TY - CONF A1 - Mair, Georg W. A1 - Lehr, Christian A1 - Schoppa, André A1 - Szczepaniak, Mariusz A1 - Duffner, Eric T1 - Berstprüfung von Gasflaschen - Besichtigung Prüffeld Druckgefäße N2 - Der Vortrag dient zur Erläuterung der Hintergründe der der Prüffeld gezeichten Prüfung und Ausstellungsstücke. Es wird zunächst erläutert, warum es Berstprüfungen gibt, und für welche Druckgefgäße diese verpflichtend sind. Dann wird auf die Prüfparameter eingegangen und die besondere Rolle der zu hoch angesetzten Druckrate. Dies leitet zur Prüftechnik der BAM über, der reale Druckkurven miteinander verglichen werden. Es wird die Prüf- und Messtechnik der anstehenden Prüfung erläutert und der Versuch gezeigt (nicht Teil der Folien). Im Nachgang wird erläutert wo die Grenzen der Interpretation dieser Prüfung liegen, und auf die langsame Berstprüfung und das dafür und für die Lastwechselprüfung bei der BAM vorhandene Equipment übergeleitet. T2 - Gefahrguttechniktage Verpackungen 2017 CY - BAM-FB, Berlin, Germany DA - 09.11.2017 KW - Gastransport KW - Druckanstiegsrate KW - Schutzbehälter KW - Reproduzierbarkeit KW - Messtechnik PY - 2017 AN - OPUS4-43114 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eisermann, René A1 - Basedau, Frank A1 - Kadoke, Daniel A1 - Gründer, Peter A1 - Schoppa, André A1 - Lehr, Christian A1 - Szczepaniak, Mariusz A1 - John, Sebastian A1 - Schukar, Marcus A1 - Munzke, Dorit A1 - Mair, Georg W. T1 - Distributed strain sensing with sub-centimetre resolution for the characterisation of structural inhomogeneities and material degradation of industrial high-pressure composite cylinders N2 - Fibre-reinforced plastics (FRP) especially carbon-fibre-reinforced polymer (CFRP) and glass-fibre-reinforced polymer (GFRP) are commonly used materials in high pressure vessels and storage units for automotive and aerospace purposes. Optical fibres are suitable to be integrated or directly applied to the surface of FRP components. Using optical fibres it is possible to monitor the distributed strain profiles and changes within the fatigue life of a pressure vessel to ensure the operational safety. Within artificial ageing experiments we used swept wavelength interferometry (SWI) based distributed strain sensing for the monitoring of commercial high-pressure composite cylinder. This artificial ageing was performed using test conditions of 503bar pressure load (service pressure 300 bar) and 89 °C for 100 h. The polyimide coated optical fibres were glued to the surface externally in circumferential and axial direction. Using distributed strain sensing (DSS) material expansion of over 0.5% were monitored with sub-centimetre spatial resolution. Within the circumferential direction we observed up to 10 % local fluctuation compared to the median strain caused by inhomogeneous material expansion, which could cause local material fatigue. In addition, we determined material degradation manifested itself as localized remaining material expansion and/or contraction. Results have been validated by other non-destructive methods like digital strip projection. T2 - 9th European Workshop on Structural Health Monitoring (EWSHM) CY - Manchester, UK DA - 10.07.2018 KW - Distributed fibre optic sensors KW - Optical backscatter reflectometry KW - Swept wavelength interferometry (SWI) KW - Structural health monitoring (SHM) KW - Composite structures KW - Optical fibre PY - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-458926 SP - 1 EP - 8 AN - OPUS4-45892 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Becker, Ben A1 - Mair, Georg W. A1 - Schoppa, Andre A1 - Duffner, Eric A1 - Szczepaniak, Mariusz A1 - Klauke, Andre A1 - Lenz, Stefan A1 - Lehr, Christian A1 - Hoffmann, Martin A1 - Gregor, Christian ED - Mair, Georg W. T1 - CryoCode: Kryodruck Tanksystem und Betankung – Validierung bis zum Normierungsvorschlag N2 - Entwicklung und Validierung eines Kryodruck-Tanksystems für Wasserstoff-Fahrzeuge. Darstellung der Versuchsergebnisse und des Normierungsvorschlags. KW - Kryodruck KW - Wasserstoff KW - Druckbehälter KW - Composite KW - Normierungsvorschlag PY - 2017 SP - 1 EP - 56 AN - OPUS4-40714 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -