TY - JOUR A1 - Klinger, Christian A1 - Braune, G. A1 - Lüddecke, F. T1 - Erhöhung der Restnutzungsdauer an ermüdungsüberanspruchten Bauteilen einer Stabbogenbrücke bei Lutherstadt Wittenberg N2 - An einer Eisenbahnbrücke über die Elbe bei Lutherstadt Wittenberg führten windinduzierte Schwingungen zu einer unplanmäßigen und frühzeitigen Ermüdung ausgewählter Bauteile und Verbindungen des Stahltragwerks. Für die zyklisch bereits vorbelasteten und noch im Bauwerk befindlichen Bauteile konnte rechnerisch eine ausreichende Restnutzungsdauer nicht ermittelt werden. Auf Basis von experimentellen Untersuchungen wurde daher ein ingenieurmäßiges und baustellengeeignetes Sanierungskonzept für die vorbelasteten Bauteile entwickelt, deren Hauptbestandteil das Beschleifen der betroffenen Oberflächen darstellt. Weiterhin wurden für die ermüdeten Schweißverbindungen bruchmechanische Berechnungen angestellt, um auch deren Restnutzungsdauer abschätzen zu können. Hierfür wurden den im Bereich der Deutschen Bahn AG geltenden Rechenansätzen vergleichend weitere Ansätze aus dem Maschinenbau gegenübergestellt. Durch die angestellten Berechnungen und Untersuchungen konnte nachgewiesen werden, dass für die betroffenen Bauteile nach deren Sanierung ausreichende Tragsicherheit und Ermüdungssicherheit vorschriftengemäß eingehalten werden. KW - Winderregte Schwingungen KW - Dämpfung KW - Schwingrisse KW - Ermüdung KW - Bruchmechanik PY - 2008 DO - https://doi.org/10.1002/stab.200810099 SN - 0038-9145 SN - 1437-1049 SN - 0932-6375 VL - 77 IS - 12 SP - 870 EP - 879 PB - Ernst CY - Berlin AN - OPUS4-22852 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rücker, Werner A1 - Lüddecke, F. T1 - Experimentelle Modellverifikation zur Optimierung von Tragwerkselementen aus Stahlguss T2 - OGOWin Abschlussveranstaltung CY - Bremerhaven, Germany DA - 2010-05-31 PY - 2010 AN - OPUS4-22758 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Baeßler, Matthias A1 - Cuéllar, Pablo A1 - Victor, A. A1 - Lüddecke, F. ED - Triantafyllidis, T. T1 - Stability and large deformations of slender structures supported by soil materials N2 - The stability and geometric nonlinearities of slender structures are a major topic in structural design. While this topic is most relevant in the field of Structural Engineering, e.g. for steel or concrete structures, only few applications take the role of soil-structure-interaction explicitly into account. The focus of this paper is placed on the impact of soil support and its modelling for the buckling analysis based on examples both for pile foundations and for railway track stability. The general interaction between steel design and the geotechnical input will be addressed. The paper discusses and summarizes a range of subtopics based on experience and current research at the author’s institute. KW - Buckling soil-structure-interaction offshore piles track PY - 2020 SN - 978-3-030-28515-9 SN - 978-3-030-28516-6 DO - https://doi.org/10.1007/978-3-030-28516-6 SN - 1613-7736 SN - 1860-0816 VL - 91 SP - 355 EP - 369 PB - Springer CY - Cham, Switzerland AN - OPUS4-49166 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Balscheit, Hagen A1 - Victor, A. A1 - Thiele, Marc A1 - Cuellar, Pablo A1 - Baeßler, Matthias A1 - Lüddecke, F. T1 - Experimental Investigation on Buckling Behavior of soil-embedded Piles N2 - Monopiles are currently the predominant foundation type for offshore wind turbines in Europe. Due to the increasing dimensions of the turbines, pile diameters beyond 10m become necessary. A design-relevant failure mode of monopiles is the local buckling of the pile wall in the embedded sections. Relevant buckling guidelines do not consider the soil-structure interaction specifically, although the embedment may allow for a reduction of wall thickness. However, Eurocode-based design concepts require a validation with comparative buckling cases for validation, either in terms of buckling curve parameters for both the algebraic stress-based and semi-numerical LBA/MNA design concept or as a calibration factor kGMNIA for fully numerical GMNIA calculations. These parameters are not yet available for embedded shells. To close this gap, we have conducted experiments on piles embedded in sand to investigate local buckling under soil-structure-interaction. The results will be used to calibrate numerical models. This research was carried out as part of the VERBATIM research project, funded by PTJ/BMWK and supported by the Carbon Trust's Offshore Wind Accelerator consortium. T2 - EUROSTEEL 2023 CY - Amsterdam, The Netherlands DA - 11.09.2023 KW - Wind KW - Wind Energy KW - Shell Buckling KW - Offshore KW - Soil-Structure-Interaction PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-583641 DO - https://doi.org/10.1002/cepa.2313 SN - 2509-7075 VL - 6 IS - 3-4 SP - 1729 EP - 1734 PB - Ernst & Sohn Gmb AN - OPUS4-58364 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -