation techniques and various configurations of infrared (IR) camera and heating sources. Here, flash lamps, impulse excitation with infrared radiator and lock-in technique with halogen lamps or widened laser beams are suited. In addition, non-optical sources like sonotrodes (requiring direct contact to the structure) or induction generators (only suited for carbon fibre reinforced polymer (CFRP) structures) could be applied as well. For the investigation of the evolution of the damage during the impact, passive thermography can be applied in-situ. Elastic and plastic deformations alter the temperature of the structure and thus the temperature on the surface. In this contribution, at first the general principles of quantitative defect characterisation in FRC using active thermography with flash, impulse and lock-in excitation are described. Optical and thermal properties of the FRC material and its anisotropy are considered. Results of phase differences obtained at flat bottom holes with flash and lock-in thermography are compared for qualifying both methods for quantitative defect characterization. Secondly, the damage evolution of CFRP and GFRP structures under impact load and static tensile loading is described. The spatial and temporal evolution of the surface temperature enables us to distinguish matrix cracks or fibre-matrix separation from delaminations between the layers. Afterwards, all results for loading defects, obtained by passive and active thermography, are compared with each other. Fig. 1 and 2 show the difference of passive and flash thermography obtained at impact and tensile loaded CFRP plates, respectively. As one purpose of these investigations is the development of standards within national (DIN) and European (CEN) standardisation bodies, new draft and final standards are presented and further needs are discussed at the end of the presentation. T2 - INTERNATIONAL SCHOOL OF QUANTUM ELECTRONICS, 62nd Course, Progress in Photoacoustic & Photothermal Phenomena CY - Erice, Italy DA - 06.09.2018 KW - Thermography KW - Flash thermography KW - Lock-in thermography KW - CFRP KW - GFRP PY - 2018 AN - OPUS4-46283 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Müller, H. S. A1 - Fenchel, M. A1 - Wiggenhauser, Herbert A1 - Maierhofer, Christiane A1 - Krause, Martin A1 - Gardei, André A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Röllig, Mathias A1 - Wöstmann, Jens T1 - Zerstörungsfreie Ortung von Gefügestörungen in Betonbodenplatten N2 - Das Ziel des Forschungsvorhabens „Zerstörungsfreie Ortung von Gefügestörungen in Betonbodenplatten“ bestand in der Entwicklung eines Untersuchungskonzepts zur sicheren Ortung und Erfassung von Gefügestörungen in einseitig zugänglichen Betonplatten durch den kombinierten Einsatz verschiedener zerstörungsfreier Prüfverfahren. Hierfür wurde die Leistungsfähigkeit der folgenden Messverfahren hinsichtlich ihrer Aussageschärfe, Anwendungsgrenzen und Messgeschwindigkeit bei praxisnahen Randbedingungen untersucht: - Impakt-Echo, manuelle Impaktauslösung - Impakt-Echo, automatisierte Impaktauslösung - Ultraschall-Echo mit multistatischem Array - Impuls-Thermografie - Radar Als Versuchskörper dienten sechs liegend hergestellte Betonplatten der Abmessungen 200/200/30 cm aus zwei verschiedenen Betongüten und mit unterschiedlichem Bewehrungsgehalt (Bewehrungsgrade 0 %, 0 ,9 %, 2 ,6 %), von denen vier Platten auf trockenem und zwei Platten auf ständig nass gehaltenem Sand gelagert waren. Alle sechs Platten enthielten jeweils dieselben künstlich eingebrachten Fehlstellen: vier quadratische Kiesnester in unterschiedlicher Tiefe mit Kantenlängen zwischen 10 und 15 cm sowie drei oberflächennahe Hohlstellen (Ø 4/6/8 cm). Zur Erfassung eines möglichen Einflusses des Betonalters wurden die Messungen 4 Tage, 28 Tage sowie 180 Tage nach Herstellung der Platten durchgeführt. Um aus den Untersuchungen einen breiten Nutzen für die Praxis zu erzielen, basierten die eingesetzten Messverfahren auf handelsüblichen Geräten, welche jedoch bezüglich ihres Messprinzips und insbesondere der Datenerfassung und -auswertung weiterentwickelt wurden. Die Fehlstellengröße wurde bewusst klein gewählt. Mit Ausnahme des manuellen Impakt-Echo-Verfahrens, mit welchem unter Verwendung der Originalsoftware des Herstellers keine Fehlstellen nachweisbar waren, zeigten sich alle Messverfahren geeignet, unter verschiedenen Randbedingungen Gefügestörungen zu lokalisieren. Insgesamt wurde jeder Fehlstellentyp von zumindest einem Verfahren bei mindestens zwei Versuchskörpern detektiert. Es konnten jedoch an keiner Betonplatte mit einem einzelnen Messverfahren alle vorhandenen Fehlstellen an allen Messterminen geortet werden. Am häufigsten wurden die beiden großen oberflächennahen Fehlstellen (Hohlstelle Ø 8 cm, Kiesnest 10 cm) erkannt. Am schwersten zu lokalisieren waren die kleine Hohlstelle mit 4 cm Durchmesser sowie die beiden auf der Unterseite gelegenen Kiesnester. Die Untersuchungen zeigen, dass für eine erfolgreiche Anwendung zerstörungsfreier Messverfahren in der Praxis die Auswahl des am besten geeigneten Verfahrens bzw. einer Kombination verschiedener Verfahren jeweils auf die vorliegende Problemstellung abgestimmt sein muss. Für Betonbodenplatten mit hohem Feuchtegehalt (junger Beton) oder starker Bewehrung ist entweder das Ultraschall- oder das Impakt-Echo-Verfahren geeignet. Das Ultraschall-Verfahren wird von hohen Bewehrungsgehalten zwar stärker beeinflusst als das Impakt-Echo-Verfahren, besitzt aber eine bessere Auflösung und ermöglicht auch im oberflächennahen Bereich eine quantitative Bestimmung der Fehlstellentiefe. Das Impakt-Echo-Verfahren kann wegen der niederfrequenten Impulsanregung Fehlstellen erst in größeren Tiefen und mit schlechterer Auflösung nachweisen, ist aber ideal geeignet zur Bestimmung der Plattendicke aufgrund seines signifikanten Rückwandechos. Sowohl das Radar-Verfahren als auch die Impuls-Thermografie können bei hohen Feuchte- und Bewehrungsgehalten nur sehr oberflächennah eingesetzt werden. Bei trockenem Beton und geringen bis mittleren Bewehrungsgehalten liefert das Radar-Verfahren sehr gute Ergebnisse. In kurzer Zeit ermöglicht es eine flächendeckende Ortung der Tiefenlage und Größe von Inhomogenitäten bei guter Auflösungsgenauigkeit. Vorhandene Bewehrung wird deutlich abgebildet, kann aber darunterliegende Fehlstellen verschatten. Alternativ kann die Impuls-Thermografie für die Ortung oberflächennaher Gefügestörungen eingesetzt werden. Das Verfahren eignet sich insbesondere bei Oberflächen, die nicht direkt zugänglich sind, da zwischen Infrarotkamera und Messobjekt nur Sichtkontakt bestehen muss. Die Betongüte hatte bei keinem eingesetzten Verfahren einen erkennbaren Einfluss auf die Messergebnisse. Streng genommen ist dies jedoch nur für den Einfluss des Wasserzementwertes, der Zementart und des Zementgehalts bei gleichbleibender Sieblinie und gleicher Kornart gültig. Bei Verwendung von Leichtzuschlag sind abweichende Ergebnisse denkbar. PY - 2010 SN - 978-3-410-65075-1 SN - 0171-7197 IS - 589 SP - 1 EP - 88 PB - Beuth CY - Berlin AN - OPUS4-22699 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tang, Chi-Long A1 - Seeger, Stefan A1 - Röllig, Mathias T1 - Improving the comparability of FFF-3D printing emission data by adjustment of the set extruder temperature N2 - Fused filament fabrication (FFF) is a material extrusion-based technique often used in desktop 3D printers. Polymeric filaments are melted and are extruded through a heated nozzle to form a 3D object in layers. The extruder temperature is therefore a key parameter for a successful print job but also one of the main emission driving factors as harmful pollutants (e.g., ultrafine particles) are formed by thermal polymer degradation. The awareness of potential health risks has increased the number of emission studies in the past years. However, studies usually refer their calculated emission data to the printer set extruder temperature for comparison purposes. In this study, we used a thermocouple and an infrared camera to measure the actual extruder temperature and found significant temperature deviations to the displayed set temperature among printer models. Our result shows that printing the same filament feedstocks with three different printer models and with identical printer set temperature resulted in a variation in particle emission of around two orders of magnitude. A temperature adjustment has reduced the variation to approx. one order of magnitude. Thus, it is necessary to refer the measured emission data to the actual extruder temperature as it poses a more accurate comparison parameter for evaluation of the indoor air quality in user scenarios or for health risk assessments. KW - Ultrafine particles KW - Infrared thermography KW - Thermocouple KW - Indoor air quality KW - FFF-3D printer PY - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-572842 VL - 18 SP - 100217 PB - Elsevier Ltd. CY - Amsterdam, Niederlande AN - OPUS4-57284 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Rehmer, Birgit A1 - Gower, M. A1 - Baker, G. A1 - Lodeiro, M. A1 - Aktas, A. A1 - Knaszovicka, L. A1 - Blahut, A. A1 - Monte, C. A1 - Adibekyan, A. A1 - Gutschwager, B. T1 - Characterisation of artificial defects in CFRP and GFRP sheets designed for energy applications using active thermography N2 - The increased use of fibre-reinforced plastic (FRP) composites for improved efficiency and reliability in energy related applications e.g. wind and marine turbine blades, nacelles, oil and gas flexible risers, also increases the demand for innovative non-destructive testing technologies. Thus, in order to achieve increased acceptance of suited and optimized non-destructive testing (NDT) methods in industry, the European Metrology Research Programme (EMRP) project ENG57 Validated Inspection Techniques for Composites in Energy Applications (VITCEA) deals with the development and validation of innovative NDT technologies. In this contribution, results concerning thermographic investigations at test specimens during tensile loading and active thermography testing after tensile loading are presented. Additionally, the determination of the optical properties (relative transmittance and directional spectral emissivity) of CFRP and GFRP test specimens is described. T2 - Conference QIRT 2016 CY - Gdansk, Poland DA - 04.07.2016 KW - Active thermography KW - CFRP KW - GFRP KW - Validation of methods PY - 2016 UR - http://qirt.gel.ulaval.ca/archives/qirt2016/papers/076.pdf U6 - https://doi.org/10.21611/qirt.2016.076 SN - 2371-4085 SP - Paper 076, 527 EP - 536 CY - Quebec, Canada AN - OPUS4-37512 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Krankenhagen, Rainer A1 - Röllig, Mathias A1 - Rehmer, Birgit A1 - Gower, M. A1 - Baker, G. A1 - Lodeiro, M. A1 - Aktas, A. A1 - Monte, C. A1 - Adibekyan, A. A1 - Gutschwager, B. T1 - Defect characterisation of tensile loaded CFRP and GFRP laminates used in energy applications by means of infrared thermography N2 - The increased use of fibre reinforced plastic (FRP) composites for improved efficiency and reliability in energy related applications, e.g. wind and marine turbine blades, nacelles, oil and gas flexible risers, also increases the demand for innovative non-destructive testing technologies. In this contribution, results concerning the characterisation of CFRP and GFRP during and after quasi-static tensile loading are presented. It includes the measurement of optical properties in the infrared spectral range, tensile loading tests with the observation of the temperature distribution at one or both sides of the specimens using an infrared camera for the preparation and monitoring of intended natural defects, and active thermography inspections after tensile loading. It is shown that the defect preparation was successful. Thermographic monitoring during and active thermography testing after tensile loading enable the detection of the lateral extend of the generated defects. Differences between CFRP and GFRP materials are discussed. KW - Tensile loading KW - Fibre reinforced composites KW - Active and passive thermography KW - Emissivity PY - 2017 U6 - https://doi.org/10.1080/17686733.2017.1334312 SN - 1768-6733 SN - 2116-7176 VL - 15 IS - 1 SP - 17 EP - 36 PB - Taylor and Francis CY - London AN - OPUS4-40968 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Harrer, Andrea A1 - Nies, Daniel A1 - Pulz, Robert A1 - Röllig, Mathias A1 - Rehmer, Birgit T1 - Untersuchung von Transport- und Schädigungsprozessen in Keramiken und mineralischen Baustoffen mit lokal und global angeregter aktiver Thermografie N2 - In diesem Beitrag wird die Entwicklung eines aktiven Thermografieverfahrens zur zeit- und ortsaufgelösten in-situ und Echtzeit-Visualisierung von Transport- und Schädigungsprozessen für Anwendungen in Industrie und Umwelt vorgestellt. Das Verfahren ermöglicht unter Verwendung verschiedener thermischer Anregungsquellen u.a. die Bestimmung der thermischen Materialeigenschaften von Keramiken und trockenen und feuchten mineralischen Baustoffen. Schädigungsprozesse in Keramiken können in-situ visualisiert werden. Weiterhin werden Messergebnisse vorgestellt, die während des kapillaren Feuchtetransports in Naturstein erfasst wurden und diesen abbilden können. T2 - Sensoren und Messsysteme 2010 - 15. ITG/GMA-Fachtagung CY - Nürnberg, Deutschland DA - 2010-05-18 PY - 2010 SN - 978-3-8007-3260-9 IS - Paper 116 SP - 658 EP - 663 PB - VDE Verlag GmbH CY - Berlin, Offenbach AN - OPUS4-21949 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -