TY - CONF A1 - Hussels, Maria-Teresa A1 - Gründer, Klaus-Peter A1 - Pötschke, Samuel A1 - Chruscicki, Sebastian T1 - 2-Monochromatoren-Methode zur Bewertung der Signalwirkung verschiedener Fluoreszenzfarbstoffe unter variierenden Beleuchtungsspektren N2 - Die verbesserte Signal- und Warnwirkung fluoreszierender Materialien gewinnt in vielen Bereichen zunehmend an Bedeutung, so z.B. für Warn- und Schutzkleidung, Schulranzen und Verkehrsschilder. Gleichzeitig führt der Trend zu LED-Beleuchtung in Innenräumen und auch im Straßenverkehr zu einer Diversifikation der spektralen Verteilung, welche die Fluoreszenz anregt. Ein weiteres Beispiel hierfür ist die Verwendung fluoreszierender Farbstoffe in der zerstörungsfreien Prüfung von Werkstoffen. Sowohl bei der fluoreszierenden Eindringprüfung als auch der Magnetpulverprüfung werden Risse durch fluoreszierende Farbstoffe optisch angezeigt. Beide Verfahren beruhen entsprechend der Stokesschen Regel auf der Energieverschiebung im Spektrum fluoreszierender Materialien gegenüber dem Anregungsspektrum hin zu größeren Wellenlängen, so dass das fluoreszierte Licht vom reflektierten Anregungslicht unterschieden werden kann. Auch hier kommt zunehmend LED-Technik zum Einsatz, wobei die Anregung im UV-, in letzter Zeit auch im blauen Spektralbereich erfolgt. Um die Erfüllung sicherheitstechnischer Normen zu gewährleisten, muss die Charakterisierung der spektralen und integraloptischen Eigenschaften fluoreszierender Substanzen unter Berücksichtigung verschiedenster anregender Lichtarten erfolgen. Nur die bispektrale 2-Monochromatoren-Methode (2MM) liefert eine bestrahlungsunabhängige materialcharakteristische Größe, die sogenannte Donaldson-Matrix, aus welcher die Reflexions- und Fluoreszenzstrahldichtefaktoren sowie Anregungsspektren und Farbmaßzahlen für beliebige spektrale Verteilungen der Bestrahlung bzw. Normlichtarten und unterschiedliche Normalbeobachter hervorgehen. Bei der 2MM wird die Probe mit monochromatischer Strahlung beleuchtet und das erzeugte Emissionsspektrum für jede Anregungswellenlänge gemessen. Der modernisierte bispektrale Messplatz in der Bundesanstalt für Materialforschung und –prüfung (BAM) erlaubt u.a. den Einsatz eines Arrayspektrometers anstelle des Detektionsmonochromators, so dass die Messzeit erheblich reduziert wird. Zusätzlich steht in der BAM ein Spektroradiometer (OL 750, Optronic Laboratories, Inc.) zur Verfügung, mit dem die spektrale Bestrahlungsstärke verschiedener Leuchtmittel erfasst werden kann. Zusammen mit der durch die 2MM bestimmten Donaldson-Matrix kann so die Signalwirkung z.B. eines Fluoreszenzfarbstoffes für die Rissdetektion in Materialien unter diesen bestimmten Beleuchtungsbedingungen bewertet werden. Im Beitrag wird dieses Zusammenspiel beispielhaft für verschiedene fluoreszierende Rissprüfmittel und Anregungslichtquellen diskutiert. T2 - Lux Junior 2013 - 11. Internationales Forum für den lichttechnischen Nachwuchs CY - Dörnfeld/Ilmenau, Germany DA - 27.09.2013 PY - 2013 SN - 978-3-927787-46-9 SP - 1 EP - 7 AN - OPUS4-29324 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Johann, Sergej A1 - Baensch, Franziska A1 - Sturm, Patrick A1 - Tiebe, Carlo A1 - Pötschke, Samuel A1 - Lay, Vera ED - Holl, H. T1 - HF RFID-based measurement comparison for method optimization in M2 concrete and alkali-activated mortars N2 - Monitoring of repositories for radioactive waste requires techniques which can be applied long-term under harsh conditions. In this work, the reliability and suitability of materials and a capacitive sensor for measuring relative humidity are investigated, which are to be embedded in the special concrete components for the closure structures of underground repository. Preliminary tests with accelerated aging of the materials used, validation of the sensors under difficult conditions, investigations of the surfaces after aging by pH 14 solution, defined exposure of the sensors in a climatic chamber and the microscope images are discussed. The results will be used for further development and optimization of the RFID based sensor systems which can be applied to monitor the condition of different building structures without cabling. T2 - 37th Danubia - Adria Symposium on Advances in Experimental Mechanics CY - Linz, Austria DA - 21.09.2021 KW - Alkali-activated mortars KW - Passive sensor interface KW - RFID KW - Structural health monitoring KW - Smart structures PY - 2022 U6 - https://doi.org/10.1016/j.matpr.2022.03.465 SN - 2214-7853 VL - 62 IS - 5 SP - 2571 EP - 2576 PB - Elsevier CY - Amsterdam AN - OPUS4-54697 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Johann, Sergej A1 - Baensch, Franziska A1 - Strurm, Patrick A1 - Tiebe, Carlo A1 - Pötschke, Samuel A1 - Lay, Vera ED - Hall, H. T1 - HF RFID-based Measurement Comparison for Method Optimization in M2 Concrete and Alkali-Activated Mortars N2 - The internal project "SealWasteSafe" of the Federal Institute for Materials Research and Testing is dedicated to the further improvement in the construction of sealing systems for underground repositories of radioactive waste. Particularly, a multi-sensory concept is developed to ensure quality assurance and continuous long-term monitoring on the engineered barriers. Therefore, beside other measures, the temperature and equilibrium moisture of the construction shall be monitored and respective multi-sensoric monitoring concepts are tested first on the laboratory scale. One focus in this project is on embedded application in alkali-activated mortars (AAM), which results in special requirements for the resistance of the sensors to strongly alkaline environments with up to pH 14. In addition, the ingress of water along cables or at sensor positions is critical for sensors embedded in concrete, as the cable access of the sensor housing is a major weak point. It is therefore advisable to equip wireless high frequent radio frequency identification-based sensors, so called HF RFID sensors (short: RFID), that do not require cable access and thus have a stable and leak-proof sensor housing for long-term monitoring. In this contribution, the results from temperature, moisture and transmitted power monitoring of a AAM and a M2 specimens by means of HF RFID sensor systems are presented. T2 - 35th Danubia - Adria Symposium on Advances in Experimental Mechanics CY - Linz, Österreich DA - 21.09.2021 KW - Passive sensor interface KW - RFID KW - Structural Health Monitoring KW - Alkali-Activated Mortars PY - 2021 SN - 978-3-9504997-0-4 SP - 116 EP - 117 AN - OPUS4-53397 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pötschke, Samuel A1 - Breithaupt, Mathias A1 - Chruscicki, Sebastian A1 - Gründer, Klaus-Peter A1 - Hussels, Maria-Teresa A1 - Muschik, Bernd T1 - Akkreditierte fotometrische und spektraloptische Messverfahren T2 - 40. Jahrestagung der deutschen farbwissenschaftlichen Gesellschaft (DfwG) CY - Wuppertal, Germany DA - 2014-09-23 PY - 2014 AN - OPUS4-31619 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stajanca, Pavol A1 - Topolniak, Ievgeniia A1 - Pötschke, Samuel A1 - Krebber, Katerina T1 - Solution-mediated cladding doping of commercial polymer optical fibers N2 - Solution doping of commercial polymethyl methacrylate (PMMA) polymer optical fibers (POFs) is presented as a novel approach for preparation of custom cladding-doped POFs (CD-POFs). The presented method is based on a solution-mediated diffusion of dopant molecules into the fiber cladding upon soaking of POFs in a methanol-dopant solution. The method was tested on three different commercial POFs using Rhodamine B as a fluorescent dopant. The dynamics of the diffusion process was studied in order to optimize the doping procedure in terms of selection of the most suitable POF, doping time and conditions. Using the optimized procedure, longer segment of fluorescent CD-POF was prepared and its performance was characterized. Fiber’s potential for sensing and illumination applications was demonstrated and discussed. The proposed method represents a simple and cheap way for fabrication of custom, short to medium length CD-POFs with various dopants. KW - Polymer optical fiber KW - Solution doping KW - Polymethyl methacrylate KW - Rhodamine B KW - Dye-doped fiber KW - Fluorescent optical fiber PY - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-441045 SN - 1068-5200 SN - 1095-9912 VL - 41 SP - 227 EP - 234 PB - Elsevier Inc. AN - OPUS4-44104 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stajanca, Pavol A1 - Topolniak, Ievgeniia A1 - Pötschke, Samuel A1 - Krebber, Katerina ED - Kalli, K. ED - Mendez, A. ED - Bunge, C.-A. T1 - Solution doping of commercial plastic optical fibers N2 - Solution doping of off-the-shelf plastic optical fibers (POFs) represents rather simple and cheap way for preparing custom cladding-doped POFs (CD-POFs) with short to medium lengths. CD-POFs are especially attractive for environmental sensing applications, but might be of interest for illumination task as well. In this work, the proposed doping technique is tested with three different commercial low-cost polymethyl methacrylate (PMMA) POFs; Eska CK-40 and Eska GK-40 from Mitsubishi Rayon and Raytela PGU-FB1000 from Toray. The aim of the work is to aid the selection of the most suitable fiber yielding highest optical quality of prepared CD-POFs. Firstly, the optimal doping times are determined for the individual fiber types using short fiber samples. Secondly, longer 10 m CD-POFs are prepared from all tested fibersusing the optimized doping procedure. Finally, attenuation of pristine POFs and prepared CD-POFs is measured using optical time domain reflectometry in order to characterize the impacts of the doping on fiber optical properties. In addition, the importance of post-doping drying procedure for CD-POF optical performance is investigated as well. The results suggest that, although doping of all tested fibers is generally feasible, Eska CK-40 is the most suitable candidate with regard to the Doping efficiency and fiber post-doping performance. T2 - SPIE Photonics Europe 2018 CY - Strasbourg, France DA - 22.04.2018 KW - Plastic optical fibers KW - Solution doping KW - Polzmethyl methacrylate KW - PMMA KW - Rhodamine B KW - Fluorescent optical fibers KW - Cladding-doped fibers PY - 2018 U6 - https://doi.org/10.1117/12.2315619 SN - 0277-786X VL - 10681 SP - 106810O-1 EP - 106810O-7 AN - OPUS4-44907 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wosniok, Aleksander A1 - Skoczowsky, Danilo A1 - Schukar, Marcus A1 - Pötzsch, Sina A1 - Pötschke, Samuel A1 - Krüger, Simone T1 - Fiber optic sensors for high-temperature measurements on composite tanks in fire N2 - For the purpose of increasing payload and reduce freight cost, lightweight composite tank containers used for Transportation have been progressively developed during the last years. Compared to conventionally produced cylindrical steel tanks, the fiber-reinforced solutions allow greater flexibility in the tank design. Despite a number of further material-related benefits of fiber-reinforced composites as non-conductive and non-magnetic behavior as well as corrosion resistance and high strength, the optimization of their thermal degradation properties during combustion is still a challenge. To improve the fire performance of lightweight composite containers, special intumescent fire protection coatings can be applied onto the outside tank surface. This paper presents fire tests on glass-fiber-reinforced plastic transport tanks with complex geometries sheltered with different surface-applied fire protection systems. To evaluate the fire resistance of the tank structures, a fiber optic monitoring system was developed. This system is based on distributed temperature measurements using high-Resolution optical backscatter reflectometry and pointwise reference measurements using fiber Bragg gratings. Thereby, all the fiber optic sensors were directly integrated in the composite layer structure of the tanks. The focus of the presented work is on the demonstration of capability of fiber optic monitoring system in such high-temperature application. Moreover, the fiber optic measurements provide new insights into the efficiency of intumescent coating applied for fire protection of fiber-reinforced plastic transport tanks. KW - Fire resistance KW - Composite material KW - Glass-fiber-reinforced plastic transport tank KW - Distributed fiber optic sensing KW - Optical backscatter reflectometry KW - Fiber optic sensor PY - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-481972 SN - 2190-5452 SN - 2190-5479 SP - 1 EP - 8 PB - Springer Nature AN - OPUS4-48197 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hofmann, Detlef A1 - Basedau, Frank A1 - Pötschke, Samuel A1 - Breithaupt, Mathias A1 - Schukar, Marcus T1 - Funktionsprinzip faseroptischer Sensoren N2 - Das Poster präsentiert die Grundlagen zur Funktionsweise optischer Fasern bzw. faseroptischer Sensoren, die im Rahmen eines Feldversuchs zum Einsatz kommen. T2 - Tag der offenen Tür auf dem Testgelände der BAM (BAM TTS) CY - Horstwalde, Germany DA - 29.09.2018 KW - Faseroptische Sensorik KW - Verteilte Messverfahren KW - Quasi-verteilte Messverfahren PY - 2018 AN - OPUS4-46333 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hofmann, Detlef A1 - Basedau, Frank A1 - Pötschke, Samuel A1 - Breithaupt, Mathias A1 - Schukar, Marcus T1 - Die durchleuchtete Brücke N2 - Das Poster gibt einen Überblick zum Themenfeldprojekt BLEIB und präsentiert ausgewählte Ergebnisse faseroptischer Messungen bei verschiedenen Belastungsszenarien an der Versuchsbrücke. T2 - Tag der offenen Tür auf dem Testgelände der BAM (BAM TTS) CY - Horstwalde, Germany DA - 29.09.2018 KW - Bauwerksüberwachung KW - Faseroptische Sensorik KW - Dehnungsmessung KW - Temperaturmessung KW - Verteilte Messverfahren PY - 2018 AN - OPUS4-46334 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -