TY - RPRT A1 - Ferrero, Fabio A1 - Malow, Marcus A1 - Schmidt, Martin A1 - Krause, Ulrich T1 - Leitfaden zur Brandvermeidung bei der Lagerung von Biomasse N2 - Die Menge an genutztem, verarbeitetem und gelagertem Holz steigt von Jahr zu Jahr. In der Folge konnte in den letzten fünf Jahren eine deutlich gestiegene Zahl von Bränden in Holzlagern und -halden festgestellt werden. Viele dieser Brände sind durch Selbstentzündung des Materials verursacht worden. Sind die Ursachen der Selbstentzündung bekannt, kann die Brandentstehung durch geeignete Maßnahmen vermieden werden. Die Fachgruppe II.2 „Reaktionsfähige Stoffe und Stoffsysteme“ der Bundesanstalt für Materialforschung und -prüfung hat in diesem Leitfaden das Thema aufgegriffen und die derzeit vorliegenden Erkenntnisse zusammenfassend dargestellt. Ziel des Leitfadens ist es, die Grundlagen der Selbstentzündung von Biomasse am Beispiel von Holz in übersichtlicher Form darzustellen und daraus praktische Hinweise zur Vermeidung der Selbstentzündung von Holzhalden abzuleiten, um so einen Weg für einen sicheren und nachhaltigen Umgang mit diesem Rohstoff zu ebnen. Dem Leitfaden liegen Ergebnisse des Forschungsvorhabens „Brandvermeidung bei der Lagerung von biogenen Brennstoffen“ zugrunde. Das Projekt wurde innerhalb der Fördermaßnahme „klimazwei – Forschung für den Klimaschutz und Schutz vor Klimawirkungen“ des Bundesministeriums für Bildung und Forschung finanziell gefördert (Förderkennzeichen 01LS05079). Für diese Förderung möchten die Autoren sich bedanken. T3 - BAM Forschungsberichtreihe - 284 PY - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-1678 SN - 978-3-9812354-1-8 SN - 0938-5533 VL - 284 SP - 1 EP - 22 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-167 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Schoßig, Jörg A1 - Berger, Anka A1 - Malow, Marcus A1 - Krause, Ulrich T1 - Beurteilung und Verhinderung von Selbstentzündung und Brandgasemission bei der Lagerung von Massenschüttgütern und Deponiestoffen N2 - Im Ergebnis des Vorhabens steht für die praktische Anwendung eine wissenschaftlich fundierte Methode der Gefahrenbewertung für Selbstentzündungsvorgänge bei der Lagerung von Massenschüttgütern, Deponiestoffen und Recyclingmaterialien zur Verfügung. Diese Methode besteht aus drei Bestandteilen: - Experimentelle Bestimmung der relevanten physiko-chemischen Eigenschaften des Materials, - Experimentelle Bestimmung des Reaktionsverhalten mittels thermischer Analyseverfahren, - Vorhersage der Selbstentzündung und des Brandverlaufes durch numerische Simulation anhand der realen Geometrie der Lageranordnung. Eine solche Methode wurde bisher nicht systematisch angewendet, weshalb sowohl bei der Erstellung von Brandschutzkonzepten durch die Betreiber von Deponien oder Recyclinglagern als auch bei der Genehmigung solcher Anlagen durch die Behörden große Unsicherheit bezüglich des vorbeugenden Brandschutzes bestehen. Diese Unsicherheiten können mit den Ergebnissen des Vorhabens ausgeräumt werden. Den Nutzen hieraus ziehen vor allem KMU, die den Hauptteil der Betreiberfirmen von Deponien und Recyclinglagern stellen. Darüber hinaus erwuchsen aus dem Vorhaben auch grundlegende Erkenntnisse zum thermischen und Reaktionsverhalten solcher Lager: - Gemische von Kunststoffen mit zellulosehaltigen oder faserartigen Stoffen sowie Gemische von Kunststoffen mit inerten Stoffen zeigen eine stärkere Selbstentzündungsgefahr als reine Kunststoffe. - Auch bei sehr geringen Anteilen brennbarer Stoffe kommt es noch zu gefährlicher Wärmefreisetzung. - Bei heterogener Verteilung der brennbaren Komponente (brennbare Einschlüsse in nicht-brennbarem Material) kann eine „Übertragung“ der Zündung zwischen brennbaren Einschlüssen erfolgen. Dies spiegelt z.B. die Situation in Lagern für Baumischabfälle wieder. Mit dem im Vorhaben entwickelten mathematischen Modell können Selbstentzündungsprozesse in beliebigen Lageranordnungen vorhergesagt werden. Die Ziele des Vorhabens wurden erreicht. Weiterer Forschungsbedarf wurde zu folgenden Teilaspekten erkannt: - Selbstentzündungsverhalten von Abfällen, die als sogenannte Ersatzbrennstoffe aufbereitet werden (Pressballen mit und ohne Folieumwicklung), - tiefer gehende Klärung der Reaktionsmechanismen beim Abbrand von Abfallgemischen. T3 - BAM Forschungsberichtreihe - 291 PY - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-1600 SN - 978-3-9813346-6-1 SN - 0938-5533 VL - 291 SP - 1 EP - 56 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-160 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Krause, Ulrich T1 - The overall activation energy of the exothermic rections of thrmally unstable materials T2 - 4th International Seminar on Fire and Explosion Hazards CY - Londonderry, Northern Ireland DA - 2003-09-08 PY - 2003 AN - OPUS4-3935 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Krause, Ulrich A1 - Wehrstedt, Klaus-Dieter T1 - Is the UN H.4 test a suitable test to determine the SADT for solids in a 50 kg packaging or not? T2 - Meeting TNO/BAM CY - Rijswijk, Netherlands DA - 2003-09-18 PY - 2003 AN - OPUS4-3936 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Krause, Ulrich A1 - Wehrstedt, Klaus-Dieter T1 - Some comments on the paper of H. Fierz: Influence of heat transport mechanisms on transport classification by SADT-measurement as measured by the Dewar-method PY - 2003 U6 - https://doi.org/10.1016/S0304-3894(03)00221-8 SN - 0304-3894 VL - 103 SP - 169 EP - 173 PB - Elsevier CY - Amsterdam AN - OPUS4-2687 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Schulze, A. A1 - Krause, Ulrich T1 - The main gaseous products and the mass loss during the self-ignition of combustible materials T2 - 6th International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions CY - Halifax, Canada DA - 2006-08-27 KW - Self-ignition KW - Combustion KW - Biomass KW - FTIR-gas-measurements KW - Macro-thermal balance PY - 2006 SN - 0950-4230 SN - 1873-3352 SP - 825 EP - 836 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-12892 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lohrer, Christian A1 - Schmidt, Martin A1 - Malow, Marcus A1 - Krause, Ulrich A1 - Steinbach, J. T1 - Einfluss von Feuchte und Konvektionsströmung auf das Selbstentzündungsverhalten von Feststoffschüttungen KW - Selbstentzündung KW - Konvektion KW - Feuchte PY - 2005 U6 - https://doi.org/10.1002/cite.200590078 SN - 0009-286X SN - 1522-2640 VL - 77 IS - 8 SP - 1141 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-10847 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Steensma, M. A1 - Schuurman, P. A1 - Malow, Marcus A1 - Krause, Ulrich A1 - Wehrstedt, Klaus-Dieter T1 - Evaluation of the validity of the UN SADT H.4 test for solid organic peroxides and self-reactive substances N2 - Many self-accelerating decomposition temperatures (SADTs) of solid organic peroxides and self-reactive substances have been determined with the UN test method H.4, which is a scaled down test in a small Dewar vessel. For solid organic peroxides and solid self-reactive substances Fierz has questioned this procedure in a recent paper. Fierz concluded that the Dewar test results should not be extrapolated to beyond 8 l packages, owing to the thermal insulation value of solids. On the other hand, long term experience with the test, with a great variety of solid organic peroxides and self-reactive substances show about equal critical temperatures in the small Dewar vessel and on 50 kg scale. In the present work, we first checked, by numerical simulations, the Dewar scale versus the larger scale, in a way comparable with Fierz’ method: both scales are simulated by spheres, consisting of a number of annular layers, for the large scale the usual external heat loss term is used but for the small scale the outside heat transfer is strongly limited. The outcome of these simulations, covering a variety of physical parameters, supports the concerns expressed by Fierz. After this, we performed accurate cooling and heating experiments with solid organic peroxide in the usual Dewar vessel, provided with a large set of thermocouples. The results of these experiments showed that the simulation model for the Dewar vessel has to be changed from a spherical analogue to a short cylinder of solid material with heat exchange mainly via its top (Utop 3.5 W/(m2 K), overall heat transfer coefficient) and some heat exchange (Uside 0.29 W/(m2 K)) through its cylindrical and bottom part. With this “modified cylinder” model (being neither an infinitely long cylinder nor a slab) of the Dewar vessel, we found that the UN method H.4 enables an accurate prediction of the SADT, with small deviations of 0 ± 2.5 °C. Further, by performing a truly three-dimensional (3D) finite element calculation in FEMLAB, the new heat characteristics of the Dewar vessel as well as a 50 kg package of dilauroyl peroxide, a solid organic peroxide, were checked. The outcome was compared with the critical ambient temperatures known for various package sizes, which agreed well. KW - SADT of solids KW - Transport regulations KW - UN H.4 test (HAST) KW - Numerical simulations KW - Scale-up procedure PY - 2005 U6 - https://doi.org/10.1016/j.jhazmat.2004.09.028 SN - 0304-3894 VL - 117 IS - 2-3 SP - 89 EP - 102 PB - Elsevier CY - Amsterdam AN - OPUS4-5604 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Krause, Ulrich T1 - The overall activation energy of the exothermic reactions of thermally unstable materials N2 - The exothermic reactions of thermally unstable materials have been studied using self-heating methods in a wire-mesh-reactor as well as temperature-programmed methods utilizing a differential scanning calorimeter (DSC). Samples of lignite coal dust, cork dust, detergent powder and riboflavin (vitamin B2) were investigated. The overall activation energy E could be determined for each method. For lignite coal and cork dust all techniques show very nice agreement in E. For the detergent powder, the values are comparable except for the heat-release (HR) rate method value which is about 50–60 kJ/mol higher. Riboflavin on the other hand shows a different behaviour. The DSC-experiments lead to values being significantly higher compared to the self-heating values. The existing differences are clearly worked out. KW - Overall activation energy KW - Decomposition reactions KW - Self-heating KW - DSC PY - 2004 U6 - https://doi.org/10.1016/j.jlp.2003.09.002 SN - 0950-4230 SN - 1873-3352 VL - 17 IS - 1 SP - 51 EP - 58 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-4973 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Martin A1 - Malow, Marcus A1 - Lohrer, Christian A1 - Krause, Ulrich T1 - Selbstentzündung von Stäuben und Schüttgütern bei vermindertem Sauerstoffgehalt PY - 2002 UR - http://www3.interscience.wiley.com/journal/91014775/issue SN - 0009-286X SN - 1522-2640 VL - 74 IS - 12 SP - 1 EP - 6 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-5993 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schälike, Stefan A1 - Mishra, Kirti Bhushan A1 - Malow, Marcus A1 - Berger, Anka A1 - Wehrstedt, Klaus-Dieter A1 - Schönbucher, A. ED - Pierucci, S. ED - Klemes, J.J. ED - De Rademaeker, E. ED - Fabiano, B. ED - Buratti, S.S. T1 - Mass burning rate of a large TBPB pool fire - experimental study and modeling N2 - Data and prediction for the mass burning rate of a tert-butyl-peroxy-benzoat (TBPB) pool fire (pool diameter = 3 m) is presented. The mass burning rates of TBPB fires are up to six times higher and less dependent on pool diameter compared to hydrocarbon pool fires caused by an additional heat release rate due to exothermic decomposition reaction in the liquid phase. This heat release rate is calculated using a 1st order reaction kinetic obtained from micro calorimetric measurements. A new model is derived considering the heat release rate due to the decomposition reaction which is shown to be 100 % of the heat release rate radiated to the pool surface. With the presented model, including also physical quantities, especially the limiting fuel concentration for upward flame propagation, it is possible to predict the mass burning rates of large TBPB pool fires. The predicted values are in very good agreement with the experiments. T2 - 14th International symposium on loss prevention and safety promotion in the process industries CY - Florence, Italy DA - 12.05.2013 KW - Mass burning rate KW - TBPB (tert-butyl-peroxy benzoat) KW - Pool fire KW - Experimental study KW - Modeling PY - 2013 SN - 978-88-95608-22-8 U6 - https://doi.org/10.3303/CET1331143 SN - 1974-9791 N1 - Serientitel: Chemical engineering transactions – Series title: Chemical engineering transactions IS - 31 SP - 853 EP - 858 PB - AIDIC, Associazione Italiana di Ingegneria Chimica CY - Milano AN - OPUS4-28501 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Gebauer, Norman T1 - Oxidizing properties of NH4NO3 in relation to its particle size T2 - IGUS EOS Meeting CY - Verneuil en Halatte, France DA - 2013-04-17 PY - 2013 AN - OPUS4-28542 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Berger, Anka A1 - Wehrstedt, Klaus-Dieter T1 - Classification of polymerizing substances T2 - IGUS EOS Meeting CY - Verneuil en Halatte, France DA - 2013-04-17 PY - 2013 AN - OPUS4-28543 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Clemens, J. T1 - Impact of Particle Size on the Oxidising Potential of Solids T2 - IGUS EOS Meeting CY - Berlin, Germany DA - 2012-05-07 PY - 2012 AN - OPUS4-26370 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Romahn, Tim-Michael A1 - Michael-Schulz, Heike T1 - Test results with different types of cellulose as reference material for the UN-Test O.1 T2 - IGUS EOS Meeting CY - Berlin, Germany DA - 2012-05-07 PY - 2012 AN - OPUS4-26371 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Michael-Schulz, Heike T1 - New validation results on the UN-Test N.5 T2 - IGUS EOS Meeting CY - Berlin, Germany DA - 2012-05-07 PY - 2012 AN - OPUS4-26372 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - Flammability of solids T2 - ECHA Trainig Course "Physical and Chemical Properties" CY - Berlin, Germany DA - 2011-10-24 PY - 2011 AN - OPUS4-25043 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - Oxidizing properties for solids and liquids T2 - ECHA Trainig Course "Physical and Chemical Properties" CY - Berlin, Germany DA - 2011-10-24 PY - 2011 AN - OPUS4-25044 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Krause, Ulrich T1 - Anwendbarkeit des UN SADT H.4-Tests für feste organische Peroxide KW - Selbstentzündung KW - Peroxide PY - 2005 U6 - https://doi.org/10.1002/cite.200590196 SN - 0009-286X SN - 1522-2640 VL - 77 IS - 8 SP - 1122 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-11572 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Michael-Schulz, Heike T1 - UN test series H - current project of BAM T2 - IGUS Energetic and Oxidising Substances (EOS) Working Group Meeting CY - Stockholm, Sweden DA - 2008-05-14 PY - 2008 AN - OPUS4-17471 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ferrero, Fabio A1 - Noll, Matthias A1 - Schmidt, Bernd A1 - Malow, Marcus A1 - Schmidt, Martin T1 - Experimentelle und numerische Analyse des Selbstentzündungsverhalten von Holzhalden T2 - 9. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Deutschland DA - 2008-11-06 KW - Brandvermeidung KW - Biomasse KW - Lagerung KW - Schüttgüter KW - Selbstentzündung PY - 2008 SN - 978-3-89746-099-7 SP - 1 EP - 21 PB - VDI, Hallescher Bezirksverein CY - Halle AN - OPUS4-18305 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Krause, Ulrich T1 - Anwendbarkeit des UN SADT H.4-Tests für feste organische Peroxide T2 - GVC/DECHEMA-Jahrestagung 2005 CY - Wiesbaden, Germany DA - 2005-09-06 PY - 2005 AN - OPUS4-11461 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter T1 - The ISTC-Project - a suitable approach to revise the UN-Test Series H? T2 - OECD - IGUS - EOS - working group meeting CY - Rijswijk, Netherlands DA - 2007-05-09 PY - 2007 AN - OPUS4-14847 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter T1 - Explosive properties of Triazole derivatives - A case study T2 - IGUS-EOS-working group meeting CY - Rijswijk, Netherlands DA - 2007-05-09 PY - 2007 AN - OPUS4-14848 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter T1 - The ISTC project from the current point of view of BAM T2 - Meeting of the ISCT project collaborators CY - Pfinztal, Germany DA - 2007-09-04 PY - 2007 AN - OPUS4-16023 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Ferrero, Fabio T1 - Brandvermeidung bei der Lagerung von biogenen Brennstoffen T2 - Klimazwei Tagung, Umweltforum CY - Berlin, Germany DA - 2007-02-28 PY - 2007 AN - OPUS4-16509 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Martin A1 - Malow, Marcus A1 - Krause, Ulrich A1 - Neumann, F. T1 - Untersuchung des Entzündungs- und Brandverhaltens von Steinkohlen unter dem Gesichtspunkt des Ex-Schutzes KW - Explosionsschutz KW - Steinkohle KW - Mahlanlagen KW - Selbstentzündung PY - 2007 SN - 1435-3199 VL - 87 IS - 7 SP - 67 EP - 72 PB - VGB PowerTech e.V. CY - Essen AN - OPUS4-15711 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Martin A1 - Malow, Marcus A1 - Krause, Ulrich ED - Thomas Stolz, ED - Heino Bothe, T1 - Vorhersage von Brandszenarien bei der Lagerung von Schüttgütern KW - Selbstentzündung KW - Schüttgüter KW - Kohle KW - Biomasse KW - Numerische Simulation PY - 2007 SN - 978-3-86509-700-2 SP - 90 EP - 101 PB - Wirtschaftsverl. NW, Verl. für Neue Wiss. CY - Braunschweig AN - OPUS4-16277 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Neuenfeld, S. T1 - On the explosive properties of 1H-benzotriazole and 1H-1,2,3-triazole N2 - For 1H-benzotriazole, no explosive properties are observable, but the relative high exothermic decomposition energy of 1590 J/g should be kept in mind. Nevertheless, an endothermic melting barrier at 100 °C ensures safe handling at lower temperatures. For 1H-1,2,3-triazole, the exothermic decomposition energy is as high as 2600 J/g, but explosive properties are also not detectable. Therefore, both reagents are hazardous with regard to the exothermic decomposition potential and can be handled safely with precautions. KW - 1H-Benzotriazole KW - 1H-1,2,3-Triazole KW - Explosive properties KW - DSC PY - 2007 SN - 0040-4039 SN - 1873-3581 VL - 48 IS - 7 SP - 1233 EP - 1235 PB - Elsevier CY - Amsterdam AN - OPUS4-14476 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Malow, Marcus A1 - Krause, Ulrich A1 - Neumann, F. T1 - Untersuchung des Verhaltens von Steinkohlen unter dem Gesichtspunkt des Ex-Schutzes N2 - Die Kenntnis des Brenn- und Explosionsverhaltens von Stäuben ermöglicht die Festlegung geeig-neter Explosionsschutzmaßnahmen. Am Beispiel von Steinkohle- Mahlanlagen werden Untersu-chungen zur Bestimmung sicherheitstechnischer Kenngrößen (STK) von Stäuben vorgestellt. Hier-bei erfolgt zunächst die auf den Anwendungsfall abgestimmte Auswahl geeigneter Untersuchungs-verfahren und deren Anpassung an vorliegende Randbedingungen. Aufbauend auf die gewonnenen Erkenntnisse werden Schlussfolgerungen für den sicheren Betrieb von Steinkohle- Mahlanlagen getroffen. T2 - VGB-Konferenz "Kraftwerke im Wettbewerb 2007, Neue Kraftwerke - mit Erfahrung und Innovation die Zukunft gestalten" CY - Hamburg, Deutschland DA - 2007-04-25 KW - Explosionsschutz KW - Steinkohle KW - Mahlanlagen KW - Selbstentzündung PY - 2007 IS - CD-ROM SP - 15 Seiten PB - VGB PowerTech e.V. CY - Hamburg AN - OPUS4-14785 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ferrero, Fabio A1 - Malow, Marcus A1 - Schmidt, Martin A1 - Krause, Ulrich ED - Thomas Böllinghaus, ED - Masaki Kitagawa, ED - Teruo Kishi, ED - Jürgen Lexow, T1 - Computational modelling of the self-ignition process to achieve safe storage of biomass T2 - 1st World Materials Research Institutes Forum (WMRIF) - Workshop for young materials scientists CY - Tsukuba, Ibaraki, Japan DA - 2008-07-22 KW - Self-ignition KW - Fire prevention KW - Storage KW - Biomass KW - Bulk materials PY - 2008 SN - 978-4-9900563-3-9 SP - XXII 1 EP - 16 CY - Tsukuba, Ibaraki, Japan AN - OPUS4-17861 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter T1 - Prediction of the self-accelerating decomposition temperature (SADT) for liquid organic peroxides from differential scanning calorimetry (DSC) measurements N2 - We present a prediction (estimation, calculation, screening) method for the estimation of the self-accelerating decomposition temperature (SADT) for liquid organic peroxides from differential scanning calorimetry (DSC) measurements based on the concepts of thermal explosion theory originally introduced by Semonov which are adopted to our problem assuming nth-order reaction kinetics. For the peroxides under investigation, we demonstrate good agreement with the experimental SADT. This method can be used as a quick and easy applicable method for the estimation of the critical temperatures. KW - Organic peroxides KW - Differential scanning calorimetry (DSC) KW - Self-accelerating decomposition temperature (SADT) PY - 2005 U6 - https://doi.org/10.1016/j.jhazmat.2004.12.040 SN - 0304-3894 VL - 120 IS - 1-3 SP - 21 EP - 24 PB - Elsevier CY - Amsterdam AN - OPUS4-7308 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ferrero, Fabio A1 - Lohrer, Christian A1 - Schmidt, Bernd A1 - Noll, Matthias A1 - Malow, Marcus T1 - A mathematical model to predict the heating-up of large-scale wood piles N2 - A mathematical model to predict the heating-up in open air wood chip piles has been developed. This model includes the heat production from chemical, physical and microbial exothermal processes. In the manuscript the laboratory experiments needed to develop and validate the model are described. In addition, temperature and gas concentrations were measured in two large-scale wood piles (volumes bigger than 1000 m³), in order to provide the applicability of the model to large-scale scenarios. The predictions of the model and the large-scale experimental data showed good agreement concerning the maximum temperature reached inside an open air wood pile. Special attention has been devoted to the microbial processes, since they proved to be the most important cause of heat production in the early stages of storage. This work is intended to help in predicting and thus avoiding possible self-ignition scenarios for this type of wood storage. KW - Wood chips KW - Storage KW - Self-ignition KW - Numerical simulation KW - Large-scale piles KW - Biomass PY - 2009 U6 - https://doi.org/10.1016/j.jlp.2009.02.009 SN - 0950-4230 SN - 1873-3352 VL - 22 SP - 450 EP - 459 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-19200 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Michael-Schulz, Heike A1 - Wehrstedt, Klaus-Dieter T1 - Evaluative comparison of two methods for sadt determination (UN H.1 and H.4) T2 - 12th Annual Symposium, Mary Kay O'Connor Process Safety Center "Beyond Regulatory Compliance: Making Safety Second Nature" Texas A&M University CY - College Station, TX, USA DA - 2009-10-27 PY - 2009 AN - OPUS4-20232 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter T1 - Sind DSC Experimente geeignet, um die thermische Stabilität von Dilauroylperoxid vorherzusagen? T2 - 10. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Germany DA - 2010-11-04 PY - 2010 AN - OPUS4-22369 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter T1 - Comments on "Thermal explosion and runaway reaction simulation of lauroyl peroxide by DSC tests, by Mei-Li You, Ming-Yang Liu, Sheng-Hung Wu, Jen-Hao Chi, Chi-Min Shu" (Journal of Thermal Analysis and Calorimetry, 2009;96:777-782) KW - Lauroyl peroxide KW - Thermal analysis KW - DSC KW - Kinetics PY - 2009 U6 - https://doi.org/10.1007/s10973-009-0534-1 SN - 1388-6150 SN - 1418-2874 SN - 0368-4466 SN - 1572-8943 VL - 98 IS - 3 SP - 885 EP - 886 PB - Kluwer Academic Publ. CY - Dordrecht AN - OPUS4-20791 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Malow, Marcus A1 - Ferrero, Fabio A1 - Noll, Matthias ED - Mahammadzadeh, M. ED - Biebeler, H. ED - Bardt, H. T1 - Brandvermeidung bei der Lagerung von Biomasse KW - Brandvermeidung KW - Selbstentzündung KW - Biomasse PY - 2009 SN - 978-3-602-14847-9 IS - Kap. 13 SP - 107 EP - 114 CY - Köln AN - OPUS4-20811 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wehrstedt, Klaus-Dieter A1 - Malow, Marcus T1 - Letter to the Editor - Comments on the "Letter to the editor" by M.-L. You and C.-M. Shu (Journal of Thermal Analysis and Calorimetry, 2010;100:367-369) as response to the "Letter to the editor" by M. Malow and K.-D. Wehrstedt (Journal of Thermal Analysis and Calorimetry, 2009;98:885-886) KW - Dilauroyl peroxide KW - Oxygen balance KW - DSC KW - Simulation KW - SADT PY - 2011 U6 - https://doi.org/10.1007/s10973-010-1122-0 SN - 1388-6150 SN - 1418-2874 SN - 0368-4466 SN - 1572-8943 VL - 103 IS - 1 SP - 409 EP - 410 PB - Kluwer Academic Publ. CY - Dordrecht AN - OPUS4-23210 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ferrero, Fabio A1 - Malow, Marcus A1 - Noll, Matthias T1 - Temperature and gas evolution during large scale outside storage of wood chips N2 - The temperature and gas concentrations in a newly established pine-wood debris pile of 20 m × 15 m × 6 m in dimensions (approximately 400 tons of fresh weight material) were monitored for 150 days. Temperature was measured at ten different positions within the pile, while concentrations of CO2, O2, CO and CH4 were taken at four different representative locations. The pile was characterized by a strong temperature increase within the first 10– 12 days of storage. Results of the gas analysis in this period suggest that the temperature increase was caused by microbial processes. In particular, reduced oxygen concentration and almost complete absence of methane indicate mainly aerobic respiration processes. Effects of weather conditions on the temperature/gas distribution and time evolution are also discussed in the paper. KW - Wood KW - Storage KW - Temperature KW - Gas concentration PY - 2011 U6 - https://doi.org/10.1007/s00107-010-0512-0 SN - 0018-3768 VL - 69 IS - 4 SP - 587 EP - 595 PB - Springer CY - Berlin ; Heidelberg AN - OPUS4-23849 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Rosenberg, Marika A1 - Michael-Schulz, Heike A1 - Wehrstedt, Klaus-Dieter T1 - Validation of the UN Test Method N.5 T2 - Mary Kay O`Connor Process Safety Center Symposium 2012 CY - College Station, TX, USA DA - 2012-10-23 PY - 2012 AN - OPUS4-26620 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosenberg, Marika A1 - Michael-Schulz, Heike A1 - Wehrstedt, Klaus-Dieter A1 - Malow, Marcus T1 - Validation of the UN test method N.5 T2 - 15th Annual symposium, Mary Kay O'Connor process safety center CY - College Station, TX, USA DA - 2012-10-23 KW - UN test N.5 KW - Water-reactive substance KW - Flammable gas PY - 2012 SN - 978-0-615-53719-1 SP - 826 EP - 835 AN - OPUS4-26898 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Rosenberg, Marika A1 - Michael-Schulz, Heike A1 - Wehrstedt, Klaus-Dieter T1 - Validierung der UN Test Methode N.5 zur Klassifizierung von Stoffen die bei Kontakt mit Wasser brennbare Gase entwickeln T2 - ProcessNet-Jahrestagung 2012 CY - Karlsruhe, Germany DA - 2012-09-10 PY - 2012 AN - OPUS4-26483 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lüth, Peter A1 - Uhlig, S. A1 - Frost, K. A1 - Malow, Marcus A1 - Michael-Schulz, Heike A1 - Schmidt, Martin A1 - Zakel, Sabine T1 - CEQAT-DGHS interlaboratory tests for chemical safety: Validation of laboratory test methods by determining the measurement uncertainty and probability of incorrect classification including so-called “Shark profiles” N2 - Laboratory test results are of vital importance for correctly classifying and labelling chemicals as “hazardous” as defined in the UN Globally Harmonized System (GHS) / EC CLP Regulation or as “dangerous goods” as defined in the UN Recommendations on the Transport of Dangerous Goods. Interlaboratory tests play a decisive role in assessing the reliability of laboratory test results. Interlaboratory tests performed over the last 10 years have examined different laboratory test methods. After analysing the results of these interlaboratory tests, the following conclusions can be drawn: 1. There is a need for improvement and validation for all laboratory test methods examined. 2. To avoid any discrepancy concerning the classification and labelling of chemicals, the use of validated laboratory test methods should be state of the art, with the results accompanied by the measurement uncertainty and (if applicable) the probability of incorrect classification. This paper addresses the probability of correct/incorrect classification (for example, as dangerous goods) on the basis of the measurement deviation obtained from interlaboratory tests performed by the Centre for quality assurance for testing of dangerous goods and hazardous substances (CEQAT-DGHS) to validate laboratory test methods. This paper outlines typical results (e.g. so-called “Shark profiles” – the probability of incorrect classification as a function of the true value estimated from interlaboratory test data) as well as general conclusions and steps to be taken to guarantee that laboratory test results are fit for purpose and of high quality. T2 - 13th International Symposium on Hazards, Prevention and Mitigation of Industrial Explosions (ISHPMIE 2020) CY - Brunswick, Germany DA - 27.07.2020 KW - Dangerous goods KW - Hazardous substances KW - Interlaboratory test KW - Test method KW - Validation KW - Quality assurance KW - Measurement uncertainty KW - Incorrect classification KW - Shark profiles PY - 2021 U6 - https://doi.org/10.1016/j.jlp.2021.104532 SN - 0950-4230/ VL - 72 SP - 104532 PB - Elsevier Ltd. AN - OPUS4-52751 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Michael-Schulz, Heike T1 - RRT O.2/O.3 – Results of BAM N2 - During the last couple of years BAM took part in different Round Robin Tests for the determination of oxidative properties of liquid and solid substances. The obtained results from these tests are reviewed and discussed in this presentation. New findings from recent particle size distribution measurements were discussed as well. N2 - Über die letzten Jahre hat die BAM an verschiedenen Round Robin Tests zur Bestimmung der oxidativen Eigenschaften von flüssigen und festen Stoffen teilgenommen. Die Ergebnisse werden diskutiert sowie zusätzliche Messungen zur Bestimmung der Partikelgrößenverteilung der verwendeten Cellulosen vorgestellt. T2 - IGUS EOS Meeting CY - Basel, Switzerland DA - 11.04.2016 KW - O.2 Test PY - 2016 AN - OPUS4-37191 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Manolov, Manol T1 - Thermische Zersetzung von AIBN – Experimente und Simulationen zur Bestimmung der SADT N2 - Die thermische Zersetzung von AIBN wurde in einem Projekt mit mehreren Teilnehmern untersucht. Hierbei wurde die selbstbeschleunigende Zersetzungstemperatur (SADT) sowohl experimentell als auch auf Grundlage von Simulationsrechnungen bestimmt. Die Besonderheit bei dem Feststoff AIBN ist, dass die Zersetzung sowohl in der festen, als auch in der flüssigen Phase nach dem Schmelzen stattfindet, was bei den durchgeführten Simulationsrechnungen berücksichtigt werden musste. Die berechneten SADT-Werte stimmen mit den experimentell bestimmten sehr gut überein. T2 - 14. BAM-PTB-Kolloquium zur chemischen und physikjalischen Sicherheitstechnik CY - Berlin, Germany DA - 14.06.2016 KW - SADT KW - Reaktionskinetik KW - AIBN KW - DSC KW - UN-Test H.1 KW - UN-Test H.4 PY - 2016 AN - OPUS4-37256 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Salg, Steffen A1 - Malow, Marcus A1 - Michael-Schulz, Heike A1 - Schomäcker, R. T1 - Evaluation of deflagration behaviour using different sized autoclaves N2 - Deflagration tests were conducted with two kinds of autoclaves. Parameter studies were carried out concerning the gas atmosphere and substances used. Deflagration tests were performed in different pressure regions. Furthermore, deflagration test results of different substances were compared to the corresponding DSC results. Previous findings concerning vacuum conditions could be approved for a greater range of substances. In addition, investigations in nitrogen atmosphere were performed in order to investigate the deflagration behaviour. Experiments up to 161 bar could be utilized. An acceleration of deflagration velocity with increasing pressure was observed in a large pressure interval. T2 - 15th International Symposium of Loss Prevention and Safety Promotion CY - Freiburg, Germany DA - 05.06.2016 KW - Deflagration KW - Closed Vessel KW - Autoclave KW - Effect of Pressure PY - 2016 SN - 978-88-95608-39-6 U6 - https://doi.org/10.3303/CET1648033 SN - 2283-9216 VL - 48 SP - 193 EP - 198 PB - Associazione Italiana di Ingegneria Chimica CY - Milano AN - OPUS4-37259 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Manolov, Manol T1 - Determination and simulation of SADT for packages, IBCs and tanks N2 - Die Konzepte zur Bestimmung der SADT für verschiedene Transportgebindegrößen werden an drei Beispielen aus der Praxis erläutert. Insbesondere wird auf die Problematik der Bestimmung der SADT für große Tranportgebinde eingegangen. Verschiedene Simulationsmethoden für die Berechnung der SADT werden vorgestellt. T2 - IGUS EOS/EPP Joint Meeting CY - Basle, Switzerland DA - 13.04.2016 KW - SADT KW - Test series H KW - Test series 8 PY - 2016 AN - OPUS4-36848 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Schuurman, P. A1 - Hoeijmakers, P.M.M. T1 - Comments on 'thermal decomposition kinetic evaluation and its thermal hazards prediction of AIBN, by S. Guo, W. Wan, C. Chen and W.H. Chen' (Journal of thermal analysis and calorimetry (2013) 113:1169-1176, DOI 10.1007/s10973-013-2993-7) N2 - We read the paper by Guo et al. [1] with interest. The authors have investigated the thermal decomposition kinetics and thermal hazards of 2,2′-azobis(isobutyronitrile), AIBN, by differential scanning calorimetry (DSC) and used the Advanced Kinetics and Technology Solutions (AKTS) software to predict the thermal stability of AIBN in ton and kg scale. The main conclusion of interest is that the self-accelerating decomposition temperature (SADT) of a 50-kg standard package is 63 °C. PY - 2014 U6 - https://doi.org/10.1007/s10973-014-3897-x SN - 1388-6150 SN - 1418-2874 SN - 0368-4466 SN - 1572-8943 VL - 117 IS - 3 SP - 1015 EP - 1016 PB - Kluwer Academic Publ. CY - Dordrecht AN - OPUS4-31251 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krause, G. A1 - Wehrstedt, Klaus-Dieter A1 - Malow, Marcus A1 - Budde, K. A1 - Mosler, J. T1 - Safe transport of acrylic acid in railroad tank cars. Part 1: Determination of the self-accelerating decomposition temperature N2 - Experiments according to a test specified in the UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria, and numerical simulations by means of a finite element method are employed to determine the self-accelerating decomposition temperature of acrylic acid in a railroad tank car. The results demonstrate that the transport of acrylic acid in big tank cars is safe as long as some basic conditions are taken into account. KW - Acrylic acid KW - Dangerous goods KW - Finite element method KW - Railway transport KW - Self-accelerating decomposition temperature PY - 2014 U6 - https://doi.org/10.1002/ceat.201300778 SN - 0930-7516 SN - 1521-4125 VL - 37 IS - 9 SP - 1460 EP - 1467 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-31298 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Michael-Schulz, Heike T1 - BAM H.1 and H.4 test results on AIBN T2 - IGUS EOS Meeting CY - Nanjing, China DA - 2014-04-09 PY - 2014 AN - OPUS4-30553 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Michael-Schulz, Heike T1 - UN-Test N.5 also for toxic substances? T2 - Ad hoc EOS Meeting CY - Frankfurt am Main, Germany DA - 2014-01-28 PY - 2014 AN - OPUS4-30258 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Michael-Schulz, Heike T1 - UN-Test O.2: Replacement of cellulose T2 - Ad hoc EOS Meeting CY - Frankfurt am Main, Germany DA - 2014-01-28 PY - 2014 AN - OPUS4-30259 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Berger, Anka T1 - Polymerizing substances - some problems concerning classification for transport T2 - Ad hoc EOS Meeting CY - Frankfurt am Main, Germany DA - 2014-01-28 PY - 2014 AN - OPUS4-30261 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Michael-Schulz, Heike T1 - UN Test Series H - a comparison T2 - Ad hoc EOS Meeting CY - Frankfurt am Main, Germany DA - 2014-01-28 PY - 2014 AN - OPUS4-30257 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rosenberg, Marika A1 - Michael-Schulz, Heike A1 - Wehrstedt, Klaus-Dieter A1 - Malow, Marcus T1 - Validation of the UN test method N.5 N2 - Many substances react with water in such a way that flammable gases are formed. For transport issues this reaction may possess a considerable hazard especially if the cargo is wetted by rain or by water from other sources. In the UN Recommendations on the Transport of Dangerous Goods these kinds of problems are addressed. The UN test N.5 'Test method for substances which in contact with water emit flammable gases' corresponds to this hazard. Classification according to the test method is done by measurement of the gas evolution rate of the flammable gas by any suitable procedure. At BAM a gravimetric approach is used to measure the gas evolution rate. In this paper we present the evaluation of the apparatus by means of an absolute calibration routine utilizing a reaction where a known amount of gas is produced as well as the evaluation of important parameters influencing the gas evolution rate using different substances. It can be shown that the apparatus is capable of measuring absolute gas volumes as low as 6 mL with an acceptable error of about 17% as determined from the reaction of Mg with demineralized water. KW - UN test N.5 KW - Water reactive substance KW - Flammable gas KW - Magnesium KW - Aluminum KW - Hydrogen PY - 2014 U6 - https://doi.org/10.1016/j.jlp.2014.03.008 SN - 0950-4230 SN - 1873-3352 VL - 30 SP - 282 EP - 286 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-31037 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ferrero, Fabio A1 - Malow, Marcus A1 - Berger, Anka A1 - Noll, Matthias T1 - Brandvermeidung bei der Lagerung von biogenen Brennstoffen am Beispiel von Kiefernholz T2 - Experten Workshop "Lagerung von Holzhackschnitzeln" CY - Potsdam-Bornim, Deutschland DA - 2008-06-18 KW - Selbstentzündung KW - Brandverhütung KW - Lagerung KW - Biomasse KW - Schüttgüter PY - 2008 SN - 0947-7314 IS - 63 SP - 32 EP - 44 CY - Potsdam AN - OPUS4-19043 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Noll, Matthias A1 - Naumann, Annette A1 - Ferrero, Fabio A1 - Malow, Marcus T1 - Exothermic processes in industrial-scale piles of chipped pine-wood are linked to shifts in gamma-, alphaproteobacterial and fungal ascomycete communities N2 - Fast growing softwood species such as pine are preferred for biomass-based heat as well as electricity production and stored in large quantities. A newly established outdoor pile of freshly cut pine-wood chips was monitored to analyze exothermic processes. Inside the pile, a mean temperature increase of up to 44 °C was measured after six days of piling which was paralleled by a decrease of O2-concentration and an increase of CO2-concentration. Thereafter four additional CO2 maxima were observed, while O2-concentration remained at ambient concentration. The fungal community structure remained almost unchanged after four weeks, while the bacterial community structure was characterized by continuous shifts over time. The rapid heating in the early stage of storage corresponded to high relative abundance of microbial strains belonging to the genera Pseudomonas, Luteibacter and Caulobacter, ascomycetous genera Sphaeropsis and Cadophora and basidiomycetous order Polyporales and genus Sistotremastrum. The late stage was composed by a broader diversity of microorganisms, and heating processes inside the wood pile were attributed mainly to physicochemical processes. Taken together, these observations suggest that the early bacterial and fungal communities are key players in exothermic processes and were replaced by a broader diversity of highly adapted microorganisms. KW - 16S rRNA gene KW - Bacteria KW - Fungi KW - Pine-wood storage KW - T-RFLP KW - Self-heating KW - Succession KW - ITS PY - 2010 U6 - https://doi.org/10.1016/j.ibiod.2010.07.002 SN - 0964-8305 VL - 64 IS - 7 SP - 629 EP - 637 PB - Elsevier CY - Barking AN - OPUS4-22013 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wehrstedt, Klaus-Dieter A1 - Adams, W. D. A1 - Mak, W. A1 - Malow, Marcus A1 - Kumasaki, M. T1 - Report about the IGUS EOS meeting 2010 in Tokyo KW - IGUS KW - EOS KW - Organic peroxides KW - Self-reactive substances KW - Energetic materials KW - Test methods KW - Oxidizers KW - Ammonium nitrate KW - Fertilizers PY - 2010 SN - 0570-4480 N1 - Sprachen: Japanisch/Englisch - Languages: Japanese/English VL - 49 IS - 4 SP - 240 EP - 243 CY - Tokyo, Japan AN - OPUS4-21942 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Martin A1 - Ferrero, Fabio A1 - Malow, Marcus A1 - Krause, Ulrich T1 - Vermeidung der Brandentstehung bei der Lagerung von Biomasse T2 - VDI-Fachtagung - Sichere Handhabung brennbarer Stäube CY - Nürnberg, Deutschland DA - 2010-11-16 KW - Selbstentzündung KW - Biomasse KW - Numerische Simulation KW - Brandvermeidung PY - 2010 SN - 978-3-18-092096-2 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 2096 SP - 87 EP - 98 AN - OPUS4-22501 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Michael-Schulz, Heike A1 - Wehrstedt, Klaus-Dieter T1 - Evaluative comparison of two methods for SADT determination (UN H.1 and H.4) N2 - We present our results on the comparison of two methods for the SADT determination. Both methods, UN test H.1 and UN test H.4 are recommended by the international transport regulations from the UN. But during the last years the applicability of the UN test H.4 has been questioned for solid substances. Therefore, three organic peroxides and one self-reactive substance have been investigated in 5 kg and 20 kg packages as well as in the UN test H.4 in a 500 mL Dewar vessel. The SADT values determined with the different methods match. The UN test H.4 seems to be well suited for solid organic peroxides and self-reactive substances of at least 20 kg or 60 L. KW - Thermal explosion KW - Organic peroxides KW - Self-reactive substances KW - SADT KW - Heat accumulation storage test KW - US SADT test PY - 2010 U6 - https://doi.org/10.1016/j.jlp.2010.06.014 SN - 0950-4230 SN - 1873-3352 VL - 23 IS - 6 SP - 740 EP - 744 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-22640 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Michael-Schulz, Heike T1 - Problems with formulations containing sodium carbonate peroxyhyrate T2 - IGUS EOS Meeting CY - Washington, D.C., USA DA - 2011-04-27 PY - 2011 AN - OPUS4-23648 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Rosenberg, Marika A1 - Michael-Schulz, Heike T1 - Validation of the UN test method N.5 T2 - IGUS EOS Meeting CY - Washington, D.C., USA DA - 2011-04-27 PY - 2011 AN - OPUS4-23643 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Michael-Schulz, Heike T1 - Simulated 50 kg package for SADT testing T2 - IGUS EOS Meeting CY - Washington, D.C., USA DA - 2011-04-27 PY - 2011 AN - OPUS4-23647 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Noll, Matthias A1 - Ferrero, Fabio A1 - Naumann, Annette A1 - Malow, Marcus T1 - Entwicklung von pilzlichen und bakteriellen Lebensgemeinschaften in einer Kiefernholzhalde N2 - Das Interesse für erneuerbare Energieträger ist in den letzten Jahren stark angestiegen. Im Bereich Biomasse als erneuerbarer Energieträger wird besonders Holz ein großes Wachstum auf dem Energiesektor prognostiziert (NITSCH 2007). Die Speicherung dieser Energie erfolgt meist durch Holzhackschnitzelhalden in der Umwelt. Um ein tieferes Verständnis der in der Halde ablaufenden mikrobiologischen Prozesse erhalten zu können, wurden in einer neu aufgebauten Kiefernholzhackschnitzelhalde mit den Ausmaßen 15 m x 20 m x 6 m folgende Messungen durchgeführt: a.) Messung der Gaskonzentration von Sauerstoff, Kohlendioxid als auch der Temperaturentwicklung innerhalb der Halde; b.) Messung der Veränderung der Holzzusammensetzung innerhalb der Halde über die Zeit; c.) Charakterisierung der Veränderung der Zusammensetzung der bakteriellen als auch der pilzlichen Lebensgemeinschaften über die Zeit; d.) Charakterisierung von dominanten Vertretern der bakteriellen als auch der pilzlichen Lebensgemeinschaften. Die Ergebnisse zeigen, dass sich die Funktion und die Zusammensetzung der Lebensgemeinschaften über die Dauer der Holzhackschnitzellagerung ändern, und dass diese Änderungen nur zum Teil mit den Prozessen bei Kompostierungsanlagen vergleichbar sind. T2 - Experten Workshop "Lagerung von Holzhackschnitzeln" CY - Potsdam-Bornim, Deutschland DA - 2008-06-18 KW - Ascoymceten KW - Pseudomonas KW - Bakterien KW - Pilze KW - Temperatur KW - Pilzliche und bakterielle Lebensgemeinschaften PY - 2008 SN - 0947-7314 IS - 63 SP - 58 EP - 72 CY - Potsdam AN - OPUS4-18645 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Michael-Schulz, Heike T1 - UN test H.1 - some new experimental results T2 - IGUS Energetic and Oxidising Substances (EOS) Working Group Meeting CY - Saint Petersburg, Russia DA - 2009-06-10 PY - 2009 AN - OPUS4-19500 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Michael-Schulz, Heike A1 - Wehrstedt, Klaus-Dieter T1 - Evaluative comparison of two methods for SADT determination (UN H.1 and H.4) N2 - We present our results on the comparsion of two methods for the SADT determination. Both methods, UN test H.1 and UN test H.4 are recommended by the international transport regulations from the UN. But during the last years the applicability of the UN test H.4 has been questioned for solid substances. Therefore, three organic peroxidesand one self-reactive substance have been investigated in 5 kg and 20 kg packages as well as in the UN test H.4 in a 500 mL dewar vessel. The SADT values determined with the different methods match. The UN test H.4 seems to be well suited also for solid substances at least for 20 kg or 60 L. T2 - 12th Annual symposium, Mary Kay O´Connor Process Safety Center "Beyond regulatory compliance: making safety second nature" CY - College Station, Texas, USA DA - 2009-10-27 KW - Thermal explosion KW - Organic peroxides KW - Self-reactive substances KW - SADT KW - Heat accumulation storage test KW - US SADT test PY - 2009 SN - 978-0-692-00459-3 IS - Chapter "Explosion - I" SP - 230 EP - 237 AN - OPUS4-20277 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Lüth, Peter A1 - Michael-Schulz, Heike A1 - Brandes, E. A1 - Uhlig, S. T1 - Center for quality assurance for testing of dangerous goods and hazardous substances - Brief information about status and activities T2 - IGUS ENERGETIC AND OXIDISING SUBSTANCES WORKING GROUP CY - Tokyo, Japan DA - 2010-05-26 PY - 2010 AN - OPUS4-21344 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Michael-Schulz, Heike T1 - Problems encountered comparing UN-Test H.2 und UN-Test H.4 results T2 - IGUS Energetic and Oxidising Substances (EOS) Working Group Meeting CY - Tokyo, Japan DA - 2010-05-26 PY - 2010 AN - OPUS4-21361 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter T1 - DSC: Thermal stability of dilauroylperoxide T2 - IGUS Energetic and Oxidising Substances (EOS) Working Group Meeting CY - Tokyo, Japan DA - 2010-05-26 PY - 2010 AN - OPUS4-21362 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Michael-Schulz, Heike T1 - Modified Setup of 20-L-Sphere of Determination of Safety Characteristics of Nano Powders T2 - 17th CY - Tokyo, Japan DA - 2010-05-26 PY - 2010 AN - OPUS4-21364 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Salg, Steffen A1 - Wehrstedt, Klaus-Dieter A1 - Michael-Schulz, Heike A1 - Malow, Marcus A1 - Schomäcker, R. T1 - Die Deflagration von Azodicarbonamid unter verschiedenen Umgebungsbedingungen N2 - Azodicarbonamid (ADCA) ist ein bekanntermaßen deflagrationsfähiger Stoff, der in der Kunststoffindustrie als Treib- und Blähmittel eingesetzt wird. In diesem Beitrag wird die Deflagration von ADCA unter verschiedenen Bedingungen betrachtet. Es werden Ergebnisse von Experimenten in offenen und geschlossenen Systemen präsentiert. In geschlossenen Systemen wurde die Zusammensetzung der umgebenden Atmosphäre von Luft mit Umgebungsdruck über Luft mit Unter- und Überdruck hin zu Stickstoff mit Umgebungsdruck variiert. Um das Deflagrationsrisiko zu reduzieren wird eine Verarbeitung von ADCA im Vakuum vorgeschlagen. T2 - 14. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Berlin, Germany DA - 14.06.2016 KW - Deflagration KW - geschlossene Behälterprüfung PY - 2016 SN - 978-3-9817853-5-7 SN - 0938-5533 SP - 118 EP - 125 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-37877 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Mishra, Kirti Bhushan A1 - Steinbach, J. T1 - Thermische Zersetzung von AIBN - Experimente und Simulationen zur Bestimmung der SADT N2 - Die thermische Zersetzung von AIBN wurde in einem Projekt mit mehreren Teilnehmern untersucht. Hierbei wurde die selbstbeschleunigende Zersetzungstemperatur SADT) sowohl experimentell als auf Grundlage von Simulationsrechnungen bestimmt. Die Besonderheit bei dem Feststoff AIBN ist, dass die Zersetzung sowohl in der festen, als auch in der flüssigen Phase nach dem Schmelzen stattfindet, was bei den durchgeführten Simulationsrechnungen berücksichtigt werden musste. Die berechneten SADT Werte stimmen mit den experimentell bestimmten sehr gut überein. T2 - 14. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Berlin, Germany DA - 14.06.2016 KW - SADT KW - Reaktionskinetik KW - AIBN KW - DSC KW - UN-Test H.1 KW - UN-Test H.4 PY - 2016 SN - 978-3-9817853-5-7 SN - 0938-5533 SP - 54 EP - 59 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-37878 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Michael-Schulz, Heike A1 - Duerrstein, St. A1 - Kappler, C A1 - Neuhaus, I. A1 - Gödde, M. T1 - Model-Based Prediction of the Adiabatic Induction Period and SADT of Dicumyl Peroxide Solution and Comparison to Large-Scale Experiments Performed Using 216.5-Liter Steel Drums in the UN-Test H.1 N2 - The thermal decomposition of dicumyl peroxide dissolved in ethylbenzene has been studied in our laboratories using differential scanning calorimetry (DSC), calvet calorimetry (C80), adiabatic calorimetry, reaction calorimetry and micro calorimetry. Based on the DSC and C80 experiments a formal kinetics model has been derived, which was compared to the other applied techniques. Finally we used our model to predict the thermal response of 216.5 L steel drums to exposure to constant elevated temperatures, both using the stationary Semenov approach as well as time-resolved CFD simulations. The prediction was compared to one-to-one testing using the UN-Test H.1. The observed level of consistency between model and experiments is remarkably good. The comparison with the 216.5 L testing clearly demonstrates that reliable and conservative predictions for technically relevant scales are possible as long as a validated model is used. T2 - 15th International Symposium of Loss Prevention and Safety Promotion in the Process Industries CY - Freiburg, Germany DA - 05.06.2016 KW - Thermal decomposition KW - Self-accelerating decomposition temperature KW - Dicumyl peroxide KW - CFD simulations KW - Real scale FST PY - 2016 SN - 978-88-95608-39-6 U6 - https://doi.org/10.3303/CET1648080 SN - 2283-9216 VL - 48 SP - 475 EP - 480 PB - AIDIC CY - Freiburg AN - OPUS4-37875 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Salg, Steffen A1 - Malow, Marcus A1 - Michael-Schulz, Heike A1 - Gebauer, Marek T1 - Experimentelle und theoretische Untersuchung des Zersetzungsmechanismus deflagrationsfähiger Substanzen N2 - Dieser Beitrag beschreibt Untersuchungen zu Deflagrationen von Azodicarbonamid, welche erstmals in einem Vier-Liter-Autoklaven durchgeführt wurden. Zunächst wird die Reproduzierbarkeit der Messungen mit der neuen Apparatur überprüft. Anschließend wird ein Vergleich mit Messungen in einer offenen Apparatur hergestellt, welche zur Prüfung der Deflagrationsfähigkeit in VDI 2263-1 erläutert ist. Zur Beschreibung der deflagrativen Zersetzungen werden die Kenngrößen Induktionszeit, Deflagrationsgeschwindigkeit, maximaler Druck, maximale und mittlere Druck- und Tempe-raturanstiegsrate herangezogen. Zusätzlich werden in weiteren Versuchen die während einer Deflagration entstehende Gasmenge und die Gasentwicklungsrate bestimmt. Abschließend werden die Druck- und Gasentwicklungsraten miteinander verglichen. Aus den Arbeiten lässt sich folgern, dass der Vier-Liter-Autoklav zur Bestimmung und Beschreibung der Deflagrationsfähigkeit von Azodicarbonamid gut geeignet ist und im Vergleich zu Messungen in offenen Prüfanordnungen eine Reihe von Vorteilen bietet. T2 - 4. Magdeburger Brand- und Explosionsschutztag / 3. vfdb-Workshop Brandschutzforschung CY - Magdeburg, Germany DA - 26.03.2015 KW - Deflagration KW - Geschlossener Behälter KW - Autoklav KW - Gas- und Druckmengenmessung PY - 2015 UR - http://www.iaut.ovgu.de/iaut_media/MBE/4_+MBE+2015/Beitr%C3%A4ge+2015/Salg_Experimentelle+und+theoretische+Untersuchung+des+Zersetzungsmechanismus+deflagrationsf%E2%80%9Ehiger+Substanzen.pdf SN - 978-3-00-048960-0 SP - 1 EP - 13 AN - OPUS4-33411 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Salg, Steffen A1 - Malow, Marcus A1 - Morhenn, H. ED - Pierucci, S. ED - Klemes, J.J. T1 - Investigations of deflagration in a four-litre-autoclave under atmospheric and non-atmospheric conditons N2 - A four-litre-autoclave was used to perform deflagration tests in a closed vessel. The aim was to investigate the suitability of this autoclave and to evaluate different parameters influencing the deflagration. The validation of test results showed that the autoclave is suited for the performance of deflagration tests. In comparison to tests performed in an open system according to VDI 2263-1 the results are in good agreement. In the closed vessel same characteristics as in the open test were determined. In addition, pressure rise and rate of pressure rise have been determined and used to characterise deflagrations. The influence of sample weight, tube diameter, bulk density, initial pressure and temperature was investigated. Furthermore, the emerging gas amount and the rate of gas evolution were determined and compared with pressure curves. The use of a four-litre-autoclave for performing deflagration tests offers several advantages in comparison to an open test. T2 - ICheaP12 - International conference on chemical & process engineering CY - Milan, Italy DA - 19.05.2015 KW - Deflagration KW - Closed vessel KW - Autoclave KW - Reduced pressure PY - 2015 UR - http://www.aidic.it/cet/15/43/344.pdf SN - 978-88-95608-34-1 U6 - https://doi.org/10.3303/CET1543344 SN - 2283-9216 N1 - Serientitel: Chemical engineering transactions (CEt) – Series title: Chemical engineering transactions (CEt) VL - 43 SP - 2059 EP - 2064 AN - OPUS4-33414 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Salg, Steffen A1 - Malow, Marcus A1 - Michael-Schulz, Heike T1 - Wie beeinflussen nicht-atmosphärische Bedingungen das Deflagrationsverhalten? N2 - Zur Bestimmung der Deflagrationsfähigkeit von energiereichen Stoffen/ Gemischen wurde zuletzt ein Vier-Liter-Autoklav vorgeschlagen, der im Vergleich zu den derzeit gängigen Prüfmethoden eine Reihe von Vorteilen bietet. In diesem Beitrag wird der Frage nachgegangen, wie nicht-atmosphärische Bedingungen das Deflagrationsverhalten beeinflussen. Zur Beantwortung dieser Frage wurden weitere Experimente im genannten Autoklaven und in einem kleineren Autoklaven durchgeführt. Im Wesentlichen lässt sich feststellen, dass der Druck im Probengefäß vor Versuchsbeginn, insbesondere reduzierter Ausgangsdruck < 1 bar Auswirkungen auf das Deflagrationsverhalten hat. Das Vorhandensein einer reinen Stickstoffatmosphäre hingegen, beeinflusst das Deflagrationsverhalten nicht. T2 - 12. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 05.11.2015 KW - Deflagration KW - Geschlossener Behälter KW - Autoklav KW - Nicht-atmosphärische Bedingungen PY - 2015 SN - 978-3-86011-091-1 SP - P12, 1 EP - 4 AN - OPUS4-34821 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Lüth, Peter A1 - Brandes, E. A1 - Frost, K. A1 - Kurth, Lutz A1 - Schmidt, Martin A1 - Michael-Schulz, Heike A1 - Uhlig, S. T1 - CEQAT-DGHS Interlaboratory test programme for chemical safety - status and activities N2 - Safety experts, carriers or traders must be able to rely on the validity of the method and on correct results of safety tests and assessments in the laboratory. Bundesanstalt für Materialforschung und –prüfung (BAM), Berlin and Physikalisch-Technischen Bundesanstalt (PTB), Braunschweig have extensive experience in the field of testing and assessment of physical hazards of chemicals. Interlaboratory tests on different test methods have been performed by BAM and PTB during the last 10 years. Significant differences between the results of the participating laboratories were observed in all interlaboratory test. The deviations of the test results were not caused only by laboratory faults but also by deficiencies of the test method; i.e. many of the method descriptions are too ambiguous and allow divergences for interpretation. Therefore, it is necessary to know exactly how good the method is that is used to classify dangerous goods or hazardous substances or to determine safety-relevant parameters. A key criterion is the measurement uncertainty. One can choose simple methods with large error limits, but the measurement uncer-tainties should be known and always communicated together with the test results. This would allow safety specialists to be able to assess test results correctly and make well-founded decisions, e.g. for adequate protective measures. Interlaboratory tests play a decisive role in assessing the reliability of test results. Participation in interlaboratory tests is not only a crucial element of the quality as-surance of laboratories; as such it is explicitly recommended in DIN EN ISO/IEC 17025. In addition, interlaboratory tests are also used to develop and validate test methods and can be used for the determination of the measurement uncertainty. Therefore, the BAM and PTB continue to support the further development of the interlaboratory test programme of CEQAT-DGHS (Centre for quality assurance for testing of dangerous goods and hazardous substances, www.ceqat-dghs.bam.de), established in 2007. This programme is run by BAM in collaboration with the PTB and the QuoData Gesellschaft für Qualitätsmanagement und Statistik mbH, Dresden. A new interlaboratory test for methods validation on the test method UN Test N.5 "Test method for substances which in contact with water emit flammable gases” is currently being prepared and will be carried out in 2018. Laboratories that specialise in this test are invited to participate in the interlaboratory test. Interested laboratories can check the details and register to participate in the interlaboratory test at the CEQAT-DGHS website. T2 - MEETINGS OF IGUS EOS GROUP CY - Shanghai, P.R. China DA - 09.04.2018 KW - Interlaboratory test KW - Dangereous goods KW - Hazardous substances KW - Test method KW - Validation PY - 2018 AN - OPUS4-44825 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lüth, Peter A1 - Malow, Marcus T1 - CEQAT-DGHS Interlaboratory tests for chemical safety – A new gravimetric procedure for the gas flow measurement for flammable and toxic gases N2 - Testing of hazardous materials and evaluating their hazardous properties concerning transport, handling or use is essential for the prevention of incidents. For this purpose, test methods have been developed and published that are used worldwide today (European Union, 2008, United Nations, 2019). For the evaluation of test results their correct measurement is of importance. On basis of the interlaboratory tests carried out by BAM and PTB within the framework of the CEQAT-DGHS in the last years, it is shown that there is a need for improvement in all the test methods examined so far. In addition to the interlaboratory tests further quality measures are mandatory (ISO, 2017). For example, methods for verifying the test equipment used in the laboratories should be developed. The development of a verification method is demonstrated using the test method UN Test N.5 as an example. This test method is used to evaluate substances which in contact with water emit flammable gases. The basic principle of the verification method is demonstrated by Lüth et al. (2019). Requirements and difficulties during this development are discussed. This test procedure UN Test N.5 has now been modified at BAM so that it is possible to measure very small or large amounts of both flammable and/or toxic gases over a long period of time in a validated and verified test apparatus, utilizing the principle of a gas collector. This allows us to determine slow as well as fast gas evolution rates. The determination of the evolution rates (e.g. total gas amount or flow rate) of toxic gases is of special interest because of the ongoing discussion how to evaluate and quantify toxic gases which are formed from a substance due to contact with water. Up today no validated test procedure for the measurement of evolution rates for toxic gases is described. It is shown that the newly modified test method could help to solve this problem. T2 - 13th International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions CY - Online meeting DA - 27.07.2020 KW - Hazardous materials KW - Transport regulations KW - Flammable gases KW - Toxic gases PY - 2020 SP - Paper 1002 AN - OPUS4-51271 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Léonard, Fabien A1 - Zhang, Zhen A1 - Malow, Marcus A1 - Bruno, Giovanni T1 - 3D characterisation of ammonium nitrate powders by X-ray computed tomography N2 - The mixture of ammonium nitrate (AN) prills and fuel oil (FO), usually called ANFO, is extensively used in the mining industry as a bulk industrial explosive. One of the major performance predictors of ANFO mixtures is the fuel oil retention, which is itself governed by the porosity of the AN prills. Standardised tests routinely used to assess oil retention face several important limitations; the first being the difficulty to cover the wide range of porosity contents and morphologies from different types of ammonium nitrate prills; the second being the inability to evaluate the closed porosity, which is an important factor regarding the sensitivity of the explosive to detonation. In this study, we present how X-ray computed tomography (XCT), and the associated advanced data processing workflow, can be used to fully characterise the structure and morphology of AN prills. We show that structural parameters such as volume fraction of the different phases and morphological parameters such as specific surface area and shape factor can be reliably extracted from the XCT data, and that there is a good agreement with the measured oil retention values. XCT can therefore be employed to non-destructively and accurately evaluate and characterise porosity in ammonium nitrate prills. T2 - 23rd Seminar on New Trends in Research of Energetic Materials CY - Meeting was canceled DA - 01.04.2020 KW - Ammonium nitrate KW - Prill KW - Non-destructive characterisation KW - Porosity KW - Specific surface area PY - 2020 SP - 163 EP - 171 AN - OPUS4-51272 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Salg, Steffen A1 - Michael-Schulz, Heike T1 - A new apparatus for the investigaton of deflagrations T2 - IGUS EOS meeting CY - Ottawa, Canada DA - 2015-05-06 PY - 2015 AN - OPUS4-33378 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Erdt, René A1 - Michael-Schulz, Heike A1 - Rudolph, Michael T1 - UN Test N.5 - new test results T2 - IGUS EOS meeting CY - Ottawa, Canada DA - 2015-05-06 PY - 2015 AN - OPUS4-33379 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Salg, Steffen A1 - Michael-Schulz, Heike T1 - Use of four-liter-autoclave for conducting deflagration tests T2 - New Trends in Reseach of Energetic Materials CY - Pardubice, the Czech Republic DA - 2015-04-15 PY - 2015 AN - OPUS4-33382 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Salg, Steffen A1 - Michael-Schulz, Heike A1 - Malow, Marcus T1 - Use of a four-liter-autoclave for conducting deflagration tests N2 - For the determination of deflagration capability of energetic substances, the test methods according to VDI 2263-1, part 1.6 and UN-Manual, C.1- und C.2-test are used. These methods are suited to evaluate the intrinsic material property deflagration. For evaluation of deflagration behavior in closed systems, for example in production sites, an appropriate test apparatus is missing. Because of this, the BAM Federal Institute for Materials Research and Testing developed a four-liter-autoclave for conducting the deflagration test under isochoric conditions. Deflagration behavior was evaluated under different parameters e. g. pressure and temperature. On the basis of results it can be seen, that the four-liter-autoclave is suited for the determination of deflagration behavior. On the one hand, the same characteristics as in the standard test methods are obtained. On the other hand, there are additional characteristics, like pressure rise and decomposition velocity. On the basis of pressure measurement, the emerging gas volume and the rate of gas evolution, that are used to design protection measures, can be estimated. The measurements are conducted with the deflagrating substance Azodicarboxamide (ADCA). It is concluded that the four-liter-autoclave is a good alternative for conducting deflagration tests. T2 - 18th Seminar on new trends in research of energetic materials - NTREM CY - Pardubice, Czech Republic DA - 15.04.2015 KW - Deflagration KW - Azodicarboxamide KW - Closed vessel KW - Pressure rise KW - Arising gases PY - 2015 UR - http://www.ntrem.com/download/NTREM_2015_abstracts.pdf SN - 978-80-7395-891-6 SN - 978-80-7395-892-3 SP - 255 EP - 264 AN - OPUS4-33490 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Salg, Steffen A1 - Malow, Marcus A1 - Morhenn, H. T1 - Experimentelle und theoretische Untersuchung des Zersetzungsmechanismus deflagrationsfähiger Substanzen N2 - In einem Vier-Liter-Autoklaven wurden erstmals Untersuchungen zu Deflagrationen von Azodicarbonamid durchgeführt. Aus den Arbeiten lässt sich folgern, dass der Vier-Liter-Autoklav zur Bestimmung und Beschreibung der Deflagrationsfähigkeit von Azodicarbonamid gut geeignet ist und im Vergleich zu Messungen inoffenen Prüfanordnungen eine Reihe von Vorteilen bietet. KW - Deflagration KW - Geschlossener Behälter KW - Autoklav KW - Gas- und Druckmengenmessung PY - 2015 SN - 2191-0073 VL - 5 IS - 6 SP - 39 EP - 44 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-33491 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Manolov, Manol T1 - Thermal decomposition of AIBN Part A: Decomposition in real scale packages and SADT determination N2 - In this paper the thermal decomposition of 2,2′-azobisisobutyronitrile (AIBN) was investigated in real scale packages of different sizes and in 500 mL Dewar vessels. Packages containing 5 kg, 20 kg and 50 kg of AIBN have been investigated according to the UN test H.1 method and the 500 mL Dewar experiments were performed according to the UN test H.4 method. The self-accelerating decomposition temperature (SADT) was determined for the different masses and for the 500 mL Dewar vessel. Additionally, DSC curves have been recorded in closed crucibles. All these experimental data are the basis of a series of forthcoming papers dealing with the simulation of the SADT for different masses using reliable kinetic data. PY - 2015 U6 - https://doi.org/10.1016/j.tca.2015.06.013 SN - 0040-6031 SN - 1872-762X VL - 621 SP - 1 EP - 5 PB - Elsevier B.V. CY - Amsterdam AN - OPUS4-35010 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Lüth, Peter T1 - CEQAT-DGHS Development of procedures for the verification of test apparatuses (Example UN Test N.5) N2 - This presentation focuses on General aspects of development of verification methods. The development of verification methods is demonstrated using the test method UN Test N.5 as an example. T2 - EOS IGUS Meeting CY - Brussels, Belgium DA - 21.05.2019 KW - Dangerous Goods KW - UN-Test N.5 KW - Verification method KW - Measurement uncertainty PY - 2019 AN - OPUS4-49003 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Knorr, Annett A1 - Jungnickel, Ralf T1 - Different methods for the determination of calcium peroxide N2 - The CaO2 Content ist analyzed using different titration methods. The results and the methods are compared. CaO2 is a reference material in the UN Test method O.3. T2 - EOS IGUS Meeting CY - Brussels, Belgium DA - 21.05.2019 KW - Dangerous Goods KW - UN-Test O.3 KW - Calcium peroxid KW - Content of calcium peroxide PY - 2019 AN - OPUS4-49001 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lüth, Peter A1 - Uhlig, S. A1 - Frost, K. A1 - Malow, Marcus A1 - Michael-Schulz, Heike A1 - Schmidt, Martin A1 - Zakel, S. T1 - CEQAT-DGHS interlaboratory tests for chemical safety: Validation of laboratory test methods by determining the measurement uncertainty and probability of incorrect classification including so-called “Shark profiles” N2 - Laboratory test results are of vital importance for correctly classifying and labelling chemicals as “hazardous” as defined in the UN Globally Harmonized System (GHS) / EC CLP Regulation or as “dangerous goods” as defined in the UN Recommendations on the Transport of Dangerous Goods. Interlaboratory tests play a decisive role in assessing the reliability of laboratory test results. Interlaboratory tests performed over the last 10 years have examined different laboratory test methods. After analysing the results of these interlaboratory tests, the following conclusions can be drawn: 1. There is a need for improvement and validation for all laboratory test methods examined. 2. To avoid any discrepancy concerning the classification and labelling of chemicals, the use of validated laboratory test methods should be state of the art, with the results accompanied by the measurement uncertainty and (if applicable) the probability of incorrect classification. This paper addresses the probability of correct/incorrect classification (for example, as dangerous goods) on the basis of the measurement deviation obtained from interlaboratory tests performed by the Centre for quality assurance for testing of dangerous goods and hazardous substances (CEQAT-DGHS) to validate laboratory test methods. This paper outlines typical results (e.g. so-called “Shark profiles” – the probability of incorrect classification as a function of the true value estimated from interlaboratory test data) as well as general conclusions and steps to be taken to guarantee that laboratory test results are fit for purpose and of high quality. T2 - 13th International Symposium on Hazards, Prevention and Mitigation of Industrial Explosions (ISHPMIE 2020) CY - Braunschweig, Germany DA - 27.07.2020 KW - Dangerous goods KW - Hazardous substances KW - Interlaboratory test KW - Test method KW - Validation KW - Quality assurance KW - Measurement uncertainty KW - Incorrect classification KW - Shark profile PY - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-515376 UR - https://oar.ptb.de/files/download/5f3e662f4c93901010006dbf VL - 2020 SP - 50 EP - 61 PB - Open Access Repository der Physikalisch-Technischen Bundesanstalt (PTB-OAR) CY - Braunschweig AN - OPUS4-51537 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lüth, Peter A1 - Frost, K. A1 - Kurth, Lutz A1 - Malow, Marcus A1 - Schmidt, Martin A1 - Michael-Schulz, Heike A1 - Uhlig, S. A1 - Zakel, S. T1 - CEQAT-DGHS Ringversuchsprogramm für die Chemikaliensicherheit - Schlussfolgerungen N2 - Die Ursachen für Chemikalienunfälle können vielfältig sein. Prävention beginnt bereits im Prüflabor, wenn Chemikalien auf ihre gefährlichen Eigenschaften getestet werden. Dazu sind Prüfmethoden entwickelt und veröffentlicht worden, die heute weltweit Anwendung finden. Auf die Validität der Prüfmethode und richtige Durchführung der Prüfung im Laboratorium müssen sich Sicherheitsfachkräfte, Transporteure oder Händler verlassen können. Anhand der in den letzten 10 Jahren im Rahmen des CEQAT-DGHS von BAM und PTB durchgeführten Ringversuche (RV) wird gezeigt, dass bei allen bisher untersuchten Prüfmethoden ein Verbesserungsbedarf besteht. Die RV müssen daher zunächst auf die Methodenverbesserung und -validierung abzielen und nicht auf Leistungstests. Das Labormanagement und die praktische Durchführung der Prüfung sind in vielen Laboratorien verbesserungsbedürftig. Der Begriff „Erfahrung der Prüfer“ ist kritisch zu sehen: Eine „lange Erfahrung mit vielen Prüfungen“ ist nicht unbedingt ein Garant für richtige Ergebnisse. T2 - 15. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Braunschweig, Germany DA - 21.05.2019 KW - Gefahrgut KW - Gefahrstoff KW - Ringversuch KW - Prüfmethode KW - Validierung KW - Qualitätssicherung PY - 2019 UR - https://www.ptb.de/cms/index.php?id=18763 U6 - https://doi.org/10.7795/210.20190521M SP - 1 EP - 8 PB - Physikalisch-Technische Bundesanstalt (PTB) CY - Braunschweig AN - OPUS4-49489 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lüth, Peter A1 - Frost, K. A1 - Kurth, Lutz A1 - Malow, Marcus A1 - Schmidt, Martin A1 - Michael-Schulz, Heike A1 - Uhlig, S. A1 - Zakel, S. T1 - CEQAT-DGHS Ringversuchsprogramm für die Chemikaliensicherheit – Entwicklung von Verfahren zur Verifizierung der Prüfapparatur am Beispiel der Prüfmethode UN Test N.5 N2 - Prävention beginnt im Prüflabor, wenn Chemikalien auf ihre gefährlichen Eigenschaften getestet werden. Dazu sind Prüfmethoden entwickelt und veröffentlicht worden, die heute weltweit Anwendung finden. Auf die Validität der Prüfmethode und richtige Durchführung der Prüfung im Laboratorium müssen sich Sicherheitsfachkräfte, Transporteure oder Händler verlassen können. Anhand der in den letzten 10 Jahren im Rahmen des CEQAT-DGHS von BAM und PTB durchgeführten Ringversuche (RV) wird gezeigt, dass bei allen bisher untersuchten Prüfmethoden ein Verbesserungsbedarf besteht. Die RV müssen daher zunächst auf die Methodenverbesserung und -validierung abzielen und nicht auf Leistungstests. Das Labormanagement und die praktische Durchführung der Prüfung sind in vielen Laboratorien verbesserungsbedürftig. Der Begriff „Erfahrung der Prüfer“ ist kritisch zu sehen: Eine „lange Erfahrung mit vielen Prüfungen“ ist nicht unbedingt ein Garant für richtige Ergebnisse. Bei der Prüfung der gefährlichen Eigenschaften von Chemikalien sind Referenzmaterialen auf Grund der Instabilität in der Regel nicht verfügbar. Für Prüflaboratorien sind RV daher eine Alternative bei der Qualitätssicherung. RV sind jedoch aufwendig und können nur in relativ großen Zeitabständen durchgeführt werden. Es sind deshalb Verfahren zur Verifizierung z. B. der in den Laboratorien verwendeten Prüfapparaturen zu entwickeln. Die Entwicklung von Verifizierungsverfahren wird am Bespiel der Prüfmethode UN Test N.5 demonstriert. T2 - 15. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Braunschweig, Germany DA - 21.05.2019 KW - Gefahrgut KW - Gefahrstoff KW - Ringversuch KW - Prüfmethode KW - Validierung KW - Qualitätssicherung KW - Verifizierung PY - 2019 UR - https://www.ptb.de/cms/index.php?id=18763 U6 - https://doi.org/10.7795/210.20190521E SP - 1 EP - 10 CY - Braunschweig AN - OPUS4-49495 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lüth, Peter A1 - Frost, K. A1 - Kurth, Lutz A1 - Malow, Marcus A1 - Michael-Schulz, Heike A1 - Schmidt, Martin A1 - Schulte, Petra A1 - Uhlig, S. A1 - Zakel, S. T1 - CEQAT-DGHS Interlaboratory Test Programme for Chemical Safety - Need of Test Methods Validation N2 - Safety experts, manufacturers, suppliers, importers, employers or consumers must be able to rely on the validity of safety-related test methods and on correct test results and assessments in the laboratory. Via the eChemPortal lots of data from the REACH registration dossiers are available. However, the quality and correctness of the information remains in the responsibility of the data submitter. Unfortunately, we found more or less appropriate information on physicochemical properties and concluded that more quality or adequacy of any data submitted will be needed. Interlaboratory tests play a decisive role in assessing the reliability of test results. Interlaboratory tests on different test methods have been performed by Bundesanstalt für Materialforschung und –prüfung (BAM) and Physikalisch-Technische Bundesanstalt (PTB) in collaboration with the QuoData GmbH during the last 10 years. Significant differences between the results of the participating laboratories were observed in all interlaboratory tests. The deviations of the test results were not caused only by laboratory faults but also by deficiencies of the test method. In view of the interlaboratory test results the following conclusions can be drawn: • To avoid any discrepancy on classification and labelling of chemicals it should become state of the art to use validated test methods and the results accompanied by the measurement uncertainty. • A need for improvement is demonstrated for all examined test methods. Thus, interlaboratory tests shall initially aim at the development, improvement and validation of the test methods and not on proficiency tests. • The laboratory management and the practical execution of the tests need to be improved in many laboratories. • The term "experience of the examiner" must be seen critically: A "long experience with many tests" is not necessarily a guarantee for correct results. T2 - 16th International Symposium on Loss Prevention and Safety Promotion in the Process Industries and accompanying exhibition. Loss prevention 2019 CY - Delft, The Netherlands DA - 16.06.2019 KW - Dangerous goods KW - Hazardous substances KW - Round robin test KW - Interlaboratory comparison KW - Test method KW - Validation KW - Quality assurance PY - 2019 UR - https://www.aidic.it/cet/19/77/001.pdf SN - 978-88-95608-74-7 U6 - https://doi.org/10.3303/CET1977001 SN - 2283-9216 VL - 77 SP - 1 EP - 6 PB - Italian Association of Chemical Engineering AN - OPUS4-49496 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus T1 - Notwendigkeiten und Möglichkeiten zur Verifizierung von Prüfapparaturen zur Bestimmung sicherheitstechnischer Kennzahlen N2 - Prüfapparaturen zur Bestimmung sicherheitstechnischer Kennzahlen müssen präzise messen, um verlässliche Ergebnisse zu produzieren. Oftmals gibt es in der Methodenbeschreibung allerdings keine Informationen zu Messunsicherheiten o.ä.. In dem Vortrag werden Ringversuchsprogramme das CEQAT-DGHS beschrieben und aktuelle Arbeiten zu Verifizierungsverfahren von Messmethoden beschrieben. T2 - 14. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 07.11.2019 KW - Gefahrgut KW - UN-Test N.5 KW - Verifizierung von Prüfapparaturen KW - Messunsicherheit PY - 2019 AN - OPUS4-50233 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krösche, C. A1 - Malow, Marcus A1 - Budde, K. T1 - False-Positive Results of UN Test O.2 Liquid Oxidizer Test of Polychlorosilanes N2 - According to UN Test O.2, surprisingly, the polychlorosilanes hexachlorodisilane (HCDS), octachlorotrisilane (OCTS) and decachlorotetrasilane (DCTS) formally fulfill the criteria of the “test for oxidizing liquids”. This result is in contrast to the properties of polychlorosilanes that are described in the literature and those we have experienced in our own production. By investigating the reaction products from the UN O.2 test reactor, using IR, Raman and XPS spectroscopy, it was shown that the results are not due to oxidizing properties of HCDS, OCTS or DCTS, but are caused by the specified test substance cellulose. To our knowledge, this is the very first substance class in which the reference substance oxidizes the test sample, instead of vice versa. This represents an important limitation of the internationally used UN Test O.2 for this substance class. The cause for this false-positive result is the known high degree of affinity of oxygen to silicon. It is shown that the correctly executed UN Test O.2 produces false-positive results and that the polychlorosilanes do not have an oxidizing effect and, therefore, do not have to be classified as “oxidizing substances”. KW - Polychlorosilanes KW - UN Test O.2 KW - Hexachlorodisilane KW - Octachlortrisilane KW - Decachlorotetrasilane KW - False-positive results PY - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-523989 VL - 70 SP - 104434 PB - Elsevier Ltd. AN - OPUS4-52398 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Michael-Schulz, Heike A1 - Salg, S. A1 - Schomäcker, R. T1 - Der Einfluss hohen Umgebungsdrucks auf Deflagrationen N2 - Das Deflagrationsverhalten von Feststoffen unter atmosphärischen Bedingungen wurde in der Vergangenheit eingehend untersucht. Standardmäßig wird die Deflagrationsprüfung in einem offenen System durchgeführt. Aber auch in geschlossenen Systemen ist die Deflagrationsprüfung durchführbar und sie liefert Ergebnisse, die mit den Standardmethoden vergleichbar sind. Darüber hinaus bietet die Prüfung in einem geschlossenen System den Vorteil, nicht nur die Temperatur, sondern auch den Druck messen und für die Beschreibung des Deflagrationsverlaufs heranziehen zu können. Auch für die Prüfung in geschlossenen Systemen liegt eine Reihe an experimentellen Ergebnissen vor. Von Klais wurde veröffentlicht, dass die Deflagrationsgeschwindigkeit, beschrieben anhand der Druckanstiegsrate, mit steigendem Druck ansteigt. Vor dem Hintergrund dieser experimentellen Beobachtung wurde interpretiert, dass die Steigerung der Geschwindigkeit ihre Ursache im steigenden Umgebungsdruck findet. Es wurde weiter versucht, einen funktionalen Zusammenhang zwischen Umgebungsdruck und Deflagrationsgeschwindigkeit, ausgedrückt durch die Druckanstiegsrate, herzustellen. Dabei wurde nicht beachtet, dass neben dem Umgebungsdruck noch andere Einflussfaktoren auf die Deflagrationsgeschwindigkeit gegeben sind. Wesentlich ist hierbei die für die Reaktion zur Verfügung stehende Oberfläche, die sich bei einer lokalen, punktförmigen Anzündung mit fortschreitender Reaktionszeit vergrößert. In diesem Beitrag wird der Einfluss des Umgebungsdrucks auf die Deflagrationsgeschwindigkeit systematisch untersucht. Zu diesem Zweck wurden Experimente bei verschiedenen Ausgangsdrücken bis zu 50 bar (abs) durchgeführt. Der Anfangsdruck, also der Druck der vor Beginn eines Experiments im Reaktionsraum herrscht, wurde schrittweise von einem Experiment zum nächsten erhöht. Für die Versuchsreihen wurden zwei Substanzen verwendet: Azodicarbonamid und ein Imidazolderivat. Diese unterscheiden sich in ihrem Deflagrationsverhalten und hinsichtlich der Gasmengenentwicklung. Die durchgeführten Experimente haben gezeigt, dass die Deflagrationsgeschwindigkeit mit steigendem Druck zunimmt. Sowohl die Druckanstiegsrate, als auch die lineare Ausbreitungsrate sind ein gutes Maß dafür. Zwischen den beiden Kenngrößen besteht ein linearer Zusammenhang. Für eine gegebene Geometrie lässt sich die eine Kenngröße aus der anderen berechnen. T2 - 5. Brand- und Explosionsschutztage 2017 CY - Magdeburg, Germany DA - 23.03.2017 KW - Deflagrationen KW - Geschlossenes System KW - Azodicarbonamid KW - Druckanstiegsrate KW - Deflagrationsgeschwindigkeit PY - 2017 SN - 978-3-00-056201-3 SP - 1 EP - 11 AN - OPUS4-39920 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Michael-Schulz, Heike A1 - Salg, Steffen A1 - Schomäcker, R. T1 - Der Einfluss hohen Umgebungsdrucks auf Deflagrationen N2 - Das Deflagrationsverhalten von Feststoffen unter atmosphärischen Bedingungen wurde in der Vergangenheit eingehend untersucht. Standardmäßig wird die Deflagrationsprüfung in einem offenen System durchgeführt. Aber auch in geschlossenen Systemen ist die Deflagrationsprüfung durchführbar und sie liefert Ergebnisse, die mit den Standardmethoden vergleichbar sind. Darüber hinaus bietet die Prüfung in einem geschlossenen System den Vorteil, nicht nur die Temperatur, sondern auch den Druck messen und für die Beschreibung des Deflagrationsverlaufs heranziehen zu können. Auch für die Prüfung in geschlossenen Systemen liegt eine Reihe an experimentellen Ergebnissen vor. Von Klais wurde veröffentlicht, dass die Deflagrationsgeschwindigkeit, beschrieben anhand der Druckanstiegsrate, mit steigendem Druck ansteigt. Vor dem Hintergrund dieser experimentellen Beobachtung wurde interpretiert, dass die Steigerung der Geschwindigkeit ihre Ursache im steigenden Umgebungsdruck findet. Es wurde weiter versucht, einen funktionalen Zusammenhang zwischen Umgebungsdruck und Deflagrationsgeschwindigkeit, ausgedrückt durch die Druckanstiegsrate, herzustellen. Dabei wurde nicht beachtet, dass neben dem Umgebungsdruck noch andere Einflussfaktoren auf die Deflagrationsgeschwindigkeit gegeben sind. Wesentlich ist hierbei die für die Reaktion zur Verfügung stehende Oberfläche, die sich bei einer lokalen, punktförmigen Anzündung mit fortschreitender Reaktionszeit vergrößert. In diesem Beitrag wird der Einfluss des Umgebungsdrucks auf die Deflagrationsgeschwindigkeit systematisch untersucht. Zu diesem Zweck wurden Experimente bei verschiedenen Ausgangsdrücken bis zu 50 bar (abs) durchgeführt. Der Anfangsdruck, also der Druck der vor Beginn eines Experiments im Reaktionsraum herrscht, wurde schrittweise von einem Experiment zum nächsten erhöht. Für die Versuchsreihen wurden zwei Substanzen verwendet: Azodicarbonamid und ein Imidazolderivat. Diese unterscheiden sich in ihrem Deflagrationsverhalten und hinsichtlich der Gasmengenentwicklung. Die durchgeführten Experimente haben gezeigt, dass die Deflagrationsgeschwindigkeit mit steigendem Druck zunimmt. Sowohl die Druckanstiegsrate, als auch die lineare Ausbreitungsrate sind ein gutes Maß dafür. Zwischen den beiden Kenngrößen besteht ein linearer Zusammenhang. Für eine gegebene Geometrie lässt sich die eine Kenngröße aus der anderen berechnen. T2 - 5. Brand- und Explosionsschutztage CY - Magdeburg, Germany DA - 23.03.2017 KW - Deflagrationen KW - Geschlossenes System KW - Azodicarbonamid KW - Druckanstiegsrate KW - Deflagrationsgeschwindigkeit PY - 2017 AN - OPUS4-39921 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Malow, Marcus A1 - Wehrstedt, Klaus-Dieter A1 - Michael-Schulz, Heike T1 - Suitable diluents for the group of desensitized explosives? N2 - The question, what is a suitable diluent for the group of desensitized explosives, is adressed in this presentation. After a review of the definions from the corresponding regulations a possible testing scheme is presented and discussed. It should only be possible to test a phlegmatized explosive out of class 1 via a negative result in test series 6. The characteristics of a suitable diluent is discussed in the second part of the presentation. T2 - IGUS EOS Meeting CY - Rijswijk, The Netherlands DA - 24.04.2017 KW - Desensitized explosives KW - Test series 6 PY - 2017 AN - OPUS4-41986 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -