TY - GEN A1 - Stephan, H. A1 - Gloe, K. A1 - Kraus, Werner A1 - Spies, H. A1 - Johannsen, B. A1 - Wichmann, K. A1 - Reck, Günter A1 - Chand, D. K. A1 - Bharadwaj, P. K. A1 - Müller, U. A1 - Müller, W. M. A1 - Vögtle, F. ED - Moyer, B. A. T1 - Binding and extraction of pertechnetate and perrhenate by azacages T2 - Symposium Fundamentals and Applications of Anion Separations ; American Chemical Society national meeting CY - Chicago, IL, USA DA - 2001-08-25 PY - 2004 SN - 0-306-47911-7 SP - 151 EP - 168 PB - Kluwer Acad./Plenum Publ. CY - New York, NY AN - OPUS4-3667 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Röhrich, J. A1 - Damerow, T. A1 - Hahn, W. A1 - Müller, U. A1 - Reinholz, Uwe A1 - Denker, A. T1 - A tandetron as proton injector for the eye tumor therapy in Berlin N2 - The therapy of eye tumors with fast protons is an excellent tool giving very high local control rates. At the Helmholtz-Zentrum Berlin (HZB) almost 1800 patients were treated since 1998. A 2 MV Tandetron™ was installed as injector for the k = 132 HZB cyclotron. Using the standard 358 duoplasmatron ion source with direct extraction of negative hydrogen ions an extremely stable proton beam can be delivered, both on the short-term and the long-term scale. The hair-needle filaments made from thoriated tungsten wires have safe operation times of more than 1000 h. KW - Biomedical equipment KW - Duoplasmatrons KW - Eye KW - Particle beam extraction KW - Radiation therapy KW - Tumours PY - 2012 DO - https://doi.org/10.1063/1.3662475 SN - 0034-6748 SN - 1089-7623 VL - 83 IS - 02B903 SP - 1 EP - 3 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-25721 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Miccoli, Lorenzo A1 - Müller, U. A1 - Silva, B. A1 - Da Porto, F. A1 - Hracov, S. A1 - Pospisil, S. A1 - Adami, C.-E. A1 - Vintzileou, E. A1 - Vasconcelos, G. A1 - Poletti, E. ED - Jasienko, J. T1 - Overview of different strengthening techniques applied on walls used in historical structures N2 - Different types of vertical elements, such as masonry, massive walls and timber frame elements, exhibit a different response exposed to the same loading scenario, in particular when it concerns dynamic loading. It is therefore paramount to investigate the principal response of different types of construction with different materials under a variety of loading scenarios. From there, the design of strengthening techniques against earthquakes can be performed. This paper presents the results from experiments, where various retrofitting techniques were tested. The goals were to define and improve laboratory procedures for evaluating the intervention technologies and specifications for laboratory specimens. From this base tests to characterise the experimental behaviour of original and strengthened masonry walls were performed, in order to obtain information on the system performance and the main constitutive laws relevant for modelling. The test campaigns were focused on static tests as well as cyclic tests of unreinforced and reinforced vertical building elements. The study is part of our work in the framework of the ongoing project NIKER funded by the European Commission dealing with improving immovable Cultural Heritage assets against the risk of earthquakes. T2 - SAHC 2012 - 8th International conference on structural analysis of historical constructions CY - Wroclaw, Poland DA - 15.10.2012 KW - Stone masonry KW - Brick masonry KW - Earthen materials KW - Half timbered walls KW - Grouting PY - 2012 SN - 978-83-7125-216-7 SN - 0860-2395 VL - 3 SP - 2870 EP - 2878 PB - DWE CY - Wroclaw, Poland AN - OPUS4-27275 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Miccoli, Lorenzo A1 - Müller, U. ED - Jasienko, J. T1 - Characterisation of earthen elements. A comparison between earth block masonry, rammed earth and cob T2 - SAHC 2012 - 8th International conference on structural analysis of historical constructions CY - Wroclaw, Poland DA - 15.10.2012 KW - Earthen materials KW - Compression test KW - Diagonal compression test KW - Initial shear strength test PY - 2012 SN - 978-83-7125-216-7 SN - 0860-2395 VL - 1 SP - 841 EP - 849 PB - DWE CY - Wroclaw, Poland AN - OPUS4-27277 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, U. A1 - Miccoli, Lorenzo A1 - Perrone, C. A1 - Ziegert, C. T1 - Vergleich und Modellierung der mechanischen Eigenschaften von Bauteilen aus Lehmsteinmauerwerk, Wellerlehm und Stampflehm N2 - Im Rahmen des EU-Projekts NIKER (www.niker.eu) wurden die mechanischen Eigenschaften von Bauteilen aus Lehmsteinmauerwerk, Wellerlehm und Stampflehm bestimmt. Ziel war es grundlegende Daten zum Festigkeits- und Verformungsverhalten von Lehmbauteilen zu erhalten. Die Daten wurden als Eingangsgrößen zur Modellierung des Bauteilverhaltens verwendet. Die Ergebnisse zeigten, dass unter Druckbeanspruchung Lehmsteinmauerwerk und Stampflehm ein ähnliches Verformungsverhalten aufweisen. Dagegen zeigte Wellerlehm zwar deutlich niedrigere Druckfestigkeiten aber das Nachbruchverhalten war im Vergleich zu den beiden anderen Bauweisen wesentlich deutlicher ausgeprägt. Erste Ergebnisse zur Makromodellierung des Festigkeits- und Verformungsverhaltens sowohl im elastischen als auch plastischen Bereich zeigen eine gute Übereinstimmung mit den experimentell ermittelten Daten. Die Modellierung auch von komplizierteren Lehmbauteilformen unter statischer Last scheint somit in absehbarer Zeit möglich. T2 - Lehm 2012 - 6. Internationale Fachtagung für Lehmbau CY - Weimar, Germany DA - 05.10.2012 KW - Stampflehm KW - Lehmstein KW - Mauerwerk KW - Wellerlehm KW - Mechanische Eigenschaften PY - 2012 SN - 978-3-00-039649-6 IS - Session C SP - 320 EP - 331 AN - OPUS4-26936 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Miccoli, Lorenzo A1 - Pospísil, S. A1 - Müller, U. A1 - Hracov, S. T1 - Verhalten von Lehmstein- und Stampflehmwänden unter dynamischer Belastung und Effizienz von Bewehrungsmaßnahmen N2 - Lehmbauten repräsentieren einen bedeutenden Teil des kulturellen Erbes. Sie erfordern einen hohen Erhaltungsaufwand und wenngleich die Beschädigung sowie der Einsturz solcher Wohngebäude zum Verlust von Menschenleben führen, sind Erdbeben ebenso verheerend für das gebaute kulturelle Erbe in diesen Regionen. In der Tat wird es häufig übersehen, dass ein bedeutender Teil der Weltkulturerbestätten, die gefährdet sind, aus Lehm gebaut sind. T2 - Lehm 2012 - 6. Internationale Fachtagung für Lehmbau CY - Weimar, Germany DA - 05.10.2012 KW - Earth blocks KW - Rammed earth KW - Static loads KW - Dynamic loads KW - Cyclic tests PY - 2012 SN - 978-3-00-039649-6 IS - Session C SP - 122 EP - 133 AN - OPUS4-26935 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Miccoli, Lorenzo A1 - Fontana, Patrick A1 - Müller, U. T1 - Charakterisierung von Lehmmauerwerk unter statischer Druck- und Schubbeanspruchung N2 - Schätzungen zufolge leben und arbeiten zurzeit 30 bis 40 % der Weltbevölkerung in Gebäuden aus Lehm. Darunter befindet sich auch eine nicht unerhebliche Anzahl an Baudenkmälern, davon viele in einem gefährdeten Zustand. Bauwerke aus Lehm erfordern einen hohen Unterhaltungsaufwand, da sie anfällig sind für Erosion bei Regen sowie Abplatzungen und Querschnittsschwächung, wenn Salze kapillar transportiert werden und auskristallisieren. Außerdem sind sie empfindlich gegenüber mechanischen Beanspruchungen. So führen bereits relativ niedrige Zug- oder Druckspannungen zu Schädigungen durch Rissbildung. Einige Lehmbauweisen werden heute nicht mehr ausgeführt und das Wissen über sie ist zumindest teilweise verloren gegangen. Die verschiedenen Lehmbauweisen unterscheiden sich deutlich in Bezug auf die Zusammensetzung des Materials und die Bautechniken. KW - Lehmmauerwerk KW - Druck- und Schubbeanspruchung PY - 2013 SN - 978-3-433-03017-2 SN - 978-3-433-60296-6 SN - 0170-4958 IS - Kap. 1.2.6 SP - 629 EP - 633 PB - Ernst & Sohn AN - OPUS4-28584 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit A1 - Fontana, Patrick A1 - Müller, U. A1 - Bürgisser, P. ED - Uzoegbo, H.C. ED - Schmidt, Wolfram T1 - Influence of natural pozzolans on the risk of alkali silica reaction N2 - Industrial byproducts and natural pozzolanas are increasingly being used as supplementary cementitious materials. In the group of natural pozzolanas volcanic ashes are the most prominent. Despite the fact that volcanic pozzolanas were used since Roman times, not much is known about their role in influencing the long term durability of concrete. The paper presents results of the volcanic pozzolana ‘Rhenish trass’, which is quarried in western Germany and its role during an alkali silica reaction (ASR). Field data and laboratory experiments indicate that trass releases alkalis into the pore solution but also changes cement paste chemistry and alkali binding behavior. There seems to be a sensitive balance between alkali release and increase of alkali binding capacity, both mechanisms crucial for the course of an ASR in concrete. T2 - ACCTA - International conference on advances in cement and concrete technology in Africa 2013 CY - Johannesburg, South Africa DA - 28.01.2013 KW - Alkali silica reaction KW - Natural pozzolans KW - Microscopy KW - Micro chemical analysis PY - 2013 SN - 978-3-9815360-3-4 SP - 801 EP - 808 AN - OPUS4-27765 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Falchi, L. A1 - Müller, U. A1 - Fontana, Patrick A1 - Balliana, E. A1 - Zendri, E. ED - Charola, A.E. ED - Rodrigues, J.D. T1 - Artificial weathering of water-repellent mortars suitable for restoration applications N2 - The study evaluates Portland limestone cement mortars, natural hydraulic lime mortars and pozzolan-lime mortars modified with water-repellent admixtures (metal soaps and siloxanes) for their use in the maintenance of historic buildings. The chemical-physical characteristics, the durability and the resistance to artificial weathering (exposure to UV light and artificial rain) were examined. The exposure conditions used in the ageing test were chosen in order to simulate outdoor environmental conditions, in particular the processes caused by UV-light and thermal shock induced by rain water. T2 - Hydrophobe VII - 7th International conference on water repellent treatment and protective surface technology for building materials CY - Lisbon, Portugal DA - 11.09.2014 KW - Water repellent admixtures KW - Mortars KW - Portland limestone cement KW - Natural hydraulic lime KW - Pozzolana-lime KW - Artificial weathering PY - 2014 SN - 978-972-49-2270-6 SP - 123 EP - 132 AN - OPUS4-32138 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Miccoli, Lorenzo A1 - Garofano, A. A1 - Fontana, Patrick A1 - Müller, U. ED - Lourenco, P.B. ED - Haseltine, B.A. ED - Vasconcelos, G. T1 - Static behaviour of earth block masonry: experimental testing and finite element modelling N2 - In this paper an extensive research campaign aimed to define the mechanical performance of earth block masonry panels is presented. Uniaxial compression and diagonal compression tests were performed. The test results confirmed the brittle behaviour of earth block masonry under uniaxial compressive load and showed that the failure of earth block masonry under shear load occurs by sliding of the earth blocks along the mortar joints after initial cracking in mortar joints and earth blocks. For diagonal compression test results showed that building technique practice is one of the key factors affecting the structural performances. Experimental behaviour was modelled with a non-linear model capable of describing cracking behaviour. Both micro-modelling and macro-modelling implementing isotropic or orthotropic material laws were used to assess the reliability of different modelling strategies. The model calibration was carried out by sensibility analysis of the input parameters to understand the influence of unit strength on the shear behaviour of masonry. T2 - 9th IMC - International Masonry Conference CY - Guimaraes, Portugal DA - 07.07.2014 KW - Earthen materials KW - Compression test KW - Diagonal compression test KW - Numerical modelling KW - Earth block masonry KW - Uniaxial compression test PY - 2014 SN - 978-972-8692-85-8 SP - Paper ID 1484, 1 EP - 14 AN - OPUS4-31138 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -