TY - JOUR A1 - Eckhardt, Dietrich A1 - Kurth, Lutz A1 - Rodner, Hans-Jochen T1 - Enschede - Ursachen und Folgen der Feuerwerkskatastrophe N2 - Am 13. Mai 2000 ereignete sich in der niederländischen Stadt Enschede ein Explosionsunfall mit Feuerwerk, bei dem riesige Schäden angerichtet wurden. Nach einer Schilderung des zeitlichen Ablaufes werden die Ursachen analysiert. Falsche Klassifizierung und das Fehlen von Schutz- und Sicherheitsabständen sind wesentliche Ursachen für das Ausmaß der Schäden. Aus der Sicht der in Deutschland gültigen Vorschriften für die Lagerung von Feuerwerk werden sicherheitstechnische Aspekte diskutiert. Angesprochen werden weiterhin einige Schlussfolgerungen, die auf nationaler wie auch internationaler Ebene gezogen wurden. PY - 2002 SN - 0343-3560 VL - 32 IS - 2 SP - 4 EP - 7 PB - Thiekötter CY - Münster AN - OPUS4-2180 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kurth, Lutz T1 - Beförderungsbestimmungen für Abbrenner T2 - Pyrotechnikseminar II - Staatlich anerkannter Grundlehrgang für das Verwenden von pyrotechnischen Gegenständen - Abbrennen von Feuerwerken CY - Laubach, Germany DA - 2002-10-09 PY - 2002 AN - OPUS4-3209 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kurth, Lutz T1 - Beförderungsrechtliche Vorschriften T2 - Pyrotechnikseminar I - Staatlich anerkannter Grundlehrgang für das Verwenden von pyrotechnischen Gegenständen - Abbrennen von Feuerwerken CY - Laubach, Germany DA - 2002-10-08 PY - 2002 AN - OPUS4-3210 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kurth, Lutz T1 - Entwicklung eines Systems zur Zulassung von Großfeuerwerk T2 - BAM-Kolloquium CY - Berlin, Germany DA - 2002-06-26 PY - 2002 AN - OPUS4-3211 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von Oertzen, Alexander A1 - Kurth, Lutz ED - Rockland, U. T1 - Modellgebäude: 1,5-kg-Satz. Auswirkungen einer unbeabsichtigten Explosion in einem in ausblasebauweise gebauten Arbeitsraum N2 - Die BAM verfügt auf ihrem Versuchsgelände in Horstwalde über ein Modellgebäude, das in der gleichen Weise aufgebaut ist, wie Gebäudeteile, die in der Explosivstoff verarbeitenden Industrie eingesetzt werden. T2 - 10. Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik CY - Berlin, Deutschland DA - 2004-06-17 PY - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-48568 SP - 59 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-4856 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von Oertzen, Alexander A1 - Kurth, Lutz A1 - Rodner, Hans-Jochen ED - Rockland, U. T1 - Brandwallanlage: UN-6(c)-Test, sowie nach SprengLR 010, Prüfung D T2 - 10. Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik CY - Berlin, Deutschland DA - 2004-06-17 PY - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-48605 SP - 63 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-4860 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kurth, Lutz T1 - Sicherheitsmaßnahmen für das Abbrennen von pyrotechnischen Gegenständen der Klasse IV (Kategorie 4) T2 - Behörden-Erfahrungsaustausch über Sprengstoff und Pyrotechnik; Transportrecht CY - Berlin, Germany DA - 2008-04-21 PY - 2008 AN - OPUS4-18021 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kurth, Lutz T1 - Aufbewahrung kleiner Mengen (TR) T2 - Behörden-Erfahrungsaustausch über Sprengstoff und Pyrotechnik; Transportrecht CY - Berlin, Germany DA - 2008-04-21 PY - 2008 AN - OPUS4-18022 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lohrer, Christian A1 - Fink, Heidrun A1 - Kurth, Lutz T1 - Failure rates of consumer fireworks - testing experiences by the notified body BAM N2 - Before fireworks articles are permitted to be placed on the EU market, they need to undergo several tests to demonstrate their functional behavior. The European Directive, 2007/23/EC of the European Parliament and of the Council of 23 May 2007 on the placing on the market of pyrotechnic articles, defines so-called “essential safety requirements” (ESR, refer to the respective Annex I) which must be met by all pyrotechnic articles. The specific tests and further requirements on function and construction are defined in the downstream harmonized Standards. By application of these Standards, a conformity assumption to the ESR is triggered. In case of consumer fireworks, the EN 15947 applies. The provisions of Directive 2007/23/EC were implemented into German legislation in October 2009 and numerous conformity assessment procedures (e.g. approval tests) of consumer fireworks have since been performed by the European notified body, BAM. This paper focuses on consumer fireworks and aims at giving an overview of the achieved results, such as observed failure rates, nonconformities depending on the fireworks types, findings of prohibited Chemicals, etc. A comparison with other published test results is presented as well. T2 - 14th International symposium on fireworks CY - Changsha, China DA - 14.10.2013 KW - Altitude measurement techniques KW - Measurement uncertainties KW - Standardisation PY - 2013 SN - 978-0-9867279-4-8 SN - 978-0-9867279-6-2 SP - 166 EP - 180 AN - OPUS4-29383 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Lüth, Peter A1 - Kurth, Lutz T1 - Ringversuch mit dem Fallhammer gemäß Abs. 1.6.2 Mechanische Empfindlichkeit (Schlag) der Methode A.14 Explosionsgefahr 2011 - Kurzbericht N2 - Ringversuche sind ein probates Mittel zur Bewertung der praktischen Anwendung einer Prüfmethode und der Leistungsfähigkeit von Prüflaboratorien. Bei der in diesem Ringversuch untersuchten Methode A.14 Explosionsgefahr handelt es sich um ein Prüfschema, um festzustellen, ob feste oder pastenförmige Stoffe bei Flammenzündung (thermische Empfindlichkeit) oder bei Einwirkung von Schlag oder Reibung (mechanische Empfindlichkeit) und ob Flüssigkeiten bei Flammenzündung oder bei Einwirkung von Schlag eine Explosionsgefahr im Sinne des nationalen und europäischen Chemikalienrechts (z.B. SprengG, REACH-VO, CLP-VO) darstellen. Der hier beschriebene Ringversuch behandelt die Prüfung mit dem Fallhammer gemäß Abs. 1.6.2 Mechanische Empfindlichkeit (Schlag) der Methode A.14 Explosionsgefahr. Angeregt wurde dieser Ringversuch von verschiedenen, nationalen Prüflaboratorien. Ein spezieller Auslöser war z.B. die Frage, ob vergleichbare Ergebnisse zwischen einer in einem Labor selbstgebauten Fallhammer-Apparatur und Geräten von kommerziellen Herstellern erzielt werden können. Es bestand die Frage nach einer entsprechenden Qualitätssicherung. Die praktischen Untersuchungen des hier vorgestellten Ringversuchs wurden im Zeitraum von September 2011 bis Januar 2012 durchgeführt. Die Auswertungsergebnisse und Schlussfolgerungen sind von der BAM auf einem Symposium mit Beteiligung der Ringversuchsteilnehmer vorgestellt und diskutiert worden. Der jetzt vorliegende Bericht berücksichtigt die Ergebnisse der Diskussion auf diesem Symposium. KW - Ringversuch KW - Fallhammer KW - Explosionsgefahr PY - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:b43-288561 SN - 978-3-9815748-6-9 SP - 1 EP - 43 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-28856 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kurth, Lutz A1 - Krebs, Holger A1 - Theil, Benjamin A1 - Mücke, Olaf A1 - Lohrer, Christian T1 - Assessment of explosives in squibs N2 - Experiments in this study reveal that the initiating capability ofcommonly used squibs is not high enough to initiate PETN in all cases. The fulfilment of the 'new ’ essential safety requirement 4 as set out in the European directive 2013/29/EU and the categorization of squibs as theatrical pyrotechnic articles (T2) can therefore be justified, as the explosive investigated belongs to quite a sensitive type (Initiation with low Impulse energiespossible). Underwater initiating capability tests according to EN 13763-15 led to meaningful results, showing that squibs are usually unable to initiate a secondary explosive. For a general assessment of the initiating capability of squibs and comparable (theatrical) pyrotechnic articles a threshold ränge of an equivalent initiation capability in grams of PETN on the basis of the performed underwater initiating capability tests was determined. It was found that squibs are generally not capable of initiating secondary explosives if the underwater initiating capability fest showed an equivalent Initiation capability below 0.25 g PETN. As a consequence of this result, the underwater initiating capability fest gives an effective and safer alternative to the experimental confirmation of the ‘new ’ESR 4 by direct contact of the article with the secondary explosive and should then be preferred to it. KW - Squibs KW - ESR 4 KW - PETN KW - Underwater initiating capability KW - EN 13763-15 PY - 2013 SN - 1082-3999 IS - 32 SP - 57 EP - 66 CY - Whitewater, Colo. AN - OPUS4-29660 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kurth, Lutz A1 - Lohrer, Christian T1 - Ausgewählte Probleme beim Abbrennen von Feuerwerk und Stand der Normung im Bereich Pyrotechnik T2 - 5. Informationstagung Sprengstoffe und Pyrotechnik, BAM CY - Berlin, Germany DA - 2010-05-06 PY - 2010 AN - OPUS4-21284 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dutschke, Andreas A1 - Seeger, Stefan A1 - Kurth, Lutz A1 - Panne, Ulrich A1 - Lohrer, Christian T1 - Emissions of reaction products and sound from outdoor and indoor firework displays N2 - This work presents results of investigations towards the emission of chemical reaction products and sound pressure during an outdoor and an indoor firework display. Potentially harmful and toxic gases, and aerosols, were measured as well as sound pressures. Aerosols were measured with a Differential Mobility Analyzer (DMA) as well as a Laser Particle Counter. The focus was on particles with diameters between 11 nm and 20 µm. A transportable Fourier Transform Infrared (FTIR) spectroscopy detector registered the concentrations of emitted reaction gases, simultaneously. During the outdoor firework display, peak particle concentrations of >550000 particles cm-3, equivalent to a mass concentration of approximately 3.95 mg m-3, were detected, revealing a concentration maximum at approximately 175 nm particle diameter. The time-averaged particle mass concentration did not exceed 1.58 mg m-3 over 15 minutes. Due to the large distances (110 m) to the firing points, no significant harmful or toxic gas concentrations were measured during the entire firework display. In contrast, concentrations of sulphur dioxide (SO2) rose after an indoor firework display in a large event hall. On two days, more than 23000 particles cm-3 (which equates to a mass concentration of approximately 0.41 mg m-3) were detected when the hall ventilation was turned off, and more than 11000 particles cm-3 (which equates to a mass concentration of approximately 1.18 mg m-3) when the hall ventilation was activated. Concentration maxima appeared at approximately 300 nm particle diameter. The time-averaged particle concentrations in this case did not exceed 0.56 mg m-3 (over 15 minutes). KW - Pyrotechnic articles KW - Aerosols KW - Combustion gases PY - 2009 SN - 1082-3999 IS - 28 SP - 78 EP - 93 CY - Whitewater, Colo. AN - OPUS4-20796 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kurth, Lutz A1 - Lohrer, Christian A1 - Fink, Heidrun T1 - QUALITY SYSTEMS FOR FIREWORKS - AUDITING EXPERIENCES BY THE NOTIFIED BODY BAM T2 - 13th International Symposium on Fireworks CY - Valletta, Malta DA - 2012-04-23 PY - 2012 AN - OPUS4-25821 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lohrer, Christian A1 - Kampa, Andreas A1 - Fink, Heidrun A1 - Kurth, Lutz A1 - Alef, G. T1 - Burst height measurements of spherical shells for different calibers and mortar lengths T2 - 13th International symposium on fireworks CY - Valletta, Malta DA - 2012-04-23 KW - Altitude measurement techniques KW - Measurement uncertainties KW - Standardisation PY - 2012 SN - 978-0-9867279-3-1 SP - 145 EP - 158 AN - OPUS4-25795 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lohrer, Christian A1 - Fink, Heidrun A1 - Kurth, Lutz T1 - Quality systems for fireworks - auditing experiences by the notified body BAM T2 - 13th International symposium on fireworks CY - Valletta, Malta DA - 2012-04-23 KW - 2007/23/EC KW - QS modules KW - Product safety PY - 2012 SN - 978-0-9867279-3-1 SP - 159 EP - 172 AN - OPUS4-25796 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kurth, Lutz T1 - Pyrotechnikrichtlinie 2007/23/EG - Behandlung von Großfeuerwerk der Kategorie 4 T2 - Informationsveranstaltung Sprengstoff und Pyrotechnik, BAM CY - Berlin, Germany DA - 2009-05-04 PY - 2009 AN - OPUS4-19269 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kurth, Lutz T1 - Regelung "Kleine Mengen" - Lagerung außerhalb eines nach § 17 SprengG genehmigten Lagers T2 - Informationsveranstaltung Sprengstoff und Pyrotechnik, BAM CY - Berlin, Germany DA - 2009-05-04 PY - 2009 AN - OPUS4-19270 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dutschke, Andreas A1 - Lohrer, Christian A1 - Seeger, Stefan A1 - Kurth, Lutz A1 - Schmidt, Martin A1 - Kaiser, Michael A1 - Stattaus, Kim A1 - Panne, Ulrich T1 - Determination of reaction products during a large firework display in Germany T2 - 11th International symposium on fireworks CY - Puerto Vallarta, México DA - 2009-04-20 KW - Firework display KW - Reaction products KW - Particles KW - Sound pressure PY - 2009 SN - 978-0-9734123-8-3 SP - 50 EP - 63 AN - OPUS4-19383 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dutschke, Andreas A1 - Lohrer, Christian A1 - Seeger, Stefan A1 - Kurth, Lutz T1 - Towards the reaction products of indoor fireworks T2 - 11th International symposium on fireworks CY - Puerto Vallarta, México DA - 2009-04-20 KW - Reaction products KW - Particles KW - Smoke gases KW - FTIR PY - 2009 SN - 978-0-9734123-8-3 SP - 66 EP - 79 AN - OPUS4-19384 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stattaus, Kim A1 - Kurth, Lutz A1 - Dutschke, Andreas A1 - Kästorf, Nadine A1 - Lohrer, Christian T1 - Impacts of various conditionings on performance parameters of category 4 fireworks shells T2 - 12th International symposium on fireworks CY - Porto/Gaia, Portugal DA - 2010-10-11 KW - Pre-normative research KW - Standardisation KW - Height measurements PY - 2010 SN - 978-0-9867279-0-0 SN - 978-0-9867279-1-7 SP - 290 EP - 300 AN - OPUS4-22179 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lutze, Romy A1 - Dutschke, Andreas A1 - Lohrer, Christian A1 - Kurth, Lutz T1 - Emission studies of the theatrical pyrotechnic articles under defined boundary conditions T2 - 12th International symposium on fireworks CY - Porto/Gaia, Portugal DA - 2010-10-11 KW - Aerosols KW - Combustion KW - FMPS KW - FT-IR PY - 2010 SN - 978-0-9867279-0-0 SN - 978-0-9867279-1-7 SP - 190 EP - 206 AN - OPUS4-22181 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Douet, Marianne A1 - Lohrer, Christian A1 - Kurth, Lutz A1 - Mücke, Olaf T1 - Safety related behavior of cylindrical shells N2 - The European Standard series EN 16261 consisting of four parts deals with the testing and assessment of display fireworks in order to satisfy the essential safety requirements of the Directive 2007/23/EC which have to be met before placing these articles on the EU market. The current Version of this Standard provides mortar dimension limits to be used for the assessment of burst heights of spherical Shells, but lacks corresponding provisions for cylindrical shells. The aim of this study was threefold: 1. To check whether the requirements for spherical shells would overlap with the ones for cylindrical shells, 2. To compare several test procedures for height measurements with each other to minimize the measurement uncertainty of the effect dimensions, and 3. To evaluate drift distances in order to check whether the current national provisions on safety distances for Professional fireworks displays need adaption during the implementation of the new European directive 2013/29/EU on pyrotechnics in German legislation. For this study, a large number of cylindrical shells was specifically manufactured to guarantee lull control on all relevant constructional aspects. These shells were designed with a smoke tracer and no burst Charge so that they would fall back to the ground in order to investigate their drift distances. Their gross mass corresponded to commercially available display shells, though, consisting of defined inert substances inside the shell. The following Parameters were varied in this study: caliber (75 mm, 100 mm, 150 mm), shell length per caliber (single and double length), lift Charge (hard and soft burst effect), mortar length per caliber (short and long). In total, more than 120 shells were manufactured and tested. Results show a good application of the proposed test procedures regarding the mortar dimensions given in the Standard series for cylindrical shells as well. The following test procedures were part of this study: Radar Doppler System, video grammetric System, universal surveying instruments, and mortar internal pressure measurements. Observed drift distances in relation to the caliber and effect heights are discussed and assessed. T2 - 15th International symposium on fireworks CY - Bordeaux, France DA - 21.09.2015 KW - Radar-Doppler KW - Height measurements KW - Drift effects KW - Safety distances PY - 2015 SN - 978-0-9867279-8-6 SP - 104 EP - 122 AN - OPUS4-34344 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kurth, Lutz T1 - Flame projectors for show effects - Investigations of thermal radiation for assessing safety distances N2 - The use of flames as part of shows is state of the art. Besides pyrotechnic flame projectors, the use of projectors that produce flames by burning various gases, liquids and dusts is significantly increasing. In this study infrared radiation in the wavelength range from 7.5 to 14 microns was measured for several systems (flame projectors) and set in relation to known human pain threshold levels. From this relation safety distances been determined for a static scenario (audience watching show) and compared with those of approved pyrotechnic articles. KW - Flame projectors KW - Thermal radiation KW - Safety distances PY - 2015 UR - http://www.jpyro.com/wp/?p=1771 SN - 1082-3999 IS - 34 SP - 31 EP - 36 CY - Whitewater, Colo. AN - OPUS4-35095 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kurth, Lutz T1 - Flammenanlagen für Show-Effekte - Untersuchungen der Wärmestrahlung zur Beurteilung von Schutzabständen N2 - Die Verwendung von Flammen im Rahmen von Shows ist heute Stand der Technik. Neben pyrotechnischen Flammenprojektoren kommen zunehmend Anlagen zum Einsatz, die Flammen durch die Verbrennung von Gasen, Flüssigkeiten und Stäube erzeugen. Die Infrarotstrahlung im Wellenlängenbereich von 7,5 bis 14 µm von verschiedenen Systemen (Flammenprojektoren) wurden gemessen und in Relation zu bekannten Grenzwerten für die gesundheitliche Schädigung von Personen gesetzt. Aus dieser Relation wurden dann Schutzabstände für ein statisches Szenario (Publikum verfolgt Show) bestimmt. KW - Flammenanlagen KW - Wärmestrahlung KW - Schmerzgrenzen KW - Schutzabstände PY - 2015 SN - 2191-0073 VL - 5 IS - 5 SP - 2 EP - 6 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-33205 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kurth, Lutz A1 - Krebs, Holger A1 - Theil, Benjamin A1 - Mücke, Olaf T1 - Untersuchungen zur Initiierung von Sekundärsprengstoffen N2 - In den Untersuchungen zum Zündvermögen von Filmeffektzündern wurde nachgewiesen, dass diese einen Plastiksprengstoff auf Basis von PETN nicht zu einer detonativen Umsetzung anregen können. Die Erfüllung der grundlegenden Sicherheitsanforderung (ESR) des Anhanges 1 der Richtlinie 2013/29/EG und die Kategorisierung als pyrotechnischer Gegenstand für Theater (T2) kann somit als gegeben angesehen werden, da der verwendete Explosivstoff zur Gruppe der sensibelsten Sprengstoffe (Initiierung mit geringen Zündenergien) gehört. Es wurde weiterhin nachgewiesen, dass der Untemassertest nach DIN EN 13763 Teil 15 aussagekräftige Ergebnisse liefert, welche die Fähigkeit von Filmeffektzündern und vergleichbaren pyrotechnischen Gegenständen bestätigen respektive widerlegen, einen Sekundärsprengstoff zu zünden (eine Detonation zu initiieren). Für eine allgemeine Einschätzung des Zündvermögens von Filmeffektzündern und vergleichbaren pyrotechnischen Gegenständen ist ein Grenzbereich für ein äquivalentes Zündvermögen in g PETN auf Basis der Experimente mit dem o. g. Unterwassertest bestimmt worden. Filmeffektzünder und vergleichbare pyrotechnische Gegenstände sind nicht in der Lage, einen Sekundärsprengstoff zur Detonation anzuregen, wenn das aus dem Unterwassertest ermittelte äquivalente Zündvermögen unter 0,25 g PETN liegt. T2 - 36. Informationstagung Sprengtechnik CY - Siegen, Germany DA - 25.04.2014 PY - 2015 SN - 0941-4584 VL - 36 IS - 3 SP - 20 EP - 24 PB - Deutscher Sprengverband CY - Siegen AN - OPUS4-32520 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lüth, Peter A1 - Brandes, E. A1 - Frost, K. A1 - Kurth, Lutz A1 - Schmidt, Martin A1 - Michael-Schulz, Heike A1 - Uhlig, S. T1 - CEQAT-DGHS Ringversuchsprogramm der BAM in Kooperation mit QuoData und PTB N2 - Bei der Bewertung der Verlässlichkeit der im Labor gewonnenen Prüfergebnisse spielen Ringversuche eine entscheidende Rolle. Die Bundesanstalt für Materialforschung und -prüfung (BAM) unterstützt deshalb den weiteren Ausbau des Ringversuchsprogramms des im Jahr 2007 gegründeten Kompetenzzentrums zur Qualitätssicherung für Prüfungen von Gefahrgütern und Gefahrstoffen auf physikalische Gefahren (Centre for quality assurance for testing of dangerous goods and hazardous substances, CEQAT-DGHS). Bei allen bisher untersuchten Prüfmethoden besteht ein Verbesserungsbedarf. Die RV müssen daher zunächst auf die Methodenentwicklung, -verbesserung und -validierung abzielen und nicht auf Leistungstests. T2 - 14. Kolloquium zur chemischen und physikalischen Sicherheitstechnik (BAM-PTB-Kolloquium) CY - Berlin, Germany DA - 14.06.2016 KW - Gefahrgut KW - Gefahrstoff KW - Ringversuch KW - Prüfmethode KW - Validierung KW - Qualitätssicherung PY - 2016 SN - 978-3-9817853-5-7 SN - 0938-5533 SP - 143 EP - 143 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-38464 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lüth, Peter A1 - Brandes, E. A1 - Frost, K. A1 - Kurth, Lutz A1 - Schmidt, Martin A1 - Michael-Schulz, Heike A1 - Uhlig, S. T1 - CEQAT-DGHS Ringversuchsprogramm für die Chemikaliensicherheit -Methodenvalidierung N2 - Bei der Bewertung der Verlässlichkeit der im Labor gewonnenen Prüfergebnisse spielen Ringversuche eine entscheidende Rolle. Die Bundesanstalt für Materialforschung und –prüfung (BAM) unterstützt deshalb den weiteren Ausbau des Ringversuchsprogramms des im Jahr 2007 gegründeten Kompetenzzentrums zur Qualitätssicherung für Prüfungen von Gefahrgütern und Gefahrstoffen auf physikalische Gefahren (Centre for quality assurance for testing of dangerous goods and hazardous substances, CEQAT-DGHS). Bei allen bisher untersuchten Prüfmethoden besteht ein Verbesserungsbedarf. Die RV müssen daher zunächst auf die Methodenentwicklung, -verbesserung und -validierung und auf die Bestimmung der Messunsicherheit der jeweiligen Prüfmethode abzielen und nicht auf Leistungstests. T2 - Behörden-Erfahungsaustausch CY - Berlin, Germany DA - 4. Juni 2018 KW - Prüfmethode KW - Methodenvalidierung KW - Gefahrgut KW - Gefahrstoff KW - Qualitätssicherung PY - 2018 AN - OPUS4-45297 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kurth, Lutz A1 - Krebs, Holger A1 - Lohrer, Christian A1 - Theil, Benjamin A1 - Mücke, Olaf T1 - Assessment of explosives in squibs N2 - Experiments in this study reveal that the initiating capability of commonly used squibs is not high enough to initiate PETN in all cases. The fulfilment of the ‘new’ essential safety requirement 4 as set out in the European directive 2013/29/EU and the categorization of squibs as theatrical pyrotechnic articles (T2) can therefore be justified, as the explosive investigated belongs to quite a sensitive type (Initiation with low impulse energies possible). Underwater initiating capability tests according to EN 13763-15 led to meaningful results, showing that squibs are usually unable to initiate a secondary explosive. For a general assessment of the initiating capability of squibs and comparable (theatrical) pyrotechnic articles a threshold range of an equivalent initiation capability in grams of PETN on the basis of the performed underwater initiating capability tests was determined. It was found that squibs are generally not capable of initiating secondary explosives if the underwater initiating capability test showed an equivalent Initiation capability below 0.25 g PETN. As a consequence of this result, the underwater initiating capability test gives an effective and safer alternative to the experimental confirmation of the ‘new’ ESR 4 by direct contact of the article with the secondary explosive and should then be preferred to it. KW - Squibs KW - ESR 4 KW - PETN KW - Underwater initiating capability KW - Pyrotechnic PY - 2013 SN - 1082-3999 IS - 32 SP - 57 EP - 66 PB - Journal of Pyrotechnics Inc. CY - Whitewater, CO 81527 USA AN - OPUS4-48207 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schwarz, Silke A1 - Kurth, Lutz T1 - Wege zur richtigen Beurteilung von Gefährdungen - Unfalluntersuchung eines schwarzpulverähnlichen Reinigungspulvers N2 - Bei der Explosion in einer Herstellungsstätte für ein Pulver zur Reinigung industrieller Feuerungsanlagen ist eine Person tödlich verunglückt. Die BAM wurde gebeten, beschlagnahmte Muster des Reinigungspulvers zu bewerten. Dafür wurden verschiedene Untersuchungen durchgeführt. Diese sollten klären, ob die stoffliche Einstufung des Reinigungspulvers in die Klasse 5.1 für die sichergestellten Pulverproben zutreffend ist. Es konnte nachgewiesen werden, dass die untersuchten Pulverproben explosionsgefährliche Eigenschaften aufweisen und der Klasse 1 zuzuordnen sind. Die weiterführende Gefährdungsbeurteilung erfolgte anhand neu eingeführter sicherheitstechnischer Kenndaten Kriterien und der daraus abgeleiteten Gefahrgruppe. KW - Gefährdung KW - Kenndaten KW - Gefahrgruppen PY - 2020 SN - 0941-4584 IS - 2 SP - 15 EP - 21 PB - Deutscher Sprengverband CY - Siegen AN - OPUS4-51146 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kurth, Lutz T1 - "Kalte" Pyrotechnik - Raucharmsuggestion oder Fortschritt? N2 - Die Verwendung pyrotechnischer Gegenstände in Menschenmengen (u. a. in Fußballstadien) hat in den letzten Jahren stark zugenommen. Zur Verwendung gelangen vorrangig sonstige pyrotechnische Gegenstände der Kategorie P1. Diese Gegenstände sind frei verkäuflich für Personen ab einem Alter von 18 Jahren. Am häufigsten werden pyrotechnische Gegenstände verwendet, die Rauch und Licht in verschiedenen Farben erzeugen. T2 - 28. Sitzung des nationalen Ausschusses für Sport und Sicherheit (NASS) CY - Düsseldorf, Germany DA - 16.10.2019 KW - Raucharm KW - Kalte Pyrotechnik KW - Wärme PY - 2019 AN - OPUS4-50055 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kurth, Lutz T1 - Flame projectors for shof effects-Investigations of thermal radiation for assessing safety distances N2 - The use of flames as part of shows is state of the art. Besides pyrotechnic flame projectors, the use of projectors that produce flames by burning various gases, liquids and dusts is significantly increasing. In this study infrared radiation in the wavelength range from 7.5 to 14 microns was measured for several systems (flame projectors) and set in relation to known human pain threshold levels. From this relation safety distances been determined for a static scenario (audience watching show) and compared with those of approved pyrotechnic articles. KW - Safety distance KW - Thermal radiation KW - Flame projector PY - 2015 SN - 1082-3999 VL - 2015 IS - 34 SP - 31 EP - 36 PB - Journal of Pyrotechnics Inc. CY - Whitewater, CO 81527 USA AN - OPUS4-50054 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kurth, Lutz ED - Kurth, Lutz T1 - Flammenanlagen für Show-Effekte N2 - Die Verwendung von Flammen im Rahmen von Shows ist heute Stand der Technik. Neben pyrotechnischen Flammenprojektoren kommen zunehmend Anlagen zum Einsatz, die Flammen durch die Verbrennung von Gasen, Flüssigkeiten und Stäube erzeugen. Es wurde die Infrarotstrahlung im Wellenlängenbereich von 7,5 – 14 µm der verschiedenen Systeme (Flammenprojektoren) gemessen und in Relation zu bekannten Grenzwerten für die gesundheitliche Schädigung von Personen gesetzt. Aus dieser Relation sind dann Schutzabstände für ein statisches Szenario (Publikum verfolgt Show) bestimmt worden. KW - Schutzabstände KW - Wärmestrahlung KW - Flammenprojektoren KW - Schmerzgrenze PY - 2015 SN - 2191-0073 VL - 5 IS - 5 SP - 1 EP - 5 PB - Technische Sicherheit CY - Düsseldorf AN - OPUS4-48093 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kurth, Lutz T1 - Determination of measures for a safe production depending on the hazardous properties of explosive substances (pyrotechnic compositions) N2 - During manufacturing and production processes of pyrotechnic compositions, semi-finished devices and regular pyrotechnic articles an inadvertent reaction or even explosion cannot be fully excluded. The optimization of the design of the involved single work processes can only reduce the risk of such a scenario. For doing so, one must consider the respective properties regarding thermal, mechanical, chemical and electrostatic sensitivities of the compositions being processed. One major key parameter in reducing the risks of such an event is to minimize the consequences, if the likelihood of this event cannot be further reduced. Minimizing the consequences in cases of unintended explosions during production processes comprises of construction measures regarding buildings (different walls, orientation etc.), increasing safety distances to other buildings, and lowering the maximum net explosive masses and the number of people per room or production process. Important criteria for defining and setting protection measures are the so-called ‘hazard groups’ (in German ‘Gefahrgruppen’), net explosive masses and the main impacts or hazards (such as blast pressure, heat/radiation and debris). This paper aims at presenting some approaches used in Germany to minimize the impacts of possible reactions or inadvertent explosions during production processes of pyrotechnic compositions and articles in work spaces. This includes also the determination of safety distances and discussions on reducing thermal impacts. T2 - 17th International Symposium on Fireworks CY - Puerto Vallarta, Mexico DA - 06.05.2019 KW - Hazard group KW - Explosions KW - Manufacturing KW - Pyrotechnic KW - Safety PY - 2019 SN - 978-1-988778-05-1 VL - 2019 SP - 202 EP - 216 AN - OPUS4-48032 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kurth, Lutz T1 - The assessment of the dangerous characteristics of pyrotechnic Composition and articles (for safe production) N2 - To minimize hazards during manufacturing and production processes of pyrotechnic compositions, semifinished and regular pyrotechnic articles, related properties of the pyrotechnic compositions must be determined and assessed with focus on those parameters that influence the exothermic reactions and explosion phenomena. Estimated impacts of these reactions as well as the sensitivities towards Initiation by thermal, mechanical or electrostatic stresses are relevant for this assessment. Since the 50s of the last century so-called ‘Hazard Groups’(in German ‘Gefahrgruppen’) of pyrotechnic compositions were defined, to assess these properties which aim was to set appropriate safety measures for production purposes. This system of Hazard Groups is currently under review to determine if they are still relevant with the latest composition developments in this field and still represent the state of the art. Several necessary changes and new approaches have already been identified. The new system will contain the following Hazard Groups, all with associated protection measures: 1.1 (and further sub-groups 1.1-1, 1.1-2 and 1.1-3), 1.2, 1.3 and 1.4. This structure is aligned to the international principles for the classification of such substances according to the TDG and GHS regulations. New or updated test and assessment criteria for these (sub-) groups are under development, and comprise of aspects such as sensitivity towards friction, impact, temperature and explosion effects. This paper aims at giving an overview of this system of hazard Groups in Germany to optimize production safety including pyrotechnic compositions. An overview of this system is given along with example cases for testing and assessment, including a short differentiation of the energetic processes during the reactions. T2 - 17th International Symposium on Fireworks CY - Puerto Vallarta, Mexico DA - 06.05.2019 KW - Sensitivities KW - Pyrotechnic KW - Assessment KW - Explosion phenomena PY - 2019 SN - 978-1-988778-05-1 VL - 2019 SP - 217 EP - 228 AN - OPUS4-48035 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lüth, Peter A1 - Frost, K. A1 - Kurth, Lutz A1 - Malow, Marcus A1 - Schmidt, Martin A1 - Michael-Schulz, Heike A1 - Uhlig, S. A1 - Zakel, S. T1 - CEQAT-DGHS Ringversuchsprogramm für die Chemikaliensicherheit - Schlussfolgerungen N2 - Die Ursachen für Chemikalienunfälle können vielfältig sein. Prävention beginnt bereits im Prüflabor, wenn Chemikalien auf ihre gefährlichen Eigenschaften getestet werden. Dazu sind Prüfmethoden entwickelt und veröffentlicht worden, die heute weltweit Anwendung finden. Auf die Validität der Prüfmethode und richtige Durchführung der Prüfung im Laboratorium müssen sich Sicherheitsfachkräfte, Transporteure oder Händler verlassen können. Anhand der in den letzten 10 Jahren im Rahmen des CEQAT-DGHS von BAM und PTB durchgeführten Ringversuche (RV) wird gezeigt, dass bei allen bisher untersuchten Prüfmethoden ein Verbesserungsbedarf besteht. Die RV müssen daher zunächst auf die Methodenverbesserung und -validierung abzielen und nicht auf Leistungstests. Das Labormanagement und die praktische Durchführung der Prüfung sind in vielen Laboratorien verbesserungsbedürftig. Der Begriff „Erfahrung der Prüfer“ ist kritisch zu sehen: Eine „lange Erfahrung mit vielen Prüfungen“ ist nicht unbedingt ein Garant für richtige Ergebnisse. T2 - 15. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Braunschweig, Germany DA - 21.05.2019 KW - Gefahrgut KW - Gefahrstoff KW - Ringversuch KW - Prüfmethode KW - Validierung KW - Qualitätssicherung PY - 2019 UR - https://www.ptb.de/cms/index.php?id=18763 U6 - https://doi.org/10.7795/210.20190521M SP - 1 EP - 8 PB - Physikalisch-Technische Bundesanstalt (PTB) CY - Braunschweig AN - OPUS4-49489 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kurth, Lutz A1 - Schwarz, Silke T1 - Vorsicht bei der Reinigung von Feuerstätten! N2 - Bei der Explosion in einer Herstellungsstätte für ein Pulver zur Reinigung industrieller Feuerungsanlagen in Deutschland ist eine Person tödlich verunglückt. Die BAM wurde gebeten, beschlagnahmte Muster des Reinigungspulver zu bewerten. Dafür wurden verschiedene Untersuchungen durchgeführt. Diese sollten klären, ob die stoffliche Einstufung des Reinigungspulvers in die Stoffklasse 5.1 für die sichergestellten Pulverproben zutreffend ist. Es konnte nachgewiesen werden, dass die untersuchten Pulverproben explosionsgefährliche Eigenschaften aufweisen. Die von explosionsgefährlichen Stoffen ausgehenden Gefährdungen müssen ermittelt und bei der Herstellung und Verwendung berücksichtigt werden. Die Gefährdungen sind entsprechend neu eingeführter sicherheitstechnischer Kennzahlen ermittelt und anschließend klassifiziert worden. Die Klassifizierung erfolgte durch die Zuordnung zu einer s.g. Gefahrgruppe. KW - Gefahrgruppen KW - Schwarzpulverähnliches Reinigungspulver KW - Explosionsgefährliche Eigenschaften PY - 2019 SN - 2191-007 VL - 11/12 SP - 16 EP - 20 PB - VDI Fachmedien CY - Düsseldorf AN - OPUS4-49987 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lüth, Peter A1 - Frost, K. A1 - Kurth, Lutz A1 - Malow, Marcus A1 - Schmidt, Martin A1 - Michael-Schulz, Heike A1 - Uhlig, S. A1 - Zakel, S. T1 - CEQAT-DGHS Ringversuchsprogramm für die Chemikaliensicherheit – Entwicklung von Verfahren zur Verifizierung der Prüfapparatur am Beispiel der Prüfmethode UN Test N.5 N2 - Prävention beginnt im Prüflabor, wenn Chemikalien auf ihre gefährlichen Eigenschaften getestet werden. Dazu sind Prüfmethoden entwickelt und veröffentlicht worden, die heute weltweit Anwendung finden. Auf die Validität der Prüfmethode und richtige Durchführung der Prüfung im Laboratorium müssen sich Sicherheitsfachkräfte, Transporteure oder Händler verlassen können. Anhand der in den letzten 10 Jahren im Rahmen des CEQAT-DGHS von BAM und PTB durchgeführten Ringversuche (RV) wird gezeigt, dass bei allen bisher untersuchten Prüfmethoden ein Verbesserungsbedarf besteht. Die RV müssen daher zunächst auf die Methodenverbesserung und -validierung abzielen und nicht auf Leistungstests. Das Labormanagement und die praktische Durchführung der Prüfung sind in vielen Laboratorien verbesserungsbedürftig. Der Begriff „Erfahrung der Prüfer“ ist kritisch zu sehen: Eine „lange Erfahrung mit vielen Prüfungen“ ist nicht unbedingt ein Garant für richtige Ergebnisse. Bei der Prüfung der gefährlichen Eigenschaften von Chemikalien sind Referenzmaterialen auf Grund der Instabilität in der Regel nicht verfügbar. Für Prüflaboratorien sind RV daher eine Alternative bei der Qualitätssicherung. RV sind jedoch aufwendig und können nur in relativ großen Zeitabständen durchgeführt werden. Es sind deshalb Verfahren zur Verifizierung z. B. der in den Laboratorien verwendeten Prüfapparaturen zu entwickeln. Die Entwicklung von Verifizierungsverfahren wird am Bespiel der Prüfmethode UN Test N.5 demonstriert. T2 - 15. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Braunschweig, Germany DA - 21.05.2019 KW - Gefahrgut KW - Gefahrstoff KW - Ringversuch KW - Prüfmethode KW - Validierung KW - Qualitätssicherung KW - Verifizierung PY - 2019 UR - https://www.ptb.de/cms/index.php?id=18763 U6 - https://doi.org/10.7795/210.20190521E SP - 1 EP - 10 CY - Braunschweig AN - OPUS4-49495 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lüth, Peter A1 - Frost, K. A1 - Kurth, Lutz A1 - Malow, Marcus A1 - Michael-Schulz, Heike A1 - Schmidt, Martin A1 - Schulte, Petra A1 - Uhlig, S. A1 - Zakel, S. T1 - CEQAT-DGHS Interlaboratory Test Programme for Chemical Safety - Need of Test Methods Validation N2 - Safety experts, manufacturers, suppliers, importers, employers or consumers must be able to rely on the validity of safety-related test methods and on correct test results and assessments in the laboratory. Via the eChemPortal lots of data from the REACH registration dossiers are available. However, the quality and correctness of the information remains in the responsibility of the data submitter. Unfortunately, we found more or less appropriate information on physicochemical properties and concluded that more quality or adequacy of any data submitted will be needed. Interlaboratory tests play a decisive role in assessing the reliability of test results. Interlaboratory tests on different test methods have been performed by Bundesanstalt für Materialforschung und –prüfung (BAM) and Physikalisch-Technische Bundesanstalt (PTB) in collaboration with the QuoData GmbH during the last 10 years. Significant differences between the results of the participating laboratories were observed in all interlaboratory tests. The deviations of the test results were not caused only by laboratory faults but also by deficiencies of the test method. In view of the interlaboratory test results the following conclusions can be drawn: • To avoid any discrepancy on classification and labelling of chemicals it should become state of the art to use validated test methods and the results accompanied by the measurement uncertainty. • A need for improvement is demonstrated for all examined test methods. Thus, interlaboratory tests shall initially aim at the development, improvement and validation of the test methods and not on proficiency tests. • The laboratory management and the practical execution of the tests need to be improved in many laboratories. • The term "experience of the examiner" must be seen critically: A "long experience with many tests" is not necessarily a guarantee for correct results. T2 - 16th International Symposium on Loss Prevention and Safety Promotion in the Process Industries and accompanying exhibition. Loss prevention 2019 CY - Delft, The Netherlands DA - 16.06.2019 KW - Dangerous goods KW - Hazardous substances KW - Round robin test KW - Interlaboratory comparison KW - Test method KW - Validation KW - Quality assurance PY - 2019 UR - https://www.aidic.it/cet/19/77/001.pdf SN - 978-88-95608-74-7 U6 - https://doi.org/10.3303/CET1977001 SN - 2283-9216 VL - 77 SP - 1 EP - 6 PB - Italian Association of Chemical Engineering AN - OPUS4-49496 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lüth, Peter A1 - Brandes, E. A1 - Frost, K. A1 - Kurth, Lutz A1 - Schmidt, Martin A1 - Michael-Schulz, Heike A1 - Uhlig, S. T1 - CEQAT-DGHS Ringversuchsprogramm für die Chemikaliensicherheit – Methodenvalidierung N2 - Bei der Bewertung der Verlässlichkeit der im Labor gewonnenen Prüfergebnisse spielen Ringversuche eine entscheidende Rolle. Die Bundesanstalt für Materialforschung und –prüfung (BAM) unterstützt deshalb den weiteren Ausbau des Ringversuchsprogramms des im Jahr 2007 gegründeten Kompetenzzentrums zur Qualitätssicherung für Prüfungen von Gefahrgütern und Gefahrstoffen auf physikalische Gefahren (Centre for quality assurance for testing of dangerous goods and hazardous substances, CEQAT-DGHS). Bei allen bisher untersuchten Prüfmethoden besteht ein Verbesserungsbedarf. Die RV müssen daher zunächst auf die Methodenentwicklung, -verbesserung und -validierung und auf die Bestimmung der Messunsicherheit der jeweiligen Prüfmethode abzielen und nicht auf Leistungstests. T2 - 13. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 16.11.2017 KW - Gefahrgut KW - Gefahrstoff KW - Ringversuch KW - Prüfmethode KW - Validierung KW - Qualitätssicherung PY - 2017 SN - 978-3-96057-032-5 SP - 1 EP - 13 CY - Köthen AN - OPUS4-43299 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dutschke, Andreas A1 - Lohrer, Christian A1 - Seeger, Stefan A1 - Kurth, Lutz T1 - Gasförmige und feste Reaktionsprodukte beim Abbrand von Indoor-Feuerwerk N2 - Beim Abbrand einzelner Feuerwerkskörper für den Indoor-Bereich wurden als gasförmige Hauptreaktionsprodukte unter anderem CO2, CO, COS, nitrose Gase, diverse Kohlenwasserstoffe und Schwefelverbindungen (teilweise in sehr hohen Konzentrationen) mit Hilfe der FTIR-Spektroskopie nachgewiesen. Zusätzliche Feinstaubmessungen parallel zum Abbrand in einem großen Raum illustrierten die zeitweise hohen Partikelkonzentrationen an unterschiedlichen Messpunkten. KW - Feinstaub KW - FTIR-Spektroskopie KW - Gase KW - Indoor-Feuerwerk KW - Kohlenwasserstoffe KW - Schwefelverbindungen PY - 2009 U6 - https://doi.org/10.1002/cite.200800122 SN - 0009-286X SN - 1522-2640 VL - 81 IS - 1-2 SP - 167 EP - 175 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-18745 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dutschke, Andreas A1 - Lohrer, Christian A1 - Kurth, Lutz A1 - Seeger, Stefan A1 - Barthel, Mathias A1 - Panne, Ulrich T1 - Aerosol emissions from outdoor firework displays N2 - The results of investigations on the emission of particulate matter from three outdoor firework displays are presented. During these events, possibly harmful and toxic aerosol emissions were measured. Aerosols in the size range from 30 to 450 nm were detected. The maxima in the observed particle size distribution were between 80 and 175 nm, and the highest value determined was ~1.3 · 106 particles per cm³, while the highest mass concentration was approximately 1.8 mg m–3. The time-averaged particle mass concentration did, however, not exceed 0.7 mg m–3 (over 15 min). KW - Firework display KW - Particle size range KW - Particulate matter KW - Threshold values PY - 2011 U6 - https://doi.org/10.1002/ceat.201100080 SN - 0930-7516 SN - 1521-4125 VL - 34 IS - 12 SP - 2044 EP - 2050 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-24929 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -