TY - CONF A1 - Habel, Wolfgang A1 - Kusche, Nadine A1 - Münzenberger, Sven A1 - Schukar, Vivien T1 - KALFOS - a validation facility for strain transfer characterization of surface-applied strain sensors N2 - Strain sensors embedded in or attached to structural components have to measure the real deformation of the structure over the whole period of use. The user must know how reliably installed sensors provide strain measurement results. For this purpose, test facilities or coupon tests are used. In order to characterize the strain transfer quality from the host structure into surface-applied strain sensors, a unique testing facility has been developed. This facility can be used both for fiber optic and resistance strain sensors. Originally developed for fiber Bragg grating based sensors, the KALFOS facility (=calibration of fiber optic sensors) uses Digital Image Correlation (DIC) and Electronic Speckle Pattern Interferometer (ESPI) as unbiased referencing methods. It is possible to determine experimentally the strain transfer mechanism under combined thermal and mechanical loading conditions. This experimental characterization method will reveal weaknesses in commonly used strain sensors, and the investigation of the material systems used for fiber optic and other strain sensors (particularly the coating/substrate - adhesive combination). The KALFOS facility allows matching of specific measurement requirements with environmental conditions. T2 - SAE 2011 AeroTech Congress & Exhibition CY - Toulouse, France DA - 18.10.2011 KW - Fiber optic sensors KW - Structural health monitoring KW - Validation KW - Strain sensor KW - Surface application PY - 2011 U6 - https://doi.org/10.4271/2011-01-2606 IS - Paper 2011-01-2606 SP - 1 EP - 7 AN - OPUS4-24643 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gründer, Klaus-Peter A1 - Breithaupt, Mathias A1 - Chruscicki, Sebastian A1 - Münzenberger, Sven T1 - Untersuchungen zur Messunsicherheit lichtoptischer Eigenschaften von Retroreflex-Folien T2 - 6. Fachtagung des VDI/VDE 'Messunsicherheit praxisgerecht bestimmen' CY - PTB, Braunschweig, Germany DA - 2013-11-05 KW - Retroreflektierende Materialien KW - Spezifischer Rückstrahlwert KW - Messunsicherheit PY - 2013 SN - 978-3-18-092216-4 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte VL - 2216 SP - 91 EP - 101 AN - OPUS4-29644 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schukar, Vivien A1 - Kadoke, Daniel A1 - Kusche, Nadine A1 - Münzenberger, Sven A1 - Gründer, Klaus-Peter A1 - Habel, Wolfgang T1 - Validation and qualification of surface-applied fibre optic strain sensors using application-independent optical techniques N2 - Surface-applied fibre optic strain sensors were investigated using a unique validation facility equipped with application-independent optical reference systems. First, different adhesives for the sensor's application were analysed regarding their material properties. Measurements resulting from conventional measurement techniques, such as thermo-mechanical analysis and dynamic mechanical analysis, were compared with measurements resulting from digital image correlation, which has the advantage of being a non-contact technique. Second, fibre optic strain sensors were applied to test specimens with the selected adhesives. Their strain-transfer mechanism was analysed in comparison with conventional strain gauges. Relative movements between the applied sensor and the test specimen were visualized easily using optical reference methods, digital image correlation and electronic speckle pattern interferometry. Conventional strain gauges showed limited opportunities for an objective strain-transfer analysis because they are also affected by application conditions. KW - Fiber Bragg grating KW - Surface application KW - Qualification KW - Strain transfer KW - Digital image correlation KW - Electronic speckle pattern interferometry PY - 2012 U6 - https://doi.org/10.1088/0957-0233/23/8/085601 SN - 0957-0233 SN - 1361-6501 VL - 23 IS - 8 SP - 085601-1 - 085601-9 PB - IOP Publ. Ltd. CY - Bristol AN - OPUS4-26639 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schilder, Constanze A1 - Kusche, Nadine A1 - Schukar, Vivien A1 - Münzenberger, Sven A1 - Habel, Wolfgang T1 - Experimental qualification by extensive evaluation of fibre optic strain sensors N2 - Fibre optic strain sensors used in practical applications have to provide reliable measurements. Therefore, the applied sensor and the sensor systems must be validated experimentally. This can be achieved with facilities which use physically independent measurement systems in order to avoid the influences caused by the application of a reference sensor. This paper describes the testing methods of the specially developed validation facility KALFOS for the qualification and evaluation of surface-applied strain sensors. For reliable sensor results, the performance of fibre optic strain patches with and without FBG under combined thermal and mechanical loading was investigated. Additionally, the strain gauge factor of the fibre optic strain patches with FBG was determined experimentally and compared to the specified strain gauge factor. These results will be the basis for the development of guidelines and standards concerning the application of the sensors. KW - Evaluation KW - Qualification KW - Strain transfer KW - Fibre optic sensors KW - Fibre Bragg grating KW - Patch KW - Strain gauge KW - Validation facility KW - Laser extensometer KW - Electronic speckle pattern interferometry PY - 2013 U6 - https://doi.org/10.1088/0957-0233/24/9/094005 SN - 0957-0233 SN - 1361-6501 VL - 24 IS - 9 SP - 094005-1 EP - 094005-7 PB - IOP Publ. Ltd. CY - Bristol AN - OPUS4-29424 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lu, Xin A1 - Chruscicki, Sebastian A1 - Schukar, Marcus A1 - Münzenberger, Sven A1 - Krebber, Katerina T1 - Application of Intensity-Based Coherent Optical Time Domain Reflectometry to Bridge Monitoring N2 - Although distributed fiber sensing techniques have been widely used in structural health monitoring, the measurement results of bridge monitoring, particularly under destructive testing, have rarely been reported. To the best of our knowledge, this paper is the first report of distributed vibration measurement results, which we obtained during a three-day destructive test on an abolished bridge. A coherent optical time domain reflectometry (COTDR) was used to acquire the vibration information while the bridge was being sawed. The obtained signal was analyzed in time and frequency domain. Some characteristics of the sawing-induced vibration were retrieved by the short-time Fourier transform; the vibration exhibited several high frequency components within the measured range up to 20 kHz and all the components appeared in the same time slot. Some unexpected signals were also detected. Thorough analysis showed that they are quite different from the sawing-induced vibration and are believed to originate from internal damage to the bridge (probably the occurrence of cracks). KW - Destructive testing KW - Structural health monitoring KW - Distributed fiber sensing KW - Distributed acoustic sensing PY - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-547451 VL - 22 IS - 9 SP - 3434 PB - MDPI AN - OPUS4-54745 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hicke, Konstantin A1 - Chruscicki, Sebastian A1 - Münzenberger, Sven T1 - Urban traffic monitoring using Distributed Acoustic Sensing along laid fiber optic cables N2 - The feasibility of traffic monitoring along a major urban road using Distributed Acoustic Sensing (DAS) is demonstrated. We present measurement results of conventional intensity-based DAS along a dark fiber in a tubed fiber optic cable buried roadside. With only minimal postprocessing different classes of traffic participants can be distinguished (cars, bikes, pedestrians). Different methods for pre-processing raw data are compared, especially with regard to providing suitable inputs for pattern recognition algorithms. Furthermore, the various challenges for automatized vehicle detection and classification related to varying sensitivity and inhomogeneous signal propagation are discussed. Sensitivity fluctuations and variations are in part inherent to the measurement technology and originate in part in ground conditions. The measurement quality and usefulness for traffic monitoring of intensity-based DAS is compared to that of state-of-the-art phase-resolved DAS, allowing quantitative evaluation of vibration signals. T2 - EAGE GeoTech 2021 Second EAGE Workshop on Distributed Fibre Optic Sensing CY - Online meeting DA - 01.03.2021 KW - Distributed fiber optic sensing KW - Distributed acoustic sensing KW - DAS KW - Traffic monitoring KW - Road condition monitoring PY - 2021 U6 - https://doi.org/10.3997/2214-4609.202131008 VL - 2021 SP - Paper 8, 1 PB - European Association of Geoscientists & Engineers CY - Houten, Niederlande AN - OPUS4-52214 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schukar, Vivien A1 - Münzenberger, Sven A1 - Gründer, Klaus-Peter A1 - Habel, Wolfgang T1 - Experimental validation technique for strain transfer characterisation of fibre bragg grating based strain sensors N2 - A unique testing facility (KALFOS) using ESPI (electronic speckle pattern interferometery) as a referencing method has been realized for the characterisation of the strain transfer process from a component under load into surface applied fibre Bragg grating based strain sensors. The strain transfer mechanism can be described experimentally, while matching specific measurement requirements and environmental conditions. T2 - Photonics 2010 - 10th International conference on fiber optics & photonics CY - Guwahati, India DA - 2010-12-11 PY - 2010 SN - 978-81-309-1719-1 IS - Poster\255_SEN_Schukar_V_G_1_full SP - 1 EP - 4 AN - OPUS4-23007 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gründer, Klaus-Peter A1 - Goedecke, Thomas A1 - Kadoke, Daniel A1 - Müller, Karsten A1 - Münzenberger, Sven A1 - Protz, Christian T1 - Prüfung von Gefahrgutumschließungen mit optischen 3D-Messverfahren N2 - Der Beitrag konzentriert sich auf bildgebende Messverfahren, die der dreidimensionalen Bestimmung mechanischer, geometrischer und kinematischer Parameter von Materialien und Bauteilen dienen. Das sind hier insbesondere die Mehrbildfotogrammetrie sowie die Stereomessverfahren, die auf folgenden physikalisch-optischen Grundlagen beruhen: die zeit- und raumveränderliche Projektion von Lichtstreifensystemen, die Bildkorrelation mittels Grauwertmustern und die Verfolgung kontrastreich applizierter Punkttargets. Letztendlich werden aus den gemessenen Punktkoordinaten unterschiedlicher Dichte und Belastungszustände die gewünschten 3D-Parameter abgeleitet. Hierzu gehören z. B. die Oberflächengestalt und deren Verformung, approximierte 3D-Geometrielemente, veränderliche 6DoF-Starrkörperorientierungen, Vektorverschiebungsfelder, Oberflächendehnung, Koordinaten-Zeit-Funktionen, Geschwindigkeit und Beschleunigung. Diese Kenngrößen sind beispielsweise für die Ermittlung mechanischer Werkstoffeigenschaften und -kennwerte bis hin zur Form- und Verformungsmessung von Bauteilen in gezielt quasi-statisch oder dynamisch beanspruchenden Prüfeinrichtungen wichtig. Vorteilhaft für die praktische Anwendung dieser Verfahren ist insbesondere, dass sie berührungslos arbeiten, kombiniert werden können und skalierbar sind z. B. hinsichtlich Messvolumen, Auflösung, Genauigkeit und Koordinatensystemen der zu bestimmenden 3D-Punktkoordinaten an Materialoberflächen bzw. Komponenten. Ausgehend von der Beschreibung der messtechnischen Prinzipien dieser Verfahren sollen zwei Anwendungsbeispiele aus dem Bereich der Gefahrgutbehäl-terprüfung im Rahmen von Bauartzulassungen und der normungsbegleitenden Mate-rialforschung den Stand in der Anwendungspraxis aufzeigen und einen Eindruck hinsichtlich der flexiblen Einsatzmöglichkeiten dieser optischen 3D-Verfahren verdeutlichen. T2 - 4. Fachseminar Optische Prüf- und Messverfahren CY - Hamburg, Germany DA - 17.03.2015 KW - 3D-Messverfahren KW - Verformung KW - Dehnung KW - Bremsbeschleunigung PY - 2015 SP - Vortrag 9, 1 EP - 10 AN - OPUS4-32808 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Liehr, Sascha A1 - Muanenda, Y. S. A1 - Münzenberger, Sven A1 - Krebber, Katerina T1 - Relative change measurement of physical quantities using dual-wavelength coherent OTDR N2 - We propose the use of alternating pulse wavelengths in a direct-detection coherent optical time domain reflectometry (C-OTDR) setup not only to measure strain and temperature changes but also to determine the correct algebraic sign of the change. The sign information is essential for the intended use in distributed mode shape analysis of civil engineering structures. Correlating relative backscatter signal shifts in the temporal/signal domain allows for measuring with correct magnitude and sign. This novel approach is simulated, experimentally implemented and demonstrated for temperature change measurement at a spatial resolution of 1 m. KW - Fiber optics sensors KW - Backscattering KW - Rayleigh KW - C-OTDR KW - Distributed sensing KW - Temperature measurement KW - Strain measurement PY - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-389449 SN - 1094-4087 VL - 25 IS - 2 SP - 720 EP - 729 PB - Optical Society of America CY - Washington, DC, USA AN - OPUS4-38944 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Liehr, Sascha A1 - Münzenberger, Sven A1 - Krebber, Katerina T1 - Wavelength-scanning coherent OTDR for dynamic high strain resolution sensing N2 - Distributed vibration sensing in optical fibers opened entirely new opportunities and penetrated various sectors from security to seismic monitoring. Here, we demonstrate a most simple and robust approach for dynamic strain measurement using wavelength-scanning coherent optical time domain reflectometry (C-OTDR). Our method is based on laser current modulation and Rayleigh backscatter shift correlation. As opposed to common single-wavelength phase demodulation techniques, also the algebraic sign of the strain change is retrieved. This is crucial for the intended applications in structural health monitoring and modal analysis. A linear strain response down to 47.5 pε and strain noise of 100 pε/√Hz is demonstrated for repetition rates in the kHz range. A field application of a vibrating bridge is presented. Our approach provides a cost-effective high-resolution method for structural vibration analysis and geophysical applications. KW - Fiber optics sensors KW - Optical time domain reflectometry KW - Rayleigh Scattering KW - Distributed acoustic sensing KW - Distributed strain sensing PY - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-448069 SN - 1094-4087 VL - 26 IS - 8 SP - 10573 EP - 10588 PB - Optical Society of America AN - OPUS4-44806 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kowarik, Stefan A1 - Hussels, Maria-Teresa A1 - Chruscicki, Sebastian A1 - Münzenberger, Sven A1 - Lämmerhirt, A. A1 - Pohl, P. A1 - Schubert, M. T1 - Fiber Optic Train Monitoring with Distributed Acoustic Sensing: Conventional and Neural Network Data Analysis N2 - Distributed acoustic sensing (DAS) over tens of kilometers of fiber optic cables is well-suited for monitoring extended railway infrastructures. As DAS produces large, noisy datasets, it is important to optimize algorithms for precise tracking of train position, speed, and the number of train cars, The purpose of this study is to compare different data analysis strategies and the resulting parameter uncertainties. We present data of an ICE 4 train of the Deutsche Bahn AG, which was recorded with a commercial DAS system. We localize the train signal in the data either along the temporal or spatial direction, and a similar velocity standard deviation of less than 5 km/h for a train moving at 160 km/h is found for both analysis methods, The data can be further enhanced by peak finding as well as faster and more flexible neural network algorithms. Then, individual noise peaks due to bogie clusters become visible and individual train cars can be counted. From the time between bogie signals, the velocity can also be determined with a lower standard deviation of 0.8 km/h, The analysis methods presented here will help to establish routines for near real-time Train tracking and train integrity analysis. KW - Artificial neural networks KW - Distributed fiber optic sensing KW - Distributed acoustic sensing KW - Train tracking PY - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-502872 VL - 20 IS - 2 SP - 450 PB - MDPI CY - Basel, Switzerland AN - OPUS4-50287 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liehr, Sascha A1 - Münzenberger, Sven A1 - Krebber, Katerina T1 - Wavelength-scanning distributed acoustic sensing for structural monitoring and seismic applications N2 - We introduce wavelength-scanning coherent optical time domain reflectometry (WS-COTDR) for dynamic vibration sensing along optical fibers. The method is based on spectral shift computation from Rayleigh backscatter spectra. Artificial neural networks (ANNs) are used for fast and high-resolution strain computation from raw measurement data. The applicability of the method is demonstrated for vibration monitoring of a reinforced concrete bridge. We demonstrate another application example for quasi-static and dynamic measurement of ground deformation and surface wave propagation along a dark fiber in a telecommunication cable. T2 - 7th International Symposium on Sensor Science CY - Napoli, Italy DA - 09.05.2019 KW - Optical fiber sensor KW - Distributed acoustic sensor (DAS) KW - Optical time domain reflectometry KW - Rayleigh scattering KW - Artificial neural networks KW - Structural health monitoring KW - Seismic measurement PY - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-487733 SN - 2504-3900 VL - 15 SP - Paper 30, 1 EP - 5 PB - MDPI CY - Basel AN - OPUS4-48773 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Liehr, Sascha A1 - Münzenberger, Sven A1 - Borchardt, Christopher T1 - Long-distance fiber optic vibration sensing using convolutional neural networks as real-time denoisers N2 - A long distance range over tens of kilometers is a prerequisite for a wide range of distributed fiber optic vibration sensing applications. We significantly extend the attenuation-limited distance range by making use of the multidimensionality of distributed Rayleigh backscatter data: Using the wavelength-scanning coherent optical time domain reflectometry (WS-COTDR) technique, backscatter data is measured along the distance and optical frequency dimensions. In this work, we develop, train, and test deep convolutional neural networks (CNNs) for fast denoising of these two-dimensional backscattering results. The very compact and efficient CNN denoiser “DnOTDR” outperforms state-of-the-art image denoising algorithms for this task and enables denoising data rates of 1.2 GB/s in real time. We demonstrate that, using the CNN denoiser, the quantitative strain measurement with nm/m resolution can be conducted with up to 100 km distance without the use of backscatter-enhanced fibers or distributed Raman or Brillouin amplification. KW - Neural networks KW - Fiber optic KW - Vibration sensing PY - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-518694 VL - 28 IS - 26 SP - 39325 AN - OPUS4-51869 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Liehr, Sascha A1 - Jäger, L. A. A1 - Karapanagiotis, Christos A1 - Münzenberger, Sven A1 - Kowarik, Stefan T1 - Real-time dynamic strain sensing in optical fibers using artificial neural networks N2 - We propose to use artificial neural networks (ANNs) for raw measurement data interpolation and signal shift computation and to demonstrate advantages for wavelength-scanning coherent optical time domain reflectometry (WS-COTDR) and dynamic strain distribution measurement along optical fibers. The ANNs are trained with synthetic data to predict signal shifts from wavelength scans. Domain adaptation to measurement data is achieved, and standard correlation algorithms are outperformed. First and foremost, the ANN reduces the data analysis time by more than two orders of magnitude, making it possible for the first time to predict strain in real-time applications using the WS-COTDR approach. Further, strain noise and linearity of the sensor response are improved, resulting in more accurate measurements. ANNs also perform better for low signal-to-noise measurement data, for a reduced length of correlation input (i.e., extended distance range), and for coarser sampling settings (i.e., extended strain scanning range). The general applicability is demonstrated for distributed measurement of ground movement along a dark fiber in a telecom cable. The presented ANN-based techniques can be employed to improve the performance of a wide range of correlation or interpolation problems in fiber sensing data analysis and beyond. KW - Distributed vibration sensing KW - Distributed acoustic sensing KW - Coherent optical time domain reflectometry KW - Optical fiber sensor KW - Artificial neural network KW - Real time measurement KW - Distributed strain sensing PY - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-474832 UR - https://www.osapublishing.org/oe/abstract.cfm?uri=oe-27-5-7405 SN - 1094-4087 VL - 27 IS - 5 SP - 7405 EP - 7425 PB - Optical Society of America AN - OPUS4-47483 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Liehr, Sascha A1 - Muanenda, Y. A1 - Münzenberger, Sven A1 - Krebber, Katerina T1 - Wavelength-modulated C-OTDR techniques for distributed dynamic measurement N2 - We present two wavelength-modulated coherent optical time domain reflectometry techniques for dynamic, quantitative and distributed measurement. The robust and simple techniques are based on backscattering correlations along the time axis and along the pulse wavelength shift axis. T2 - 26th International Conference on Optical Fibre Sensors OFS-26 CY - Lausanne, Switzerland DA - 24.09.2018 KW - Fiber optics sensors KW - Optical time domain reflectometry KW - OTDR KW - DAS KW - Distributed strain sensor KW - Rayleigh scattering PY - 2018 U6 - https://doi.org/10.1364/OFS.2018.TuE15 SP - 1 EP - 4 AN - OPUS4-46414 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -