TY - CONF A1 - Kühne, Hans-Carsten T1 - Die Sachkundige Planung von Schutz- und Instandsetzungsmaßnahmen unter besonderer Berücksichtigung der Spezifikation von Leistungsmerkmalen T2 - 10. GUEP Planertag CY - Köln DA - 2015-12-01 PY - 2015 AN - OPUS4-35180 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Untergrundprüfung: Rautiefe, Oberflächenfeuchte und Haftzugfestigkeit, Durchführung und Auswertung T2 - Arbeitstagung 2015: "Schutz und Instandsetzung von Betonbauteilen - Aktuelle Regelwerke, Hinweise zum Stand der Technik und Praxisteil" CY - Berlin DA - 2015-11-10 PY - 2015 AN - OPUS4-35182 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Hüsken, Götz A1 - Mundra, Shishir A1 - Sander, C. A1 - Obermann, S. T1 - Die Betondickglasfenster des Glockenturms am Eiermannbau der Kaiser-Wilhelm-Gedächtniskirche N2 - Die Kaiser-Wilhelm-Gedächtniskirche (KWG) gilt als eine der wichtigsten Sehenswürdigkeiten Berlins in der City West und als ein herausragendes Beispiel für die „Dalle de Verre“ Verglasungen in sakralen Gebäuden. Der vorliegende Beitrag widmet sich der Fassade und den Glasfenstern des neuen Glockenturms, wobei die beschriebenen Szenarien aufgrund der annähernd gleichen Bauweise der restlichen neuen Baukörper in weiten Teilen starke Analogien aufweisen und insofern übertragbar sind. T2 - Workshop Kulturguterhaltung - Vom Dampfkessel zu Nanomaterialien CY - Berlin, Germany DA - 17.11.2021 KW - Kaiser-Wilhelm-Gedächtniskirche KW - Betondickglasfenster KW - Instandsetzung KW - Elektrochemische Realkalisierung PY - 2021 VL - 3 SP - 125 EP - 140 PB - Druckerei G. Bohm CY - Berlin AN - OPUS4-57092 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Vogler, Nico A1 - Drabetzki, Philipp A1 - Lindemann, Mathias A1 - Kühne, Hans-Carsten T1 - Description of the concrete carbonation process with adjusted depth resolved thermogravimetric analysis N2 - The thermal gravimetric analysis (TG) is a common method for the examination of the carbonation progress of cement-based materials. Unfortunately, the thermal properties of some components complicate the evaluation of TG results. Various hydrate phases, like ettringite (AFt), C-S-H and AFm decompose almost simultaneously in the temperature range up to 200 °C. Additionally, physical bound water is released in the same temperature range. In the temperature range between 450 °C and 600 °C the decomposition of calcium hydroxide and amorphous or weakly bound carbonates takes place simultaneously. Carbonates, like calcite, from limestone powder or other additives may be already contained in the noncarbonated sample material. For this research an attempt was made to minimise the influence of these effects. Therefore, differential curves from DTG-results of non-carbonated areas and areas with various states of carbonation of the same sample material were calculated and evaluated. Concretes based on three different types of cement were produced and stored under accelerated carbonation conditions (1 % CO2 in air). The required sample material was obtained by cutting slices from various depth of previously CO2-treated specimen and subsequent grinding. During the sample preparation, a special attention was paid that no additional carbonation processes took place. As reference method for the determination of the carbonation depth the sprayed application of phenolphthalein solution was carried out. Microscopic analysis where examined to confirm the assumptions made previously. Furthermore, the observed effect of encapsulation of calcium hydroxide by carbonates caused by the accelerated carbonation conditions was examined more closely. KW - Microscopy KW - Accelerated carbonation KW - Carbonation behaviour KW - Concrete KW - Thermal Analysis PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-530571 DO - https://doi.org/10.1007/s10973-021-10966-1 VL - 147 IS - 11 SP - 1 EP - 14 PB - Springer AN - OPUS4-53057 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Grunewald, Thomas A1 - Grätz, Rainer A1 - Kühne, Hans-Carsten T1 - Werkzeuge zur Verwendung in explosionsgefährdeten Bereichen - Erkenntnisse zur Zündwahrscheinlichkeit von Edelstahl und NE-Metallen gegen Baustahl und Estrichbeton in Wasserstoff und Acetylen N2 - Üblicherweise werden Werkzeuge für den industriellen Einsatz aus hochlegierten Chromstählen hergestellt. Für den Einsatz in explosionsgefährdeten Bereichen werden oft Werkzeuge aus speziellen Nichteisen-Metalllegierungen (NE-Metall) verwendet. Für diese sogenannten funkenarmen Werkstoffe und deren mögliche Schlagpartner gibt es bisher keine umfassenden Untersuchungen mit Aussagen zur Zündwahrscheinlichkeit. Die TRGS 723, Abschn. 5.15, fordert den Nachweis der Funkenfreiheit der verwendeten Werkstoffpaarung. Jedoch sind Werkzeuge keine Geräte oder Schutzsysteme im Sinne der Richtlinie 2014/34/EU. Deshalb ist es nicht möglich, Werkzeuge in Übereinstimmung mit dieser Richtlinie zu zertifizieren. Der Nachweis der Erfüllung dieser Anforderungen ist durch Zertifizierungen im sogenannten "gesetzlich nicht geregelten" Bereich möglich. Die BAM bietet diese Zertifizierung für "Funkenarme Werkzeuge" im Rahmen ihres Zertifizierungsprogrammes an. Die bisherigen Ergebnisse der hier vorgestellten Untersuchung haben gezeigt, dass es keine funkenfreien, metallischen Werkzeuge (non-sparking Tools) gibt. Entscheidend ist im Hinblick auf die TRGS 723, ob zündfähige Funken entstehen oder nicht. Es ist immer die Frage, worauf die Werkzeuge im praktischen Anwendungsfall schlagen oder fallen gelassen werden können, d.h. aus welchem Material der mögliche Schlagpartner besteht. Dies können metallische Schlagpartner, aber auch Betonoberflächen sein. Unterschiedliche Kombinationen von Werkstoffen ergeben bei Schlagbeanspruchung im explosionsgefährdeten Bereich jeweils unterschiedliche Zündwahrscheinlichkeiten. Aber auch die Höhe der beim Einsatz der Werkzeuge möglichen kinetischen Schlagenergie und der Brenngas/Luft-Atmosphäre im betreffenden explosionsgefährdeten Bereich sind wichtige Einflussgrößen. KW - Mechanisch erzeugte Funken KW - Nichtelektrische Funken KW - Schlagfunken KW - Schleiffunken KW - Reibfunken KW - Funkenarmes Werkzeug KW - Funkenfreies Werkzeug KW - Nichtelektrischer Explosionsschutz KW - Non sparking tools PY - 2021 DO - https://doi.org/10.37544/2191-0073-2021-11-12-33 SN - 2191-0073 VL - 11 IS - 11-12 SP - 33 EP - 37 PB - VDI Fachmedien CY - Düsseldorf AN - OPUS4-53936 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rogge, Andreas A1 - Meng, Birgit A1 - Kühne, Hans-Carsten T1 - 63. DAfStb-Forschungskolloquium in der BAM - Green Intelligent Building N2 - Das jährlich im Herbst an wechselnden Forschungsstandorten stattfindende DAfStb-Forschungskolloquium wurde im Jahr 2024 von der BAM Bundesanstalt für Materialforschung und -prüfung in Berlin ausgerichtet. Unter der Überschrift „Green Intelligent Building“ referierten rd. 35 Vortragende in fünf Sitzungen unterschiedlicher Thematik über verschiedene betonbezogene Forschungsschwerpunkte in der BAM. Anhand der überwiegend von Doktoranden und Post-Docs dargebotenen Vorträge konnten sich die Teilnehmerinnen und Teilnehmer ein aktuelles Bild von der Qualität der wissenschaftlichen Arbeit und der hervorragenden Forschungsmöglichkeiten in der BAM machen. Durch die Vernetzung unterschiedlich ausgerichteter Fachbereiche innerhalb der BAM werden Synergie-Effekte genutzt. Analytische, baustoffliche, konstruktive, umweltorientierte und auf die Verfahrensentwicklung ausgerichtete Bereiche der BAM forschen gemeinsam zum Thema Stahlbetonbau. Es folgen ausführliche Zusammenfassungen der Tagungsinhalte. T2 - 11. Jahrestagung des DAfStb mit 63. Forschungskolloquium der BAM Green Intelligent Building CY - Berlin, Germany DA - 16.10.2024 KW - Bauteile KW - Bauwerke KW - Beton KW - Chemie der Bindemittel KW - Digitalisierung im Bauwesen KW - Green Intelligent Building KW - Innovative Technologien KW - Klimafreundliche Bindemittel KW - Ressourcenschonung PY - 2025 SN - 0005-9846 VL - 75 IS - 4 SP - 128 EP - 129 PB - concrete content UG CY - Schermbeck AN - OPUS4-63109 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogler, Nico A1 - Barthel, Maria A1 - Leinitz, Sarah A1 - Kühne, Hans-Carsten ED - Ludwig, H.-M. T1 - Nachweis der Funktionalität von modifizierten Betonpflastersteinen N2 - In urbanen Zentren schreitet die Versiegelung von Oberflächen voran. Ursache ist die stetige Zunahme moderner Infrastruktur. Straßen und Plätze heizen sich stärker auf und begünstigen die Entstehung von Hitzeinseln (Urban Heat Island Effect). Dies wirkt sich zunehmend negativ auf die Lebensqualität innerhalb dieser Städte aus. Einen möglichen Lösungsansatz zur Abschwächung dieses Effekts bietet die Entwicklung von Betonpflastersteinen mit erweiterten Leistungsmerkmalen. Der Einsatz von wasserspeichernden Materialien kann zur Verringerung der Oberflächentemperatur durch Ausnutzung von Verdunstungskälte einen Beitrag leisten. Die speziellen Anforderungen an die Pflastersteine bedürfen genauerer Untersuchungen, wobei diese über den Umfang der Standardprüfungen hinausgehen und eine entsprechende Anpassung der Messtechnik zum Nachweis der Wirksamkeit erforderlich machen. Da die selbstkühlenden Pflastersteine nach dem Prinzip der Verdunstung arbeiten, ist sowohl die Fähigkeit der Speicherung als auch die Fähigkeit zur kontinuierlichen Abgabe von Wasser nachzuweisen. Der kühlende Effekt in Bezug auf Oberfläche und Umgebung steht dabei im Vordergrund. Des Weiteren sind Untersuchungen unter verschiedenen klimatischen Bedingungen sowohl unter Laborbedingungen als auch im Freifeldversuch durchzuführen. Die Prüfung der Druckfestigkeit und der kapillaren Wasseraufnahme und des sind ebenfalls Bestandteil der umfangreichen Untersuchungen. Durch den Einsatz von thermischer Messtechnik sowie mechanischer Prüfungen und Untersuchungen zur Dauerhaftigkeit ist es möglich eine Charakterisierung der Pflastersteine vorzunehmen und deren prinzipielle Funktionalität nachzuweisen. In diesem Beitrag werden die verschiedenen Möglichkeiten und die daraus resultierenden Ergebnisse vorgestellt und so Schlüsse zur Funktion und Anwendbarkeit von derartig modifizierten Betonpflastersteinen gezogen. T2 - 19. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 16.09.2015 KW - Modifizierte Betonpflastersteine KW - Dauerhaftigkeit KW - Temperaturverhalten PY - 2015 SN - 978-3-00-050225-5 VL - 24-01 SP - 1-1331 EP - 1-1338 AN - OPUS4-34871 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - EN 1504-1 - 10 Products and systems for the protection and repair of concrete structures T2 - MICROCON- Kolloquium CY - Berlin, Germany DA - 2006-11-29 PY - 2006 AN - OPUS4-14525 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vogler, Nico A1 - Barthel, Maria A1 - Kühne, Hans-Carsten T1 - Self-cooling concrete pavers – performance tests by long-term studies under various climatic conditions N2 - In the last several decades, the rural exodus has led to an increasing number of inhabitants in the urban areas. The increased building and infrastructural construction caused the transformation of the landscape and to an increased land sealing in these areas. Consequently, the increased land sealing influences the air temperatures in the cities, since houses, streets and squares heat up continuously. As a result, the city and metropolitan areas became significantly warmer than their surroundings - the effect is known as Urban Heat Island (UHI). These changes have a negative impact for the quality of life. To deal with the negative effects of UHI, a high level of technical and financial effort is necessary. The costs caused by the UHI effects are in the range of several billion US dollars worldwide per year. The recent studies on UHI showed that the established methods like parks and green spaces or bright coatings for roof areas will soon not be able to effectively cope with the UHI effect in urban areas. Therefore there is a need for additional methods to mitigate UHI effect in the cities. The streets, sidewalks and squares represent approximately 30% to 40% of the inner cities areas. If these areas are designed functionally, they can have a significant impact on the UHI. This contribution focuses on development of a concrete paving stone with self-cooling properties. For the cooling effect the evaporative cooling is used. The paving stone is able to store large quantities of water and deliver during appropriate environmental conditions. This paper deals with the results of the long-term experiments on the test-fields under different climatic conditions. To interpret the test-field-results, laboratory tests were carried out as well. The paper presents and discuss the obtained results, and points out the difficulties occurred. T2 - 2nd International conference on advances in cement and concrete technology in Africa CY - Dar es Salaam, Tanzania DA - 27.01.2016 KW - Urban heat island KW - Concrete paving stone KW - Self-cooling KW - Performance tests KW - Long-term studies KW - Hitzeinsel KW - Betonpflasterstein KW - Selbstkühlend KW - Nachweis der Wirksamkeit KW - Langzeitversuch PY - 2016 SP - 595 EP - 602 AN - OPUS4-35679 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Barthel, Maria A1 - Rübner, Katrin A1 - Kühne, Hans-Carsten A1 - Rogge, Andreas A1 - Dehn, F. T1 - From waste materials to products for use in the cement industry N2 - Industrial wastes (bottom ash, crushed concrete fines, filter residue, paper ash and lignite fly ash) have potential for use in building materials, for instance as raw materials for clinker production, as supplementary cementitious materials (SCMs) or mineral additions in concrete. The properties of the products are dependent on the reactivity of the waste materials used, which can be classified as inert, latent hydraulic or pozzolanic. In this study, waste materials were first characterised. This was followed by theoretical considerations of the mentioned application options. Experiments were limited to evaluation of potential as SCMs and, for this purpose, activity index measurements and calorimetric and thermogravimetric analyses were performed. Finally, the synergetic effects of various waste materials were considered. Paper ash (calcium oxide source) and filter residue (amorphous silicon dioxide source) showed the best prospects for use as cementitious material components. KW - thermal methods KW - blended cements KW - recycled material KW - analysis PY - 2016 DO - https://doi.org/10.1680/jadcr.15.00149 SN - 0951-7197 SP - 1 EP - 11 PB - ICE publishing CY - London, UK AN - OPUS4-36277 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Ünal, Murat ED - Raupach, M. T1 - Modulare Ersatzmassen zur Reprofilierung denkmalgeschützter Natursteinbauwerke N2 - Weltweit besteht einen hoher, stetig wachsender Bedarf an Natursteininstandsetzung im Bereich des denkmalgeschützten Kulturguts. Das Ausbessem beschädigter Elemente mit sogenannten Steinersatzmassen ist dabei eine etablierte Technik. Hierfür werden Mörtel unterschiedlichster Zusammensetzung verwendet. Die Schwierigkeit für den Restaurator liegt in der Wahl, bzw. der Verfügbarkeit des optimalen Produkts, um im individuellen Fall sowohl den mechanischen und bauphysikalischen Anforderungen als auch den gestalterischen und denkmalpflegerischen Belangen gerecht zu werden. Anhand der im Beitrag an Fallbeispielen erläuterten häufig auftretenden Probleme und der daraus abgeleiteten Anforderungen an Natursteininstandsetzung, lässt sich die Komplexität dieser Aufgabe erkennen. An der BAM wird derzeit im Rahmen eines Forschungsprojekts ein modulares Steinersatzsystem entwickelt. Ziel der Entwicklung ist es dem Restaurator die größtmögliche Freiheit in der Anpassung des Mörtels an die Originalsubstanz zu geben. Erste Ergebnisse aus Parameterstudien zur Bindemittel- und Sandvariation sowie zu Polymermodifikationen werden vorgestellt. T2 - 3. Kolloquium Erhaltung von Bauwerken CY - Ostfildern, Germany DA - 22.01.2013 PY - 2013 SN - 978-3-943563-03-0 SP - 333 EP - 349 CY - Ostfildern AN - OPUS4-28000 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Die Kandelaber des Ensembles am Charlottenburger Tor N2 - Auf der Charlottenburger Brücke entstand mit dem Charlottenburger Tor und den beiden Kandelabern von 1905 bis 1908 ein repräsentatives Ensemble von Einzelbauwerken. Für die architektonische Wirkung des Charlottenburger Tores waren die beiden ca. 22 Meter hohen Kandelaber auf der Charlottenburg zugewandten Seite des Tores bedeutsam. Die Stiftung Denkmal ließ die Kandelaber seit Mai 2007 mit dem Ziel rekonstruieren, dem Tor, seiner Umgebung und der Straße des 17 Juni den historischen Gesamteindruck wiederzugeben. Im Rahmen der Rekonstruktion wurde die Grundsatzentscheidung getroffen, dass die Wiederherstellung der komplett zerstörten und auch nicht mehr in Fragmenten vorhandenen Kandelaber nicht unter Anwendung der Bautechnik von 1900 durchgeführt werden sollte. Die Zielsetzung war viel mehr, mit moderner Bautechnik die Anmutung der Kandelaber von 1903 wiederherzustellen, die in Verbindung mit anderen baulichen Elementen, wie der Charlottenburger Brücke und des Charlottenburger Tores, den historischen Gesamtkomplex bilden. T2 - Workshop Kulturguterhaltung - Vom Dampfkessel zu Nanomaterialien CY - Berlin, Germany DA - 17.11.2021 KW - Charlottenburger Tor KW - Kunststein KW - Hydrophobierung KW - Bildhauerbeton PY - 2021 VL - 3 SP - 97 EP - 105 PB - Druckerei G. Bohm CY - Berlin AN - OPUS4-57091 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Vogler, Nico A1 - Lindemann, Mathias A1 - Drabetzki, Philipp A1 - Kühne, Hans-Carsten T1 - Alternative pH-indicators for determination of carbonation depth on cement-based concretes N2 - The most common method for determination of the carbonation depth is the sprayed application of indicator solutions, Phenolphthalein in particular. Since the aerosols of Phenolphthalein are suspected to be carcinogenic, efforts have been intensified to use alternative indicators for the determination of carbonation depth. The subject and aim of this research paper are to examine indicator solutions from Alizarin Yellow R, Thymol Blue and a Mixed Indicator. These indicator solutions are commercially available and are not suspected to be carcinogenic. For the purpose of this research, samples previously stored under accelerated carbonation conditions (1% CO2) were examined by thermogravimetric analysis (TGA) and examination of the pH value. Additionally, the electrolytic back-titration for determination of total CO2 amount was carried out comparatively to TGA. KW - Thermal analysis KW - Accelerated carbonation KW - pH-indicators KW - Concrete PY - 2020 DO - https://doi.org/10.1016/j.cemconcomp.2020.103565 VL - 109 SP - 1 EP - 9 PB - Elsevier Ltd. AN - OPUS4-50458 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kühne, Hans-Carsten A1 - Raupach, M. A1 - Bastert, H. A1 - Eßer, A. A1 - Gehlen, Ch. A1 - Hintzen, W. A1 - Hohberg, I. A1 - Reichling, K. A1 - Westendarp, A. A1 - Wiens, U. A1 - Wolff, L. T1 - Neue Regeln braucht das Land - Die neue Instandhaltungs-Richtlinie des Deutschen Ausschuss für Stahlbeton (DAfStb), Teil 1 N2 - Mit Veröffentlichung der europäischen Normenreihe EN 1504 in den Jahren 2004 bis 2008 mussten in Deutschland die bisherigen nationalen Regelungen für die Instandsetzung von standsicherheitsrelevanten Betonbauteilen angepasst werden. Im vorliegenden Entwurf der neuen Instandhaltungs-Richtlinie wurden die Hinweise zur Planung und Durchführung von Instandsetzungsmaßnahmen aus der Instandsetzungsrichtlinie des DAfStb von 2001 entsprechend überarbeitet und aufgrund neuer Erkenntnisse ergänzt. Außerdem wurde das Regelwerk um Gesichtspunkte der Instandhaltung erweitert, sodass die Aspekte Wartung, Inspektion und Verbesserung nun in Anlehnung an DIN 31051 berücksichtigt werden. Zudem wurden Regelungen aus der ZTV-ING sowie der ZTV-W übernommen. Im ersten Teil dieses Artikels geben wir einen Überblick über die Gliederung und wesentliche neue Inhalte wie die Ausweitung der Instandsetzungsprinzipien. KW - Betoninstandsetzung PY - 2016 SN - 2190-9504 VL - 39. Jahrgang IS - 2.2016 SP - 16 EP - 23 PB - Verlagsgesellschaft Rudolf Müller GmbH & Co. KG CY - Köln AN - OPUS4-37167 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kühne, Hans-Carsten A1 - Raupach, M. A1 - Bastert, H. A1 - Eßer, A. A1 - Gehlen, Ch. A1 - Hintzen, W. A1 - Hohberg, I. A1 - Reichling, K A1 - Westendarp, A. A1 - Wiens, U. A1 - Wolff, L. T1 - Das Bauwerk stellt die Anforderungen - Die neue Instandhaltungs-Richtlinie des Deutschen Ausschusses für Stahlbeton (DAfStb), Teil 2 N2 - In einer Artikelserie stellen wir die neue Instandhaltungs-Richtlinie des Deutschen Ausschusses für Stahlbeton (DAfStb) vor. Im zweiten Teil geht es um Betonersatz- und Oberflächenschutzsysteme sowie Rissfüllstoffe. Es werden als Folge des EuGH-Urteils vom Oktober 2014 zukünftig keine Anforderungen an Bauprodukte mit dem Nachweis über allgemeine bauaufsichtliche Prüfzeugnisse gestellt. Stattdessen werden auf Basis der Anforderungen individueller Bauwerke notwendige Merkmale von Bauprodukten für die Instandsetzung definiert. Außerdem wird Teil 3 der neuen Instandhaltungs-Richtlinie "Ausführung der Instandsetzung und Überwachung" vorgestellt. Neu ist hier die Einführung von Überwachungsklassen, die sich aus der Art des instand zu setzenden Betonbauteils (standsicherheitsrelevant oder nicht) und der auszuführenden Arbeiten ergeben, zum Beispiel Instandsetzung oder Verstärkung. Am Ende dieses Artikels wird kurz der 4. Teil der neuen Instandhaltungs-Richtlinie erläutert. KW - Betoninstandsetzung PY - 2016 SN - 2190-9504 VL - 39. Jahrgang IS - 3.2016 SP - 51 EP - 55 PB - Verlagsgesellschaft Rudolf Müller GmbH & Co. KG CY - Köln AN - OPUS4-37168 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Multifunktionelle Nano-Zusätze für Hochleistungs-Betonwerksteine UNACON-Projekt T2 - Öffentliches INNONET Abschlusstreffen CY - Berlin, Germany DA - 2009-01-15 PY - 2009 AN - OPUS4-18907 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Raupach, M. T1 - Einfluss ausgewählter Modifikationen der Mischungszusammensetzung auf die Eigenschaften von Instandsetzungsmörteln N2 - Trotz der zahlreichen Möglichkeiten zur Beeinflussung der Mörteleigenschaften durch Mischungsmodifikationen ist es nahezu unmöglich, einzelne Eigenschaften unabhängig von anderen zu verändern. Bei einer Mischungsoptimierung muss im Einzelfall immer entschieden werden, welcher der gewünschten Eigenschaften die höchste Priorität zukommt. Anhand von Parameterstudien wird im vorliegenden Artikel verdeutlicht, wie es für bestimmte Anwendungen sinnvoll sein kann, die Verschlechterung einzelner Eigenschaften zu akzeptieren, wenn dadurch eine für den speziellen Einsatzfall essenzielle Eigenschaft verbessert werden kann. Die komplexen Wechselwirkungen der einzelnen Bestandteile fuhren dazu, dass auch scheinbar widersprüchliche Kombinationen von Zusatzmitteln im Einzelfall erforderlich werden können. Zur Anpassung der meisten Mörteleigenschaften gibt es verschiedene Möglichkeiten der Zielerreichung mit jeweils unterschiedlichen Nebeneffekten. Frisch- und Festmörteleigenschaften sind dabei gleichermaßen zu beachten. T2 - 2. Kolloquium "Erhaltung von Bauwerken" CY - Ostfildern/Stuttgart, Germany DA - 25.01.2011 KW - Betoninstandsetzung KW - Instandsetzungsmörtel KW - Modulare Systeme KW - Polymer cement mortar (PCC) KW - Sprayed polymer cement mortar (SPCC) PY - 2011 SN - 3-924813-87-6 SP - 213 EP - 221 AN - OPUS4-23218 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Qualitätsüberwachung und Beurteilung der Konformität - Teil 3: Statisch und nicht statisch relevante Inastandsetzung T2 - Fachtagung DIN EN 1504 - Europäische Norm für Schutz und Instandstzung von Betontragwerken CY - Ostfildern, Germany DA - 2008-11-29 PY - 2008 AN - OPUS4-18419 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühne, Hans-Carsten A1 - Maultzsch, Matthias A1 - Mellmann, Günter ED - Seiler, P. T1 - Einflüsse auf die Abreißfestigkeit von Betonuntergründen T2 - Industrieböden '07 CY - Ostfildern DA - 2007-01-16 PY - 2007 SN - 3-924813-68-X SN - 978-3-924813-68-0 VL - 2 SP - 713 EP - 718 PB - Techn. Akad. Esslingen CY - Ostfildern AN - OPUS4-14767 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit A1 - Fontana, Patrick A1 - Müller, Urs A1 - Kühne, Hans-Carsten T1 - Nanotechnologische Anwendungen im Baustoffbereich T2 - Nanotechnologie und Bauwesen (NanoTecture) CY - Düsseldorf DA - 2006-12-05 KW - Nanotechnologie KW - Analytik KW - Gefüge KW - Zement KW - Beton PY - 2006 SP - 13 EP - 27 CY - Düsseldorf AN - OPUS4-15703 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Properties of repair mortars - potentials and risks of a tailor-made mixture proportioning N2 - Despite the numerous possibilities to influence the properties of repair mortars by modifications of the mixture proportioning, it is almost impossible to change an individual property without influencing other mortar properties. When optimising a mixture, it has to be decided for each individual case, which of the mortar properties needs to be treated with the highest priority. Most properties can be altered by several different measures, which may vary in effectiveness, side effects and cost efficiency. As the prevention of shrinkage induced constraining cracks is crucial for the durability and Service life of a concrete repair task, in the presented paper special attention is paid to the influences on the mortar’s shrinkage behaviour. On the basis of parameter studies it is shown, how it may be beneficial in certain cases to accept the worsening of some general properties if by this measure another property, which is essential for the individual application task, can be enhanced significantly. In general a tailor-made approach for the mixture proportioning seems beneficial but due to the complexity of the constituents’ interactions in repair mortars, it bears a high risk of unexpected malfunctions. T2 - Concrete-Workshop 'Performance-based specifications for concrete' CY - Leipzig, Germany DA - 14.06.2011 KW - Repair mortar KW - Concrete rehabilitation KW - Repair systems KW - Polymer cement mortar (PCC) KW - Sprayed polymer cement mortar (SPCC) PY - 2011 SN - 978-3-9814523-0-3 SP - 319 EP - 329 AN - OPUS4-23985 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Drochytka, R. ED - Bohus, S. T1 - Natural stone reprofiling in cultural heritage with modular repair mortars N2 - Whenever the preservation of original substance obtains priority in a restoration task, reprofiling techniques using repair mortars are a welcome solution. For ordinary concrete repair aesthetic aspects are of minor importance whereas for the restoration of natural stone elements they come to the fore. Especially for listed buildings and monuments, historico-cultural and aesthetical interests become the ruling Parameters for planning and execution of restoration tasks. Nevertheless the technical and constructive requirements have to be considered and deterioration processes have to be understood to ensure sustainability and durability of the repair task. Due o differences in the Chemical and mineralogical composition, natural stone provides a vast variety of texture and colour. Also the range of different mechanical and durability related properties is far wider than found with concrete for example. A research project dealing with the development of a modular repair mortar System for natural stone is currently set up at the BAM. To provide the conservator with the best possible options to match colour, texture and technical requirements, the System will be setup on a modular basis. Several different binder Systems on basis of cement, lime and sodium Silicate as well as polymer based Systems are planned, which can be combined with different aggregate compositions and different pigments. To evaluate the mortar performance, test procedures will be defined for tests on mortar samples and on composite specimens. In the paper the experimental Programme will be explained and first results will be presented and discussed. T2 - 2nd WTA - Internaitonal PhD Symposium - Building materials and buidling technology to preserve the built heritage CY - Brno, Czech Republic DA - 06.10.2011 PY - 2011 SN - 978-3-937066-21-9 SN - 0947-6830 N1 - Serientitel: WTA-Schriftenreihe – Series title: WTA-Schriftenreihe IS - 36 SP - 208 EP - 216 PB - WTA Publications AN - OPUS4-24837 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Sander, C. A1 - Kühne, Hans-Carsten A1 - Ünal, Murat A1 - Kleine, M. A1 - Köhler, A. A1 - Kriesten, V. T1 - Betondickglasfenster - Schadensmechanismen und Instandsetzungsprinzipien zur Erhaltung N2 - Errichtet aus Glas und Beton prägen heute unzählige Sakralbauten der 1950er- und 60er-Jahre unsere Stadtbilder. Nicht selten sind in diesen Kirchen erhebliche Schäden an den Betonglasfenstern zu verzeichnen. Diese fachgemäß zu erhalten, erfordert spezielles technisches und denkmalpflegerisches Know-how. An der Entwicklung geeigneter Instandsetzungsstrategien arbeitet derzeit ein interdisziplinäres Projektteam. KW - Betonglasrestaurierung KW - Schadensmechanismen KW - Instandsetzungsprinzipien KW - Glass KW - (Reinforced) concrete KW - Church windows KW - Churches KW - Structural analysis KW - Concrete block technique KW - Reinforcement KW - Dalle de verre PY - 2011 SN - 0933-4017 VL - 7 SP - 48 EP - 53 PB - Callwey CY - München AN - OPUS4-24834 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Entwicklung von Instandsetzungsstrategien zur Restaurierung von Betonglasfenstern - Schadensprozesse und Lösungsansätze - T2 - Kolloquium Betonglasrestaurierung CY - Paderborn, Germany DA - 2011-10-10 PY - 2011 AN - OPUS4-24794 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat A1 - Kühne, Hans-Carsten ED - Rogge, A. ED - Meng, B. T1 - Reparaturmörtel und Instandsetzungstechniken zur Restaurierung von Betonverglasungen T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Deutschland DA - 2011-11-07 PY - 2011 SN - 978-3-9814281-0-0 SP - 227 EP - 237 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25179 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Kunstsein statt Tuff-Bildhauerbeton T2 - Innovation Beton - Forum Zunkunft Bauen CY - Neumünster, Germany DA - 2011-09-12 PY - 2011 AN - OPUS4-25053 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Neue Entwicklungen in der Normung für den Schutz und die Instandsetzung von Betonbauwerken T2 - Kolloquium "Sachkundiger Planer - Schadensdiagnose und Instandsetzung", Fortbildungsveranstaltung des Bau-Überwachungsvereins (BÜV) in Kooperation mit der BAM, BAM CY - Berlin, Germany DA - 2011-12-02 PY - 2011 AN - OPUS4-25054 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Shamsuddoha, Md A1 - Hüsken, Götz A1 - Baeßler, Matthias A1 - Kühne, Hans-Carsten A1 - Thiele, Marc T1 - Critical factors affecting the capacity of cylindrical grouted connections in offshore energy structures N2 - Current trend suggests that global energy consumption will increase in the future. This growing energy demand and advancement of technology lead to explore all potential offshore fossil and non-fossil energy sources, necessitating erection of exploration and production structures, rigs, platforms and towers, which are susceptible to adverse environmental conditions along with their maintenances. Cylindrical grouted joints provide suitable connections between steel substructure and foundation in these offshore platforms and wind structures especially monopiles for ease of installation. However, these are composite connections with exterior sleeve, interior pile and infill grout. The capacity of these connections is affected by number of factors. The literature over last four decades by numerous researchers has shown the development of these connections with increasingly higher capacities and influences on these capacities due to various factors. This paper provides a comprehensive review on the factors affecting the connection capacity along with technical challenges for the future. Critical aspects and shortcomings of the current connection systems and potential solutions may be sought after for these issues are also discussed. T2 - 36th International Conference on Ocean, Offshore and Arctic Engineering CY - Trondheim, Norway DA - 25.06.2017 KW - Offshore wind energy KW - Grouted connection KW - Joint capacity KW - Shear keys PY - 2017 SN - 978-0-7918-5766-3 DO - https://doi.org/10.1115/OMAE2017-62510 VL - 3B SP - UNSP V03BT02A037, 1 EP - 10 AN - OPUS4-42387 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Shamsuddoha,, Md A1 - Hüsken, Götz A1 - Pirskawetz, Stephan A1 - Baeßler, Matthias A1 - Kühne, Hans-Carsten A1 - Thiele, Marc T1 - Remediation of Cracks Formed in Grouted Connections of Offshore Energy Structures under Static Loads N2 - The future energy demand necessitates the exploration of all potential energy sources both onshore and offshore. Global trend has shifted towards offshore energy, which can be obtained from either carbon intensive or renewable options, hence requiring structures such as rigs, platforms, and monopiles. Most of these structures adopt easily installable construction techniques, where lower foundation need to be connected with the super structure by mean of grouted composite joints. Generally, these composite connections have exterior sleeve, interior pile and infill grout. Being located in remote offshore conditions, connections can experience considerable adverse loading during their lifetimes. Degradations were reported inside similar connections, which were installed in last three decades. Besides, grouting in the offshore sites may often be proven difficult, which eventually leads to reduced capacity of connections in the long run. Thus, repair and rehabilitation of such connections should be planned ahead to minimize operational delays and costs in the future. This study aims at characterizing the nature of crack generation in grouted connections and thereby identifying the potential of repair using suitable repair material. Scaled grouted joints were manufactured using a novel mold, and connections were loaded under static load to visualize the main failure pattern. The failure mechanism and loading capacity are found compatible to previous results from earlier literature. Grouted connection was then repaired using cementitious injectable grout. The effectiveness of the repair system is also discussed. T2 - Twenty-eighth (2018) International Ocean and Polar Engineering Conference CY - Sapporo, Japan DA - 10.06.2018 KW - Offshore KW - Energy KW - Grouted Connection KW - Cracks KW - Repair KW - Rehabilitation PY - 2018 SP - 120 EP - 126 AN - OPUS4-45227 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Technique for the protection and repair of concrete structures - a useful task for affected historical glass-concrete windows T2 - Fachtagung "Walls of Light and Colour", Dalles de Verres and Windows without Lead, History, Creation and Conversation, University of York CY - York, England DA - 2010-03-09 PY - 2010 AN - OPUS4-21009 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Project "UNACON" - Use of multifunctional Nano-Additions for innovative high-performance CONcrete stones T2 - Konferenz der Fördermittelgeber und Forschungsträger im 7. Rahmenprogramm der EU Sektion "Evaluation CORNET und ERASME" CY - Berlin, Germany DA - 2010-01-29 PY - 2010 AN - OPUS4-21005 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Cement and Concrete Technology T2 - Fachtagung "Walls of Light and Colour", Dalles de Verres and Windows without Lead, History, Creation and Conversation, University of York CY - York, England DA - 2010-03-09 PY - 2010 AN - OPUS4-21010 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat A1 - Kühne, Hans-Carsten T1 - Schutz und Instandsetzung von Betonglasfenstern des 20. Jahrhunderts T2 - Workshop "Betonglasrestaurierung" CY - Paderborn, Germany DA - 2010-03-02 PY - 2010 AN - OPUS4-21008 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ramge, Peter A1 - Proske, T. A1 - Kühne, Hans-Carsten ED - Khayat, K.H. ED - Feys, D. T1 - Segregation of coarse aggregates in self-compacting concrete N2 - A major requirement on self-compacting concrete (SCC) is the resistance to any kind of separation. In the presented studies the segregation behavior of aggregates was analyzed systematically. The rheology of selfcompacting mortars was dealt with at first. Following, the segregation of particles of different size, shape and density in various mortars was examined. The aim was to find an analytical relation to estimate the risk of sedimentation, using the characteristics of the particles and those of the mortars. The classification of the aggregates according to their potential segregation is rather simple. But the description of the segregation resistance of the mortar is much more difficult. It is not possible to evaluate a mortar solely based on the rheological properties. The mixture composition must always be considered as well. Tests on concrete samples were conducted additionally to determine the influence of the overall system of SCC on the sedimentation of the aggregates. T2 - SCC2010 - Design, production and placement of self-consolidating concrete CY - Montreal, Canada DA - 2010-09-26 KW - Rheology KW - Segregation KW - Static yield stress KW - Mixture proportioning KW - Aggregates KW - Rheologie KW - Sedimentation KW - Statische Fließgrenze KW - Mischungszusammensetzung KW - Gesteinskörnung PY - 2010 SN - 978-90-481-9663-0 DO - https://doi.org/10.1007/978-90-481-9664-7_10 N1 - Serientitel: RILEM bookseries – Series title: RILEM bookseries VL - 1 IS - 3 SP - 113 EP - 125 PB - Springer AN - OPUS4-22298 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Vasilic, Ksenija A1 - Roussel, N. A1 - Meng, Birgit A1 - Kühne, Hans-Carsten ED - Khayat, K.H. ED - Feys, D. T1 - Computational modeling of SCC flow through reinforced sections N2 - Computational modeling of fresh SCC flow is a comprehensive and time consuming task. The computational time is additionally increased when simulating casting of reinforced sections, where each single reinforcement bar has to be modeled. In order to deal with this issue and to decrease the computational time, an innovative approach of treating a reinforcement network as a porous medium is applied. This contribution presents the model for concrete flow through reinforced sections, based on Computational Fluid Dynamics (CFD), coupling a single-phase flow model for SCC and a continuum macroscopic model for porous medium. In the last part of this paper, numerical simulations are compared with experimental results obtained on model fluids. T2 - SCC2010 - Design, production and placement of self-consolidating concrete CY - Montreal, Canada DA - 2010-09-26 PY - 2010 SN - 978-90-481-9663-0 DO - https://doi.org/10.1007/978-90-481-9664-7_16 N1 - Serientitel: RILEM bookseries – Series title: RILEM bookseries VL - 1 IS - 5 SP - 187 EP - 195 PB - Springer AN - OPUS4-22277 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Technische Umsetzung und Verwendung der DIN EN 1504-3 für Instandsetzungsmörtel und -betone in Deutschland T2 - DBV Arbeitstagung: Schutz und Instandsetzung von Betonbauteilen - Aktuelle Regelwerke und Hinweise zum Stand der Technik CY - Berlin, Germany DA - 2010-11-02 PY - 2010 AN - OPUS4-22364 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Technische Umsetzung und Verwendung der DIN EN 1504-3 für Instandsetzungsmörtel und -betone in Deutschland? KW - Betoninstandsetzung KW - DIN EN 1504 KW - Instandsetzungsmörtel PY - 2010 N1 - Serientitel: Heftreihe Deutscher Beton- und Bautechnik-Verein e.V. – Series title: Heftreihe Deutscher Beton- und Bautechnik-Verein e.V. IS - 19 SP - 35 EP - 49 AN - OPUS4-22315 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Littmann, K. T1 - Parameterstudien zum Einfluss von Rezepturveränderungen auf Schwindverhalten, Rissneigung und Steifigkeit mineralischer Instandsetzungsmörtel T2 - 7. Internationales Kolloquium Industrieböden 2010 CY - Ostfildern, Deutschland DA - 2010-12-14 KW - Betoninstandsetzung KW - Instandsetzungsmörtel KW - Modulare Systeme KW - Haftverbund KW - SPCC KW - PCC PY - 2010 SN - 3-924813-85-X IS - Kap. 2.6 SP - 191 EP - 200 AN - OPUS4-22845 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Development of a modular system for the protection and repair of concrete structures KW - Repair mortar KW - Repair systems KW - Polymer cement concrete (PCC) KW - Sprayed polymer cement concrete (SPCC) PY - 2010 SN - 1864-7251 SN - 0947-4498 VL - 16 IS - 4/5 SP - 387 EP - 400 PB - Aedificatio Publ. CY - Freiburg AN - OPUS4-22773 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat A1 - Kühne, Hans-Carsten A1 - Kleine, M. A1 - Sander, C. T1 - Development and design of repair and protection principles and a concrete repair mortar for the conservation of slab glass set in concrete from the 20th century N2 - Main topics of the research project BEGLARES are the restoration of "dalle de verre" concrete Windows and the development of repair techniques and mortars. This project is executed in Cooperation between Glasmalerei Peters GmbH, the University of York and the BAM Federal Institute for Materials Research and Testing. It is funded by the Federal Ministry of Economics and Technology. The main mechanism of damages, the development of repair mortar and special test specimens are presented. T2 - GLASSAC 11 - 3rd GLASSAC Conference 'Glass science in art and conservation' CY - Wertheim, Bronnbach Monastery, Germany DA - 10.05.2011 KW - Concrete glazing KW - Carbonation KW - Maintenance planning KW - Actual state analysis PY - 2011 SN - 978-3-8396-0255-3 SP - 43 EP - 46 PB - Fraunhofer Verlag AN - OPUS4-23730 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Einfluss ausgewählter Modifikationen der Mischungszusammensetzung auf die Eigenschaften von Instandsetzungsmörteln N2 - Trotz der zahlreichen Möglichkeiten zur Beeinflussung der Mörteleigenschaften durch Mischungsmodifikationen ist es nahezu unmöglich, einzelne Eigenschaften unabhängig von anderen zu verändern. Bei einer Mischungsoptimierung muss im Einzelfall immer entschieden werden, welcher der gewünschten Eigenschaften die höchste Priorität zukommt. Anhand von Parameterstudien wird im vorliegenden Artikel verdeutlicht, wie es für bestimmte Anwendungen sinnvoll sein kann, die Verschlechterung einzelner Eigenschaften zu akzeptieren, wenn dadurch eine für den speziellen Einsatzfall essenzielle Eigenschaft verbessert werden kann. Die komplexen Wechselwirkungen der einzelnen Bestandteile fuhren dazu, dass auch scheinbar widersprüchliche Kombinationen von Zusatzmitteln im Einzelfall erforderlich werden können. Zur Anpassung der meisten Mörteleigenschaften gibt es verschiedene Möglichkeiten der Zielerreichung mit jeweils unterschiedlichen Nebeneffekten. Frisch- und Festmörteleigenschaften sind dabei gleichermaßen zu beachten. KW - Instandsetzungsmörtel KW - Betoninstandsetzung KW - Instandsetzungssysteme KW - Polymer-Zement Beton (PCC) KW - Polymer-Zement Spritzbeton (SPCC) KW - Repair mortar KW - Concrete rehabilitation KW - Repair systems KW - Polymer cement concrete (PCC) KW - Sprayed polymer cement concrete (SPCC) PY - 2011 SN - 1864-7251 SN - 0947-4498 VL - 17 IS - 3/4 SP - 169 EP - 180 PB - Aedificatio Publ. CY - Freiburg AN - OPUS4-24479 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Repair mortars for the restoration and reprofiling of natural stone elements in cultural heritage N2 - For the protection of the world's cultural heritage the restoration of listed buildings and monuments is an important task. In many cases the need to repair and reprofile natural stone elements occurs. Repair mortars for such applications have to match historicocultural interests as well as durability related and constructive interests. Currently a research project dealing with the development and optimisation of such mortars is set up at the BAM. Special focus is laid on the possibility of a modular adaption to match a vast variety of stone properties. Besides the development and lab scale testing of the mortar system, an in-situ application will be planned and executed. T2 - EWCHP-2011 - European workshop on cultural heritage preservation CY - Berlin, Germany DA - 26.09.2011 KW - Repair mortar KW - Natural stone KW - Stone restoration KW - Stone reprofiling KW - Modular system KW - Listed buildings and monuments PY - 2011 SN - 978-3-8167-8560-6 SP - 281 EP - 288 AN - OPUS4-24561 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat A1 - Kühne, Hans-Carsten T1 - Dalles de verre - damage mechanisms, maintenance techniques and mortars for restoration N2 - The present article gives an insight into the research project BEGLARES. Main topics are the restoration “Dalles de Verre” Windows and the development of repair mortars and techniques. This project is executed in cooperation between Glasmalerei Peters GmbH, the University of York, and the BAM Federal Institute for Materials Research and Testing. It is funded by the Federal Ministry of Economics and Technology. The main mechanism of damage, Standards for protection and repair of concrete structures, and the development of repair mortar and special test specimens are presented. T2 - EWCHP-2011 - European workshop on cultural heritage preservation CY - Berlin, Germany DA - 26.09.2011 KW - Dalles de verre KW - Carbonation KW - Maintenance planning KW - Current state analysis KW - Repair techniques PY - 2011 SN - 978-3-8167-8560-6 SP - 289 EP - 293 AN - OPUS4-24560 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühne, Hans-Carsten A1 - Maultzsch, Matthias A1 - Wolff, L. A1 - Meng, Birgit A1 - Raupach, M. ED - Maultzsch, M. T1 - Long-term performance of surface protection systems for concrete T2 - 11th International Congress on Polymers in Concrete (ICPIC `04) CY - Berlin, Germany DA - 2004-06-02 KW - Surface protection system KW - Concrete KW - Weathering KW - Water uptake KW - Freezethaw resistance KW - Chloride ingress KW - Carbonation KW - Hydrophobic treatment PY - 2004 SN - 3-00-013706-8 SP - 417 EP - 428 PB - BAM CY - Berlin AN - OPUS4-3602 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Long-term perfomance of surface protection systems for concrete T2 - ICPIC '04 - 11th International Congress on Polymers in Concrete CY - Berlin, Germany DA - 2004-06-02 PY - 2004 AN - OPUS4-3603 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Meng, Birgit A1 - Kühne, Hans-Carsten A1 - Nemecek, J. A1 - Fontana, Patrick ED - E. Fehling, ED - Schmidt, M. ED - S. Stürwald, T1 - Micro texture and mechanical properties of heat treated and autoclaved Ultra High Performance Concrete (UHPC) KW - Ultra high performance concrete KW - Micro texture KW - Mechanical strength KW - Secondary cemetitious materials PY - 2008 SN - 978-3-89958-376-2 IS - 10 SP - 213 EP - 220 CY - Kassel AN - OPUS4-16726 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Instandsetzungmörtel und -betone gemäß DIN EN 1504-3 ("Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Qualitätsüberwachung und Beurteilung der Konformität - Teil 3: Statisch und nicht statisch relevante Instandsetzung") T2 - Fachtagung Instandsetzen von Betonbauteilen CY - Leipzig, Germany DA - 2008-09-25 PY - 2008 AN - OPUS4-18202 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Instandsetzungmörtel und -betone gemäß DIN EN 1504-3 ("Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Qualitätsüberwachung und Beurteilung der Konformität - Teil 3: Statisch und nicht statisch relevante Instandsetzung") T2 - Fachtagung Instandsetzen von Betonbauteilen CY - Rostock, Germany DA - 2008-10-02 PY - 2008 AN - OPUS4-18204 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Instandsetzungmörtel und -betone gemäß DIN EN 1504-3 ("Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Qualitätsüberwachung und Beurteilung der Konformität - Teil 3: Statisch und nicht statisch relevante Instandsetzung") T2 - Fachtagung Instandsetzen von Betonbauteilen CY - Berlin, Germany DA - 2008-09-11 PY - 2008 AN - OPUS4-18205 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten T1 - Instandsetzungmörtel und -betone gemäß DIN EN 1504-3 ("Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken -Definitionen, Anforderungen, Qualitätsüberwachung und Beurteilung der Konformität - Teil 3: Statisch und nicht statisch relevante Instandsetzung") T2 - Fachtagung Instandsetzen von Betonbauteilen CY - Erfurt, Germany DA - 2008-09-16 PY - 2008 AN - OPUS4-18203 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -