TY - CONF A1 - Kiefer, P. A1 - Balzer, R. A1 - Behrens, H. A1 - Reinsch, Stefan A1 - Müller, Ralf A1 - Deubener, J. T1 - In-situ observation of sub-critical crack growth in water bearing borate glasses N2 - 185 cracks were initiated in a soda-lime-silica glass by Vickers indentation and grown under controlled dry nitrogen atmosphere. Direct observation of subcritical crack growth (SCCG) upon indentation was performed using a video camera with an image acquisition rate of 3 ms. The results show that the validity of K(c) relations used to determine the indentation fracture toughness from a single imprint is questionable. It seems that correlation of crack length to stress intensity necessitate the use of statistical significant data of multiple crack events. T2 - FFAG 7: 7th International Workshop on Flow and Fracture of Advanced Glasses CY - Aalborg, Denmark DA - 02.07.2017 KW - Sub critical crack growth KW - Glass KW - Vickers KW - Water bearing glass KW - Indentation fracture toughness PY - 2017 AN - OPUS4-44211 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kiefer, P. A1 - Balzer, R. A1 - Behrens, H. A1 - Waurischk, Tina A1 - Reinsch, Stefan A1 - Müller, Ralf A1 - Deubener, J. T1 - In-situ Beobachtung und statistische Analyse des unterkritischen Risswachstums in Gläsern N2 - Um das Risswachstum in Gläsern zu untersuchen, sind in einer Glovebox 185 Risse ausgehen von Vickers-Eindrücken in Kalk-Natron-Glas initiiert und gewachsen. Die direkte Beobachtung des unterkritischen Risswachstums erfolgte mit einer Hochgeschwindigkeitskamera. Die Ergebnisse zeigen, dass die statistische Auswertung vieler radialer Risse von multiplen Rissevents notwendig ist, um eine Korrelation zum Spannungsintensitätsfaktor ziehen zu können. T2 - Fachausschuss I der Deutschen Glastechnischen Gesellschaft (DGG) CY - Erlangen, Germany DA - 26.09.2017 KW - Risswachstum KW - Glas KW - Vickers KW - In-situ PY - 2017 AN - OPUS4-44215 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kiefer, P. A1 - Balzer, R. A1 - Dietrich, U. A1 - Behrens, H. A1 - Waurischk, Tina A1 - Reinsch, Stefan A1 - Müller, Ralf A1 - Deubener, J. T1 - Viscosity of water bearing glasses in the glass transition range – Phosphates vs. silicates and borates N2 - Water has a strong impact on the viscosity and the transition temperature of oxide glasses. It acts as a fluxing agent, reducing viscosity particularly in the glass transition range, and by that flattening the viscosity-temperature curve and decreasing the fragility of hydrous glass melts. This general behavior is found for silicate and borate as well as in borosilicate compositions. However, there is still a lack of data with respect to hydrous phosphate glasses. Here, we study the influence of structural water on the viscosity of Li2O-MgO-(Al2O3-)P2O5 glasses. The glasses were synthesized in an internally heated pressure vessel (IHPV) at a pressure of 0.5 GPa. The selected pressure allows for the synthesis of glass specimens with water contents of several wt.%. The viscosity measurements were carried out in the glass transition range, i.e. log η ≈ 10-13 (η in Pa s), using a sphere penetration viscometer. The measured data agree with glass transition temperatures measured by differential thermo analysis. First results further suggest that the fragility of the analyzed phosphates decreases with increasing water content. T2 - 91. Glastechnische Tagung CY - Weimar, Germany DA - 28.05.2017 KW - Water-bearing glasses KW - Viscosity PY - 2017 AN - OPUS4-40812 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -