TY - JOUR A1 - Shaik, A.-A. A1 - Richter, M. A1 - Kricheldorf, H. A1 - Krüger, Ralph-Peter T1 - New polymer syntheses - CIX. Biodegradable, alternating copolyesters of terephthalic acid, aliphatic dicarboxylic acids, and alkane diols N2 - Copolyesters with an alternating sequence of terephthalic acid and aliphatic dicarboxylic acids were prepared with three different methods. First, dicarboxylic acid dichlorides were reacted with bis(2-hydroxyethyl)terephthalate (BHET) in refluxing 1,2-dichlorobenzene. Second, the same monomers were polycondensed at 0-20 °C in the presence of pyridine. Third, dicarboxylic acid dichlorides and silylated BHET were polycondensed in bulk. Only this third method gave satisfactory molecular weights. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry revealed that the copolyesters prepared by the pyridine and silyl methods might have contained considerable fractions of cyclic oligoesters and polyesters despite the absence of transesterification and backbiting processes. The alternating sequences and thermal properties were characterized with 1H NMR spectroscopy and differential scanning calorimetry measurements, respectively. In agreement with the alternating sequence, all copolyesters proved to be crystalline, but the crystallization was extremely slow [slower than that of poly(ethylene terephthalate)]. A second series of alternating copolyesters was prepared by the polycondensation of silylated bis(4-hydroxybut- yl)terephthalate with various aliphatic dicarboxylic acid dichlorides. The resulting copolyesters showed significantly higher rates of crystallization, and the melting temperatures were higher than those of the BHET-based copolyesters. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3371-3382, 2001 KW - Poly(ethylene terephthalate) KW - Poly(butylene terephthalate) KW - Alternating sequence KW - Macrocycles KW - Crystallization KW - Biodegradable polyesters PY - 2001 DO - https://doi.org/10.1002/pola.1320 SN - 0360-6376 SN - 0887-624X VL - 39 IS - 19 SP - 3371 EP - 3382 PB - Wiley CY - Hoboken, NJ AN - OPUS4-2173 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bünger, H. A1 - Krüger, Ralph-Peter A1 - Pietschmann, S. A1 - Wüstneck, N. A1 - Kaufner, L. A1 - Tschiersch, R. A1 - Pison, U. T1 - Two hydrophobic protein fractions of ovine pulmonary surfactant: Isolation, characterisation and biophysical activity N2 - Pulmonary surfactant contains two extremely hydrophobic proteins, SP-B and SP-C. We present a novel HPLC method for the preparation of these hydrophobic proteins. It is based on size-exclusion chromatography using the apolar stationary-phase butyl silica gel and isocratic elution with acidified chloroform/methanol. Samples for HPLC were prepared from sheep lung lavage fluid by centrifugation and extraction with chloroform/methanol. Amino acid analyses of the two protein fractions revealed sequences that are consistent with SP-B and SP-C, respectively. MALDI-TOF-MS analyses of the SP-B fraction showed one major peak of dimeric SP-B with m/z 17,361, and additional peaks of monomeric and oligomeric forms, which are predominantly even numbered. The SP-C fraction showed a peak at m/z 4200, consistent with the theoretical mass of the dipalmitoylated form of this protein. The biophysical activity of pure sheep SP-B and SP-C was evaluated by measuring the surface tension using axisymmetric drop shape analysis for captive bubbles. We found distinct surface pressure versus surface area isotherms of SP-B and SP-C indicating different biophysical activities for these surfactant proteins. The new preparative HPLC method is able to replace the established, time-consuming low-pressure liquid chromatography method for the isolation of SP-B and SP-C from lipids. KW - Surfactant proteins KW - SP-B KW - SP-C KW - Preparative HPLC KW - MALDI-TOF-MS KW - Surface pressure KW - Captive bubble PY - 2001 DO - https://doi.org/10.1006/prep.2001.1510 SN - 1046-5928 SN - 1096-0279 VL - 23 IS - 2 SP - 319 EP - 327 PB - Elsevier CY - Amsterdam AN - OPUS4-2174 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Czichocki, G. A1 - Heger, R. A1 - Much, Helmut A1 - Krüger, Ralph-Peter A1 - Goedel, W.A. T1 - Synthesis of Polyisoprenes with Sulfonate Head Groups and their Purification by HPLC PY - 2001 SN - 0932-3414 SN - 0040-3490 VL - 38 IS - 3 SP - 168 EP - 172 PB - Hanser CY - München AN - OPUS4-2175 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kricheldorf, H.R. A1 - Böhme, S. A1 - Schwarz, G. A1 - Krüger, Ralph-Peter A1 - Schulz, Günter T1 - Macrocycles 18. The Role of Cyclization in Syntheses of Poly(ether-sulfone)s N2 - Poly(ether-sulfone)s having an identical backbone were prepared by four different methods. First, silylated bisphenol A (BSBA) was polycondensed with 4,4'-difluorodiphenyl sulfone (DFDPS) and K2CO3 in N-methylpyrrolidone with variation of the temperature. Second, analogous polycondensation were conducted using CsF as catalyst (and no K2CO3). Third, CsF-catalyzed polycondensations BSBA and DFDPS were conducted in bulk up to 290 C. Fourth, free bisphenol was polycondensed with DFDPS or 4,4'-dichlorodiphenyl sulfone and K2CO3 in DMSO with azeotropic removal of water. MALDI-TOF mass spectroscopy revealed that the first method mainly yielded cyclic poly(ether-sulfone)s which were detected up to masses around 13 000 Da. These and other results suggest that these polycondensations take a kinetically kontrolled course at tempeatures 145 C. This interpretation is also valid for the fourth method where high yields of cycles were obtained with DFDPS. With the less reactive 4,4'-dichlorodiphenyl sulfone lower conversions, lower molecular weights and lower fractions of cycles were found. In contrast to KF (resulting from K2CO3) CsF cleaves the poly(ether sulfone) backbone at temperatures > 145 C. Smaller amounts of smaller cycles were found in these CsF-catalyzed polycondensations which were in this case the result of thermodynamically controlled "back-biting degradation". PY - 2001 DO - https://doi.org/10.1021/ma010218l SN - 0024-9297 SN - 1520-5835 VL - 34 SP - 8886 EP - 8893 PB - American Chemical Society CY - Washington, DC AN - OPUS4-2176 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kricheldorf, H.R. A1 - Rabenstein, M. A1 - Langanke, D. A1 - Schwarz, G. A1 - Schmidt, M. A1 - Maskos, M. A1 - Krüger, Ralph-Peter T1 - Ring-closing polycondensations N2 - The role of cyclization in polycondensations is discussed for two different scenarios: thermodynamically-controlled polycondensation (TCPs) on the one hand and kinetically-controlled polycondensations (KCPs) on the other. The classical Carothers–Flory theory of step-growth polymerization does not include cyclization reactions. However, TCPs involve the formation of cycles via ‘back-biting degradation’, and when the ring–chain equilibrium is on the side of the cycles the main reaction products of the TCP will be cyclic oligomers. Two groups of examples are discussed: polycondensations of salicyclic acid derivatives (e.g. aspirin) and polycondensations of dibutyltin derivatives with long {alpha}-, {omega}-diols or dicarboxylic acids. Furthermore, various kinetically-controlled syntheses of polyesters and polyamides were studied and carefully optimized in the direction of high molecular weights. High fractions of cyclic oligomers and polymers were found by MALDI-TOF mass spectrometry, and their fractions increased with optimization of the process for molecular weight. These results disagree with the Carothers–Flory theory but agree with the theoretical background of the Ruggli–Ziegler dilution method (RZDM). When poly(ether-sulfone)s were prepared from 4,4'-difluorodiphenylsulfone and silylated bisphenol-A two different scenarios were found. With CsF as catalyst at a temperature of more than 145°C cyclic oligoethers were formed under thermodynamic control. When the polycondensation was promoted with K2CO3 in N-methylpyrolidone at ?145°C the formation of cyclic oligoethers and polyethers occurred under kinetic control. A new mathematical formula is presented correlating the average degree of polymerization with the conversion and taking into account the competition between cyclization and propagation. PY - 2001 DO - https://doi.org/10.1088/0954-0083/13/2/312 SN - 0954-0083 SN - 1361-6412 VL - 13 SP - S123 EP - S136 PB - Sage Publ. CY - London AN - OPUS4-2178 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Janiak, Ch. A1 - Lange, K.C.H. A1 - Marquardt, P. A1 - Krüger, Ralph-Peter A1 - Hanselmann, R. T1 - Analyses of Propene and 1-Hexene Oligomers from Zirconocene/MAO Catalysts - Mechanistic Implications by NMR, SEC and MALDI-TOF MS N2 - A series of Cp(C5H5)ZrCl2 and Cp2ZrCl2 pre-catalysts (Cp = C5HMe4, C4Me4P, C5Me5, C5H4tBu, C5H3-1,3-tBu2, C5H2-1,2,4-tBu3) together with (C5H5)2ZrCl2 was used for the directed oligomerization of propene and 1-hexene in comparative experiments. Oligomer characterization was carried out by 1H NMR, SEC (GPC), MALDI-TOF MS, cryoscopy and Raman spectroscopy. From 1H NMR the nature and relative ratio of the double-bond end group is determined together with n if every oligomer molecule contains such a double-bond end group. Normally vinylidene double bonds (from -hydrogen elimination) are found. From 1H NMR and MALDI-TOF MS also vinyl end groups (from -methyl elimination) are observed in the case of oligopropenes with (C4Me4P)- (C5H5)ZrCl2 and with the symmetrical methyl containing Cp2ZrCl2 pre-catalysts. The vinylidene/vinyl ratio depends on the ligand and increases from C5HMe4 (65/35) over C4Me4P (61/39) to C5Me5 (9/91). A comparison of n from 1H NMR and SEC together with MALDI-TOF MS shows that the phospholyl-zirconocenes and (C5HMe4)2ZrCl2 also exhibit chain transfer to aluminium, thereby giving saturated oligomers. KW - Chain transfer KW - MALDI KW - Metallocene catalysts KW - Oligomers KW - Polyolefins PY - 2002 DO - https://doi.org/10.1002/1521-3935(20020101)203:1<129::AID-MACP129>3.0.CO;2-C SN - 1022-1352 SN - 1521-3935 VL - 203 IS - 1 SP - 129 EP - 138 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-2179 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Veith, M. A1 - Elsässer, R. A1 - Krüger, Ralph-Peter T1 - Synthesis of Dendrimers with a N-Si-C Framework N2 - A novel family of air-stable dendrimers with a N-Si-C framework has been prepared up to the fourth generation. The divergent synthesis starts with the hydrosilylation of the trisilazane N(SiMe2vinyl)3 [0-G(vinyl)] by HSiMe2Cl, which gives the three-directional core molecule N(SiMe2CH2CH2SiMe2Cl)3 [0-G(Cl)]. A 1-to-2 branching achieved by reacting the core molecule [0-G(Cl)] with 3 equiv of KN(SiMe2vinyl)2 affords the first generation dendrimer [1-G(vinyl)]. By repeating the above two steps, the second [2-G(vinyl)], third [3-G(vinyl)], and fourth generation [4-G(vinyl)] can be obtained. The compounds have been characterized by 1H, 13C, and 29Si NMR spectroscopy, by elemental analysis, and up to the third generation by MALDI-TOF mass spectrometry. Gel permeation chromatography was used to prove the fourth generation [4-G(vinyl)]. PY - 1999 DO - https://doi.org/10.1021/om9807708 SN - 0276-7333 SN - 1520-6041 VL - 18 IS - 4 SP - 656 EP - 661 PB - American Chemical Society CY - Washington, DC AN - OPUS4-2162 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krüger, Ralph-Peter A1 - Much, Helmut A1 - Schulz, Günter A1 - Rikowski, E. T1 - Zur Charakterisierung von Si-Polymeren durch flüssigchromatographische Verfahren in Kopplung mit der MALDI-TOF-MS N2 - Summary. The coupling of the three liquid chromatographic modes with MALDI-TOF mass spectrometry is suitable for the determination of the molecular, functional, and chemical heterogeneities of Si polymers. Silsesquioxanes and siloxanes serve as examples for this method of structure identification. The substance specific construction of the SEC calibration curve by means of MALDI-MS is shown. Zusammenfassung. Die Kopplung der drei flüssigchromatographischen Modi mit MALDI-TOF-Massenspektrometrie ist zur Bestimmung der molekularen, funktionalen und chemischen Verteilungen von Si-Polymeren geeignet. Silsesquioxane und Siloxane dienen als Beispiele für diese Art der Strukturerkennung. Die substanzspezifische Konstruktion einer SEC-Eichkurve mit Hilfe der MALDI-MS wird gezeigt. KW - Si polymer characterization KW - LC/MALDI-TOF-MS PY - 1999 DO - https://doi.org/10.1007/PL00010162 SN - 0026-9247 SN - 1434-4475 VL - 130 IS - 1 SP - 163 EP - 174 PB - Springer CY - Wien AN - OPUS4-2163 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kricheldorf, H.R. A1 - Eggerstedt, S. A1 - Krüger, Ralph-Peter T1 - Macrocycles, 6a / MALDI-TOF mass spectrometry of tin-initiated macrocyclic polylactones in comparison to classical mass-spectroscopic methods PY - 1999 SN - 1022-1352 SN - 1521-3935 VL - 200 IS - 6 SP - 1284 EP - 1291 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-2166 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kricheldorf, H. A1 - Hauser, K. A1 - Krüger, Ralph-Peter A1 - Schulz, Günter T1 - Macrocycles 12. Ring-Opening Polycondensations of Tin-Containing Macrocycles with Bis(Thioarylester)s N2 - 2,2-Dibutyl-2-stanna-1,3-dioxepane (DSDOP) was polycondensed with bis(4-chlorothiophenyl) suberat under various reaction conditions, but only moderate molecular weights (Mn 10000) were obtained. The MALDI-TOF mass spectrosmetry revealed the formation of cyclic oligo- and polyesters in addition to linear species having OH, CO2H, and unreacted 4-chlorothiophenyl ester endgroups. Furthermore, -Caprolactone (-CL) was polymerized with DSDOP as the initiator at monomer/initiator (M/I) ratios of 20 and 50. The resulting tin-containing macrocyclic polylactones were reacted with sebacic acid bis(4-thiocresyl)ester at three different temperatures and with different reaction times. Analogous polycondensations were conducted with suberic acid bis(4-chlorothiophenyl) ester. The presence of thioarylester endgroups in the isolated polyesters was checked by 1H NMR spectroscopy. The highest conversions were found at long reaction times (24 or 72 hours), or after the addition of pyridine and N,N-dimethylaminopyridine as catalysts. Despite high conversions, the number average molecular weights (Mn's) did not exceed values around 20000. Even in the samples having the highest molecular weights, unreacted 4-chlorothiophenylester endgroups were detected by GPC measurements evaluated with a UV-detector. It is concluded that both factors, cyclization and incomplete conversion, contribute to the limitation of the chain growth. KW - Ring-Opening Polycondensations KW - Macrocycles KW - Polyesters PY - 2000 DO - https://doi.org/10.1081/MA-100101099 SN - 1060-1325 SN - 1520-5738 VL - 37 IS - 4 SP - 379 EP - 394 PB - Taylor & Francis CY - Philadelphia, PA AN - OPUS4-2167 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Falkenhagen, Jana A1 - Friedrich, Jörg Florian A1 - Schulz, Günter A1 - Krüger, Ralph-Peter A1 - Much, Helmut A1 - Weidner, Steffen T1 - Liquid Adsorption Chromatography near Critical Conditions of Adsorption coupled with Matrix-assisted Laser Desorption/Ionization Mass Spectrometry N2 - Chemical heterogeneities and molecular weight distributions of poly(ethylene oxide) (PEO)-co-polymethylene (PM) model oligomers, which are relevant to the synthesis of commonly used tensides, were investigated. For analytical characterization, the well-known principle of liquid adsorption chromatography at 'critical conditions' (LACCC) was modified. Near the critical conditions of adsorption of the PEO unit, e.g., at slight adsorption conditions of PM, the copolymers could be separated according to their PM chain length. The eluates were separated and single fractions of each peak were continuously transferred onto the MALDI target by means of a commercially available device. Simultaneously, the MALDI matrix solution was continuously added with a second pump. This procedure offers the possibility of the formation of homogeneous matrix-polymer textures. By MALDI-MS a complete characterization of the chemical composition (PEO and PM chain length) of each peak could be achieved. The obtained MALDI mass spectra of the eluates at different retention times could be used for the molecular weight calibration of the LAC system. In this way, an additional application of SEC, as in conventional 2D-chromatography, was avoided by using the MALDI method as quasi chromatographic separation KW - Liquid adsorption chromatography KW - Matrix-assisted laser desorption KW - Ionization mass spectrometry KW - Coupling methods KW - MALDI PY - 2000 DO - https://doi.org/10.1080/10236660008034644 SN - 1023-666X SN - 1563-5341 VL - 5 SP - 549 EP - 562 PB - Gordon and Breach Publ. CY - Amsterdam AN - OPUS4-2168 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kricheldorf, H. A1 - Probst, N. A1 - Schwarz, G. A1 - Schulz, Günter A1 - Krüger, Ralph-Peter T1 - New Polymer Syntheses - 107. Aliphatic Poly(thio ester)s by Ring-Opening Polycondensation of 2-Stanna-1,3-Dithiacycloalkanes N2 - We prepared 2,2-dibutyl-2-stanna-1,3-dithiacycloalkanes from dibutyltin oxide and ,-dimercaptoalkanes. Heterocycles with five-, six-, seven-, or nine-ring members were used as bifunctional monomers for polycondensations with aliphatic dicarboxylic acid chlorides. These polycondensations conducted in bulk were highly exothermic and yielded poly(thio ester)s with number average molecular weights (Mn's) in the range of 5000-30,000 Da. These poly(thio ester)s proved to be rapidly crystallizing materials with melting temperatures in the range of 90-150 °C. In addition to the success of the new synthetic approach, two interesting and unpredictable results were obtained. All volatile species detectable by matrix assisted laser desorption induced-time of flight (MALDI-TOF) mass spectrometry were cyclic oligo- and poly(thio ester)s. Second, several polyesters showed a reversible first-order change of the crystal modification as identified by differential scanning calorimetry measurements and X-ray scattering with variation of the temperature. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3656-3664, 2000 KW - Poly(thio-ester)s KW - Ring-opening polycondensation KW - Macrocycles KW - Change of crystal structure PY - 2000 DO - https://doi.org/10.1002/1099-0518(20001001)38:19<3656::AID-POLA190>3.0.CO;2-M SN - 0360-6376 SN - 0887-624X VL - 38 IS - 19 SP - 3656 EP - 3664 PB - Wiley CY - Hoboken, NJ AN - OPUS4-2170 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gähde, J. A1 - Mix, Renate A1 - Krüger, Ralph-Peter A1 - Goering, Harald A1 - Funke, W. A1 - Hermann, U. T1 - Adherence of Liquid Crystalline TDI-Polyurethanes to Steel KW - Main-chain liquid crystalline polyurethanes KW - Primer on steel KW - Pull-off test KW - Wet adhesion of alkyd melamine resin KW - Mesogenic unit KW - Glass transition temperature KW - Hard segments KW - Soft segments PY - 1996 SN - 0021-8464 SN - 1545-5823 VL - 58 SP - 243 EP - 251 PB - Gordon & Breach CY - New York, NY AN - OPUS4-2152 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Spickermann, J. A1 - Martin, K. A1 - Räder, H.J. A1 - Müllen, K. A1 - Schlaad, H. A1 - Müller, A. H. E. A1 - Krüger, Ralph-Peter T1 - Quantitative analysis of broad molecular weight distributions obtained by MALDI-TOF mass spectrometry PY - 1996 SN - 1469-0667 SN - 1356-1049 SN - 1365-0718 IS - 2 SP - 161 EP - 165 PB - IM Publications CY - Chichester AN - OPUS4-2153 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wachsen, O. A1 - Reichert, K.H. A1 - Krüger, Ralph-Peter A1 - Much, Helmut A1 - Schulz, Günter T1 - Thermal decomposition of biodegradable polyesters - III. Studies on the mechanisms of thermal degradation of oligo-L-lactide using SEC, LACCC and MALDI-TOF-MS PY - 1997 SN - 0141-3910 SN - 1873-2321 VL - 55 SP - 225 EP - 231 PB - Applied Science Publ. CY - London AN - OPUS4-2154 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tressl, R. A1 - Wondrak, G. T. A1 - Krüger, Ralph-Peter A1 - Rewicki, D. T1 - New Melanoidin-like Maillard Polymers from 2-Deoxypentoses KW - Maillard system 2-deoxy-D-ribose / methylamine KW - Oligomerization of N-methyl-2-hydroxymethyl(and hydroxyl[13C]methyl)pyrrole KW - Antioxidative activity KW - Model compounds for melanoidins PY - 1998 SN - 0021-8561 SN - 1520-5118 VL - 46 IS - 1 SP - 104 EP - 110 PB - American Chemical Society CY - Columbus, Ohio AN - OPUS4-2158 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tressl, R. A1 - Wondrak, G. T. A1 - Garbe, L.-A. A1 - Krüger, Ralph-Peter A1 - Rewicki, D. T1 - Pentoses and Hexoses as Sources of New Melanoidin-like Maillard-Polymers KW - Model compounds for melanoidins KW - Pyrroles from pentoses and hexoses KW - Beta-dicarbonyl pathway of the Maillard reaction KW - Polycondensation KW - MALDI-TOF-MS analysis KW - Antioxidative activity of oligomeric model compounds PY - 1998 SN - 0021-8561 SN - 1520-5118 VL - 46 IS - 5 SP - 1765 EP - 1776 PB - American Chemical Society CY - Columbus, Ohio AN - OPUS4-2159 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kricheldorf, H.R. A1 - Böhme, S. A1 - Krüger, Ralph-Peter T1 - Macrocycles, 16a - Macrocyclic Dibutyltin Dicarboxylates via Thermodynamically Controlled Polycondensations N2 - Various dibutyltin derivatives were polycondensed with aliphatic ,-dicarboxylic acids having chain lengths from 4 (succinic acid) to 22 carbon atoms. White crystalline products were obtained from all experiments, and the structure of the products was independent of the synthetic method. Viscosity measurements revealed low molecular weights (n 1 500 Da) in all cases. Vapor pressure osmometry (VPO) measurements and matrix-assisted laser desorption time-of-flight (MALDI-TOF) mass spectrometry proved that cyclic dimers and trimer were formed from dicarboxylic acids having 6 to 16 carbons, but mainly the monomeric cycle from docosane dioic acid. Heating to 250°C did not change the structure. Therefore, the results indicate that the macrocycles are the result of a thermodynamically controlled ring-closing polycondensation. This means that linear high-molecular weight poly(dibutyltin dicarboxylate)s cannot exist above room temperature. KW - Macrocyclics KW - MALDI KW - Oligomers KW - Polycondensation KW - Thermodynamics PY - 2002 SN - 1022-1352 SN - 1521-3935 VL - 203 IS - 2 SP - 313 EP - 318 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-2181 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Falkenhagen, Jana A1 - Jancke, Harald A1 - Krüger, Ralph-Peter A1 - Rikowski, Eckhard A1 - Schulz, Günter T1 - Characterization of Silsesquioxanes by Size-exclusion chromatography and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry N2 - Liquid chromatography in combination with spectroscopic methods like matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) or nuclear magnetic resonance (NMR) spectroscopy is a powerful method to characterize silsesquioxanes and silsesquioxane mixtures. As new examples, the formation of silsesquioxyl-substituted silsesquioxanes [(n-octyl)7(SiO1.5)8]2O and [(n-octyl)7(SiO1.5)8O]2[(n-octyl)6(SiO1.5)8] as well as the cage rearrangement of octa-[(n-heptyl)silsesquioxane] to larger structur es [(n-heptyl)SiO1.5)]n up to n=28 are shown. PY - 2003 DO - https://doi.org/10.1002/rcm.911 SN - 0951-4198 SN - 1097-0231 VL - 17 IS - 4 SP - 285 EP - 290 PB - Wiley CY - Chichester AN - OPUS4-2182 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krüger, Ralph-Peter A1 - Kricheldorf, H.R. A1 - Böhme, S. T1 - Macrocycles 16. Macrocyclic Dibutyltin Dicarboxylates by Ring-Closing Polycondensation N2 - Various dibutyltin derivatives were polycondensed with aliphatic ,-dicarboxylic acids having chain lengths from 4 (succinic acid) to 22 carbon atoms. White crystalline products were obtained from all experiments, and the structure of the products was independent of the synthetic method. Viscosity measurements revealed low molecular weights (n 1 500 Da) in all cases. Vapor pressure osmometry (VPO) measurements and matrix-assisted laser desorption time-of-flight (MALDI-TOF) mass spectrometry proved that cyclic dimers and trimer were formed from dicarboxylic acids having 6 to 16 carbons, but mainly the monomeric cycle from docosane dioic acid. Heating to 250°C did not change the structure. Therefore, the results indicate that the macrocycles are the result of a thermodynamically controlled ring-closing polycondensation. This means that linear high-molecular weight poly(dibutyltin dicarboxylate)s cannot exist above room temperature. PY - 2002 DO - https://doi.org/10.1002/1521-3935(20020101)203:2<313::AID-MACP313>3.0.CO;2-V SN - 1022-1352 SN - 1521-3935 VL - 203 IS - 2 SP - 313 EP - 318 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-1796 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krüger, Ralph-Peter A1 - Kricheldorf, H.R. A1 - Böhme, S. T1 - Macrocyclic Dibutyltin Dicarboxylates via Thermodynamically Controlled Polycondensations KW - Macrocyclics KW - MALDI KW - Oligomers KW - Polycondensation KW - Thermodynamics PY - 2002 SN - 1022-1352 SN - 1521-3935 IS - 203 SP - 313 EP - 318 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-1656 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Grimm, B. A1 - Krüger, Ralph-Peter A1 - Schrader, S. A1 - Prescher, D. T1 - Molecular structure investigations on fluorine containing polyazomethines by means of the MALDI-TOF-MS technique N2 - Three new aromatic polyazomethines have been synthesized by solution polycondensation reactions of terephthalic dialdehyde with fluorine containing aromatic diamines. The polymers were obtained in high yields. The investigation of these polymers by means of matrix-assisted laser desorption ionization–time-of-flight–mass spectrometry (MALDI–TOF–MS) proved the initial members of the four theoretical possible series of the corresponding oligomers with 2–10 repeating units per molecule. KW - Polyazomethines KW - Oligomers KW - MALDI-TOF-MS PY - 2002 DO - https://doi.org/10.1016/S0022-1139(01)00498-5 SN - 0022-1139 SN - 1873-3328 VL - 113 SP - 85 EP - 91 PB - Elsevier CY - Amsterdam AN - OPUS4-1657 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hoebbel, D. A1 - Weber, Ch. A1 - Schmidt, H. A1 - Krüger, Ralph-Peter T1 - Synthesis and Properties of Perfluoroalkyl Groups Containing Double Four-Ring Spherosilicate (Siloxysilsesquioxane) Precursors N2 - Organically modified cage-like double four-ring spherosilicates have received considerable interest in the construction of nanosized hybrid materials, as well as building units for structural well-defined polymers. This group is extended by perfluoroalkyl ligands containing spherosilicates, synthesized by addition reaction of the octahydridodimethylsiloxyoctasilsesquioxane [H(CH3)2Si]8Si8O20 and heptadecafluorodecyl methacrylate. The resultant liquid spherosilicate substituted with eight terminal perfluoroalkyl groups was characterized by 29Si and 13C NMR spectroscopies and MALDI Time-of-Flight mass spectrometry. Partial substitution of perfluoroalkyl ligands by trimethoxysilyl containing groups provides condensable precursors for the synthesis of hydrophobic and oleophobic materials via the sol-gel process. This new spherosilicate, carrying on average four perfluoroalkyl groups and four trimethoxysilyl groups shows better hydrophobic and oleophobic properties compared with commonly used perfluoroalkyltrialkoxysilanes under identical concentration of perfluoroalkyl chains. In addition a comprehensive literature survey is given on structural well characterized, organically modified cage-like double four-ring spherosilicates. KW - Spherosilicate KW - Siloxysilsesquioxane KW - Perfluoralkylalkoxysilane KW - 29Si NMR KW - Coatings KW - Hydrophobicity PY - 2002 DO - https://doi.org/10.1023/A:1015239707783 SN - 0928-0707 SN - 1573-4846 VL - 24 SP - 121 EP - 129 PB - Kluwer Academic Publ. CY - Dordrecht AN - OPUS4-1658 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kukula, H. A1 - Schlaad, H. A1 - Krüger, Ralph-Peter A1 - Falkenhagen, Jana T1 - Improved Synthesis and Characterization of w-Primary Amino-Functional Polystyrenes and Polydienes PY - 2002 DO - https://doi.org/10.1021/ma0204397 SN - 0024-9297 SN - 1520-5835 VL - 35 IS - 18 SP - 7157 EP - 7160 PB - American Chemical Society CY - Washington, DC AN - OPUS4-1659 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gloede, J. A1 - Pieper, U. A1 - Costisella, B. A1 - Krüger, Ralph-Peter T1 - Ein stabiles Trichlor-oxyphosphoran mit einem Oxaphosphorinring N2 - Das cyclische, arylsubstituierte Chlorphosphonit 3 reagiert mit Chlor zum Trichlor-oxyphosphoran 4 (6, 6, 6-Trichlor-6H-dibenzo[c, e]1, 2-oxaphosphorin). Die Stabilität des Phosphorans ist lösungsmittelabhängig. KW - Oxaphosphorines KW - Phosphoranes PY - 2003 DO - https://doi.org/10.1002/zaac.200200360 SN - 0044-2313 SN - 1521-3749 SN - 0372-7874 SN - 0863-1786 SN - 0863-1778 VL - 629 IS - 6 SP - 998 EP - 1000 PB - Wiley-VCH CY - Weinheim AN - OPUS4-2541 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlaad, H. A1 - Müller, A. H. E. A1 - Kolshorn, H. A1 - Krüger, Ralph-Peter T1 - Mechanism of anionic polymerization of (meth)acrylates in the presence of aluminium alkyls PY - 1995 SN - 0170-0839 SN - 1436-2449 VL - 35 SP - 169 EP - 176 PB - Springer CY - Berlin AN - OPUS4-2144 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krüger, Ralph-Peter A1 - Much, Helmut A1 - Schulz, Günter T1 - Determination of polymer heterogeneity by two-dimensional orthogonal liquid chromatography KW - Orthogonal chromatography KW - Size exclusion chromatography KW - Liquid adsorption chromatography at critical conditions KW - Matrix-assisted laser desorption ionization time-of-flight mass spectrometry KW - Polyester KW - Polyether PY - 1996 SN - 1023-666X SN - 1563-5341 VL - 2 SP - 221 EP - 235 PB - Gordon and Breach Publ. CY - Amsterdam AN - OPUS4-2146 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Sonnenschein, H. A1 - Kreher, T. A1 - Gründemann, E. A1 - Krüger, Ralph-Peter A1 - Kunath, A. A1 - Zabel, V. T1 - Novel Redox-Active Cyclophanes Based on 3,3'-Bisindolizines - Synthesis and Chirality PY - 1996 SN - 0022-3263 SN - 1520-6904 VL - 61 SP - 710 EP - 714 PB - American Chemical Society CY - Washington, DC AN - OPUS4-2147 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Leukel, J. A1 - Burchard, W. A1 - Krüger, Ralph-Peter A1 - Much, Helmut A1 - Schulz, Günter T1 - Mechanism of the anionic copolymerization of anhydride- cured epoxies-analysisted by matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry (MALDI-TOF-MS) PY - 1996 SN - 1022-1336 SN - 1521-3927 VL - 17 SP - 359 EP - 366 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-2148 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kricheldorf, H.R. A1 - Vakhtangishvili, L. A1 - Schwarz, G. A1 - Schulz, Günter A1 - Krüger, Ralph-Peter T1 - Macrocycles 25. Cyclic poly(ether sulfone)s derived from 4-tert-butylcatechol N2 - Poly(ether sulfone)s were prepared by polycondensation of silylated 4-tert-butylcatechol and 4,4?-difluorodiphenylsulfone in N-methylpyrrolidone. The feed ratio and the reaction time were varied to study the influence of stoichiometry and conversion on molecular weight and extent of cyclization. Molecular weights and molecular weight distributions (MWD)s were characterized by SEC measurements calibrated with polystyrene. Light scattering confirmed that calibration with polystyrene gives reasonable results and revealed a tendency towards a bimodal MWD for the samples rich in cycles. The MALDI-TOF mass spectrometry indicated that the extent of cyclization increased with higher conversion and with optimization of the stoichiometry. This interpretation was confirmed by 1H NMR endgroup analyses. For the samples with the highest molar masses only mass peaks of cycles were found, which were detectable up to 20 000 Da before and up to 27 000 Da after fractionation. Via the pseudo-high dilution method low molar mass poly(ether sulfone) containing more than 95 mol% of cycles were prepared, and even these low molar mass samples had broad MWDs. DSC measurements indicated that the glass transition temperatures depend on the structure of the endgroups and increase with higher fractions of cycles. KW - Poly(ether sulfone)s KW - Polycondensation KW - MALDI-TOF mass spectrometry PY - 2003 DO - https://doi.org/10.1016/S0032-3861(03)00410-5 SN - 0032-3861 SN - 1873-2291 VL - 44 SP - 4471 EP - 4480 PB - Springer CY - Berlin AN - OPUS4-2623 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kricheldorf, H.R. A1 - Vakhtangishvili, L. A1 - Schwarz, G. A1 - Krüger, Ralph-Peter T1 - Cyclic Hyperbranched Poly(ether ketone)s Derived from 3,5-Bis(4-fluorobenzoyl)phenol N2 - 3,5-Bis(4-fluorobenzoyl)phenol was polycondensed under various reaction conditions. Low molecular weights were obtained (Mn < 8000 Da), and MALDI-TOF mass spectrometry indicated that the chain growth was limited by cyclization. In the best mass spectra the cyclic, hyperbranched poly(ether ketone)s were detectable up to masses around 14 000 Da. When 4,4'-difluordiphenyl sulfone was added, star-shaped polymers having a diphenyl sulfone star center were formed, but cyclization was not completely suppressed. The results were compared to those obtained from "linear polycondensations" based on 4,4'-difluorobenzophenone (DFBP) and 4-tert-butylcatechol or bisphenol A. The poly(ether ketone)s of DFBP had also low molecular weights and contained high fractions of cycles. It is concluded that also in the case of hyperbranched polymers cyclization competes with propagation at any stage of the polycondensation at any concentration. Therefore, the fundamental trend of any "abn" polycondensation is the formation of star-shaped polymers having a cyclic core and hyperbranched star arms. PY - 2003 DO - https://doi.org/10.1021/ma021799x SN - 0024-9297 SN - 1520-5835 VL - 36 SP - 5551 EP - 5558 PB - American Chemical Society CY - Washington, DC AN - OPUS4-2622 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Viala, S. A1 - Tauer, K. A1 - Antonietti, M. A1 - Krüger, Ralph-Peter A1 - Bremser, W. T1 - Structural control in radical polymerization with 1,1-diphenylethylene. 1. Copolymerization of 1,1-diphenylethylene with methyl methacrylate N2 - The role of 1,1-diphenylethylene (DPE) in radical emulsion polymerization of methyl methacrylate is investigated. The presence of DPE causes a strong decrease in both the rate of polymerization and the molecular weight. According to the results of structure analysis by means of MALDI-TOF mass spectrometry, UV–vis spectroscopy, and 1H–NMR spectroscopy, DPE is incorporated in the copolymer chain exclusively as a reactive recombinant ?,p-dimer, underlining the peculiar role of DPE in radical polymerizations. KW - Emulsion polymerization KW - 1,1-Diphenylethylene KW - Copolymer structure PY - 2002 DO - https://doi.org/10.1016/S0032-3861(02)00676-6 SN - 0032-3861 SN - 1873-2291 VL - 43 IS - 26 SP - 7231 EP - 7241 PB - Springer CY - Berlin AN - OPUS4-1919 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Klapdohr, S. A1 - Moszner, N. A1 - Kickelbick, G. A1 - Krüger, Ralph-Peter T1 - Investigation of the Structure of Polymerizable Silsesquioxanes by GPC and MALDI-TOF-MS in Relation to their Viscosity N2 - Hydrolytic condensation of different methacrylate groups containing alkoxy silanes yielded resins which showed interesting properties as a matrix for dental composites. For this purpose, resins of low viscosity are desired resulting in composites with a high amount of inorganic fillers. Our investigations demonstrated that the viscosity of the obtained polycondensates was predominantly influenced by the kind of organic spacer between the methacrylate group and the silicon atom. In addition, the viscosity also significantly changed in dependence of the kind of structure units built. NMR spectroscopic investigations as well as size exclusion chromatography (SEC) and matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry showed that the formed structures depended both on the kind of catalyst used for hydrolysis/condensation and the bulkiness of the organic substituent at the silicon atom. KW - Nanostructure KW - Sols KW - Polycondensation KW - Silicon compounds KW - Dental PY - 2006 DO - https://doi.org/10.1007/s00706-006-0442-z SN - 0026-9247 SN - 1434-4475 VL - 137 SP - 667 EP - 679 PB - Springer CY - Wien AN - OPUS4-12139 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kricheldorf, H. A1 - Chatti, S. A1 - Schwarz, G. A1 - Krüger, Ralph-Peter T1 - Macrocycles 27 - Cyclic Aliphatic Polyesters of Isosorbide N2 - Numerous polycondensations of isosorbide and suberoyl chloride or other aliphatic dicarboxylic acid dichlorides were performed with pyridine as a catalyst and HCl acceptor. The reaction conditions were varied to optimize both the molecular weight and the fraction of cyclic oligo- and polyesters. Furthermore, we attempted to obtain the cyclic monomer by catalyzed back-biting degradation of the molten cyclic polyesters above 220 °C in vacuo. The polyesters were characterized by viscosity and size exclusion chromatographic measurements as well as matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. In selected cases, mixtures of linear and cyclic polyesters were treated with a hot solution of partially methylated ß-cyclodextrin in methanol. This treatment allowed for a selective extraction of the linear chains up to approximately 5000 Da. KW - Polycondensation KW - Cyclization KW - Isosorbide KW - Polyesters KW - MALDI PY - 2003 DO - https://doi.org/10.1002/pola.10933 SN - 0360-6376 SN - 0887-624X VL - 41 IS - 21 SP - 3414 EP - 3424 PB - Wiley CY - Hoboken, NJ AN - OPUS4-12017 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weidner, Steffen A1 - Falkenhagen, Jana A1 - Krüger, Ralph-Peter A1 - Just, Ulrich T1 - Principle of Two-Dimensional Characterization of Copolymers N2 - Two-dimensional polymer characterization is used for a simultaneous analysis of molar masses and chemical heterogeneities (e.g., end groups, copolymer composition, etc.). This principle is based on coupling of two different chromatographic modes. Liquid adsorption chromatography at critical conditions (LACCC) is applied for a separation according to the chemical heterogeneity, whereas in the second-dimension fractions are analyzed with regard to their molar mass distribution by means of size exclusion chromatography (SEC). Because appropriate standards for a calibration of the SEC are seldom available, matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry (MALDI-TOF MS) was used to substitute the SEC. The LACCC-MALDI MS coupling enables acquiring additional structural information on copolymer composition, which can considerably enhance the performance of this coupled method. KW - MALDI-TOF MS KW - Chromatographie KW - Kopplung PY - 2007 DO - https://doi.org/10.1021/ac062145f SN - 0003-2700 SN - 1520-6882 VL - 79 IS - 13 SP - 4814 EP - 4819 PB - American Chemical Society CY - Washington, DC AN - OPUS4-17722 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -