TY - JOUR A1 - Bremser, Wolfram A1 - Maiwald, Michael A1 - Kipphardt, Heinrich T1 - Anwendung von Normen in der Gasanalytik - Teil 4 - Messunsicherheit und Rückführbarkeit von Messergebnissen N2 - Zusammen mit der Genauigkeit von Messungen ist die ihnen zugeordnete Messunsicherheit Ausdruck und Maß von Vergleichbarkeit und Richtigkeit. Die Messunsicherheit spielt ebenso die Schlüsselrolle im Aufbau einer Rückführbarkeitskette, wie in diesem Beitrag beschrieben. Es ist der vierte und letzte Teil einer Artikelserie (siehe Infokasten), die Einblicke gibt in die Arbeit des DIN-Normenausschusses „Gasanalyse und Gasbeschaffenheit“ (DIN NA 062-05-73 AA) sowie der international tätigen Technical Committees 158 und 193 der ISO. KW - Normen KW - Messunsicherheit KW - Rückführbarkeit PY - 2015 SN - 1436-2597 SN - 1439-0663 IS - 12 SP - 29 EP - 31 PB - GIT-Verl., Wiley-VCH CY - Weinheim AN - OPUS4-35258 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael A1 - Kipphardt, Heinrich A1 - Bremser, Wolfram T1 - Vom Abgas zum Erdgas - Wie genau sind Sondergase? - Normungsarbeit rund um aktuelle High-Tech Verfahren und Prozesse - Teil 1 N2 - In vielen industriellen High-Tech Verfahren und Prozessen, Forschung und Wissenschaft, Medizin und Umwelttechnik werden Sondergase eingesetzt. Als Gattungsbegriff umfasst diese Bezeichnung ein ansehnliches Spektrum höchster Qualitäten an Gasen. Dazu gehören u. a. Reinstgase mit besonders hohen Anforderungen an ihre Reinheit, Gasgemische genau definierter Zusammensetzung und Isotopengemische. Wie genau kann man Gaszusammensetzungen heute messen? Wie schafft man es, dass alle dasselbe messen? Welche Techniken kommen dabei zum Einsatz? KW - Normung KW - DIN KW - Gas-Normale KW - Referenzmaterialien KW - Erdgas KW - Abgas PY - 2015 SN - 1436-2597 SN - 1439-0663 VL - 5 SP - 6 EP - 8 PB - GIT-Verl., Wiley-VCH CY - Weinheim AN - OPUS4-34945 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kipphardt, Heinrich T1 - Experimental determination of (p, p, T) data for binary mixures of methane and helium T2 - 19 th Symposium on Thermophysical Properties CY - Boulder; CO, USA DA - 2015-06-21 PY - 2015 AN - OPUS4-35055 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kipphardt, Heinrich A1 - Matschat, Ralf T1 - Traceability and uncertainty of chemical measurement results exemplified in the frame of the certification and the use of the glass CRM BAM-S005 PY - 2007 SN - 0391-4259 VL - 6 SP - 19 EP - 23 PB - Aurora Pubbl. CY - Venezia AN - OPUS4-17439 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kipphardt, Heinrich T1 - CCQM-P107: purity of zinc with respect to six defined metallic analytes T2 - Meeting of CCQM-Inorganic Analytical Working Group CY - Vienna, Austria DA - 2008-10-08 PY - 2008 AN - OPUS4-18398 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kipphardt, Heinrich T1 - CCQM-P107 - purity of zinc with respect to six metallic analytes T2 - CCQM-IAWG-Meeting CY - Paris, France DA - 2009-04-20 PY - 2009 AN - OPUS4-19320 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kipphardt, Heinrich T1 - The Importance of UHPM conferences and of ultrahigh metals in view of analytical challenges T2 - UHPM 2009 CY - Sendai, Japan DA - 2009-12-15 PY - 2009 AN - OPUS4-20662 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kipphardt, Heinrich T1 - Material Technology and Corrosion Science at BAM T2 - UHPM Symposium 2009 CY - Kawasaki, Japan DA - 2009-12-18 PY - 2009 AN - OPUS4-20837 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Recknagel, Sebastian A1 - Kipphardt, Heinrich A1 - Lange, Britta A1 - Hoppe, Marion T1 - Traceable analysis of impurities in metallic reference materials using GD-MS N2 - The traceabiiity requirements for certification analyses of reference materials are much more stringent than for routine analysis, where certified matrix reference materials (CRM) can be used for calibration and to establish traceabiiity. Although the ISO-Guides related to CRM production and certification are not fully clear concerning calibration, many established CRM-producers do not accept matrix-CRMs for calibration in case of certification analyses, e.g. to avoid circular reasoning. These requirements limit the methods used for certification to those that can be calibrated using Standards of known high purity and stoichiometry or mixtures of such Standards. Powerful solid sampling techniques such as glow discharge mass spectrometry (GD-MS) or spark-optical emission spectrometry (SOES), where usually compact CRMs are used for calibration, seem not be applicable for certification analyses. Especially GD-MS is a powerful tool for trace element determination of solid samples. Beside metallic impurities the use of specific gas mixtures enables also the determination of interesting nonmetallic impurities such as sulfur and phosphorus. Within BAM a calibration approach, was developed which enables to use mixtures of Standards of known high purity and stoichiometry also for GD-MS. Analogue to matrix adaption in solution based techniques, the calibration approach is based on doped pressed powder pellets. Approach and application on the certification analyses of copper and Steel CRMs are presented. T2 - CETAS 2011 - 8th International workshop on progress in analytical chemistry & materials characterisation in the steel and metal industries CY - Luxembourg, Luxembourg DA - 17.05.2011 PY - 2011 IS - OC53 SP - 361 EP - 365 AN - OPUS4-23762 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kipphardt, Heinrich T1 - Reinststoffe für die Kalibrierung - Wie rein sind die Stoffe? T2 - Analytica Conference 2004 CY - Munich, Germany DA - 2004-05-11 PY - 2004 AN - OPUS4-5970 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -